1) Download the "updateL22.zip" 1.7GB one from this link https://drive.google.com/drive/folders/1eNOfMInD-7mooOuG8FiK_Gk-Hc7ddOGE
2) Download and install this Honor Unpack tool from this link
https://forum.xda-developers.com/showthread.php?t=2433454
3) Close the app and reopen the tool again with Admin permissions.
4) After opening the tool, Goto settings and disable all options under the "Extract" section.
5) Extract the "UPDATE.APP" from the first downloaded zip file.
6)Now, open the Honor unpack tool and select the three dot menu "..." And choose the UPDATE.APP file which you have extracted earlier.
7) Now select SYSTEM.IMG from the list and Right Click on it > Extract file and then extract it to any directory you wish.
8) Reboot your Honor 7X to bootloader.
9) open CMD at the folder where you have extracted SYSTEM.IMG and type the command
Code:
fastboot flash system SYSTEM.IMG
10) Wait a few minutes until the process has finished.
11) After that, reboot to recovery and wipe data, cache and dalvik-cache and rebooot.
Rollback has been completed!
Hit that Thanks button if it helped you.
Requirements :
1) Maui Meta Tool : DOWNLOAD HERE
2) MediaTek USB Vcom Drivers : DOWNLOAD HERE
3) Windows 7 PC ( Recommend )
Instructions :
1) Download USB driver zip, extract it and install the drivers on your Pc. (Ignore if already installed)
2) Download Maui Meta tool and Unzip it using 7zip or any other extracting software.
3) Open Maui Meta application as administrator.
4) Wait till the application dashboard appears.
5) Under connection type, Choose Smartphone.
6) Click Reconnect button at the top.
7) Now Switch off your android phone and connect it with your PC via USB Cable then Power On.
8) When the circle color change to yellow, it means that your phone successfully detected and your device will stuck on Boot logo. ( Maui Meta mode ).
9) Now Click on the Get Target Version to confirm your phone.
10) Your phone details appear.
Come back to the main dashboard of Maui Meta.
11) Choose iMei Download option from the dropdown menu.
12) IMEI Download box should be open in new tab. Click on Change NVRAM Database File.
13) In the new tab window, choose the path of BPLGUInfo file (often named like BPLGUInfoCustomAppSrcP_MT67**…), select it then click Open.
NOTE :
a) Use database from the same firmware version of your current ROM.
b) The database will locate at K8 Note Stock ROMs folder under diagnosis folder.
c) Under diagnosis folder extract modemdb zip to any place.
d) The required file is MDDB_InfoCustomAppSrcP_MT67**... Under manning_lwgdsd folder.
14) Now, enter the first 14 digits of the IMEI you wish to write. The digit entered in the CheckSum box will be the 15th digit of the IMEI.
15) Then click Download To Flash (If IMEI keeps disappearing after factory reset then try clicking Upload From Flash instead)
16) After successfully write iMei number for your device, you should see a message at the bottom saying Download IMEI to flash successfully.
17) Now click Disconnect button on Maui Meta and your device will switch off.
Done.
Tips: If your device can't Boot into Maui Meta mode, flash Stock ROM again with Format All + Download mode with SP Flash Tool. This error can happen if device was rooted or installed custom recovery.
Hi mates, today i come with the unique guide for unbrick our Huanor GR5X phones
THIS GUIDE IS FOR FULLY BRICKED HUAWEI GR5/5X HONOR, ALL MODEL/VARIANT
ATENTION!!!
Files rawprogram0.xml and patch0.xml from my packcage its ONLY for the Huawei GR5 KII-L23 16GB VARIANT!!!
In order to continue with the tutorial, you must create your rawprogram and patch0 xml files
(mini tutorial bellow)
Ready? GO
1) Download my packcage (link MEGA)
2) Install QFIL Software. From my packcage, extract and move the folder 'Firmware' to C:\Program Files\Qualcomm\QPST\bin
3) Download and extract this .IMG files from ANY 5.1 full firmware UPDATE.APP for your model/variant
(Note: for KII-L23 is not necessary GPT.img)
GPT.img
BOOT.img
CUST.img
SYSTEM.img
TZ.img
MODEM.img
Place all img files in C:\Program Files\Qualcomm\QPST\bin\Firmware
4) Install Qualcomm drivers, Connect phone to pc, open Device Manager. If you see under com port Qualcomm USB loader or something along those lines. your good.
5) In QFIL software, if qualcomm driver are found it will say on top of QFIL software Qualcom USB loader 9008 (if say 9006,900E, you must put your phone into EDL mode with EDL Cable or EDL TEST POINT, google it)
6) Once you get the Qualcom USB loader 9008 on QFIL, you can continue
6) Select Build Type: click Flat Build
7) Select Programmer: browse to C:\Program Files\Qualcomm\QPST\bin\Firmware\prog_emmc_firehose_8939.mbn and select
8) Load XML: browse to C:\Program Files\Qualcomm\QPST\bin\Firmware and select "rawprogram0.xml" file, then select "patch0.xml" file.
9) Go to Tools and click Partition Manager
10) You will see a list with all files from partition table
11) To flash, you need select Boot.img in the list first, a mini windows will open, click on Load image and select the Boot.img placed on C:\Program Files\Qualcomm\QPST\bin\Firmware
Do the same with the rest of img files in THIS order
BOOT.img
CUST.img
SYSTEM.img
TZ.img
MODEM.img
12) Once you finish, close the partition manager. A message will appear and phone will reboot. If not, reboot manually
That's all enjoy!
FOR GR5 KII-L2X AND HONOR 5X KIW-L2X MODEL/VARIANT, FOLLOW THIS TUTORIAL
1) Download my packcage and exctract it
2) Open a cmd windows in 'Phyton + GPT Tools' folder
3) Type: GPTAnalyzer.py (drag and drop the GPT.img file previously downloaded from 5.1 firmware) and click Enter
4) Copy all results in cmd, paste on notepad and save as 'Partition0.xml' (start with <?xml version... and finish on </configuration>)
5) Type GPTParseTool.py -x (drag and drop the partition0.xml created) and click enter
6) Go to phyton folder and move all created files to C:\Program Files\Qualcomm\QPST\bin\Firmware
7) Now you can continue with the guide
Thats all my friends, hope you get a new life for your Huanor GR5X
PLEASE IF I HELP YOU, BUY ME A COFFE HERE
Reserved
GOOD guide！someone will need it！
my question：does it work on the locked phone?
wsdyleon said:
GOOD guide！someone will need it！
my question：does it work on the locked phone?
Click to expand...
Click to collapse
Thanks!
Locked and unlocked devices.
My dear friend, there is no python tools folder in your package. i can't unbrick my phone with your xml files, its a KLL-L21.
Best of regards.
faabricjs said:
Thanks!
Locked and unlocked devices.
Click to expand...
Click to collapse
I cant find python + GPT tools
faabricjs said:
Thanks!
Locked and unlocked devices.
Click to expand...
Click to collapse
my device is not showing up I have removed the battery and connected the usb but nothing happens only the device vibrates and huawei logo apears but nothing on my pc
Ibrahim Tariq said:
I cant find python + GPT tools
Click to expand...
Click to collapse
Here you will find all files needed and instructions
You have to open the phone and put it in EDL mode
Search Google for that
https://forum.hovatek.com/thread-31505.html
snazzyman89 said:
My dear friend, there is no python tools folder in your package. i can't unbrick my phone with your xml files, its a KLL-L21.
Best of regards.
Click to expand...
Click to collapse
Ibrahim Tariq said:
my device is not showing up I have removed the battery and connected the usb but nothing happens only the device vibrates and huawei logo apears but nothing on my pc
Click to expand...
Click to collapse
See my reply in previous post #8
---------- Post added at 02:15 AM ---------- Previous post was at 02:06 AM ----------
Can't we use Huiye Download Tool to flash all the images ?
what if i dont have system.img in my firmeware ? what should i do ? i have firehose from b321 can this be compatible with b330?
EDIT : i found the sys.img for b321
friends help me out i have KiW L21 superbricked unable to charge battery and he dont show up in device manager as qloader 9008
So this is a guide for quick full stock installation which is fully compatible with your device
Warning:All of your data will be gone
REQUIREMENTS:A PC A MICRO SD CARD AND A WORKING DATA CABLE
Step One: Download and install Lenovo Moto Smart Assistant
Step 2: go under "Flash" option and then rescue and select the product you are using now choose the model and also select your hw code which i found under battery i dont know yours, and then wait for download.
Step 3:Enable usb debugging and then open cmd and use this command "adb reboot edl" without double quotation marks ofc
Step 4roceed and press ok to all of em
Additional process (follow steps with "a.") OTA installation (i will guide on windows)
a.1Open your explorer and then ur hard drive C: at the top you will see file etc. come to view which is 4th from left and then tick show hidden files (i am using windows Turkish so trying to translate)
a.2:Go ProgramData/LMSA/Download/CountryCodeFiles/a6020xxx____yyy/now choose the file with Country.ota.zip
a.3:Now you can sideload the file (go recovery and then select apply update from ADB)or you can copy it to your sd card and use "Apply update from Sd" using stock recovery and apply it.
AND CONGRATULATIONS! you are now on stock rom with all compatible drivers installed on your drive!
Also this is to everyone, a quick tip:if you cant reboot to download mode which you can do on cmd, you can go to fastboot mode first (Voldown+power)and then keep pressing on VolUp+VolDown+Power (keep doing until you see a whole black or a glowing screen)
Custom Rom Xperia Z3CTW SGP611 Build 23.5.A.1.291_1290-4947_R2D By Mux
if you have questions or need files just PM me on XDA and i will try to help where i can...
the reason i made this tut is because there is almost no roms for this device available...
(not Responsible for any damages to device or peripherals through the process since there is always a chance something happens **but i had my device in almost every state and with the tools mentioned u should be able to revive it ** )
Included in this ROM (for you to build)
- Passes Saftynet
- Rooted with Magisk 20.4 (magisk hide working)
- Custom Kernel For Booting System and TWRP (made with rootkernel_v4.51_Windows_Linux.zip)
- Sony Ric Disabled / Enabled Depends on Rootkernel Config
- Netflix working
- Kernel can be set to Permissive via Terminal command.
- TWRP 3.0.2 (from Rootkernel_4.5.1)
- Remoteplay only works with Ric enabled and magisk uninstalled (make 2 boot.img for swapping in twrp)(due to sony device)
Apps i sugest u dl on ur rooted device
- FX File explorer
- Terminal for Android
- Netflix
- Vanced Manager
- Busybox (if needed)
IMPORTANT!! This Tutorial Ignores TA Partition So if you want to save them google How to Backup TA for SGP611 Before Following this Tutorial (some functionality can be regained through DRM opt in RootKernel
A Tutorial to Reproduce (*Do not Worry the Harder You Try The easier it gets)
1. Install Drivers for Fastboot and ADB in Device Manager for your device
- Boot Device to Fastboot by pressing Vol+ while Pluging USB Cable to PC Blue led indicates Fastboot Mode
- Go to Device Manager and Install Driver for S1boot
- Verify Driver installed Correctly
2. Install Flashtool Xperifirm, Flashtool Emma from Sony, Xperia Companion, copy Platform-tools folder to C:
(if u need any files PM)
3. Unlock Your Bootloader following instruction on Sony Developer Website (not going in to Details) *read warning above
before this
4. Download FTF firmware file With Flashtool Xperifirm For Your Device in My Case SGP611_23.5.A.1.291_1290-4947_R2D
By selecting XF Button in Flashtool after Closing xperifirm Flashtool will convert the files and they will be stored to
%user%\.flashTool\firmwares
5. Extract Kernel.sin Using 7zip or winrar from SGP611_23.5.A.1.291_1290-4947_R2D.ftf for patching boot.img
6. Open Flashtool and go to Tools menu select Sin Editor search and select the Kernel.sin Previously Extracted and press Extract
Data this will Create Kernel.elf
7. Go to RootKernelv4.51 Folder and copy the Kernel.elf there open CMD in address bar to folder and enter the command
(rootkernel kernel.elf boot.img) Select the option u like by Pressing y I selected all Options because I don’t have TA Backup
this will create a file Boot.img which is your Custom Boot Image if you want Recovery make Shure to say y when asked about
TWRP
8. Open PRFcreator and select all options click on the … for ftf and load the SGP611_23.5.A.1.291_1290-4947_R2D.ftf file
downloaded in step 3 click on the … for SuperSU and select the Magisk_20.4.zip set all check marks and create Flashable Zip
Zip is found in PRFcreator folder (this is your stock firmware zip)
9. Copy all files listed into a folder on your Internal storage
- Flashable-prerooted-signed.zip (created with PRFcreator)
- Moded Boot.img (Created with Rootkernelv4.51)
- Disable_ric_file.zip (if not moded in Boot.img)
- Magisk_20.4.zip (for Flashing Magisk After Flashing Boot.img)
10. Boot Phone in to Fastboot mode, Run CMD in address bar of Platform-tools folder, and Flash twrp 2.8.7.0 (yes will be
updated after Flashing Boot.img) by entering this command in ( Fastboot flash boot twrp-2.8.7.0-scorpion_windy.img )(**this
flashed to boot because u dont have recovery befor flashing the moded boot.img and this will be changed back by flashing
the stock ftf downloaded**)
if successful Unplug and boot tab it should boot to Teamwin TWRP recovery
11. In TWRP go to WIPE, Advanced Wipe, (Wipe: Cache, Dalvik-Cache, and System,)
before Flashing the Firmware Files
12. On main screen TWRP go to INSTALL and Install files following order
- Flashable-prerooted-signed.zip
- Moded Boot.img (by selecting flash image button at the bottom in TWRP)
- Disable_ric_file.zip
- Magisk_20.4.zip
13. Reboot to System Buy yourself a beer and Enjoy
where are the files ?