Database Users

[Guide] Flash xt1069 Android M(6.0) OTA onto Xt1068 Variant

HI Guys...
Finally Marshmallow on my Moto G 2014 Xt1068
XT1069 Firmware works with XT1068 Modems flawlessly!
Procedure to update to Marshmallow
Step 1 : Download zip from here ( RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml.zip) : https://mega.nz/#F!EooXRKqT!je-JHAT1617jGi-YdBmeVg
-- extract the folder,press shift + right click in the same folder,open command prompt.in that command prompt, type all these commands...
Flash it on your XT1068
Code:
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash system system.img_sparsechunk.4
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
Do a reboot!
Step 2 : Download this file : https://mega.nz/#!hQwgxAgR!GKW2EX1x6weV6BIkzPH4MbgWvH_zv307J0UurBsHMok
or https://userscloud.com/y93bwd2vptgl (Thanks for the mirror @manojkumar8552)
It's an OTA update to 22.56.3 and very important in order to flash Marshmallow
Step 3 : Finally get your Marshmallow OTA from here : http://d-h.st/5KAF or https://mega.nz/#!jkNgjYhR!kiFzsLpOJ...n60yo1f8mpx7jI
And flash it via recovery!
Step 4 : Download XT1068 Modem FSG files
Link : http://d-h.st/ktEC
after downloading
Code:
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot reboot
Reboot your Mobile...Enjoy Android 6.0 Marshmallow...
Thanks to Luishr
Akay193 for helping me in this. (http://forum.xda-developers.com/showpost.php?p=63954613&postcount=34).
Note : Do it at your Own Risk and Press Thanks If it helps you out

Thanks for guide

https://userscloud.com/y93bwd2vptgl
Last 5.0 update
---------- Post added at 11:24 PM ---------- Previous post was at 11:10 PM ----------
can u upload /system folder?*

manojkumar8552 said:
https://userscloud.com/y93bwd2vptgl
Last 5.0 update
---------- Post added at 11:24 PM ---------- Previous post was at 11:10 PM ----------
can u upload /system folder?*
Click to expand...
Click to collapse
I tried to find root for 6.0...
if u have got link me,i ll upload twrp backup

srinuchry said:
I tried to find root for 6.0...
if u have got link me,i ll upload twrp backup
Click to expand...
Click to collapse
Glad to see that someone was kind enough to put up a proper guide thread
I hope I was able to help you earlier.
About root, I was looking for a solution, but unfortunately the only way to get root working is by flashing a modded kernel and then supersu zip. Chainfire did this for nexus and someone did this for Moto X 2014.
Unfortunately I don't know anything about modding kernel and we need someone who is able to do that, or else you get bootloop flashing root.

srinuchry said:
I tried to find root for 6.0...
if u have got link me,i ll upload twrp backup
Click to expand...
Click to collapse
Why Dont Simply Flash Chainfire's Zip ???? http://download.chainfire.eu/743/SuperSU/BETA-SuperSU-v2.52.zip
give a TRy.
And Update ResulT

manojkumar8552 said:
Why Dont Simply Flash Chainfire's Zip ???? http://download.chainfire.eu/743/SuperSU/BETA-SuperSU-v2.52.zip
give a TRy.
And Update ResulT
Click to expand...
Click to collapse
I did, results in bootloop and freezes in bootloader warning before bootanimation. The explanation of why is above (at least what I saw in research).

manojkumar8552 said:
Why Dont Simply Flash Chainfire's Zip ???? http://download.chainfire.eu/743/SuperSU/BETA-SuperSU-v2.52.zip
give a TRy.
And Update ResulT
Click to expand...
Click to collapse
Because that would result in an endless bootloop. Already tried.

Should I need to lock my bootloader to update android m

Kunalgosrani said:
Should I need to lock my bootloader to update android m
Click to expand...
Click to collapse
Not at all

luishr said:
I did, results in bootloop and freezes in bootloader warning before bootanimation. The explanation of why is above (at least what I saw in research).
Click to expand...
Click to collapse
what changws need in kernel?*

can someone link me the stock lollipop recovery?

When I try to install OTA 22.56.3 I get Status 7 and "system/app/CalendarGoogle/CalendarGoogle.apk" has unexpected contents. Any idea why?

i m totally mad :- http://forum.xda-developers.com/moto-g-2014/development/kernel-monsterkernel-v1-t3247170 but may be try to flash This ROM !!
Or Req. Kernel Dev. to make one for us

manojkumar8552 said:
what changws need in kernel?*
Click to expand...
Click to collapse
I'm not so sure exactly what, maybe a dev or someone with more experience can take a look and understand better. But looks like needs modifications regarding sepolicy. Take a look at chainfire's thread to see more details in his first post:
http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344
@Vidhanth, maybe you know or have an idea what needs to be done?

luishr said:
I'm not so sure exactly what, maybe a dev or someone with more experience can take a look and understand better. But looks like needs modifications regarding sepolicy. Take a look at chainfire's thread to see more details in his first post:
http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344
@Vidhanth, maybe you know or have an idea what needs to be done?
Click to expand...
Click to collapse
i m still working on the same post u send here !!
Nothing Found

It works? Please say it works, and I will abandon AOSP lol

wojciu92 said:
Unlocked bootloader and TWRP recovery is necessary to flash it right?
Click to expand...
Click to collapse
Unlocked bootloader yes, TWRP no. The process use stock recovery, which is flashed with the ROM in the process of the guide.
---------- Post added at 04:30 PM ---------- Previous post was at 04:28 PM ----------
manojkumar8552 said:
i m still working on the same post u send here !!
Nothing Found
Click to expand...
Click to collapse
I'm talking about this part especifically:
"
Acquiring root without modifying the boot images is still under investigation. Please note that the current method will not be officially supported. Future roots may require a clean system: we are at a very early stage of root for 6.0, methods used are subject to change.
For the modders, you can do the sepolicy modifications yourself as follows:
- root a reference device (4.4+ with SELinux enabled) with v2.50+
- extract the sepolicy file from the target boot image's ramdisk
- with the reference device connected to ADB:
Code:
adb push sepolicy /data/local/tmp/sepolicy
adb shell su -c "supolicy --file /data/local/tmp/sepolicy /data/local/tmp/sepolicy_out"
adb shell su -c "chmod 0644 /data/local/tmp/sepolicy_out"
adb pull /data/local/tmp/sepolicy_out sepolicy_out
- replace the sepolicy file in the boot image's ramdisk with the sepolicy_out file
- profit
"

luishr said:
Code:
adb push sepolicy /data/local/tmp/sepolicy
adb shell su -c "supolicy --file /data/local/tmp/sepolicy /data/local/tmp/sepolicy_out"
adb shell su -c "chmod 0644 /data/local/tmp/sepolicy_out"
adb pull /data/local/tmp/sepolicy_out sepolicy_out
- replace the sepolicy file in the boot image's ramdisk with the sepolicy_out file
- profit
"
Click to expand...
Click to collapse
i get it bro !!!
i need boot.img extractor fror windows !!
with rooted android moto g2 we have to enable enforce first by typing
Code:
# setenforce 1
than get boot.img from phone !!!
and rest of method is described there

srinuchry said:
Step 2 : Download this file : https://mega.nz/#!hQwgxAgR!GKW2EX1x6weV6BIkzPH4MbgWvH_zv307J0UurBsHMok
or https://userscloud.com/y93bwd2vptgl (Thanks for the mirror @manojkumar8552)
It's an OTA update to 22.56.3 and very important in order to flash Marshmallow
Click to expand...
Click to collapse
Am I supposed to install this manually? If I copy the zip to the device it gets detected by the system update, but then the update fails.

(24/10/16) Stock 6.0/Marshmallow for Europe (RETEU) Xt1072 (fast download)

Stock Firmware EU MM update (24/10/16)
XT1072_THEA_RETEU_6.0_MPBS24.65-34-5_cid7_subsidy-DEFAULT (690mb)
Enhancements and August security patch.
Download link: https://drive.google.com/file/d/0B9JdPPX_cXeAZXdGUUtlYU9HSUU/view?usp=drivesdk
Info can be found here:
https://motorola-global-portal.cust...prod_answer_detail/a_id/113470/p/30,6720,9151
All Google drive links are firmware I've downloaded from file factory.
How to:
Download mfastboot https://drive.google.com/file/d/0B9JdPPX_cXeARFN3VXpXdmxBZ2c/view?usp=docslist_api
Extract the thea firware zip items and mfastboot exe file to the android platform tools folder.
Hold Shift + right click - open command prompt then follow follow these commands.
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
First boot can take a little while. Be patient
To keep data, skip mfastboot erase userdata. (not recommended if coming from Lollipop)

Hemphiz said:
I'm assuming "DEFAULT SUBSIDY" means final or finished. Either way it's the newest marshmallow upload for Europe
Click to expand...
Click to collapse
That's related to the release country EMEA, the build number is the same as all the others XT1072 DE, UK, EU-EMEA, GB, LA, etc.

Did this firmware can cause a hard brick? Im asking because there are recently a lot of threads with hard bricked phones (Qualcomm Hs Usb Qdloader 9008)

dr.nic said:
That's related to the release country EMEA, the build number is the same as all the others XT1072 DE, UK, EU-EMEA, GB, LA, etc.
Click to expand...
Click to collapse
ah ok, cheers for the info

imit said:
Did this firmware can cause a hard brick? Im asking because there are recently a lot of threads with hard bricked phones (Qualcomm Hs Usb Qdloader 9008)
Click to expand...
Click to collapse
First I've heard. I simply download it from file factory then upload it to help people out

Do you also have reversed audio channels? (left is right, and right is left) It happens on speakers and headphones.

imit said:
Do you also have reversed audio channels? (left is right, and right is left) It happens on speakers and headphones.
Click to expand...
Click to collapse
I'm using CyanPop. But when I tested out GB/UK Firmware I can't say noticed anything

hello I have the phone in Looked 2, unlock it and then turned the lock, how I can unlock it again? I tried the program I did (Alkalinorap) but gives me error, how the problem is solved? Oto is there any way to make the release?
---------- Post added at 07:21 PM ---------- Previous post was at 07:18 PM ----------
What if I unlock all data is lost, as app whatshapp and other contacts?

xarkit036 said:
hello I have the phone in Looked 2, unlock it and then turned the lock, how I can unlock it again? I tried the program I did (Alkalinorap) but gives me error, how the problem is solved? Oto is there any way to make the release?
---------- Post added at 07:21 PM ---------- Previous post was at 07:18 PM ----------
What if I unlock all data is lost, as app whatshapp and other contacts?
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-g-lte/general/rooting-moto-g-2015-lte-xt1078-t3086069
I used that guide to unlock my bootloader and yes it will erase your data. But you can backup your contacts etc with apps like super backup. You can also backup your WhatsApp to Google drive. It has a built in option

when i rebooted it just keeps on a screen with a motorola logo

Florianbos said:
when i rebooted it just keeps on a screen with a motorola logo
Click to expand...
Click to collapse
Yea it takes a little while. Let it finish. Took about 20+mins for me

Hemphiz said:
http://forum.xda-developers.com/moto-g-lte/general/rooting-moto-g-2015-lte-xt1078-t3086069
I used that guide to unlock my bootloader and yes it will erase your data. But you can backup your contacts etc with apps like super backup. You can also backup your WhatsApp to Google drive. It has a built in option
Click to expand...
Click to collapse
Hello thank you very much. I could go back to unlock.
Apparently I tittle twice and I remain unchecked.
Now all ok. Thank you.
Do you recommend the official rom or this CyanogenMod 6.0.1?:highfive:

xarkit036 said:
Hello thank you very much. I could go back to unlock.
Apparently I tittle twice and I remain unchecked.
Now all ok. Thank you.
Do you recommend the official rom or this CyanogenMod 6.0.1?:highfive:
Click to expand...
Click to collapse
Good stuff.
Personally I prefer custom roms like cyanpop or Cm13 as there's alot of customisation and tweaks available, it's all according what you like

xarkit036 said:
Hello thank you very much. I could go back to unlock.
Apparently I tittle twice and I remain unchecked.
Now all ok. Thank you.
Do you recommend the official rom or this CyanogenMod 6.0.1?:highfive:
Click to expand...
Click to collapse
CM 4 life , or try android aice cold (it's based on cm that one too ?)

ok....thanks all.
It is known about the new android N?
We may have this official version motorola moto G 4G littel?

what is CM 4 life? i I do not understand.

xarkit036 said:
what is CM 4 life? i I do not understand.
Click to expand...
Click to collapse
CM 4 life, means he's a big fan of cyanogenmod aka "CM"
Haven't looked into android N and probably won't until it's abit more stable
Sent from my thea using XDA Labs

i locked the bootloader.
Flashed the rom, Works like a charm!
Thank you! @Hemphiz

Hemphiz said:
CM 4 life, means he's a big fan of cyanogenmod aka "CM"
Haven't looked into android N and probably won't until it's abit more stable
Sent from my thea using XDA Labs
Click to expand...
Click to collapse
:good::laugh: thank´s

because it does motorola official update to Android 6.0.1?
What is the difference between 6.0 and 6.0.1?
Thank you.

Nexus 6P April 2016 security update TWRP flashable zip

Hello all,
Does anyone know how to update the 6P to the latest April 2016 security patch with TWRP?
Can I flash with the nexus factory image from google server?
Thanks.

http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
Section 9 - change names of files to the latest version.

manikandanguru said:
Hello all,
Does anyone know how to update the 6P to the latest April 2016 security patch with TWRP?
Can I flash with the nexus factory image from google server?
Thanks.
Click to expand...
Click to collapse
Flash the System.img and Vendor.img from the April Factory Image, through TWRP.

DJBhardwaj said:
Flash the System.img and Vendor.img from the April Factory Image, through TWRP.
Click to expand...
Click to collapse
brichardson1991 said:
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
Section 9 - change names of files to the latest version.
Click to expand...
Click to collapse
Thanks for the suggestions.
Can I flash all the images mentioned by Heisenberg through TWRP or I should only do it in CMD?
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash cache C:\angler\images\cache.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
like this
I am gonna try it any way. I am downloading it and will report it later.
Thanks again.

manikandanguru said:
Thanks for the suggestions.
Can I flash all the images mentioned by Heisenberg through TWRP or I should only do it in CMD?
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash cache C:\angler\images\cache.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
like this
I am gonna try it any way. I am downloading it and will report it later.
Thanks again.
Click to expand...
Click to collapse
You can flash boot.img, system.img, and vendor.img
Bootloader, Radio, and Cache.img needs to be flashed via fastboot, in bootloader mode.

DJBhardwaj said:
You can flash boot.img, system.img, and vendor.img
Bootloader, Radio, and Cache.img needs to be flashed via fastboot, in bootloader mode.
Click to expand...
Click to collapse
Yeah,
Done it by what you have said.
Thank you so much. Now my 6P is upgrading
I will follow this procedure in future update. :good::good:

manikandanguru said:
Yeah,
Done it by what you have said.
Thank you so much. Now my 6P is upgrading
I will follow this procedure in future update. :good::good:
Click to expand...
Click to collapse
Good to know. And all the best for future upgrades.

hello All upgraded how do i root again now safely?

sunandoghosh said:
hello All upgraded how do i root again now safely?
Click to expand...
Click to collapse
You just need to flash the latest SuperSU through TWRP: BETA-SuperSU-v2.71-20160331103524.zip

DJBhardwaj said:
You just need to flash the latest SuperSU through TWRP: BETA-SuperSU-v2.71-20160331103524.zip
Click to expand...
Click to collapse
thank you so after up gradation do i have still TWRP or i need to first install twrp?
---------- Post added at 03:59 PM ---------- Previous post was at 03:56 PM ----------
DJBhardwaj said:
You just need to flash the latest SuperSU through TWRP: BETA-SuperSU-v2.71-20160331103524.zip
Click to expand...
Click to collapse
Need one more help...should i go for systemless root (not sure If i know if and how to do it) or normal root?
Also am i correct to understand that now that i flashed flash recovery recovery.inmg as part of upgrade the TWRP recovery is gone and I am on stock recovery?

sunandoghosh said:
thank you so after up gradation do i have still TWRP or i need to first install twrp?
Click to expand...
Click to collapse
How did you update? And did you had TWRP prior the upgrade?
Sent from my Nexus 6P using XDA-Developers mobile app
---------- Post added at 04:11 PM ---------- Previous post was at 03:59 PM ----------
sunandoghosh said:
thank you so after up gradation do i have still TWRP or i need to first install twrp?
---------- Post added at 03:59 PM ---------- Previous post was at 03:56 PM ----------
Need one more help...should i go for systemless root (not sure If i know if and how to do it) or normal root?
Also am i correct to understand that now that i flashed flash recovery recovery.inmg as part of upgrade the TWRP recovery is gone and I am on stock recovery?
Click to expand...
Click to collapse
If you upgraded through the regular OTA method or by sideloading, you must be having stock recovery. Now, to install TWRP, you will need the latest image file from here:https://twrp.me/devices/huaweinexus6p.html
Boot your 6P into bootloader mode, and flash using the following command:
Code:
fastboot flash recovery twrp-3.0.2-0-angler.img
As about Systemless/System root, the installer itself goes for the systemless method, and if somehow the requirements fail, it will install to system.

sunandoghosh said:
thank you so after up gradation do i have still TWRP or i need to first install twrp?
---------- Post added at 03:59 PM ---------- Previous post was at 03:56 PM ----------
Need one more help...should i go for systemless root (not sure If i know if and how to do it) or normal root?
Also am i correct to understand that now that i flashed flash recovery recovery.inmg as part of upgrade the TWRP recovery is gone and I am on stock recovery?
Click to expand...
Click to collapse
Yes, if you flashed the recovery.img as part of the update you'll need to flash TWRP again. Just use systemless SuperSU.

do i have to compulsorily flash twrp or can i boot temporarily?

sunandoghosh said:
do i have to compulsorily flash twrp or can i boot temporarily?
Click to expand...
Click to collapse
You can live-boot it instead of flashing it to the device. Where the filename of the recovery is twrp-3.0.2-0-angler.img, the command would be this:
Code:
fastboot boot twrp-3.0.2-0-angler.img

Return to stock with OTA

I know this is a noob but I want to return to 100% stock just like out of the box. Right now I have unlocked bootloader, custom ROM, and rooted. I want to return to stock and if I do will I get OTA updates like normal? And also how would I go about returning to complete stock? But biggest question would be would I receive OTA if I do?

Download original firmware for your region and flash it in fastboot mode. After that you can unroot and relock the bootloader. You will get OTA updates after relocking the bootloader.
Sent from my XT1572 using XDA-Developers mobile app

Here are all the details you need.
http://forum.xda-developers.com/moto-x-style/general/xt1572-mm-twrp-root-xposed-t3276792
---------- Post added at 02:30 PM ---------- Previous post was at 02:27 PM ----------
The thread I have sent says you do not need to relock the bootloader, you will still get the OTA updates.

sr.perro said:
Here are all the details you need.
http://forum.xda-developers.com/moto-x-style/general/xt1572-mm-twrp-root-xposed-t3276792
---------- Post added at 02:30 PM ---------- Previous post was at 02:27 PM ----------
The thread I have sent says you do not need to relock the bootloader, you will still get the OTA updates.
Click to expand...
Click to collapse
Will that work for xt1575? It says xt1752

Jlew7715 said:
Will that work for xt1575? It says xt1752
Click to expand...
Click to collapse
Try this one
http://forum.xda-developers.com/showthread.php?t=3272486
Sent from my XT1572 using XDA-Developers mobile app

Jlew7715 said:
Will that work for xt1575? It says xt1752
Click to expand...
Click to collapse
It was an American user who posted the info about leaving the bootloader unlocked, so I assume its the same for the XT1575
He said :
"HikingMoose #59
Sounds like a waste of time considering you can take OTAs fine with an unocked bootloader. You're welcome!
sent from my XT1575 using Tapatalk"
If you want to leave the bootloader unlocked, don't use these two lines :
fastboot oem lock begin
fastboot oem lock

Also many people (me included) have found the modem doesn't install unless you flash it twice. So change
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
to
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn

Help, I can not return to Stock Firmeware! Erro Partition name

Hey guys! I need help.
this is my erro
fastboot flash boot patched_bootOPW27.113-45-4.img
Sending 'boot__b' (18992 KB) OKAY [ 0.421s]
Writing 'boot__b' (bootloader) Invalid partition name boot__b
FAILED (remote: '')
Finished. Total time: 0.436s
I use this tutorial, the erro occurs in almost all commands
can you give a hand to fix that erro?
Thanks!

@dunno ? first that's not stock. But either way try this instead.
Fastboot flash boot_b ...and the boot image name.
Just one underscore and slot to designate either a or b.
When flashing stock I like mfastboot and flashall.bat file.. A bit dated but does the job where fastboot fails.
Try this let me know if you need help.

Double post

ksk35695 said:
@dunno first that's not stock. But either way try this instead.
Fastboot flash boot_b ...and the boot image name.
Just one underscore and slot to designate either a or b.
When flashing stock I like mfastboot and flashall.bat file.. A bit dated but does the job where fastboot fails.
Try this let me know if you need help.
Click to expand...
Click to collapse
Has a tutorial to how to use a mfastboot and flashall.bat?

Sorry tagged wrong handle..
Duuo said:
Has a tutorial to how to use a mfastboot and flashall.bat?
Click to expand...
Click to collapse
@Duuo,
Of course. There are some recently updated Stock ROM's posted. But any will get you operating.
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274
Brilliant Guide with links you might need.
https://forum.xda-developers.com/ge...ng-mfastboot-exe-to-unbrick-motorola-t3203518
Another brilliant guide with links to download and use mfastboot.
https://forum.xda-developers.com/g6-plus/how-to/flashall-bat-flash-stockfirmware-via-t3789160
The flashall.bat file. Using mfastboot you need to right click, edit the .bat file... place an "m" in front of fastboot & save it.
Place the flashall.bat in the Stock ROM folder.
The mfastboot files go in with adb/fastboot files.
Click the flashall.bat and it should install the system and reboot.

ksk35695 said:
@Duuo,
Of course. There are some recently updated Stock ROM's posted. But any will get you operating.
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274
Brilliant Guide with links you might need.
https://forum.xda-developers.com/ge...ng-mfastboot-exe-to-unbrick-motorola-t3203518
Another brilliant guide with links to download and use mfastboot.
https://forum.xda-developers.com/g6-plus/how-to/flashall-bat-flash-stockfirmware-via-t3789160
The flashall.bat file. Using mfastboot you need to right click, edit the .bat file... place an "m" in front of fastboot & save it.
Place the flashall.bat in the Stock ROM folder.
The mfastboot files go in with adb/fastboot files.
Click the flashall.bat and it should install the system and reboot.
Click to expand...
Click to collapse
doubt:
in the file https://androidfilehost.com/?fid=1322778262904028630, i do not find the system.img and recovery.img.
I found only the files oem_other.img, oem.img and bootloader.img. Which i use?
thanks. sorry for my bad english

Those are the correct files. We do not have a recovery image.
To install a GSI which contains system, boot & vendor image that's a different subject..
Those are the Stock ROM files. Place the fashall.bat file in there after editing click it & will do for you. Or copy/paste Each Command from the First Link with Stock ROM just takes much longer.
---------- Post added at 04:47 AM ---------- Previous post was at 04:45 AM ----------
English is fine. No worries.
---------- Post added at 04:48 AM ---------- Previous post was at 04:47 AM ----------
@Duuo

ksk35695 said:
Those are the correct files. We do not have a recovery image.
To install a GSI which contains system, boot & vendor image that's a different subject..
Those are the Stock ROM files. Place the fashall.bat file in there after editing click it & will do for you. Or copy/paste Each Command from the First Link with Stock ROM just takes much longer.
---------- Post added at 04:47 AM ---------- Previous post was at 04:45 AM ----------
English is fine. No worries.
---------- Post added at 04:48 AM ---------- Previous post was at 04:47 AM ----------
@Duuo
Click to expand...
Click to collapse
Hey! I use the bat file, but i have to edit this file, then use each one command manually, but when im enter the command mfastboot erase DDR a erro occurs:
mfastboot erase DDR
erasing 'DDR'...
(bootloader) Invalid partition name DDR
FAILED (remote failure)
finished. total time: 0.003s
Need i this?
thanks again

No it's fine.
In some stock ROM's it's able to erase DDR partition but not necessary.
---------- Post added at 05:18 AM ---------- Previous post was at 05:16 AM ----------
You shouldn't need to enter all those commands when using the .bat file. That's what it's for. ?

ksk35695 said:
No it's fine.
In some stock ROM's it's able to erase DDR partition but not necessary.
Click to expand...
Click to collapse
Hey man thank you so much for the help! With your help i use my G6plus whit Stock rom again!!

Also you can use just fastboot see if it erases the DDR
---------- Post added at 05:20 AM ---------- Previous post was at 05:19 AM ----------
Duuo said:
Hey man thank you so much for the help! With your help i use my G6plus whit Stock rom again!!
Click to expand...
Click to collapse
Well done! Good job

ksk35695 said:
Also you can use just fastboot see if it erases the DDR
Click to expand...
Click to collapse
ok, i will try