Hi ,
I soft bricked my huawei honor 3c and have successfully resolved the issue . My phone was in boot loop and i could not Unbrick it with SDCRAD firmware auto update . So i had to flash the original signed recovery (link below) and then i could auto update from the SDCARD . The complete tutorial and links to files used is in the following link.
https://forum.lowyat.net/index.php?showtopic=3237141&st=1260&p=68534687&#entry68534687
I thought ill post it to help others having the same problem and also the additional steps that i performed.
You have to have the Service drivers and SP Flash tool version available on the above link.
Troubleshooting
if your phone is not detecting drivers and is in a loop of vibrating after every few seconds , then remove the battery , connect it to the computer and immediately put the battery back. If its still not working , then probably you need to remove and reinstall the drivers.
Disclaimer
I did not write the guide available at the above link , I only share the above resources and will not be responsible for any consequences with your phone and yourself for using the files and information above. Flash at your own risk and I cannot guarantee your success.
How do i use sp flash to unbrick. pls help me.
Hello,
i have huawei honor 3c h30-u10 phone. The prophet i am facing is when i calls to anyone there is robotic voice others person hearing when i speak, but disconnecting and call second time remove this problem. I am facing this often and costing money due to extra calls.
Anyone has any idea what is wrong?
What to do with no recovery and only vibration
My mobile is vibrationg like anything ...no power on , no recovery , no charging ... What should i do now?
styleevijesh said:
My mobile is vibrationg like anything ...no power on , no recovery , no charging ... What should i do now?
Click to expand...
Click to collapse
I encountered the same issue. hopefully someone will help and post a step by step solution.
thanks a lot in advance.
huawei honor h30-u10 keep restarting on logo
please help me how can i fix this issue.
obrhyn said:
I encountered the same issue. hopefully someone will help and post a step by step solution.
thanks a lot in advance.
Click to expand...
Click to collapse
same problem with my phone,
please help
putrafatih said:
same problem with my phone,
please help
Click to expand...
Click to collapse
The problem has been resolved
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
---------- Post added at 03:14 AM ---------- Previous post was at 03:10 AM ----------
styleevijesh said:
My mobile is vibrationg like anything ...no power on , no recovery , no charging ... What should i do now?
Click to expand...
Click to collapse
the issue like my phone ,but I have successfully resolved the issue.
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
^^ hi. how do you resolve the vibrating issue? thank you
still not working for me. my h30-u10 keeps vibrating. flashtool succeeded. but nothing happend. still vibrating
putrafatih said:
The problem has been resolved
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
---------- Post added at 03:14 AM ---------- Previous post was at 03:10 AM ----------
the issue like my phone ,but I have successfully resolved the issue.
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
Click to expand...
Click to collapse
Thanks mate your method work for me and now i can use my mobile normally. once again thanks man. and please upload the relevant file link or their forum area ..
putrafatih said:
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
Click to expand...
Click to collapse
I have the same problem but when I press [Firmware Upgrade] an error saying "No Valid Partition Management Table (PMT) for storage device", When press download an error saying "s security ac region not found in secro img"
Any help????????
No3man said:
I have the same problem but when I press [Firmware Upgrade] an error saying "No Valid Partition Management Table (PMT) for storage device", When press download an error saying "s security ac region not found in secro img"
Any help????????
Click to expand...
Click to collapse
Same Problem here... Found any solutions???
No3man said:
I have the same problem but when I press [Firmware Upgrade] an error saying "No Valid Partition Management Table (PMT) for storage device", When press download an error saying "s security ac region not found in secro img"
Any help????????
Click to expand...
Click to collapse
Any update????
No3man said:
I have the same problem but when I press [Firmware Upgrade] an error saying "No Valid Partition Management Table (PMT) for storage device", When press download an error saying "s security ac region not found in secro img"
Any help????????
Click to expand...
Click to collapse
click on DA dl all with checksum
Not work for me what can i do now i have honor 3c vibrate only
bazaid said:
Not work for me what can i do now i have honor 3c vibrate only
Click to expand...
Click to collapse
Watch tutorials on Youtube for step by step process.
Sent from my Galaxy Tab 3 using XDA Labs
Honor 3c vibrates only
adriansticoid said:
Watch tutorials on Youtube for step by step process.
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
I follow the steps
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorVa lue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorVa lue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
But my 3c still vibrates only after success full flashing
Also flash with b108 signed but noworks
bazaid said:
I follow the steps
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorVa lue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorVa lue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
But my 3c still vibrates only after success full flashing
Also flash with b108 signed but noworks
Click to expand...
Click to collapse
Maybe your partitions are destroyed now.
Sent from my honor 5X using XDA Labs
putrafatih said:
The problem has been resolved
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
---------- Post added at 03:14 AM ---------- Previous post was at 03:10 AM ----------
the issue like my phone ,but I have successfully resolved the issue.
solution :
1. Install the required MTK USB drivers you downloaded earlier.
2. Download SP Flash Tool.zip on your PC and extract its contents.
3. Next, download “Honor3CBootUnlock.zip” on the computer and unzip it too.
4. Execute “FlashTool.exe” on the PC.
5. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
6. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
7. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
8. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
9. GREEN circle will be displayed if the download succeeded.
10. Now DISCONNECT the USB cable from your phone.
11. Download stock ROM for your EU set V100R001C432B111 (739 MB)
12. extract the file H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue.zip
13. Execute “FlashTool.exe” on the PC, Go to Download tab
14. click [Scatter-loading] and Select the extracted folder 'H30-U10_Firmware_V100R001C432B111_Norwegian_operatorValue' and click 'Open'.
15. Select 'MT6582_Android_scatter.txt' found in the signed ROM folder and click 'Open'.
16. The partitions info should be loaded, make sure ALL items are checked.
17. Press [Firmware Upgrade] button or 'F8' on keyboard.
18. SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
19. SPFT has successfully established a connection with the phone, the upgrade process will begin.
20. SP FlashTool will verify the input images and begin writing to the phone EMMC once the verification succeeded.
21. Upgrade in progress, this may take a few minutes...
22. GREEN circle will be displayed if the upgrade succeeded.
23. Now DISCONNECT the USB cable from your phone.
24. Re-insert battery to your phone, press [Volume Up] + [Power] button to enter recovery.
25. Perform a 'Factory Reset/Wipe data' before booting from the rom for the first time.
Click to expand...
Click to collapse
Hello . when I connect my phone with PC to start the process my phone vibrate and windows detect it and then it vibrate again and disconnect And do this again and again so sp flash tool come with a fail . anyone know why my phone is doing this ( connect and disconnect and keep doing this until I remove USB cable )
Thanx
Related
The Ultimate Kit Kat z1 guide
=Brief Introduction=
This thread will consist of information about Rooting, Flashtool, Bootloader, Kernel and Roms.
Xda have been helping me a lot, so I have decided to start with the most basic way to help. Hope everything is correct, if anything is wrong please leave a comment below. Thanks.
=Part 1 Rooting the latest KitKat 4.4.2 Firmware=
For Locked Bootloaders
Required files:
14.1.G.1.534 FTF file
Link: http://forum.xda-developers.com/showthread.php?t=2469191
(You many choose anyone you wish, for it will be overwritten after that)
Move file to C:\Flashtool\firmwares or wherever you installed flashtool to.
Root Many Android by Bin4ry
Link: http://uploaded.net/file/d2w6dl7r
Latest Flashtool
Link: http://www.flashtool.net/download.php
(Please make sure you use v9.15 and above)
Note: Please make sure fastboot and flashtool drivers are installed.
Help on installation on windows 8: http://forum.xda-developers.com/showthread.php?t=2095087
Dual Recovery
Link: http://forum.xda-developers.com/showthread.php?t=2647487
( Choose the latest version, read instructions on the site.)
14.2.A.0.290 Flashable files (C690X_14.2.A.0.290.flashable.zip and C690X_14.2.A.0.290_Stripped.ftf )
Link: http://forum.xda-developers.com/showthread.php?t=2572988
Note: Please transfer zip file to external sd card
Move ftf file to C:\Flashtool\firmwares or wherever you installed flashtool to.
14.3.A.0.681 Flashable files (C690X_14.3.A.0.681.flashable.zip and C690X_14.3.A.0.681_Stripped.ftf)
Link: http://forum.xda-developers.com/showthread.php?t=2687443
Note: Please transfer zip file to external sd card
Move ftf file to C:\Flashtool\firmwares or wherever you installed flashtool to.
Lets Get Started:
1. Make sure phone is charged to at least 50%
2. Enable USB Debugging on your phone and switch to MSC mode
How to: Setting >About Phone>Tap Build Number a few times > Go back > Enter developer options > Enable usb debugging
Setting >Xperia Connectivity> USB Connectivity> MSC mode
3. Back up all apps or app data you wish to keep (contacts, applications, messages and photos that are in your internal storage)
How to: Use Helium from Play Store to backup app data or any other apps, make sure backup is saved to cloud or external sd card
5. Flash 14.G.1.534 Firmware.
How to: Power off device.
Hold Volume Down button
Plug in USB cable to computer and phone
Open flashtool and click lightning.
CHoose flashmode.
Choose 14.1.G.1.534
And FLASH!
6. Root it
How to: Turn device on
Enable USB Debugging
Open Root with Bin4ry file and run 'Run Me' file
Connect phone to pc
Select 0 (xperia root by .......)
7. Install dual recovery
How to: Open dual recovery file and open 'Install' file
Choose option 1
Grant Superuser permissions when requested
Phone will reboot.
8. Install 14.2.A.0.290 Flashable zip
HOw to: power off Phone
POwer on phone
When phone vibrates press volume down
It will then enter recovery mode
Wipe ( enter Wipe > Advanced WIpe > Tick Everything but external sd card and Otg)
After wipe, press back and slide factory reset
Install zip ( press install and find file)
It will take a few minutes
Do not press reboot system, press back key until first page and then click reboot key.
Select power off.
9. INstall Stripped FTF 14.2.A.0.290
How to: Hold Volume DOwn button
Plug in usb cable to computer and phone
Open flashtool and click lightning.
CHoose flashmode.
Choose 14.2.A.0.290 Generic NCB
And FLASH!
10. Power on
11. Install 14.3.A.0.681 Flashable zip
HOw to: power off Phone
POwer on phone
When phone vibrates press volume down
It will then enter recovery mode
Wipe ( enter Wipe > Advanced WIpe > Tick Everything but external sd card and Otg)
After wipe, press back and slide factory reset
Install zip ( press install and find file)
It will take a few minutes
Do not press reboot system, press back key until first page and then click reboot key.
Select power off.
12. . INstall Stripped FTF 14.3.A.0.681
How to: Hold Volume DOwn button
Plug in usb cable to computer and phone
Open flashtool and click lightning.
CHoose flashmode.
Choose 14.2.A.0.290 Generic NCB
13. Reboot and you are done!
Unlocked Boot loader
Required Files:
14.3.A.0.681
Link: http://forum.xda-developers.com/showthread.php?t=2469191
Move file to C:\Flashtool\firmwares or wherever you installed flashtool to.
DoomKernel v10 or up ( or any other 4.4 kernel)
Link: http://forum.xda-developers.com/showthread.php?t=2448613
Unzip file.
SuperSu flashable zip
Link:http://forum.xda-developers.com/showthread.php?t=1538053
Transfer to external SD card
Latest Flashtool
Link: http://www.flashtool.net/download.php
(Please make sure you use v9.15 and above)
Note: Please make sure fastboot and flashtool drivers are installed.
Help on installation on windows 8: http://forum.xda-developers.com/showthread.php?t=2095087
Lets Get started:
1. Make sure phone is charged to at least 50%
2. Enable USB Debugging on your phone and switch to MSC mode
How to: Setting >About Phone>Tap Build Number a few times > Go back > Enter developer options > Enable usb debugging
Setting >Xperia Connectivity> USB Connectivity> MSC mode
3. Back up all apps or app data you wish to keep (contacts, applications, messages and photos that are in your internal storage)
How to: Use Helium from Play Store to backup app data or any other apps, make sure backup is saved to cloud or external sd card
4. Flash 14.3.A.0.681 Firmware.
How to: Power off device.
Hold Volume Down button
Plug in USB cable to computer and phone
Open flashtool and click lightning.
Choose 14.3.A.0.681
And FLASH!
5. Power on. Test if everything is working well, camera and others.
6. Fastboot DooMKernel
How to: Power off device.
Hold Volume Up button
Plug in USB cable to computer and phone
Open flashtool and click lightning.
Choose Fastboot
Choose Boot.img that was in the unzipped file
And FLASH!
7. Reboot and let phone start
8. Install root.
How to: Power off
POwer on phone
When phone vibrates press volume down
It will then enter recovery mode.
Install SuperSu file that was downloaded.
9. Reboot and you are READY!!
Reserved
Maybe to add something about bootloader unlock, to match the name of the thread would be useful :good:
Other than that, it is a great guide!
....actually not few but 7 times tap on Build Number to enable Developer Option where is USB Debugging....
....at last you can add also how to Deodex the Rom, after all this...
HotKillerZzz said:
Reserved
Click to expand...
Click to collapse
This information has already been covered many times in many different places.
Thread closed for being duplicate of existing threads.
Requirements :
1) Maui Meta Tool : DOWNLOAD HERE
2) MediaTek USB Vcom Drivers : DOWNLOAD HERE
3) Windows 7 PC ( Recommend )
Instructions :
1) Download USB driver zip, extract it and install the drivers on your Pc. (Ignore if already installed)
2) Download Maui Meta tool and Unzip it using 7zip or any other extracting software.
3) Open Maui Meta application as administrator.
4) Wait till the application dashboard appears.
5) Under connection type, Choose Smartphone.
6) Click Reconnect button at the top.
7) Now Switch off your android phone and connect it with your PC via USB Cable then Power On.
8) When the circle color change to yellow, it means that your phone successfully detected and your device will stuck on Boot logo. ( Maui Meta mode ).
9) Now Click on the Get Target Version to confirm your phone.
10) Your phone details appear.
Come back to the main dashboard of Maui Meta.
11) Choose iMei Download option from the dropdown menu.
12) IMEI Download box should be open in new tab. Click on Change NVRAM Database File.
13) In the new tab window, choose the path of BPLGUInfo file (often named like BPLGUInfoCustomAppSrcP_MT67**…), select it then click Open.
NOTE :
a) Use database from the same firmware version of your current ROM.
b) The database will locate at K8 Note Stock ROMs folder under diagnosis folder.
c) Under diagnosis folder extract modemdb zip to any place.
d) The required file is MDDB_InfoCustomAppSrcP_MT67**... Under manning_lwgdsd folder.
14) Now, enter the first 14 digits of the IMEI you wish to write. The digit entered in the CheckSum box will be the 15th digit of the IMEI.
15) Then click Download To Flash (If IMEI keeps disappearing after factory reset then try clicking Upload From Flash instead)
16) After successfully write iMei number for your device, you should see a message at the bottom saying Download IMEI to flash successfully.
17) Now click Disconnect button on Maui Meta and your device will switch off.
Done.
Tips: If your device can't Boot into Maui Meta mode, flash Stock ROM again with Format All + Download mode with SP Flash Tool. This error can happen if device was rooted or installed custom recovery.
So this is a guide for quick full stock installation which is fully compatible with your device
Warning:All of your data will be gone
REQUIREMENTS:A PC A MICRO SD CARD AND A WORKING DATA CABLE
Step One: Download and install Lenovo Moto Smart Assistant
Step 2: go under "Flash" option and then rescue and select the product you are using now choose the model and also select your hw code which i found under battery i dont know yours, and then wait for download.
Step 3:Enable usb debugging and then open cmd and use this command "adb reboot edl" without double quotation marks ofc
Step 4roceed and press ok to all of em
Additional process (follow steps with "a.") OTA installation (i will guide on windows)
a.1Open your explorer and then ur hard drive C: at the top you will see file etc. come to view which is 4th from left and then tick show hidden files (i am using windows Turkish so trying to translate)
a.2:Go ProgramData/LMSA/Download/CountryCodeFiles/a6020xxx____yyy/now choose the file with Country.ota.zip
a.3:Now you can sideload the file (go recovery and then select apply update from ADB)or you can copy it to your sd card and use "Apply update from Sd" using stock recovery and apply it.
AND CONGRATULATIONS! you are now on stock rom with all compatible drivers installed on your drive!
Also this is to everyone, a quick tip:if you cant reboot to download mode which you can do on cmd, you can go to fastboot mode first (Voldown+power)and then keep pressing on VolUp+VolDown+Power (keep doing until you see a whole black or a glowing screen)
Hello Everyone. The update is gradually getting live in all the regions. I just got it in India. Below is the link which I captured via Canary app.
Beta 1:
http://fota-secure-dn.ospserver.net/firmware/INS/SM-N986B/nspx/3d15912c7dec47678d26b7f03f722ebe.bin?px-time=61da7eb1&px-hash=d04c3cb435cad6937673908c12244c90&px-wid=6204308-WSA211110062027&px-wctime=2021-11-10%2006:20:27&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA==
Beta 1 Mirror: https://klisza1993.synology.me:1000.../J4ukGm08evreR1dYWbOQxngvuPTbTvJh-qb4gj3eTDgk
Beta 1 Mirror:
Note 20 Ultra One UI 4 Beta - Google Drive
drive.google.com
Checksum to verify corrupt downloads:
MD5 : 54db93183aa24ecdfaa7134891022094
Beta 2 Update: http://fota-secure-dn.ospserver.net/firmware/INS/SM-N986B/nspx/698c78dfebf8472d9e1691413b9af2f2.bin?px-time=61ed489c&px-hash=5f86741823355625dacb429abc4ff6cf&px-wid=3281729-WSA211124122250&px-wctime=2021-11-24 12:22:50&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA==
Prerequisite to flash beta on N20U (N986B) thanks to
dr.ketan
You need to be on November Security patch before moving ahead.
Dial *#1234#
If your info is ditto same as said below then only you can flash beta 1 for N986B
AP : N986BXXS3DUJ6
CSC : N986BOXM3DUH5
CP : N986BXXS3DUIF
Also if your device is rooted/modified, it will fail. (unlocked bootloader isn't issue but firmware must be complete stock)
TLDR instructions, thanks to pernodpepper
0. Create backup of your device (SmartSwitch)
1. Download .bin
2. Rename update.zip
3. Place file on SDCard
4. Go to recovery (No odin/download mode required)
5. Select Apply update from SDCard and choose update.zip
6. Profit
Detailed instructions along with multiple methods to install. Thanks to Evil_Smiley_za and @AhmedMomen
UPDATE:
-This thread will be for sharing tips and help and update.zip/.bin files (when/if available) for the OneUI 4.0 Android 12 Beta for the Galaxy Note 20 series (Unlocked/Exynos)
Installation Methods:
ADB-method:
1. Download SDK platform tools https://developer.android.com/studio/releases/platform-tools
2. Extract the file in your desktop.
3. Inside the extracted folder put the update.zip file
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown your phone and connect it to the pc
6. Holding Power and volume+ and enter into recovery mode.
7. Select "update via ADB". (scroll down using the volume buttons and select using the power button).
8. Connect the phone to a PC using an original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip
SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options on your pc you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Connect any USB device to your device, AKG earphones could work, then press Power and volume+ buttons to get into recovery mode.
5. Using your volume keys navigate to "update via sdcard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes installing. It will take some time.
8. Phone will reboot by itself and load android.
The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.
There are two methods that you can use to get into recovery mode
Method 1:
1. Connect your phone to your PC (Make sure USB debugging is on).
2. Using ADB, enter the command ./adb reboot recovery
3. Wait a little and you should be in recovery mode.
Method 2:
1. Power off your device
2. Connect your device to a PC or use the AKG earphones.
3. Hold down Power+VolumeUp buttons and keep pressing them until you enter recovery mode.
This will not trip knox if done by the methods above
Don't install a beta unless you are fully aware what you are going into.
Don't install the beta if you want your phone to be stable, IT'S a BETA.
It's recommended to make a backup of your data before updating to the Android 12 Beta.
Important Notes:
-Rename the .bin file to update.zip in order to be able to flash it from recovery.
-A common mistake done by some people is that they see the file named update while its a WinRAR.zip file already, then they add another .zip making the name of the file update.zip.zip which will not be flashed successfully, So make sure you do it right.
-Updating to the beta is AT YOUR RISK, No one is responsible if anything goes wrong.
You will not receive OTAs again UNTIL you are on a firmware that gets released later for your original CSC, thats most likely not happening before the BETA is over.
Note: AngryPixel89 is my reddit alias.
is it OXM?
antisocialbratt said:
Hello Everyone. The update is gradually getting live in all the regions. I just got it in India. Below is the link which I captured via Canary app. its a 2.5gb update. Use it at your own risk and please ask other senior members if you have doubts. I just followed instructions someone else shared to grab that link for you guys.
http://fota-secure-dn.ospserver.net/firmware/INS/SM-N986B/nspx/3d15912c7dec47678d26b7f03f722ebe.bin?px-time=61da7eb1&px-hash=d04c3cb435cad6937673908c12244c90&px-wid=6204308-WSA211110062027&px-wctime=2021-11-10%2006:20:27&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA==
OXM
Click to expand...
Click to collapse
Yes. It is INS OXM
antisocialbratt said:
Yes. It is INS OXM
Click to expand...
Click to collapse
Awesome
Can someone share the installation process please
Most probably you will have to flash it using Odin but I wouldn't guarantee that. Wait for some time till some modders here figure out a way.
waseem.gani said:
Can someone share the installation process please
Click to expand...
Click to collapse
First make sure you are on November patch
0. Create backup of your device (SmartSwitch)
1. Download .bin
2. Rename update.zip
3. Place file on SDCard
4. Go to recovery (No odin/download mode required)
5. Select Apply update from SDCard and choose update.zip
6. Profit
Maybe this help
Just rename it to update.zip and intall from recovery mode (i was in the latest build with november security patch)
works fine, thank you for the upload.
Do you have to be on October patch (DUIF) or November patch (DUJ6)?
Inxteros said:
Do you have to be on October patch (DUIF) or November patch (DUJ6)?
Click to expand...
Click to collapse
November
Does reguset full wipe or is not needed ?
My bad I was not able to flash it via recovery,any help would be appreciated. I am on October patch.
pernodpepper said:
0. Create backup of your device (SmartSwitch)
1. Download .bin
2. Rename update.zip
3. Place file in internal storage
4. Go to recovery (No odin/download mode required)
5. Flash update.zip
6. Profit
Click to expand...
Click to collapse
I can't see internl storge in the recovery
B.Gaboo said:
(i was in the latest build with november security patch)
You was on DUJ6/DUH5/DUIF?
Click to expand...
Click to collapse
N986BXXS3DUJ6
and installed from the external storage
waseem.gani said:
I can't see internl storge in the recovery
Click to expand...
Click to collapse
You need to use an sdcard and place the zip there
By any chance do you have Update.zip file for SM-G986B??
Rapier said:
You need to use an sdcard and place the zip there
Click to expand...
Click to collapse
Tried that as well, but don't know what the issue is
Amittey said:
By any chance do you have Update.zip file for SM-G986B??
Click to expand...
Click to collapse
This tread is for the SM-N986B. The note 20 Ultra only....
Hello everyone !! I am currently using the Pixel Experience ROM as my daily driver and I came across the task of updating the ROM without losing any of my data. The ROM has an updater in the settings and allows you to install OTA updates, but for me that has not worked. Whenever I try to install OTA updates and I reboot my updated phone, it gets stuck on the boot logo. I came across a solution to this which is to manually flash the updated GSI ROM without wiping any of your data beforehand. I decided to make a YouTube tutorial on how to do that. If you have any questions please din't hesitate to ask !! I'll be happy to help !!
Pre-requisites
- Unlocked bootloader
- TWRP Recovery
YouTube Step by Step Tutorial
Downloads
Pixel Experience Latest Version: https://github.com/ponces/treble_build_pe/releases
Platform Tools for Windows and Mac: https://mega.nz/folder/LXBkjKha#2zqvR2EXg5gfupPe-xEZJQ
How to Update Pixel Experience GSI ROM on Samsung S20 Series
1. Turn off your phone
2. Connect your phone to your computer via USB cable
3. Press both power + volume up buttons at the same time until you see the TWRP logo
4. Once you boot into TWRP, click on "Reboot" and then click on "Fastboot"
5. Go to your computer and download the platform tools folders that I left above
6. Go to the website linked above and download the latest version of Pixel Experience
7. Extract both the platform tools file and the pixel experience file
8. Open a new command window or terminal window on your computer
9. Go to the extracted platform tools folder and choose the "Platform Tools (Name of your OS) folder
10.Look for the "fastboot" file and drag it into a new terminal window
11. Leave a space and type the word "devices"
12. Hit enter
13. If you see a bunch of random numbers followed by the word "fastboot" your computer has recognized your phone
14. Go back to the "Platform Tools (Name of your OS)" folder and once again, drag the "fastboot" file into the terminal
15. Leave a space and type the words "erase system"
16. Hit enter
17. When the process is finished you should see the words "finished" and "total time" in the terminal
18. One last time, drag the "fastboot" file to the terminal
19. Leave a space and type "flash system"
20. Go to the pixel experience folder you previously downloaded and extracted from the website
21. Drag the "PixelExperience.....img" file over to the terminal window
22. Hit enter and wait for the file to be flashed (this might take a while)
When flashing is finished you will again see the message "finished" and "total time" in the terminal
23. Go back to your phone
24. Click on "Reboot"
25. Click on "System"
26. Wait for your phone to restart
You should now have the latest version of Pixel Experience without losing any of your data !!
ENJOY !!!
Hi there, I have a question. Is the 120 HZ working fine? Or do the display crops?