Hi everyone, I am new to the Thinkpad forums. I just bought a TPT and installed CM10 v.0.8.1. However, the tablet is having endless reboots as the Rom appears very unstable.
Can someone please upload the latest stock Rom from Lenovo? I don't have a backup rom. Thank you!
475719 said:
Hi everyone, I am new to the Thinkpad forums. I just bought a TPT and installed CM10 v.0.8.1. However, the tablet is having endless reboots as the Rom appears very unstable.
Can someone please upload the latest stock Rom from Lenovo? I don't have a backup rom. Thank you!
Click to expand...
Click to collapse
Which one? ROW? WE? US?
Unless you explicitly need the pen-only mode I recommend trying version 0.7 as it was much more stable than 0.8.1, at least in my experience.
kingOfTheLab said:
Unless you explicitly need the pen-only mode I recommend trying version 0.7 as it was much more stable than 0.8.1, at least in my experience.
Click to expand...
Click to collapse
in my case the 0.8.1 is very stable and runs very smooth... i was first on 0.8 which was a desaster... reboots every time and lost some productive data also :/ then i downgraded to 0.7 which was OK, but no pen only mode is very nasty when i try to write on the device e.g in university courses...
so now i'm on 0.8.1 and i have no problems...
maybe it helps if you clean all the caches and stuff?
I moved from 0.6.0 to 0.8.1 and find it MUCH more stable. Pen Only mode work quite well in the new 0.8.1 version too!
==
Michael
I did a few factory resets after installing the rom and I made sure to clean out the caches, etc via clockword recovery before installing the rom.
I am not sure why my TPT is rebooting unexpectedly so much.
I rooted the tablet after upgrading the stock rom to ICS, then got CW mod recovery. I am not sure which version TPT I have. I bought it in the US and it is 16gb if that helps.
Thanks!
475719 said:
I did a few factory resets after installing the rom and I made sure to clean out the caches, etc via clockword recovery before installing the rom.
I am not sure why my TPT is rebooting unexpectedly so much.
I rooted the tablet after upgrading the stock rom to ICS, then got CW mod recovery. I am not sure which version TPT I have. I bought it in the US and it is 16gb if that helps.
Thanks!
Click to expand...
Click to collapse
Check your Settings -> About this tablet.
emuandco said:
Check your Settings -> About this tablet.
Click to expand...
Click to collapse
What am I looking for? For model number, I see "ThinkpadTablet"
475719 said:
What am I looking for? For model number, I see "ThinkpadTablet"
Click to expand...
Click to collapse
no check for the software version. there is a US or we or row in it
emuandco said:
no check for the software version. there is a US or we or row in it
Click to expand...
Click to collapse
I'm sorry, but I don't see either US or we or row anywhere in the about tablet sections..
Me too
emuandco said:
no check for the software version. there is a US or we or row in it
Click to expand...
Click to collapse
I have been having issues with reboots as well. I have a US 32 gig and running 8.1. Not sure if it was because I had a micro SD with an adapter. I will try it without the micro SD.
475719 said:
I'm sorry, but I don't see either US or we or row anywhere in the about tablet sections..
Click to expand...
Click to collapse
if you have installed cm10 you won't find your Information in the 'about the tablet' section. Just install the app ' Android System Info' and look at system/buildinfo/fingerprints. At the end you will find something like 130_WE (i hope thats not an info about whats used by the cm10 build)/( WE = western europe). Besides: i have every now and then a sleep to death with 0.8.1. I havent had those with 0.8.0. I tried a lot and so far only one thing works - i turned of the light sensor. ( works at least since a few hours)
Related
Here it is:
http://www.multiupload.com/7AE2I353GR
Baseband 05.01.03
thx 2 [email protected]
Originally posted:
http://android.modaco.com/content/a...28/rom-leak-new-froyo-leak-maybe-final-build/
Cool... i am install it now. Will write if find some bugs greetings
UPDATE : is faster than http://forum.xda-developers.com/showthread.php?t=776881 ... good job!
Thanks, will be the first rom I install...
-Zaka- said:
Thanks, will be the first rom I install...
Click to expand...
Click to collapse
Good luck!!!
butamuh4o said:
Good luck!!!
Click to expand...
Click to collapse
Thanks! I used the Acer Download Tool and it completed succesfuly. But I don´t like the Acer IU, I prefer the Android´s...
-Zaka- said:
Thanks! I used the Acer Download Tool and it completed succesfuly. But I don´t like the Acer IU, I prefer the Android´s...
Click to expand...
Click to collapse
True... it is not sooo bad, but... i prefer the original interface too
hehhee.....Current using "FroYo LEAK! Acer_LiquidF_0.007.00_EMEA-GEN1_05.01.01" , want to upgrade so Downloading now........
I got the problem here when i am using A1 tools to install the ROM is show "your phone is not run OS mode" why???? pls help???? thanks
Good Jobs Thanks.........
updated! seems a little faster than previous leak... maybe a new version will be out ASAP looking at the forum
Sadly, I cannot install either leak on my Liquid. I keep getting "E:Verification Failed" with both (downloaded this one three times).
I have no problems installing the Liquid Galaxy 2.1 ROM though.
i installed it with Acer download tool today on my acer liquid - everything went fine
I don't like new UI - you don't have multiple desktops anymore. It can be started as a separate widget, but it's very inconvenient not to always be able to have access to all your widgets immediately.
For the rest it seems to work fine. Flash and multi-touch zoom work in the browser. Wifi AP works too.
Settings-->Applications-->User Interface-->Android UI-->Reboot
HustlinDaily said:
Settings-->Applications-->User Interface-->Android UI-->Reboot
Click to expand...
Click to collapse
thanks a lot for the tip! I had no idea about this setting option in 2.2!
Guys, do I need to install a signed European ROM and then update the FroYo leak through the Acer updater?
Since I have the Rogers version, I obviously cannot update without Malez, which is giving me "verification" and "no script" errors. I've unmounted FS like I'm told to do but to no avail.
I really want to try this ROM. Unlike some folks, I see the potential in Acer's new UI.
Nevermind, I was using the wrong Acer updater.
applebook said:
Guys, do I need to install a signed European ROM and then update the FroYo leak through the Acer updater?
Since I have the Rogers version, I obviously cannot update without Malez, which is giving me "verification" and "no script" errors. I've unmounted FS like I'm told to do but to no avail.
I really want to try this ROM. Unlike some folks, I see the potential in Acer's new UI.
Nevermind, I was using the wrong Acer updater.
Click to expand...
Click to collapse
I have Rogers version - too... in previous Thread i wrote how to install it and how much problems i have. I try to install this Rom 6 times before i was successful. Every time device give me different error and i use Update mode. Later i made it.
Sorry for my English.. just try to install it more times. (and if you need- use Recovery mode)
I finally managed to install it with the official Acer updater tool.
The new interface looks really nice to me. Unfortunately, the History and Gallery shortcuts are too laggy, but otherwise, it looks slick, and I love the pop-up menus when you click on the task bar.
Also, there is a second delay when waking the phone up from standby.
no 3g issues
applebook said:
I finally managed to install it with the official Acer updater tool.
The new interface looks really nice to me. Unfortunately, the History and Gallery shortcuts are too laggy, but otherwise, it looks slick, and I love the pop-up menus when you click on the task bar.
Also, there is a second delay when waking the phone up from standby.
Click to expand...
Click to collapse
So you have no problems with 850 3g, does this rom update the radio, i had motorola dext that i rooted and threw a custom rom on and i lost 850 band doing that, so i'm a littlemore cautious as I use fido as my provider
Hi everybody,
I made a bloatware-free stock Froyo ROM based on B158 which includes overclocked kernel from hiapk-forums.
It's rooted. Nothing special at all but may be useful for ppl who just got their new phone delivered. This ROM will wipe your /cust_data + /data +/system. So use at your own risk and backup important data first (NANDROID).
Everything works as expected.
Credits: stockwell, Huawei, GoAPK, Koush, CM-Team and anyone else whom I forgot.
Download + detailed Instructions
Will probably buy the phone tomorrow just to fool around with it, really appreciated what you did there!
On a side question: the bootloader is not locked on this device or is it?
how much OC?
pb_1996 said:
how much OC?
Click to expand...
Click to collapse
the oc kernel from hiapk is at 1056MHz max..
i m gonna try this
so far working good , waiting for something like CM6 or 7
not so good sorry to say..
ibnefahim said:
so far working good , waiting for something like CM6 or 7
Click to expand...
Click to collapse
Me too, hopefully we will see CM7 in the near future..
OK so its in Chinese with no setup, and no Market, so this is a good start but not a complete rom at all. I will go back to the 135 build untill one that comes out that actually is complete and not just one page of apps. Very Very important for me to have Market etc etc..
M..
Works great after changing language and installing happened from cwm. Thanks
Sent from my u8800 using XDA App
mattbee said:
OK so its in Chinese with no setup, and no Market, so this is a good start but not a complete rom at all. I will go back to the 135 build untill one that comes out that actually is complete and not just one page of apps. Very Very important for me to have Market etc etc..
M..
Click to expand...
Click to collapse
I just flashed this rom, and tho it did start with chinese characters somehow it changed to english...dunno how that happened as another poster said he installed a language pack, but mine did so automatically.
as far as the market etc is concerned you need to download the gapps zip using the link the original poster provided. It is an older version of the market and i'm not too sure how to update it...being fairly new to the smartphone scene would anyone care to share???
thanks dibb
you will have to install GAPPS from CyanogenMod Wiki as stated in the original thread (see link on 1st post). Afterwards most GAPPS will update themselves once you are online or use market
getting force close android.process.acore
what i think i did
full wipe
flashed the b158
booted phone and turned off mobile data and set up wifi
booted back into recovery
mounted /system
installed gapps.zip
booted back into phone
signed into google
restored titanium backup
all was good for about 5 mins then constant force closes so bad it was a mission to power off. I full wiped again and reflashed but it happened again??? So for round 3 i am not gonna use titanium but manually download all my apps again and see what happens.
can anyone suggest where the problem may be??
Doubt
Hi everyone, i'm wonder if with this room my Huawei will be unlocked, because my phone it's unavailable for use it with other company, and i don't know how to unlock it. Your room seems pretty good, congrats!!
Hello people,
I was looking through the nightly builds on download.cyanogenmod.com
I saw a fresh build for TF101 dated for 2/27.
Check it out. I will flash it and see how it is.
Someone also needs to create an Official CM9 Nightly page in Dev section.
So who wants to be the Guinea pig? I'm already running that KANG that was posted up earlier this weekend. I may try it after I charge up.
yea...guinea pig here....goes through boot animation and then system ui and trebuchet (the launcher) fc...i would say stay away until some official announcement is made
Yeah. It doesn't even boot up probably. :-(... going back to stock
Sent from my Galaxy Nexus using XDA App
You have to start somewhere.
Now at least we have an official CM9 branch, which means someone is working on it
brzgw said:
Hello people,
I was looking through the nightly builds on download.cyanogenmod.com
I saw a fresh build for TF101 dated for 2/27.
Check it out. I will flash it and see how it is.
Someone also needs to create an Official CM9 Nightly page in Dev section.
Click to expand...
Click to collapse
ehm where from?
Edit: http://download.cyanogenmod.com/?device=tf101
Found IT ^_^
I got launcher force closes when i had an overclocked kernel with a stock rom. Gonna check this out a little later.
Sent from my Transformer TF101 using Tapatalk
I'm surprised that this news seems to be not generating much buzz here. Not knocking any of the other devs, because most of them do amazing work, but CM is the bee's knees. When those nightlies get semi-mature, I'll be running them and never look back. They've never done me wrong before. Any device I've ever had that was supported, was the best ROM available for my needs. YMMV, of course.
I think when its own thread is created youll see the buzz, cm rocks lol
Sent from my R800i using xda premium
I tried flashing it and got the same fc, the system ui and launcher. I tried it again but formatted system this time. Got the same results but was able to see the clock and tablet reboot options.
Guess it's not ready yet
shadrach47 said:
I tried flashing it and got the same fc, the system ui and launcher. I tried it again but formatted system this time. Got the same results but was able to see the clock and tablet reboot options.
Guess it's not ready yet
Click to expand...
Click to collapse
Yep, same here, even with wipe dalvik and fix permissions, FC´s :S
Let us wait for a new update....
Alas, I ran across this on get.cm also. Got excited and then had the FC issues like everyone else. At least it is a step in the right direction.
Don´t know if its related,
lost my wifi hability after trying this, anyone else?
it just won´t turn on :S
Was just about to try flashing it until I saw how many people were unsuccessful. Oh well, guess I'll wait until an official release.
ferreinf said:
Don´t know if its related,
lost my wifi hability after trying this, anyone else?
it just won´t turn on :S
Click to expand...
Click to collapse
Not sure if it's related or not but my wifi on a Kanged version of CM9 is acting weird, disconnecting and saying out of range.
I tried this one first but it could just be the ROM I'm on.
shadrach47 said:
Not sure if it's related or not but my wifi on a Kanged version of CM9 is acting weird, disconnecting and saying out of range.
I tried this one first but it could just be the ROM I'm on.
Click to expand...
Click to collapse
Ok got it to work again, had to use Super Wipe Lite from http://forum.xda-developers.com/showthread.php?t=1245892
after running the script flashed latest revolver and got wifi backup....
Same here, will try your suggestion below.
Edit: Had to run the wipe zip, reflash and boot into current rom and the restore a backup to get it working again. PITA But it works.
ferreinf said:
Don´t know if its related,
lost my wifi hability after trying this, anyone else?
it just won´t turn on :S
Click to expand...
Click to collapse
CM rocks
lollazzo said:
CM rocks
Click to expand...
Click to collapse
i would like to see MIUI V4 on tab, as it will be easier to port than 2.x was ^_^
New official CM9 nightly on get.cm. It boots!!! Gonna test it and report back in a bit.
EDIT1: Wifi works and was able to log into my Google account. Currently restoring my Titanium Backup and will test a bit more after that. Also, camera makes the tablet reboot on first launch, but works after that. Odd. More info to come.
EDIT2: Face unlock is there, but doesn't recognize my face, so I can't test it out. It couldn't recognize my face on my Nexus S 4G either. Maybe my face is just derped up. Anyway, there is nothing that I could tell that is broken. Even the MicroSD mounted with no issue. I don't have a keyboard dock to test it out, otherwise I would. Games and videos both work fine.
Hi all!
I would be very happy if you all could share your ideas and knowledge with me regarding
List of things to do after buying a new Android Tablet
I am expecting my GT-N8000 next week and I want to start on the right footing with my new device.
It could be a list of do this and do that....step by step in order of precedence.
ex:
1. Disable UAC on Windows
2. Install Samsung Kies software on PC
3. Backup current/original Bootloader and save it on your PC for fallback purposes
4. Backup current/original ROM and save it on your PC for fallback purposes
5. Copy CWM or whatever...on your SD Card.
6. Boot up by pressing this and that button....
7. and the list goes on and on....(with all of your help!)
Click to expand...
Click to collapse
I've gone through the forum but I am so confused (being new to anything android )
I hope this will be a starting point for all newbies who are buying their android phone/tablet for the first time.
freelancer81 said:
Hi all!
I would be very happy if you all could share your ideas and knowledge with me regarding
List of things to do after buying a new Android Tablet
I am expecting my GT-N8000 next week and I want to start on the right footing with my new device.
It could be a list of do this and do that....step by step in order of precedence.
ex:
I've gone through the forum but I am so confused (being new to anything android )
I hope this will be a starting point for all newbies who are buying their android phone/tablet for the first time.
Click to expand...
Click to collapse
ROOT, Then ROOT, THEN ROOT, and lastly ROOT...
copc said:
ROOT, Then ROOT, THEN ROOT, and lastly ROOT...
Click to expand...
Click to collapse
Root - THEN EFS BACKUP
EFS Backup to Tar.gz and also to IMG - you really don't want to lose your IMEI
Only after that - do anything else
Bulbous said:
Root - THEN EFS BACKUP
EFS Backup to Tar.gz and also to IMG - you really don't want to lose your IMEI
Only after that - do anything else
Click to expand...
Click to collapse
thank you for the heads up
so, can you specify which tool i should use for backing up the EFS?
freelancer81 said:
thank you for the heads up
so, can you specify which tool i should use for backing up the EFS?
Click to expand...
Click to collapse
I just use a terminal emulator to get a command line interface (CLI) then do it manually
http://forum.xda-developers.com/showthread.php?t=859914
Root, install/setup firewall and adaway to block ads, setup tasker for automated things, install drawing apps, flash mod to get chrome into desktop mode only, and then i install all my other needed apps.
Sent from my SGH-T889 using xda app-developers app
my list of things to do after going through a galaxy tab 10.1 tab and a galaxy note tab 10.1 searching for a productivity tablet...give both to the kids and buy a Microsoft Surface Pro 128 GB....as an admin for a large company, I can do everything off it without having to make other less useful tools work well enough...
Get a case. A black one to be specific haha I got a white one to go with my white note, not the best idea... Got dirty fast. Also, if you are going to flash a rom, make it a stock based rom at first. Same UI and experience, but much faster.
Sent from my GT-N8013 using Tapatalk 4 Beta
inferno 414 said:
Get a case. A black one to be specific haha I got a white one to go with my white note, not the best idea... Got dirty fast. Also, if you are going to flash a rom, make it a stock based rom at first. Same UI and experience, but much faster.
Sent from my GT-N8013 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Hi, thanks for the suggestion.
yeah...I've already ordered a black rotating leather case, a scratch guard and a handsfree set.
I plan to flash the amazing Revolution HD 9.0!
I've never done anything like this and am hesitant a bit though.
thanks again!!
freelancer81 said:
Hi, thanks for the suggestion.
yeah...I've already ordered a black rotating leather case, a scratch guard and a handsfree set.
I plan to flash the amazing Revolution HD 9.0!
I've never done anything like this and am hesitant a bit though.
thanks again!!
Click to expand...
Click to collapse
I'm actually running Revolution! Fantastic rom. I didn't have any trouble flashing it, but I'm sure some people have. Just make sure to do a backup before flashing
inferno 414 said:
I'm actually running Revolution! Fantastic rom. I didn't have any trouble flashing it, but I'm sure some people have. Just make sure to do a backup before flashing
Click to expand...
Click to collapse
i plan to do a nandroid backup + efs backup.
i've downloaded the stock rom too.
i want to know whether 3G cellular will function or not coz some members are posting problem with not being able to use cellular anymore.
what about you...any problem?
freelancer81 said:
i plan to do a nandroid backup + efs backup.
i've downloaded the stock rom too.
i want to know whether 3G cellular will function or not coz some members are posting problem with not being able to use cellular anymore.
what about you...any problem?
Click to expand...
Click to collapse
Sorry, couldn't help you there I'm running the WiFi version, so naturally, it doesn't work for me haha Sorry again
inferno 414 said:
Sorry, couldn't help you there I'm running the WiFi version, so naturally, it doesn't work for me haha Sorry again
Click to expand...
Click to collapse
Thanks anyway.
I need to really confirm this before I flash it.
Oh...I am such a big noob.
Can you pls look around the Revolution HD 9.0 thread and and confirm if you got time? My net is so slow and I am on a win mobile phone...hard to go through 200 pages!
Greatly appreciate you for your concern.
freelancer81 said:
Thanks anyway.
I need to really confirm this before I flash it.
Oh...I am such a big noob.
Can you pls look around the Revolution HD 9.0 thread and and confirm if you got time? My net is so slow and I am on a win mobile phone...hard to go through 200 pages!
Greatly appreciate you for your concern.
Click to expand...
Click to collapse
Yeah, Just a sec
EDIT: I think it's working. I didn't find anyone that was having a problem anymore. The rom is based on the 3G version firmware, so I doubt you would have trouble.
inferno 414 said:
Yeah, Just a sec
EDIT: I think it's working. I didn't find anyone that was having a problem anymore. The rom is based on the 3G version firmware, so I doubt you would have trouble.
Click to expand...
Click to collapse
thanks again!!!
now there's no stopping me in flashing the note to awesomeness!!!
freelancer81 said:
thanks again!!!
now there's no stopping me in flashing the note to awesomeness!!!
Click to expand...
Click to collapse
Good luck!
inferno 414 said:
Good luck!
Click to expand...
Click to collapse
I have rooted it finally using the Samsung Galaxy Note 10.1 ToolKit (I chose TWRP custom recovery as it is touch/button based)
Then I did a full backup of the device using Nandroid TWRP
Then, just to be safe, I also did an EFS backup using EFS Professional.
I am just playing around and installing apps and games before I flash the Revolution HD 9.0 rom.
Thanks for the help!
Hello xda.
I installed Cyanogenmod on my Samsung Galaxy Note 3 today with no problems at all, however I've found something that seems a bit weird. (I know there is supposed to be bugs in nightlies, of course, but I thought i'd ask anyway.)
In the performance settings of the tab, it keeps the minimum CPU frequency to 1190mhz. If I put it to 300mhz, it will work, but as soon as I exit out of the performance tab, it goes back to 1190mhz. I figured that my phone was quite hot when I didn't use it, and that's how I found out.
Have anyone seen this on the latest CM11 nightly for the Note 3? I hope somebody out there know how I can fix it.
Many thanks.
TjabbyD said:
Hello xda.
I installed Cyanogenmod on my Samsung Galaxy Note 3 today with no problems at all, however I've found something that seems a bit weird. (I know there is supposed to be bugs in nightlies, of course, but I thought i'd ask anyway.)
In the performance settings of the tab, it keeps the minimum CPU frequency to 1190mhz. If I put it to 300mhz, it will work, but as soon as I exit out of the performance tab, it goes back to 1190mhz. I figured that my phone was quite hot when I didn't use it, and that's how I found out.
Have anyone seen this on the latest CM11 nightly for the Note 3? I hope somebody out there know how I can fix it.
Many thanks.
Click to expand...
Click to collapse
try set cpu app or use temask kernel found here http://forum.xda-developers.com/showthread.php?t=2687074&page=3
jaythenut said:
try set cpu app or use temask kernel found here http://forum.xda-developers.com/showthread.php?t=2687074&page=3
Click to expand...
Click to collapse
Thanks a lot for your reply.
I've heard a little about kernels. The thing is, that this is the first time I've ever put a custom rom on an android device, so I'm not really 100% familiar with all this yet, however if the custom kernel won't be able to brick my phone, I sure would give that a try.
Should I go with the "stable" version or the beta version of the kernel?
TjabbyD said:
Thanks a lot for your reply.
I've heard a little about kernels. The thing is, that this is the first time I've ever put a custom rom on an android device, so I'm not really 100% familiar with all this yet, however if the custom kernel won't be able to brick my phone, I sure would give that a try.
Should I go with the "stable" version or the beta version of the kernel?
Click to expand...
Click to collapse
go with beta its very stable just flash with cmw or twrp and dont touch anything
jaythenut said:
go with beta its very stable just flash with cmw or twrp and dont touch anything
Click to expand...
Click to collapse
Thank you a lot
I'm taking the beta version then!
- So... I just tried to flash it with Odin, but as it is a .zip file and not .tar, I can't do that.
I do have TWRP on my device, so I can use that, I am not very sure on how to do that though?
I'm sorry for the noobish questions. First time I installed a custom rom
TjabbyD said:
Thank you a lot
I'm taking the beta version then!
- So... I just tried to flash it with Odin, but as it is a .zip file and not .tar, I can't do that.
I do have TWRP on my device, so I can use that, I am not very sure on how to do that though?
I'm sorry for the noobish questions. First time I installed a custom rom
Click to expand...
Click to collapse
go to twrp then install zip find the kernel press it it will install then reboot should be good to go do a backup just in case
jaythenut said:
go to twrp then install zip find the kernel press it it will install then reboot should be good to go do a backup just in case
Click to expand...
Click to collapse
That sounds amazing!
Thanks for your help man I appreciate it!
So, just to be 100% sure, I am going to download and install the "NEW BETA KERNEL v3.02 b1" Right?
TjabbyD said:
That sounds amazing!
Thanks for your help man I appreciate it!
So, just to be 100% sure, I am going to download and install the "NEW BETA KERNEL v3.02 b1" Right?
Click to expand...
Click to collapse
yes mate
you should try his rom its one of the best cm roms out there
jaythenut said:
yes mate
you should try his rom its one of the best cm roms out there
Click to expand...
Click to collapse
Yeah I've heard a lot about his ROM too, I should have installed that instead of the official nightly, oh well. Perhaps I will soon
I really appreciate your help. On to install the kernel now! Hopefully I will get as amazing battery life as the show
TjabbyD said:
Yeah I've heard a lot about his ROM too, I should have installed that instead of the official nightly, oh well. Perhaps I will soon
I really appreciate your help. On to install the kernel now! Hopefully I will get as amazing battery life as the show
Click to expand...
Click to collapse
you can just flash over the top with out loosing any data
jaythenut said:
you can just flash over the top with out loosing any data
Click to expand...
Click to collapse
Oh really? How?
Just the regular way of installing a rom or?
TjabbyD said:
Oh really? How?
Just the regular way of installing a rom or?
Click to expand...
Click to collapse
download rom on your phone flash it with twrp then flash the same gapps with twrp (must be the same gapps or it will factory reset)
thats it done
sembuild articles
jaythenut said:
download rom on your phone flash it with twrp then flash the same gapps with twrp (must be the same gapps or it will factory reset)
thats it done
Click to expand...
Click to collapse
That's amazing! I'll see if I will do that soon.
I installed the kernel and everything looks fine, however the performance tab is still acting weird. I think I will install a CPU app.
So this is it? There is no new settings I need to check or anything?
TjabbyD said:
That's amazing! I'll see if I will do that soon.
I installed the kernel and everything looks fine, however the performance tab is still acting weird. I think I will install a CPU app.
So this is it? There is no new settings I need to check or anything?
Click to expand...
Click to collapse
nope dont use performance tab at all use this app if you want to play with this settings
Trickser settings
Eco mode - off
MP-Decision - off
Intelli-plugin - on
Dynamic Fsync - on
Governor - Intelli-demand
Scheduler - row
https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en_GB
jaythenut said:
nope dont use performance tab at all use this app if you want to play with this settings
Trickser settings
Eco mode - off
MP-Decision - off
Intelli-plugin - on
Dynamic Fsync - on
Governor - Intelli-demand
Scheduler - row
https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en_GB
Click to expand...
Click to collapse
Got everything set up and running now!
Thanks a lot for your help mate! I really appreciate your time!
Now I "hopefully" will have amazing battery life just like the other people in the thread!