Hello,
I have a SAMSUNG GALAXY S6 EDGE+ which is not able to boot anymore and contains precious data which I desperately want to recover (images and text messages).
If I let the phone boot normally I got a blank screen (white)
If I press Volume Low + Home + Power the phone directly enter DOWNLOAD MODE,
with de following information on the upper left corner:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G928F
CA_ TYPE: CA_3
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FAP LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 0 (0x0000)
AP SWREV: B:5 K:0 S:1
On the middle of the screen I can read
Downloading...
Do not turn off target
I never unlocked the boot-loader and/or installed custom recovery on this phone
I tried to :
Unlock boot-loader with Heimdall (or odin), in order to install TWRP
Problem: the phone is not in developer mode, so Heimdall failed to unlock the boot-loader
Recover data using Fone Paw for Android (trial 30 days version)
My phone model (SM-G928F) is not listed in the phone model list
It doesn't look like Fone Paw is able to access the device if I choose another phone model
I didn't try to :
Re-install stock Samsung-OS using ODIN
I'm afraid this will erase the data on the phone
I would appreciate if someone with some experiences on the subject could give me some advices here, what are my options to recover the data ?
Thanks for your help,
Regards,
Related
could not do normal boot.
ODIN MODE.
Product name: SM-N9006
Current Binary: Custom
Reactivitation lock(KK): OFF
KNOX KEANEL LOCK : 0X 0
KNOX WARRANTY VOID : 0 X1
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWAEV: S2, T2, R2, A3, P2
WRITE PROTECTION : Enable
UBC START
Downloading....
Do not turn off target
- download KINGO to root it, and it show success
- download root checker shown not rooted
- then download odin ver 3.7 and tried to do that and failed
- then it came to recovery mode, I press wipe all data and then reboot
- then shown firmware upgrade, and use kies
- I use kies but cannot detect this phone
- then use odin ver 3.9 and now it became this
then i restart and battery take out , and for whole day.. no seem to load.
and
i tried using pressing VOL DOWN + HOME + POWER
it came to Chinese wording.. with WARNING
. (I TRANSLATE IN ENGLISH AS WRITTEN IN CHINESE)
custom , modify or downloading can cause great problem to the software function.
if required our technical support, required to pay.
if you insist want to download default system function, please
VOL UP , if not VOL DOWN to cancel.
VOL UP
: CONTINUE
VOL DOWN
: CANCEL ( RECOVERY)
anyone can help, i', reside in Singapore and this is a china NOTE 3,
and the version is 4.42 KIT KAT version.
MODEL : NOTE 3, SM-N9
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
ODIN MODE ( Could not do normal boot) SM9006
could not do normal boot.
ODIN MODE.
Product name: SM-N9006
Current Binary: Custom
Reactivitation lock(KK): OFF
KNOX KEANEL LOCK : 0X 0
KNOX WARRANTY VOID : 0 X1
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWAEV: S2, T2, R2, A3, P2
WRITE PROTECTION : Enable
UBC START
Downloading....
Do not turn off target
- download KINGO to root it, and it show success
- download root checker shown not rooted
- then download odin ver 3.7 and tried to do that and failed
- then it came to recovery mode, I press wipe all data and then reboot
- then shown firmware upgrade, and use kies
- I use kies but cannot detect this phone
- then use odin ver 3.9 and now it became this
then i restart and battery take out , and for whole day.. no seem to load.
and
i tried using pressing VOL DOWN + HOME + POWER
it came to Chinese wording.. with WARNING
. (I TRANSLATE IN ENGLISH AS WRITTEN IN CHINESE)
custom , modify or downloading can cause great problem to the software function.
if required our technical support, required to pay.
if you insist want to download default system function, please
VOL UP , if not VOL DOWN to cancel.
VOL UP
: CONTINUE
VOL DOWN
: CANCEL ( RECOVERY)
once I press UP , this came to ODIN MODE page without could not do normal boot.
but it cannot not loading. and struck at the page..
I tried to press again with VOL UP + HOME + POWER
it came to this page
Andriod. system recovery <3E>
KOT49.HN9006ZNUENH1
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
below written
#MANUAL MODE #
--Appling Multi-CSC...
Applied the CSC-code : CHN
Successfully applied multi-CSC.[?COLOR]
anyone can help, i reside in Singapore and this is a china NOTE 3,
and the version is 4.42 KIT KAT version.
MODEL : NOTE 3, SM-N9
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
MODEL: NOTE 3 SM-N9006
CHINA NOTE 3
VERSION: KITKAT 4.4.2
and I tried download kies in Singapore, US and even China ..cannot detect,
whatever I tried, it automatically came to the odin mode cannot do normal reboot.
and in recovery mode I pressed VOL UP + HOME + POWER still go back to odin mode...
anyone can help me with it.
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
[/QUOTE]
ciny said:
could not do normal boot.
ODIN MODE.
Product name: SM-N9006
Current Binary: Custom
Reactivitation lock(KK): OFF
KNOX KEANEL LOCK : 0X 0
KNOX WARRANTY VOID : 0 X1
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWAEV: S2, T2, R2, A3, P2
WRITE PROTECTION : Enable
UBC START
Downloading....
Do not turn off target
- download KINGO to root it, and it show success
- download root checker shown not rooted
- then download odin ver 3.7 and tried to do that and failed
- then it came to recovery mode, I press wipe all data and then reboot
- then shown firmware upgrade, and use kies
- I use kies but cannot detect this phone
- then use odin ver 3.9 and now it became this
then i restart and battery take out , and for whole day.. no seem to load.
and
i tried using pressing VOL DOWN + HOME + POWER
it came to Chinese wording.. with WARNING
. (I TRANSLATE IN ENGLISH AS WRITTEN IN CHINESE)
custom , modify or downloading can cause great problem to the software function.
if required our technical support, required to pay.
if you insist want to download default system function, please
VOL UP , if not VOL DOWN to cancel.
VOL UP
: CONTINUE
VOL DOWN
: CANCEL ( RECOVERY)
anyone can help, i', reside in Singapore and this is a china NOTE 3,
and the version is 4.42 KIT KAT version.
MODEL : NOTE 3, SM-N9
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
Click to expand...
Click to collapse
G'day
I had the exact same issue with my SM-G900I. With the suggestion from an XDA senior; Try flashing with stock firmware from samsmobile.com for your particular model with Odin.
Trying this suggestion as I respond to your predicament. Shall keep you posted on the outcome.
Peace. :what:
Sent from my PNDPP47GP using XDA Free mobile app
I wanted to reset my rooted device after I had format it into boot it into recovery mode, but I had forgot to turn off the OEM unlock and now I can ONLY access download mode.
HELP!!!!!
Flash stock firmware.
Naked Snake 7575 said:
I wanted to reset my rooted device after I had format it into boot it into recovery mode, but I had forgot to turn off the OEM unlock and now I can ONLY access download mode.
HELP!!!!!
Click to expand...
Click to collapse
I have the a problem that I install other TWRP custom rom and now when I turn the phone gets stuck on a screen that says:
Odin mode (written in red letters)
Product Name: Smg360t1
Current binary: Custom
System status: Custom
Fap lock: off
Qualcomm secureboot: Enable (CSB)
rp swrev: s1, t1, h1, r1, a11, p1
Secure download: enable (written in blue letters).
But the android as it should (I guess) does not appear and can not find the way to fix it
I only have 2 days with the phone and then this . I am a newbie on this field so that may explain why I failed
Can somebody help me? I really would appreciate the help
https://samsung-firmware.org/download/GALAXY CORE PRIME/9q9f/TMB/G360T1UVU1AOFA/G360T1TMB1AOFA/
Download the file abobe extract the file.
Do the rest of things. Best of luck
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
@MrBl4ckSh33p
It happened to me to, install samsung kies and restore the firmware
Sent from my Samsung SM-G361F using XDA Labs
Good evening!
This is my first post and I would get a fix on my device, if is possible.
I found every kind of tutorial to flash this device.
I used differents version of Odin with no success
My device is:
Samsung Galaxy A7 SM-A700F
In ODIN MODE appear those details:
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID: 1
RP SWREP: 2
I tried to put into this device Android 4.4 (original rom) and the last one.
I can access only on Download Mode, but not in Recovery Mode... I would make a wipecache, or reset nand, but I can't get into Recovery Mode.
I bought online as not working phone, so I don't know what can I do on it.... Could be bricked?
Hi all,
Please bear with me, I'm in way over my head here and don't understand most of what I've done. I was experimenting when I probably shouldn't have been.
So, I installed DarkLord's Note 7 kernel and rom. I found it to be quite buggy and am now wanting to wipe my phone and install Phronesis-N9005-N7-v6.0.
Problem is, when trying to boot into TWRP, I'm met with the the following:
ODIN MODE
Product name: SM-N9005
Current binary: Custom
System status: Official
Reactivation lock(kk): Off
Knox Kernel lock: 0x0
Knox warranty void: 0x1
Qualcomm secureboot: Enable (csb)
Rp swrev: S2, T2, R2, A3, P3
Write protection: Enable
UDC start
Downloading...
Do not turn off target
I've had it on for hours and it didn't do anything.
I managed to reboot it and it ran as it did before, in Darklords rom.
I read I have to install the official firmware and install it via Odin but I can't find anything about my device. On the back of it, it says:
SM N9005
FCC ID - A3LSMN9005
SNN - N9005GSMH
When I enter it into sammobile, nothing comes up.
Have I got this wrong? Should I be looking for something else?
You are booting to download mode not recovery .
Boot to recovery TWRP
#N9005 model firmware are on sammobile etc.
https://forum.xda-developers.com/galaxy-note-3/general/samsung-galaxy-note-3-sticky-roll-t3237249
Booting into recovery via TWRP manager just results in the same Odin screen for me
As for the firmware - I'm not really sure which region I should pick out of those. I just thought this was an international model, but then I downloaded an app called Phone INFO and it tells me it's Vietnam. Could this be because of the rom already on there? It does also say it's a Note 7, so I'm assuming it's incorrect.
TWRP manager
DO NOT USE just boot to recovery via the vol up home and power buttons as normal .
Copy Phronesis to ext sd card and flash as per instructions .
You have N9005 Pick your area /network where you are .
Phone Info can only go by what's on your phone and you flashed DarkLord's Note 7 firmware .
Booting via manager was a last resort. I was trying the usual way and it also resulting in the same thing.
Boot to download/ Odin mode flash stock rom .
Thanks JJEgan, I figured out how to use Odin3 and Odin mode, then install Phronesis. All is good now
Hi and thanks for reading this,
I received a SM-T580 from my grandson, he was playing with it experimenting some hacking
but seems he bricked the tablet , and I do not know what he was trying to do,
and in fact he does not know either.
Now i'm in a situation that the tablet does not boot, can not power off, it just goes straight to downloading page,
and I can go to odin mode pressing home, vol- and power.
In odin mode I have:
download speed: fast
product name: sm-t580
current binary: samsung official
system status: custom
reactivation lock: off
crom service: on
secure download: enabled
warranty void: 0 (0x000)
rp swrev: b:6 k:3 s:4
I have try to install stock firmware but i got bootloader error,
in fact the newest firmware has bootloader 5,
installing only AP stops at system.img after few seconds.
I do not know how to go out from this situation,
just hope in your help.
many thanks
old uncle
fixed by @hainguyenthao