Bricked Phone! - Dead - NEED HELP!! - Galaxy S 4 Q&A, Help & Troubleshooting

Hi guys, I'm gonna tell you what happened with my S4 to see if you can help me.
I got a MetroPCS Galaxy S4 (SGH-M919N) then I went to a tech and unlocked it. After 2 days the screen started blinking in pink color and I decided to flash it with a stock ROM from T-Mobile (SGH-M919-TMB-M919UVUAMDL-1366964131) using ODIN. Everything was great, in a couple of days the screen went kinda black (No brightness at all) I could barely see it. In this state with the phone turned off and tried to plug in to the PC or charge it and started blinking in green color. I decided once again to flash it with the stock ROM mentioned above but the phone won't enter in recovery or download mode after that I tried to flash it with the CyanogenMOD Installer......everything was OK but it stuck in about 75%, left the phone connected for 20min aprox and nothing happened. I unplugged it and tried to turn it on (It vibrates but I get no startup sound, logo, boot, anything!) ODIN doesn't recognized anymore, can't enter in recovery or download.
I tried to reboot download with ADB to flash it with ODIN but usb debugging is not enabled and ADB commands doesn't work.
I don't know what to do with my S4, I hope you guys can help me. I'm not in the US so I can't return it for replacement.
I hope to hear from you soon. THANKS IN ADVANCE.

chure63 said:
Hi guys, I'm gonna tell you what happened with my S4 to see if you can help me.
I got a MetroPCS Galaxy S4 (SGH-M919N) then I went to a tech and unlocked it. After 2 days the screen started blinking in pink color and I decided to flash it with a stock ROM from T-Mobile (SGH-M919-TMB-M919UVUAMDL-1366964131) using ODIN. Everything was great, in a couple of days the screen went kinda black (No brightness at all) I could barely see it. In this state with the phone turned off and tried to plug in to the PC or charge it and started blinking in green color. I decided once again to flash it with the stock ROM mentioned above but the phone won't enter in recovery or download mode after that I tried to flash it with the CyanogenMOD Installer......everything was OK but it stuck in about 75%, left the phone connected for 20min aprox and nothing happened. I unplugged it and tried to turn it on (It vibrates but I get no startup sound, logo, boot, anything!) ODIN doesn't recognized anymore, can't enter in recovery or download.
I tried to reboot download with ADB to flash it with ODIN but usb debugging is not enabled and ADB commands doesn't work.
I don't know what to do with my S4, I hope you guys can help me. I'm not in the US so I can't return it for replacement.
I hope to hear from you soon. THANKS IN ADVANCE.
Click to expand...
Click to collapse
Is the battery working ok? Does the LED go red when charger is plugged in as normal?
What happens when you try to boot to recovery?

If your screen start blinking pink and after that turning black, why do assume it's a software problem? No rom would cause that. It's clearly a hardware failure.

RossFixxed said:
Is the battery working ok? Does the LED go red when charger is plugged in as normal?
What happens when you try to boot to recovery?
Click to expand...
Click to collapse
The battery is OK, I tested it already with another phone. The LED doesn't turn on when the charger is plugged in. When I try to enter to recovery it vibrates but nothing else happens (Black Screen).

Lennyz1988 said:
If your screen start blinking pink and after that turning black, why do assume it's a software problem? No rom would cause that. It's clearly a hardware failure.
Click to expand...
Click to collapse
The screen would cause no sound, no LED light, no download or recovery mode, etc..?

Wrong section...
Sent from my GT-I9500 using Tapatalk 4 - Hassan K. Malik

HassanM said:
Wrong section...
Sent from my GT-I9500 using Tapatalk 4 - Hassan K. Malik
Click to expand...
Click to collapse
Where should I post this? Thank you.

chure63 said:
Where should I post this? Thank you.
Click to expand...
Click to collapse
mabye try to use Odin if you can go to Download mode, try to install Android 4.3 with repartition (pit file)... Did you try? Can you go somehow to CWM? If yes, try to format EVERYTHING as possible - system, data etc. than try again method via Odin...

erikasnoske said:
mabye try to use Odin if you can go to Download mode, try to install Android 4.3 with repartition (pit file)... Did you try? Can you go somehow to CWM? If yes, try to format EVERYTHING as possible - system, data etc. than try again method via Odin...
Click to expand...
Click to collapse
I can't get into download or recovery mode.

chure63 said:
I can't get into download or recovery mode.
Click to expand...
Click to collapse
oh god, I didn't have this experience, sorry, I can't help you at all then

Jtag

Jtag?
jd1639 said:
Jtag
Click to expand...
Click to collapse
Hiya I found as a bit of a n00b Jtag painful as a senior member would there be a guide that we could learn from? I wasn't able to find one.:fingers-crossed:

Service center is better idea, since they can't go to download mode to see your phone stil got warranty or not.. just say phone dead ... while In pocket automatically
Generated by Galaxy S4® Octa-Core™ Black-Mambo , Signature not required.©

jd1639 said:
Jtag
Click to expand...
Click to collapse
I don't know much about it. Which box will be helpful to debrick it? Thanks.

chure63 said:
I don't know much about it. Which box will be helpful to debrick it? Thanks.
Click to expand...
Click to collapse
Google mobiletechvideos
Sent from my Nexus 5 using xda app-developers app

95mediatech said:
Service center is better idea, since they can't go to download mode to see your phone stil got warranty or not.. just say phone dead ... while In pocket automatically
Generated by Galaxy S4® Octa-Core™ Black-Mambo , Signature not required.©
Click to expand...
Click to collapse
I'm not in the US....

chure63 said:
I'm not in the US....
Click to expand...
Click to collapse
You don't have to be in the US, it's just going to cost you more in shipping. Maybe you can find someone in your country that can jtag. Try some of the local phone repair shops.
Sent from my Nexus 5 using xda app-developers app

Have you tryed it?
http://forum.xda-developers.com/showthread.php?t=2265477
At the bottom there are some information "how to revive bricked device". Have you tryed it?

Related

help needed destroyed loader:(

hello felow galaxy users
i have a galaxy s and i tried to flash darky 9.1 rom on it
when i whas in bootloader i saw i had 3e recovery so i went on google to search on how to get back to 2e recovery
i found a file made by chainfire wich should arrange it treu odin
now when i connect the phone odin detects it and i can start but it always stays on seting up connection
now when i want to turn on the phone it gives a screen where i see a picture i need to hang the phone on the computer but it doesnt boot to the normal home screen anymore
hope some one can help me to get my phone working again
i can come in download mode but not in 3e recovery anymore
please help me as i need my phone work
let odin run for over 20 min without succes always on setup connection
and im using windows 7
...
go in to download mode and use ODIN??? you know what i mean???
mateusz1990 said:
go in to download mode and use ODIN??? you know what i mean???
Click to expand...
Click to collapse
no not quite sure
im trying to use odin now to flash chainfire his root and 2e recovery tar file
but it always stays on setup connection:S
miniterror said:
no not quite sure
im trying to use odin now to flash chainfire his root and 2e recovery tar file
but it always stays on setup connection:S
Click to expand...
Click to collapse
I used to love your ROMs for my old Touch HD.. good to see you now have a Galaxy S!
Not so sure from your posts above what method you have tried. When are you trying to connect Odin? You need to be in Download Mode first, fire up Odin, then connect your phone...
Is this what you are doing?
Also, which version of Odin you using? In Win7 you may need to right click and run as administrator?
The best way is to look on the odin how to here in forum
miniterror said:
hello felow galaxy users
i have a galaxy s and i tried to flash darky 9.1 rom on it
when i whas in bootloader i saw i had 3e recovery so i went on google to search on how to get back to 2e recovery
i found a file made by chainfire wich should arrange it treu odin
now when i connect the phone odin detects it and i can start but it always stays on seting up connection
now when i want to turn on the phone it gives a screen where i see a picture i need to hang the phone on the computer but it doesnt boot to the normal home screen anymore
hope some one can help me to get my phone working again
i can come in download mode but not in 3e recovery anymore
please help me as i need my phone work
let odin run for over 20 min without succes always on setup connection
and im using windows 7
Click to expand...
Click to collapse
Brother, use Odin3 v1.7 from my signature & see if it detects? A lot of guys have recovered their phones using 1.7. trust me.
pull the battery
wait a few seconds
put the battery back in
hold vol-down + power + home
You should get into download mode
connect the phone physically to the pc
flash a ROM or a kernel or whatever you desire
I wish you good luck^^
Close any kies process running in background and try again
Sent from my GT-I9000 using XDA App
krs360 said:
I used to love your ROMs for my old Touch HD.. good to see you now have a Galaxy S!
Not so sure from your posts above what method you have tried. When are you trying to connect Odin? You need to be in Download Mode first, fire up Odin, then connect your phone...
Is this what you are doing?
Also, which version of Odin you using? In Win7 you may need to right click and run as administrator?
Click to expand...
Click to collapse
glad you liked my rom
i personally dont have a galaxy
its from a friend
i have a desire hd way more easy to flahs then these samsungs(my brother has a galaxy to)
i have tried several odin versions but all without succes
he method i used is turn phone in downloadmode(says it with big letters on the screen) then start odin and connect the usb cable
odin detects it but never had succes(last attempt i let it run for 237 minutes)
the thing i wnated to flahs is succeded now but still not getting 2e recovery
gonna have to lok a little further on how to put darky his rom on it or you guys recoomend a better one
ragin said:
Brother, use Odin3 v1.7 from my signature & see if it detects? A lot of guys have recovered their phones using 1.7. trust me.
Click to expand...
Click to collapse
thanks mate
the first odin that actually succeeded flashing
to bad it still odenst has 2e recovery now or better yet no recovery at all but i can see the galaxy s boot up screen again
theduckking said:
pull the battery
wait a few seconds
put the battery back in
hold vol-down + power + home
You should get into download mode
connect the phone physically to the pc
flash a ROM or a kernel or whatever you desire
I wish you good luck^^
Click to expand...
Click to collapse
thanks mate
corgar said:
Close any kies process running in background and try again
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
thanks for the tip
will do that
edit: muchias gracias everybody its working again
you guys saved me alot of money
and i have recovery 2e wich i wnated to flash clockwork update.zip
at least i think it does work again
i hear a bootup sound and i see a animation
will report later as my work break is over
uhhmmmm is it now bricked?
now it doesnt do a thing anymore
when i press buttons for downloadmode nothing happens
when i only press the power button nothing happens
its completley dead now:S
is there anything i can do to force a start to anything
maybe with a software setup on the sd card?
or a script
most devices have a code wich will hot restart the phone to bootloader
read something about a jig you guys think it will work
gonna buy the stuff to make one tomorow
hope it works
miniterror said:
uhhmmmm is it now bricked?
now it doesnt do a thing anymore
when i press buttons for downloadmode nothing happens
when i only press the power button nothing happens
its completley dead now:S
is there anything i can do to force a start to anything
maybe with a software setup on the sd card?
or a script
most devices have a code wich will hot restart the phone to bootloader
read something about a jig you guys think it will work
gonna buy the stuff to make one tomorow
hope it works
Click to expand...
Click to collapse
The jig most likely wont work if the phone is completely dead, you could try a hairdryer it seems to work sometimes. Otherwise its back to samsung.
uciu said:
The jig most likely wont work if the phone is completely dead, you could try a hairdryer it seems to work sometimes. Otherwise its back to samsung.
Click to expand...
Click to collapse
can you link me to a page with the hairdryertrick?
cant find anything on google about it on how to do it
Maybe you've tried this already but I've had this problem after a bad flash and the phone wouldn't boot up anymore. I just remove the battery and all good again.
Sent from my GT-I9000 using XDA App
hmmm still no progress yet
i made a rig and even with that it doesnt boot or turn on
also when i put in the charger i dont see a light turning on its charging
wish i could have any form of live in it
I had the same problem, had to send it back but did not test it with a jig. Got one shortly after
Sent from my GT-I9000 using XDA App
jaju123 said:
I had the same problem, had to send it back but did not test it with a jig. Got one shortly after
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
thanks for all youre help guys
i didnt have any succes and i gave it back so it can be ruturned to the provider
hope it falls under warranty
did yours fall under warranty or under insurance of youre phone?
If you bricked your phone than pm me i helped many of peoples

[Q] Bricked my galaxy 3

Hello yesterday when i was flashing a custom ROM Odin hanged at facroryfs.rfs.
I pulled my cable out and rebooted the phone by pulling out the battery but now the phone won't start even in download mode the screen just stays black.
noting helps usb cable, loading the phone , ..
Do you have any idea how to fix this?
timothywer said:
Hello yesterday when i was flashing a custom ROM Odin hanged at facroryfs.rfs.
I pulled my cable out and rebooted the phone by pulling out the battery but now the phone won't start even in download mode the screen just stays black.
noting helps usb cable, loading the phone , ..
Do you have any idea how to fix this?
Click to expand...
Click to collapse
Try recovery mode, but probably it won't work neither. Try also removing sim and sdcard... In such cases, when you cannot start the phone in any mode, the Samsung service is the only solution...
ok. can it be done under warranty?
what do i say to samsungg service?
timothywer said:
Hello yesterday when i was flashing a custom ROM Odin hanged at facroryfs.rfs.
I pulled my cable out and rebooted the phone by pulling out the battery but now the phone won't start even in download mode the screen just stays black.
noting helps usb cable, loading the phone , ..
Do you have any idea how to fix this?
Click to expand...
Click to collapse
umm. i had the same prb thrice.. odin hanged.. but i ws able to start my g3 in download mode.. dunno wht hppnd to urs..
probably the bootloader wasn't flashed when i pulled the cable out.
So there is no bootloader on my device so it doesn't start
timothywer said:
ok. can it be done under warranty?
what do i say to samsungg service?
Click to expand...
Click to collapse
I guess this is covered by warranty... you can say the phone crashed after reboot or after using Kies.
hamsiro said:
I guess this is covered by warranty... you can say the phone crashed after reboot or after using Kies.
Click to expand...
Click to collapse
I can possibly purchase the phone off you. If nothing can be resolved by yourselves!
Tell samsung it crashed while updating with Kies

[HELP]My phone is bricked... Am I screwed ?

I've made a HUGE mistake... I wanted to flash Abysskernel over RocketRom V4 to make a full wipe. But I've done it to fast, without looking good at what I was doing.
I've flashed CYANOGENMOD 9... And flashing has stuck. Now, I can't start my phone. No more recovery, no more download mode !!!
I think I'm screwed.
Is there a little chance to repear it without SAV ?
Thank you.
you flashed CM9 on ICS Rom...
you are screwed... the CM9 instructions clearly state to flash from GB rooted or other safe kernel
Try usb jig
Sent from my GT-N7000 using xda premium
musashiro said:
you flashed CM9 on ICS Rom...
you are screwed... the CM9 instructions clearly state to flash from GB rooted or other safe kernel
Click to expand...
Click to collapse
I know... it was a mistake, I've selected zip file too fast...It wasn't the good one :'(
zepretender said:
I know... it was a mistake, I've selected zip file too fast...It wasn't the good one :'(
Click to expand...
Click to collapse
Pull the battery, wait 30 seconds and put it back in and try to get in downloadmode.
gee2012 said:
Pull the battery, wait 30 seconds and put it back in and try to get in downloadmode.
Click to expand...
Click to collapse
No download mode... Nothing. Full black screen.
Just pull the battery wait for 10 to 15 seconds put it in volume down+home+power button for 10 seconds and again count of 10 just plug in ur usb cable and see wether the phone is detected through odin if yes and then use 16gb pit file with bootloaders and flash any stock gb rom
bhasg1007 said:
Just pull the battery wait for 10 to 15 seconds put it in volume down+home+power button for 10 seconds and again count of 10 just plug in ur usb cable and see wether the phone is detected through odin if yes and then use 16gb pit file with bootloaders and flash any stock gb rom
Click to expand...
Click to collapse
What is "16gb pit file" ??
if its totally black and you cant turn it on, you are lucky if you still have the warranty.. they cant check the flash counter...
just tell them you suddenly cant open the phone
Here's a guide. I actually used this to fix my Note and it worked.
http://www.android.gs/easily-fix-bricked-samsung-galaxy-note-n7000/
alexdumitru said:
Here's a guide. I actually used this to fix my Note and it worked.
http://www.android.gs/easily-fix-bricked-samsung-galaxy-note-n7000/
Click to expand...
Click to collapse
I can't reach Download Mode :'(
Totally black screen.
I hope that musashiro is right.
hi
i have got the same problem.
alexdumitru your problem is not same. the link you shared they mention to solve softbrick devices. but me and zepretender got a hardbrick devices. it means you can not go to download mode. so i think only they solve it with changing mainboard or damaged parts.
is there any other new ways for solve hard brick devices??
That's a hard brick too. The emmc is damaged, though it enters download mode, it's true. But I've seen cases where the device entered download mode, though the screen remained blank. So try to enter download mode, even if the screen is still blank and then connect it to the computer. If Odin recognizes it, you might be lucky.
i´ve sufferd the same problem. i´ve bricked my note - no recovery, no download mode. i tried to go to download mode, but odin didn´t recognized usb connection. My phone was dead. I´ve sent my device to samsung for warranty repair.
Hmm I didn't know that.actually I hv tried everythng but odin didn't recgnse it. I will try your suggest ofcourse.its worth to try. So whle usb cble connected should I try to go to download mode? In some topics they mentioning about use another usb cable.which is dfferent than normal ones. Do u know anythng about it?
Jig usb can open my phone in download mode? Is that works for hardbricked phones? Because Im gonna buy one.
quarkw said:
Jig usb can open my phone in download mode? Is that works for hardbricked phones? Because Im gonna buy one.
Click to expand...
Click to collapse
If your phone is "superbricked" hard brick, then a JIG won't work because it damages the eMMc chip. But, you can make your own JIG. You can get stuff at your local electronics store, like Radioshack. I don't know where you live though, haha!
Even if the JIG gets you in download mode though, if Odin fails at factoryfs.img or NAND write start then it will still be bricked.

Sos! Help: Broken download mode

Hi guys, so I flshed a wrong kdz file on my D801 wind canadian variant, no my phone stuck on LG logo boot screen with green led, i have no fastboot mode, no twrp recovery, I can just access default recovery to hard reset, when i try to enter download mode by pressing volume+ while pluging the phone to pc, it goes just to frst screen, i mean the download mode logo with blue dots!!!!
Please any help would be appreciated, I'm ready to pay for fixing it as i live in a country where my phone won't be fixed otherwise. please please.
Helppppppppppppppppppp Please please just answer me
Up up up up up up up up up up
devdassi said:
Up up up up up up up up up up
Click to expand...
Click to collapse
bud same thing happened to me. and unfortunatly there is no fix for this. everytime i turned my phone on i got the little android guy then it would stay on lg screen with blue and green LED. try download mode it goesto the first screen of little blue dots.
since warrenty should not be able to tell anything about root or etc. i sent it in. in the mean time i called my carrier company and they sent me out a new phone for 35$. but i have to send old one back wether it ges fixed or not.
sorry bud but there is no way back from that. even tho your computer gives it a port its not fully booting so you cant flash anything..... here is one last thing you can try................ this could be your only hope.......it didnt help me but it might work for you...
good luck
http://forum.xda-developers.com/showthread.php?t=2582142
jester12345 said:
bud same thing happened to me. and unfortunatly there is no fix for this. everytime i turned my phone on i got the little android guy then it would stay on lg screen with blue and green LED. try download mode it goesto the first screen of little blue dots.
since warrenty should not be able to tell anything about root or etc. i sent it in. in the mean time i called my carrier company and they sent me out a new phone for 35$. but i have to send old one back wether it ges fixed or not.
sorry bud but there is no way back from that. even tho your computer gives it a port its not fully booting so you cant flash anything..... here is one last thing you can try................ this could be your only hope.......it didnt help me but it might work for you...
good luck
http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
thank you so much sir for replying, what is really wierd is that when i connect it to my pc, kingo root detects it, and gives me the option to root, then the rootin process stops at fetching scripts.
I cannot read.
Gnarfsan said:
If you can do that, you should be able to fix it via that Ubuntu guide to restore the partitions I think...?
Link: http://forum.xda-developers.com/showthread.php?t=2582142
Sent from my LG-D802 using xda app-developers app
Click to expand...
Click to collapse
I was able to connect to pc like he was. And kingo saw it but about 2 mins everything failed. No matter what port name i gave is. Any flash tool as well. And ubuntu did not work for me. Altho i did suggest that ubuntu method just incase it does work for you. Exhaust all options before giving it up for repair or warrenty exchange good luck and i hope you are more secessful then i was. Altho rogers did send me out a new phone good luck
thank you guys , my phone when on lg logo, and connected to pc, i can see it in device manager under modem as LGE android net usb modem,
and under ports as LGE android serial port com 8, any chance or sign of live to my phone, as mentionned before, there is no waranty services in our country.
@ jester12345 Did ubuntu read your phone when you tried the method of flashing partitions?
devdassi said:
@ jester12345 Did ubuntu read your phone when you tried the method of flashing partitions?
Click to expand...
Click to collapse
No ubuntu did not see my phone. Only my pc did even tho my phone wouldnt finish booting.
Could there be a paid fix? I'm ready to pay to bring my phone to life again.

Need Help!! my sm-n9005 can't access to recovery and bootloop with 2 vibrations

Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.
rodyrach said:
Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.
Click to expand...
Click to collapse
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?
devilsdouble said:
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?
Click to expand...
Click to collapse
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen
rodyrach said:
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen
Click to expand...
Click to collapse
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.
devilsdouble said:
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.
Click to expand...
Click to collapse
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817
rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
hi, your problems are resolved?
devilsdouble said:
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817
Click to expand...
Click to collapse
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.
Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.
rodyrach said:
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.
Click to expand...
Click to collapse
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging
cryostasis25 said:
Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.
Click to expand...
Click to collapse
Hi i have already use pit file with stock rom via odin. same result. bootloop at the logo.
rodyrach said:
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging
Click to expand...
Click to collapse
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.
devilsdouble said:
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.
Click to expand...
Click to collapse
My phone dont show up on ADB.
rodyrach said:
My phone dont show up on ADB.
Click to expand...
Click to collapse
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.
devilsdouble said:
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.
Click to expand...
Click to collapse
My problem not solved
rodyrach said:
My problem not solved
Click to expand...
Click to collapse
Flash official lollipop poland done! still bootloop at "samsung galaxy note 3 sm-n9005".
can't access to recovery mode but download mode still working!
before to sleep i left the charger connected to the phone still bootloop until the morning and BANG i waked up saw lollipop samsung logo and blue led!
screen stucked at lollipop samsung logo!
i turned off the phone left in charge ( normal charge with animation in green battery, thing that did not before because as soon as I connected the charger to the phone it tried to boot and reboot all time after e few seconds with 2 vibrations) and gone to work.
go back home battery charged at 100%, tried to boot in recovery mode and it working!
i performed a wipe data factory reset and wipe cache partition and BANG my note 3 booted normally.
done a few hours and it works very well.
Thanks to all for your supports.
Really weird i don't understand whats happened during the night.
But im so glad .

Categories

Resources