Database Users

LG E615 | Cross Firmware Flashing/Downgrading | Error 1002 | 4% Update Fail FIX

This post may be helpful for:​
1. People that are trying to downgrade from firmware they flashed.
2. People who accidentally flashed wrong firmware and now they want to flash the correct one.
3. People who generally want to flash a firmware using the KDZ Updater, ​
AND
Cannot do the things above because the KDZ Update tool shows the "Error 1002" or the update tool stops at 4%.
P.S. I have tried that on Optimus L5 and L9 when I had same problem and it works. Some users also told me it works on L7 too.
Go to post 2 for the solution​
Hello guys.
As the title says, I have tried to test JB(e610 model) Firmware to my LGE 615 with KDZ Updater.
The funny part is that I tried Europe v20B, which is supported for e610 and it (SEEMED) to be installed correctly. It wasn't obviously, that's why I'm here..! I had the usual " no touch " issue. The touch works ONLY after the first KDZ install, and after Hard Factory Reset for only ONE boot(and with SIM inside - If it's not it doesnt work). With the first reboot, the touch stops working.
Hence, I decided to downgrade it again to the previous version. So, I downloaded the correct firmware from LG site.
The issue is that NO other version other than v20B(Europe) for LG e610 is installed (no matter how many Roms compatible with e615 i tried).
I tried recovery from The LG Mobile Support Tool auto-update,KDZ Updater and offline installing it (Unbrick). The first 2 options give me this specific error:
Smart : wParam = 100, lParam = 1002
Step : Upgrade Error error code = 1002
Click to expand...
Click to collapse
The latter, gives me error in Connection with the phone(which I think is a bug)
The wierd thing is that v20B Europe flashing works. It seems i cannot "downgrade" it to an other version.
I thought "maybe it's because I tried e610 firmware" so I downloaded and tried older e610 firmwares but still nothing works. ONLY v20B-e610.
Of course I tried everything with disabled the LGE Usb Modem driver and with usb-debugging on.
Any suggestions?
Thanks in advance,
Moul.
EDIT: I've searched every possible solution online(Currently I'm trying to figure if LG Flashtool can do anything. Found the LG_E615.dll, but currently it says it cannot find the libusb0.dll....
Can anyone help? Maybe a link/guide for Flashtool?
EDIT 2: Ok, now I'm totally frustrated(and SCARED)... Stayed up all night and found NO solution. Tried LGMDP too, but cannot find a workaround...I tried either in Emergency Download Mode or in JB with no solution.... Is there any device compatible with e615 that i can use from LGMDP's devices??? KDZ still gives me the "1002" Error(Except of V20 Firmware).........
Am I at the wrong forum btw?*
If anyone knows any solution or has any abso-freaking-lutely ideas what I can do(Because I mine have ended).... PLEASE HELP!! :crying:
Please help..!!!!
Click to expand...
Click to collapse

KDZ Updater - Error 1002
Finally fixed it!!!
I installed downgraded CrossModel Firmware, and now my E615 has a E615 Official Rom.
As I said on the first post, there was only one firmware that worked and got installed with the KDZ Updater tool.(The v20b-for E610 - Europe) , so I downloaded the firmware i wanted to install, and "tricked" the PC into, thinking that it installed the 20b.
I don't know if that issue happened only to me only, but IF someone has the same problem another time, it will maybe work for him too. Or maybe it will be possible solution to everyone flashing a wrong Firmware..!
The thing is , I noticed that the KDZ Updater everytime it wanted to install a KDZ, it extracted it as a .DZ file at the "LGMOBILEAX" folder located in C/ProgramData folder.(In Windows XP it's in C:\Documents and Settings\<your account name>\Application Data\)
To fix the "Lparam 1002 Error"(Stop on 4% of update tool or crash error in KDZ updater ) I did the following steps:
1. Installed correct drivers from LG mobile tool to be sure my phone was recognized.
2. Moved battery out(Optional, by I prefer it if it's possible).
3. Entered Emergency Download Mode(By pressing the Volume-Down button while connecting the phone with the PC).
4. Extracted the -working-E610/V20.kdz and the E615/ V10.kdz with the Rom Converter Tool made by jes0411 (Original Post HERE), and renamed the extracted E615v10.dz same as E610v20.dz.
5. I started the KDZ update, choosing the working V20, and when the e610v20.dz file was extracted, I replaced it immediately with the (now renamed as "e610v20.dz") E6150v10.dz.
EDIT: If you are too scared of replacing files during the procedure, just wait until the update stops and ask you to restart. You can replace then it then.
Wierd issue from LG, but it worked for me!
Cheers.

Hello Guys...
I can CONFIRM that the process explained by moulwxtos works!!!!:good:
Just to add that in my case the first time I made the process the device stayed at the LG logo,, tried a hard reset without results, so I choose another ICS working KDZ file and made a second flash.... A succesfuly second one!!.
Thank you moulwxtos... your help was so appreciated..
My device: LG e612f

MeGaViC said:
Hello Guys...
I can CONFIRM that the process explained by moulwxtos works!!!!:good:
Just to add that in my case the first time I made the process the device stayed at the LG logo,, tried a hard reset without results, so I choose another ICS working KDZ file and made a second flash.... A succesfuly second one!!.
Thank you moulwxtos... your help was so appreciated..
My device: LG e612f
Click to expand...
Click to collapse
I was awake, sitting on this issue for 35 hours trying to figure out how it can be solved. At least it helped someone else other than me too! Glad to be helpful!
Cheers

I was thinking "I won´t be able to try other roms anymore" but with your solution, I WILL!!!, hehehe...
35 hours awake?... problems like this takes sleep away...
Thank you again sir...
Regards..

man i have lg e610 ..i upgraded to stupid jelly bean rom which hwave many bugs ..i wnated to downgrade back to the stock rom so i downloaded it from the lg website and when i try to flash it using kdz it keep telling me wparam 1000 lparam 1002 error and closes :S i hate my mobile now and want to return to the stock rom can you help me ?

hassan216 said:
man i have lg e610 ..i upgraded to stupid jelly bean rom which hwave many bugs ..i wnated to downgrade back to the stock rom so i downloaded it from the lg website and when i try to flash it using kdz it keep telling me wparam 1000 lparam 1002 error and closes :S i hate my mobile now and want to return to the stock rom can you help me ?
Click to expand...
Click to collapse
You upgraded via KDZ Updater? Or by the in-phone updater?
If you upgraded via KDZ, you follow the same steps as the second post. The .dz files that you will need to replace are in the c://appdata/lgmobileax folder (on Windows 7 and with "show hidden files and folders" option ON).
If you didn't update via the LG KDZ tool , you just have to find a working (one that can get installed) firmware from HERE. I think it's better to download a Jelly Bean(V20) one, since you wont have problem installing it propably.
Try, the things above, follow the steps on second post carefully and tell me what happened.
Cheers,
Moul.

i have updated through kdz and i do the same steps as i updated but it gives me errors ..i will try the way you mentioned in post two ...its too complicated when i read it i didnt understand anything but i will try and tell you if i need assistance ..thank you mate

I can confirm that it works on lg l5 e610.
I succesfully flashed from v20c to v10l.

Brilliant!!
This worked for me!!
I tot my Ph was almost Bricked.. was searching for a solution but did not get it anywhere...
Finally this fixed the issue..
Thanks Mate..
Thanks a million..

Thx a lot! Worked like a charm! :good:

i flash e612 with rom of P705, now the phone bricked. want to flash back. try to use this mothod, need to replace the "dll" file too?

i did it finally.
my phone is E612 , flased into L7 P705 wrongly. finally flashed back into E612 by using this.
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.

moulwxtos said:
I was awake, sitting on this issue for 35 hours trying to figure out how it can be solved. At least it helped someone else other than me too! Glad to be helpful!
Cheers
Click to expand...
Click to collapse
Hey guys,
Please help me out. I have an E615 that I wrongly flashed with with an E610 ROM using the KDZ Updater. I'm trying to use your process to get it back to the stock ROM but i have a problem, whenever I try to copy the renamed E615 file after extraction I get the message that the file is still in use and cannot be replaced. How do i work around this? Please help, I'm pretty desperate here

quiorra25 said:
Hey guys,
Please help me out. I have an E615 that I wrongly flashed with with an E610 ROM using the KDZ Updater. I'm trying to use your process to get it back to the stock ROM but i have a problem, whenever I try to copy the renamed E615 file after extraction I get the message that the file is still in use and cannot be replaced. How do i work around this? Please help, I'm pretty desperate here
Click to expand...
Click to collapse
Did you try the workarounds below?
moulwxtos said:
EDIT: If you are too scared of replacing files during the procedure, just wait until the update stops and ask you to restart. You can replace it then.
Click to expand...
Click to collapse
ilovelg4ever said:
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
Click to expand...
Click to collapse

moulwxtos said:
Did you try the workarounds below?
Click to expand...
Click to collapse
Hey moulwxtos,
I managed to figure it out. The problem was with the version of KDZ updater I was using. For some reason I couldn't replace the renamed .dz file when using the original KDZ Updater because it kept giving me something about permission errors. When i changed to the KDZ Updater with offline fox (UpTestEX_mod2_marwin) it worked flawlessly. My phone's back to normal. Many thanks mate

ilovelg4ever said:
i did it finally.
my phone is E612 , flased into L7 P705 wrongly. finally flashed back into E612 by using this.
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
Click to expand...
Click to collapse
please some video how to replace the generated file of UpTestEX_mod2_marwin,
because i cant it say file in use or i cant cancel the generated, and even unplugin the cable, impossible

Right Now at 2017. We can fix the "Error 1002" or the update tool stops at 4%. of th
Right Now at 2017.
We can fix the "Error 1002" or the update tool stops at 4%. of the KDZ Update tool (I did with LG E615)
This way:
1. Installed correct drivers from LG mobile tool to be sure my phone was recognized.
2. Moved battery out(Optional, by I prefer it if it's possible).
3. Entered Emergency Download Mode(By pressing the Volume-Down button while connecting the phone with the PC).
4. Download a firmware stock version V10x_00 compatibly with your Phone ( From lg-firmwares)
5. With LG Flash Tool 2004 do downgrade from V20 to version Base V10, you just have to choose the V10x_00.kdz
6. I started the KDZ update NORMALLY and just Wait.
maybe later you can install the version V20D

[Q] G2 d800 with d802 rom/firmware bad flash

I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.

iredline5 said:
I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.
Click to expand...
Click to collapse
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash

bullghost said:
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash
Click to expand...
Click to collapse
Tried that, but it fails due to firmware and phone being different. thanks for the help

same problem need help
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:

kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app

x714x said:
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way

kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
then you will need ADB to boot into recovery

ssreynolds said:
then you will need ADB to boot into recovery
Click to expand...
Click to collapse
Going give this a try again. But the issue is if my pc has enough time to sync with the phone before the phone reboots.

I've tried something along those lines but to no avail. My phone doesn't show up on my computer in its current status. How can I get map to recognize my phone I have the drives installed and lg upgrade tool can see it so I know it can kinda see it. When I ran Adb devices nothing comes up on the ASB command prompt

kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom

bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
don't think that's going to work for my situation but I'll give it a try in a bit. So I would get a d800 rom and load d802 .dll? I think once the program sees the .dll file and the firmware, it will fail.

bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out

kenpachiramasam said:
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out
Click to expand...
Click to collapse
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.

iredline5 said:
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.
Click to expand...
Click to collapse
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere

kenpachiramasam said:
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere
Click to expand...
Click to collapse
Tried it with the d802 dll file and d800. Still fails for me.
Here is the d802.dll
https://www.dropbox.com/s/77isqnkeuixkj6u/LGD802_20130912_LGFLASHv160.dll

well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now

kenpachiramasam said:
well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now
Click to expand...
Click to collapse
i think we need some one to hack the dll or the LGFlashTools to skip TOT checking

Ya if we could get someone to do that then I could get everything to go through. Unfortunately I don't know any one with much programming or coding skills. But thanks for the help so far man. It's nice to know not everyone on the Internet is an asshole

kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
if you can stay longger in fastboot mode
try flash VZ laf.img
fastboot erase laf
fastboot flash laf laf.img
here how to and tool for fastboot
http://forum.xda-developers.com/showthread.php?t=2477595
i think this partition also the responsible for phone type ex D802 or VZ980 where LGFlashTools use it to detect phone type
laf partition will bring download mode to you

Hahaha tried this one to and the one it links me too. My phone isn't reconized my my computer so doing things throught the PCs CMD is out of the question for me and so is pushing the boot .img via ADB since my phone wasn't In debugging mode when I bricked it. But again thanks man. I think I've exhausted most of the conventional fix it threads on this since I've been looking through everything since Sunday

[Q] LG optimus l3 E430 wont boot.. HELP NEEDED

Recently(today) i rooted my phone with framaroot 1.9.1. i installed rom toolbox and the started to change fonts. i applied one font and then i rebooted my phone.but now its not booting up.ias i saw that it wont boot up i pulled out battery and rebooted.it loads lg boot logo and animation but it wont load homescreen.it loads endlessly.
i also tried to wipe data by buttons but when i get the recovery mode loading,it immediately reboots.also i know very little about unbricking android phone by pc.IF YOU CAN HELP ME I AM VERY GRATEFULL(hope thats how they write it)

mariopoldoja said:
Recently(today) i rooted my phone with framaroot 1.9.1. i installed rom toolbox and the started to change fonts. i applied one font and then i rebooted my phone.but now its not booting up.ias i saw that it wont boot up i pulled out battery and rebooted.it loads lg boot logo and animation but it wont load homescreen.it loads endlessly.
i also tried to wipe data by buttons but when i get the recovery mode loading,it immediately reboots.also i know very little about unbricking android phone by pc.IF YOU CAN HELP ME I AM VERY GRATEFULL(hope thats how they write it)
Click to expand...
Click to collapse
Your phone is soft-bricked. Take a look here: http://forum.xda-developers.com/showthread.php?t=2582881

fkn font and bootanimations
mariopoldoja said:
Recently(today) i rooted my phone with framaroot 1.9.1. i installed rom toolbox and the started to change fonts. i applied one font and then i rebooted my phone.but now its not booting up.ias i saw that it wont boot up i pulled out battery and rebooted.it loads lg boot logo and animation but it wont load homescreen.it loads endlessly.
i also tried to wipe data by buttons but when i get the recovery mode loading,it immediately reboots.also i know very little about unbricking android phone by pc.IF YOU CAN HELP ME I AM VERY GRATEFULL(hope thats how they write it)
Click to expand...
Click to collapse
what he said !
and stay away from fonts and bootanimations in rom toolbox (alltogether preferably) awesome app but last screen causes more damage than anything else

IGGYVIP said:
what he said !
and stay away from fonts and bootanimations in rom toolbox (alltogether preferably) awesome app but last screen causes more damage than anything else
Click to expand...
Click to collapse
MY LG MODEL IS LG OPTIMUS L3 II E430
ROM IS STOCK ROM i havent flash it

mariopoldoja said:
MY LG MODEL IS LG OPTIMUS L3 II E430
ROM IS STOCK ROM i havent flash it
Click to expand...
Click to collapse
You can use the L3 unbrick solution with your L3 II and these L3 II roms: http://lg-phone-firmware.com/index.php?id_mod=22

can i use odin to unbrick my phone?of so what do i need?rom or systemfiles?
anyway thank you for helping

mariopoldoja said:
can i use odin to unbrick my phone?of so what do i need?rom or systemfiles?
anyway thank you for helping
Click to expand...
Click to collapse
Odin is only for samsung. For LG, use KDZ updater. You must download rom too. (Links in my previously posts) Not so difficult.
Roms for L3 II (look for your country): http://lg-phone-firmware.com/index.php?id_mod=22
How to: http://forum.xda-developers.com/show....php?t=2582881

Thanks.cant thank you enough.:victory:

the link u posted-are there roms or systemfiles?
where do i get kdz for pc?

sorry about that. i got all i need but cant find usb driver on the lg website. where i can download the usb driver from lg website?
thanks

mariopoldoja said:
the link u posted-are there roms or systemfiles?
where do i get kdz for pc?
Click to expand...
Click to collapse
The link he posted is stock kdz for different countries.
Look for your country and your phone model and download the latest firmware.

mariopoldoja said:
sorry about that. i got all i need but cant find usb driver on the lg website. where i can download the usb driver from lg website?
thanks
Click to expand...
Click to collapse
Here:http://www.mediafire.com/?56ub0cf73thfhtb

thank you very much.
thats all i need i guess.

mariopoldoja said:
thank you very much.
thats all i need i guess.
Click to expand...
Click to collapse
No problem!
one more link in case of:http://www.lg.com/uk/support/software-manuals

kdz updater needs to run as administrator but when i right click it theres not a way to run it as administrator

mariopoldoja said:
kdz updater needs to run as administrator but when i right click it theres not a way to run it as administrator
Click to expand...
Click to collapse
Right click, properties, compatibility and check "run this program as administrator".

do i need to compress that .rar(kdz updater) into something else?
im runnin on windows 8 there is attributes but wheres compability?

mariopoldoja said:
do i need to compress that .rar(kdz updater) into something else?
im runnin on windows 8 there is attributes but wheres compability?
Click to expand...
Click to collapse
Just unpack your kdz_updater package with winrar in a folder where you want to use it. I don't see anything about incompatibility with win8.

one problem remains
i press volume + and - and power button but doesnt go emergency mode

now i finished it.
i succesfully unbricked my lg thanks to kind people who knew how to do it.
i WILL drop you thanks.

[Q] How to trick LG FlashTool into thinking I have a different LG G2?

I have a sprint LG G2, LG flashtool thinks its a T-mobile LG G2. It previosuly had a mixed rom of sprint+T-mobile (to use it as a GSM device). Is there a way to manually change my model in LG flashtool so it accepts the sprint .dll and .TOT

Anyone? I flashed the T-Mobile stock .TOT and now the phone is very unstable. It keeps rebooting every couple minutes and will not turn off

jumpman6235 said:
I have a sprint LG G2, LG flashtool thinks its a T-mobile LG G2. It previosuly had a mixed rom of sprint+T-mobile (to use it as a GSM device). Is there a way to manually change my model in LG flashtool so it accepts the sprint .dll and .TOT
Click to expand...
Click to collapse
you can try editing build.prop in pc with notepad++ to say it's model is ls980 and then try and see if you can flash?

XxZombiePikachu said:
you can try editing build.prop in pc with notepad++ to say it's model is ls980 and then try and see if you can flash?
Click to expand...
Click to collapse
I cant. The phone is too unstable. Every time I try to root it, it will reboot.
Is there a way to modify the Sprint .tot and .dll to make it trick LG flashtool into thinking its the t-mobile version?

jumpman6235 said:
I cant. The phone is too unstable. Every time I try to root it, it will reboot.
Is there a way to modify the Sprint .tot and .dll to make it trick LG flashtool into thinking its the t-mobile version?
Click to expand...
Click to collapse
Well you can try this dll which is supposed to ignore model check
Sent from LG-G2 D800 on AEONFLEX 4.4.2

XxZombiePikachu said:
Well you can try this dll which is supposed to ignore model check
Sent from LG-G2 D800 on AEONFLEX 4.4.2
Click to expand...
Click to collapse
Just tried using that dll you provided in combo with the sprint .tot im getting this error message:
Error: [13:6:2] CrossDL [D801] to [LS980]. SWversion 00000064
Click to expand...
Click to collapse
the phone may be borked for good?

XxZombiePikachu said:
you can try editing build.prop in pc with notepad++ to say it's model is ls980 and then try and see if you can flash?
Click to expand...
Click to collapse
I GOT IT!!! I kept trying and finally was able root and pull build.prop with ADB. I found a sprint LG G2 build.prop here on XDA, I pushed that one on the phone and then went into download mode and flashed sprint .tot and .dll with LG Flashtool. Thanks man!!!!

jumpman6235 said:
Just tried using that dll you provided in combo with the sprint .tot im getting this error message:
the phone may be borked for good?
Click to expand...
Click to collapse
I can help you. I need original dll for your phone. i made some changrs and you flash your g2 with tot method. Read my post on 4PDA. I am from Ukraine. Sorry for my english.
if you still need the help - write in private message.

"Dead" Android software

Hello
I have Lg P710 II phone rooted. Yesterday I deleted probably settings.apk. I knew that I have to be aware when I'm using rooted Android, but it happend.
I can't enter into settings, I was trying to do factory reset but I'm stuck at the "Unfortunately, settings has stopped". I managed to download Odin and flash my phone, but I can't even run my phone in download mode.
I hope you can handle this issue.

Depr2 said:
Hello
I have Lg P710 II phone rooted. Yesterday I deleted probably settings.apk. I knew that I have to be aware when I'm using rooted Android, but it happend.
I can't enter into settings, I was trying to do factory reset but I'm stuck at the "Unfortunately, settings has stopped". I managed to download Odin and flash my phone, but I can't even run my phone in download mode.
I hope you can handle this issue.
Click to expand...
Click to collapse
Dude, if you want to reinstall the LG L7 II software, you need to download the KDZ updater and ROM stock in .kdz format. I have no idea where to find the ROM Stock for LG L7 II, but I pass you the link of the L7 II forum.
http://forum.xda-developers.com/optimus-l3-l5-l7-l9-ii

Thanks you very much , I was newbie and I thought that "Odin" is universal.
I have successfully flashed phone using KDZ updater, now I have a clean KitKat.

Depr2 said:
Thanks you very much , I was newbie and I thought that "Odin" is universal.
I have successfully flashed phone using KDZ updater, now I have a clean KitKat.
Click to expand...
Click to collapse
good that I could help you! at first, I also thought that Odin was universal. at the time, I wanted to update my L5 anyway.