Related
This post may be helpful for:
1. People that are trying to downgrade from firmware they flashed.
2. People who accidentally flashed wrong firmware and now they want to flash the correct one.
3. People who generally want to flash a firmware using the KDZ Updater,
AND
Cannot do the things above because the KDZ Update tool shows the "Error 1002" or the update tool stops at 4%.
P.S. I have tried that on Optimus L5 and L9 when I had same problem and it works. Some users also told me it works on L7 too.
Go to post 2 for the solution
Hello guys.
As the title says, I have tried to test JB(e610 model) Firmware to my LGE 615 with KDZ Updater.
The funny part is that I tried Europe v20B, which is supported for e610 and it (SEEMED) to be installed correctly. It wasn't obviously, that's why I'm here..! I had the usual " no touch " issue. The touch works ONLY after the first KDZ install, and after Hard Factory Reset for only ONE boot(and with SIM inside - If it's not it doesnt work). With the first reboot, the touch stops working.
Hence, I decided to downgrade it again to the previous version. So, I downloaded the correct firmware from LG site.
The issue is that NO other version other than v20B(Europe) for LG e610 is installed (no matter how many Roms compatible with e615 i tried).
I tried recovery from The LG Mobile Support Tool auto-update,KDZ Updater and offline installing it (Unbrick). The first 2 options give me this specific error:
Smart : wParam = 100, lParam = 1002
Step : Upgrade Error error code = 1002
Click to expand...
Click to collapse
The latter, gives me error in Connection with the phone(which I think is a bug)
The wierd thing is that v20B Europe flashing works. It seems i cannot "downgrade" it to an other version.
I thought "maybe it's because I tried e610 firmware" so I downloaded and tried older e610 firmwares but still nothing works. ONLY v20B-e610.
Of course I tried everything with disabled the LGE Usb Modem driver and with usb-debugging on.
Any suggestions?
Thanks in advance,
Moul.
EDIT: I've searched every possible solution online(Currently I'm trying to figure if LG Flashtool can do anything. Found the LG_E615.dll, but currently it says it cannot find the libusb0.dll....
Can anyone help? Maybe a link/guide for Flashtool?
EDIT 2: Ok, now I'm totally frustrated(and SCARED)... Stayed up all night and found NO solution. Tried LGMDP too, but cannot find a workaround...I tried either in Emergency Download Mode or in JB with no solution.... Is there any device compatible with e615 that i can use from LGMDP's devices??? KDZ still gives me the "1002" Error(Except of V20 Firmware).........
Am I at the wrong forum btw?*
If anyone knows any solution or has any abso-freaking-lutely ideas what I can do(Because I mine have ended).... PLEASE HELP!! :crying:
Please help..!!!!
Click to expand...
Click to collapse
KDZ Updater - Error 1002
Finally fixed it!!!
I installed downgraded CrossModel Firmware, and now my E615 has a E615 Official Rom.
As I said on the first post, there was only one firmware that worked and got installed with the KDZ Updater tool.(The v20b-for E610 - Europe) , so I downloaded the firmware i wanted to install, and "tricked" the PC into, thinking that it installed the 20b.
I don't know if that issue happened only to me only, but IF someone has the same problem another time, it will maybe work for him too. Or maybe it will be possible solution to everyone flashing a wrong Firmware..!
The thing is , I noticed that the KDZ Updater everytime it wanted to install a KDZ, it extracted it as a .DZ file at the "LGMOBILEAX" folder located in C/ProgramData folder.(In Windows XP it's in C:\Documents and Settings\<your account name>\Application Data\)
To fix the "Lparam 1002 Error"(Stop on 4% of update tool or crash error in KDZ updater ) I did the following steps:
1. Installed correct drivers from LG mobile tool to be sure my phone was recognized.
2. Moved battery out(Optional, by I prefer it if it's possible).
3. Entered Emergency Download Mode(By pressing the Volume-Down button while connecting the phone with the PC).
4. Extracted the -working-E610/V20.kdz and the E615/ V10.kdz with the Rom Converter Tool made by jes0411 (Original Post HERE), and renamed the extracted E615v10.dz same as E610v20.dz.
5. I started the KDZ update, choosing the working V20, and when the e610v20.dz file was extracted, I replaced it immediately with the (now renamed as "e610v20.dz") E6150v10.dz.
EDIT: If you are too scared of replacing files during the procedure, just wait until the update stops and ask you to restart. You can replace then it then.
Wierd issue from LG, but it worked for me!
Cheers.
Hello Guys...
I can CONFIRM that the process explained by moulwxtos works!!!!:good:
Just to add that in my case the first time I made the process the device stayed at the LG logo,, tried a hard reset without results, so I choose another ICS working KDZ file and made a second flash.... A succesfuly second one!!.
Thank you moulwxtos... your help was so appreciated..
My device: LG e612f
MeGaViC said:
Hello Guys...
I can CONFIRM that the process explained by moulwxtos works!!!!:good:
Just to add that in my case the first time I made the process the device stayed at the LG logo,, tried a hard reset without results, so I choose another ICS working KDZ file and made a second flash.... A succesfuly second one!!.
Thank you moulwxtos... your help was so appreciated..
My device: LG e612f
Click to expand...
Click to collapse
I was awake, sitting on this issue for 35 hours trying to figure out how it can be solved. At least it helped someone else other than me too! Glad to be helpful!
Cheers
I was thinking "I won´t be able to try other roms anymore" but with your solution, I WILL!!!, hehehe...
35 hours awake?... problems like this takes sleep away...
Thank you again sir...
Regards..
man i have lg e610 ..i upgraded to stupid jelly bean rom which hwave many bugs ..i wnated to downgrade back to the stock rom so i downloaded it from the lg website and when i try to flash it using kdz it keep telling me wparam 1000 lparam 1002 error and closes :S i hate my mobile now and want to return to the stock rom can you help me ?
hassan216 said:
man i have lg e610 ..i upgraded to stupid jelly bean rom which hwave many bugs ..i wnated to downgrade back to the stock rom so i downloaded it from the lg website and when i try to flash it using kdz it keep telling me wparam 1000 lparam 1002 error and closes :S i hate my mobile now and want to return to the stock rom can you help me ?
Click to expand...
Click to collapse
You upgraded via KDZ Updater? Or by the in-phone updater?
If you upgraded via KDZ, you follow the same steps as the second post. The .dz files that you will need to replace are in the c://appdata/lgmobileax folder (on Windows 7 and with "show hidden files and folders" option ON).
If you didn't update via the LG KDZ tool , you just have to find a working (one that can get installed) firmware from HERE. I think it's better to download a Jelly Bean(V20) one, since you wont have problem installing it propably.
Try, the things above, follow the steps on second post carefully and tell me what happened.
Cheers,
Moul.
i have updated through kdz and i do the same steps as i updated but it gives me errors ..i will try the way you mentioned in post two ...its too complicated when i read it i didnt understand anything but i will try and tell you if i need assistance ..thank you mate
I can confirm that it works on lg l5 e610.
I succesfully flashed from v20c to v10l.
Brilliant!!
This worked for me!!
I tot my Ph was almost Bricked.. was searching for a solution but did not get it anywhere...
Finally this fixed the issue..
Thanks Mate..
Thanks a million..
Thx a lot! Worked like a charm! :good:
i flash e612 with rom of P705, now the phone bricked. want to flash back. try to use this mothod, need to replace the "dll" file too?
i did it finally.
my phone is E612 , flased into L7 P705 wrongly. finally flashed back into E612 by using this.
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
moulwxtos said:
I was awake, sitting on this issue for 35 hours trying to figure out how it can be solved. At least it helped someone else other than me too! Glad to be helpful!
Cheers
Click to expand...
Click to collapse
Hey guys,
Please help me out. I have an E615 that I wrongly flashed with with an E610 ROM using the KDZ Updater. I'm trying to use your process to get it back to the stock ROM but i have a problem, whenever I try to copy the renamed E615 file after extraction I get the message that the file is still in use and cannot be replaced. How do i work around this? Please help, I'm pretty desperate here
quiorra25 said:
Hey guys,
Please help me out. I have an E615 that I wrongly flashed with with an E610 ROM using the KDZ Updater. I'm trying to use your process to get it back to the stock ROM but i have a problem, whenever I try to copy the renamed E615 file after extraction I get the message that the file is still in use and cannot be replaced. How do i work around this? Please help, I'm pretty desperate here
Click to expand...
Click to collapse
Did you try the workarounds below?
moulwxtos said:
EDIT: If you are too scared of replacing files during the procedure, just wait until the update stops and ask you to restart. You can replace it then.
Click to expand...
Click to collapse
ilovelg4ever said:
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
Click to expand...
Click to collapse
moulwxtos said:
Did you try the workarounds below?
Click to expand...
Click to collapse
Hey moulwxtos,
I managed to figure it out. The problem was with the version of KDZ updater I was using. For some reason I couldn't replace the renamed .dz file when using the original KDZ Updater because it kept giving me something about permission errors. When i changed to the KDZ Updater with offline fox (UpTestEX_mod2_marwin) it worked flawlessly. My phone's back to normal. Many thanks mate
ilovelg4ever said:
i did it finally.
my phone is E612 , flased into L7 P705 wrongly. finally flashed back into E612 by using this.
How to stop the process when flashing P705: when dz generated , unplug the usb cable, & replace the DZ of E612 with same name of DZ of P705.
thanks a lot.
Click to expand...
Click to collapse
please some video how to replace the generated file of UpTestEX_mod2_marwin,
because i cant it say file in use or i cant cancel the generated, and even unplugin the cable, impossible
Right Now at 2017. We can fix the "Error 1002" or the update tool stops at 4%. of th
Right Now at 2017.
We can fix the "Error 1002" or the update tool stops at 4%. of the KDZ Update tool (I did with LG E615)
This way:
1. Installed correct drivers from LG mobile tool to be sure my phone was recognized.
2. Moved battery out(Optional, by I prefer it if it's possible).
3. Entered Emergency Download Mode(By pressing the Volume-Down button while connecting the phone with the PC).
4. Download a firmware stock version V10x_00 compatibly with your Phone ( From lg-firmwares)
5. With LG Flash Tool 2004 do downgrade from V20 to version Base V10, you just have to choose the V10x_00.kdz
6. I started the KDZ update NORMALLY and just Wait.
maybe later you can install the version V20D
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Read this carefully may help you
http://forum.xda-developers.com/showthread.php?t=2477595
Yeah, that was the guide I used when I landed on fastboot after a bad flash from CleanROM... I flashed some boot.img and recovery.img that didnt work out well.
After I flashed these I rebooted and fastboot mode was no longer loading, instead, I am now on bootloop of the LG logo, with no animation, just the first logo that shows on boot, and I can access stock recovery to factory wipe and also access download mode. My download mode shows rooted warning, and while I am flashing a KDZ, does not show the firmware version I currently have in the middle of the box - before I flashed those .IMGs, it did show the version.
I now a, after a .DLL for D805 10A .TOT file, and I cannot find it. I think the flash method from LGFlashTools 1.6 will work, with .DLL and .TOT files, where the LGFlashTools 1.0.5 did not work for me, with .KDZ.
Or if anyone knows of a way to get into the fastboot mode for G2, pelase let me know. Then I could reflash some .IMG files and hopefully get my phone back online...
Try to flash other version even this is 802 or internetional version. At least you can proof your phone completly brick or not.
I only have all TOT file link of F320 and D802 if you need to try.
Sent from my LG-F320L using xda app-developers app
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
KriegerBread said:
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Click to expand...
Click to collapse
Andrew-droid said:
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Click to expand...
Click to collapse
Andrew-droid said:
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
Click to expand...
Click to collapse
Hi Guys, I know this is a very very late answer but maybe it can help someone!
DarkSyrius said:
Hi guys, I know this is not the right spot to ask it, but it more visited than other.
I already installed this ROM and Worked all fine, but when I'm trying to install some Magisk Modules and rebooted my device it get stuck at LG logo... I can access Download mode but not my TWRp recovery.
Any solution to my problem? Just a little help...
Thank you so much anyway!
Click to expand...
Click to collapse
Thanks to all that tried to help me! I appreciate it a lot! Thank you so much!
My only solution was to try short the capacitors following this thread:
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Thanks God I don't need to mess with the board!
My problem was that I tried this ROM LineageOS 17.1 with latest version of TWRP Blastgator. Everything was running fine until I flashed Magisk and installed some Mods, then the device rebooted and I get stuck at logo!
No System and no Recovery access, only Download mode! :crying:
Then I followed this thread:
https://forum.xda-developers.com/showthread.php?t=2432476
I used to install some custom ROMs like Cloudy G2, LineageOS, Resurretion Remix and AOSPX Pie and tried to this new one. I never had any problems!
This time I realized that my device was forever bricked, my last hope was to short the capacitors but I tried all ways to back to Stock because in Downlaod Mode my device was recognized by Windows.
I tried this in Windows 10 x64 but no success, then I formatted an old HD with Windows 7 x64 to try again!
Old Flash Tool get me stuck at 2% or 4%... no success in both system with all LG drivers available... NO SUCCESS!
https://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
LGUp only gives Unknow Device and never start but it's seens the device on port 41 - that I changed following the tutorial.
My last hope was New Flash Tool but I needed TOT file for my Device - D805 not D802 and the correct DLL. initially I didn't find anywhere... Like this guy:
https://forum.xda-developers.com/showthread.php?t=2583851
I give a lot of tries... a lot of different files, DLLs, tried .KDZ and .DZ, only errors and errors... a lot of "Failed to Load()"...
I'm getting frustrated until I see this thread:
https://forum.xda-developers.com/showthread.php?t=2582142
And found this mine of gold of Downloads:
http://downloads.codefi.re/autoprime/LG/LG_G2/
And again, thanks to all, there is a hope in the D805 folder!
I get the TOT File: BIN_LGD805AT-00-V10a-724-05-AUG-23-2013-16G.zip and tried the LG Firmware Extractor (https://forum.xda-developers.com/showthread.php?t=2600575) to get a new DLL (LGUP8974.dll).
And voilà, like a charm that WORKED!!!!!!!!! :fingers-crossed::highfive:
It installed Jelly Bean the with the Official LG Updater I installed Kitkat and finally Lollipop.
Later I'll try this LineageOS Rom again!
I hope I can help someone in need like me!!
I thank this forum a lot!!
And please excuse my English!
Thank you so much!
I tried almost every way i saw on the forums, i have a d802 rom on my ls980 when I go to lg flash stock it fails and says cannot cross install d802 to ls980. Ive seen some with the same problem, if anyone has a solution please Help,I used optimus 1 click tool and it factory reset my phone but it was still on the same rom and now I cant even get into download mode.
Sent from my MB855 using xda app-developers app
I have optimus G pro 2 build, no recovery mode, the touch screen is off so it's difficult for me to maneuver around the phone, I can get it into USB debugging mode, I'm not sure if the factory reset remove the root or not. when I hold all three buttons volume up volume down and power key it goes into this mode asking me if I want to use the volume keys to answer the phone. as I think of the rest of the problems I will post them. thanks in advance
Sent from my MB855 using xda app-developers app
Ok so I was able to get back into download mode, I tried to flash back to stock and this is what I keep getting
Sent from my MB855 using xda app-developers app
Not sure but try this http://www.lg-phones.org/how-to-flash-unbrick-lg-g2-back-to-stock.html
What is your g2 model number
If your g2 is ls980 and lg flash tool think it is d802 try flash with d802 tot file first
note . You must use dll from kdz firmware
Extract dll from kdz using kdz extractor
Dll name must name as LGUP_XXXX
Flash with d802 tot
After you g2 will force to fastboot mode
That fastboot we need
If u are on fastboot
eras your recovery and flash your original laf.img using fastboot (You can find this tut by google suck as lg g2 fastboot)
that will make your download mode came back and now u can flash with your ls980 tot firmware without error
Sent from my LG-D802 using xda app-developers app
Please give this to me for dummies, im a noob, I need plain instructions so simple A baby could understand, and thanks for reply
Sent from my MB855 using xda app-developers app
Pdoubleo315 said:
Please give this to me for dummies, im a noob, I need plain instructions so simple A baby could understand, and thanks for reply
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Did you have a custom recovery installed (like TWRP)?
i too need help with this. what I really need to know is if I flash the ls980zv7 .tot will I be able to then update OTA to get to ls980zv8 then to the latest ls980ZVA?
Abu Nazir said:
i too need help with this. what I really need to know is if I flash the ls980zv7 .tot will I be able to then update OTA to get to ls980zv8 then to the latest ls980ZVA?
Click to expand...
Click to collapse
I've never tried that with ls980, but I've done it with my vs980 a bunch of times. Should work the same for ls980.
stillwaiting255 said:
I've never tried that with ls980, but I've done it with my vs980 a bunch of times. Should work the same for ls980.
Click to expand...
Click to collapse
ok thanks for the reply. I just got my g2 2 days ago wasn't paying attention and pulled a dummy move and formatted data instead of formatting system and erased everything off the phone. erased my nandroid, efs, etc. I still have twrp but since my efs partions are gone my thinking was I should just go back to stock. I could side load but I really wanted to figure this out so if I ever have a warrenty issue I will know how to get the phone back to out of box stock. I got the phone brand new with LS980ZVA on it. any suggestions? should I side load? what about efs? also I don't mean to hijack this thread. thanks for any help in advance
Abu Nazir said:
ok thanks for the reply. I just got my g2 2 days ago wasn't paying attention and pulled a dummy move and formatted data instead of formatting system and erased everything off the phone. erased my nandroid, efs, etc. I still have twrp but since my efs partions are gone my thinking was I should just go back to stock. I could side load but I really wanted to figure this out so if I ever have a warrenty issue I will know how to get the phone back to out of box stock. I got the phone brand new with LS980ZVA on it. any suggestions? should I side load? what about efs? also I don't mean to hijack this thread. thanks for any help in advance
Click to expand...
Click to collapse
I've done the exact same thing that you did and I found it was easier to revert back to stock but I guess it depends on how familar you are with the process of doing so. It's definately worth learning as well. Plenty of good forums on how to do it.
stillwaiting255 said:
I've done the exact same thing that you did and I found it was easier to revert back to stock but I guess it depends on how familar you are with the process of doing so. It's definately worth learning as well. Plenty of good forums on how to do it.
Click to expand...
Click to collapse
ok I appreciate the advice, but all I can find is a LS980ZV7.tot. not a LS980ZV8.tot or a LS980ZVA.tot. ive been researching this literally for hours and hours now. my brain hurts. what I really want to know is if I do the LS980ZV7.tot, go that route, will I be able to get back to LS980ZVA (latest update) thru OTA update? also how do I know the .tot file I have is the 32g and not the 16g? that's making me nervous. ive read where quite a few people have done this and thought they were using the 32g version or whatever and they flashed and then their phone was only 16g and lost the 16g of storage. idk man. im coming from a lg optimus g and the development over there on that phone and procedures and all of that is way more easier to understand and cut and dry. over here on the sprint g2 as far as trying to find clear answers, its just not as easy I guess. maybe im not looking in the right places.
Abu Nazir said:
ok I appreciate the advice, but all I can find is a LS980ZV7.tot. not a LS980ZV8.tot or a LS980ZVA.tot. ive been researching this literally for hours and hours now. my brain hurts. what I really want to know is if I do the LS980ZV7.tot, go that route, will I be able to get back to LS980ZVA (latest update) thru OTA update? also how do I know the .tot file I have is the 32g and not the 16g? that's making me nervous. ive read where quite a few people have done this and thought they were using the 32g version or whatever and they flashed and then their phone was only 16g and lost the 16g of storage. idk man. im coming from a lg optimus g and the development over there on that phone and procedures and all of that is way more easier to understand and cut and dry. over here on the sprint g2 as far as trying to find clear answers, its just not as easy I guess. maybe im not looking in the right places.
Click to expand...
Click to collapse
I usually use this one:
http://forum.xda-developers.com/showthread.php?t=2432476
He talks about the different versions.
well went ahead and went for it and all is ggod. phone is working great and im going to try and update here in a few mins. thanks for all of yur help. I think I might try and do a way more noob friendly tut for people like me that just aren't sure exactly what is being told to them. lol. something to think about anyway. thanks again!!
updating to LS980ZV8 as I type. super stoked. the link u posted @stillwaiting255 is the post I had been reading over and over again all day long. lol. so just for anyone interested once u go back to ZV7 stock u can then update OTA to ZV8 then ZVA.
I don't have twrp or any custom recovery :banghead: why wont mines fixxxxx
Sent from my MB855 using xda app-developers app
maxkanick said:
What is your g2 model number
If your g2 is ls980 and lg flash tool think it is d802 try flash with d802 tot file first
note . You must use dll from kdz firmware
Extract dll from kdz using kdz extractor
Dll name must name as LGUP_XXXX
Flash with d802 tot
After you g2 will force to fastboot mode
That fastboot we need
If u are on fastboot
eras your recovery and flash your original laf.img using fastboot (You can find this tut by google suck as lg g2 fastboot)
that will make your download mode came back and now u can flash with your ls980 tot firmware without error
Sent from my LG-D802 using xda app-developers app
Click to expand...
Click to collapse
How do i erase my recovery?
maxkanick said:
What is your g2 model number
If your g2 is ls980 and lg flash tool think it is d802 try flash with d802 tot file first
note . You must use dll from kdz firmware
Extract dll from kdz using kdz extractor
Dll name must name as LGUP_XXXX
Flash with d802 tot
After you g2 will force to fastboot mode
That fastboot we need
If u are on fastboot
eras your recovery and flash your original laf.img using fastboot (You can find this tut by google suck as lg g2 fastboot)
that will make your download mode came back and now u can flash with your ls980 tot firmware without error
Sent from my LG-D802 using xda app-developers app
Click to expand...
Click to collapse
Pdoubleo315 said:
How do i erase my recovery?
Click to expand...
Click to collapse
also will you please give me a detailed easy to follow tut on this
First you must be on fastboot mode
If you get in to fastboot mode than go here
http://forum.xda-developers.com/showthread.php?t=2477595
to get g2 on fastboot mode u need to flash worng firmware on it
If you g2 is LS980 and lg flash tool think it is d801
Try flash d801 tot on it
Note ! you must use dll from d801 kdz firmware format
for do that you can use kdz extractor
dll from kdz will named as LGUP_XXXX
Flash it with d801 tot using lg flash tool
You can find kdz extrackor here
http://forum.xda-developers.com/showthread.php?t=2600575
After you have flash laf.img you get your download mode back and
you can flash
Using your LS980 tot firmware
Sent from my LG-D802 using xda app-developers app
here is a stock ZV8 http:slahslashdownloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware (Thank, autoprime), I know ZVA is floating around, just search and you should find it.
Also just a little piece of info I picked up along the way, I used the correct .dll (LGLS980_20130904_LGFLASHv151) and renamed it to the reported models .dll (LGUP_8974), after doing this LGFlash Tool then ran the update, as normal. best of luck!
I have LG g2 d802 16 gb
UK 3 h3g variant...
My Display Panel type is Jdi
Issue is White Horizontal Lines
On some wallpapers
And certain graphics
&
Some videos
Tried Cloudy Patched Jdi kernel
After flashing this kernel display
Was acting weird
Like old vintage TV
Hardly Recovered from
Dead screen..
Screen wasn't waking up once I switched off the screen
Once I thought
My phone is dead
Or Bricked
But some how I've managed to restore
And I've tried panel swap zip
&
Whatever I could search on xda & google
Nothing is working for me
Guys please help me,,
I don't wanna sale this phone
Cause I love this phone
Guys please help me
kafeel said:
Guys please help me
Click to expand...
Click to collapse
When you said you restored, what exactly did you do? The best way to troubleshoot software issues is to flash stock firmware back with the kdz method. If it's a software problem that should fix it.
I've flashed kdz firmware
But issue is
These lines appears occasionally
As I mentioned
kafeel said:
I've flashed kdz firmware
But issue is
These lines appears occasionally
As I mentioned
Click to expand...
Click to collapse
Flash TOT & dll file by LG flash tool. Don't install autorec! I'm waiting your update!
But my phone doesn't need tot or dll file I gues
kafeel said:
But my phone doesn't need tot or dll file I gues
Click to expand...
Click to collapse
go to http://downloads.codefi.re/autoprime/LG/LG_G2/D802/Stock_Firmware and download BIN_LGD802AT-00-V10b-EUR-XX-SEP-07-2013-16G.zip, LGD802_20130912_LGFLASHv160.dll.zip. then set up lg flash tool, and search forum how to flash TOT, dll file. your phone data will be lost
Which kdz file should I flash along with this tot and dll files
And wil it solve issue are you sure
kafeel said:
Which kdz file should I flash along with this tot and dll files
And wil it solve issue are you sure
Click to expand...
Click to collapse
I don't know. try to flash TOT by LG flash tool. go to http://forum.xda-developers.com/showthread.php?t=2663369 and read careful. Flash TOT , your phone data will be deleted. KDZ, your data will be not deleted
Anyone please
Hello
I have LG G2 32GB from HK
First I Rooted the device, everything was OK- phone works...
Than I decided to burn STOCK ROM , i used LG Flash Tool 2014
Flash was 100% success, no error
After Device finish boot,
In the first Welcome screen (where you choose language)
I cannot touch the screen, everywhere i click (touch) the screen it seems like i touch somewhere else....
I cannot proceed forward from the welcome screen
The phone does not respond to my touch.... broken
The phone goes into Download mode, and quite strange- though i flah unrooted Stock Rom - it still writes that the phone is rooted.....
I tried to flash 5 different ROM (kdz file), None of them helped...same problem for each KDZ
I tried to flash using Win 8.1 , and Win7 ...same thing..touch not working after boot finished.....
I found a similart problem with no solution:
http://forum.xda-developers.com/lg-g...flash-t2922009
I dont know what to do....
Please help
Thanx
shmatul said:
Hello
I have LG G2 32GB from HK
First I Rooted the device, everything was OK- phone works...
Than I decided to burn STOCK ROM , i used LG Flash Tool 2014
Flash was 100% success, no error
After Device finish boot,
In the first Welcome screen (where you choose language)
I cannot touch the screen, everywhere i click (touch) the screen it seems like i touch somewhere else....
I cannot proceed forward from the welcome screen
The phone does not respond to my touch.... broken
The phone goes into Download mode, and quite strange- though i flah unrooted Stock Rom - it still writes that the phone is rooted.....
I tried to flash 5 different ROM (kdz file), None of them helped...same problem for each KDZ
I tried to flash using Win 8.1 , and Win7 ...same thing..touch not working after boot finished.....
I found a similart problem with no solution:
http://forum.xda-developers.com/lg-g...flash-t2922009
I dont know what to do....
Please help
Thanx
Click to expand...
Click to collapse
You have a refurb and a different model. Check my post here. You need to open your phone, you either have the D800 or D801. Flash that ROM, and you wil be fine.
Meppolan said:
You have a refurb and a different model. Check my post here. You need to open your phone, you either have the D800 or D801. Flash that ROM, and you wil be fine.
Click to expand...
Click to collapse
Thanx
The phone was sold as NEW and not Refr.
It was in Genuine box, with Genuine Chrager (and even manual)
Though it might be fraud...
I talked to the seller, and i am sending it back to him
Hopefully he will fix it/replace it
If not i will send him you link..
I think i'm having exactly the same problem with you T_T
shmatul said:
Hello
I have LG G2 32GB from HK
First I Rooted the device, everything was OK- phone works...
Than I decided to burn STOCK ROM , i used LG Flash Tool 2014
Flash was 100% success, no error
After Device finish boot,
In the first Welcome screen (where you choose language)
I cannot touch the screen, everywhere i click (touch) the screen it seems like i touch somewhere else....
I cannot proceed forward from the welcome screen
The phone does not respond to my touch.... broken
The phone goes into Download mode, and quite strange- though i flah unrooted Stock Rom - it still writes that the phone is rooted.....
I tried to flash 5 different ROM (kdz file), None of them helped...same problem for each KDZ
I tried to flash using Win 8.1 , and Win7 ...same thing..touch not working after boot finished.....
I found a similart problem with no solution:
http://forum.xda-developers.com/lg-g...flash-t2922009
I dont know what to do....
Please help
Thanx
Click to expand...
Click to collapse
I think i'm having exactly the same problem as you T_T
so i decided to open my LG G2 to find out which exact model it is, and what i found is LS980 instead of D802.
but when i try to flash it with .tot files with LG flashtool v1.81, but i always got [Download FAIL!!] Check DLL or BIN file.
i also tried to flash it with some KDZ files like (D80210B_00, D80210F_00) i got 100% success but stuck at 1st welcome screen too.
i tried to look for KDZ file for the LS980 version but i can't any, so can someone please help me out here, please?
Would it work if i flash it with KDZ if i can find the LS980 KDZ-file for it?
i hope someone can help me please...
i attached 2pics below and sorry for my bad english.
[email protected] said:
I think i'm having exactly the same problem as you T_T
so i decided to open my LG G2 to find out which exact model it is, and what i found is LS980 instead of D802.
but when i try to flash it with .tot files with LG flashtool v1.81, but i always got [Download FAIL!!] Check DLL or BIN file.
i also tried to flash it with some KDZ files like (D80210B_00, D80210F_00) i got 100% success but stuck at 1st welcome screen too.
i tried to look for KDZ file for the LS980 version but i can't any, so can someone please help me out here, please?
Would it work if i flash it with KDZ if i can find the LS980 KDZ-file for it?
i hope someone can help me please...
i attached 2pics below and sorry for my bad english.
Click to expand...
Click to collapse
You can flash with the TOT, you just need to edit the TOT file in a Hex editor and change the model to what you have (LS980). Look at my post here on how to do that.