could not do normal boot.
ODIN MODE.
Product name: SM-N9006
Current Binary: Custom
Reactivitation lock(KK): OFF
KNOX KEANEL LOCK : 0X 0
KNOX WARRANTY VOID : 0 X1
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWAEV: S2, T2, R2, A3, P2
WRITE PROTECTION : Enable
UBC START
Downloading....
Do not turn off target
- download KINGO to root it, and it show success
- download root checker shown not rooted
- then download odin ver 3.7 and tried to do that and failed
- then it came to recovery mode, I press wipe all data and then reboot
- then shown firmware upgrade, and use kies
- I use kies but cannot detect this phone
- then use odin ver 3.9 and now it became this
then i restart and battery take out , and for whole day.. no seem to load.
and
i tried using pressing VOL DOWN + HOME + POWER
it came to Chinese wording.. with WARNING
. (I TRANSLATE IN ENGLISH AS WRITTEN IN CHINESE)
custom , modify or downloading can cause great problem to the software function.
if required our technical support, required to pay.
if you insist want to download default system function, please
VOL UP , if not VOL DOWN to cancel.
VOL UP
: CONTINUE
VOL DOWN
: CANCEL ( RECOVERY)
anyone can help, i', reside in Singapore and this is a china NOTE 3,
and the version is 4.42 KIT KAT version.
MODEL : NOTE 3, SM-N9
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
ODIN MODE ( Could not do normal boot) SM9006
could not do normal boot.
ODIN MODE.
Product name: SM-N9006
Current Binary: Custom
Reactivitation lock(KK): OFF
KNOX KEANEL LOCK : 0X 0
KNOX WARRANTY VOID : 0 X1
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWAEV: S2, T2, R2, A3, P2
WRITE PROTECTION : Enable
UBC START
Downloading....
Do not turn off target
- download KINGO to root it, and it show success
- download root checker shown not rooted
- then download odin ver 3.7 and tried to do that and failed
- then it came to recovery mode, I press wipe all data and then reboot
- then shown firmware upgrade, and use kies
- I use kies but cannot detect this phone
- then use odin ver 3.9 and now it became this
then i restart and battery take out , and for whole day.. no seem to load.
and
i tried using pressing VOL DOWN + HOME + POWER
it came to Chinese wording.. with WARNING
. (I TRANSLATE IN ENGLISH AS WRITTEN IN CHINESE)
custom , modify or downloading can cause great problem to the software function.
if required our technical support, required to pay.
if you insist want to download default system function, please
VOL UP , if not VOL DOWN to cancel.
VOL UP
: CONTINUE
VOL DOWN
: CANCEL ( RECOVERY)
once I press UP , this came to ODIN MODE page without could not do normal boot.
but it cannot not loading. and struck at the page..
I tried to press again with VOL UP + HOME + POWER
it came to this page
Andriod. system recovery <3E>
KOT49.HN9006ZNUENH1
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
below written
#MANUAL MODE #
--Appling Multi-CSC...
Applied the CSC-code : CHN
Successfully applied multi-CSC.[?COLOR]
anyone can help, i reside in Singapore and this is a china NOTE 3,
and the version is 4.42 KIT KAT version.
MODEL : NOTE 3, SM-N9
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
MODEL: NOTE 3 SM-N9006
CHINA NOTE 3
VERSION: KITKAT 4.4.2
and I tried download kies in Singapore, US and even China ..cannot detect,
whatever I tried, it automatically came to the odin mode cannot do normal reboot.
and in recovery mode I pressed VOL UP + HOME + POWER still go back to odin mode...
anyone can help me with it.
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
[/QUOTE]
ciny said:
could not do normal boot.
ODIN MODE.
Product name: SM-N9006
Current Binary: Custom
Reactivitation lock(KK): OFF
KNOX KEANEL LOCK : 0X 0
KNOX WARRANTY VOID : 0 X1
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWAEV: S2, T2, R2, A3, P2
WRITE PROTECTION : Enable
UBC START
Downloading....
Do not turn off target
- download KINGO to root it, and it show success
- download root checker shown not rooted
- then download odin ver 3.7 and tried to do that and failed
- then it came to recovery mode, I press wipe all data and then reboot
- then shown firmware upgrade, and use kies
- I use kies but cannot detect this phone
- then use odin ver 3.9 and now it became this
then i restart and battery take out , and for whole day.. no seem to load.
and
i tried using pressing VOL DOWN + HOME + POWER
it came to Chinese wording.. with WARNING
. (I TRANSLATE IN ENGLISH AS WRITTEN IN CHINESE)
custom , modify or downloading can cause great problem to the software function.
if required our technical support, required to pay.
if you insist want to download default system function, please
VOL UP , if not VOL DOWN to cancel.
VOL UP
: CONTINUE
VOL DOWN
: CANCEL ( RECOVERY)
anyone can help, i', reside in Singapore and this is a china NOTE 3,
and the version is 4.42 KIT KAT version.
MODEL : NOTE 3, SM-N9
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
Click to expand...
Click to collapse
G'day
I had the exact same issue with my SM-G900I. With the suggestion from an XDA senior; Try flashing with stock firmware from samsmobile.com for your particular model with Odin.
Trying this suggestion as I respond to your predicament. Shall keep you posted on the outcome.
Peace. :what:
Sent from my PNDPP47GP using XDA Free mobile app
Related
What should I do to really have a " completely rooted N9005" ???
I need some suggestion of the "experts" about the fact that my SM-N9005 , that " seems to be rooted " ( and this is confirmed launching the app " root checker" and obtaining the result " This device has root access" ...) ...but , despite this apparent status , it provides me the following issues :
a) I cannot use CWM mode to flash any new ROM nor any other patch using .zip file ; when I try to do a flash , using the option " apply update from external storage" as in this options list :
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
it seems to start to flash but after few seconds I obtain a RED message in the bottom oif the page , like :
" E:signature verification failed"
and in yellow
--Appling Multi-CSC ...
Applied the CSC-code : XTC
Successfully applied multi-CSC
install from sdcard complete
But in reality anything happen , the sistuation is exactly the same as before ...
b) I cannot do any back up ( EFS nor other kind of back up ) ; so , every time I try to flash even using MOP ( it works, but even MOP seems to have some problem..) I get a new ROM installed but with problems... sometime the phone is blocked with the " samsung logo and the Blue led" and I need to restert it with ODIN .....and I need to reinstall all in manual mode
in order to provide to the experts additional info , here are other details
AP : N9005XXUDMJ7
CP: N9005XXUDMJ7
CSC : N9005XXDMJ4
kernel 3.4.0-201940
[email protected]#1
Wed Oct 30 16:51 ....
Build version
JSS15J.N9005XXUDMJ7
in download mode:
ODIN MODE (in red)
Product name : SM-9005
Current Binary : Samsung Official
System Status : Custom
Reacxtivation lock : OFF
KNOX KERNEL LOCK : 0x0
KNOX WARRANTY VOID : 0x1
Qualcom secureboot : NONE
AP SWREV : S2,T2,R2,A2,P8
Write protection : Enable
I would invite everybody able to provide any suggestion to propose some verification or even ask me any additional info to find the way to use a rooted phone as was used to do with other phones before = flash roms without this problem
Thanks in advance for any contribution
tower5 said:
What should I do to really have a " completely rooted N9005" ???
I need some suggestion of the "experts" about the fact that my SM-N9005 , that " seems to be rooted " ( and this is confirmed launching the app " root checker" and obtaining the result " This device has root access" ...) ...but , despite this apparent status , it provides me the following issues :
a) I cannot use CWM mode to flash any new ROM nor any other patch using .zip file ; when I try to do a flash , using the option " apply update from external storage" as in this options list :
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
it seems to start to flash but after few seconds I obtain a RED message in the bottom oif the page , like :
" E:signature verification failed"
and in yellow
--Appling Multi-CSC ...
Applied the CSC-code : XTC
Successfully applied multi-CSC
install from sdcard complete
But in reality anything happen , the sistuation is exactly the same as before ...
b) I cannot do any back up ( EFS nor other kind of back up ) ; so , every time I try to flash even using MOP ( it works, but even MOP seems to have some problem..) I get a new ROM installed but with problems... sometime the phone is blocked with the " samsung logo and the Blue led" and I need to restert it with ODIN .....and I need to reinstall all in manual mode
in order to provide to the experts additional info , here are other details
AP : N9005XXUDMJ7
CP: N9005XXUDMJ7
CSC : N9005XXDMJ4
kernel 3.4.0-201940
[email protected]#1
Wed Oct 30 16:51 ....
Build version
JSS15J.N9005XXUDMJ7
in download mode:
ODIN MODE (in red)
Product name : SM-9005
Current Binary : Samsung Official
System Status : Custom
Reacxtivation lock : OFF
KNOX KERNEL LOCK : 0x0
KNOX WARRANTY VOID : 0x1
Qualcom secureboot : NONE
AP SWREV : S2,T2,R2,A2,P8
Write protection : Enable
I would invite everybody able to provide any suggestion to propose some verification or even ask me any additional info to find the way to use a rooted phone as was used to do with other phones before = flash roms without this problem
Thanks in advance for any contribution
Click to expand...
Click to collapse
try this flash with odin http://forum.xda-developers.com/showthread.php?t=2567283
I does not work.....
jaythenut said:
try this flash with odin http://forum.xda-developers.com/showthread.php?t=2567283
Click to expand...
Click to collapse
first of all , thanks for your support
but I tried , without success , to flash this with odin ; ( I used odin 3.04 ) ; it remains " waiting" for a very long time ( 15 minutes..) without any action , any flash....
I did the test twice, same result....
Any other suggestion?
what could I do to do a deep cleaning of some wrong setting ?
tower5 said:
first of all , thanks for your support
but I tried , without success , to flash this with odin ; ( I used odin 3.04 ) ; it remains " waiting" for a very long time ( 15 minutes..) without any action , any flash....
I did the test twice, same result....
Any other suggestion?
what could I do to do a deep cleaning of some wrong setting ?
Click to expand...
Click to collapse
Strange that your phone shows "Qualcomm Secureboot: None"
In other phones it should be "Qualcomm Secureboot: Enable (CSB)"
tower5 said:
...
in download mode:
ODIN MODE (in red)
Product name : SM-9005
Current Binary : Samsung Official
System Status : Custom
Reacxtivation lock : OFF
KNOX KERNEL LOCK : 0x0
KNOX WARRANTY VOID : 0x1
Qualcom secureboot : NONE
AP SWREV : S2,T2,R2,A2,P8
Write protection : Enable
...
Click to expand...
Click to collapse
Your phone seems to have a peculiar setting on secureboot + SWREV configuration, and also seems to be on the (original ?) XTC (Philippines) CSC.
One of the things that I would try (given that your knox is already 0x1) would be to change CSC and write BTU MI7 firmware (and eventually check if CSC actually changed from XTC to BTU). After that you should try again writing Philz recovery.
Another thing to check would be your current bootloader version (and also the bootloader after you write BTU MI7 firmware), the command in adb is:
adb shell getprop ro.boot.bootloader
(or just "getprop ro.boot.bootloader" in a terminal prompt directly on the phone).
I found the solutions !!!!
xclub_101 said:
Your phone seems to have a peculiar setting on secureboot + SWREV configuration, and also seems to be on the (original ?) XTC (Philippines) CSC.
One of the things that I would try (given that your knox is already 0x1) would be to change CSC and write BTU MI7 firmware (and eventually check if CSC actually changed from XTC to BTU). After that you should try again writing Philz recovery.
Another thing to check would be your current bootloader version (and also the bootloader after you write BTU MI7 firmware), the command in adb is:
adb shell getprop ro.boot.bootloader
(or just "getprop ro.boot.bootloader" in a terminal prompt directly on the phone).
Click to expand...
Click to collapse
the solution was :: " apply " what is indicated in this post
http://forum.xda-developers.com/showthread.php?t=2567133
tower5 said:
the solution was :: " apply " what is indicated in this post
http://forum.xda-developers.com/showthread.php?t=2567133
Click to expand...
Click to collapse
Interesting, what firmware do you have now? And how are the switches listed in download mode? And what CSC do you have now? Do you have your IMEI back and is the phone registered on the network (and you can make/receive calls)? Is WiFi also working OK?
Good day!
I have the Model Samsung Galaxy Prime (SM-G531F). I rooted it and it was successfully done. But I have found out a problem so I decided to re flash it it the original stock rom. I have tried it using Odin. but then when I start, it always shows fail and now. My phone said "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I cant really flash it using Odin and can't also fix using Kies. Can someone help me please? Thank you very much in advance.
Did you made a backup for before flashing??
Download another compatible frimware from sammobile.com
Envoyé de mon SM-G531F en utilisant Tapatalk
Pls help me
My mobile is samsung Sm-G531y model
My mobile phone can't switch on, but when I connect USB charger Automatically comes odin mode like this below?
No image: warningmessage.jpg
No image: download_image.jpg
Odin mode (multi core download)
Product name :Sm-G531y
Current binary:samsung official
System status :custom
FRB lock : Off
Knox warrenty void:0x0
Secure download:enable
RB swrev: s0 L0 M0
soundarmelur said:
My mobile is samsung Sm-G531y model
My mobile phone can't switch on, but when I connect USB charger Automatically comes odin mode like this below?
No image: warningmessage.jpg
No image: download_image.jpg
Odin mode (multi core download)
Product name :Sm-G531y
Current binary:samsung official
System status :custom
FRB lock : Off
Knox warrenty void:0x0
Secure download:enable
RB swrev: s0 L0 M0
Click to expand...
Click to collapse
Can you get into download mode? Home + Volume Down + Power.
If yes reflash your firmware with Odin. If not, post here with any errors that have shown up and I'll help with what I can
Thank you for your reply
Maybe my is already in (odin mode)
But tried vol+home+power buttons not response in display
But only when connect USB charger it's automatically display that odin download mode
And
I tried to flash odin mode but it's faild
soundarmelur said:
Thank you for your reply
Maybe my is already in (odin mode)
But tried vol+home+power buttons not response in display
But only when connect USB charger it's automatically display that odin download mode
And
I tried to flash odin mode but it's faild
Click to expand...
Click to collapse
This will sound counter intuitive, but try removing the battery and then attaching it to your computer, I've had varied success with this.
That's all I can think of, if Odin and keis can't connect, maybe you could try a jtag at a technician
My mobile is samsung Sm-G531y model
My mobile phone can't switch on, but when I connect USB charger Automatically shows this message only
No image: warningmessage.jpg
No image: download_image.jpg
Odin mode (multi core download)
Product name :Sm-G531y
Current binary:samsung official
System status :custom
FRB lock : Off
Knox warrenty void:0x0
Secure download:enable
RB swrev: s0 L0 M0
no power+volume+home button works
aman5161 said:
My mobile is samsung Sm-G531y model
My mobile phone can't switch on, but when I connect USB charger Automatically shows this message only
No image: warningmessage.jpg
No image: download_image.jpg
Odin mode (multi core download)
Product name :Sm-G531y
Current binary:samsung official
System status :custom
FRB lock : Off
Knox warrenty void:0x0
Secure download:enable
RB swrev: s0 L0 M0
no power+volume+home button works
Click to expand...
Click to collapse
It sounds to me that your bootloader is broken:
No image: warningmessage.jpg
No image: download_image.jpg
Did you really apply a Stock ROM for SM-G531F ?
Cause your bootloader says that: Product name :Sm-G531y
Dear All .
my phone stuck in download mode , even if restart or charging , same image comes .
Samsung grand prime sm g531f
Android 5.1.1
lolipop
( Firmware upgrade encountered an issue .please select recovery mode in kies)
But trying its not going to recovery mode.
On top its showing .
odin mode ( multi core download )
Product name SM-G531f
current binary : samsung official
Sytem Status : official
FRP Lock : on
knox warranty void : 0x0
Secure download : enabled.
Ap swrev : S1 L1 ,N1
please help me out , what to do know , just tell me the process. .. I think its unrooted device.
please waiting for your reply .
regards
riyaz .
1. Download Kies from here
2. Open up your phone and find the S/N and Model behind the battery, note this down.
3. Plug your phone into a PC and power it on
4. Open up Kies and click "tools" then "firmware upgrade and initialization"
5. follow the prompts on screen
Your phone will be returned to stock operating system.
Please read more carefully before you flash some thing next time
Sm-t337v band gone
Hi I too click the nand in odin and now I can't get it pass the Samsung galaxy tab icon.
I have gotten a put file and did that it passed tried to do a stock firmware it won't go passed the icon
It wont let me attach them here is what it says
Odin mode
Product name SM-T337V
Current binary Samsung official
System status official
Reactivation lock off
Qualcomm secure boot enable (csb)
Rp sr s1 t1 r1 a3 p1
Secure download enable
Udc start that's the safe mode I think
But I also can get in to recovery mode as well it also says mutil csc?
it says this
manual mode
applying muti-csc...
applied the csc-code; VZW
successfully applied muti-csc
I have wiped the cache
it states
android systems recovery 3e
LMY47X.T337VVRS3BPL1
VOL UP AND DOWN TO HIGHLIGHT
POWER BUTTON TO SELECT
I CAN REBOOT
apply update from adb or external storage or from cache
i can wipe data/factory reset which doesnt do a thing
i can wipe cache partition reboot to bootloader and power down.
SO someone on here has to know how i can fix this im so stupid i could kick myself
please email me at [email protected] I am in IT so I know some what to do but not alot
ty
tammy
download odin 3.13.1 and download official firmware T337VVRS3BPL1 5.1.1 and use AP slot and place tablet in download mode and flash.
Hello,
I have a SAMSUNG GALAXY S6 EDGE+ which is not able to boot anymore and contains precious data which I desperately want to recover (images and text messages).
If I let the phone boot normally I got a blank screen (white)
If I press Volume Low + Home + Power the phone directly enter DOWNLOAD MODE,
with de following information on the upper left corner:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G928F
CA_ TYPE: CA_3
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FAP LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 0 (0x0000)
AP SWREV: B:5 K:0 S:1
On the middle of the screen I can read
Downloading...
Do not turn off target
I never unlocked the boot-loader and/or installed custom recovery on this phone
I tried to :
Unlock boot-loader with Heimdall (or odin), in order to install TWRP
Problem: the phone is not in developer mode, so Heimdall failed to unlock the boot-loader
Recover data using Fone Paw for Android (trial 30 days version)
My phone model (SM-G928F) is not listed in the phone model list
It doesn't look like Fone Paw is able to access the device if I choose another phone model
I didn't try to :
Re-install stock Samsung-OS using ODIN
I'm afraid this will erase the data on the phone
I would appreciate if someone with some experiences on the subject could give me some advices here, what are my options to recover the data ?
Thanks for your help,
Regards,