What is this?
- sGSI of ZUI 10.0/ 5.0 from Lenovo Z5pro/Z5, based on Android 8.1.0, June 1,2018 security patch.
Since this was requested in some comments, I flashed it and found working for our device flawlessly, with some bugs.
Features?
-All features of ZUI 4 + Soft Charge, gestures, multi space ( dual apps ) etc. Split Screen is also available.
How to flash?
ZUI 10 :
1. Download the flashable zip from the links.
2. Boot to twrp, and wipe dalvik, cache, data, system and vendor.
3. Flash the zip.
4. Reboot.
ZUI 5:
Method 1 : (Recommended)
- 1. Download any treble based 8.1.x rom and ZUI5.0-sGSI.zip (link below).
[Please use MIUI 10 8.11.1 by Narshi Shukla as base ROM, as it seems it's Vendor is most compatible.]
2. Extract the zip in your storage. You will get three files ( two flashable zips and one folder "sGSI.....". [Folder name might differ, there will be only one folder, so no worries])
3. Boot into recovery and take a backup.
4. Clean flash treble based Oreo ROM that you downloaded.
5. From your twrp, use file manager to move " sGSI...." folder to backup folder of Twrp.
6. Mount system and vendor and wipe cache/delvik, data and system.
( Don't wipe firmware and Vendor )
7. Goto restore in your twrp and restore the system from "sGSI....." folder.
8. Flash the remaining two zips.
9. Flash magisk if needed.
10. Wipe cache/delvik and reboot. Done.
Method 2 : https://forum.xda-developers.com/showpost.php?p=78389810&postcount=320
(You need treble based twrp, search if you don't already have).
After following all these steps, if your phone is stuck in Lenovo powered by android screen for long, then force reboot the phone and it will boot up to system.
What works?
-Here:
Call,SMS, VOLTE, Data, play store, Utouch, Fingerprint , Navigation, Double touch to wake, GCAM, Face Unlock, Hotspot, Banking apps, nearly everything.
What doesn't work?
- ROM specific. Bugs depend upon the treble ROM that you used as base. In some ROM, system sounds does not work. In MiUI 10, video recording might not work. Game Mode has some issues with global apps.
*FOR VIDEO RECORDING - see this : https://forum.xda-developers.com/showpost.php?p=78219358&postcount=93 ****
*Update GPU drivers for VULKAN support. Link in the links section.***
Performance?
- Better than ZUI 4, smooth as butter, no stutter playing games like PUBG, notifications on time, decent SOT.
Can it be used as daily driver?
- Yes, if you can live with some Chinese texts in certain apps.
Any other thing?
- Because the ROM is ported from Z5 which has a notch, total area of the notification bar cannot be used. To see things like real time network speed and battery "percentage" you have to pull down the notification bar.
What should I do first after booting the device?
- Install play store from App center. Install magisk to remove bloat wares. Install any music app, since there is none. This will make the system optimal for us.
Also, Turn "True Full Screen Mode" ON in display settings for full screen in Apps.
Install Magisk and download and install "SafteyPatch V2" within Magisk to pass safetynet and hide banking apps in magisk hide to use them.
Open security app and give all important permissions to the apps you use, including system apps. Also include them in autorun/whitelist section.
Links?
-Here
ZUI 10
https://drive.google.com/open?id=17lyWnAl0Kjkv5S89wdtw7HglF2072zP5
ZUI 5
Mega link :
https://mega.nz/#!FyxSiI7Y!iZmmVufR6pipX3mwv_-I3HqI714YAMJN1a2zIysinmc
Gdrive link:
https://drive.google.com/open?id=1F_Ou6x2bj26hhdffw45uo4r9qlJuaDb5
MiUi 10 8.11.1 Narshi Shukla - Full Rom
https://androidfilehost.com/?fid=11410932744536996684
MIUI 10 8.11.1 Narshi Shukla - Vendor for twrp recovery: @(THIS VENDOR isnt compatible with all roms, if facing random reboots, use the complete MIUI 10 ROM for the Gsi)
https://drive.google.com/drive/u/0/folders/15QHEUfLMagMV9jZTmlUHa4hkhkNTF-RC
Working GCAM link :
https://www.celsoazevedo.com/files/android/google-camera/f/MGC_6.1.021_FINAL_V1a_A8.1+.apk
VULKAN enabled open GL 3.2 driver link :
https://drive.google.com/folderview?id=11_atz5CDK9bHG4K_ME2LSRFFnxxKqWw2
Credits:
Not my work, I am just sharing it since I found it working.
All credits goes to this Xiaomi thread and bugrevealingbme.
https://*************/threads/zui-5-0-a-only-treble-rom.226/
******************************** FLASHING ISSUE ******************
While flashing this ROM, try to follow the guide above as strictly as possible. Use the ROM that is recommended.
If you are facing bootloop, download the vendor that is provided and restore it in twrp and then flash patch 1 and 2.
Also remember, during each and every step, your TWRP should have system and Vendor mounted. Check after every step.
Your phone might reboot once or twice during first boot, which is not an issue.
How to know if you flashed it correctly?
-If your phone boots into the system with "Lenovo bootanimation" , you flashed it correctly.
If your phone is stuck in "Lenovo - powered by android" splash image for more than 5 minutes, you got something wrong.
*********************************************************************
Screenshots attached :
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
I have one question. If i install a sgsi rom can i back to trenle, non-treble rom just with a simple flash method?
muujeeb said:
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
Click to expand...
Click to collapse
gcamera is working on redmi note 5 pro. should work also here.
muujeeb said:
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
Click to expand...
Click to collapse
GCAM is working.
Notification bug is not there. Only sometimes, it seems that we get late notification.
You have to flash it over Oreo because the GSI is Oreo based. Flashing over pie should work as well, since treble ROM is required. Take a backup of your system so you can restore easily, if you face any issue.
nonamesry said:
I have one question. If i install a sgsi rom can i back to trenle, non-treble rom just with a simple flash method?
Click to expand...
Click to collapse
Yes, you can get back to the ROM you want with simple flash, no problem.
Custom kernel flashable?
ashwinonm said:
Custom kernel flashable?
Click to expand...
Click to collapse
Haven't tested, but should be flashable.
Edit : Custom kernel might brick the device. Will test and update.
Donot flash custom kernel, it causes self restart of device.
Note: Moxie kernels can be flashed, you should flash patch2 after flashing kernels. But, MIUI 10 comes with moxie R5.1 so no use flashing Moxie again.
link not working
Wow it's so beautiful!
I used Arrow OS 8.1 but it got stuck in bootloop and does'nt boot at all.. I followed all the steps accordingly but it did not boot up even after i kept my phone overnight to let it boot. I don't know where i did wrong.
muujeeb said:
I used Arrow OS 8.1 but it got stuck in bootloop and does'nt boot at all.. I followed all the steps accordingly but it did not boot up even after i kept my phone overnight to let it boot. I don't know where i did wrong.
Click to expand...
Click to collapse
Use MIUI 10 port of Narshi Shukla latest build. It works.
May be Arrow OS cannot be used.
You can also try using Vendor of MIUI 10 once. Restore this vendor and the system image of ZUI.
Here is the vendor:
https://drive.google.com/drive/mobile/folders/15QHEUfLMagMV9jZTmlUHa4hkhkNTF-RC?usp=drive_open
kany1 said:
link not working
Click to expand...
Click to collapse
Link is working fine.
jebish7 said:
Link is working fine.
Click to expand...
Click to collapse
yes it is working with mega app
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
---------- Post added at 01:19 PM ---------- Previous post was at 01:13 PM ----------
ok i try to flash it again and boot successflly
marclevine said:
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
Click to expand...
Click to collapse
I think only MIUI 10 rom works flawlessly for this GSI. I will update the main page details and ask to use MIUI 10 only.
You couldnot flash patch 2 because it requires vendor, and may be your vendor is now messed up.
So use MIUI 10 port, it works without any issue.
marclevine said:
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
---------- Post added at 01:19 PM ---------- Previous post was at 01:13 PM ----------
ok i try to flash it again and boot successflly
Click to expand...
Click to collapse
Glad To hear.
So in whatever rom I am in Oreo , I can use that firmware if I use vendor only from your backup? And shouldn't wipe it?
ashwinonm said:
So in whatever rom I am in Oreo , I can use that firmware if I use vendor only from your backup? And shouldn't wipe it?
Click to expand...
Click to collapse
Well, that's how some people got this working, so yes, it's working that way as well. ( Your ROM should be treble based though )
I will attach the "Vendor" file in the main post as well, so other members can use it too.
custom kernel possible,mine running in moxie
Related
***WARNING***
This is NOT an official guide and I'm not affiliated with Offensive Security [ :crying: ].
This is just my personal guide.
I've been playing with this today and lot of my tries ended up with bricking my device.
Currently this method is working, but I am NOT responsible for any bricked devices.
If you never encountered/heard of bootloop/brick, please consider ignoring this tutorial.
DON'T FORGET TO MAKE A NANDROID BACKUP!!!
Hi guys! This is my quick-guide on how to install a Kali NetHunter on Huawei Honor 8.
It's quite simple, just read every step carefully.
This is just a guide. All credits goes to: CyanogenMod , TWRP, Offensive Security
So let's start!
*REQUIREMENTS*
- Rooted device
- Custom recovery TWRP/CWM
- A bit of patience
- Brain
You will need to flash a new recovery image through your old one .
So it's exactly very easy. I've already tested a lot of things and everything is working just fine.
So follow this steps:
1. Download CM 13 for Honor 8 and put it on your SD card. Link here.
2. Download this TWRP image for CM 13 / Honor 8 and put it on your SD card. Link here.
3. Download OpenGApps (Select arm64, 6.0, mini) and put in on your SD card. Link here.
4. Download Kali NetHunter (generic-arm64) and put in on your SD card. Full version: HERE. Minimal version: HERE. Just select the version you prefer. I'm using FULL, but I also tried minimal and it's working fine.
So after you downloaded all the files and you have it on your SD card:
1. Power off your Honor 8
2. When it's already off, press&hold Power and Volume Up button, until your device vibrates and the display starts up.
3. You should now be in your recovery. Press Install and select the TWRP recovery image, which you have downloaded on you SD card. Slide the panel to flash.
4. After you successfully flashed the image, head into main TWRP menu and select Reboot -> Recovery.
5. After you reboot into your recovery, choose cancel, if device ask for password key. If TWRP asks you if you want to allow write access to the system partition. IT IS VERY IMPORTANT THAT YOU ALLOW THIS. Check the box that says to never ask this question again.
6. Do a basic WIPE
7 . Flash the CM 13 then flash GApps
8. !IMPORTANT! Now reboot to your system and complete the basic "First-start" settings. Do NOT flash Kali NetHunter, if you haven't completed the first-time boot settings.
9. When you set up your phone and you are already on your Home Screen, power off your phone and boot to recovery again.
10. Now flash the Kali NetHunter, which you have downloaded on your SD card.
11. After the installation is complete, you can reboot to your system.
12. Press the power button on the Huawei Unlocked Bootloader warning screen. It will take a bit longer to boot than normal. It's completely fine. Just let it be for like 30 secs.
13. Now the Kali Bootanimation will start. Your phone will probably turn off during the bootanimation on your first boot. DON'T PANIC. It's fine. It will automatically restart and boot to your new system.
14. Now open up the NetHunter app. It will ask you for some permissions. It's important to ALLOW all the permissions.
15. After you allowed it all permissions, you can now close the NetHunter app and enjoy your Kali NetHunter
Sorry for my bad English
If you brick your phone, wipe your data and flash everything except the TWRP image again.
It's not my fault if you damage your phone by doing this. Remember that you are doing this on your own risk.
Have fun with your NetHunter on Honor 8
Screenshots:
http://imgur.com/a/8Wdyf
http://imgur.com/a/95dx0
http://imgur.com/a/YBxRS
http://imgur.com/a/E4gZ0
http://imgur.com/a/mkwet
will it works on stock rom??
Do I need to be on a specific build for this or does it not matter?
VenuGopalu said:
will it works on stock rom??
Click to expand...
Click to collapse
Unfortunately no. It requires some components from CyanogenMod.
FreeLineTM said:
Do I need to be on a specific build for this or does it not matter?
Click to expand...
Click to collapse
You mean specific NetHunter build or CyanogenMod build?
I tried one older build of NetHunter and it worked fine as well, but I'm not sure about the CyanogenMod. I think there are only 4 builds of CM13 for Honor 8 and this one is the newest. But I think the older builds would work too.
Flexy' said:
Unfortunately no. It requires some components from CyanogenMod.
You mean specific NetHunter build or CyanogenMod build?
I tried one older build of NetHunter and it worked fine as well, but I'm not sure about the CyanogenMod. I think there are only 4 builds of CM13 for Honor 8 and this one is the newest. But I think the older builds would work too.
Click to expand...
Click to collapse
I mean the EMUI stock build. I'm currently on FRD-L09C432B381
FreeLineTM said:
I mean the EMUI stock build. I'm currently on FRD-L09C432B381
Click to expand...
Click to collapse
Unfortunately no I tried it on stock build but without any success. It definitely requires CyanogenMod
it is working on my phone with stock mm rom ,, the boot animation was awesome ,, it was booted my device well and several apps were installed .i will attach a pic in below
Flexy' said:
Unfortunately no I tried it on stock build but without any success. It definitely requires CyanogenMod
Click to expand...
Click to collapse
I mean what build I need to be on to flash Cyanogen?
---------- Post added at 07:13 PM ---------- Previous post was at 06:55 PM ----------
Stuck on your device is booting now after flashing new TWRP and rebooting to recovery, but can still boot to system and flash old TWRP.
VenuGopalu said:
it is working on my phone with stock mm rom ,, the boot animation was awesome ,, it was booted my device well and several apps were installed .i will attach a pic in below
Click to expand...
Click to collapse
Wow, I couldn't get it working My phone always booted to the EMUI, but none of NetHunter components were installed. Strange.
FreeLineTM said:
I mean what build I need to be on to flash Cyanogen?
---------- Post added at 07:13 PM ---------- Previous post was at 06:55 PM ----------
Stuck on your device is booting now after flashing new TWRP and rebooting to recovery, but can still boot to system and flash old TWRP.
Click to expand...
Click to collapse
Oh, I don't know if there is a build number limitation, but you definitely need MM ROM firmware.
Link to the original CM 13 Honor 8 thread.
Hmm.. Strange. What version of TWRP were you using to flash the Honor 8 one?
Flexy' said:
Wow, I couldn't get it working My phone always booted to the EMUI, but none of NetHunter components were installed. Strange.
Oh, I don't know if there is a build number limitation, but you definitely need MM ROM firmware.
Link to the original CM 13 Honor 8 thread.
Hmm.. Strange. What version of TWRP were you using to flash the Honor 8 one?
Click to expand...
Click to collapse
It's not strange because I was on nougat with latest nougat TWRP when I tried the first time. But I rolled back to mm and completed the steps. However, the data partition was encrypted after rebooting to recovery with the new TWRP. I had to format data then reboot to recovery again. You should add this to the guide.
Flexy' said:
Wow, I couldn't get it working My phone always booted to the EMUI, but none of NetHunter components were installed. Strange.
Oh, I don't know if there is a build number limitation, but you definitely need MM ROM firmware.
Link to the original CM 13 Honor 8 thread.
Hmm.. Strange. What version of TWRP were you using to flash the Honor 8 one?
Click to expand...
Click to collapse
I have tested on twrp-3.0.2-0-frd.img&twrp-3.1.1-0-frd.img both are working without any issue
link for twrp:::: https://dl.twrp.me/frd/
I successfully flashed nethunter on stock Nougat (FRD-L09C432B360).. DriveDroid which is the only thing I want didn't work with stock because it couldn't find USB mass storage. I tried to install it via nethunter instead but it didn't work there either. Might be because I forgot to open nethunter once for setup though..
FreeLineTM said:
I successfully flashed nethunter on stock Nougat (FRD-L09C432B360).. DriveDroid which is the only thing I want didn't work with stock because it couldn't find USB mass storage. I tried to install it via nethunter instead but it didn't work there either. Might be because I forgot to open nethunter once for setup though..
Click to expand...
Click to collapse
Can you tell me how you installed Nethunter on FRD-L09? I am pretty new to this android scene , also you know if the fingerprint sensor works normally?
darkrsing said:
Can you tell me how you installed Nethunter on FRD-L09? I am pretty new to this android scene , also you know if the fingerprint sensor works normally?
Click to expand...
Click to collapse
I don't think fingerprint worked if I recall correctly. I installed NetHunter as any custom ROM if I remember correctly.
I have installed it on Stock rom by using Magisk (and root of course). Very simple, very powerful.
Here's a little info if you have never used treble. ?
https://www.xda-developers.com/how-project-treble-revolutionizes-custom-roms-android-oreo/
Download Treble system-arm64-aonly
https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
This guide is for people coming from emui. If your already on treble see my guide on next thread to switch between different system images without losing data.
I got this Resurrection Remix up and running with gapps and magisk. Copy RR img, gapps and magisk to sdcard or OTG. Because this TWRP you won't be able to use internal storage. YOUR BOOTLOADER MUST BE UNLOCKED AND BE ON OREO UPDATE.
Download open gapps I use arm64 Android 8.1 micro gapps https://opengapps.org
Download Magisk 16.4
https://drive.google.com/file/d/1YftvNNZVruyYgtFE5wFsgLTDDb4Yux5W/view?usp=drivesdk
Need to have this twrp installed. Here --https://drive.google.com/file/d/1ZYo7Ndte3vlLcUSadD6jIgfBi1oxa0Pb/view?usp=drivesdk put twrp in adb folder
In adb in fastboot mode "fastboot flash recovery_ramdisk
complete_twrp_ramdisk.img"
After flash hold POWER VOLUME UP AND VOLUME DOWN IF YOU HAVE USB CONNECTED. OR JUST VOLUME UP PLUS POWER IF YOU DISCONNECT USB. TO REBOOT TO TWRP.
In TWRP select advanced wipe and wipe everything but sd card. Go to wipe again and select format data type yes. In TWRP hit reboot, reboot to recovery. Once back in recovery touch install. On bottom right select install image. Now find system-64-aonly img and select it. It will ask you where you want to install it, scroll down and select system image. Should take about a minute to install. Now reboot to system. After your in system reboot to twrp and flash gapps. After that select wipe format data. Reboot back to system and setup Google play services. Finally flash magisk for root in TWRP. ITS IMPORTANT TO INSTALL IN THIS ORDER OR YOU WILL END UP HAVING ISSUES WITH PLAY STORE AND INSTALLING APPS.
People that are getting uncertified play services error here is the APk to get your Google services device id. https://drive.google.com/file/d/1YjNZuS3RfSrQ7DnmzOZMH74I63fmHGwN/view?usp=drivesdk
Once you get your id go here and copy it in.
https://www.google.com/android/uncertified/
IT HAS EDGE GESTURES ????
I updated the installation flashing instructions on 6/2 added how to switch between different treble GSI system images. Below -------V
BUGS?
VOLTE NOT WORKING
THEME IN RR CONFIGURATION SETTINGS DOESNT WORK.
ANYONE ELSE NOTICE ANY BUGS LET ME KNOW SO I CAN ADD TO BUGS LIST.
Here's the Generic System Image List
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Thought I would make a guide for people who would like to test different treble GSI. So if you already on treble and would like to try a different one. This guides for you. Backup all your apps in titanium backup you can save them to internal storage. Copy system.img to SD card or usb to otg.
Download these gapps and copy to SD card to. https://drive.google.com/file/d/1Jz9gFWTUqKWr2y4X6FXIt5wQbR1-TrFH/view?usp=drivesdk
The reason using these gapps is because normal open gapps are to large and you will get an error in twrp saying not enough system storage available.
Boot to twrp and go to advanced wipe and wipe system data cache and dalvik. Don't wipe internal or SD card. Than flash system.img. Boot to system. Boot back to twrp and flash gapps. Go to advanced wipe and wipe data. Reboot to system. That's it, now you can test different treble gsi. Good luck.
Currently not booting GSI'S are DU and AEX.
This install process works with the other treble ROMs too for anyone interested.
Sent from my Honor 7X using XDA Labs
Has anyone successfully gone from a Treble based ROM (AOSP, LOS, RR, ECT) back to a fully working stock? These 1 off pages are great for information on flashing, but if we could create a generalized WIKI or something, that would be very helpful for everyone.
smokinjoe2122 said:
Has anyone successfully gone from a Treble based ROM (AOSP, LOS, RR, ECT) back to a fully working stock? These 1 off pages are great for information on flashing, but if we could create a generalized WIKI or something, that would be very helpful for everyone.
Click to expand...
Click to collapse
Either restore a twrp backup or flash the stock system image.
Sent from my Honor 7X using XDA Labs
Great but if you just want rr without root you can use fastboot flash
BTW I prefer the custom build here bcs it has huawei camera app built in but the ROM not update for some time
optionalmgrr.la said:
Great but if you just want rr without root you can use fastboot flash
BTW I prefer the custom build here bcs it has huawei camera app built in but the ROM not update for some time
Click to expand...
Click to collapse
Or you could just not flash magisk.
Sent from my Honor 7X using XDA Labs
allrockedout said:
I was having issues with play store now everythings working
Click to expand...
Click to collapse
What issues were you having, I can't seen to get some apps to open from playstoreb while others do.
jmoss1972 said:
What issues were you having, I can't seen to get some apps to open from playstoreb while others do.
Click to expand...
Click to collapse
You need to do flash system.img boot to system. Boot back to TWRP flash gapps. Factory data reset. And than boot to system. Pain in the ass I'm on AOSIP now. Took me forever to figure it out. After reboot apps weren't opening. Just keep trying clean install.
Thanks, I also ended up flashing AOSP vanilla and pico gapps and no issues with play store. Now if I could figure out how to make a proper back up I can use in TWRP.
jmoss1972 said:
Thanks, I also ended up flashing AOSP vanilla and pico gapps and no issues with play store. Now if I could figure out how to make a proper back up I can use in TWRP.
Click to expand...
Click to collapse
I know the p10 lite TWRP will let you backup data and system. But I've had some trouble booting into the p10 lite TWRP. Maybe need to install via fastboot I'm not sure. But I have a backup of system data kernel and boot made with p10 TWRP for stock emui that works perfect.
I want to install Resurrection Remix 7x specific build because it has Huawei camera built-in
BUt it hasn't been updated for long time @surdu_petru
https://forum.xda-developers.com/honor-7x/development/rom-t3765201
Treble build (AOSP or RR) seems more stable but they don't have Huawei camera...................
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
https://forum.xda-developers.com/pr.../huawei-stock-camera-app-treble-roms-t3735169
optionalmgrr.la said:
I want to install Resurrection Remix 7x specific build because it has Huawei camera built-in
BUt it hasn't been updated for long time @surdu_petru
https://forum.xda-developers.com/honor-7x/development/rom-t3765201
Treble build (AOSP or RR) seems more stable but they don't have Huawei camera...................
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
https://forum.xda-developers.com/pr.../huawei-stock-camera-app-treble-roms-t3735169
Click to expand...
Click to collapse
I have found a magisk module that is the hauwei stock camera. Don't remember where that was. Maybe you can find it
I don't want root though.... bu tthx!
Cannot find Edge gestures.
Cannot find edge gestures. Help please
mrmazak said:
I have found a magisk module that is the hauwei stock camera. Don't remember where that was. Maybe you can find it
Click to expand...
Click to collapse
I tried the p20 port and honor 10 camera ported but they don't work. P20 port I'm able to launch camera but the app force closes. If we could get a stock camera working that would be amazing.
Someone's just posted this haven't tested https://androidfilehost.com/?fid=746163614322262817
Adithya Krishnakumar said:
Cannot find edge gestures. Help please
Click to expand...
Click to collapse
Settings/configurations/gestures
allrockedout said:
I tried the p20 port and honor 10 camera ported but they don't work. P20 port I'm able to launch camera but the app force closes. If we could get a stock camera working that would be amazing.
Someone's just posted this haven't tested https://androidfilehost.com/?fid=746163614322262817
Click to expand...
Click to collapse
I'll give it a try
---------- Post added at 01:16 AM ---------- Previous post was at 12:43 AM ----------
Failed when I tried flashing.
---------- Post added at 01:18 AM ---------- Previous post was at 01:16 AM ----------
allrockedout said:
I know the p10 lite TWRP will let you backup data and system. But I've had some trouble booting into the p10 lite TWRP. Maybe need to install via fastboot I'm not sure. But I have a backup of system data kernel and boot made with p10 TWRP for stock emui that works perfect.
Click to expand...
Click to collapse
Did you flash the p10 lite TWRP IMG in TWRP?
jmoss1972 said:
I'll give it a try
---------- Post added at 01:16 AM ---------- Previous post was at 12:43 AM ----------
Failed when I tried flashing.
---------- Post added at 01:18 AM ---------- Previous post was at 01:16 AM ----------
Did you flash the p10 lite TWRP IMG in TWRP?
Click to expand...
Click to collapse
Yeah but magisk or something causing issues. I've gotten it through fastboot on emui in the past.
I'll try it, hopefully if it fails I can still use the TWRP I have installed.
Okay I still haven't gotten camera working, but here are the steps to install any Android 10 GSI.
1. Flash MIUI 10.3.2.0 (or below).
2. Wipe everything except vendor (and internal BUT wipe data)
3. Install any Android 10 image
4. Mount vendor and delete the following files:
/vendor/lib/libcutils.so
/vendor/lib64/libcutils.so
4. Make sure you flash Acrux v4 (the latest in my Telegram channel, @acruxci)
5. Flash permissiver (v4!) and a dm-verity/force enc disabler (you can find these on Google)
6. Flash Android Q zygote fix
Magisk can be flashed but at your own risk!
The last bug is camera - can people please experiment and get back to me on if you found a fix.
Flash magisk at your own risk!
My PayPal if you wanna donate : http://paypal.me/nysadev
Great info! Thanks nysadev.
@nysadev Do you have a suggestion for the right recovery to use? What do you use?
I use TWRP, but there is only an unofficial version, that is really buggy and gives me a lot of errors. I am able to install custom roms with it, but I don't want to risk a gsi rom. I really want to experiment with the new gsi
I have a small problem. After installing, when it reaches the home screen and the launcher icons are visible and then it restarts.
After rebooting and it stays in boot logo.
I use Acrux-Stable-r2-Sky because the r4 version doesn't install me.
Thank you.
nysadev said:
Okay I still haven't gotten camera working, but here are the steps to install any Android 10 GSI.
1. Flash MIUI 10.3.2.0 (or below).
2. Wipe everything except vendor (and internal BUT wipe data)
3. Install any Android 10 image
4. Mount vendor and delete the following files:
/vendor/lib/libcutils.so
/vendor/lib64/libcutils.so
4. Make sure you flash Acrux v4 (the latest in my Telegram channel, @acruxci)
5. Flash permissiver (v4!) and a dm-verity/force enc disabler (you can find these on Google)
6. Flash Android Q zygote fix
Magisk can be flashed but at your own risk!
The last bug is camera - can people please experiment and get back to me on if you found a fix.
Flash magisk at your own risk!
My PayPal if you wanna donate : http://paypal.me/nysadev
Click to expand...
Click to collapse
Thanks for your work dude ??
My mi8 lite don't installed a Android 10 rom, showing my cellphone don't have storage (???)
lenardinho said:
My mi8 lite don't installed a Android 10 rom, showing my cellphone don't have storage (???)
Click to expand...
Click to collapse
Restart the system and try again.
---------- Post added at 10:21 ---------- Previous post was at 10:16 ----------
nysadev said:
Okay I still haven't gotten camera working, but here are the steps to install any Android 10 GSI.
1. Flash MIUI 10.3.2.0 (or below).
2. Wipe everything except vendor (and internal BUT wipe data)
3. Install any Android 10 image
4. Mount vendor and delete the following files:
/vendor/lib/libcutils.so
/vendor/lib64/libcutils.so
4. Make sure you flash Acrux v4 (the latest in my Telegram channel, @acruxci)
5. Flash permissiver (v4!) and a dm-verity/force enc disabler (you can find these on Google)
6. Flash Android Q zygote fix
Magisk can be flashed but at your own risk!
The last bug is camera - can people please experiment and get back to me on if you found a fix.
Flash magisk at your own risk!
My PayPal if you wanna donate : http://paypal.me/nysadev
Click to expand...
Click to collapse
Hello, when you say i can install GSI from android 10 can i install either, or have you tested any specific?
I can try to solve the camera problem.
I tried and it don't work
filipehack2015 said:
Restart the system and try again.
---------- Post added at 10:21 ---------- Previous post was at 10:16 ----------
Hello, when you say i can install GSI from android 10 can i install either, or have you tested any specific?
I can try to solve the camera problem.
Click to expand...
Click to collapse
Probably either, since he said "any" android 10 image
Aby news?
What do I need to select when installing Android 10 image? (boot, system image...).
** Post updated on 01/10/19 to include AOSiP GSI **
After trying out a lot of Android 10 GSIs, I have managed to get Lineage OS 17 and AOSiP GSI builds by Erfan to run on Mi Max 3. Thanks to the Dev erfanoabdi and his team who have worked on these.
On Mi Max 3 they are very smooth when they are working. However, certain apps can trigger freezing episodes or forced reboots. AOSiP seems smoother and more stable for now. Both are almost stock with no customization. Over all they are still buggy, just usable, and not reliable.
I am not a developer! Try at your own risk!!
** PLEASE NOTE: You would need to be on one of the AOSP- or LOS-based custom Pie Roms with firmware version 9.9.3 (as base) before flashing this rom. Havoc and AEX have been confirmed to work**
Here are the steps
What you would need:
1. GSI Android 10 Rom:
a. Lineage 17 GSI by Erfan: lineage-17.0-Aonly-10-20190909-ErfanGSI.img.7z
b. AOSiP
2. Permissiver_v4.zip
3. FixZygote_v2.zip
4.open_gapps-arm64-10.0-nano-20190920-UNOFFICIAL.zip
5. Magisk 19.4
6. Any file extractor app. I used ZArchiver from Play store.
Installation Steps.:
1. Extract system image from Android 10 GSI zipped file using app of your choice (ZArchiver in my case)
2. Boot into your recovery (I used Nijel's TWRP 3.2.3-3 and 3.2.3-4)
3. Back up your current ROM
4. Wipe data, system, art/davlik and cache
5. Tap install. Then tap ''Image''. Then select the (extracted) Lineage-17 system image, then tap System. Swipe to install.
6. Install Permissiver_v4 zip file.
7. Install FixZygote_V2 zip file
8. Install Magisk 19.4 zip file.
9. Boot into system. Tap ''OK'' on the screen pop up.
10. Reboot into TWRP.
11. Install OpenGaps.
13. Reboot system and set up your phone.
14. Reboot phone and start using.
What works
1. Mobile data, Wifi and bluetooth
2. Phone calls and messaging including dual sim
3. Playstore
4. Rooting with Magisk
5. Finger print reader
6. Gestures are amazing. Dark mode great!
Bugs
1. Stock camera and torch light do not work.
2. Slider does not control brightness
3. Chrome browser freezes. . Firefox and Via browser running smoothly.
4. Camera and video apps force-close or cause random reboots
Where are the links to the packages and why you install two different gapps (Bitgapps&Opengapps)???
L_e_x_t_e_r said:
Where are the links to the packages and why you install two different gapps (Bitgapps&Opengapps)???
Click to expand...
Click to collapse
There are no links to the packages as I wasn't certain of the XDA rules on links to other websites. Just google them and they are easy to find.
I tried just open gapps or just BitGaps and didn't work. Flashing BitGaps first appeared to point the Open Gapps to the right partition, and that worked.
Thanks for posting but very confusing without links. I know what mean about the rules but you can link the page for the GSI not the download etc
shingers5 said:
Thanks for posting but very confusing without links. I know what mean about the rules but you can link the page for the GSI not the download etc
Click to expand...
Click to collapse
I understand.
Thanks to the Nesh Patel at Tweakguy for the links.
My thanks to the devs who have worked on these.
Here are the links:
For Lineage GSI: https://github.com/resk84/releases/...ineage-17.0-Aonly-10-20190909-ErfanGSI.img.7z
For permissive: https://androidfilehost.com/?fid=600693192411788649
For bitzygote:
https://androidfilehost.com/?fid=1395089523397961748
Permissive link not working
shingers5 said:
Permissive link not working
Click to expand...
Click to collapse
Missed one digit at the end.
Permissiver link:
https://androidfilehost.com/?fid=6006931924117886495
This won't boot on global mix max 3 boot loop with both Nigel mod and orangefox recoveries. No work for global 4gb 64gb ROM model
shingers5 said:
This won't boot on global mix max 3 boot loop with both Nigel mod and orangefox recoveries. No work for global 4gb 64gb ROM model
Click to expand...
Click to collapse
I was on the latest Havoc Rom for Mi Max 3. Also my hardware is 6GB 128GB.
I tried a lot of the Android 10 GSIs and this was the only one that booted. The sequence has to be exactly same as in my post to boot.
Also, I don't know if it may have to do with your vendor. I didn't wipe and then flash the device-specific vendor firmware as suggested in some GSI how-to's.
So you were on an android pie ROM and flashed android 10 over it without wipe? I was on miui 11 before flash on global device
shingers5 said:
So you were on an android pie ROM and flashed android 10 over it without wipe? I was on miui 11 before flash on global device
Click to expand...
Click to collapse
Yes Havoc Pie Rom. I wiped davlik/art, system, data and cache only. Then proceeded exactly as outlined in my post. I have just flashed the LOS 17 again with my steps and it boots.
stonesolouk said:
Yes Havoc Pie Rom. I wiped davlik/art, system, data and cache only. Then proceeded exactly as outlined in my post. I have just flashed the LOS 17 again with my steps and it boots.
Click to expand...
Click to collapse
first attempt
i had derpfest AOSIP so i flashed LOS 17 over that with no wipe then the permissive and fix zip and it booted with errors. gestures for home works but edges dont. also kept fail on system etc
2nd attempt
flashed derpfest AOSIP then reboot
back to recovery then wipe as you did flash LOS17 then permissive and fix zips then reboot. boots up but same as before home gesture works and dark mode etc but edges don't. the bitgapps dont flash and open gapps nano causes bootloop on its own
3rd attempt gonna try with firmware 9.9.3 and flash without wipe vendor like the old days to see what happens
Got it good as I can for now
Flashed and booted AEX 6.7
Back to recovery and wiped as you say and not vendor
Flashed LOS 17 image then permissive and fix zips and magisk
Reboot
Didn't need flash 2 gapps just open gapps nano and reboot
Seems good apart from obvious
Brightness doesn't work
Camera
Battery drain very high
shingers5 said:
Got it good as I can for now
Flashed and booted AEX 6.7
Back to recovery and wiped as you say and not vendor
Flashed LOS 17 image then permissive and fix zips and magisk
Reboot
Didn't need flash 2 gapps just open gapps nano and reboot
Seems good apart from obvious
Brightness doesn't work
Camera
Battery drain very high
Click to expand...
Click to collapse
That's great. It settles down after a few more boots. I will update my post with your findings.
Brightness and all edge gestures work for me though.
stonesolouk said:
That's great. It settles down after a few more boots. I will update my post with your findings.
Brightness and all edge gestures work for me though.
OK cool. Hopefully someone can get it working fully or at least stable enough for daily use
Click to expand...
Click to collapse
And what about the AOSIP-Aonly-10-20190924-ErfanGSI.7z? Do I flatten the Lineage-17.0-Aonly-10-20190909-ErfanGSI.img or do I have to decide between one of them?
Does not herfor from the instructions
rudiratlos57 said:
And what about the AOSIP-Aonly-10-20190924-ErfanGSI.7z? Do I flatten the Lineage-17.0-Aonly-10-20190909-ErfanGSI.img or do I have to decide between one of them?
Does not herfor from the instructions
Click to expand...
Click to collapse
Yes it is one or the other.
You could try each one separately, then decide the one you prefer. AOSiP seems more fluid and stable.
Thank you for your prompt reply
What's the report on AOSIP as I haven't tried it yet. Wish someone would take the gsi and get it stable
shingers5 said:
What's the report on AOSIP as I haven't tried it yet. Wish someone would take the gsi and get it stable
Click to expand...
Click to collapse
It is smoother and more stable compared to LOS 17 but brightness slider and camera still don't work.
Used MIUI Based for Pocophone F2 Pro, Mi 9T, Mi 9T Pro
First version for Mi 8, Mi 8 Lite, Mi 8 SE, Mi 8 Pro
Before starting you will need to have the bootloader unlocked and have a custom Recovery (Keep in mind that the instructions in the previous links are generic, your device may require additional steps, check the forums of / XDA Developers in the section of your device for alternative instructions)
The OneOS team is not responsible for any lost data or damage caused to your device, all roms before being published are rigorously tested. Please read the instructions provided carefully
The steps to install are very simple, if you follow them to the letter, no problem will arise.
Download OneOS for your device
Make a backup of all your data, synchronize a copy of Xiaomi Cloud and Google, make a backup of WhatsApp, and all your photos and files in the internal memory
Reboot the device in Recovery
Go to the Wipe tab and perform a "factory format" which forces you to write "yes" on the screen
Reboot back into recovery
Transfer the previously downloaded OneOS file to internal memory
Go to the "install" tab
Select the OneOS file
Once installed, reboot (boot may take 10 to 15 minutes)
Update to new version of OneOS:
Unless otherwise indicated, it will not require any wipe
Download the OneOS update, you can do it from the updater itself, this is automatic and does not require a manual download.
If you have opted for the manual download of the update, you have two options:
From the OneOS updater select the installation package that you just downloaded
From Recovery, in this case, restart in Recovery, click on the "install" tab and select the file previously downloaded. If you did it from the computer, first you must transfer the file to the internal memory of the device. Once the installation has concluded, restart in the system and wait 10/15 minutes for it to boot.
ALL INFORMATION ON SITE: https://one.revtechs.me/en/
MOD EDIT: Telegram link removed, please read the STICKY!
I dont know why this rom is not present here but is one of the best , based on MIUI BASE..
every information can find on web site or telegram group..
I am using it for a week and it awesome,stable smooth.. try it for yourself..
Is SELinux enforced in this ROM?
does this have call recording?
mmhs said:
does this have call recording?
Click to expand...
Click to collapse
yes.
Update 201117
---------- Post added at 01:36 PM ---------- Previous post was at 01:19 PM ----------
New version from today!
This is the best ROM that I ever use.
I don't sucess to flash magisk 20.4 on this rom (magisk manager don't recognize the magisk 20.4 installation)
Can you write additional features present in this rom except of xiaomi.eu and official rom features
mekton said:
I don't sucess to flash magisk 20.4 on this rom (magisk manager don't recognize the magisk 20.4 installation)
Click to expand...
Click to collapse
Use Magisk Canary
pakom8 said:
Use Magisk Canary
Click to expand...
Click to collapse
with this version (magisk-debug.zip Update Canary Channel: Upstream to 1469b82a) on https://github.com/topjohnwu/magisk_files/tree/canary ?
mekton said:
with this version (magisk-debug.zip Update Canary Channel: Upstream to 1469b82a) on https://github.com/topjohnwu/magisk_files/tree/canary ?
Click to expand...
Click to collapse
yes that one
I'm in LOVE with this ROM.......awesome!!!
What is battery backup on this rom ?
paclaco said:
I'm in LOVE with this ROM.......awesome!!!
Click to expand...
Click to collapse
Looks like regular MIUI Eu to me.
mookiexl said:
Looks like regular MIUI Eu to me.
Click to expand...
Click to collapse
Miui EU dont have center clock, dont have options to configurate colors on status bar, and more options and one os have better batery Life.
In my opinion is better option if you have Xiaomi base.
Is diferent.....taste It and tell me after.
Does it pass safetynet?
Their latest changelog and EU MIUi latest changelog is pretty similar. ?
Edit : digged up even more to their website, and found that they also used EU MIUi as based roms as well CN Dev Rom, so yeah, it makes sense that their changelogs are about the same, This Rom looks solid overall though, planning to flash this rom later.
flor90 said:
Does it pass safetynet?
Click to expand...
Click to collapse
https://youtu.be/yMznuKMvBwg
I have oneos with magisk and safety net success, someone knows if the update requires the same procedure for safety net success, I am on the previous version and it seems wonderful
I'm really impressed with oneos. Flashing from eu stable 12.1.3.0 using TWRP. Just format data. Flashed magisk canary. I'm only playing an hour with it, but no problems with booting or disappearing TWRP (I'm using 3.4.2b). Didn't have to use fastboot. GPS was funky on the first try (low number of satellites), but looks that it's ok now. So far no problems
Can anyone comment on what dialler it uses? Google or Xiaomi?