Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.
rodyrach said:
Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.
Click to expand...
Click to collapse
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?
devilsdouble said:
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?
Click to expand...
Click to collapse
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen
rodyrach said:
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen
Click to expand...
Click to collapse
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.
devilsdouble said:
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.
Click to expand...
Click to collapse
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817
rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
hi, your problems are resolved?
devilsdouble said:
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817
Click to expand...
Click to collapse
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.
Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.
rodyrach said:
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.
Click to expand...
Click to collapse
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging
cryostasis25 said:
Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.
Click to expand...
Click to collapse
Hi i have already use pit file with stock rom via odin. same result. bootloop at the logo.
rodyrach said:
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging
Click to expand...
Click to collapse
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.
devilsdouble said:
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.
Click to expand...
Click to collapse
My phone dont show up on ADB.
rodyrach said:
My phone dont show up on ADB.
Click to expand...
Click to collapse
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.
devilsdouble said:
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.
Click to expand...
Click to collapse
My problem not solved
rodyrach said:
My problem not solved
Click to expand...
Click to collapse
Flash official lollipop poland done! still bootloop at "samsung galaxy note 3 sm-n9005".
can't access to recovery mode but download mode still working!
before to sleep i left the charger connected to the phone still bootloop until the morning and BANG i waked up saw lollipop samsung logo and blue led!
screen stucked at lollipop samsung logo!
i turned off the phone left in charge ( normal charge with animation in green battery, thing that did not before because as soon as I connected the charger to the phone it tried to boot and reboot all time after e few seconds with 2 vibrations) and gone to work.
go back home battery charged at 100%, tried to boot in recovery mode and it working!
i performed a wipe data factory reset and wipe cache partition and BANG my note 3 booted normally.
done a few hours and it works very well.
Thanks to all for your supports.
Really weird i don't understand whats happened during the night.
But im so glad .
Related
Hi guys, I'm gonna tell you what happened with my S4 to see if you can help me.
I got a MetroPCS Galaxy S4 (SGH-M919N) then I went to a tech and unlocked it. After 2 days the screen started blinking in pink color and I decided to flash it with a stock ROM from T-Mobile (SGH-M919-TMB-M919UVUAMDL-1366964131) using ODIN. Everything was great, in a couple of days the screen went kinda black (No brightness at all) I could barely see it. In this state with the phone turned off and tried to plug in to the PC or charge it and started blinking in green color. I decided once again to flash it with the stock ROM mentioned above but the phone won't enter in recovery or download mode after that I tried to flash it with the CyanogenMOD Installer......everything was OK but it stuck in about 75%, left the phone connected for 20min aprox and nothing happened. I unplugged it and tried to turn it on (It vibrates but I get no startup sound, logo, boot, anything!) ODIN doesn't recognized anymore, can't enter in recovery or download.
I tried to reboot download with ADB to flash it with ODIN but usb debugging is not enabled and ADB commands doesn't work.
I don't know what to do with my S4, I hope you guys can help me. I'm not in the US so I can't return it for replacement.
I hope to hear from you soon. THANKS IN ADVANCE.
chure63 said:
Hi guys, I'm gonna tell you what happened with my S4 to see if you can help me.
I got a MetroPCS Galaxy S4 (SGH-M919N) then I went to a tech and unlocked it. After 2 days the screen started blinking in pink color and I decided to flash it with a stock ROM from T-Mobile (SGH-M919-TMB-M919UVUAMDL-1366964131) using ODIN. Everything was great, in a couple of days the screen went kinda black (No brightness at all) I could barely see it. In this state with the phone turned off and tried to plug in to the PC or charge it and started blinking in green color. I decided once again to flash it with the stock ROM mentioned above but the phone won't enter in recovery or download mode after that I tried to flash it with the CyanogenMOD Installer......everything was OK but it stuck in about 75%, left the phone connected for 20min aprox and nothing happened. I unplugged it and tried to turn it on (It vibrates but I get no startup sound, logo, boot, anything!) ODIN doesn't recognized anymore, can't enter in recovery or download.
I tried to reboot download with ADB to flash it with ODIN but usb debugging is not enabled and ADB commands doesn't work.
I don't know what to do with my S4, I hope you guys can help me. I'm not in the US so I can't return it for replacement.
I hope to hear from you soon. THANKS IN ADVANCE.
Click to expand...
Click to collapse
Is the battery working ok? Does the LED go red when charger is plugged in as normal?
What happens when you try to boot to recovery?
If your screen start blinking pink and after that turning black, why do assume it's a software problem? No rom would cause that. It's clearly a hardware failure.
RossFixxed said:
Is the battery working ok? Does the LED go red when charger is plugged in as normal?
What happens when you try to boot to recovery?
Click to expand...
Click to collapse
The battery is OK, I tested it already with another phone. The LED doesn't turn on when the charger is plugged in. When I try to enter to recovery it vibrates but nothing else happens (Black Screen).
Lennyz1988 said:
If your screen start blinking pink and after that turning black, why do assume it's a software problem? No rom would cause that. It's clearly a hardware failure.
Click to expand...
Click to collapse
The screen would cause no sound, no LED light, no download or recovery mode, etc..?
Wrong section...
Sent from my GT-I9500 using Tapatalk 4 - Hassan K. Malik
HassanM said:
Wrong section...
Sent from my GT-I9500 using Tapatalk 4 - Hassan K. Malik
Click to expand...
Click to collapse
Where should I post this? Thank you.
chure63 said:
Where should I post this? Thank you.
Click to expand...
Click to collapse
mabye try to use Odin if you can go to Download mode, try to install Android 4.3 with repartition (pit file)... Did you try? Can you go somehow to CWM? If yes, try to format EVERYTHING as possible - system, data etc. than try again method via Odin...
erikasnoske said:
mabye try to use Odin if you can go to Download mode, try to install Android 4.3 with repartition (pit file)... Did you try? Can you go somehow to CWM? If yes, try to format EVERYTHING as possible - system, data etc. than try again method via Odin...
Click to expand...
Click to collapse
I can't get into download or recovery mode.
chure63 said:
I can't get into download or recovery mode.
Click to expand...
Click to collapse
oh god, I didn't have this experience, sorry, I can't help you at all then
Jtag
Jtag?
jd1639 said:
Jtag
Click to expand...
Click to collapse
Hiya I found as a bit of a n00b Jtag painful as a senior member would there be a guide that we could learn from? I wasn't able to find one.:fingers-crossed:
Service center is better idea, since they can't go to download mode to see your phone stil got warranty or not.. just say phone dead ... while In pocket automatically
Generated by Galaxy S4® Octa-Core™ Black-Mambo , Signature not required.©
jd1639 said:
Jtag
Click to expand...
Click to collapse
I don't know much about it. Which box will be helpful to debrick it? Thanks.
chure63 said:
I don't know much about it. Which box will be helpful to debrick it? Thanks.
Click to expand...
Click to collapse
Google mobiletechvideos
Sent from my Nexus 5 using xda app-developers app
95mediatech said:
Service center is better idea, since they can't go to download mode to see your phone stil got warranty or not.. just say phone dead ... while In pocket automatically
Generated by Galaxy S4® Octa-Core™ Black-Mambo , Signature not required.©
Click to expand...
Click to collapse
I'm not in the US....
chure63 said:
I'm not in the US....
Click to expand...
Click to collapse
You don't have to be in the US, it's just going to cost you more in shipping. Maybe you can find someone in your country that can jtag. Try some of the local phone repair shops.
Sent from my Nexus 5 using xda app-developers app
Have you tryed it?
http://forum.xda-developers.com/showthread.php?t=2265477
At the bottom there are some information "how to revive bricked device". Have you tryed it?
Hello, I am trying to get back to stock but for some reason my phone won't boot in download more anymore. It stucks at this step -> see attached photo
Are you connected to a computer or charging we with the cable? Just to cross off one thing.
Sent from my LG-D802 using Tapatalk
waz675 said:
Are you connected to a computer or charging we with the cable? Just to cross off one thing.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
We are in the same situation... if someone can help us
http://forum.xda-developers.com/show....php?t=2710034
http://forum.xda-developers.com/showthread.php?t=2706225
Thanks
No, the phone was connected to the computer
S0wL said:
No, the phone was connected to the computer
Click to expand...
Click to collapse
if you can go to recovery (custom or stock)
it can help you
Code:
http://forum.xda-developers.com/showthread.php?t=2694530
S0wL said:
No, the phone was connected to the computer
Click to expand...
Click to collapse
Did you install any recovery module like CWM or TWRP on the mobile. I faced the same situation and I was able to recover my phone using TWRD and ADB consoles. I will be able to help you if you have installed any one of these.
Thanks.
ravi.ameer said:
Did you install any recovery module like CWM or TWRP on the mobile. I faced the same situation and I was able to recover my phone using TWRD and ADB consoles. I will be able to help you if you have installed any one of these.
Thanks.
Click to expand...
Click to collapse
I'm in the same situation with TWRP :good:
profesy said:
I'm in the same situation with TWRP :good:
Click to expand...
Click to collapse
Only one question,
Do you have any ROM installed currently or stuck without any rom. Like boot loop and secure boot issue etc.
If you have TWRP at least installed on your device, you may use "adb push xxxx.zip /sdcard/xxxx.zip" command if the device is discoverable in "adb discover" command. You may follow the guide here "http://www.droidviews.com/android-4-4-2-kitkat-rom-on-lg-g2-d802-install-twrp/"
If you are able to boot in X rom you may use this guide to shine yourself in stock rom
"http://forum.xda-developers.com/showthread.php?t=2432476&highlight=remove+root+status"
Thanks!
ravi.ameer said:
Only one question,
Do you have any ROM installed currently or stuck without any rom. Like boot loop and secure boot issue etc.
If you have TWRP at least installed on your device, you may use "adb push xxxx.zip /sdcard/xxxx.zip" command if the device is discoverable in "adb discover" command. You may follow the guide here "http://www.droidviews.com/android-4-4-2-kitkat-rom-on-lg-g2-d802-install-twrp/"
If you are able to boot in X rom you may use this guide to shine yourself in stock rom
"http://forum.xda-developers.com/showthread.php?t=2432476&highlight=remove+root+status"
Thanks!
Click to expand...
Click to collapse
I have recovery and a booting rom, the smartphone it's all ok but don't go in download mode (see image above), and i can't see it with the pc in usb, i can't use this guide because i can't enter in the dowload mode and the pc both donwload mode and normal boot don't see the smartphone
S0wL said:
Hello, I am trying to get back to stock but for some reason my phone won't boot in download more anymore. It stucks at this step -> see attached photo
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?p=51693321#post51693321
I got the same problem and got the download mode after that. Good luck !
profesy said:
I have recovery and a booting rom, the smartphone it's all ok but don't go in download mode (see image above), and i can't see it with the pc in usb, i can't use this guide because i can't enter in the dowload mode and the pc both donwload mode and normal boot don't see the smartphone
Click to expand...
Click to collapse
Firstly you may not go do download mode for flashing factory rom. You can do the same even from recovery. However, the guide in http://forum.xda-developers.com/showthread.php?p=51693321#post51693321 seems working for many. You may give that a try.
Thanks.
Sangoku91 said:
Try this http://forum.xda-developers.com/showthread.php?p=51693321#post51693321
I got the same problem and got the download mode after that. Good luck !
Click to expand...
Click to collapse
Thx to all man, this fix the problem. Many many thx to all
Worked ! Thanks, finally got to stock android.
Hi.I can not go to downloading mod on my lg g2.I tried using v+ and connecting to pc.It goes to charging mod and nothing happen.
As you said I went to recovery mod but there is not any advance selection.
plz help me
did donwload mode work ?
zaker.khafan1 said:
Hi.I can not go to downloading mod on my lg g2.I tried using v+ and connecting to pc.It goes to charging mod and nothing happen.
As you said I went to recovery mod but there is not any advance selection.
plz help me
Click to expand...
Click to collapse
Did u get it work?
I have a similar problem, my sprint G2 says download mode when vol up+ cable, but doesn't go all the way into download mode just the initial screen. And normal boot results in being stuck on LG logo forever.
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
rajukhadka19782 said:
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
Click to expand...
Click to collapse
You must use ODIN
go to download mode then flash your rom
rajukhadka19782 said:
Hi everyone, I'm new here. I have a problem regarding my galaxy grand prime sm-g530h. I have rooted that device. In the process of deleting system apps may be Ive deleted som other systems. When I reboot my phone it stucks on its name . Ive reset my factory data nd cache too. Now im anable to connect wiht samsung kies for emergency recovery. Because its not possible to connect samsung kies without enabling usb debug. I have searched many threads regarding my phones problem but didnt found anything. Is there anyone to help me out this situation? Suggestions will be appreciated.
Click to expand...
Click to collapse
i have same problem after i install app from google play try to flash rom can,t find 1 that work
plz help.
you need to use odin to flash the stock firmware back going into download mode and for rom just visit - http://www.sammobile.com/ and download firmware from there just see you model and select you country and download latest stock rom and flash it or else tell me your model number and country i will provide you link
AmGaD-SaLaH said:
You must use ODIN
go to download mode then flash your rom
Click to expand...
Click to collapse
Thanks dude for the suggestion.
me 2
Me 2, I want to unbrick it how to download my firmware?
Galaxy Grand Prime SM-G530/H/DV is Not accepting ODIN connection
Galaxy Grand Prime SM-G530/H/DV
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
maq66 said:
Galaxy Grand Prime SM-G530/H/DV
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
Click to expand...
Click to collapse
Seems like the EFS partition is broken (IMEI Invalid)
If You don't have any backups done by custom recovery, well... You're probably done.
I am having a similar problem. After enabling KNOX, which I thought was just another antivirus, my phone rebooted, and just got stuck. It would go to the boot page, with the name, and then it would act like it was gonna go to my home screen, but the screen would go black and it would start over. I cleared the cache and factory wiped it, but still no luck. I didn't enable usb debugging, and from what I know there is no way to enable it. I need it to use odin to flash a rom and start over. any suggestions?
dineshjumani said:
you need to use odin to flash the stock firmware back going into download mode and for rom just visit - http://www.sammobile.com/ and download firmware from there just see you model and select you country and download latest stock rom and flash it or else tell me your model number and country i will provide you link
Click to expand...
Click to collapse
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
talvigi said:
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
Click to expand...
Click to collapse
I'm with the same problem! All solutions need to go to download or recovery mode, but I can't turn on my phone and Odin can't catch it! Please, could somebody help me?
Thanks!
lucas13garcia said:
I'm with the same problem! All solutions need to go to download or recovery mode, but I can't turn on my phone and Odin can't catch it! Please, could somebody help me?
Thanks!
Click to expand...
Click to collapse
Does your device start at all or not? if it starts tell me what do you see? Is the battery charged, anden have you tried Odin 1.87, and have you tired to flash repair firmware 4.4.4, please Try it and make sure to only flash BL file first.
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Does your device start at all or not? if it starts tell me what do you see? Is the battery charged, anden have you tried Odin 1.87, and have you tired to flash repair firmware 4.4.4, please Try it and make sure to only flash BL file first.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Hey, thank you for the help!
It starts and it doesn't! With the battery, after I try to turn on, it keeps blinking repeatedly and stops only if I remove the battery. And my issue with any fix that I try to flash is that the computer doesn't recognize, probably cuz the blinking blue light is just a random light and not the phone actually trying to turn on... so Odin, for example, doesn't catch any device!
Is there any way to make the computer recognize it? I already tried some usb drivers, but nothing so far... BTW, I have a windows 10.
Thanks!
lucas13garcia said:
Hey, thank you for the help!
It starts and it doesn't! With the battery, after I try to turn on, it keeps blinking repeatedly and stops only if I remove the battery. And my issue with any fix that I try to flash is that the computer doesn't recognize, probably cuz the blinking blue light is just a random light and not the phone actually trying to turn on... so Odin, for example, doesn't catch any device!
Is there any way to make the computer recognize it? I already tried some usb drivers, but nothing so far... BTW, I have a windows 10.
Thanks!
Click to expand...
Click to collapse
Well Windows 10 64bit has been creating problems for many many people in the forum and I have seen people running vm and win 7 for the best results. And something very important I must say is that, most of the new computers do have USB 2.0 ports but they are limited in number, so you should find one on ur PC, to us it specifically for phone tweaking softwares. I would suggest you find another PC or laptop around,
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Hay, @rajukhadka19782: Man, can you please tell me, whether you found a way to flash firmware with in a dead Samsung Galaxy Grand Prime, I mean my device is dead at all, it has no Download mode, no recovery. Just a light black screen and nothing more not even boot loops that could help me.
I need your help please try having some way out there
Click to expand...
Click to collapse
Without recovery or Download mode, you'll need to take it to someone with a black box or jtag.
If you can access a working phone of your same model, you can boot download mode from sd
http://forum.xda-developers.com/grand-prime/development/fix-g530-debrick-img-guide-to-make-t3422115
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
mrunank said:
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
Click to expand...
Click to collapse
What happens when you go to download mode?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
mrunank said:
Guys, I just tried to root my samsung galaxy grand prime but now it is not booting up. it just shows the logo and the screen becomes black after that. also dowload mode is not working. same thing happens when i try to go into download mode
Click to expand...
Click to collapse
Did you try wiping cache and what is your model?
waleeds1 said:
What happens when you go to download mode?
---------- Post added at 06:10 PM ---------- Previous post was at 06:09 PM ----------
Did you try wiping cache and what is your model?
Click to expand...
Click to collapse
My model is SM530H I cannot enter the recovery mode to wipe the cache . When I try to go into the recovery mode, samsung logo flashes and then the screen goes blank. Same thing happens when i try to normally switch on the phone
mrunank said:
My model is SM530H I cannot enter the recovery mode to wipe the cache . When I try to go into the recovery mode, samsung logo flashes and then the screen goes blank. Same thing happens when i try to normally switch on the phone
Click to expand...
Click to collapse
What about download mode? Btw it should not go to logo it should go to recovery after bootimage. You should hold down power home and volume down untill download mode comes or power home and volume up untill recovery menu comes
Recovery is not Seandroid Enforcing Odin isn’t detecting my phone, any suggestions?
I successfully rooted my phone and was trying to install the exposed framework and i guess downloaded the wrong one. When i flashed it i ended up getting into boot loop. I am on N910F with the 2 Network.
I have tried factory resetting with the caches but to no avail. The only other option i found was Odin, the problem is Odin is not detecting my phone when in recovery mode but seems to have no problem coming blue when starting up giving the 3 logo startup which just goes when it start looping again. I have tried 2 computers, a different cable although old and all my USB ports and the same thing keeps happening. I have already reinstalled Samsung USB Drivers times. I am wondering if they are any others.
Please Help
Note44 said:
I successfully rooted my phone and was trying to install the exposed framework and i guess downloaded the wrong one. When i flashed it i ended up getting into boot loop. I am on N910F with the 2 Network.
I have tried factory resetting with the caches but to no avail. The only other option i found was Odin, the problem is Odin is not detecting my phone when in recovery mode but seems to have no problem coming blue when starting up giving the 3 logo startup which just goes when it start looping again. I have tried 2 computers, a different cable although old and all my USB ports and the same thing keeps happening. I have already reinstalled Samsung USB Drivers times. I am wondering if they are any others.
Please Help
Click to expand...
Click to collapse
are u sure ur phones usb port is working? did u connected another phone to the pc?
Note44 said:
I successfully rooted my phone and was trying to install the exposed framework and i guess downloaded the wrong one. When i flashed it i ended up getting into boot loop. I am on N910F with the 2 Network.
I have tried factory resetting with the caches but to no avail. The only other option i found was Odin, the problem is Odin is not detecting my phone when in recovery mode but seems to have no problem coming blue when starting up giving the 3 logo startup which just goes when it start looping again. I have tried 2 computers, a different cable although old and all my USB ports and the same thing keeps happening. I have already reinstalled Samsung USB Drivers times. I am wondering if they are any others.
Please Help
Click to expand...
Click to collapse
Are you connecting phone to Odin in Recovery mode or you mean to say download mode. You should put phone in download mode For connecting to Odin.
Ram121 said:
Are you connecting phone to Odin in Recovery mode or you mean to say download mode. You should put phone in download mode For connecting to Odin.
Click to expand...
Click to collapse
Ram121 said:
Are you connecting phone to Odin in Recovery mode or you mean to say download mode. You should put phone in download mode For connecting to Odin.
Click to expand...
Click to collapse
Thank you,
I just figured that out from some genius from Reddit Not 4 Thread. I guess the guy in the YouTube tutorial accidentally said "hold volume up" and so did everyone else I happened to come across which ended up wasting me a lot of time.
That was so lucky, because I really would have done some crazy stuff I didn't know about.
Thank you so much for taking the time to reply. Maybe I should contact the guy from YouTube to add an annotation or something.
shahram Ali said:
are u sure ur phones usb port is working? did u connected another phone to the pc?
Click to expand...
Click to collapse
Yes it was, the problem was I was given a bad tutorial and told to hold "volume up" to go into TWRP recovery instead of "Volume Down" into downloader.
Everything is working great now and my phone is working again.
Thank you for taking the time to reply. It's genuine people like you that make the internet great!
Note44 said:
Yes it was, the problem was I was given a bad tutorial and told to hold "volume up" to go into TWRP recovery instead of "Volume Down" into downloader.
Everything is working great now and my phone is working again.
Thank you for taking the time to reply. It's genuine people like you that make the internet great!
Click to expand...
Click to collapse
congratulations bro im happy cause ur phone fixed :victory:
so here goes my story. My s10+ end the battery and when I charge it, started bootlooping. I really don't understand why thats happening to me. I tried everything, safe mode reset, hard reset, wipe cache and installing a new firmware, i used three diferentes Odins and dosen't work. I did a lot of questions here and I really appreciate for the help, but this is the end I think, if someone knows what more else can I do it, please tell me.
PS:sorry for the grammar, I'm brazilian guy
Try this link:
naldotech dot com/how-to-unbrick-samsung-galaxy-s10-stuck-in-bootloop/
rubenswing said:
Try this link:
naldotech dot com/how-to-unbrick-samsung-galaxy-s10-stuck-in-bootloop/
Click to expand...
Click to collapse
I already try this itens, but thanks. The ffirmware was my hope, didn't work, I installed the correct one.
Then I guess it's nothing more than an expensive paperweight
rubenswing said:
Then I guess it's nothing more than an expensive paperweight
Click to expand...
Click to collapse
yeah i cant understand how thats happening. dosent make sense.
Did you try re-installing the firmware through smart switch
rubenswing said:
Did you try re-installing the firmware through smart switch
Click to expand...
Click to collapse
this I have not tried. In fact, I didn't even know I could do that. how I do?
Desvtr said:
this I have not tried. In fact, I didn't even know I could do that. how I do?
Click to expand...
Click to collapse
I research for a video and see very easy and very much safe than odin metod. Thank you very much man, i will try and post my result here
Desvtr said:
this I have not tried. In fact, I didn't even know I could do that. how I do?
Click to expand...
Click to collapse
Charge your phone for some time and see if it turns on and if it does go to download mode or emergency recovery screen is download mode too and try the following steps
1. While your phone is on the Emergency Recovery Screen or download mode, connect it to the computer.
2. Open Odin and load all the firmware files. Download the original firmware file
3. You will find that Odin has already detected your phone.
4. The options checked in Odin should be F.Reset.Time and Auto-Reboot.
5. After making all the preparations, click on the “Start” button in Odin.
6. Let the firmware flashing end. Once done, disconnect the phone and let it turn on. You will be out of the Emergency Recovery/Download mode Screen now.
IMP: Download the original firmware file for your phone
Any update on this thread as it might be similar to my issue
Samsung S10 + bootloop ERASE FAIL: READ ONLY
Samsung S10 + SM-F975F/DS IMEI stating Taiwan (Update: Very contradicting information if the phone is Snapdragon OR Exynos) if it even matters to solve the issue I dont know Owner of the above since 2019 without issues; USB debugging mode...
forum.xda-developers.com