Database Users

booting failed

Help.
Booting failed. After downloading "[LINUX] Universal Nexus Linux Toolkit v1.0 (Unlock, Lock, Root, CWM, Factory Reset)" and ran Unlock the bootloader, Flash CWM recovery (Standard or Touch), Root the phone, I didn't foud anything change (not like my cellphone, I can select recovery mode when long push the powerbutton off button), so I made a decision (I beleve that's a huge mistake), I did lock the bootloader and flash Google Factory Image. Finally I realised I couldn't boot OS, but I found at the begining of power on, I could choose "start" "restart bootloader" "recovery mode" "power off" , It said booting faild if I select start or recovery mode.
Is there any way to rescue my tablet?

I have not used that tool.. But i believe you were to have a rom on your data/ media partition on your tablet then boot into recovery and flash the rom.. Sounds like your tablet just has no rom on it.. Try to adb push a rom to data /media then go into cwm and flash it .. you can use the nexus tool kit to do this if you do not know how..
Good Luck...
---------- Post added at 06:48 PM ---------- Previous post was at 06:43 PM ----------
oops misread . your saying you can not get to recovery.. Try holding both vol up and down together and then power button from a off state . Before i would say 20 seconds you should get a hard reset.. if not the recovery/ rom flash failed.. You will need to use a Nexus tool kit to put the recovery and rom back.. or use fastboot to push recovery.. boot into recovery and install flash rom....
Sorry

can't see device with usb or adb
I have the same problem. Unforunately, I can't see my device with adb or in windows via the usb port. Without these I can't use the Nexus 7 toolkit. Any idea what I should try next?

jackjsa said:
How Unbrick nexus 7!!
1) Download the factory. image of nexus 7 before by this https://developers.google.com/android/nexus/images.
2) nexus 7 root toolkit for the advanced. utilities it. (Lower left corner of the application), then click Launch.
3) mode is advanced tool you see Quick tools (on the left), select Fastboot-Bootloader me. The middle section (Boot / Flash image) to Flash (Permanent).
4) the file you downloaded from the first) is to run it using 7zip. Do not have a zip file. Recommend that if you are exhausted. The file extension. . Img me into the same folder (for ease of flash. And protection against flash files!) 7zip app and all programs in the community. Reload this App Play Store: https://play.google.com/store/apps/details?id=org.joa.zipperplus7.
Computer loaded from this link. http://www.7-zip.org/download.html.
5) flash file system before the first Boot Click Boot and select the file from 4) the file named boot.img it.
6) flash the Bootloader on file bootloader-tilapia-4.18.img. (The grouper tilapia could be it. If you use the nexus 7 Wifi only).
7) flash the Radio / Baseband file name. radio-tilapia-1231_0.17.0_1205.img it.
8) flash File Recovery file name. recovery.img it.
9) flash file system on the order Userdata System and select the file system.img userdata select userdata.img.
10) completed it. Your machine will reboot. I do not drink coffee.
11) Enjoy! ^ _ ^.
You. Ban flash the wrong files here. I need the name of the file. The only way to tell!
I flash rom 0.2 the risk. I should be very careful.
0.3 If this is the case, you Softbrick it. (Hardbrick may not), then I try this method worked 100%.
There is a 0.4 credit, I thought I was the way I make them up. I want to share with. Please add credit to it. If one on me. Help bring this up with the group, thank you.
0.5 If there is another one your way. The mind of the South. (I have yet to try it as I work) and I like that we do not have information on the nexus (the brick that we do not backup data).
Ways.
First. Downloaded SDK from this link.
http://developer.android.com/sdk/index.html.
Two. Then double-click. Extract the files placed on the desktop.
Three. Downloaded Factory Image (create a new folder and then extract the files to put in it).
. 4 Factory Image extracted successfully, look for a file named flash-all, right-click the file and select edit, then go to delete off-w, then Save and come out.
5. Adt-bundle up to see two folders. Click to select the sdk folder and then uncompress the Factory Image files Copy all (6 files) and put it in a folder. platform-tools.
6th. Then double click the flash-all then lay in wait for a while to update it back to Factory Image kosher by the data is lost. Mod it to disappear, they are only dancing, etc. (it's new to flash).
Note: Do not forget to delete off-w, otherwise everything totally disappeared.
Suggested: do not open a cmd without the headache type. Not faced with the annoying Waiting for device.
0.6 Read carefully and understand it before doing it. Because many steps too. And all the way I say. In the computer, you must install the drivers and I!
It's .7 stock rom nexus 7 Wifi version, select nakasi (grouper) it. The Model 3G or 3G + Wifi. Select nakasig (tilapia).
0.8 I thank everyone. And all the comments too. I suggest that the nexus 7 brick.
0.9 If a brick at me because I was pushed to the nexus 7 root tool v 5.0 to flash stock rom just to watch a lot of this toolkit. + audio bug bit orchestrated. I recommend the use of or nexus root toolkit v1.6.3 wugfresh it.
Click to expand...
Click to collapse
Please stop posting the same thing in every thread; it's not helpful.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 7 using Tapatalk HD

korockinout13 said:
Please stop posting the same thing in every thread; it's not helpful.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
Sorry, I just want to help!

boot failed
tuuss said:
Help.
Booting failed. After downloading "[LINUX] Universal Nexus Linux Toolkit v1.0 (Unlock, Lock, Root, CWM, Factory Reset)" and ran Unlock the bootloader, Flash CWM recovery (Standard or Touch), Root the phone, I didn't foud anything change (not like my cellphone, I can select recovery mode when long push the powerbutton off button), so I made a decision (I beleve that's a huge mistake), I did lock the bootloader and flash Google Factory Image. Finally I realised I couldn't boot OS, but I found at the begining of power on, I could choose "start" "restart bootloader" "recovery mode" "power off" , It said booting faild if I select start or recovery mode.
Is there any way to rescue my tablet?
Click to expand...
Click to collapse
I got error while flashing and then after power up git little note "boot failed"
I tried to get into fastboot mode, few times i got fastboot but it was not responding and adb saw no devices. after few attemps i got working fastboot mode and then flashed it as normal.

[GUIDE] How to upgrade from Marshmallow B510 to B521

It's a pretty straightforward guide. Just follow the guide carefully and you'll be in no time rocking with B521.
This guide is divided into 5 sections. Follow all sections in the order illustrated in the guide.
Optional Step (Recommended) : Flash Stock B510
It is generally a good idea to start from a completely fresh base. Although not necessary, you will however, loose all your data and apps. Backup what is important before following. ​
Flash Stock Recovery (see Step 4 below)
Download B510 from here: https://mega.nz/#!NYgUFYLA!wEEf0f3w_6wxbzr9TYTvTquGBUhsMmRG53G8RSp2xMQ
Copy the Update.APP in the downloaded B510 ROM to dload folder in the root of your external SD card.
Power off your device.
Hold Volume Down, Volume Up and Power buttons simultaneously until you see the Honor logo. Your device will now automatically flash the whole Update.APP
Step 1 : Flashing Custom Recovery (TWRP in this case)
If you are already on TWRP, then skip this section.​Before you follow make sure you have installed Huawei HiSuite and ADB/Fastboot Tools. If not see the links below:
Huawei HiSuite: http://consumer.huawei.com/minisite/HiSuite_en/
ADB and Fastboot: https://drive.google.com/open?id=0B0LG0AQ4V9FpcXRmV1BmRk1Ta1k
Extract the ADB and Fastboot zip to any preferred location.
Instructions
Download TWRP 3.0.1 Recovery. Head to this thread for download links: http://forum.xda-developers.com/honor-4c/development/recovery-twrp-3-0-0-0-huawei-honor-4c-t3349495 Copy the downloaded recovery to the folder where you have extracted ADB and Fastboot tools.
Power off your device.
Now while holding Volume Down button attach your device to computer via USB cable. Your device will now automatically switch to Fastboot mode.
In the folder where Recovery and Fastboot tools are present, hold down left shift button and simultaneously press Right mouse button. In the dropdown menu, select Open Command Window here.
Switch to the Command Prompt window and type:
Code:
fastboot flash recovery recovery_name.img
Replace recovery_name with the downloaded recovery's file name.
You have successfully installed TWRP :victory:
Step 2 : Enable Local OTA Update option in Marshmallow
In Marshmallow, Huawei has removed the option to flash OTA updates and Update.APP through the Local Update. Lets get that option back!​Credits to this section goes to OXALIS at 4pda.ru for making the patch to enable Local Update option in Huawei Update app.
Download the Huawei Update patch from this link: https://drive.google.com/open?id=0B0LG0AQ4V9FpUXUybmFZeTVXNDg Copy it to either your device's internal memory or a SD card.
Power off your device.
Hold Power and Volume Up buttons simultaneously to boot your device to recovery.
Install the zip downloaded in the first step though TWRP.
Step 3 : Removing Root
If your device is currently not rooted and is completely stock, you can skip this section.​
Before you follow make sure you have installed Huawei HiSuite and ADB/Fastboot Tools. If not see the links below:
Huawei HiSuite: http://consumer.huawei.com/minisite/HiSuite_en/
ADB and Fastboot: https://drive.google.com/open?id=0B0LG0AQ4V9FpcXRmV1BmRk1Ta1k
Extract the ADB and Fastboot zip to any preferred location.
Removing Root
Download Stock Marshmallow boot image from here: https://drive.google.com/open?id=0B0LG0AQ4V9FpY1lBVF9ubFdOSXM Copy it to the folder where you have extracted ADB and Fastboot.
Power off your device.
Now while holding Volume Down button attach your device to computer via USB cable. Your device will now automatically switch to Fastboot mode.
In the folder where Recovery and Fastboot tools are present; hold down left shift button and simultaneously press Right mouse button. In the dropdown menu, select Open Command Window here.
Switch to the Command Prompt window and type:
Code:
fastboot flash boot stock_boot_mm.img
Open SuperSU app and click on "Full Unroot" in Settings.
Your device is now unrooted.
Q. Why not just click the 'Unroot" option in SuperSU app?
Although that would work as it does the same the same thing described above i.e. replace patched ramdisk with stock backup, if the backup isn't present (such as you made a Factory Reset), your ramdisk will remain patched even though unrooted. It's good idea to revert to Stock boot.img if you ever need to root again.
Step 4 : Flashing Stock Recovery
It has been literally mentioned a thousand times that you can't flash official ROMs and OTAs through a custom recovery (such as TWRP). You have to be on Stock Recovery.​
Before you follow make sure you have installed Huawei HiSuite and ADB/Fastboot Tools. If not see the links below:
Huawei HiSuite: http://consumer.huawei.com/minisite/HiSuite_en/
ADB and Fastboot: https://drive.google.com/open?id=0B0LG0AQ4V9FpcXRmV1BmRk1Ta1k
Extract the ADB and Fastboot zip to any preferred location.
Instructions
Download the Marshmallow Stock EMUI Recovery from here: https://drive.google.com/open?id=0B0LG0AQ4V9FpbldwYWExOGNTUTQ Copy the recovery to the location where you have extracted ADB and Fastboot tools.
Power off your device.
Now while holding Volume Down button attach your device to computer via USB cable. Your device will now automatically switch to Fastboot mode.
In the folder where Recovery and Fastboot tools are present; hold down left shift button and simultaneously press Right mouse button. In the dropdown menu, select Open Command Window here.
Switch to the Command Prompt window and type:
Code:
fastboot flash recovery stock_recovery_mm.img
You have successfully installed Stock Recovery :victory:
Step 5 : Updating to B521
Download the B521 OTA zip from here: https://drive.google.com/file/d/0BxgU9yQssu83NTJ6eFBseS1ET3c/view?pref=2&pli=1 (Credits goes to vit755 at 4pda.ru)
Rename the downloaded zip to update.zip and copy it to dload folder in the root of your external SD card.
In your device, open Settings and tap on Update.
Tap the Menu button and then Local Update
Tap the Incremental Update option.
Your device will now reboot to install the update.
Tada! You're done! (Hit thanks if you found this guide useful)

It worked. Now on B521.
Thanks bro

Can anyone provide the changelog for this? is it worth installing over b510?

Help pls.. After installing the update using Huawei updater, the installation got stuck at around 92% so I had to reboot my phone, but now it's stuck in boot loop... I tried flashing the stock Marshmallow rom but I keep on getting install error on forced SD upgrade... My phone version is balong right now..
Edit: I flashed the stock Malaysian Lollipop using forced upgrade and my phone is working again

SU and TWRP after upgrade
Can i revert to SU and TWRP after upgrade to b521?

Boot problem
After install stock_boot_mm.img the phone doesn´t boot. Someone with same problem? I can restore the system with TWRP but i can´t install B521.
Help please.

You need stock boot and stock recovery.
Try this

rauloraulon said:
After install stock_boot_mm.img the phone doesn´t boot. Someone with same problem? I can restore the system with TWRP but i can´t install B521.
Help please.
Click to expand...
Click to collapse
Are you sure you're on B510. The boot image has been extracted from B510 Update.APP so it should work on all CHM-U01.

I'm on BalongC52B311, CHC—U01, Android 6.0. I suposed equal to B510. Isn´t it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

rauloraulon said:
I'm on BalongC52B311, CHC—U01, Android 6.0. I suposed equal to B510. Isn´t it?
View attachment 3750465
Click to expand...
Click to collapse
The CHC-U01 will not work. You have to manually upgrade to B510 first.
The most easiest method is to downgrade to C636B330 and upgrade to B510.

Finally, B521
rauloraulon said:
I'm on BalongC52B311, CHC—U01, Android 6.0. I suposed equal to B510. Isn´t it?
View attachment 3750465
Click to expand...
Click to collapse
I get it. B521 installed and running.
I must to do a clean installation of B510, patch with TWRP for activate local updates, install the stock recovery and update to B521. :victory:
My phone didn´t enter in fastboot mode, so i enter with " adb reboot-bootloader".
TWRP 3.0 didn´t work for me. I used TWRP 2.8..7.0 hw4c (recoveryt.img) form Here

Stuck with worst version
Hello guys, I am here in Pakistan. Few months ago I tried to update my honor 4c to MM but as you know MM is not available for Pakistan officially.
Someone at xda gave me a version of Honor 4c Marshmallow which was build B502.
I installed and it had so many flaws, now I am unable to downgrade or even upgrade it to any other version.
My build number is CHM-U01C185B502
I need help to downgrade this to KitKat or upgrade it to MM B521 or latest.
I am so disappointed that even I want to throw this phone away or sell it anytime.
Please help me!

Its too long this post is made

But it is one of the best guide available when it was made.

Yes my frn it is best now too

Xiaomi Redmi 2 2014811 bricked after updating SuperSu binary in recovery?

I'm not rly good with electronics etc, my phone came with root access permissions via Security MIUI app so I installed SuperSu to manage it easier (MIUI app reqiured to manually check each app to allow access), no custom ROM or anything installed, the way it happened was
1. updated supersu from google play
2. entered supersu app,it asked me to update su binary
3. I clicked yes through recovery
4. it rebooted and got bootlooped.
It's stuck at the "mi.com" screen when turning on, can't go into recovery, fastboot mode only shows an image of Miui mascot without any fastboot options. I've followed some tutorials online and got the thing below from minimal adb.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

sufoc said:
I'm not rly good with electronics etc, my phone came with root access permissions via Security MIUI app so I installed SuperSu to manage it easier (MIUI app reqiured to manually check each app to allow access), no custom ROM or anything installed, the way it happened was
1. updated supersu from google play
2. entered supersu app,it asked me to update su binary
3. I clicked yes through recovery
4. it rebooted and got bootlooped.
It's stuck at the "mi.com" screen when turning on, can't go into recovery, fastboot mode only shows an image of Miui mascot without any fastboot options. I've followed some tutorials online and got the thing below from minimal adb.
Click to expand...
Click to collapse
Fastboot will show that android icon only.
No fastboot options will be available there.
Now you need to perform some steps to recover your device..
Note - Your data will be wiped. Also, remove memory card (if any).
Now let's start the process -:
Download MIUI Fastboot ROM file.
Here's the link..
1GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_global&b=F&r=global&n=
2GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_pro_global&b=F&r=global&n=
Also extract this file and put in C Drive.
Now turn your PC on..
And install latest Mi flash tool. http://api.bbs.miui.com/url/MiFlash
Turn your device off. By pulling battery. (Assuming that your device is in bootloop).
Go to fastboot mode (power + volume down)
Now turn your PC on.
Open Mi flash tool.
Connect your device.
Click on refresh button in flash tool.
Now, it will show some random numbers. (This is your device).
Now, select your ROM fastboot file which you downloaded and extracted.
After that, choose 'flash all' and click Flash..
It will take some time.
After that your device will be rebooted.
Voila! Your device is back to life!

edit: solved

edit: solved

sethidheeraj06 said:
Fastboot will show that android icon only.
No fastboot options will be available there.
Now you need to perform some steps to recover your device..
Note - Your data will be wiped. Also, remove memory card (if any).
Now let's start the process -:
Download MIUI Fastboot ROM file.
Here's the link..
1GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_global&b=F&r=global&n=
2GB RAM model - http://update.miui.com/updates/v1/fullromdownload.php?d=wt88047_pro_global&b=F&r=global&n=
Also extract this file and put in C Drive.
Now turn your PC on..
And install latest Mi flash tool. http://api.bbs.miui.com/url/MiFlash
Turn your device off. By pulling battery. (Assuming that your device is in bootloop).
Go to fastboot mode (power + volume down)
Now turn your PC on.
Open Mi flash tool.
Connect your device.
Click on refresh button in flash tool.
Now, it will show some random numbers. (This is your device).
Now, select your ROM fastboot file which you downloaded and extracted.
After that, choose 'flash all' and click Flash..
It will take some time.
After that your device will be rebooted.
Voila! Your device is back to life!
Click to expand...
Click to collapse
The fastboot rom is incorrect for my model (missmatching image and device error)

sufoc said:
The fastboot rom is incorrect for my model (missmatching image and device error)
Click to expand...
Click to collapse
Which device do you have..?
Kindly tell the model no. Such as 2014818.

sethidheeraj06 said:
Which device do you have..?
Kindly tell the model no. Such as 2014818.
Click to expand...
Click to collapse
It's the same as in the title, 2014811 TD-LTE

[RECOVERY][OFFICIAL][3.6.1-x] TWRP for Galaxy Note 20 & Note 20 Ultra Exynos

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official TWRP 3.6.1-* For Galaxy Note 20 & Note 20 Ultra​Only for exynos variants - N980F / N981B / N985F / N986B (Europe - Global, Single/Dual-SIM)
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this recovery before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Kernel Features:
N986BXXU3FVC5 kernel source (OneUI 4.1 / March 2022 sourcecode)
disabled uh/defex/proca/knox/rkp/rooting protection/logging/audit/useless features
Recovery Features:
Android 11 tree
built in full 64 mode
toybox/busybox support
compatible with Android 12.0 and above
Downloads:
Galaxy Note 20 (c1s / N980F / N981B)
Galaxy Note 20 Ultra (c2s / N985F / N986B)
AVB disabled vbmeta
* official TWRP builds are not up yet, you can find latest test builds in post #2, below
Instructions:
Odin (Windows)
Prerequisites: Samsung USB drivers, Odin v3.14.1
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .tar file according to your device
Download AVB disabled vbmeta .tar
Open Odin v3.14.1 and place the downloaded TWRP .tar file in AP tab, downloaded vbmeta .tar file in CP tab and click Start - once you press start grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Heimdall (Linux)
Install heimdall & additional required packages:
Code:
sudo apt-get update
sudo apt-get install heimdall-flash android-tools-fastboot android-tools-adb libusb-0.1-4 libusb-1.0-0 libusb-1.0-0-dev
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .img file according to your device
Download AVB disabled vbmeta .img
Open your preferred terminal in linux and type (replace red lines with the path of downloaded img files):
Code:
sudo heimdall flash --RECOVERY /path/to/recovery.img --VBMETA /path/to/vbmeta.img
and press enter - once you press enter grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
TWRP
Download .img file for your device and install from your current TWRP with Install image - browse to image location and select - Recovery
dd (Requires root)
Download .img file for your device, place it in the root of your /sdcard folder, rename it to twrp.img then run the following commands via adb shell or a terminal emulator app:
Code:
su
dd if=/sdcard/twrp.img of=/dev/block/platform/13100000.ufs/by-name/recovery
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Sources:
Device trees - c1s / c2s
Kernel - https://github.com/corsicanu/android_kernel_samsung_universal9830/tree/android-11.0
Recovery - https://github.com/omnirom/android_bootable_recovery
Credits:
TeamWin, geiti94, jesec, dyneteve, ianmacd, testers, donors and anyone else involved in making this possible
As always, if you like what i do, you can always send me some pizza/coffee/drugs/drinks or anything else via paypal.me/corsicanu

Compatibility and changelog:
06.05.2022 - Initial TWRP 3.6.1 release
Compatibility: Android 12 (OneUI 4.0 & 4.1)
Security patch: N/A
Misc links:
TeamWin official website
Telegram Support Group
Telegram Channel
Bootloaders / modems zips
Latest Magisk stable or canary
Further reading:
Full guide of how to unlock/root your device
Background on Android Verified Boot
Rollback protection

FAQ
Q: Can i use this recovery with other firmware then mentioned in compatibility?
A: Only with same Android version or Rollback protection might kick in and you won't be able to pass the lockscreen.
Q: Where do i get vbmeta.img?
A: From here, download the one you need according to install instructions.
Q: TWRP can't mount data partition, what to do?
A: Make sure you formatted data partition.
Q: Phone is not booting even after 20 minutes
A: Try to reboot. If still not booting, make sure you flashed multidisabler zip / formatted data partition.
Q: How to format data partition?
A:
Q: Phone is showing only Samsung logo
A: Try to reboot. If still not booting, consider installing an older TWRP build or a more recent firmware. If you still don't succeed, post here some details about your device and previous firmware and we might be able to help.
Q: Why do i need to format data partition?
A: Because old firmware encrypted your data partition and new rom can't decrypt and use that content / root needs access to data partition to place misc files / phone not booting after flashing root until data partition gets formatted.

Updated first post with official pages from twrp.me, but since the builds are not up yet, i posted latest test builds in post #2.
Regards

well done sir

Hello! I have a rooted sm-n980f exynos European version. I rooted my phone using magisk patched AP file through odin. I am trying to flash twrp 3.6.1 above and vbmeta.tar using odin but it fails. What shall I do? Thank you!

edsoedso said:
Hello! I have a rooted sm-n980f exynos European version. I rooted my phone using magisk patched AP file through odin. I am trying to flash twrp 3.6.1 above and vbmeta.tar using odin but it fails. What shall I do? Thank you!
Click to expand...
Click to collapse
Can you attach a screenshot of Odin and eventually tell me if you see anything in particular changing on phone screen? It should throw an error or something below the usual download mode lines. A pic of phone screen would be nice but i'd assume it's your only phone..
Regards

corsicanu said:
Can you attach a screenshot of Odin and eventually tell me if you see anything in particular changing on phone screen? It should throw an error or something below the usual download mode lines. A pic of phone screen would be nice but i'd assume it's your only phone..
Regards
Click to expand...
Click to collapse
Nothing changes in the screen phone. Attached is odin screen. Thank you!

edsoedso said:
Nothing changes in the screen phone. Attached is odin screen. Thank you!
Click to expand...
Click to collapse
Can you please check Kg state line from download mode? What's written there?

corsicanu said:
Can you please check Kg state line from download mode? What's written there?
Click to expand...
Click to collapse
I installed twrp but it seems that it does not read the internal storage.

corsicanu said:
Can you please check Kg state line from download mode? What's written there?
Click to expand...
Click to collapse
And how to flash the multidisabler? it seems that everything is encrypted and is impossible to locate it in twrp?

I found it!
1. enter into TWRP (after flashing twrp.tar and Vbmeta.tar via odin), format data and reboot again in TWRP
2. Being in TWRP, transfer from PC to your phone multidisabler.zip and magisk zip.
3. flash them both
4. reboot system
That is all!

i have note 20 5G N918B , i make every thing but my mobile keep restarting in to TWRP recovery , not going to system

Hello! What can be done to remove encryption from TWRP? I have flashed disabler but it still continues to encrypt. I tried formatting data from twrp, changing file system to EXT4 and back to EXT2 but with no result so far. any help?

m7mdo_93 said:
i have note 20 5G N918B , i make every thing but my mobile keep restarting in to TWRP recovery , not going to system
Click to expand...
Click to collapse
edsoedso said:
Hello! What can be done to remove encryption from TWRP? I have flashed disabler but it still continues to encrypt. I tried formatting data from twrp, changing file system to EXT4 and back to EXT2 but with no result so far. any help?
Click to expand...
Click to collapse
I'm still trying to find the issue, for whatever reason multidisabler needs a second flash to work as far as i seen on my device. So for now please flash multidisabler 2 times in a row, until i find a better solution to this.
Regards

corsicanu said:
I'm still trying to find the issue, for whatever reason multidisabler needs a second flash to work as far as i seen on my device. So for now please flash multidisabler 2 times in a row, until i find a better solution to this.
Regards
Click to expand...
Click to collapse
yeah , after flashing multidisabler second time my mobile able to working .. thanks for your help

corsicanu said:
I'm still trying to find the issue, for whatever reason multidisabler needs a second flash to work as far as i seen on my device. So for now please flash multidisabler 2 times in a row, until i find a better solution to this.
Regards
Click to expand...
Click to collapse
Thank You very much. It worked!

A big thank you, it works fine.

hey.
i did everything from this guide, and i got root access+twrp installed.
the problem that i am facing, is that i canot install anything from twrp, due to insufficient space.
the system size that twrp is reading is only 8384kb, so every installation of gapps is failed.
i tried to wipe ,format data, and changing the file system, but nothing helped.
please give me an idea how to solve it.
thanks.

Good day
Does this work for Android 13 One UI 5.1?

[RECOVERY][3.6.2_12][TOCO][UNOFFICIAL] Stable TWRP for Android 13 AOSP Roms

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch-driven user interface, with no more volume rocker or power buttons to mash. The GUI is also fully XML-driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:​
Touchscreen-driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout and true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Easy selection of internal/external storage
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe, and run a backup.
Source Code:​GitHub: https://github.com/TeamWin/android_bootable_recovery
Gerrit Instance: http://gerrit.twrp.me
Hello, this is TWRP, for Xiaomi Mi Note 10 Lite (toco)​
Touch and ADB work
Sideload
Fastbootd
MTP
USB OTG is working
Decryption is supported for A13 Roms
Send me a beer: PayPal​
Kernel source: https://bigota.d.miui.com/V13.0.2.0.SFNMIXM/miui_TOCOGlobal_V13.0.2.0.SFNMIXM_d23ee670ca_12.0.zip
Telegram group: https://t.me/ahq254chat
Download​https://bit.ly/twrp-A13-toco
Installation​Prerequisites: ADB & Fastboot platform-tools
1. Download the recovery from the link above
2. Boot your device into bootloader mode (Power + Volume Up)
3. Open a command window in the folder containing the downloaded recovery
4. Type the following command and hit Enter
fastboot flash recovery twrp-3.6.2_12-A13-toco.img
Click to expand...
Click to collapse
5. Type this command and hit Enter to boot into recovery
fastboot reboot recovery
Click to expand...
Click to collapse
6. Confirm successful installation when you boot into the new TWRP

Hello, thanks for the hard work on TWRP for this device.
I am experiencing a problem in order to copy files on my device from TWRP using the mount option, it seems that there is a problem because the files won't copy, even creating new folders won't work, did I do something wrong?

Idaho1911 said:
Hello, thanks for the hard work on TWRP for this device.
I am experiencing a problem in order to copy files on my device from TWRP using the mount option, it seems that there is a problem because the files won't copy, even creating new folders won't work, did I do something wrong?
Click to expand...
Click to collapse
I hope you have data decryption working. If not so, you did not do the correct steps. When installing the rom, make sure you format DATA using the recovery for the first-time installation

hey im trying to install the recovery using adb fastboot and every time i either try to boot into it ore flash it i see the twrp screen then it reboots into the os ,any advice on what i might be doing wrong?
Edit: i tried to boot into an older version of twrp to try to flash the new onw from there , it asked for a passsword so i went and just disabled my pin and tried to boot just too see what hapens into the a13 version and that time it actually botted up without crashing. So i think the problem was the model and now its working

Any plans to port TWRP 3.7.0 (Android 12.1 branch)?
This new version finally supports Android 12 decryption.

devnoname120 said:
Any plans to port TWRP 3.7.0 (Android 12.1 branch)?
This new version finally supports Android 12 decryption.
Click to expand...
Click to collapse
It is already available on my blog. Will be updated here later

Fox_it3 said:
hey im trying to install the recovery using adb fastboot and every time i either try to boot into it ore flash it i see the twrp screen then it reboots into the os ,any advice on what i might be doing wrong?
Edit: i tried to boot into an older version of twrp to try to flash the new onw from there , it asked for a passsword so i went and just disabled my pin and tried to boot just too see what hapens into the a13 version and that time it actually botted up without crashing. So i think the problem was the model and now its working
Click to expand...
Click to collapse
Glad you have it working

AndroidHQ254 said:
It is already available on my blog. Will be updated here later
Click to expand...
Click to collapse
Thanks! For future travelers, here is the TWRP update with working Android 12 filesystem decryption: https://androidhq254.blogspot.com/2022/06/twrp-recovery-for-minote10lite.html

devnoname120 said:
Thanks! For future travelers, here is the TWRP update with working Android 12 filesystem decryption: https://androidhq254.blogspot.com/2022/06/twrp-recovery-for-minote10lite.html
Click to expand...
Click to collapse
You found it. Great! The blog is more updated compared to xda

AndroidHQ254 said:
Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch-driven user interface, with no more volume rocker or power buttons to mash. The GUI is also fully XML-driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:​
Touchscreen-driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout and true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Easy selection of internal/external storage
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe, and run a backup.
Source Code:​GitHub: https://github.com/TeamWin/android_bootable_recovery
Gerrit Instance: http://gerrit.twrp.me
Hello, this is TWRP, for Xiaomi Mi Note 10 Lite (toco)​
Touch and ADB work
Sideload
Fastbootd
MTP
USB OTG is working
Decryption is supported for A13 Roms
Send me a beer: PayPal​
Kernel source: https://bigota.d.miui.com/V13.0.2.0.SFNMIXM/miui_TOCOGlobal_V13.0.2.0.SFNMIXM_d23ee670ca_12.0.zip
Telegram group: https://t.me/ahq254chat
Download​https://bit.ly/twrp-A13-toco
Installation​Prerequisites: ADB & Fastboot platform-tools
1. Download the recovery from the link above
2. Boot your device into bootloader mode (Power + Volume Up)
3. Open a command window in the folder containing the downloaded recovery
4. Type the following command and hit Enter
5. Type this command and hit Enter to boot into recovery
6. Confirm successful installation when you boot into the new TWRP
Click to expand...
Click to collapse
Thanks. Decryption working perfect.

Trying to follow the install procedure, but the fastboot part is never ending.
Note: the fastboot mode keys are Power + Volume Down.
Can you advice please?
Is there an alternative way to install TWRP on our device?
Regards,
Tyrell66

I am having an issue. I wiped Data, Cache and Dalvik, but when I try to copy files from my computer it says the device stopped responding or disconnected. Now I won't be able to use my phone.

AndroidHQ254​update this thread when you have time please!
Thank's for your hard work and dedication to give life on this mobile!