Database Users

Moto E XT1021 Lollipop Soak Test from Brazil

Original : http://www.androidpit.com.br/forum/...21-25-lollipop-brasil-a-partir-da-stock-4-4-4
When I have time I will make a flashable zip with lollipop

Thanks
Sent from my XT1021 using XDA Free mobile app

t-shock said:
Hello to everyone,
I downloaded soak lollipop for xt1021 and right now I'm making it a flash-able VIA CUSTOM RECOVERY​
Link: Making
Click to expand...
Click to collapse
Will be compatible with MOTO E DUAL TV XT1025?

The op says "xt21/25"

t-shock said:
Original : http://www.androidpit.com.br/forum/...21-25-lollipop-brasil-a-partir-da-stock-4-4-4
When I have time I will make a flashable zip with lollipop
Click to expand...
Click to collapse
will this erase all user data?anyway thanks.

TiagoRM said:
Will be compatible with MOTO E DUAL TV XT1025?
Click to expand...
Click to collapse
ONLY FOR XT1021
liborio99 said:
The op says "xt21/25"
Click to expand...
Click to collapse
I'm not saying anything about xt1025
velikopen said:
will this erase all user data?anyway thanks.
Click to expand...
Click to collapse
No only wipe data

t-shock said:
ONLY FOR XT1021
I'm not saying anything about xt1025
Click to expand...
Click to collapse
The topic on their forum says it. Not you. Sorry my bad

i am getting instillation aborted

help me
Hi guys, I'm from Italy I have a different version of Moto E : 21.12.40.condor_reteu.retuall.en.EU reteu
XT1021 MONO SIM
Can I use the same file for update my Moto E in lollipop?

velikopen said:
will this erase all user data?anyway thanks.
Click to expand...
Click to collapse
I install in xt1021, no erase user data, all functions ok, perfect to me.
Put the zip file in memory root directory.
Go Configuration, About Phone, Check for update and done.
Enjoy

@noRetail Nice to hear that lolipop works well.
did you lose any your installed apps from kitkat after update?or everything stayed the same after update?

No lose any app, all work perfect, fast, no lags, I liked very much.
---------- Post added at 03:21 PM ---------- Previous post was at 03:18 PM ----------
I'm from Brazil, I update from Stock 4.4.4 BR, Locked Bootloader, Stock Recovery.

@AlexyPepsy
with brazilian lollipop your phone most likely will not be able to detect sim card..

And the BootAnimation? (Sorry for my bad english, I'm Brazillian)

Always good for me, BootAnimation, SD Card detected and opened, apps working with no errors.
I had the CM11 installed , I went back to stock 4.4.4, not 4.4.2, caught the bootloader , copied the ota zip file available for internal memory, after this the update was easy .
---------- Post added at 08:21 PM ---------- Previous post was at 07:34 PM ----------
Steps followed by me to get lillipop working 100% in xt1021.
Get the zip file in https://mega.co.nz/#!wVsQmajI!tmEkvtEXqjTj_6IdSlsSH9l0ivuUpjtAS2GwF5fncws
Extract the files
In Fastboot mode apply the commands bellow in root user (I use Linux Mint 64)
commands :
if you have bootloader unlocked: fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
if you have bootloader unlocked: fastboot.exe oem lock
fastboot reboot
Apply your Google Account
Get the zip file in https://mega.co.nz/#!IJ9SVCaT!watj3-Z326r4IAHv4NyLo37HD5AQJGnKkg8od_kthLw
Put this zip file in root internal memory
In Fone go to Settings, About Phone, System Updates
After detect and apply update your Moto E have Lollipop 5.0.2
if you have a bootloader unlocked warning in boot phone after update to lillipop
Get the zip file in https://mega.co.nz/#!MFVkCQ7J!W7SmL35Rs--0zX_2-fQGn_IoGZJFHrWDXoHW5hz6l44
unzip the file
In Fastboot mode apply the commands bellow in root user (I use Linux Mint 64)
commands :
fastboot flash logo logo.bin
fastboot reboot
Enjoy.
Hit Thank's if you like help.

Hello Guys
Anyone test this on xt1021 US retail?

lmd052300 said:
Hello Guys
Anyone test this on xt1021 US retail?
Click to expand...
Click to collapse
If you are not received Lollipop OTA then try
[ROM][XT-1021 & 22][LolliPoP] Flashable Lollipop for everyone!!!:good:

I can not have more the carrier signal!
I can not have more the carrier signal!:crying::crying::crying:
Help! Since I installed the Android 5.0.2, can not get carrier signal! Not 2g, 3g, nothing ... the message that appears is: "No Service".
Need urgent help! Otherwise, the ROM is wonderful!
I live in São Paulo, Brazil.
Sorry for the bad English!:fingers-crossed:

confused: how long will it take to make a flashable zip bcuz I'm using a custom rkm and battery life is really bad and I would like stock lollipop. Plz reply. BTW thx for finding a way.

Thanattos said:
I can not have more the carrier signal!:crying::crying::crying:
Help! Since I installed the Android 5.0.2, can not get carrier signal! Not 2g, 3g, nothing ... the message that appears is: "No Service".
Need urgent help! Otherwise, the ROM is wonderful!
I live in São Paulo, Brazil.
Sorry for the bad English!:fingers-crossed:
Click to expand...
Click to collapse
this may be occurs when wrong radio, install only BR stock 4.4.4 and BR soak test.
try follow this: http://forum.xda-developers.com/showpost.php?p=58850753&postcount=15
go back to stock 4.4.4 BR retail and then apply the BR soak test.
work perfect for me, i in São Paulo too bro.

[GUIDE]Safely Restore to Stock

***RESTORE TO STOCK 4.4.4 SAFELY***​
This guide is only for those who have entered into the world of "Customization" after getting the 4.4.4 update via OTA, before unlocking their bootloaders, or for those whose devices were shipped with 4.4.4. ​
After watching so many members of XDA going ahead, skipping important steps while trying to Restore their Moto E to stock 4.4.4, and ultimately ending up failing to do so, or in the worst case a BRICK, it's time I put in a few words here...
If you follow the steps correctly, you WON'T BRICK your device, and will be able to enjoy the fully restored firmware.
1) gpt.bin (WARNING: DO NOT flash this file)
Fastboot command :
mfastboot.exe flash partition gpt.bin
This is the file which contains all the partition information of your phone. It gets updated with each OTA update, and you CANNOT DOWNGRADE the partition table. If you somehow end up flashing the file, either the remaining commands may succeed, or fail... And when, you accept OTAs,!!!BRICKED!!!
2) motoboot.img (WARNING: DO NOT flash this file)
Fastboot command :
mfastboot.exe flash motoboot motoboot.img
This is your bootloader. I have very little info on how it gets flashed through each update... The bootloader is the bios of your phone. If you mess up this file, GOD knows what will happen!!! You won't be able to boot up your device, not even to the bootloader mode (or fastboot mode as some other people call it).
IF ANY ONE OF THE ABOVE FILES ARE MESSED UP, YOU CAN SAY GOODBYE TO YOUR PHONE FOREVER!!
Now, the commands which you should execute are listed below:
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
Now, Check inside your firmware zip for the numbers (system.img_sparsechunk.0, system.img_sparsechunk.1 etc.). If they are 0,1,2 then follow the steps above then type in:
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
Or , if you have like 1,2,3 then type:
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
Now type in:
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
You MUST execute the commands in the order given above, to safely restore to KitKat 4.4.4.
All the best!!! :good:

This is a working tutorial to get and install the 5.1 OTA.

unrooting
when I run the first command ("mfastboot flash partition gpt.bin") in minimal adb...it showing ""mfastboot" is not recognized as an internal or external command" ..please tell me what i missed?

dijusg said:
when I run the first command ("mfastboot flash partition gpt.bin") in minimal adb...it showing ""mfastboot" is not recognized as an internal or external command" ..please tell me what i missed?
Click to expand...
Click to collapse
Why the hell are you trying to do so....?
Does reading my full post waste a lot of time?

Please ELI5 to me:
My condition right now:
Bootloader: 5.1
Bootlock: UNLOCKED
OS: 5.1 Optimized
Root: ROOTED
Can I restore to 4.4.4 by skipping that 2 command?
If so please reword your introduction to:
This guide is only for those who
- Have entered into the world of "Customization" after getting the 4.4.4 update via OTA, before unlocking their bootloaders.
- Device shipped with 4.4.4
- Device that updated to 5.x stock
And your device is
- Unlocked / Locked / Doesn't matter
- Rooted / Not roooted / Doesn't matter
- TWRP-ed / Original recovery intact / doesn't matter
Click to expand...
Click to collapse
Because I'm confused with your introduction.

Rohitagni said:
Why the hell are you trying to do so....?
Does reading my full post waste a lot of time?
Click to expand...
Click to collapse
well not everyone knows how to execute the commands (i dont know it too)
so can you please write us how to execute it?

adjayanto said:
Please ELI5 to me:
My condition right now:
Bootloader: 5.1
Bootlock: UNLOCKED
OS: 5.1 Optimized
Root: ROOTED
Can I restore to 4.4.4 by skipping that 2 command?
If so please reword your introduction to:
Because I'm confused with your introduction.
Click to expand...
Click to collapse
Yes you can do so... Just follow the tutorial.... You can get back to stock safely....
1) Make sure you clear all partitions from your phone except ur sd card... Do this via TWRP
2) Now you have a clean system.... You are ready to enter the commands
MAKE SURE YOU EXECUTE ALL OF THEM IN SEQUENCE (Except the ones I have told to leave out namely gpt and motoboot).
You are done!

Mondop said:
well not everyone knows how to execute the commands (i dont know it too)
so can you please write us how to execute it?
Click to expand...
Click to collapse
Okay... I'm sorry for being harsh...
First of all download the following:
1) Minimal ADB and Fastboot from Here
2) mfastboot.exe from Here
3) Motorola Drivers from Here
4) Kitkat 4.4.4 OS from Here
Download and install 1) and 3) and then tell me.

Rohitagni said:
Okay... I'm sorry for being harsh...
First of all download the following:
1) Minimal ADB and Fastboot from Here
2) mfastboot.exe from Here
3) Motorola Drivers from Here
4) Kitkat 4.4.4 OS from Here
Download and install 1) and 3) and then tell me.
Click to expand...
Click to collapse
already done im trying to update to Lollipop i was following this:
http://forum.xda-developers.com/showthread.php?t=2759495
http://forum.xda-developers.com/moto-e/general/solution-stuck-bootlogo-flashing-5-1-t3168109
and eveything was working fine except that im stucked at boot animation :/
---------- Post added at 11:17 AM ---------- Previous post was at 11:08 AM ----------
well, trying to find on internet why im stucked, i left my device to continue on booting and magically, after 10mins, android jumped on so im happy Lollipop owner :3

Mondop said:
already done im trying to update to Lollipop i was following this:
http://forum.xda-developers.com/showthread.php?t=2759495
http://forum.xda-developers.com/moto-e/general/solution-stuck-bootlogo-flashing-5-1-t3168109
and eveything was working fine except that im stucked at boot animation :/
---------- Post added at 11:17 AM ---------- Previous post was at 11:08 AM ----------
well, trying to find on internet why im stucked, i left my device to continue on booting and magically, after 10mins, android jumped on so im happy Lollipop owner :3
Click to expand...
Click to collapse
Well I am happy to hear that...
Always remember one thing:
HAVE PATIENCE!

Rohitagni said:
Well I am happy to hear that...
Always remember one thing:
HAVE PATIENCE!
Click to expand...
Click to collapse
yop, thaks for your time but i have rly one problem... after installing Lollipop, i cant connect to any mobile operator. is that problem caused by fact, lollipop i installed is from Brozail or whatever? is there any fix for that?

nope your tutorial bricked my phone :/ it will not help when you will not flash gpt.bin
just restored back, updated and boom bricked... your guide does not help

not working
Hi, I did everything as per post.
After rebbot I am shown old boot menu for some time.
But then I am back into lolipop .... Please advise if I missed something.

I just followed your instructions. They seem to have worked well. Thanks!
One comment- I understand that the first two commands are not to be followed, but perhaps it would be wiser to not give the full command that will brick the phone? That way people who just see the number and the command won't just be bricking their phone when they don't read the full instructions. Just say "don't use any command that includes gpt" or something like that instead of giving them the command.

LeiraHoward said:
I just followed your instructions. They seem to have worked well. Thanks!
One comment- I understand that the first two commands are not to be followed, but perhaps it would be wiser to not give the full command that will brick the phone? That way people who just see the number and the command won't just be bricking their phone when they don't read the full instructions. Just say "don't use any command that includes gpt" or something like that instead of giving them the command.
Click to expand...
Click to collapse
I like your suggestions... But I made this post for those who wanted to downgrade.
I hope u understand that downgrading is a very risky process, and EVERYONE SHOULD READ EVERY SINGLE LINE prior to trying to mess with their phone. Some told me to write the full commands so that they can clearly understand, while some like you are telling me to be more precise
Well, it's too tough for me to step on two boats at the same time. But still, I will try to be more precise for my next tutorial

Mondop said:
nope your tutorial bricked my phone :/ it will not help when you will not flash gpt.bin
just restored back, updated and boom bricked... your guide does not help
Click to expand...
Click to collapse
I told not to flash the gpt, AS WELL AS THE MOTOBOOT... It has been proved by other devs here at XDA, that these two will brick ur phone, and not the other ones!!!
So, don't blame me. You must have done something that was not mentioned here, that was responsible for the brick.

Mondop said:
nope your tutorial bricked my phone :/ it will not help when you will not flash gpt.bin
just restored back, updated and boom bricked... your guide does not help
Click to expand...
Click to collapse
How did the phone get bricked if you booted it successfully to lollipop? I think I must be making a mistake as in the earlier post, u said u were a "happy lollipop owner"????

rahul1042 said:
Hi, I did everything as per post.
After rebbot I am shown old boot menu for some time.
But then I am back into lolipop .... Please advise if I missed something.
Click to expand...
Click to collapse
Can u give me the link of the firmware? I think something is wrong with the files....
Else you can directly flash the 5.1 fresh by following the instructions from here

Rohitagni said:
I told not to flash the gpt, AS WELL AS THE MOTOBOOT... It has been proved by other devs here at XDA, that these two will brick ur phone, and not the other ones!!!
So, don't blame me. You must have done something that was not mentioned here, that was responsible for the brick.
Click to expand...
Click to collapse
I DID NOT flashed gpt as well MOTOBOOT
---------- Post added at 11:07 AM ---------- Previous post was at 11:06 AM ----------
Rohitagni said:
How did the phone get bricked if you booted it successfully to lollipop? I think I must be making a mistake as in the earlier post, u said u were a "happy lollipop owner"????
Click to expand...
Click to collapse
I flashed to Lollipop succesfully but since this is POST for restoring back to stock, i used it to go back to Kit Kat and thats where my mobile was bricked

Mondop said:
I DID NOT flashed gpt as well MOTOBOOT
---------- Post added at 11:07 AM ---------- Previous post was at 11:06 AM ----------
I flashed to Lollipop succesfully but since this is POST for restoring back to stock, i used it to go back to Kit Kat and thats where my mobile was bricked
Click to expand...
Click to collapse
So... In that case tooo? Did u leave out the bootloader and the partition?

"No SIM Card" Error after installing LineageOS

I followed the guide here: https://forum.xda-developers.com/mo.../rom-lineageos-14-1-moto-e4-qualcomm-t3690156
But now the sim card reader is not working.
I then installed the stock ROM using this guide: http://techposts.org/unbrick-moto-g4-plus-flash-stock-romfirmware/
But it is still not working.
I really don't think it's a hardware issue because the contacts are all there and clean. The sim card works in other phones so it's not that either.
I'm actually not sure if it worked before this, but I'm pretty sure it did. Because I flashed the moment I got the phone.
Thanks for your help!

kidbao said:
I followed the guide here: https://forum.xda-developers.com/mo.../rom-lineageos-14-1-moto-e4-qualcomm-t3690156
But now the sim card reader is not working.
I then installed the stock ROM using this guide: http://techposts.org/unbrick-moto-g4-plus-flash-stock-romfirmware/
But it is still not working.
I really don't think it's a hardware issue because the contacts are all there and clean. The sim card works in other phones so it's not that either.
I'm actually not sure if it worked before this, but I'm pretty sure it did. Because I flashed the moment I got the phone.
Thanks for your help!
Click to expand...
Click to collapse
Do you have the plus model? This is for the regular e4. Probably should have activated it first too.
Which model do you have? Qualcomm? Mediatek? What carrier? You have to flash the proper firmware.

madbat99 said:
Do you have the plus model? This is for the regular e4. Probably should have activated it first too.
Which model do you have? Qualcomm? Mediatek? What carrier? You have to flash the proper firmware.
Click to expand...
Click to collapse
Hi thanks for responding! I have the E4 XT1765. It's Qualcomm. MetroPCS. I tried the PERRY_METROPCS_C and PERRY_METROPCS_C_7.1.1 from from here: firmware. center/firmware/Motorola/Moto%20E4/Stock/

Same issue on one of my XT1765 MetroPCS E4's... it didn't happen after installing LineageOS, tho (maybe wrong thread to post this?). It happened after fiddling with several things - editing build.prop, installing unofficial apps, and disabling/re-enabling bloatware/system apps. I also lost the camera completely and lost all lockscreen notifications. I tried researching the problem, undoing all the changes, and even installing LineageOS. I've since re-installed stock several times on it and all the issues are corrected, except the SIM one - it just stays on Emergency Calls Only or sometimes No Sim, even with a known working, activated SIM card at the MetroPCS store. They suspected hardware (I don't, too coincidental on timing), but wouldn't submit it for repair as the screen is cracked a bit, so no warranty. For $50, it's a great phone, tho, so I bought another one.
It'd be nice to know if there is a fix for this. I tried all the suggestions I could find online.

Flash aokp latest build

beachfl said:
Same issue on one of my XT1765 MetroPCS E4's... it didn't happen after installing LineageOS, tho (maybe wrong thread to post this?). It happened after fiddling with several things - editing build.prop, installing unofficial apps, and disabling/re-enabling bloatware/system apps. I also lost the camera completely and lost all lockscreen notifications. I tried researching the problem, undoing all the changes, and even installing LineageOS. I've since re-installed stock several times on it and all the issues are corrected, except the SIM one - it just stays on Emergency Calls Only or sometimes No Sim, even with a known working, activated SIM card at the MetroPCS store. They suspected hardware (I don't, too coincidental on timing), but wouldn't submit it for repair as the screen is cracked a bit, so no warranty. For $50, it's a great phone, tho, so I bought another one.
It'd be nice to know if there is a fix for this. I tried all the suggestions I could find online.
Click to expand...
Click to collapse
Yeah same. I tried everything :\

nayan deka said:
Flash aokp latest build
Click to expand...
Click to collapse
aokp doesn't have a build for my device. The closest they have is the Moto E line, not E4

kidbao said:
aokp doesn't have a build for my device. The closest they have is the Moto E line, not E4
Click to expand...
Click to collapse
There's an unofficial one here in the forum
https://forum.xda-developers.com/mo...aokp-rom-oms-substratum-t3748033/post75529247

ok. Now I'm thinking why would aokp help me? I tried installing dotOS and resurrection. So I don't think another custom ROM will help.

kidbao said:
ok. Now I'm thinking why would aokp help me? I tried installing dotOS and resurrection. So I don't think another custom ROM will help.
Click to expand...
Click to collapse
I don't know. I was just pointing out that we had one, lol. Not sure it will help you.
I see you "solved" it, lol

Hey guys! So I solved it. I reinstalled the stock rom using this instead: https://forum.xda-developers.com/moto-e4/how-to/guide-flash-stock-firmware-recovery-t3738165. Make sure you change the two lines with oem_sparsechunk with just one like of oem.

kidbao said:
Hey guys! So I solved it. I reinstalled the stock rom using this instead: https://forum.xda-developers.com/moto-e4/how-to/guide-flash-stock-firmware-recovery-t3738165. Make sure you change the two lines with oem_sparsechunk with just one like of oem.
Click to expand...
Click to collapse
Not for me. As we've said, re-installing stock ROM doesn't seem to solve the problem for some people, but it's cool it did for you. Other forums are peppered with people experiencing the same SIM issue, some even apparently happening at random.

beachfl said:
Same issue on one of my XT1765 MetroPCS E4's... it didn't happen after installing LineageOS, tho (maybe wrong thread to post this?). It happened after fiddling with several things - editing build.prop, installing unofficial apps, and disabling/re-enabling bloatware/system apps. I also lost the camera completely and lost all lockscreen notifications. I tried researching the problem, undoing all the changes, and even installing LineageOS. I've since re-installed stock several times on it and all the issues are corrected, except the SIM one - it just stays on Emergency Calls Only or sometimes No Sim, even with a known working, activated SIM card at the MetroPCS store. They suspected hardware (I don't, too coincidental on timing), but wouldn't submit it for repair as the screen is cracked a bit, so no warranty. For $50, it's a great phone, tho, so I bought another one.
It'd be nice to know if there is a fix for this. I tried all the suggestions I could find online.
Click to expand...
Click to collapse
By installing unofficial apps, what do you mean?
And what system apps, specifically, did you re-enable or disable?
---------- Post added at 09:33 PM ---------- Previous post was at 09:25 PM ----------
kidbao said:
Hey guys! So I solved it. I reinstalled the stock rom using this instead: https://forum.xda-developers.com/moto-e4/how-to/guide-flash-stock-firmware-recovery-t3738165. Make sure you change the two lines with oem_sparsechunk with just one like of oem.
Click to expand...
Click to collapse
But which one do we delete? sparsechunk.0 or sparsechunk.1? And beachfl says to leave out gpt.bin...

Scholeggo said:
By installing unofficial apps, what do you mean?
And what system apps, specifically, did you re-enable or disable?
Click to expand...
Click to collapse
Unofficial apps... I just mean any apps that I didn't get from the Google Play Store. Nothing too dodgy, but I just can never rule out that those might be a factor in issues.
Specifically, I played around with disabling/uninstalling the MetroPCS apps (MyMetro, NameID, MetroZone) and a few things that had "Moto" in the name, not sure which... that's all.
Scholeggo said:
But which one do we delete? sparsechunk.0 or sparsechunk.1? And beachfl says to leave out gpt.bin..
Click to expand...
Click to collapse
You delete both those lines and replace them. Unlike the system.img file, which you do have to flash in 'sparsechunks', the oem.img file in this phone's stock ROM isn't in chunks, so flashing it is as a whole, with only one line, as follows:
> fastboot flash oem oem.img
And yah, I don't understand why, but I found flashing the partition table (gpt.bin) made my phone bootloop. Omitting it worked.
HTH.

beachfl said:
Unofficial apps... I just mean any apps that I didn't get from the Google Play Store. Nothing too dodgy, but I just can never rule out that those might be a factor in issues.
Specifically, I played around with disabling/uninstalling the MetroPCS apps (MyMetro, NameID, MetroZone) and a few things that had "Moto" in the name, not sure which... that's all.
You delete both those lines and replace them. Unlike the system.img file, which you do have to flash in 'sparsechunks', the oem.img file in this phone's stock ROM isn't in chunks, so flashing it is as a whole, with only one line, as follows:
> fastboot flash oem oem.img
And yah, I don't understand why, but I found flashing the partition table (gpt.bin) made my phone bootloop. Omitting it worked.
HTH.
Click to expand...
Click to collapse
So, basically, to get back to original ROM, flash the following:
fastboot oem fb_mode_set
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Compared to the original:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash oem oem.img_sparsechunk.0
fastboot flash oem oem.img_sparsechunk.1
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
?
Note that the e4 I'll get is from MetroPCS, and I own a Windows 10 PC, so do I have to add sudo -s before each line?

Scholeggo said:
So, basically, to get back to original ROM, flash the following:
Compared to the original:
?
Note that the e4 I'll get is from MetroPCS, and I own a Windows 10 PC, so do I have to add sudo -s before each line?
Click to expand...
Click to collapse
Yup, that list all looks exactly like what I did.
'sudo -s' .... no, you don't include that when running fastboot from Windows, it's a Linux thing. I'm not sure you have to, but I do always run adb/fastboot from a command prompt with admin priveleges when I'm using WIndows. which is kinda the same thing as 'sudo' on Linux.

Scholeggo said:
So, basically, to get back to original ROM, flash the following:
Compared to the original:
?
Note that the e4 I'll get is from MetroPCS, and I own a Windows 10 PC, so do I have to add sudo -s before each line?
Click to expand...
Click to collapse
I use the rsdlite from rootjunky and it works fine on Windows 10. Well it does on mine. I couldn't say for sure every PC. But I've flashed 2 e4's on mine with rsdlite. So much easier.
http://rootjunkysdl.com/files/Android Programs/RSDLite6.2.4.zip
Go to Android programs and scroll down to rsdlite 6.2.4
Edit: link corrected

madbat99 said:
I use the rsdlite from rootjunky and it works fine on Windows 10. Well it does on mine. I couldn't say for sure every PC. But I've flashed 2 e4's on mine with rsdlite. So much easier.
http://rootjunkysdl.com/files/Android Programs/RSDLite6.2.4.zip
Click to expand...
Click to collapse
Yep, similar experience. I hate doinking around in fastboot if another option exists. That said, one needs to be comfortable at the command line in case something goes amiss.

Davey126 said:
Yep, similar experience. I hate doinking around in fastboot if another option exists. That said, one needs to be comfortable at the command line in case something goes amiss.
Click to expand...
Click to collapse
For sure. Comfort in fastboot is a must

madbat99 said:
I use the rsdlite from rootjunky and it works fine on Windows 10. Well it does on mine. I couldn't say for sure every PC. But I've flashed 2 e4's on mine with rsdlite. So much easier.
http://rootjunkysdl.com/files/Android Programs/RSDLite6.2.4.zip
Click to expand...
Click to collapse
Like some others, RSDLite couldn't see my E4 from Windows 10

[STOCK][ALJETER]Firmware Moto G6 Play - OPP27.91-87

DISCLAIMER
I am not to be held responsible for any of the damage that occurs to your device during this process. You are yourself responsible for any damage done (if) to your device during this process.
REQUIREMENTS
Make sure your device is charged above 80%.
We recommend creating a backup of all your important files before beginning with this process.
HOW TO INSTALL STOCK ROM IN MOTO G6:
Download Moto G6 Stock Firmware from below (in download section).
Install Motorola Driver and ADB Fastboot Driver on your PC.
Now extract stock firmware in ADB Fastboot folder.
Now, turn off your device and boot into bootloader by pressing volume down button +power button simultaneously.
Now, connect your device to your PC via a USB Cable.
Open a command prompt window and type the following commands:
THANKS MOTOROLA FIRMWARE
Moto G6 Play: Drive (password : MotorolaFirmwaresLB )
ALJETER_OPP27.61-14-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.rar
Moto G6 Play: AFH
ALJETER_OPP27.61-14-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.rar
Moto G6 Play: Drive (password : MotorolaFirmwaresLB )
ALJETER_OPP27.91-87_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.rar
adb fastboot
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash oem oem.img
fastboot flash vendor vendor.img
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
Click to expand...
Click to collapse

Hi @lohanbarth,
Please change the title of the thread to "[STOCK][ALJETER]Firmware Moto G6 Play".
The reason is to be consistent with the other two threads for "G6" and "G6 Plus".
With this change will be more easy to distinguish for users of the "G6 family".
And thank you for provide theses firmwares! :good:

Sorry if this is a dumbass question but can I flash this on the boost/Sprint variant since it can be bootloader unlocked? And will it remove the bloatware downloading from boost/Sprint. Again sorry if it's a dumb question.

ninjakira said:
Sorry if this is a dumbass question but can I flash this on the boost/Sprint variant since it can be bootloader unlocked? And will it remove the bloatware downloading from boost/Sprint. Again sorry if it's a dumb question.
Click to expand...
Click to collapse
This is the ALJETER device. The sprint/boost version is the JETER.

moto g6 play xt1922-4
I tried to relock bootloader in my moto g6 play xt1922-4 but i had a problem with boot.img.
( bootloader) Still require signed boot.img bad key
do you have the original rom for xt1922-4? please help

kwiksi1ver said:
This is the ALJETER device. The sprint/boost version is the JETER.
Click to expand...
Click to collapse
Can we get stock firmware for the JETER?
I have one tell me what you need and I'll help the best I can

zindak335 said:
I tried to relock bootloader in my moto g6 play xt1922-4 but i had a problem with boot.img.
( bootloader) Still require signed boot.img bad key
do you have the original rom for xt1922-4? please help
Click to expand...
Click to collapse
sounds like i ran into same thing with my xt1922-9 bad kay when i unlocked bootloader

hello
none of these firmwares seem to work on my moto g6 1922-9 when i flash through adb i get meany errors, i think it all started when i unlocked boot loader . any help would be great

FizzyAps said:
Can we get stock firmware for the JETER?
I have one tell me what you need and I'll help the best I can
Click to expand...
Click to collapse
That’s what we boost mobile phone owners are looking for.

Yeah
suicidedoordavid said:
That’s what we boost mobile phone owners are looking for.
Click to expand...
Click to collapse
I have a unrooted on if some could walk me through the steps to get it off the the phone it’s self I would

I have tried this a hundred times and it's simply will not flash on the Moto G6 play

timelessxiii said:
I have tried this a hundred times and it's simply will not flash on the Moto G6 play
Click to expand...
Click to collapse
If you have a bricked boost mobile variant and need a jeter rom u can try this backup: https://drive.google.com/open?id=1pHiR6fssHOTJ-13-yttipMdB-DBNv_IM
Just unzip it and put it inside the TWRP folder on your phone and click Restore with twrp. It should flash. I tested it twice on my G6 Play (boost mobile variant) (jeter)

I actually got it flashed through twarp it said it was a success but when I reboot my phone it stays on the Motorola splash screen
---------- Post added at 06:12 AM ---------- Previous post was at 06:11 AM ----------
I've got to admit that's closer than I've ever been
---------- Post added at 07:00 AM ---------- Previous post was at 06:12 AM ----------
steveg322 said:
If you have a bricked boost mobile variant and need a jeter rom u can try this backup: https://drive.google.com/open?id=1pHiR6fssHOTJ-13-yttipMdB-DBNv_IM
Just unzip it and put it inside the TWRP folder on your phone and click Restore with twrp. It should flash. I tested it twice on my G6 Play (boost mobile variant) (jeter)
Click to expand...
Click to collapse
bookmobile is cdma the one i have xt1922-9 is a gsm that probley why it wont go a passed the Motorola splash screen after flashing

I followed all the steps, but at the time of restart, I sent back to the boot manager, I had to install the previous firmware

Bty I found the right firmware for the Moto g6 play 1922-9 and it works flawless

if at the end of flashing it is returned to the bootloader...
1 clarification about the firmware opp27.91-87.. in the command lines, one of the system lines is missing:
fastboot flash system system.img_sparsechunk.4
If they add it to the .bat, or if they include it manually, it should start without problems

problem with sound
i flashed my xt1922-4 a few hours ago, but first problem that i found, was the calls, speaker no sound when make or receive calls, only handset and can't install magisk (boot loop after boot moto sequence)

Wid_w said:
i flashed my xt1922-4 a few hours ago, but first problem that i found, was the calls, speaker no sound when make or receive calls, only handset and can't install magisk (boot loop after boot moto sequence)
Click to expand...
Click to collapse
I have the same model and I noticed that one of the lines in the bat file is wrong, the dspso.bin is actually adspso.bin (line 5), just edit it and it should work fine:
fastboot flash dsp adspso.bin
In addition, add the line that Wid_w mentions:
fastboot flash system system.img_sparsechunk.4
I attach my edited .bat file, I just 've flashed mi phone and everything seems to work without problems.

Thansk for guide, but i cant install Magisk on this OPP27.91-87, stay in M Logo. Any Help? (my poor english)

Moto g6 plus on startup bootloop

Hi, I have looked for this problem, but cannot find any answers. I tried to flash a copy of the official rom on my phone, The bootloader is unlocked but not rooted. It seemed to go well, but now is on a permante startup loop.
I can get into fastboot and recovery, is there any way I can recover from this?
in fastboot it says baseband not found.
Any help will be really appreciated

First I need to know which firmware exactly do you flashed on your device?
Baseband not found is normal...

WoKoschekk said:
First I need to know which firmware exactly do you flashed on your device?
Baseband not found is normal...
Click to expand...
Click to collapse
I'm not sure, can you tell me how to find it,
Sorry for being so stupid

Barb28n said:
I'm not sure, can you tell me how to find it,
Sorry for being so stupid
Click to expand...
Click to collapse
Ok... I guess you flashed the wrong firmware. But that's no problem. Just answer the questions below and you'll get a link to the correct firmware. Once you flash it your device will be fine again.
do you have a moto g6 plus?
where are you from? there are different firmwares
e.g. for Europe, India, etc.

It is the moto g6 plus, international version,
WoKoschekk said:
Ok... I guess you flashed the wrong firmware. But that's no problem. Just answer the questions below and you'll get a link to the correct firmware. Once you flash it your device will be fine again.
do you have a moto g6 plus?
where are you from? there are different firmwares
e.g. for Europe, India, etc.
Click to expand...
Click to collapse
It is the moto g6 plus, international version, bought from Amazon, Just wondering if I had the right firmware, and put it on the sd card,could I flash it from there? the bootloader is unlocked, but not rooted.
Thanks for any help

Barb28n said:
It is the moto g6 plus, international version, bought from Amazon, Just wondering if I had the right firmware, and put it on the sd card,could I flash it from there? the bootloader is unlocked, but not rooted.
Thanks for any help
Click to expand...
Click to collapse
No, you have to flash it via fastboot. However you can also try the Lenovo moto flash tool that does it for you

Barb28n said:
Hi, I have looked for this problem, but cannot find any answers. I tried to flash a copy of the official rom on my phone, The bootloader is unlocked but not rooted. It seemed to go well, but now is on a permante startup loop.
I can get into fastboot and recovery, is there any way I can recover from this?
in fastboot it says baseband not found.
Any help will be really appreciated
Click to expand...
Click to collapse
What exactly have you done...? Do you know how to flash a new firmware or not??
---------- Post added at 05:53 AM ---------- Previous post was at 05:19 AM ----------
A little guide to get the correct firmware for your device:
1. go to fastboot mode
2. type the following command
Code:
fastboot getvar ro.carrier
the output will be:
Code:
ro.carrier: [I]your software channel[/I]
3. follow this link:
https://mirrors.lolinet.com/firmware/moto/evert/official/
and choose "your software channel"
(e.g. reteu / retail / retin, etc.)
4. download the latest firmware
***********************************************
How to flash a new firmware
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274
But do not use the firmware from this page!!
!!Only use the firmware you downloaded in step 4. !!

juampapo546 said:
No, you have to flash it via fastboot. However you can also try the Lenovo moto flash tool that does it for you
Click to expand...
Click to collapse
Can you explain how to do that please, I think I tried the moto flash tool,and it couldn't find my phone.

Barb28n said:
Can you explain how to do that please, I think I tried the moto flash tool,and it couldn't find my phone.
Click to expand...
Click to collapse
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274

WoKoschekk said:
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274
Click to expand...
Click to collapse
Thanks, I will try it, I have done it before,but not for a while. Trying to keep this a se
cret from Hubby as he will go ballistic!! LOL

WoKoschekk said:
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274
Click to expand...
Click to collapse
Thank you, thankyou, it worked, now I have to try and get rid of the warning message about the bootloader being unlocked, You are an absolute star !!!

Barb28n said:
Thank you, thankyou, it worked, now I have to try and get rid of the warning message about the bootloader being unlocked, You are an absolute star !!!
Click to expand...
Click to collapse
Download and extract the logo.zip attachment. It contains a logo.bin file. Copy logo.bin to /sdcard (internal storage), open terminal app and type:
Code:
su
dd if=/sdcard/logo.bin of=/dev/block/by-name/logo`getprop ro.boot.slot_suffix`
Reboot and enjoy your new logo!
On the top left corner you'll see the 'Verity mode is set to disabled' message which is quiet normal.

I am having the same exact problem as the OP (except I haven't done anything to my phone lately, it just ran out of battery, shut down, and went into endless bootloop after I charged it up).
I tried following the above instructions (my software channel is RETLA) and found two "latest" versions as of this posting (and both zip files were found identical by the diff command, as were their contents after I unzipped them)-- XT1926-6_EVERT_RETLA_SS_9.0_PPWS29.116-11-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip and XT1926-7_EVERT_RETLA_DS_9.0_PPWS29.116-11-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip.
I tried flashing the XT1926-7 one and my phone is still in a boot loop. Since the other file is identical, I'm not expecting it to work either. So, which version of these firmwares is the correct one to use?
I thought that the point was that all these would work with a G6plus in the RETLA channel and some were just newer than others.
Thanks.
---------- Post added at 07:00 AM ---------- Previous post was at 06:07 AM ----------
I tried an earlier one, XT1926-7_EVERT_RETLA_DS_9.0_PPWS29.116-11-8_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip and got...
Can't load Android system. Your data may be corrupt. If you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device.
Click to expand...
Click to collapse
I went back to the earliest available 9.0 firmware, XT1926-7_EVERT_RETLA_9.0_PPW29.116-11_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip, flashed that, and still the above message.
Can anybody help?
Thanks.
---------- Post added at 07:03 AM ---------- Previous post was at 07:00 AM ----------
I do have TWRP installed on my SD card. Can that be used to unbrick the phone?
---------- Post added at 07:20 AM ---------- Previous post was at 07:03 AM ----------
...and wiping the cache from TWRP didn't fix it either -- still the same message about data being corrupt. Now I'm truly out of ideas.

Boot into fastboot mode to see which FW is the correct one for you.

Barb28n said:
Hi, I have looked for this problem, but cannot find any answers. I tried to flash a copy of the official rom on my phone, The bootloader is unlocked but not rooted. It seemed to go well, but now is on a permante startup loop.
I can get into fastboot and recovery, is there any way I can recover from this?
in fastboot it says baseband not found.
Any help will be really appreciated
Click to expand...
Click to collapse
Well, i read this post and answers till the end, as it describes very well my problem, but no such solution, so if someone could help would be great !
The device is Moto G6 plus XT1926-8 and i still have all acess to fastboot, and recovery by pressing keys, i've already flashed this roms:
XT1926-8_EVERT_RETBR_9.0_PPWS29.116-16-18_subsidy-DEFAULT_regulatory-DEFAULT_CFC
XT1926-8_EVERT_RETBR_9.0_PPWS29.116-16-15_subsidy-DEFAULT_regulatory-DEFAULT_CFC
stockrom.net_XT1926-8_EVERT_RETBR_9.0_PPWS29.116-16-11_subsidy-DEFAULT_regulatory-DEFAULT_CFC
in this order, but always got an infinite bootloop that sometime comes to inicial screens where you can click "start" set wifi, etc, but the device always restart no matter i click into it, or wait till a suposed "end" of restart rotine, that never came, always come to a restart showing my unlocked bootloader screen etc etc. I could suggest now try flashing a android 8 version rom, but for my experience, i have fear (not knowledge) that could something go wrong with radios and i finish not getting signal, so i came here looking for some help, if anyone knows something please help ! i will monitor this page so i can get any answer ! Thanks in advance !

ASPViTo said:
if anyone knows something please help ! i will monitor this page so i can get any answer ! Thanks in advance !
Click to expand...
Click to collapse
I've got some questions:
- did you flash Magisk or other tools like a "disable-dm_verity.zip"?
- userdata erased?
- correct boot slot?
Boot into recovery and try to "wipe (user)data". Maybe this will fix the bootloop.

Barb28n said:
Hi, I have looked for this problem, but cannot find any answers. I tried to flash a copy of the official rom on my phone, The bootloader is unlocked but not rooted. It seemed to go well, but now is on a permante startup loop.
I can get into fastboot and recovery, is there any way I can recover from this?
in fastboot it says baseband not found.
Any help will be really appreciated
Click to expand...
Click to collapse
WoKoschekk said:
I've got some questions:
- did you flash Magisk or other tools like a "disable-dm_verity.zip"?
- userdata erased?
- correct boot slot?
Boot into recovery and try to "wipe (user)data". Maybe this will fix the bootloop.
Click to expand...
Click to collapse
Hi bro, and thanks for the attention !
Answers: No, never used magisk. No other tools for root, if is this your question ! Only tool i have used is "Moto Auto Flash Tool v8.2 By Jamesjerss" that i used to unlock bootloader. All other flash process was done was using that list of commands everyone knows:
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash bluetooth BTFM.bin
mfastboot flash dsp dspso.bin
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system_b system_other.img
mfastboot flash oem oem.img
mfastboot flash oem_b oem_other.img
mfastboot flash vendor vendor.img_sparsechunk.0
mfastboot flash vendor vendor.img_sparsechunk.1
mfastboot flash vendor vendor.img_sparsechunk.3
mfastboot flash vendor vendor.img_sparsechunk.4
mfastboot erase carrier
mfastboot erase userdata
mfastboot erase DDR
mfastboot oem fb_mode_clear
mfastboot reboot
About that command "mfastboot erase userdata" you mention,
I found that this command is always used in the list above "user data erased" was used on all tryes of flashsing!
- correct boot slot?
I dont know what you mean about, maybe something like "fix" boot slot, if so, no, i dont know how to do it, if you can provide a link for me to read about, i thank you, if there was a chance of the device stop this infinites restarts.
Boot into recovery and wipe all data, i did every flash attempt, that had fail, as way to recover the device, no sucess so far, phone stills rebooting to unlocked bootloader screen that goes to motorola logo, that goes to briefly entrance of welcome screen, or nor this, restart reboot again, i observed that after various tries it hangs alone and stills a black screen, that only goes out if i long press power button looking a forced shut off, but it doenst stays turned of, this restart process, restart again. Any clues or ideas ?

ASPViTo said:
mfastboot flash vendor vendor.img_sparsechunk.0
mfastboot flash vendor vendor.img_sparsechunk.1
mfastboot flash vendor vendor.img_sparsechunk.3
mfastboot flash vendor vendor.img_sparsechunk.4
Click to expand...
Click to collapse
Did you use exactly the same commands? Apart from the fact that you should count 0,1,2,3 and 4 your firmware has only two vendor.img sparse files.

WoKoschekk said:
Did you use exactly the same commands? Apart from the fact that you count 0,1,2,3 and 4 your firmware has only two vendor.img sparse files.
Click to expand...
Click to collapse
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash bluetooth BTFM.bin
mfastboot flash dsp dspso.bin
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash system system.img_sparsechunk.8
mfastboot flash system system.img_sparsechunk.9
mfastboot flash system system.img_sparsechunk.10
mfastboot flash system system.img_sparsechunk.11
mfastboot flash system system.img_sparsechunk.12
mfastboot flash system_b system_other.img
mfastboot flash oem oem.img
mfastboot flash oem_b oem_other.img
mfastboot flash vendor vendor.img_sparsechunk.0
mfastboot flash vendor vendor.img_sparsechunk.1
mfastboot flash vendor vendor.img_sparsechunk.3
mfastboot flash vendor vendor.img_sparsechunk.4
mfastboot flash vendor vendor.img_sparsechunk.5
mfastboot flash vendor vendor.img_sparsechunk.6
mfastboot flash vendor vendor.img_sparsechunk.7
mfastboot flash vendor vendor.img_sparsechunk.8
mfastboot flash vendor vendor.img_sparsechunk.9
mfastboot flash vendor vendor.img_sparsechunk.10
mfastboot flash vendor vendor.img_sparsechunk.11
mfastboot flash vendor vendor.img_sparsechunk.12
mfastboot erase carrier
mfastboot erase userdata
mfastboot erase DDR
mfastboot oem fb_mode_clear
mfastboot reboot
used this one, something that can improved ?

ASPViTo said:
used this one, something that can improved ?
Click to expand...
Click to collapse
yes, don't use it!
Where did you get the firmware from?
---------- Post added at 11:00 PM ---------- Previous post was at 10:44 PM ----------
Every single command applies to the corresponding file within the firmware.zip. The first command list you posted is the correct one but those two lines vendor.img...3+4 are useless because the files don't exist and cannot be flashed. Delete them and try again.