Hi ,
I soft bricked my huawei honor 3c and have successfully resolved the issue . My phone was in boot loop and i could not Unbrick it with SDCRAD firmware auto update . So i had to flash the original signed recovery (link below) and then i could auto update from the SDCARD . The complete tutorial and links to files used is in the following link.
https://forum.lowyat.net/index.php?showtopic=3237141&st=1260&p=68534687&#entry68534687
I thought ill post it to help others having the same problem and also the additional steps that i performed.
You have to have the Service drivers and SP Flash tool version available on the above link.
Troubleshooting
if your phone is not detecting drivers and is in a loop of vibrating after every few seconds , then remove the battery , connect it to the computer and immediately put the battery back. If its still not working , then probably you need to remove and reinstall the drivers.
Disclaimer
I did not write the guide available at the above link , I only share the above resources and will not be responsible for any consequences with your phone and yourself for using the files and information above. Flash at your own risk and I cannot guarantee your success.
How do i use sp flash to unbrick. pls help me.
Hello,
i have huawei honor 3c h30-u10 phone. The prophet i am facing is when i calls to anyone there is robotic voice others person hearing when i speak, but disconnecting and call second time remove this problem. I am facing this often and costing money due to extra calls.
Anyone has any idea what is wrong?
What to do with no recovery and only vibration
My mobile is vibrationg like anything ...no power on , no recovery , no charging ... What should i do now?
styleevijesh said:
My mobile is vibrationg like anything ...no power on , no recovery , no charging ... What should i do now?
Click to expand...
Click to collapse
I encountered the same issue. hopefully someone will help and post a step by step solution.
thanks a lot in advance.
huawei honor h30-u10 keep restarting on logo
please help me how can i fix this issue.
obrhyn said:
I encountered the same issue. hopefully someone will help and post a step by step solution.
thanks a lot in advance.
Click to expand...
Click to collapse
same problem with my phone,
please help
putrafatih said:
same problem with my phone,
please help
Click to expand...
Click to collapse
The problem has been resolved
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
---------- Post added at 03:14 AM ---------- Previous post was at 03:10 AM ----------
styleevijesh said:
My mobile is vibrationg like anything ...no power on , no recovery , no charging ... What should i do now?
Click to expand...
Click to collapse
the issue like my phone ,but I have successfully resolved the issue.
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
^^ hi. how do you resolve the vibrating issue? thank you
still not working for me. my h30-u10 keeps vibrating. flashtool succeeded. but nothing happend. still vibrating
putrafatih said:
The problem has been resolved
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
---------- Post added at 03:14 AM ---------- Previous post was at 03:10 AM ----------
the issue like my phone ,but I have successfully resolved the issue.
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
Click to expand...
Click to collapse
Thanks mate your method work for me and now i can use my mobile normally. once again thanks man. and please upload the relevant file link or their forum area ..
putrafatih said:
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
Click to expand...
Click to collapse
I have the same problem but when I press [Firmware Upgrade] an error saying "No Valid Partition Management Table (PMT) for storage device", When press download an error saying "s security ac region not found in secro img"
Any help????????
No3man said:
I have the same problem but when I press [Firmware Upgrade] an error saying "No Valid Partition Management Table (PMT) for storage device", When press download an error saying "s security ac region not found in secro img"
Any help????????
Click to expand...
Click to collapse
Same Problem here... Found any solutions???
No3man said:
I have the same problem but when I press [Firmware Upgrade] an error saying "No Valid Partition Management Table (PMT) for storage device", When press download an error saying "s security ac region not found in secro img"
Any help????????
Click to expand...
Click to collapse
Any update????
No3man said:
I have the same problem but when I press [Firmware Upgrade] an error saying "No Valid Partition Management Table (PMT) for storage device", When press download an error saying "s security ac region not found in secro img"
Any help????????
Click to expand...
Click to collapse
click on DA dl all with checksum
Not work for me what can i do now i have honor 3c vibrate only
bazaid said:
Not work for me what can i do now i have honor 3c vibrate only
Click to expand...
Click to collapse
Watch tutorials on Youtube for step by step process.
Sent from my Galaxy Tab 3 using XDA Labs
Honor 3c vibrates only
adriansticoid said:
Watch tutorials on Youtube for step by step process.
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
I follow the steps
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorVa lue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorVa lue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
But my 3c still vibrates only after success full flashing
Also flash with b108 signed but noworks
bazaid said:
I follow the steps
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorVa lue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorVa lue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
But my 3c still vibrates only after success full flashing
Also flash with b108 signed but noworks
Click to expand...
Click to collapse
Maybe your partitions are destroyed now.
Sent from my honor 5X using XDA Labs
putrafatih said:
The problem has been resolved
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
---------- Post added at 03:14 AM ---------- Previous post was at 03:10 AM ----------
the issue like my phone ,but I have successfully resolved the issue.
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
Click to expand...
Click to collapse
Hello . when I connect my phone with PC to start the process my phone vibrate and windows detect it and then it vibrate again and disconnect And do this again and again so sp flash tool come with a fail . anyone know why my phone is doing this ( connect and disconnect and keep doing this until I remove USB cable )
Thanx
Use it if you cannot flash with any flash tool (no root needed)
Note: Use this at your own risk! Use it as a last resort!
I'm not responsable for anything, this may not work with yours
Sorry for my poor english. I tested this method with MY bricked LG F320L, no root, no boot, no many partition pop up, partial
downloadMode (just download mode and can't see the USB logo nor S/W update) then can't flash with KDZ/TOT file,with adb mode
recovery when holding pwr and vol+ ( lucky ), with stock recovery but I have to write adb reboot recovery to get it
what you need (sorry, I'm too lazy to put a direct link, I found all of them in xda):
- Install driver for your device
- .kdz file of your model
- WindowsLGFirmwareExtract-1.2.5.0-Release
- Send_Command.exe and ports.bat (ports.bat is optional if you know the port where your device is plunged can be in LG_root.zip)
This methode needs that you can access to downloadmode or partial downloadmode like me (vol+ and plug USB cable)
1- Run WindowsLGFirmwareExtract
. browse your .kdz file with "Open" button
. click to "Extract KDZ" button and wait until finish
. browse the .dz file abd extract it with the appropriat button
. click to "Extract DZ" button and wait until finish
. select all system files and clic Merge system-bin (you will get system.img in another folder and you don't need all system****.bin)
. copy all files in same folder
2- change extension of all files .bin to .img and remove any numbers
example: aboot156.bin => aboot.img / 1-aboot.bin =>aboot.img
3- Push or copy all files to your device. You have to find also the laf.img of your device, sometime it's not in the KDZ file.
Maybe it's optional, but I'm not sure.
Remember the path, for this tuto I'm using adb and push all files to /data/local/tmp/
You can also copy all files with another method
4- Run Ports.bat
Double click ports.bat (This will give us the COM port in which our device is connected we are looking for the Diag port)
keep in mind the COM of \Device\LG*******DIAG*
5- Go to downloadMode
6- Run send_command.exe in command prompt
type: Send_Command.exe \\.\COM3 if COM3 is the port where your device is pluged
wait for #
flash all .img like this, replace NAME by the name of the file ex: aboot.img replace NAME by aboot
dd if=/data/local/tmp/{NAME}.img of=/dev/block/platform/msm_sdcc.1/by-name/{NAME}
ex: dd if=/data/local/tmp/aboot.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Except for backupGPT.img, I don't know what is it. Maybe in this partition:
dd if=/data/local/tmp/backupGPT.img of=/dev/block/platform/msm_sdcc.1/by-name/gpt
personally , I have not flashed this one
If you have finished type: LEAVE
Flash completed
Thank you guy, your tuto saved my device
santatralalaina said:
Use it if you cannot flash with any flash tool (no root needed)
Note: Use this at your own risk! Use it as a last resort!
I'm not responsable for anything, this may not work with yours
Sorry for my poor english. I tested this method with MY bricked LG F320L, no root, no boot, no many partition pop up, partial
downloadMode (just download mode and can't see the USB logo nor S/W update) then can't flash with KDZ/TOT file,with adb mode
recovery when holding pwr and vol+ ( lucky ), with stock recovery but I have to write adb reboot recovery to get it
what you need (sorry, I'm too lazy to put a direct link, I found all of them in xda):
- Install driver for your device
- .kdz file of your model
- WindowsLGFirmwareExtract-1.2.5.0-Release
- Send_Command.exe and ports.bat (ports.bat is optional if you know the port where your device is plunged can be in LG_root.zip)
This methode needs that you can access to downloadmode or partial downloadmode like me (vol+ and plug USB cable)
1- Run WindowsLGFirmwareExtract
. browse your .kdz file with "Open" button
. click to "Extract KDZ" button and wait until finish
. browse the .dz file abd extract it with the appropriat button
. click to "Extract DZ" button and wait until finish
. select all system files and clic Merge system-bin (you will get system.img in another folder and you don't need all system****.bin)
. copy all files in same folder
2- change extension of all files .bin to .img and remove any numbers
example: aboot156.bin => aboot.img / 1-aboot.bin =>aboot.img
3- Push or copy all files to your device. You have to find also the laf.img of your device, sometime it's not in the KDZ file.
Maybe it's optional, but I'm not sure.
Remember the path, for this tuto I'm using adb and push all files to /data/local/tmp/
You can also copy all files with another method
4- Run Ports.bat
Double click ports.bat (This will give us the COM port in which our device is connected we are looking for the Diag port)
keep in mind the COM of \Device\LG*******DIAG*
5- Go to downloadMode
6- Run send_command.exe in command prompt
type: Send_Command.exe \\.\COM3 if COM3 is the port where your device is pluged
wait for #
flash all .img like this, replace NAME by the name of the file ex: aboot.img replace NAME by aboot
dd if=/data/local/tmp/{NAME}.img of=/dev/block/platform/msm_sdcc.1/by-name/{NAME}
ex: dd if=/data/local/tmp/aboot.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Except for backupGPT.img, I don't know what is it. Maybe in this partition:
dd if=/data/local/tmp/backupGPT.img of=/dev/block/platform/msm_sdcc.1/by-name/gpt
personally , I have not flashed this one
If you have finished type: LEAVE
Flash completed
Click to expand...
Click to collapse
help please
santatralalaina said:
Use it if you cannot flash with any flash tool (no root needed)
Note: Use this at your own risk! Use it as a last resort!
I'm not responsable for anything, this may not work with yours
Sorry for my poor english. I tested this method with MY bricked LG F320L, no root, no boot, no many partition pop up, partial
downloadMode (just download mode and can't see the USB logo nor S/W update) then can't flash with KDZ/TOT file,with adb mode
recovery when holding pwr and vol+ ( lucky ), with stock recovery but I have to write adb reboot recovery to get it
what you need (sorry, I'm too lazy to put a direct link, I found all of them in xda):
- Install driver for your device
- .kdz file of your model
- WindowsLGFirmwareExtract-1.2.5.0-Release
- Send_Command.exe and ports.bat (ports.bat is optional if you know the port where your device is plunged can be in LG_root.zip)
This methode needs that you can access to downloadmode or partial downloadmode like me (vol+ and plug USB cable)
1- Run WindowsLGFirmwareExtract
. browse your .kdz file with "Open" button
. click to "Extract KDZ" button and wait until finish
. browse the .dz file abd extract it with the appropriat button
. click to "Extract DZ" button and wait until finish
. select all system files and clic Merge system-bin (you will get system.img in another folder and you don't need all system****.bin)
. copy all files in same folder
2- change extension of all files .bin to .img and remove any numbers
example: aboot156.bin => aboot.img / 1-aboot.bin =>aboot.img
3- Push or copy all files to your device. You have to find also the laf.img of your device, sometime it's not in the KDZ file.
Maybe it's optional, but I'm not sure.
Remember the path, for this tuto I'm using adb and push all files to /data/local/tmp/
You can also copy all files with another method
4- Run Ports.bat
Double click ports.bat (This will give us the COM port in which our device is connected we are looking for the Diag port)
keep in mind the COM of \Device\LG*******DIAG*
5- Go to downloadMode
6- Run send_command.exe in command prompt
type: Send_Command.exe \\.\COM3 if COM3 is the port where your device is pluged
wait for #
flash all .img like this, replace NAME by the name of the file ex: aboot.img replace NAME by aboot
dd if=/data/local/tmp/{NAME}.img of=/dev/block/platform/msm_sdcc.1/by-name/{NAME}
ex: dd if=/data/local/tmp/aboot.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Except for backupGPT.img, I don't know what is it. Maybe in this partition:
dd if=/data/local/tmp/backupGPT.img of=/dev/block/platform/msm_sdcc.1/by-name/gpt
personally , I have not flashed this one
If you have finished type: LEAVE
Flash completed
Click to expand...
Click to collapse
@santatralalaina
I'm in a similar situation like you. No download, fastboot or recovery and phone is not detected by Windows. As u said PARTIAL Download mode only. I'm not very good with adb also. Could you please guide me about force pushing of the .img files please! Where can I get send command.exe and ports.bat? Could you please attach some screen shot of Step:6. Renaming the file and command is bit confusing for me.
sms473 said:
@santatralalaina
I'm in a similar situation like you. No download, fastboot or recovery and phone is not detected by Windows. As u said PARTIAL Download mode only. I'm not very good with adb also. Could you please guide me about force pushing of the .img files please! Where can I get send command.exe and ports.bat? Could you please attach some screen shot of Step:6. Renaming the file and command is bit confusing for me.
Click to expand...
Click to collapse
Hi, Don't panic! Take a deep breath.
Firstly: What is your phone model?
Secondly: What happen when you plug your phone to your PC?
Finaly: What you have did to try unbricking you phone?
santatralalaina said:
Hi, Don't panic! Take a deep breath.
Firstly: What is your phone model?
Secondly: What happen when you plug your phone to your PC?
Finaly: What you have did to try unbricking you phone?
Click to expand...
Click to collapse
Hi..thanks for the reply....My phone is G2 F320L..Korean version with removable battery and SD card....I tried to install a non compatible ROM..got bricked with only fastboot...Then I try to flash aboot.bin..boot.bin..laf.bin..etc files (which I have extracted from the kdz) through fastboot...during flashing my phone was disconnecting and connecting back again...thats where all the problem started I guess. Now I dont have fastboot also. If i connect my phone to PC.. LG logo comes on the phone screen...on PC it try to detect as LGE android MTP devices and try to install the driver of the same. But the driver installation fails eventually.... At windows device manager it show as LGE Android MTP devices with error code 10...and showing connected to port:COM3....If I try to get in to the download mode..it get stuck at the (.............) download page...it is not going to the page with big USB picture...
My thinking is...Since the device manager is showing that it is connected at COM3.....Can I force flash the boot.img, aboot.img, laf.img etc files with "Send command.exe?
At least I can try to force flash right? If it is possible..may be I will be able to enter in to the download mode:fingers-crossed: Right? Where can I get this "Send command.exe" and how it works?
sms473 said:
My thinking is...Since the device manager is showing that it is connected at COM3.....Can I force flash the boot.img, aboot.img, laf.img etc files with "Send command.exe?
At least I can try to force flash right? If it is possible..may be I will be able to enter in to the download mode:fingers-crossed: Right? Where can I get this "Send command.exe" and how it works?
Click to expand...
Click to collapse
Hello,
It was easy to unbrick the fastboot but now... ok, you are stuck in LG LOGO but after no black screen? can you charge you battery? And if you try to go to RecoveryMode, what's happen? do you have multiple partitions and QHSUSB_DLOAD trying to be instaled? It's also easy to unbrick the QHSUSB and if it is the case, don't use send_command to flash manualy your device.
Maybe, you can force flash. You have to find a solution to push all .img files to your device. If you cannot use ADB, try to put the img files to sdcard.
you can found send_command.exe and ports.bat in this zip file, it's an utilities for having root on LG G2 :
LG_Root.zip
you can use all root command with it!
Added to index thread
[INDEX][LG G2] ROMs, Kernels, Guides and more
can this fix demigod crash handler? it has a partial download mode (located in drivers, but LG Flash Tool gets stuck in 4%)
I have a f320k, and because it died (i await u to answer me and tell me if its possible that it will fix it(
i am currently using a nearly dead battery nexus 5.
reply in ur free time
Well, I need help. how do i copy these files to my device? my device is not located in adb. cant i just flash the files from there place in my pc?
hi - I have t mobile d801 .it has boot loop - show lg logo and then the android robot and then lg logo again.
it does enter download mode(but with the 4 blue dots - but in the device manager cant install the drivers.
when the phone is plugged in to computer normally without download mode' it shows lge phone and drivers in device manager.
I tried to flash kdz bit stuck on 60%. it shows on phone download mode - but not show the firmware update logo.
what should I do?? when I d.mode not the regular d.mode - device isn't detected in pc. so I think this is my main problem.
try with srk tools no luck. its says waiting for device..is there any solution? thanks!
foxyfoxyblah said:
can this fix demigod crash handler? it has a partial download mode (located in drivers, but LG Flash Tool gets stuck in 4%)
I have a f320k, and because it died (i await u to answer me and tell me if its possible that it will fix it(
i am currently using a nearly dead battery nexus 5.
reply in ur free time
Click to expand...
Click to collapse
Hi!
As I known, LG G2 is unbrickable
This method is for last resort because I havn't complete documentation about this!
I've tested it with my own LG F320L only
Try to flash with TOT files or LGUP
Try to repair the download mode http://forum.xda-developers.com/showthread.php?t=2706590
Try to force the QHS_USB to appear then use the appropriate tools http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
Try send_commande before shorting testpoint (it's less dangerous IN MY OPINION)
santatralalaina said:
Hi!
As I known, LG G2 is unbrickable
This method is for last resort because I havn't complete documentation about this!
I've tested it with my own LG F320L only
Try to flash with TOT files or LGUP
Try to repair the download mode http://forum.xda-developers.com/showthread.php?t=2706590
Try to force the QHS_USB to appear then use the appropriate tools http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
Try send_commande before shorting testpoint (it's less dangerous IN MY OPINION)
Click to expand...
Click to collapse
I don't have ADB, so most of these i cant do.
im scared of touching the motherboard....
so im not shorting test point.
santatralalaina said:
Use it if you cannot flash with any flash tool (no root needed)
Note: Use this at your own risk! Use it as a last resort!
I'm not responsable for anything, this may not work with yours
Sorry for my poor english. I tested this method with MY bricked LG F320L, no root, no boot, no many partition pop up, partial
downloadMode (just download mode and can't see the USB logo nor S/W update) then can't flash with KDZ/TOT file,with adb mode
recovery when holding pwr and vol+ ( lucky ), with stock recovery but I have to write adb reboot recovery to get it
what you need (sorry, I'm too lazy to put a direct link, I found all of them in xda):
- Install driver for your device
- .kdz file of your model
- WindowsLGFirmwareExtract-1.2.5.0-Release
- Send_Command.exe and ports.bat (ports.bat is optional if you know the port where your device is plunged can be in LG_root.zip)
This methode needs that you can access to downloadmode or partial downloadmode like me (vol+ and plug USB cable)
1- Run WindowsLGFirmwareExtract
. browse your .kdz file with "Open" button
. click to "Extract KDZ" button and wait until finish
. browse the .dz file abd extract it with the appropriat button
. click to "Extract DZ" button and wait until finish
. select all system files and clic Merge system-bin (you will get system.img in another folder and you don't need all system****.bin)
. copy all files in same folder
2- change extension of all files .bin to .img and remove any numbers
example: aboot156.bin => aboot.img / 1-aboot.bin =>aboot.img
3- Push or copy all files to your device. You have to find also the laf.img of your device, sometime it's not in the KDZ file.
Maybe it's optional, but I'm not sure.
Remember the path, for this tuto I'm using adb and push all files to /data/local/tmp/
You can also copy all files with another method
4- Run Ports.bat
Double click ports.bat (This will give us the COM port in which our device is connected we are looking for the Diag port)
keep in mind the COM of \Device\LG*******DIAG*
5- Go to downloadMode
6- Run send_command.exe in command prompt
type: Send_Command.exe \\.\COM3 if COM3 is the port where your device is pluged
wait for #
flash all .img like this, replace NAME by the name of the file ex: aboot.img replace NAME by aboot
dd if=/data/local/tmp/{NAME}.img of=/dev/block/platform/msm_sdcc.1/by-name/{NAME}
ex: dd if=/data/local/tmp/aboot.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Except for backupGPT.img, I don't know what is it. Maybe in this partition:
dd if=/data/local/tmp/backupGPT.img of=/dev/block/platform/msm_sdcc.1/by-name/gpt
personally , I have not flashed this one
If you have finished type: LEAVE
Flash completed
Click to expand...
Click to collapse
i have flashed wrong firmware ..now my phone have same symptoms like urs with partial download mode and no recovery....but i m unable to push files via adb bcz adb debugging is not active and i m getting error that phone not found.....now what can i dooo...plz plz plzzzz help me
I just wrote and shared my experiences. Forcing the qshusb by shorting the right pins in the motherboard is the only solution if you cannot push the img files to your phone with adb, by sdcard, by MTP or something else
santatralalaina said:
I just wrote and shared my experiences. Forcing the qshusb by shorting the right pins in the motherboard is the only solution if you cannot push the img files to your phone with adb, by sdcard, by MTP or something else
Click to expand...
Click to collapse
and how to do that?
Thank you your topic was helped me to find a solution for my phone lg g3