Database Users

[Q] Bootloop on my sgh-i337m with rom stock (Telcel)

Hello to all the community ..
I'm desperate with my cell phone, I have a galaxy s4 (sgh-I337m) and stopped working today ..
I had the cell phone connected to the charger, when the battery finished charging disconnect the cable and cell phone was shut down automatically.
Try to turn on the phone again, but I get into a bootloop, samsuns logo appears and restarts again .. :crying:
I searched a lot about the problem, all posts recommend entering the recovery and make the respective wipes, but in my case I can not do that, the phone does not go into recovery mode.
The download mode works perfectly.
With odin flashie the last official firmware for my cell phone, the installation is correct and odin did not mark any error, but the phone still with the same problem again and can not enter the recovery mode, but can enter download mode .. .
Also try installing a custom recovery, but again can not go into recovery mode.
Any solution for this?
PD: Sorry for my English ..

Well I'm not sure if you've tried these yet but I'll give it a shot. If you're on 4.2 / 4.2.2 I would look at this thread. If you're on 4.3 I'd look at this thread. It should resolve your bootloop / brick issues from occuring in the future if it ever happens again. Hope this helped you out somewhat.

Rytiou said:
Well I'm not sure if you've tried these yet but I'll give it a shot. If you're on 4.2 / 4.2.2 I would look at this thread. If you're on 4.3 I'd look at this thread. It should resolve your bootloop / brick issues from occuring in the future if it ever happens again. Hope this helped you out somewhat.
Click to expand...
Click to collapse
He's using a Canadian S4, not AT&T.
lince_0011 said:
Hello to all the community ..
I'm desperate with my cell phone, I have a galaxy s4 (sgh-I337m) and stopped working today ..
I had the cell phone connected to the charger, when the battery finished charging disconnect the cable and cell phone was shut down automatically.
Try to turn on the phone again, but I get into a bootloop, samsuns logo appears and restarts again .. :crying:
I searched a lot about the problem, all posts recommend entering the recovery and make the respective wipes, but in my case I can not do that, the phone does not go into recovery mode.
The download mode works perfectly.
With odin flashie the last official firmware for my cell phone, the installation is correct and odin did not mark any error, but the phone still with the same problem again and can not enter the recovery mode, but can enter download mode .. .
Also try installing a custom recovery, but again can not go into recovery mode.
Any solution for this?
PD: Sorry for my English ..
Click to expand...
Click to collapse
It does seem like you've tried everything. However, try this: unplug your phone and try to enter recovery mode by pressing the power button and volume up button simultaneously until you see "Booting recovery..." in blue at the top left when the screen turns on. Once you see that, release the buttons IMMEDIATELY. Sometimes the phone reboots in normal mode if you try to boot into recovery mode with the phone plugged in.

Thanks for responding.
My cell phone can not enter the recovery.
Booting recovery appears blue, but the phone rebooted again.
What else can I try to fix the error?

Please i need help..
I don't know what else can do

lince_0011 said:
Thanks for responding.
My cell phone can not enter the recovery.
Booting recovery appears blue, but the phone rebooted again.
What else can I try to fix the error?
Click to expand...
Click to collapse
ill help. one sec
edit
I also have gs4 I337m. important to note that flashing a custom recovery will trip knox, and void the warranty. when you bootbinto download mode, look for knox lines. good is 0x0, warranty void is 0x1.
download jellybean 4.3 from Samsung-updates.com. be sure to use the region code for your carrier.
perform a factory wipe before starting via stock recovery. use odin and make sure to copy any .ini files included in the stock firmware to your odin folder before flashing. this is important step, if.ini file exists. overwrite if you have another ini file from a previous package already in odin.
use pda button to browse to extracted package. img file and be sure to tick *only* auto reboot and f reset flags.
flash. once successful, boot back into stock recovery and perform another factory reset. this is important to clear any left over munged up sys and usr data.
if all of this still fails, use kies3 and the emergency recovery option. wizard based and will also flash back to factory if odin isnt writing. make sure you have the latest samsung drivers before starting, and make sure you use another usb cable other than the one you've been bad flashing with. use another computer if possible, or at least another usb port to rule out bad cable/usb port.
barring all of that, you can use an unbrick package. i have the files to load via adt if needed. i just ran the script to produce the unbrick files, script isnt mine, from another xda dev.
of you arent comfortable using adt, then find your local best buy, they will repair for free most cases, small nominal fee for tripped knox flags or other carriers.
message me for the unbrick files if you need them. via pm. i wont dump them here.
Sent from my SGH-I337M

azuziel said:
ill help. one sec
Sent from my SGH-I337M
Click to expand...
Click to collapse
ok am waiting

ping, see edit
Sent from my SGH-I337M
---------- Post added at 11:07 PM ---------- Previous post was at 11:04 PM ----------
oh, and remove kies when flashing with odin. i would uninstall entirely, and also remove the usb drivers, and install latest from Samsung/attaching phone after uninstall from device manager. if u have questions, just ask. kies will interfere with odin, its happened to me.
Sent from my SGH-I337M

pregunta
lince_0011 said:
ok am waiting
Click to expand...
Click to collapse
Que tal Lince soy de chihuahua tambien y tengo el mismo problema, vi en htcmania que lograste solucionarlo que te paso ahora?

Need Help!! my sm-n9005 can't access to recovery and bootloop with 2 vibrations

Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.

rodyrach said:
Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.
Click to expand...
Click to collapse
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?

devilsdouble said:
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?
Click to expand...
Click to collapse
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen

rodyrach said:
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen
Click to expand...
Click to collapse
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.

devilsdouble said:
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.
Click to expand...
Click to collapse
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.

rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817

rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
hi, your problems are resolved?

devilsdouble said:
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817
Click to expand...
Click to collapse
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.

Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.

rodyrach said:
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.
Click to expand...
Click to collapse
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging

cryostasis25 said:
Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.
Click to expand...
Click to collapse
Hi i have already use pit file with stock rom via odin. same result. bootloop at the logo.

rodyrach said:
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging
Click to expand...
Click to collapse
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.

devilsdouble said:
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.
Click to expand...
Click to collapse
My phone dont show up on ADB.

rodyrach said:
My phone dont show up on ADB.
Click to expand...
Click to collapse
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.

devilsdouble said:
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.
Click to expand...
Click to collapse
My problem not solved

rodyrach said:
My problem not solved
Click to expand...
Click to collapse
Flash official lollipop poland done! still bootloop at "samsung galaxy note 3 sm-n9005".
can't access to recovery mode but download mode still working!
before to sleep i left the charger connected to the phone still bootloop until the morning and BANG i waked up saw lollipop samsung logo and blue led!
screen stucked at lollipop samsung logo!
i turned off the phone left in charge ( normal charge with animation in green battery, thing that did not before because as soon as I connected the charger to the phone it tried to boot and reboot all time after e few seconds with 2 vibrations) and gone to work.
go back home battery charged at 100%, tried to boot in recovery mode and it working!
i performed a wipe data factory reset and wipe cache partition and BANG my note 3 booted normally.
done a few hours and it works very well.
Thanks to all for your supports.
Really weird i don't understand whats happened during the night.
But im so glad .

How to fix a galaxy j1 SM-j100h hard brick

Hi, i want to fix a phone of my friend by flashing it with odin, but things go wrong, the phone after failing wont start or respond to any button, i dont know what to do, please any help would be appreciated
Samsung Galaxy J1 SM-J100H
Edit:
Thanks xEmre66 for your reply, unfortunately no, i think i break the boot image, the phone wont boot on download mode even if i use 300k jig, i think the only solution is to use an sd card filled with the boot image, but i dont find in website a solution like that.

I tryed many solution but no one work, please if someone have the some problem tell me.

Can you get into the DownloadMode? (ODIN MODE)???
Sent from my SM-J100H using XDA-Developers mobile app
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
I have this phone but it is not my main phone but maybe I can help you.
Sent from my SM-J100H using XDA-Developers mobile app

i'm working on this problem..
i resolved,
share there

OSKCHAST said:
i resolved,
share there
Click to expand...
Click to collapse
Please can you share the solution ?, i cant fix the phone.

same problem here
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???

caseres84 said:
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
Click to expand...
Click to collapse
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.

xEmre66 said:
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
Click to expand...
Click to collapse
same in here. I flash original rom from sam mobile site and my samsung sm-j100h is bricked now. i flash using odin and everthing was ok and it was pass. but nothing happend later on, screen remains black and I don't know what to do.
or atleast tell me can I get somehow all data stored on phone, if yes how to do it

guys still nothing???
same problem guys i bricked the phone 2 days ago with the original firmware from sam mobile u.u i put my samusung j1 in download mode and with odin i done the reflash odin it was green and said me passed but then when i tried to turn on the phone nothing happened my phone is died hard bricked is there a guys something to do to repair him?

i got the same problem..
the phone was completely DEAD after i followed all the instructions here => https://www.youtube.com/watch?v=1T9fxno2s68
Please somebody help us..
Here's my thread => http://forum.xda-developers.com/android/help/help-sm-j100h-dead-power-flash-t3511894
Thank you very much..

im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance

Gal J1 of sadness.... but still hoping
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:

Chrisjopett said:
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Click to expand...
Click to collapse
PM me pls and tell me how you flashed it etc.

Help
I have same problem,hard brick.Can anyone help?

somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:

kkq29 said:
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
Click to expand...
Click to collapse
Can you get into Odin Mode? If yes, flash the stock firmware of your region (here is a fast server which provides very fast downloads: fw.updato.com) If no, then you should change your battery as you're saying "it came from my battery" and try the first step again.
If it doesn't help as expected, then your phone is hard bricked and can't be repaired at all. The only solution would be changing the motherboard, but I would not waste my money on a low-end device motherboard and I would directly buy a new phone. :/
Regards,
xEmre66

If I am correct...
Then SM-J110H have Spreadtrum SC7727S
Here is Pinout for Direct eMMC...
https://postimg.cc/image/ul680l5jv/
This Pinout seems also to work with:
Code:
SM-G318HZ
SM-Z130H
I have leaked SM-Z130H PDF... where Instruction is inside to repair with tweezer... USB cable + Spreadtrum Tool:
Code:
[B]ResearchDownload[/B]
In theory something similar should be possible with SM-J110H...
I have at the moment only 1 problem... to create PAC file...
No idea from where I can get:
Code:
FDL1
FDL2
Best Regards
Edit 1.
Sorry, seems I was drunken...
It is sooo hard to find Posts or Threads about SM-J110H...
But it seems SM-J100H also Spreadtrum device...

xEmre66 said:
PM me pls and tell me how you flashed it etc.
Click to expand...
Click to collapse
PM me too please
My teacher phone has a same problem, hehehe.

same problem here. my phone got stuck up with samsung logo then i just dowloaded a firmware on sammobile and i flash it via odin at first it passed then my phone did'nt turn on anymore.

J100H / DD Finding Deadboot solution
Hi ... guys me too having this sort of problem and i found bad about samsung using 32bit - Spreadtrum SC8830A EMMC chipset here
Fix solution Not Found still! if i done i will tell you!
on = SM-J100H/DD --- corp =samsung yateley, uk
ok friend iam searching for Solution for 3days bt i found none= with a clue
It is J100H on serial port= SPRD U2S Daig (ComXX) usb says= SPRD COM Emumerator
this means - all sprd flashing been done on this 2 port only - in Miracle Box it says -
Scanning USB Serial port...
SU2Serial Port: COM64
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot19...
>>BootLoad Error. ID: 1
so my option is if we build a sprdp.bin and flash in AP(PDA) it will boot to Download mode
and dont ask me where is that file i dont no - if any one can provide a real backup pit.pit file
via phone to me i can find something and let u know it. Only from a alive phone J100H/DD
plz friends i need help any dumps or pit. and if any one has a alive J100H/DD please tell me.!
so i can get some help from u --If you wish to help

Recovery is not Seandroid Enforcing Odin isn’t detecting my phone, any suggestions?

Recovery is not Seandroid Enforcing Odin isn’t detecting my phone, any suggestions?
I successfully rooted my phone and was trying to install the exposed framework and i guess downloaded the wrong one. When i flashed it i ended up getting into boot loop. I am on N910F with the 2 Network.
I have tried factory resetting with the caches but to no avail. The only other option i found was Odin, the problem is Odin is not detecting my phone when in recovery mode but seems to have no problem coming blue when starting up giving the 3 logo startup which just goes when it start looping again. I have tried 2 computers, a different cable although old and all my USB ports and the same thing keeps happening. I have already reinstalled Samsung USB Drivers times. I am wondering if they are any others.
Please Help

Note44 said:
I successfully rooted my phone and was trying to install the exposed framework and i guess downloaded the wrong one. When i flashed it i ended up getting into boot loop. I am on N910F with the 2 Network.
I have tried factory resetting with the caches but to no avail. The only other option i found was Odin, the problem is Odin is not detecting my phone when in recovery mode but seems to have no problem coming blue when starting up giving the 3 logo startup which just goes when it start looping again. I have tried 2 computers, a different cable although old and all my USB ports and the same thing keeps happening. I have already reinstalled Samsung USB Drivers times. I am wondering if they are any others.
Please Help
Click to expand...
Click to collapse
are u sure ur phones usb port is working? did u connected another phone to the pc?

Note44 said:
I successfully rooted my phone and was trying to install the exposed framework and i guess downloaded the wrong one. When i flashed it i ended up getting into boot loop. I am on N910F with the 2 Network.
I have tried factory resetting with the caches but to no avail. The only other option i found was Odin, the problem is Odin is not detecting my phone when in recovery mode but seems to have no problem coming blue when starting up giving the 3 logo startup which just goes when it start looping again. I have tried 2 computers, a different cable although old and all my USB ports and the same thing keeps happening. I have already reinstalled Samsung USB Drivers times. I am wondering if they are any others.
Please Help
Click to expand...
Click to collapse
Are you connecting phone to Odin in Recovery mode or you mean to say download mode. You should put phone in download mode For connecting to Odin.

Ram121 said:
Are you connecting phone to Odin in Recovery mode or you mean to say download mode. You should put phone in download mode For connecting to Odin.
Click to expand...
Click to collapse
Ram121 said:
Are you connecting phone to Odin in Recovery mode or you mean to say download mode. You should put phone in download mode For connecting to Odin.
Click to expand...
Click to collapse
Thank you,
I just figured that out from some genius from Reddit Not 4 Thread. I guess the guy in the YouTube tutorial accidentally said "hold volume up" and so did everyone else I happened to come across which ended up wasting me a lot of time.
That was so lucky, because I really would have done some crazy stuff I didn't know about.
Thank you so much for taking the time to reply. Maybe I should contact the guy from YouTube to add an annotation or something.

shahram Ali said:
are u sure ur phones usb port is working? did u connected another phone to the pc?
Click to expand...
Click to collapse
Yes it was, the problem was I was given a bad tutorial and told to hold "volume up" to go into TWRP recovery instead of "Volume Down" into downloader.
Everything is working great now and my phone is working again.
Thank you for taking the time to reply. It's genuine people like you that make the internet great!

Note44 said:
Yes it was, the problem was I was given a bad tutorial and told to hold "volume up" to go into TWRP recovery instead of "Volume Down" into downloader.
Everything is working great now and my phone is working again.
Thank you for taking the time to reply. It's genuine people like you that make the internet great!
Click to expand...
Click to collapse
congratulations bro im happy cause ur phone fixed :victory:

frp locked & usb not recognized

somedays ago, i rooted my samsung galaxy grand prime (sm-g531f). which is processed by flash twrp via odin, & then flash supersu via twrp recovery.
after root, i erroneously add google account, so that frp lock was on. and top of that when i go to recovery mode its shown "custom binary blocked by frp".
so, solve this problem (bcoz i already solve this many time on many phone), i go to download mode, and i try to connect my phone via usb cable in pc, but everytime it say "usb device not recognized", but when my phone was switched on (before locked by frp), it also not recognized by usb but it was charging..
so, now:
*i cant switch on my phone
*cant go to recovery mode
*cant connect by usb cable
*i tried on many usb cables
*two laptops
*install/unistall samsung mobile drivers many times
but, nothing wasnt solved my problem..
if anyone also faced this problem, and solved this, please share your valuable process in this thread.. and help me...
Update-1: now i even change my phone's usb connector if anything could happen, but again my bad luck.. nothing happen, means usb not recognized..
Update-2: sorry i was offline or forgot to update my condition. I was tried to fix it via many mobile hardware technichian. And at last, i fixed my problem by change my whole motherboard. Bcoz, the all technichian told me that, it was my phone's cpu which have problem. For that, it couldn't recognize by any pc.

Do u have another samsung phone? If yes then try this connect that phone to your laptop or pc let it be recognised anf when thatd done removed the port from that phone and immediately connect your phone in download mode. This worked for me. If that doesnt work tell me ill look for another solution

waleeds1 said:
Do u have another samsung phone? If yes then try this connect that phone to your laptop or pc let it be recognised anf when thatd done removed the port from that phone and immediately connect your phone in download mode. This worked for me. If that doesnt work tell me ill look for another solution
Click to expand...
Click to collapse
bad luck, its not worked for me...

aamnahid said:
bad luck, its not worked for me...
Click to expand...
Click to collapse
This might be stupid but try it worked for many people. Boot your phone in download mode connect it to your pc open odin and without removing the cable remove the battery of your phone. Your screen wont go off , and if odin recognizes your phone put the battery back. It might not work but still give it a try

waleeds1 said:
This might be stupid but try it worked for many people. Boot your phone in download mode connect it to your pc open odin and without removing the cable remove the battery of your phone. Your screen wont go off , and if odin recognizes your phone put the battery back. It might not work but still give it a try
Click to expand...
Click to collapse
this was also not worked...

I have the same problem and my battery is built in unfortunately any suggestions please

Abdul.82 said:
I have the same problem and my battery is built in unfortunately any suggestions please
Click to expand...
Click to collapse
I'm having this exact problem also. I've downloaded usb drivers for Samsung, i've downloaded kies, ive tried 5 different computers and 4 different cords. No computer even recognizes it (but it does charge) and only one computer says couldn't recognize usb device.
Currently i'm stuck in the google loop of trying to login with an ID that you've previously used on this device and when i enter in the correct info it just keeps looping back to that screen, so i cant even get into the phone to debug or choose MTP connection etc.
The only reason i pulled out the grand prime and started working on it, was i rooted my s6 and s5 and i wanted to keep learning so i pulled out the grand prime and realized its powerful enough to run updated software so it doesn't have to be a paperweight anymore.

Me too I have same problem bro plz help me

FIX for FRP LOCK USB Not Working
The only way to fix that I have gotten to work is to download the stock firmware and Flash using ODIN. I had to try a few different cords but it will eventually work!! Keep trying!! I did the BL the AP the CSC and the CP, went into download mode and ONLY STOCK FIRMWARE works ok!
---------- Post added at 09:51 PM ---------- Previous post was at 09:49 PM ----------
DionWhite33 said:
The only way to fix that I have gotten to work is to download the stock firmware and Flash using ODIN. I had to try a few different cords but it will eventually work!! Keep trying!! I did the BL the AP the CSC and the CP, went into download mode and ONLY STOCK FIRMWARE works ok!
Click to expand...
Click to collapse
it took me a few minutes to figure this out after flashing Root with CF auto didnt work nor did TWRP. So I tried the Samsung Smartswitch and no luck..

hi ,did you find a solution to the frp lock and usb not recognising?