[Q] Bricked my galaxy 3 - Galaxy 3 General

Hello yesterday when i was flashing a custom ROM Odin hanged at facroryfs.rfs.
I pulled my cable out and rebooted the phone by pulling out the battery but now the phone won't start even in download mode the screen just stays black.
noting helps usb cable, loading the phone , ..
Do you have any idea how to fix this?

timothywer said:
Hello yesterday when i was flashing a custom ROM Odin hanged at facroryfs.rfs.
I pulled my cable out and rebooted the phone by pulling out the battery but now the phone won't start even in download mode the screen just stays black.
noting helps usb cable, loading the phone , ..
Do you have any idea how to fix this?
Click to expand...
Click to collapse
Try recovery mode, but probably it won't work neither. Try also removing sim and sdcard... In such cases, when you cannot start the phone in any mode, the Samsung service is the only solution...

ok. can it be done under warranty?
what do i say to samsungg service?

timothywer said:
Hello yesterday when i was flashing a custom ROM Odin hanged at facroryfs.rfs.
I pulled my cable out and rebooted the phone by pulling out the battery but now the phone won't start even in download mode the screen just stays black.
noting helps usb cable, loading the phone , ..
Do you have any idea how to fix this?
Click to expand...
Click to collapse
umm. i had the same prb thrice.. odin hanged.. but i ws able to start my g3 in download mode.. dunno wht hppnd to urs..

probably the bootloader wasn't flashed when i pulled the cable out.
So there is no bootloader on my device so it doesn't start

timothywer said:
ok. can it be done under warranty?
what do i say to samsungg service?
Click to expand...
Click to collapse
I guess this is covered by warranty... you can say the phone crashed after reboot or after using Kies.

hamsiro said:
I guess this is covered by warranty... you can say the phone crashed after reboot or after using Kies.
Click to expand...
Click to collapse
I can possibly purchase the phone off you. If nothing can be resolved by yourselves!

Tell samsung it crashed while updating with Kies

Related

[HELP]My phone is bricked... Am I screwed ?

I've made a HUGE mistake... I wanted to flash Abysskernel over RocketRom V4 to make a full wipe. But I've done it to fast, without looking good at what I was doing.
I've flashed CYANOGENMOD 9... And flashing has stuck. Now, I can't start my phone. No more recovery, no more download mode !!!
I think I'm screwed.
Is there a little chance to repear it without SAV ?
Thank you.
you flashed CM9 on ICS Rom...
you are screwed... the CM9 instructions clearly state to flash from GB rooted or other safe kernel
Try usb jig
Sent from my GT-N7000 using xda premium
musashiro said:
you flashed CM9 on ICS Rom...
you are screwed... the CM9 instructions clearly state to flash from GB rooted or other safe kernel
Click to expand...
Click to collapse
I know... it was a mistake, I've selected zip file too fast...It wasn't the good one :'(
zepretender said:
I know... it was a mistake, I've selected zip file too fast...It wasn't the good one :'(
Click to expand...
Click to collapse
Pull the battery, wait 30 seconds and put it back in and try to get in downloadmode.
gee2012 said:
Pull the battery, wait 30 seconds and put it back in and try to get in downloadmode.
Click to expand...
Click to collapse
No download mode... Nothing. Full black screen.
Just pull the battery wait for 10 to 15 seconds put it in volume down+home+power button for 10 seconds and again count of 10 just plug in ur usb cable and see wether the phone is detected through odin if yes and then use 16gb pit file with bootloaders and flash any stock gb rom
bhasg1007 said:
Just pull the battery wait for 10 to 15 seconds put it in volume down+home+power button for 10 seconds and again count of 10 just plug in ur usb cable and see wether the phone is detected through odin if yes and then use 16gb pit file with bootloaders and flash any stock gb rom
Click to expand...
Click to collapse
What is "16gb pit file" ??
if its totally black and you cant turn it on, you are lucky if you still have the warranty.. they cant check the flash counter...
just tell them you suddenly cant open the phone
Here's a guide. I actually used this to fix my Note and it worked.
http://www.android.gs/easily-fix-bricked-samsung-galaxy-note-n7000/
alexdumitru said:
Here's a guide. I actually used this to fix my Note and it worked.
http://www.android.gs/easily-fix-bricked-samsung-galaxy-note-n7000/
Click to expand...
Click to collapse
I can't reach Download Mode :'(
Totally black screen.
I hope that musashiro is right.
hi
i have got the same problem.
alexdumitru your problem is not same. the link you shared they mention to solve softbrick devices. but me and zepretender got a hardbrick devices. it means you can not go to download mode. so i think only they solve it with changing mainboard or damaged parts.
is there any other new ways for solve hard brick devices??
That's a hard brick too. The emmc is damaged, though it enters download mode, it's true. But I've seen cases where the device entered download mode, though the screen remained blank. So try to enter download mode, even if the screen is still blank and then connect it to the computer. If Odin recognizes it, you might be lucky.
i´ve sufferd the same problem. i´ve bricked my note - no recovery, no download mode. i tried to go to download mode, but odin didn´t recognized usb connection. My phone was dead. I´ve sent my device to samsung for warranty repair.
Hmm I didn't know that.actually I hv tried everythng but odin didn't recgnse it. I will try your suggest ofcourse.its worth to try. So whle usb cble connected should I try to go to download mode? In some topics they mentioning about use another usb cable.which is dfferent than normal ones. Do u know anythng about it?
Jig usb can open my phone in download mode? Is that works for hardbricked phones? Because Im gonna buy one.
quarkw said:
Jig usb can open my phone in download mode? Is that works for hardbricked phones? Because Im gonna buy one.
Click to expand...
Click to collapse
If your phone is "superbricked" hard brick, then a JIG won't work because it damages the eMMc chip. But, you can make your own JIG. You can get stuff at your local electronics store, like Radioshack. I don't know where you live though, haha!
Even if the JIG gets you in download mode though, if Odin fails at factoryfs.img or NAND write start then it will still be bricked.

Bricked Phone! - Dead - NEED HELP!!

Hi guys, I'm gonna tell you what happened with my S4 to see if you can help me.
I got a MetroPCS Galaxy S4 (SGH-M919N) then I went to a tech and unlocked it. After 2 days the screen started blinking in pink color and I decided to flash it with a stock ROM from T-Mobile (SGH-M919-TMB-M919UVUAMDL-1366964131) using ODIN. Everything was great, in a couple of days the screen went kinda black (No brightness at all) I could barely see it. In this state with the phone turned off and tried to plug in to the PC or charge it and started blinking in green color. I decided once again to flash it with the stock ROM mentioned above but the phone won't enter in recovery or download mode after that I tried to flash it with the CyanogenMOD Installer......everything was OK but it stuck in about 75%, left the phone connected for 20min aprox and nothing happened. I unplugged it and tried to turn it on (It vibrates but I get no startup sound, logo, boot, anything!) ODIN doesn't recognized anymore, can't enter in recovery or download.
I tried to reboot download with ADB to flash it with ODIN but usb debugging is not enabled and ADB commands doesn't work.
I don't know what to do with my S4, I hope you guys can help me. I'm not in the US so I can't return it for replacement.
I hope to hear from you soon. THANKS IN ADVANCE.
chure63 said:
Hi guys, I'm gonna tell you what happened with my S4 to see if you can help me.
I got a MetroPCS Galaxy S4 (SGH-M919N) then I went to a tech and unlocked it. After 2 days the screen started blinking in pink color and I decided to flash it with a stock ROM from T-Mobile (SGH-M919-TMB-M919UVUAMDL-1366964131) using ODIN. Everything was great, in a couple of days the screen went kinda black (No brightness at all) I could barely see it. In this state with the phone turned off and tried to plug in to the PC or charge it and started blinking in green color. I decided once again to flash it with the stock ROM mentioned above but the phone won't enter in recovery or download mode after that I tried to flash it with the CyanogenMOD Installer......everything was OK but it stuck in about 75%, left the phone connected for 20min aprox and nothing happened. I unplugged it and tried to turn it on (It vibrates but I get no startup sound, logo, boot, anything!) ODIN doesn't recognized anymore, can't enter in recovery or download.
I tried to reboot download with ADB to flash it with ODIN but usb debugging is not enabled and ADB commands doesn't work.
I don't know what to do with my S4, I hope you guys can help me. I'm not in the US so I can't return it for replacement.
I hope to hear from you soon. THANKS IN ADVANCE.
Click to expand...
Click to collapse
Is the battery working ok? Does the LED go red when charger is plugged in as normal?
What happens when you try to boot to recovery?
If your screen start blinking pink and after that turning black, why do assume it's a software problem? No rom would cause that. It's clearly a hardware failure.
RossFixxed said:
Is the battery working ok? Does the LED go red when charger is plugged in as normal?
What happens when you try to boot to recovery?
Click to expand...
Click to collapse
The battery is OK, I tested it already with another phone. The LED doesn't turn on when the charger is plugged in. When I try to enter to recovery it vibrates but nothing else happens (Black Screen).
Lennyz1988 said:
If your screen start blinking pink and after that turning black, why do assume it's a software problem? No rom would cause that. It's clearly a hardware failure.
Click to expand...
Click to collapse
The screen would cause no sound, no LED light, no download or recovery mode, etc..?
Wrong section...
Sent from my GT-I9500 using Tapatalk 4 - Hassan K. Malik
HassanM said:
Wrong section...
Sent from my GT-I9500 using Tapatalk 4 - Hassan K. Malik
Click to expand...
Click to collapse
Where should I post this? Thank you.
chure63 said:
Where should I post this? Thank you.
Click to expand...
Click to collapse
mabye try to use Odin if you can go to Download mode, try to install Android 4.3 with repartition (pit file)... Did you try? Can you go somehow to CWM? If yes, try to format EVERYTHING as possible - system, data etc. than try again method via Odin...
erikasnoske said:
mabye try to use Odin if you can go to Download mode, try to install Android 4.3 with repartition (pit file)... Did you try? Can you go somehow to CWM? If yes, try to format EVERYTHING as possible - system, data etc. than try again method via Odin...
Click to expand...
Click to collapse
I can't get into download or recovery mode.
chure63 said:
I can't get into download or recovery mode.
Click to expand...
Click to collapse
oh god, I didn't have this experience, sorry, I can't help you at all then
Jtag
Jtag?
jd1639 said:
Jtag
Click to expand...
Click to collapse
Hiya I found as a bit of a n00b Jtag painful as a senior member would there be a guide that we could learn from? I wasn't able to find one.:fingers-crossed:
Service center is better idea, since they can't go to download mode to see your phone stil got warranty or not.. just say phone dead ... while In pocket automatically
Generated by Galaxy S4® Octa-Core™ Black-Mambo , Signature not required.©
jd1639 said:
Jtag
Click to expand...
Click to collapse
I don't know much about it. Which box will be helpful to debrick it? Thanks.
chure63 said:
I don't know much about it. Which box will be helpful to debrick it? Thanks.
Click to expand...
Click to collapse
Google mobiletechvideos
Sent from my Nexus 5 using xda app-developers app
95mediatech said:
Service center is better idea, since they can't go to download mode to see your phone stil got warranty or not.. just say phone dead ... while In pocket automatically
Generated by Galaxy S4® Octa-Core™ Black-Mambo , Signature not required.©
Click to expand...
Click to collapse
I'm not in the US....
chure63 said:
I'm not in the US....
Click to expand...
Click to collapse
You don't have to be in the US, it's just going to cost you more in shipping. Maybe you can find someone in your country that can jtag. Try some of the local phone repair shops.
Sent from my Nexus 5 using xda app-developers app
Have you tryed it?
http://forum.xda-developers.com/showthread.php?t=2265477
At the bottom there are some information "how to revive bricked device". Have you tryed it?

LG Flash Tool crashed while flashing, phone bricked

Hi,
I was about flashing stock rom (following this thread and using CSE Flashing mode), when suddenly LG Flash Tool crashed on windows (I hate windows). Flashing progress stuck at 16%, so I press and hold power button to power phone off. but when I tried to enter to Download Mode, phone start too boot, and after LG logo, screen keeps going on and off (showing black screen)
I tried to enter to recover or factory hard reset, but it going to Factory data reset, even if I confirm reseting data it would try to boot same as when I tried to get Download Mode.
adb does not work
I followed this thread, but /dev/sdb1..36 just available for a few second and then disappear, after a while they are available and then disappear, and this will going on, (I think this is related to that screen on and off thing)
Would someone help me?
Sorry for my bad english, I'm a little nervous right now
Ok, finally I could see sdb1...36 and do what have been said here, and now I stuck at LG logo at boot.
still cannot get the download mode
factory hard reset is back but it'll stuck at "Factory reset processing..."
I have really lost my respect to flashtool after this kind of errors. If someone solve that issue it would be great for our community
please help
IM SORRY
we have the same scenario before, identically as yours.. and im sorry to tell you that you bricked your G2 so bad. i need to take mine to service center and they said that it needs the board to be replace, luckily im still on warranty. hope you still have yours as well
berceniqgil said:
we have the same scenario before, identically as yours.. and im sorry to tell you that you bricked your G2 so bad. i need to take mine to service center and they said that it needs the board to be replace, luckily im still on warranty. hope you still have yours as well
Click to expand...
Click to collapse
Yes I'm still have warranty.
But I hope I can fix it myself
Mine just got this issue too. Repair center denied the phone for repairs, claiming it is user damage.
So yup, I have a neat paperweight now.
berceniqgil said:
we have the same scenario before, identically as yours.. and im sorry to tell you that you bricked your G2 so bad. i need to take mine to service center and they said that it needs the board to be replace, luckily im still on warranty. hope you still have yours as well
Click to expand...
Click to collapse
Zulake said:
Mine just got this issue too. Repair center denied the phone for repairs, claiming it is user damage.
So yup, I have a neat paperweight now.
Click to expand...
Click to collapse
Somewhere in the forum i saw that you can detect your phone as a adb device on ubuntu or etc. Have you tried that? Im really feeling sorry about hearing that issue. As advice use old flashtool method that is harder but safer
abdulkadiro said:
Somewhere in the forum i saw that you can detect your phone as a adb device on ubuntu or etc. Have you tried that? Im really feeling sorry about hearing that issue. As advice use old flashtool method that is harder but safer
Click to expand...
Click to collapse
Ubuntu is running in a VM, so I would need Windows to find the phone first.
Unfortunately, Windows never sees the phone.
It's weird though. TWRP got successfully flashed during the QHSUSB_BULK guide method, but I cannot boot into it.
Zulake said:
Ubuntu is running in a VM, so I would need Windows to find the phone first.
Unfortunately, Windows never sees the phone.
It's weird though. TWRP got successfully flashed during the QHSUSB_BULK guide method, but I cannot boot into it.
Click to expand...
Click to collapse
Maybe you had a bad download try an another base
abdulkadiro said:
Maybe you had a bad download try an another base
Click to expand...
Click to collapse
I lost QHSUSB_BULK mode now, the PC won't see the phone anymore and all modes are gone.
No download mode, no recovery, no ADB, no fastboot, factory reset freezes, nothing works.
Zulake said:
I lost QHSUSB_BULK mode now, the PC won't see the phone anymore and all modes are gone.
No download mode, no recovery, no ADB, no fastboot, factory reset freezes, nothing works.
Click to expand...
Click to collapse
If you see the lg logo maybe you will have a change. A guy who had the same results like you brings his phone plugged for 10-15 minutes than he have find his phone in download mode. Of course he plug the cable while holding the down button. I hope you will get your phone back with its functions
abdulkadiro said:
If you see the lg logo maybe you will have a change. A guy who had the same results like you brings his phone plugged for 10-15 minutes than he have find his phone in download mode. Of course he plug the cable while holding the down button. I hope you will get your phone back with its functions
Click to expand...
Click to collapse
Well, that's worth the try.
I just connected it while holding volume up.
Hopefully it will still charge when connected.
//Well, it's been about 15 minutes now and it still displays the LG logo.
Guess I'm outta luck on this one.
Zulake said:
Somewhere in the forum i saw that you can detect your phone as a adb device on ubuntu or etc. Have you tried that? Im really feeling sorry about hearing that issue. As advice use old flashtool method that is harder but safer
Click to expand...
Click to collapse
I tried that on my ubuntu laptop, ubuntu did not detect the phone
Zulake said:
Well, that's worth the try.
I just connected it while holding volume up.
Hopefully it will still charge when connected.
//Well, it's been about 15 minutes now and it still displays the LG logo.
Guess I'm outta luck on this one.
Click to expand...
Click to collapse
I read this post one more time, this guy who had download mode after 10-15 minute, have discharged the phone then do what he said. have you try that?
I have discharged my phone, but I'm going to work right now, later today I will try and let you know if it was fixed or not
Behzadsh said:
I tried that on my ubuntu laptop, ubuntu did not detect the phone
I read this post one more time, this guy who had download mode after 10-15 minute, have discharged the phone then do what he said. have you try that?
I have discharged my phone, but I'm going to work right now, later today I will try and let you know if it was fixed or not
Click to expand...
Click to collapse
I won't dare doing that, as it doesn't seem to charge anymore.
I'm gonna retry sending it in today, otherwise it's going into the bin.
I tried one more time last night when phone was fully discharged. nothing has been changed.
Zulake said:
I won't dare doing that, as it doesn't seem to charge anymore.
I'm gonna retry sending it in today, otherwise it's going into the bin.
Click to expand...
Click to collapse
Hopefully it start charging.

Need Help!! my sm-n9005 can't access to recovery and bootloop with 2 vibrations

Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.
rodyrach said:
Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.
Click to expand...
Click to collapse
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?
devilsdouble said:
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?
Click to expand...
Click to collapse
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen
rodyrach said:
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen
Click to expand...
Click to collapse
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.
devilsdouble said:
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.
Click to expand...
Click to collapse
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817
rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
hi, your problems are resolved?
devilsdouble said:
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817
Click to expand...
Click to collapse
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.
Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.
rodyrach said:
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.
Click to expand...
Click to collapse
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging
cryostasis25 said:
Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.
Click to expand...
Click to collapse
Hi i have already use pit file with stock rom via odin. same result. bootloop at the logo.
rodyrach said:
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging
Click to expand...
Click to collapse
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.
devilsdouble said:
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.
Click to expand...
Click to collapse
My phone dont show up on ADB.
rodyrach said:
My phone dont show up on ADB.
Click to expand...
Click to collapse
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.
devilsdouble said:
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.
Click to expand...
Click to collapse
My problem not solved
rodyrach said:
My problem not solved
Click to expand...
Click to collapse
Flash official lollipop poland done! still bootloop at "samsung galaxy note 3 sm-n9005".
can't access to recovery mode but download mode still working!
before to sleep i left the charger connected to the phone still bootloop until the morning and BANG i waked up saw lollipop samsung logo and blue led!
screen stucked at lollipop samsung logo!
i turned off the phone left in charge ( normal charge with animation in green battery, thing that did not before because as soon as I connected the charger to the phone it tried to boot and reboot all time after e few seconds with 2 vibrations) and gone to work.
go back home battery charged at 100%, tried to boot in recovery mode and it working!
i performed a wipe data factory reset and wipe cache partition and BANG my note 3 booted normally.
done a few hours and it works very well.
Thanks to all for your supports.
Really weird i don't understand whats happened during the night.
But im so glad .

Recovery is not Seandroid Enforcing Odin isn’t detecting my phone, any suggestions?

Recovery is not Seandroid Enforcing Odin isn’t detecting my phone, any suggestions?
I successfully rooted my phone and was trying to install the exposed framework and i guess downloaded the wrong one. When i flashed it i ended up getting into boot loop. I am on N910F with the 2 Network.
I have tried factory resetting with the caches but to no avail. The only other option i found was Odin, the problem is Odin is not detecting my phone when in recovery mode but seems to have no problem coming blue when starting up giving the 3 logo startup which just goes when it start looping again. I have tried 2 computers, a different cable although old and all my USB ports and the same thing keeps happening. I have already reinstalled Samsung USB Drivers times. I am wondering if they are any others.
Please Help
Note44 said:
I successfully rooted my phone and was trying to install the exposed framework and i guess downloaded the wrong one. When i flashed it i ended up getting into boot loop. I am on N910F with the 2 Network.
I have tried factory resetting with the caches but to no avail. The only other option i found was Odin, the problem is Odin is not detecting my phone when in recovery mode but seems to have no problem coming blue when starting up giving the 3 logo startup which just goes when it start looping again. I have tried 2 computers, a different cable although old and all my USB ports and the same thing keeps happening. I have already reinstalled Samsung USB Drivers times. I am wondering if they are any others.
Please Help
Click to expand...
Click to collapse
are u sure ur phones usb port is working? did u connected another phone to the pc?
Note44 said:
I successfully rooted my phone and was trying to install the exposed framework and i guess downloaded the wrong one. When i flashed it i ended up getting into boot loop. I am on N910F with the 2 Network.
I have tried factory resetting with the caches but to no avail. The only other option i found was Odin, the problem is Odin is not detecting my phone when in recovery mode but seems to have no problem coming blue when starting up giving the 3 logo startup which just goes when it start looping again. I have tried 2 computers, a different cable although old and all my USB ports and the same thing keeps happening. I have already reinstalled Samsung USB Drivers times. I am wondering if they are any others.
Please Help
Click to expand...
Click to collapse
Are you connecting phone to Odin in Recovery mode or you mean to say download mode. You should put phone in download mode For connecting to Odin.
Ram121 said:
Are you connecting phone to Odin in Recovery mode or you mean to say download mode. You should put phone in download mode For connecting to Odin.
Click to expand...
Click to collapse
Ram121 said:
Are you connecting phone to Odin in Recovery mode or you mean to say download mode. You should put phone in download mode For connecting to Odin.
Click to expand...
Click to collapse
Thank you,
I just figured that out from some genius from Reddit Not 4 Thread. I guess the guy in the YouTube tutorial accidentally said "hold volume up" and so did everyone else I happened to come across which ended up wasting me a lot of time.
That was so lucky, because I really would have done some crazy stuff I didn't know about.
Thank you so much for taking the time to reply. Maybe I should contact the guy from YouTube to add an annotation or something.
shahram Ali said:
are u sure ur phones usb port is working? did u connected another phone to the pc?
Click to expand...
Click to collapse
Yes it was, the problem was I was given a bad tutorial and told to hold "volume up" to go into TWRP recovery instead of "Volume Down" into downloader.
Everything is working great now and my phone is working again.
Thank you for taking the time to reply. It's genuine people like you that make the internet great!
Note44 said:
Yes it was, the problem was I was given a bad tutorial and told to hold "volume up" to go into TWRP recovery instead of "Volume Down" into downloader.
Everything is working great now and my phone is working again.
Thank you for taking the time to reply. It's genuine people like you that make the internet great!
Click to expand...
Click to collapse
congratulations bro im happy cause ur phone fixed :victory:

Categories

Resources