Lg stylo 2 plus says lgup cant load the model[C:\Program files - LG Stylo 2 Plus Questions & Answers

Lg stylo 2 plus says lgup cant load the model[C:\Program Files(x86)\LG Electronics\LGUP\model\com
Been like this for days cant seem to fix it
Cant seem to flash using lg flash tool 2014 either
i need help can someone send me an email to [email protected]
Really want my root off i have my .kdz file to flash and all drivers installed just this model thingy is stopping me
Phone version LGMS550. LG STYLO 2 PLUS
ANY HELP IS APPRECIATED

Demonessence said:
Lg stylo 2 plus says lgup cant load the model[C:\Program Files(x86)\LG Electronics\LGUP\model\com
Been like this for days cant seem to fix it
Cant seem to flash using lg flash tool 2014 either
i need help can someone send me an email to [email protected]
Really want my root off i have my .kdz file to flash and all drivers installed just this model thingy is stopping me
Phone version LGMS550. LG STYLO 2 PLUS
ANY HELP IS APPRECIATED
Click to expand...
Click to collapse
Use upper cut

Related

[Q] [REQ] DLL for flashing D805 10B TOT file through LG Flash Tool 1.6 - Please help

Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Read this carefully may help you
http://forum.xda-developers.com/showthread.php?t=2477595
Yeah, that was the guide I used when I landed on fastboot after a bad flash from CleanROM... I flashed some boot.img and recovery.img that didnt work out well.
After I flashed these I rebooted and fastboot mode was no longer loading, instead, I am now on bootloop of the LG logo, with no animation, just the first logo that shows on boot, and I can access stock recovery to factory wipe and also access download mode. My download mode shows rooted warning, and while I am flashing a KDZ, does not show the firmware version I currently have in the middle of the box - before I flashed those .IMGs, it did show the version.
I now a, after a .DLL for D805 10A .TOT file, and I cannot find it. I think the flash method from LGFlashTools 1.6 will work, with .DLL and .TOT files, where the LGFlashTools 1.0.5 did not work for me, with .KDZ.
Or if anyone knows of a way to get into the fastboot mode for G2, pelase let me know. Then I could reflash some .IMG files and hopefully get my phone back online...
Try to flash other version even this is 802 or internetional version. At least you can proof your phone completly brick or not.
I only have all TOT file link of F320 and D802 if you need to try.
Sent from my LG-F320L using xda app-developers app
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
KriegerBread said:
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Click to expand...
Click to collapse
Andrew-droid said:
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Click to expand...
Click to collapse
Andrew-droid said:
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
Click to expand...
Click to collapse
Hi Guys, I know this is a very very late answer but maybe it can help someone!
DarkSyrius said:
Hi guys, I know this is not the right spot to ask it, but it more visited than other.
I already installed this ROM and Worked all fine, but when I'm trying to install some Magisk Modules and rebooted my device it get stuck at LG logo... I can access Download mode but not my TWRp recovery.
Any solution to my problem? Just a little help...
Thank you so much anyway!
Click to expand...
Click to collapse
Thanks to all that tried to help me! I appreciate it a lot! Thank you so much!
My only solution was to try short the capacitors following this thread:
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Thanks God I don't need to mess with the board!
My problem was that I tried this ROM LineageOS 17.1 with latest version of TWRP Blastgator. Everything was running fine until I flashed Magisk and installed some Mods, then the device rebooted and I get stuck at logo!
No System and no Recovery access, only Download mode! :crying:
Then I followed this thread:
https://forum.xda-developers.com/showthread.php?t=2432476
I used to install some custom ROMs like Cloudy G2, LineageOS, Resurretion Remix and AOSPX Pie and tried to this new one. I never had any problems!
This time I realized that my device was forever bricked, my last hope was to short the capacitors but I tried all ways to back to Stock because in Downlaod Mode my device was recognized by Windows.
I tried this in Windows 10 x64 but no success, then I formatted an old HD with Windows 7 x64 to try again!
Old Flash Tool get me stuck at 2% or 4%... no success in both system with all LG drivers available... NO SUCCESS!
https://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
LGUp only gives Unknow Device and never start but it's seens the device on port 41 - that I changed following the tutorial.
My last hope was New Flash Tool but I needed TOT file for my Device - D805 not D802 and the correct DLL. initially I didn't find anywhere... Like this guy:
https://forum.xda-developers.com/showthread.php?t=2583851
I give a lot of tries... a lot of different files, DLLs, tried .KDZ and .DZ, only errors and errors... a lot of "Failed to Load()"...
I'm getting frustrated until I see this thread:
https://forum.xda-developers.com/showthread.php?t=2582142
And found this mine of gold of Downloads:
http://downloads.codefi.re/autoprime/LG/LG_G2/
And again, thanks to all, there is a hope in the D805 folder!
I get the TOT File: BIN_LGD805AT-00-V10a-724-05-AUG-23-2013-16G.zip and tried the LG Firmware Extractor (https://forum.xda-developers.com/showthread.php?t=2600575) to get a new DLL (LGUP8974.dll).
And voilà, like a charm that WORKED!!!!!!!!! :fingers-crossed::highfive:
It installed Jelly Bean the with the Official LG Updater I installed Kitkat and finally Lollipop.
Later I'll try this LineageOS Rom again!
I hope I can help someone in need like me!!
I thank this forum a lot!!
And please excuse my English!
Thank you so much!

G2 f320 4.4.2 TOT

Hi guys
I know its a long shot to expect a reply on here with a Korean G2 but......
Does anyone know where i can download the 4.4.2 firmware (TOT file) and dll for the G2 F320K ?
I've just managed to update the phone to 4.4 using the TOT method and root it with iroot but ive just seen there's a 4.4.2 update but i cant find the TOT file for it anywhere
Thanks ;(
Anyone ??
I've not had one reply on here to any of my threads
Bulldog666 said:
Anyone ??
I've not had one reply on here to any of my threads
Click to expand...
Click to collapse
hello , why u want TOT file ? u can download .kdz file and its available in many websites
android_for_all said:
hello , why u want TOT file ? u can download .kdz file and its available in many websites
Click to expand...
Click to collapse
Thanks for the reply (its the first one I've had on this forum)
I've found a few 4.4.2 kdz files but every method I've tried to use to flash them either results in them getting stuck at 49% (47% on the computer) or a softbrick.
The only way I managed to go from 4.2.2 to 4.4 was by using the TOT method.
I just cant find a tot file for my f320k
Bulldog666 said:
Thanks for the reply (its the first one I've had on this forum)
I've found a few 4.4.2 kdz files but every method I've tried to use to flash them either results in them getting stuck at 49% (47% on the computer) or a softbrick.
The only way I managed to go from 4.2.2 to 4.4 was by using the TOT method.
I just cant find a tot file for my f320k
Click to expand...
Click to collapse
hey
last week ive returned my lg g2 to stock firmware using a .kdz file without any issues .so r u sure that u did all the steps correctly? u should check these threads http://www.droidviews.com/how-to-restore-lg-g2-to-stock-firmware/
http://theunlockr.com/2013/11/01/unroot-lg-g2-versions-video/
just do them step by step
ps i prefer the unlockr thread its simpler than the first one
android_for_all said:
hey
last week ive returned my lg g2 to stock firmware using a .kdz file without any issues .so r u sure that u did all the steps correctly? u should check these threads http://www.droidviews.com/how-to-restore-lg-g2-to-stock-firmware/
http://theunlockr.com/2013/11/01/unroot-lg-g2-versions-video/
just do them step by step
ps i prefer the unlockr thread its simpler than the first one
Click to expand...
Click to collapse
Thanks again for the reply
I've tried those methods an it gets as far as loading the support tool and everything look like its working with the % going up, but then it gets stuck at 49%.
I've looked on some forums and this seems to be a common problem but I've tried all the solutions posted and none of them work.
The only way I'm then able to bring the phone back to life I'd by using the TOT method.
I'm even having trouble installing a recovery as they all seem to boot me into a black screen
I just tried it again and it seems that when it gets stuck at 49% it give this error:
Indirect Internal / PC to Phone send start
FIXED
For anyone else having this problem then just use these settings instead:
in RD test tool, choose: CDMA instead of 3GQCT
CS emergency instead of diag
then click on CSE web upgrade test instead of normal web upgrade test.
That should stop you getting stuck at 49%.

Help. I f.....! Up LG vs 425pp.. Verizon

I was messing around in the etc file of my phone and now I have no sound. Can someone save me and send me a download of the stock etc file from and LG Optimus zone 3. LG vs425pp.... Please!
judthro said:
stock etc file from and LG Optimus zone 3. LG vs425pp.... Please!
Click to expand...
Click to collapse
What's the exact file path that you need?
[email protected] said:
What's the exact file path that you need?
Click to expand...
Click to collapse
i got it. thanks though
I broke my optimus 3 and i need the stock firmware
i rooted my optimus 3 and then went and deleted the LG Activation tool. This now causes the the phone to stay in a boot loop with Security Error shown. Do you have a link to the optimus 3 stock rom I can use to try and reflash using one of the many lg mobile tools i have?
Dude, can you shoot me some links to those firmware?
Im stuck in a bootloop with a google play error and a LGsetup error
judthro said:
I was messing around in the etc file of my phone and now I have no sound. Can someone save me and send me a download of the stock etc file from and LG Optimus zone 3. LG vs425pp.... Please!
Click to expand...
Click to collapse
I need this firmware as well
Found it. Well, for those who aren't in a boot loop. Its as easy as plugging the phone into the computer and using the installed windows software to reinstall or update through your computer......Cheers.
chasechuckie said:
Found it. Well, for those who aren't in a boot loop. Its as easy as plugging the phone into the computer and using the installed windows software to reinstall or update through your computer......Cheers.
Click to expand...
Click to collapse
could you guys upload the tools and software for the pc that came on the phone to megasync please thanks
Lg zone3
johhnyapplefake said:
i rooted my optimus 3 and then went and deleted the LG Activation tool. This now causes the the phone to stay in a boot loop with Security Error shown. Do you have a link to the optimus 3 stock rom I can use to try and reflash using one of the many lg mobile tools i have?
Click to expand...
Click to collapse
Can you help me to root my LG Optimus Zone 3?
HOw enable diag mode?
someone who can help me I have some LG optimus optimism zone 3verizon someone. Can you help me how to unlock them?

Soft brick

I soft bricked the phone and now can only get into download mode. The phone only has two partitions and I was hoping that flashing a KDZ would fix this.
I'm running Linux Mint on my machine and using SALT an LG type open source program in order to flash.
Question: I heard that I should flash something before the Dec 2017 security patch. I can't find any KDZ files unfortunately and was hoping someone here would have a server I could pull it from.
onedeathbyflame said:
I soft bricked the phone and now can only get into download mode. The phone only has two partitions and I was hoping that flashing a KDZ would fix this.
I'm running Linux Mint on my machine and using SALT an LG type open source program in order to flash.
Question: I heard that I should flash something before the Dec 2017 security patch. I can't find any KDZ files unfortunately and was hoping someone here would have a server I could pull it from.
Click to expand...
Click to collapse
dear atleast mention model number , variant of lg v20.
anyhow, https://lg-firmwares.com/ , here you can find kdz of all lg models
hahmad78 said:
dear atleast mention model number , variant of lg v20.
anyhow, https://lg-firmwares.com/ , here you can find kdz of all lg models
Click to expand...
Click to collapse
Oh goodness I'm so terribly sorry I seem to have over looked it.
It's an LGV20 H910
What happened is that I used a ROM that was for another model and it kept crashing. After some time I started tinkering with some other software before I realized that even though I bought the device as a 996 I got the 910 version from the eBay seller.
In any case I remember someone mentioning that if I'm going to flash a stock kernel I should stick to something that was before the DEC 2017 security patch so that I can keep the exploit that enables ROM flashing.
Not sure if that's referring to the bootloader that I'll have to flash or the stock ROM itself.
Oh and lastly I remember someone mentioning that the KDZ for my variant of V20 doesn't have any stock images so I'll have to take one from another model flash it to boot then root it and flash a custom bootloader and then re-flash a custom ROM.
That's probably not how it's suppose to work but it's roughly what I remember.
onedeathbyflame said:
Oh and lastly I remember someone mentioning that the KDZ for my variant of V20 doesn't have any stock images so I'll have to take one from another model flash it to boot then root it and flash a custom bootloader and then re-flash a custom ROM.
That's probably not how it's suppose to work but it's roughly what I remember.
Click to expand...
Click to collapse
dear what is the condition of your mobile now? does lg up detect the mobile? if so than use LG UP patched version and try to flash your stock kdz.
hahmad78 said:
dear what is the condition of your mobile now? does lg up detect the mobile? if so than use LG UP patched version and try to flash your stock kdz.
Click to expand...
Click to collapse
Sorry darling that it took so long to reply!
My phone is detected by SALT (the open source program developed by steadfasterX) BUT it is doesn't want to work with LGup on a windows system because I don't have the proper .dll to work with my model type.
The LGup log file says
"LGUP can't load the model."
funny enough though the log file shows the model type right after a hex key string.
It says "LG-US996.. US99610d..."
I can get the phone into download mode but the phone doesn't have any partitions right now. So for now it's a paper weight.
onedeathbyflame said:
Sorry darling that it took so long to reply!
My phone is detected by SALT (the open source program developed by steadfasterX) BUT it is doesn't want to work with LGup on a windows system because I don't have the proper .dll to work with my model type.
The LGup log file says
"LGUP can't load the model."
funny enough though the log file shows the model type right after a hex key string.
It says "LG-US996.. US99610d..."
I can get the phone into download mode but the phone doesn't have any partitions right now. So for now it's a paper weight.
Click to expand...
Click to collapse
every kdz has dll file, even lg up has dll file. you can extract kdz and get dll for your specific model.
use lg up patched version, search on xda, it will solve your problem.
i can not help on linux and SALT, as i dont have these. if you have access to windows machine, than i can try to sort problem for you.

Can someone give me a link to the LG UP version that works for US997?

Regular unlocked US997, not the US Cellular version.
I've tried a few times to get this to work, I can never get LG UP to actually start up, it always fails.
I have my .kdz file ready. LG Bridge is useless, tells me 20c is the latest version.. Can't take an OTA either because it always fails.
Thanks!
Edit: No need to look around for the dll file, just need to use Uppercut
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295/

Categories

Resources