Note:
1. Your phone Unlock Bootloader >> Click here for tutorial Unlock Bootloader
2. TWRP >> Click here to install TWRP for A51
3. Making GSI_Flasher >> Click here how to make GSI Flasher
Link download
Havoc-OS-v3.12-20201230-Official-GApps-arm64-ab.img.xz
All files >> Click here
A51:
1. Enter TWRP Recovery
2. Wipe >> format data >> yes >> reboot recovery
3. Entering recovery.
4. Wipe >> advanced wipe >> cache, dalvik cache, data
5. Transfer file your GSI zip file from PC/laptop to internal storage or SDCard
6. Install >> choose GSI zip file >> flash
7. Reboot system
8. ± 20 second entering welcome screen
9. Done
Additional
1. You can flash magisk if want to root
2. If you get bootloop, flash Disable Dm-Verity
Credit to
@SKULSHADY
@ianmacd
@phhusson
@soulr344
@redymedan
@topjohnwu
Nice! Will try it out when i figure out how to install twrp
Macke444 said:
Nice! Will try it out when i figure out how to install twrp
Click to expand...
Click to collapse
I already posted about Installed twrp
Hi, I have twrp up and running, did not flash havoc yet because i´m not sure hot to flash gapps. Should i follow th same procedure as with havoc os XZ file?
rufinotereso said:
Hi, I have twrp up and running, did not flash havoc yet because i´m not sure hot to flash gapps. Should i follow th same procedure as with havoc os XZ file?
Click to expand...
Click to collapse
For Samsung Galaxy A51
You can download GSI Havoc OS include gapps
Havoc OS Include Gapps >> just click and download
I can't find the gsi.xz file from point 2 in any way, so I can rename it, what should I do?
visioner_vs said:
I can't find the gsi.xz file from point 2 in any way, so I can rename it, what should I do?
Click to expand...
Click to collapse
I already update, so you don't get confused
I have been using it for a week now and i can say that this is quite stable, the only bugs i have ran into were:
*The fingerprint scanner being always active on the lockscreen, so if you want to write your password and it contains words that are on the scanner, the scanner wont let you write
*The camera only detects 12 mp max, I used the stock one and gcam and they both have max 12 mp
Everything else, battery, performance, root stability, etc is better than the stock rom.
iirx121 said:
I have been using it for a week now and i can say that this is quite stable, the only bugs i have ran into were:
*The fingerprint scanner being always active on the lockscreen, so if you want to write your password and it contains words that are on the scanner, the scanner wont let you write
*The camera only detects 12 mp max, I used the stock one and gcam and they both have max 12 mp
Everything else, battery, performance, root stability, etc is better than the stock rom.
Click to expand...
Click to collapse
Hello
1. I dont use lockscreen, but if you want using lock screen you can choose pin, password, pattern, keep fingerprint off
2. - For camera, I use this two app Open Camera and Footej Camera 2
Using Havoc third day straight, must say that is pretty much stable, no problems so far/without installed magisk so no comment on that/ and much better than Pixel Experience with whom I faced constant random reboots. Fast and smooth
Bange said:
Using Havoc third day straight, must say that is pretty much stable, no problems so far/without installed magisk so no comment on that/ and much better than Pixel Experience with whom I faced constant random reboots. Fast and smooth
Click to expand...
Click to collapse
Hope you enjoy using GSI Havoc
Related
I used TheStrix recovery 3.0M4 for the entire procedure.
Apps that have to write alot to cache like google maps, google earth, are MUCH faster with F2FS.
Make a nandroid backup if you want to revert to your current rom (common sense, no?)
Short video showing all add-ons - https://youtu.be/p9Zyb3C4gQ4
1) First Step
a. install cm13 firmware or install marshmallow miui rom (when installing miui rom with miflash you must allow the rom to boot once to create a proper partition table then reboot to recovery and wipe)
b. wipe all except sd and internal storage
c. install rr or rr-fk rom
d. install gapps if desired (arm64 6.0)
e. reboot to system (this particular reboot can take up to five minutes, be patient)
f. allow setup screen to appear
g. reboot to recovery after 30 secs on setup screen
2) Second Step
a. clear ONLY dalvik
b. install xposed uninstaller (using the xposed uninstaller before installing the framework is the install method recommended by the xposed developers)
c. install xposed framework
d. reboot to system (this particular reboot can take up to five minutes, be patient)
e. allow setup screen to appear
f. reboot to recovery after 30 secs on setup screen
3) Third Step
a. install supersu
b. reboot to system
c. allow setup screen to appear
d. reboot to recovery after 30 secs on setup screen
e. install goodix fix if you have goodix fp
f. install radon or agni kernel ( if using radon 3.7 make sure to check permissive selinux for goodix, the default is now enforcing )
g. reboot to system
h. complete setup
h. install xposed apk
i. done!
4) Optional for ViPER4Android FX
a. install this version of busybox from play store - https://play.google.com/store/apps/details?id=stericson.busybox
b. open busybox app and allow smart settings to complete (takes 2-3 minutes)
c. click "install" button
d. open viper4android fx apk (link below) and install then open. when viper is installing the driver it may seem like it is hanging. it's not, be patient the driver takes about a minute to install
e. reboot
f. done
5) Optional for F2FS data and cache
a. reboot to recovery
b. install stock boot.img to boot partition
c. install radon or agni kernel ( if using radon 3.7 make sure to check permissive selinux for goodix, the default is now enforcing )
d. convert data and cache to f2fs
--- don't try to skip a step and install goodix patch here, you will get infinite boot logo ---
e. install radon or agni kernel again ( if using radon 3.7 make sure to check permissive selinux for goodix, the default is now enforcing )
f. reboot to system (this particular reboot can take up to five minutes, be patient)
g. allow setup screen to appear
h. for non-goodix (fpc) you are done. remember to install xposed apk when you complete setup and complete the steps below for viper4android fx if you installed it earlier.
i. for goodix reboot to recovery and continue to next step
j. install goodix_fp_8.zip
k. install radon or agni kernel ( if using radon 3.7 make sure to check permissive selinux for goodix, the default is now enforcing )
l. reboot to system
m. complete setup again
n. install xposed apk
o. done
---- only if you installed viper4android fx earlier ---
p. install this version of busybox from play store - https://play.google.com/store/apps/details?id=stericson.busybox
q. open busybox app and allow smart settings to complete (takes 2-3 minutes)
r. click "install" button
s. install viper4android fx apk
t. done!
NOTE: I'm not responsible for you breaking your phone, blah blah blah....
Caveats for F2FS users:
You won't be able to take nandroid backups with zcx, you will have to use a customized recovery like TheStrix M4 recovery that supports mounting f2fs partitions.
Caveats for Xposed:
Since RR has many customization features built in, don't expect all the customization features from modules to work. For example, xstana replaces all icons except the battery icon.
Working:
Everything except backlight duration controller in RR settings. Minimal considering the benefits....
Termux: You must use tsu in place of su to have a proper superuser shell. Just open termux and enter "apt-get update && apt-get install tsu" . After tsu package is installed always use tsu in place of su. tsu is a su wrapper for termux to give you a proper interactive shell. I found this out after su was no longer working correctly in termux. This is true for all CM13 based roms as far as I can tell. I am a happy person now. :victory:
LINKS:
TheStrix Recovery M4 - https://www.androidfilehost.com/?w=file-thanks&fid=24591000424943818&mid=130&download_id=38ii1lgrbetl9irha0pklm89s3&tid=1485389435&hc=62d9b8ba004f8a7fbdbd414846b06e9c60f15e12e6b940178fedf2ec4f4c373e
CM 13 Firmware Link - https://www.androidfilehost.com/?fid=24591000424951192
Unlocked emmc_appsboot.mbn - https://drive.google.com/file/d/0B2w-p-CP_G3FaXVFdWp1ODJOQm8/view?usp=sharing
RR 5.7.4 Final Link - https://basketbuild.com/devs/resurrectionremix/kenzo
RR-FK 5.7.4 Final Link - https://forum.xda-developers.com/showpost.php?p=69825653&postcount=376
OpenGapps Link - http://opengapps.org/
Xposed Uninstaller Link - http://dl-xda.xposed.info/framework/uninstaller/
Xposed Framework Link - http://dl-xda.xposed.info/framework/sdk23/arm64/
Xposed Apk Link - https://forum.xda-developers.com/attachment.php?attachmentid=3921508&d=1477916609
Supersu Link - https://download.chainfire.eu/1016
Radon Kernel Link - https://forum.xda-developers.com/redmi-note-3/development/kernel-t3414884
Agni Kernel Link - https://forum.xda-developers.com/redmi-note-3/development/kernel-25-09-2016-agni-purecm-mm-v1-6-t3469874
Goodix Patch Link - https://yadi.sk/d/YX644C9UvjMNj
ViPER4Android FX Link - https://drive.google.com/file/d/0B2w-p-CP_G3FdnItU2ZrNEZkcms/view?usp=sharing
pinned do it soon, thanks for guide
if i have flashed cm 14.1 firmware then flash again cm 13 firmware it wil locked bootloader or not ? what should i do ?
ozan6661 said:
pinned do it soon, thanks for guide
if i have flashed cm 14.1 firmware then flash again cm 13 firmware it wil locked bootloader or not ? what should i do ?
Click to expand...
Click to collapse
I would suggest flashing the latest global stable marshmallow miui fastboot rom via miflash. Make sure you replace emmc_appsboot.mbn with an unlocked version or else you will be with a locked bootloader and a bad attitude. Be careful with miflash as I have already soft and hard bricked my phone many times with it. If you aren't brave enough just wipe all partitions except internal storage and sdcard then flash cm13 firmware.
Kenzo fastboot global stable 8.1.1.0 link - http://en.miui.com/a-234.html
Choose the one that says "Redmi Note 3 Qualcomm Latest Global Stable Version Fastboot File Download"
Unlocked emmc_appsboot.mbn link - https://drive.google.com/file/d/0B2w-p-CP_G3FaXVFdWp1ODJOQm8/view?usp=sharing
Can you help me with https://forum.xda-developers.com/redmi-note-3/help/request-kenzo-alka-unofficial-bl-steps-t3541497
hyperorb said:
Can you help me with https://forum.xda-developers.com/redmi-note-3/help/request-kenzo-alka-unofficial-bl-steps-t3541497
Click to expand...
Click to collapse
replied just follow this tutorial will be great.
pabloa2 said:
I would suggest flashing the latest global stable marshmallow miui fastboot rom via miflash. Make sure you replace emmc_appsboot.mbn with an unlocked version or else you will be with a locked bootloader and a bad attitude. Be careful with miflash as I have already soft and hard bricked my phone many times with it. If you aren't brave enough just wipe all partitions except internal storage and sdcard then flash cm13 firmware.
Kenzo fastboot global stable 8.1.1.0 link - http://en.miui.com/a-234.html
Choose the one that says "Redmi Note 3 Qualcomm Latest Global Stable Version Fastboot File Download"
Unlocked emmc_appsboot.mbn link - https://drive.google.com/file/d/0B2w-p-CP_G3FaXVFdWp1ODJOQm8/view?usp=sharing
Click to expand...
Click to collapse
have full wipe and flashing recovery rom 8.1.1.0 with zcx and follow the instruction and the last thanks for the rom i use RR-FK work without problem.
Thanks for the guide but can you clarify this which is written in bold " Guide up for Resurrection Remix 5.7.4 + XPOSED + Supersu + F2FS + Goodix or FPC FP (Thoroughly Tested)
It's a little lengthy but now I just might have the most badass phone in the universe... Cheers!"
Can you post Benchmarks/ battery usage etc?
Is this even any good? What are the benefits
Dalbin Reji said:
Is this even any good? What are the benefits
Click to expand...
Click to collapse
Um.... Let's see.... RR with f2fs and xposed.... Lol... Look man if you can't take 30 minutes to try something yourself, I don't know what to tell you honestly....
hayabusa_ryu said:
Thanks for the guide but can you clarify this which is written in bold " Guide up for Resurrection Remix 5.7.4 + XPOSED + Supersu + F2FS + Goodix or FPC FP (Thoroughly Tested)
It's a little lengthy but now I just might have the most badass phone in the universe... Cheers!"
Can you post Benchmarks/ battery usage etc?
Click to expand...
Click to collapse
Here I'll clarify it for you. "Resurrection Remix 5.7.4 + XPOSED + Supersu + F2FS + Goodix or FPC FP"
You removed the fourth step? Also please post antutu benchmark and SOT. You should also post steps to return back to stock in case someone does not like this.
hayabusa_ryu said:
You removed the fourth step? Also please post antutu benchmark and SOT. You should also post steps to return back to stock in case someone does not like this.
Click to expand...
Click to collapse
i got 7h SOT with LTE and unstable signal, my antutu is 70k with radon 3.5 with all stock
I have gotten ~76000 with with stock kernel and rom. SOT, I never noticed but it is good in dual sim setting, LTE and 3g + data always on and WiFi Hotspot too.
hayabusa_ryu said:
You removed the fourth step? Also please post antutu benchmark and SOT. You should also post steps to return back to stock in case someone does not like this.
Click to expand...
Click to collapse
Post steps to return to stock? Ok... Make nandroid backup. Restore nandroid backup.......
ozan6661 said:
i got 7h SOT with LTE and unstable signal, my antutu is 70k with radon 3.5 with all stock
Click to expand...
Click to collapse
Thats kernel or, screen brightness is close to 100. I'm getting the same as always with radon kernel 3.6 stock balanced. 7 hrs with brightness at 100 and 10-11 hrs with screen at appx 50 percent. Antutu with stock balanced radon 3.6 and balanced battery profile, 76k.
ozan6661 said:
i got 7h SOT with LTE and unstable signal, my antutu is 70k with radon 3.5 with all stock
Click to expand...
Click to collapse
Make you are on latest miui firmware. I have LTE and signal is rock solid. As always, wipe all, followed by format data, followed by flashing latest miui firmware. Then flash your marshmallow roms.
hayabusa_ryu said:
You removed the fourth step? Also please post antutu benchmark and SOT. You should also post steps to return back to stock in case someone does not like this.
Click to expand...
Click to collapse
I removed a lot of steps because i didn't know about the strix recovery m4 version which solves many problems. I added a new fourth step just for you.
pabloa2 said:
Here I'll clarify it for you. "Resurrection Remix 5.7.4 + XPOSED + Supersu + F2FS + Goodix or FPC FP"
Click to expand...
Click to collapse
Av tried this before and it's not as complicated as you make it sound
Dalbin Reji said:
Av tried this before and it's not as complicated as you make it sound
Click to expand...
Click to collapse
It was complicated as hell until i found strix m4 recovery then things became a WHOLE lot easier. anyways if you don't want to try the rom and just want to say stupid things for no reason, go somewhere else. it took me almost a week pinning down the most direct, fastest way of accomplishing what i wanted. rr with xposed, supersu, f2fs, goodix fp, and viper audio. it's good there's lots of people out there that actually do things with their time instead of talking nonsense on some random xda thread. Now that I figured out all the steps through trial and error because RR never wants to boot if you do one little thing wrong of course it's easy. It took me around 10 hours of total time to figure out the exact steps so RR wouldn't freeze on the boot logo. Do you want to try another method? Be my guest, have fun looking at the RR logo for the next 10 hours. Oh, and don't forget to spend an hour writing a guide about how you did it too.... thanks.
When flasing the RR-fk waht should i do with the Device tree? Can u give the link for me to learn? Search in google and confuse which i should read first... Thx before
CalebWang said:
When flasing the RR-fk waht should i do with the Device tree? Can u give the link for me to learn? Search in google and confuse which i should read first... Thx before
Click to expand...
Click to collapse
The rr-fk rom is BUILT WITH an optimized device tree. before you ask the same question on two different threads read the answer carefully.
finally I unlocked my bootloader and tested installing several treble roms.
I dont know if I did it right, but it works.
--> only works if you have a firmware without Anti-Rollback. When Anti-Rollback is activated you will end up in EDL Mode !!!
Here's how I did it:
1. unlocking the bootloader
2. fastboot erase userdata
3. flashed the RedWolf Recovery because it has treble support
4. wiped everything (incl. format data --> yes)
5. flasehd no-verity-opt-encrypt-6.0.zip
6. installed xiaomi.eu rom zip (without doing that, no treble rom booted up)
7. after successful installation --> wipe = factory reset without rebooting
8. installed treble rom (A-ONLY = Pixel Experience & dotos worked)
9. flashed opengapps arm64 8.1 (not necessary for Pixel Experience)
10. flashed Magisk 16.7 (1671)
11. done
you should install Android SystemWebView from the PlayStore if it's not installed by default - otherwise a lot of apps are not working
Some roms had bootlops. Such as OmniRom and OmniRom Treskmod
Here are some cons:
- battery draining seems to be faster than miui rom
- brightness control is not perfect (even with the extra overlay)
- my Bose bluetooth headphones are connected but I don't hear anything (on pph it works fine)
- no 18:9 screen fitting for old apps (for example QuickPic Gallery)
After all, I think it will be fixed and it's a very good phone. Now I can sell my Samsung S8+
I got RR and AICP-mordiford working too following step 7-11 from Eu rom.
Thanks a lot for sharing.
yeaah!! thats the spirit!
Finally we're getting some rom flashing :laugh::laugh:
Is there a LineageOS 15.1 treble GSI available that would be suitable for this device?
stephendt0 said:
Is there a LineageOS 15.1 treble GSI available that would be suitable for this device?
Click to expand...
Click to collapse
https://forum.xda-developers.com/pr...evice-development/lineage-phh-treble-t3767690
stephendt0 said:
Is there a LineageOS 15.1 treble GSI available that would be suitable for this device?
Click to expand...
Click to collapse
bhammler said:
https://forum.xda-developers.com/pr...evice-development/lineage-phh-treble-t3767690
Click to expand...
Click to collapse
Anyone willing to try and see if it works?
SUPERUSER said:
Anyone willing to try and see if it works?
Click to expand...
Click to collapse
@bhammler, will the lineage OS posted above work on mi max 3?Anyone tried successfully, please list your recovery (red wolf I assume) and your steps on flashing. Please update us. Thank you! Still waiting on my mi max 3 to arrive, otherwise I'd try myself.
It's all said in my initial post. Official twrp is released and works too
Gesendet von meinem Phh-Treble with GApps mit Tapatalk
bhammler said:
It's all said in my initial post. Official twrp is released and works too
Gesendet von meinem Phh-Treble with GApps mit Tapatalk
Click to expand...
Click to collapse
Thanks buddy :highfive:
bhammler said:
finally I unlocked my bootloader and tested installing several treble roms.
I dont know if I did it right, but it works.
Here's how I did it:
1. unlocking the bootloader
2. fastboot erase userdata
3. flashed the RedWolf Recovery because it has treble support
4. wiped everything (incl. format data --> yes)
5. flasehd no-verity-opt-encrypt-6.0.zip
6. installed xiaomi.eu rom zip (without doing that, no treble rom booted up)
7. after successful installation --> wipe = factory reset without rebooting
8. installed treble rom (A-ONLY = Pixel Experience & dotos worked)
9. flashed opengapps arm64 8.1 (not necessary for Pixel Experience)
10. flashed Magisk 16.7 (1671)
11. done
Some roms had bootlops. Such as OmniRom and OmniRom Treskmod
Here are some cons:
- battery draining seems to be faster than miui rom
- brightness control is not perfect (even with the extra overlay)
- my Bose bluetooth headphones are connected but I don't hear anything (on pph it works fine)
- no 18:9 screen fitting for old apps (for example QuickPic Gallery)
After all, I think it will be fixed and it's a very good phone. Now I can sell my Samsung S8+
Click to expand...
Click to collapse
How much worse is battery drain?
RedMi92 said:
How much worse is battery drain?
Click to expand...
Click to collapse
not very bad: in standby around 2% per hour and with screen on around 7-8 hours
bhammler said:
not very bad: in standby around 2% per hour and with screen on around 7-8 hours
Click to expand...
Click to collapse
Great, thanks! will flash RR GSI as soon as i unlock BL.
SUPERUSER said:
Anyone willing to try and see if it works?
Click to expand...
Click to collapse
I did a quicck test on LineageOS 15.1 treble GSI. I have some problem with google play store (won't download) with the gapp version.. The vanilla version (plus pico opengapp) is working fine.
Red Wolf twrp -> wipe -> swipe to factory reset -> install -> install image -> xxx.-vanilla-nosu.img -> install -> open_gapp-xxxxpico-xxx.zip -> Reboot
Go back to recovery again to install magisk.
jngiag said:
I did a quicck test on LineageOS 15.1 treble GSI. I have some problem with google play store (won't download) with the gapp version.. The vanilla version (plus pico opengapp) is working fine.
Red Wolf twrp -> wipe -> swipe to factory reset -> install -> install image -> xxx.-vanilla-nosu.img -> install -> open_gapp-xxxxpico-xxx.zip -> Reboot
Go back to recovery again to install magisk.
Click to expand...
Click to collapse
Do you have issues with the brightness control as well?
opasha said:
Do you have issues with the brightness control as well?
Click to expand...
Click to collapse
I use this one: system.img for A-only ARM64 devices with GApps and SU
no errors so far. I had some errors with Opengapps and Mindthegapps.
After setting it up, I flashed Magisk 16.7. I'm using it now for 5 days and no problems
opasha said:
Do you have issues with the brightness control as well?
Click to expand...
Click to collapse
for the brightness I flashed the Brightness-Overlay (found it in the treble thread). Download the apk (https://forum.xda-developers.com/showpost.php?p=75630470&postcount=38), copy it to /vendor/overlay (rights: 644), connect phone to your pc with adb and type the following commands:
Code:
adb shell
su
mount -o rw,remount /system
mount -o rw,remount /vendor
chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay;chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay/framework-res__auto_generated_rro.apk
reboot
After a reboot I set the brightness to "0" and activated the adaptive brightness control.
That works good. Could be darker in the dark, but it's much better than before
bhammler said:
for the brightness I flashed the Brightness-Overlay (found it in the treble thread). Download the apk (https://forum.xda-developers.com/showpost.php?p=75630470&postcount=38), copy it to /vendor/overlay (rights: 644), connect phone to your pc with adb and type the following commands:
adb shell
su
mount -o rw,remount /system
mount -o rw,remount /vendor
chcon ubject_r:vendor_overlay_file:s0 /vendor/overlay;chcon ubject_r:vendor_overlay_file:s0 /vendor/overlay/framework-res__auto_generated_rro.apk
reboot
After a reboot I set the brightness to "0" and activated the adaptive brightness control.
That works good. Could be darker in the dark, but it's much better than before
Click to expand...
Click to collapse
Thanks so much for the helpful tips. Which treble rom do you like best?
opasha said:
Thanks so much for the helpful tips. Which treble rom do you like best?
Click to expand...
Click to collapse
I use this one https://forum.xda-developers.com/project-treble/trebleenabled-device-development/experimental-phh-treble-t3709659
It has no advanced settings For that I use xposed and GravityBox
bhammler said:
I use this one https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
It has no advanced settings For that I use xposed and GravityBox
Click to expand...
Click to collapse
Do banking apps work with xposed running? I use magisk hide, but read xposed gives limitations. Thanks!
Can anyone please explain in a nutshell what treble is? I've searched Google but it's not clear.
Hello A2 users ,
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
1-you need unlocked bootloader
2- Download Stock Rom for A2 : Download
3- Download MI 6X MIUI 9 at first (to avoid Anti-Rollback)(fastboot) : Download
4- Unzip Stock Rom and MI 6X MIUI 9 ROM
5- Go to Stock Rom folder > image
then copy this files
*abl.elf
*prog_emmc_firehose_Sdm660_ddr.elf
*prog_emmc_firehose_Sdm660_lite.elf
To 6X MIUI 9 > image
and accept replace files
6- put ur phone in EDL mode and Connect Mobile to pc by usb
7- Download MIFlash : Download
8- Open MiFlash Select 6X Miui folder
9- Click Refresh on Mi Flash Then choose Clean all and click flash
10- waiting Mobile boot up .... Now u on MIUI 9
11- Don't Update mobile from updater it self to not stuck in MIUI only and can't back to Android One
12- Download MIUI 10 : Download
13- Open ZIP using winrar and delete "firmware-update" (to remove anti-rollback)
14- install TWRP : Download
15- put your mobile in Fastboot
16- Open CMD and write "fastboot boot twrp-3.2.1-test-wayne.img"
17- Now your mobile opened TWRP go to Wipe and Factory reset
18- go to wipe > Advanced wipe > david/cache/data Don't select system
19- Move MIUI 10 folder to your mobile and flash it
20- Congratz u got MIUI 10
**Don't update mobile from Setting every update u should use TWRP and don't forget to delete "firmware-update"**
When u go to take photo using camera u got error "can't connect to camera" ?
Jut go to Camera > Setting > Disable Enhance lowlight photos and will work normally
Telegram Group : Join Now
Thanks: @windforce3425
Can we go back to android one stock rom after trying MIUI ? Is there any problem going from A/B partition to A only and back? Any major bugs in MIUI ? Thank you very much for your response and guide.
Thank you for the instructions.
Please tell me how to go to edl mode and also in the step no 13 after unzip and deleting the "firmware update" do i need to repack it? And how will I install via twrp? As an img or a zip file?
And also which are the bugs? Is it as smooth as the other xiaomi devices?
Again thank you for your efforts.
Mr.Nice.ba said:
Can we go back to android one stock rom after trying MIUI ? Is there any problem going from A/B partition to A only and back? Any major bugs in MIUI ? Thank you very much for your response and guide.
Click to expand...
Click to collapse
if u did all steps right
yeah u can back to Android one again
No problem when u install MIUI u will be Just A partition and when u back again to Android one u will be A/B
No bugs because A2 and 6X same drivers and hardware
hrizuwan said:
Thank you for the instructions.
Please tell me how to go to edl mode and also in the step no 13 after unzip and deleting the "firmware update" do i need to repack it? And how will I install via twrp? As an img or a zip file?
And also which are the bugs? Is it as smooth as the other xiaomi devices?
Again thank you for your efforts.
Click to expand...
Click to collapse
1- u can use A2 toolkit form other thread to reboot in EDL
2- I didn't say unzip in no.13 I said open it by WinRAR delete it and close WinRAR again
3- after u delete "firmware-update" from zip copy Zip file to mobile and flash it
Back camera is crashing when taking photo on MIUI 10.
djmitza222 said:
Back camera is crashing when taking photo on MIUI 10.
Click to expand...
Click to collapse
Can't coonect to camera ? Am I right ?!
djmitza222 said:
Back camera is crashing when taking photo on MIUI 10.
Click to expand...
Click to collapse
Give a review. How is the performance and all? Can be used as a daily driver?
hrizuwan said:
Give a review. How is the performance and all? Can be used as a daily driver?
Click to expand...
Click to collapse
definetely suitable as daily driver since its the official ROM by xiaomi for the 6X and our devices share same specs.
windforce3425 said:
definetely suitable as daily driver since its the official ROM by xiaomi for the 6X and our devices share same specs.
Click to expand...
Click to collapse
Did you check this rom out personally? If so then how was your experience? Battery life improved? And also can you help me how can I go to edl mode?
Thanks in advanced ?
hrizuwan said:
Did you check this rom out personally? If so then how was your experience? Battery life improved? And also can you help me how can I go to edl mode?
Thanks in advanced
Click to expand...
Click to collapse
Of course man, check first post OP mentioned me at the end. Battery life didn't improve, it's same as on Stock. I get 5-6h SOT with some tweaks other people here on xda are also using. To reboot simply type "fastboot reboot edl" when in fastboot mode.
someone could do an AnTuTu benchmark with this ROM, please.
Is the camera working fine?
What's the procedure to get back to Android One?
Can u guys please post a guide on how to go back to stock?
iEstuardo said:
Is the camera working fine?
What's the procedure to get back to Android One?
Can u guys please post a guide on how to go back to stock?
Click to expand...
Click to collapse
I'd also like to know how to get back to stock if I end up flashing miui.
The camera works with GCam but with the stock MIUI, when you take a picture, it crashes instantly. Overall, great performance! I was able to install AOSP Extended Custom ROM as well for Mi 6X on my Mi A2 by just downloading the zip file for wayne + Gapps and flashed them through TWRP. All of this is possible because the device got converted to wayne (Mi 6x) with the partition layout. So any custom ROM made for Mi 6x is compatible.
Edit: Custom ROM from mi-globe.com works even the camera! So I think it's a bug in the stock ROM, idk.
is unlocked bootloader and edl access denied after convert ?
emprazol said:
is unlocked bootloader and edl access denied after convert ?
Click to expand...
Click to collapse
Bootloader needs to be unlocked before the convert. Bootloader stays unlocked after, so no problem with that. EDL access it's still granted. If you want to relock bootloader, you need to convert the phone back to jasmine (Mi A2), otherwise you will brick it.
windforce3425 said:
Of course man, check first post OP mentioned me at the end. Battery life didn't improve, it's same as on Stock. I get 5-6h SOT with some tweaks other people here on xda are also using. To reboot simply type "fastboot reboot edl" when in fastboot mode.
Click to expand...
Click to collapse
HELP I'm on miui 9. I installed twrp but data is encrypted. what can I do now to install MIUI 10?
hrizuwan said:
HELP I'm on miui 9. I installed twrp but data is encrypted. what can I do now to install MIUI 10?
Click to expand...
Click to collapse
Flash this TWRP: https://mega.nz/#!2I4AxQpL!uB4JF1f27NusRmNHZ2HHW0-ig_EyQqvWYj9h02cm8bU
Then boot into it, Wipe - Format Data - Write YES and confirm. Boot back to TWRP, copy the MIUI10 zip, wipe data/cache and flash it then reboot to system.
djmitza222 said:
Flash this TWRP: https://mega.nz/#!2I4AxQpL!uB4JF1f27NusRmNHZ2HHW0-ig_EyQqvWYj9h02cm8bU
Then boot into it, Wipe - Format Data - Write YES and confirm. Boot back to TWRP, copy the MIUI10 zip, wipe data/cache and flash it then reboot to system.
Click to expand...
Click to collapse
Thanks, managed to install MIUI 10 but the camera is not working. HELP again. thanks in advance
What is this?
- sGSI of ZUI 10.0/ 5.0 from Lenovo Z5pro/Z5, based on Android 8.1.0, June 1,2018 security patch.
Since this was requested in some comments, I flashed it and found working for our device flawlessly, with some bugs.
Features?
-All features of ZUI 4 + Soft Charge, gestures, multi space ( dual apps ) etc. Split Screen is also available.
How to flash?
ZUI 10 :
1. Download the flashable zip from the links.
2. Boot to twrp, and wipe dalvik, cache, data, system and vendor.
3. Flash the zip.
4. Reboot.
ZUI 5:
Method 1 : (Recommended)
- 1. Download any treble based 8.1.x rom and ZUI5.0-sGSI.zip (link below).
[Please use MIUI 10 8.11.1 by Narshi Shukla as base ROM, as it seems it's Vendor is most compatible.]
2. Extract the zip in your storage. You will get three files ( two flashable zips and one folder "sGSI.....". [Folder name might differ, there will be only one folder, so no worries])
3. Boot into recovery and take a backup.
4. Clean flash treble based Oreo ROM that you downloaded.
5. From your twrp, use file manager to move " sGSI...." folder to backup folder of Twrp.
6. Mount system and vendor and wipe cache/delvik, data and system.
( Don't wipe firmware and Vendor )
7. Goto restore in your twrp and restore the system from "sGSI....." folder.
8. Flash the remaining two zips.
9. Flash magisk if needed.
10. Wipe cache/delvik and reboot. Done.
Method 2 : https://forum.xda-developers.com/showpost.php?p=78389810&postcount=320
(You need treble based twrp, search if you don't already have).
After following all these steps, if your phone is stuck in Lenovo powered by android screen for long, then force reboot the phone and it will boot up to system.
What works?
-Here:
Call,SMS, VOLTE, Data, play store, Utouch, Fingerprint , Navigation, Double touch to wake, GCAM, Face Unlock, Hotspot, Banking apps, nearly everything.
What doesn't work?
- ROM specific. Bugs depend upon the treble ROM that you used as base. In some ROM, system sounds does not work. In MiUI 10, video recording might not work. Game Mode has some issues with global apps.
*FOR VIDEO RECORDING - see this : https://forum.xda-developers.com/showpost.php?p=78219358&postcount=93 ****
*Update GPU drivers for VULKAN support. Link in the links section.***
Performance?
- Better than ZUI 4, smooth as butter, no stutter playing games like PUBG, notifications on time, decent SOT.
Can it be used as daily driver?
- Yes, if you can live with some Chinese texts in certain apps.
Any other thing?
- Because the ROM is ported from Z5 which has a notch, total area of the notification bar cannot be used. To see things like real time network speed and battery "percentage" you have to pull down the notification bar.
What should I do first after booting the device?
- Install play store from App center. Install magisk to remove bloat wares. Install any music app, since there is none. This will make the system optimal for us.
Also, Turn "True Full Screen Mode" ON in display settings for full screen in Apps.
Install Magisk and download and install "SafteyPatch V2" within Magisk to pass safetynet and hide banking apps in magisk hide to use them.
Open security app and give all important permissions to the apps you use, including system apps. Also include them in autorun/whitelist section.
Links?
-Here
ZUI 10
https://drive.google.com/open?id=17lyWnAl0Kjkv5S89wdtw7HglF2072zP5
ZUI 5
Mega link :
https://mega.nz/#!FyxSiI7Y!iZmmVufR6pipX3mwv_-I3HqI714YAMJN1a2zIysinmc
Gdrive link:
https://drive.google.com/open?id=1F_Ou6x2bj26hhdffw45uo4r9qlJuaDb5
MiUi 10 8.11.1 Narshi Shukla - Full Rom
https://androidfilehost.com/?fid=11410932744536996684
MIUI 10 8.11.1 Narshi Shukla - Vendor for twrp recovery: @(THIS VENDOR isnt compatible with all roms, if facing random reboots, use the complete MIUI 10 ROM for the Gsi)
https://drive.google.com/drive/u/0/folders/15QHEUfLMagMV9jZTmlUHa4hkhkNTF-RC
Working GCAM link :
https://www.celsoazevedo.com/files/android/google-camera/f/MGC_6.1.021_FINAL_V1a_A8.1+.apk
VULKAN enabled open GL 3.2 driver link :
https://drive.google.com/folderview?id=11_atz5CDK9bHG4K_ME2LSRFFnxxKqWw2
Credits:
Not my work, I am just sharing it since I found it working.
All credits goes to this Xiaomi thread and bugrevealingbme.
https://*************/threads/zui-5-0-a-only-treble-rom.226/
******************************** FLASHING ISSUE ******************
While flashing this ROM, try to follow the guide above as strictly as possible. Use the ROM that is recommended.
If you are facing bootloop, download the vendor that is provided and restore it in twrp and then flash patch 1 and 2.
Also remember, during each and every step, your TWRP should have system and Vendor mounted. Check after every step.
Your phone might reboot once or twice during first boot, which is not an issue.
How to know if you flashed it correctly?
-If your phone boots into the system with "Lenovo bootanimation" , you flashed it correctly.
If your phone is stuck in "Lenovo - powered by android" splash image for more than 5 minutes, you got something wrong.
*********************************************************************
Screenshots attached :
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
I have one question. If i install a sgsi rom can i back to trenle, non-treble rom just with a simple flash method?
muujeeb said:
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
Click to expand...
Click to collapse
gcamera is working on redmi note 5 pro. should work also here.
muujeeb said:
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
Click to expand...
Click to collapse
GCAM is working.
Notification bug is not there. Only sometimes, it seems that we get late notification.
You have to flash it over Oreo because the GSI is Oreo based. Flashing over pie should work as well, since treble ROM is required. Take a backup of your system so you can restore easily, if you face any issue.
nonamesry said:
I have one question. If i install a sgsi rom can i back to trenle, non-treble rom just with a simple flash method?
Click to expand...
Click to collapse
Yes, you can get back to the ROM you want with simple flash, no problem.
Custom kernel flashable?
ashwinonm said:
Custom kernel flashable?
Click to expand...
Click to collapse
Haven't tested, but should be flashable.
Edit : Custom kernel might brick the device. Will test and update.
Donot flash custom kernel, it causes self restart of device.
Note: Moxie kernels can be flashed, you should flash patch2 after flashing kernels. But, MIUI 10 comes with moxie R5.1 so no use flashing Moxie again.
link not working
Wow it's so beautiful!
I used Arrow OS 8.1 but it got stuck in bootloop and does'nt boot at all.. I followed all the steps accordingly but it did not boot up even after i kept my phone overnight to let it boot. I don't know where i did wrong.
muujeeb said:
I used Arrow OS 8.1 but it got stuck in bootloop and does'nt boot at all.. I followed all the steps accordingly but it did not boot up even after i kept my phone overnight to let it boot. I don't know where i did wrong.
Click to expand...
Click to collapse
Use MIUI 10 port of Narshi Shukla latest build. It works.
May be Arrow OS cannot be used.
You can also try using Vendor of MIUI 10 once. Restore this vendor and the system image of ZUI.
Here is the vendor:
https://drive.google.com/drive/mobile/folders/15QHEUfLMagMV9jZTmlUHa4hkhkNTF-RC?usp=drive_open
kany1 said:
link not working
Click to expand...
Click to collapse
Link is working fine.
jebish7 said:
Link is working fine.
Click to expand...
Click to collapse
yes it is working with mega app
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
---------- Post added at 01:19 PM ---------- Previous post was at 01:13 PM ----------
ok i try to flash it again and boot successflly
marclevine said:
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
Click to expand...
Click to collapse
I think only MIUI 10 rom works flawlessly for this GSI. I will update the main page details and ask to use MIUI 10 only.
You couldnot flash patch 2 because it requires vendor, and may be your vendor is now messed up.
So use MIUI 10 port, it works without any issue.
marclevine said:
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
---------- Post added at 01:19 PM ---------- Previous post was at 01:13 PM ----------
ok i try to flash it again and boot successflly
Click to expand...
Click to collapse
Glad To hear.
So in whatever rom I am in Oreo , I can use that firmware if I use vendor only from your backup? And shouldn't wipe it?
ashwinonm said:
So in whatever rom I am in Oreo , I can use that firmware if I use vendor only from your backup? And shouldn't wipe it?
Click to expand...
Click to collapse
Well, that's how some people got this working, so yes, it's working that way as well. ( Your ROM should be treble based though )
I will attach the "Vendor" file in the main post as well, so other members can use it too.
custom kernel possible,mine running in moxie
** Post updated on 01/10/19 to include AOSiP GSI **
After trying out a lot of Android 10 GSIs, I have managed to get Lineage OS 17 and AOSiP GSI builds by Erfan to run on Mi Max 3. Thanks to the Dev erfanoabdi and his team who have worked on these.
On Mi Max 3 they are very smooth when they are working. However, certain apps can trigger freezing episodes or forced reboots. AOSiP seems smoother and more stable for now. Both are almost stock with no customization. Over all they are still buggy, just usable, and not reliable.
I am not a developer! Try at your own risk!!
** PLEASE NOTE: You would need to be on one of the AOSP- or LOS-based custom Pie Roms with firmware version 9.9.3 (as base) before flashing this rom. Havoc and AEX have been confirmed to work**
Here are the steps
What you would need:
1. GSI Android 10 Rom:
a. Lineage 17 GSI by Erfan: lineage-17.0-Aonly-10-20190909-ErfanGSI.img.7z
b. AOSiP
2. Permissiver_v4.zip
3. FixZygote_v2.zip
4.open_gapps-arm64-10.0-nano-20190920-UNOFFICIAL.zip
5. Magisk 19.4
6. Any file extractor app. I used ZArchiver from Play store.
Installation Steps.:
1. Extract system image from Android 10 GSI zipped file using app of your choice (ZArchiver in my case)
2. Boot into your recovery (I used Nijel's TWRP 3.2.3-3 and 3.2.3-4)
3. Back up your current ROM
4. Wipe data, system, art/davlik and cache
5. Tap install. Then tap ''Image''. Then select the (extracted) Lineage-17 system image, then tap System. Swipe to install.
6. Install Permissiver_v4 zip file.
7. Install FixZygote_V2 zip file
8. Install Magisk 19.4 zip file.
9. Boot into system. Tap ''OK'' on the screen pop up.
10. Reboot into TWRP.
11. Install OpenGaps.
13. Reboot system and set up your phone.
14. Reboot phone and start using.
What works
1. Mobile data, Wifi and bluetooth
2. Phone calls and messaging including dual sim
3. Playstore
4. Rooting with Magisk
5. Finger print reader
6. Gestures are amazing. Dark mode great!
Bugs
1. Stock camera and torch light do not work.
2. Slider does not control brightness
3. Chrome browser freezes. . Firefox and Via browser running smoothly.
4. Camera and video apps force-close or cause random reboots
Where are the links to the packages and why you install two different gapps (Bitgapps&Opengapps)???
L_e_x_t_e_r said:
Where are the links to the packages and why you install two different gapps (Bitgapps&Opengapps)???
Click to expand...
Click to collapse
There are no links to the packages as I wasn't certain of the XDA rules on links to other websites. Just google them and they are easy to find.
I tried just open gapps or just BitGaps and didn't work. Flashing BitGaps first appeared to point the Open Gapps to the right partition, and that worked.
Thanks for posting but very confusing without links. I know what mean about the rules but you can link the page for the GSI not the download etc
shingers5 said:
Thanks for posting but very confusing without links. I know what mean about the rules but you can link the page for the GSI not the download etc
Click to expand...
Click to collapse
I understand.
Thanks to the Nesh Patel at Tweakguy for the links.
My thanks to the devs who have worked on these.
Here are the links:
For Lineage GSI: https://github.com/resk84/releases/...ineage-17.0-Aonly-10-20190909-ErfanGSI.img.7z
For permissive: https://androidfilehost.com/?fid=600693192411788649
For bitzygote:
https://androidfilehost.com/?fid=1395089523397961748
Permissive link not working
shingers5 said:
Permissive link not working
Click to expand...
Click to collapse
Missed one digit at the end.
Permissiver link:
https://androidfilehost.com/?fid=6006931924117886495
This won't boot on global mix max 3 boot loop with both Nigel mod and orangefox recoveries. No work for global 4gb 64gb ROM model
shingers5 said:
This won't boot on global mix max 3 boot loop with both Nigel mod and orangefox recoveries. No work for global 4gb 64gb ROM model
Click to expand...
Click to collapse
I was on the latest Havoc Rom for Mi Max 3. Also my hardware is 6GB 128GB.
I tried a lot of the Android 10 GSIs and this was the only one that booted. The sequence has to be exactly same as in my post to boot.
Also, I don't know if it may have to do with your vendor. I didn't wipe and then flash the device-specific vendor firmware as suggested in some GSI how-to's.
So you were on an android pie ROM and flashed android 10 over it without wipe? I was on miui 11 before flash on global device
shingers5 said:
So you were on an android pie ROM and flashed android 10 over it without wipe? I was on miui 11 before flash on global device
Click to expand...
Click to collapse
Yes Havoc Pie Rom. I wiped davlik/art, system, data and cache only. Then proceeded exactly as outlined in my post. I have just flashed the LOS 17 again with my steps and it boots.
stonesolouk said:
Yes Havoc Pie Rom. I wiped davlik/art, system, data and cache only. Then proceeded exactly as outlined in my post. I have just flashed the LOS 17 again with my steps and it boots.
Click to expand...
Click to collapse
first attempt
i had derpfest AOSIP so i flashed LOS 17 over that with no wipe then the permissive and fix zip and it booted with errors. gestures for home works but edges dont. also kept fail on system etc
2nd attempt
flashed derpfest AOSIP then reboot
back to recovery then wipe as you did flash LOS17 then permissive and fix zips then reboot. boots up but same as before home gesture works and dark mode etc but edges don't. the bitgapps dont flash and open gapps nano causes bootloop on its own
3rd attempt gonna try with firmware 9.9.3 and flash without wipe vendor like the old days to see what happens
Got it good as I can for now
Flashed and booted AEX 6.7
Back to recovery and wiped as you say and not vendor
Flashed LOS 17 image then permissive and fix zips and magisk
Reboot
Didn't need flash 2 gapps just open gapps nano and reboot
Seems good apart from obvious
Brightness doesn't work
Camera
Battery drain very high
shingers5 said:
Got it good as I can for now
Flashed and booted AEX 6.7
Back to recovery and wiped as you say and not vendor
Flashed LOS 17 image then permissive and fix zips and magisk
Reboot
Didn't need flash 2 gapps just open gapps nano and reboot
Seems good apart from obvious
Brightness doesn't work
Camera
Battery drain very high
Click to expand...
Click to collapse
That's great. It settles down after a few more boots. I will update my post with your findings.
Brightness and all edge gestures work for me though.
stonesolouk said:
That's great. It settles down after a few more boots. I will update my post with your findings.
Brightness and all edge gestures work for me though.
OK cool. Hopefully someone can get it working fully or at least stable enough for daily use
Click to expand...
Click to collapse
And what about the AOSIP-Aonly-10-20190924-ErfanGSI.7z? Do I flatten the Lineage-17.0-Aonly-10-20190909-ErfanGSI.img or do I have to decide between one of them?
Does not herfor from the instructions
rudiratlos57 said:
And what about the AOSIP-Aonly-10-20190924-ErfanGSI.7z? Do I flatten the Lineage-17.0-Aonly-10-20190909-ErfanGSI.img or do I have to decide between one of them?
Does not herfor from the instructions
Click to expand...
Click to collapse
Yes it is one or the other.
You could try each one separately, then decide the one you prefer. AOSiP seems more fluid and stable.
Thank you for your prompt reply
What's the report on AOSIP as I haven't tried it yet. Wish someone would take the gsi and get it stable
shingers5 said:
What's the report on AOSIP as I haven't tried it yet. Wish someone would take the gsi and get it stable
Click to expand...
Click to collapse
It is smoother and more stable compared to LOS 17 but brightness slider and camera still don't work.