V20 and project fi - LG V20 Questions & Answers

I dont know if this has been asked before, will this work on project fi?

The official list at the moment is only Pixels, Nexus 6P and 5X. Not sure why the Nexus 6 isn't still on that list since it was the launch device for the service. (I'm guessing the list is limited to what they officially have stock of.)

The US996 carrier unlocked model would be the closest match for Project Fi, but that model is missing all the Sprint bands. So would only work with T-Mobile's network for FI.
You can check all the compatibility of the US996 here:
https://www.frequencycheck.com/compatibility/WloNsJX/lg-us996-v20-lte-a/united-states

FAUguy said:
The US996 carrier unlocked model would be the closest match for Project Fi, but that model is missing all the Sprint bands. So would only work with T-Mobile's network for FI.
You can check all the compatibility of the US996 here:
https://www.frequencycheck.com/compatibility/WloNsJX/lg-us996-v20-lte-a/united-states
Click to expand...
Click to collapse
That site says sprint's ls997 is compatible with all of project fi's bands... would it work?

hibby50 said:
That site says sprint's ls997 is compatible with all of project fi's bands... would it work?
Click to expand...
Click to collapse
Just because the LS997 from Sprint supports all the bands for Project Fi, there is no guarantee that it would be carrier unlocked to work with Project Fi and its SIM.
https://www.frequencycheck.com/carrier-compatibility/lKrKFAZ/lg-ls997-v20-td-lte/google-project-fi-united-states

Just posting to add that my h910 LG v20 from AT&T does work on fi. The one guy who said that only T-Mobile would work is correct in my case. The v20 doesn't even have the type of dialer codes that are used for forcing network switching on fi supported phones. However I have found some use for this because I have an official supported pixel 2 from Project fi and happened to be a convert from AT&T and thus I had my old h910 to screw around with why the hell not? So to anyone who is familiar with project fi and is also the type of geek who frequents XDA, you are probably aware of apps like signal spy or Signal Info. When I was talking about dialer codes, those apps copy the dialer code to your clipboard and then you paste to your phone dialer which will then switch to either T-Mobile, Sprint, or US Cellular.
Basically what I'm trying to say is that even if your variant of the v20 does have the correct radios to work on the network, at this point I'm unaware of any way to switch between those Networks. That is not to say it is impossible, perhaps somebody can code something that would do that and if so please shoot a message my way. Also you may be disappointed when you find out that picture texting doesn't seem to work, or at least I haven't figured out how to fix it yet.
I currently use my v20 on Project fi very often. Anyone who has a pixel 2 is probably aware that one of the biggest complaints about the February update is reduced battery life, and so I often pull my SIM card out and stick it into my v20. Which does bring me to an interesting note if you are unaware, if you begun your service with project fi on a pixel 2 phone ....... Which does bring me to hun interesting know if you are unaware, if you be gone your service with project fine a pic so to phone.. You will have been activated using the SIM method in which your phone does not actually have a nano SIM inside of it. Now what you can do as a simple little life hack or whatever the hell you want to call it, is call and ask project fi how you go about ordering a free nano SIM. It'll cost you nothing and when you get it you can then activate it to the same phone number as the E Sim. However you cannot use the ECM and the nano SIM simultaneously. But it does allow you to have a backup phone.
Sent from my Pixel 2 using XDA Labs

Now that you can order a SIM directly from Google, will it work with Sprint model V20 if unlocked?
I realize it won't have the carrier switching but that's ok.

I too use my V20 with Project-Fi. I have the T-Mobile variant and everything seems to be working fine. The network switching will not work and will be restricted with T-Mobile service only.. Also, you will be unable to do Wi-Fi calling. Seems to be restricted on non Project-Fi phones. As far as MMS, I've used it only with Hangouts. I like to keep all my conversations synced across devices. I can try MMS via the stock messaging app and see if it works. If data doesn't work, you can try the following APN settings:
Open the Settings app on your device.
Tap More (under Wireless & Networks).
Tap Cellular networks and then Access Point Names.
Tap + (at the top of the screen).
Tap Name and enter "Project Fi".
Tap APN and enter "h2g2".
Save.
Go back to the previous page.
Select Project Fi from the list.
Hope this helps.

hi, I have LGVv20 ATT version, its unlocked. If i use google fi sim, will it work? and switch?
I am trying to not spend a lot on V35. thank you very much

Related

Will the GSM model (US V1) work on Verizon?

Looking at the LTE bands, it seems to have the main ones needed for Verizon service. I don't want to buy the CDMA version in case I need to switch in the near future.
No. Bands may be the same but the radios in the device are different.
Yeah the one I been using the past month only worked with GSM sims. I been using a T-Mobile sim
It does "work" for LTE and data. You will have issues with voice calls though since VOLTE is packaged as part of Verizon's Advanced calling. If you HAVE to use it, set up a google voice or SIP account to forward to your Verizon number. That being said, wait for the CDMA version to be available to have full functionality.

AT&T & Verizon VoLTE and VoWiFi calling/texting thread

Hi all. Posting this for users looking for answers on VoLTE and WoWifi on the 6T on AT&T & Verizon. If users with access to the OP6T could please test and report, that would be very helpful. Since the pixel 3 now supports both VoLTE & VoWiFi (on AT&T) there is perhaps some hope that OnePlus will also support it.
1: On AT&T, is there an option for Voice over LTE and Wifi calling and does it work?
2: On Verizon, I know Voice over LTE will work, but what about Wifi Calling?
Screen shots welcome I will have my hands on the device as soon as its available and will report since I have all the carriers, but thought maybe someone might get their hands on one early and could report. It might make a big difference on whether or now some users buy the device.! Thanks guys!
Yeah, whether or not I get the OP6T depends entirely on whether VoLTE and VoWiFi work on AT&T.
Eagerly waiting for updates!
hosss870 said:
Yeah, whether or not I get the OP6T depends entirely on whether VoLTE and VoWiFi work on AT&T.
Eagerly waiting for updates!
Click to expand...
Click to collapse
Same here!
AT&T & Verizon VoLTE and VoWiFi calling/texting thread
Same here. I’ve got a spot in SC where I got for holidays annually where, without Wi-Fi calling, my phone is a paperweight. I’ve always wanted to try a OnePlus but if there’s no Wi-Fi calling I’ll have to pass and stick with my XS Max.
I’ve already ordered but it’ll be a quick turnaround if that doesn’t work.
Sent from my iPhone using Tapatalk
This question came up in the AMA with the OP team in their community forums last week, and Pei himself said VoWifi isn't supported at the moment.
Just got my device today so update time..
1: VoLTE works on Verizon by default as soon as you pop in the SIM. All the Verizon LTE bands seem to work fine.. in this area, 2,4,13, & 66. no option in the menu for wiFi calling, even though it works fine in my pixel 3 where my verizon SIM just was.
2: Neither VoLTE or VoWiFI work on AT&T by default. No option for either in the settings at all. So no change there from OP5/5T/6 ETC. However, if you go do the dialer, dial *#800# and hit enter, select oneplus logkit, scroll down to function switch and select it, and check the box for VoLTE switch and Vowifi switch and then reboot, it puts the VOLTE setting and VoWiFI setting in for both the Verizon and AT&T SIM. and while you can enable VoWIFI on both Verizon and AT&T, it DOES NOT work on either. On AT&T however, as long as you have a VOLTE capable/recognized IMEI on your AT&T account for your line, VoLTE/HD voice work just fine.
So, while it is amazing to have, for the first time ever a DUAL SIM phone that supports both VZW & AT&T at the same time, it is a too bad that VoWiFI does not work on either, Especially now that the Pixel 3 Supports it on both carriers.
crowsnestitsupport said:
Just got my device today so update time..
1: VoLTE works on Verizon by default as soon as you pop in the SIM. All the Verizon LTE bands seem to work fine.. in this area, 2,4,13, & 66. no option in the menu for wiFi calling, even though it works fine in my pixel 3 where my verizon SIM just was.
2: Neither VoLTE or VoWiFI work on AT&T by default. No option for either in the settings at all. So no change there from OP5/5T/6 ETC. However, if you go do the dialer, dial *#800# and hit enter, select oneplus logkit, scroll down to function switch and select it, and check the box for VoLTE switch and Vowifi switch and then reboot, it puts the VOLTE setting and VoWiFI setting in for both the Verizon and AT&T SIM. and while you can enable VoWIFI on both Verizon and AT&T, it DOES NOT work on either. On AT&T however, as long as you have a VOLTE capable/recognized IMEI on your AT&T account for your line, VoLTE/HD voice work just fine.
So, while it is amazing to have, for the first time ever a DUAL SIM phone that supports both VZW & AT&T at the same time, it is a too bad that VoWiFI does not work on either, Especially now that the Pixel 3 Supports it on both carriers.
Click to expand...
Click to collapse
proof
crowsnestitsupport said:
Hi all. Posting this for users looking for answers on VoLTE and WoWifi on the 6T on AT&T & Verizon. If users with access to the OP6T could please test and report, that would be very helpful. Since the pixel 3 now supports both VoLTE & VoWiFi (on AT&T) there is perhaps some hope that OnePlus will also support it.
1: On AT&T, is there an option for Voice over LTE and Wifi calling and does it work?
2: On Verizon, I know Voice over LTE will work, but what about Wifi Calling?
Screen shots welcome I will have my hands on the device as soon as its available and will report since I have all the carriers, but thought maybe someone might get their hands on one early and could report. It might make a big difference on whether or now some users buy the device.! Thanks guys!
Click to expand...
Click to collapse
Has anyone used the dialer code *#*#4636#*#* & try to toggle VoLTE &/OR VoWI-FI ?
Thanks for the info. I'm looking to get the 6T to use on AT&T. I've never used an unlocked/non-AT&T branded phone on my line. Are there any other limitations that AT&T implements on non-AT&T branded devices? Do they throttle data speeds? Any issues with SMS/MMS working like some Verizon users are experiencing? Would I need to contact AT&T to have any special provisioning just to get it to work? I appreciate any insight on this.
sharksfan7 said:
Thanks for the info. I'm looking to get the 6T to use on AT&T. I've never used an unlocked/non-AT&T branded phone on my line. Are there any other limitations that AT&T implements on non-AT&T branded devices? Do they throttle data speeds? Any issues with SMS/MMS working like some Verizon users are experiencing? Would I need to contact AT&T to have any special provisioning just to get it to work? I appreciate any insight on this.
Click to expand...
Click to collapse
I'm not on AT&T so,I'm not gonna speculate.
Perhaps someone will chime-in soon for more definitive information.
My OnePlus 6t came in today. Took sim out of my Pixel 3 XL and popped it in. Everything is working except I can't SEND text messages. I can receive them and make calls, data is fine (actually amazing 44.5 mbps d/l, which is good for around here.)
I've tried chatting with Verizon, but after I told them what device, there was a long pause and then she asked if it was an iPhone
Here are my troubleshooting steps I've followed.
-deleted app cache and storage
-reset device
-factory reset device
-cleared cache partition in recovery
Any suggestions? I put the sim back in my Pixel and all the messages came through. I've tried both slots.
Mobile network state-Connected
Service state-In service
Mobile voice network type-4g
Mobile data network types-4g
EID-unknown (??)
There is another thread discussing why a lot of people using 6T on Verizon having problem receiving SMS and MMS. Something the phone being LTE only on Verizon. Maybe you are having the same problem? Worth reading that thread.
akmsr said:
There is another thread discussing why a lot of people using 6T on Verizon having problem receiving SMS and MMS. Something the phone being LTE only on Verizon. Maybe you are having the same problem? Worth reading that thread.
Click to expand...
Click to collapse
Yes. that would be best. I didn't need to do anything with mine, it just worked. However, I do have the latest version the the Verizon SIM card. Not sure if that matters. I was using a Pixel 3 before.
sharksfan7 said:
Thanks for the info. I'm looking to get the 6T to use on AT&T. I've never used an unlocked/non-AT&T branded phone on my line. Are there any other limitations that AT&T implements on non-AT&T branded devices? Do they throttle data speeds? Any issues with SMS/MMS working like some Verizon users are experiencing? Would I need to contact AT&T to have any special provisioning just to get it to work? I appreciate any insight on this.
Click to expand...
Click to collapse
I have used AT&T for years on unlocked devices. I have tested everything Data speeds are just fine. no issues there. the OP6T supports all the bands on AT&T so coverage should be just fine for you. The limits are as follows:
1: built in visual voicemail will not work, you will need to use the AT&T visual Voicemail app from the store.
2: Wifi calling/texting will not work
3: VoLTE/HD Voice will only work with the above mentioned trickery. Root is NOT needed. just the *#800# thing
the only provisioning you may need is the AT&T imei for VoLTE (Easiest to do online) after installing your AT&T SIM in the OP6T, if VoLTE doesn't work after following the instruction in this thread, log into your AT&T account and update your IMEI to one of your past AT&T phones that support VoLTE and update, reboot you OP6T and bingo, it will work. No other provisioning or limitations that I know of. And if VoLTE/HD Voice isn't important to you, you can ignore all this. Your existing AT&T SIM just needs installed in your OP6T and your good to go!
KOLIOSIS said:
Has anyone used the dialer code *#*#4636#*#* & try to toggle VoLTE &/OR VoWI-FI ?
Click to expand...
Click to collapse
The *#800# enables all those options. But it doesn't help anything on Verizon, and on AT&T it does work for VoLTE if a VOLTE enabled IMEI is on your AT&T account, but it doesn't work for wifi calling. I wish it was just illegal for the carriers to block services just because its a non branded phone
natypes said:
My OnePlus 6t came in today. Took sim out of my Pixel 3 XL and popped it in. Everything is working except I can't SEND text messages. I can receive them and make calls, data is fine (actually amazing 44.5 mbps d/l, which is good for around here.)
I've tried chatting with Verizon, but after I told them what device, there was a long pause and then she asked if it was an iPhone
Here are my troubleshooting steps I've followed.
-deleted app cache and storage
-reset device
-factory reset device
-cleared cache partition in recovery
Any suggestions? I put the sim back in my Pixel and all the messages came through. I've tried both slots.
Mobile network state-Connected
Service state-In service
Mobile voice network type-4g
Mobile data network types-4g
EID-unknown (??)
Click to expand...
Click to collapse
Here are various threads.. Not sure if there are answers. But again, it just worked for me.. Sorry I'm not more help.
https://forum.xda-developers.com/oneplus-6t/help/verizon-oneplus-6t-im-happy-one-t3863258
https://forum.xda-developers.com/oneplus-6t/help/feeling-6t-verizon-t3861188
https://forum.xda-developers.com/oneplus-6t/help/wifi-calling-incoming-phone-calls-text-t3863595
https://forum.xda-developers.com/oneplus-6t/help/verizon-to-to-sms-t3863352
crowsnestitsupport said:
Just got my device today so update time..
1: VoLTE works on Verizon by default as soon as you pop in the SIM. All the Verizon LTE bands seem to work fine.. in this area, 2,4,13, & 66. no option in the menu for wiFi calling, even though it works fine in my pixel 3 where my verizon SIM just was.
2: Neither VoLTE or VoWiFI work on AT&T by default. No option for either in the settings at all. So no change there from OP5/5T/6 ETC. However, if you go do the dialer, dial *#800# and hit enter, select oneplus logkit, scroll down to function switch and select it, and check the box for VoLTE switch and Vowifi switch and then reboot, it puts the VOLTE setting and VoWiFI setting in for both the Verizon and AT&T SIM. and while you can enable VoWIFI on both Verizon and AT&T, it DOES NOT work on either. On AT&T however, as long as you have a VOLTE capable/recognized IMEI on your AT&T account for your line, VoLTE/HD voice work just fine.
So, while it is amazing to have, for the first time ever a DUAL SIM phone that supports both VZW & AT&T at the same time, it is a too bad that VoWiFI does not work on either, Especially now that the Pixel 3 Supports it on both carriers.
Click to expand...
Click to collapse
So glad that I found this post. I am coming from an AT&T branded Galaxy S8 to my new OnePlus 6T. The above instructions worked like a charm for AT&T. I ran some tests. The OnePlus displays "HD" when I call my wife on her phone on AT&T and VoLTE shows in the status bar. When I toggle it back off I lose "HD" on the phone call screen. Also, LTE stays on during calls with VoLTE turned on and I ran a speedtest with it on and off and I definitely get 4G speed with it on and it downgrades to HSPA+ with VoLTE off and speed goes way down. Hopefully VoWIFI will be supported soon but that's not a deal breaker for me as I get great reception most of the time where I live, work and travel.
KOLIOSIS said:
Has anyone used the dialer code *#*#4636#*#* & try to toggle VoLTE &/OR VoWI-FI ?
Click to expand...
Click to collapse
I am on att had it all working on my unlocked NOTE 8. Now I can't even get volte cause it's all grayed out.
The service providers don't want you to buy unlocked phones. They make zero on them!! So that's why they block stuff. It's an antitrust lawsuit waiting to happen!! A$$h0!€$
Sent from my SM-N960U using Tapatalk
I've got AT&T as my primary and Verizon as #2. I just got off the phone with Verizon, told them I needed to add the CDMA Less feature to fix my texting. He checked a box on his end and I got a flood of texts in...what was even better, it was a work phone on a business account. I didn't even have to provide any real information to him and he was able to fix me up. He was aware of the issue though, he'd asked if it was a 6T from T-Mobile...so someone sent out a bulletin somewhere that he had read.
Anyway, I left Verizon to go to AT&T specifically for this plan of having one phone to cover 2 lines while one being fully functional (AT&T), so far it's been working well switching between SIMs for texting and making phone calls.
What were you specifically looking to find out?
Edit: found what you're looking for...however I'm not sure where those settings are even at.

SIM unlock Verizon VS995 for different carrier

I have a LG V20 (model VS995) that was previously from Verizon. I switched to google Fi and my phone has never worked correctly. After months of delaying doing a full data reset as per their suggestion, I finally did it and rebuilt all of my apps but now when I go through the Google Fi activation process, it says the SIM card can not be read. I even ordered a second card just in case but I get the same error. I have tried multiple times. According to Fi support, they are saying my VS995 was never fully SIM unlocked from Verizon. Before I left Verizon, they told me their phones aren't really locked so there was nothing to do. Can anyone verify that I really don't need to unlock my phone? I have been having issues for months and now my phone has zero phone functionality. It can't send or receive calls at all. I will gladly go to a local Verizon store if needs to be SIM unlocked. I am hoping one of you has an answer as googling "VS995 unlock" beings up countless web sites with zero valuable information that actually works.
FWIW, my phone is not hacked at all.
All VS995 models come SIM-unlocked out of the box because Verizon at that time was required by law to do so (they started SIM-locking their phones again around June 2019), so there is nothing needed to do on Verizon's end to unlock the phone, and I'm not sure why the SIM card can't be read unless Google Fi gave you a Sprint SIM card, which is totally different and only works on the LS997 model. As far as I know, Google Fi's main networks are T-Mobile and Sprint. The VS995 is rather bad in reception for Fi since it has none of Sprint's LTE bands and only has LTE bands 2 and 4 for T-Mobile (lacking bands 12, 66, and 71).

? Using LG V20 H910 AT&T Model On T-Mobile After (2021) VoLTE Change

I posted this ? on reddit as well; however, this device is on its last legs so there's not much interest for it. I've gotten some good answers here and there on this website, but a dedicated thread to gather all the good info might be more helpful.
I still use my AT&T H910 as I don't really do much gaming on it. Calling, texting, and YouTube is what I mostly utilize it for. I just heard about the whole VoLTE requirement on specific devices after 2022 for AT&T, and 2021 for T-Mobile.
I spoke to AT&T, and they re-assured that the H910 was going to be one of the devices supported after 2022; however, I've been thinking about changing to T-Mobile (my family has a great plan with them, and I always switch back and forth between carriers based on who gives me the best deal) but I can't seem to get a straight answer from T-Mobile about whether my unlocked H910 will work with them after 2021; some didn't even know about the 2021 specifics of it.
I know AT&T will have to allow devices to be used on their network after 2022 even if they're VoLTE capable already. By the looks of it, T-Mobile won't go to that extreme; however, does anyone know exactly how VoLTE works? Specially in regards to using the AT&T H910 model on T-Mobile? Does my H910 has the required Bands to utilize VoLTE on T-Mobile? Or is it one of those things like "Wi-Fi Calling" where T-Mobile Wi-Fi calling only works with the LG V20 model from T-Mobile, and AT&T Wi-Fi calling only works with the LG V20 model from AT&T?
You need band 12 support which H910 has. Also a rom with IMS services working so no AOSP roms.
Volte works by using IMS processes in the rom to route phone calls over IP. No volte = no phone calls. But the device will still "work".
In theory the ATT software will work, unlock it and borrow someone else's sim. In theory a partial cross flash (just system, no modem/aboot/etc) could work if it doesn't.
nxb said:
You need band 12 support which H910 has. Also a rom with IMS services working so no AOSP roms.
In theory the ATT software will work, unlock it and borrow someone else's sim.
Click to expand...
Click to collapse
I was recommended to use an app called Network Mode Universal on reddit for VoLTE testing purposes, and after inserting a T-Mobile SIM card that I borrowed on my unlocked H910 and using the application, the Voice Network Type tab says "LTE". Which is supposed to be a sign that VoLTE might be working on the H910 using a T-Mobile SIM, but that's all I know; just what people tell me.
Update:
The person who recommended that Network Mode Universal app forgot to mention that you have to actually make a call to know whether the phone supports VoLTE with the SIM card in use. When actually making a call, the Voice Network Type tab changes from "LTE" to "UMTS". Which means the H910 is not VoLTE capable on T-Mobile.
Sent from my LG-H910 using Tapatalk
Could also be how his sim is set up. Volte has to be enabled there and in the phone. My suggestion would be to force LTE only on the device as well. Does it use VOLTE on his phone?
Also look at IMS registration in the phone and see if it's registered.
nxb said:
Could also be how his sim is set up. Volte has to be enabled there and in the phone. My suggestion would be to force LTE only on the device as well. Does it use VOLTE on his phone?
Also look at IMS registration in the phone and see if it's registered.
Click to expand...
Click to collapse
The person I borrowed the T-Mobile SIM from uses an iPhone on iOS 13. According to him, the option for turning on/off VoLTE from the settings is gone. He used to be able to turn it on and off at will; not anymore after iOS 13. It should be enabled by default on an iPhone though, I don't see why it would be off. It's almost a necessity on an iPhone I would think.
The LG V20 seems to be more limited in that sense, as on my previous Samsung phone I could enable 2G, 4G, LTE, etc, individually to force only one. I don't see any of those settings on my H910. I don't see any IMS info either.
Either way, I doubt T-Mobile would bother servicing my AT&T branded H910 phone in case IMS needed to be registered; in the case that it wasn't already. I've had really bad luck in the past dealing with T-Mobile on phones that are not T-Mobile branded.
Sent from my LG-H910 using Tapatalk
IMS has a phone component and a sim component.
you can check status in the service menu of IMS on the H910. Hope it works on my Tmo phone, getting my sim upgraded
nxb said:
IMS has a phone component and a sim component.
Hope it works on my Tmo phone, getting my sim upgraded
Click to expand...
Click to collapse
It should work if it's a T-Mobile phone. The H918 is 40% more expensive, so it would be great if the H910 worked with T-Mobile; however, it's not looking good.
Sent from my LG-H910 using Tapatalk
Eh, kinda. I'm having trouble too. My IMS services aren't connecting. Going to try a few different roms. I'm through an MVNO so still trying to get them to understand ISIM vs USIM.
see: https://www.quora.com/Are-4G-SIM-cards-of-two-types-VoLTE-and-LTE?share=1
https://www.slideshare.net/ikwe22/understanding-telecom-sim-and-usim-isim-for-lte
nxb said:
Eh, kinda. I'm having trouble too. My IMS services aren't connecting. Going to try a few different roms. I'm through an MVNO so still trying to get them to understand ISIM vs USIM.
Click to expand...
Click to collapse
Gotcha, I hope it works. I was mentioning to @C D which has helped me understand a lot about VoLTE, that I'm starting to give in to the system of using whatever carrier my phone supports, as long as I can keep using my H910. The removable battery & IR blaster era has come to an end, and I don't think I need another phone right now other than the V20. I might even consider going back to the AT&T MVNO I was using before.
Sent from my LG-H910 using Tapatalk
Latest result: oreo works but not nougat.
IMS never registers. Maybe I can fix it. At least now OK sim-wise. Unfortunately doing the sim swap broke tethering.
Hi guys, I am sorry for reviving the old thread.
I too owned H990DS Sea version on latest nougat. It has volte option but just couldn't switch on.
Please take a look at this thread on LG G8
https://forum.xda-developers.com/t/...ther-qualcomm-powered-lg-devices-too.4343655/
I tried on my H990DS using the above thread's method and it didn't work. I was informed that the mbn files are for LG G8. We need mbn files that are specific for LG V20. I have searched up and down and I couldn't find any.
So I hope that I have provided some insights and I hope any member/master/guru out there can help where to find the mbn file (collection of all international carriers mbn) and make volte works for H990DS.

Any hope for Google Fi/T-Mobile VoLTE on int'l G7?

I have a dual-SIM international Moto G7 (XT1962-6) running LineageOS that I was happily using on AT&T until the 3G sunset (and VoLTE whitelist) became a thing.
I was hoping that I could move the phone over to T-Mobile, but testing with a family member's Google Fi SIM has shown that VoLTE doesn't work. (I don't have a T-Mobile SIM handy to test, but I assume that results would be similar.) Calls immediately fail if I disable 3G.
The behavior is exactly as described here - https://gitlab.com/LineageOS/issues/android/-/issues/2178
That post refers to missing "binary blobs," but it never really got resolved, as the user was able to get his phone working by back to the stock firmware, and then back to LineageOS. Unfortunately, I'm guessing that this won't work for me, because the phone is an international model, so even the stock firmware won't have the "magic bits" required to make it work with a U.S. carrier.
Can anyone think of any way to make this work?

Categories

Resources