It's a pretty straightforward guide. Just follow the guide carefully and you'll be in no time rocking with B521.
This guide is divided into 5 sections. Follow all sections in the order illustrated in the guide.
Optional Step (Recommended) : Flash Stock B510
It is generally a good idea to start from a completely fresh base. Although not necessary, you will however, loose all your data and apps. Backup what is important before following.
Flash Stock Recovery (see Step 4 below)
Download B510 from here: https://mega.nz/#!NYgUFYLA!wEEf0f3w_6wxbzr9TYTvTquGBUhsMmRG53G8RSp2xMQ
Copy the Update.APP in the downloaded B510 ROM to dload folder in the root of your external SD card.
Power off your device.
Hold Volume Down, Volume Up and Power buttons simultaneously until you see the Honor logo. Your device will now automatically flash the whole Update.APP
Step 1 : Flashing Custom Recovery (TWRP in this case)
If you are already on TWRP, then skip this section.Before you follow make sure you have installed Huawei HiSuite and ADB/Fastboot Tools. If not see the links below:
Huawei HiSuite: http://consumer.huawei.com/minisite/HiSuite_en/
ADB and Fastboot: https://drive.google.com/open?id=0B0LG0AQ4V9FpcXRmV1BmRk1Ta1k
Extract the ADB and Fastboot zip to any preferred location.
Instructions
Download TWRP 3.0.1 Recovery. Head to this thread for download links: http://forum.xda-developers.com/honor-4c/development/recovery-twrp-3-0-0-0-huawei-honor-4c-t3349495 Copy the downloaded recovery to the folder where you have extracted ADB and Fastboot tools.
Power off your device.
Now while holding Volume Down button attach your device to computer via USB cable. Your device will now automatically switch to Fastboot mode.
In the folder where Recovery and Fastboot tools are present, hold down left shift button and simultaneously press Right mouse button. In the dropdown menu, select Open Command Window here.
Switch to the Command Prompt window and type:
Code:
fastboot flash recovery recovery_name.img
Replace recovery_name with the downloaded recovery's file name.
You have successfully installed TWRP :victory:
Step 2 : Enable Local OTA Update option in Marshmallow
In Marshmallow, Huawei has removed the option to flash OTA updates and Update.APP through the Local Update. Lets get that option back!Credits to this section goes to OXALIS at 4pda.ru for making the patch to enable Local Update option in Huawei Update app.
Download the Huawei Update patch from this link: https://drive.google.com/open?id=0B0LG0AQ4V9FpUXUybmFZeTVXNDg Copy it to either your device's internal memory or a SD card.
Power off your device.
Hold Power and Volume Up buttons simultaneously to boot your device to recovery.
Install the zip downloaded in the first step though TWRP.
Step 3 : Removing Root
If your device is currently not rooted and is completely stock, you can skip this section.
Before you follow make sure you have installed Huawei HiSuite and ADB/Fastboot Tools. If not see the links below:
Huawei HiSuite: http://consumer.huawei.com/minisite/HiSuite_en/
ADB and Fastboot: https://drive.google.com/open?id=0B0LG0AQ4V9FpcXRmV1BmRk1Ta1k
Extract the ADB and Fastboot zip to any preferred location.
Removing Root
Download Stock Marshmallow boot image from here: https://drive.google.com/open?id=0B0LG0AQ4V9FpY1lBVF9ubFdOSXM Copy it to the folder where you have extracted ADB and Fastboot.
Power off your device.
Now while holding Volume Down button attach your device to computer via USB cable. Your device will now automatically switch to Fastboot mode.
In the folder where Recovery and Fastboot tools are present; hold down left shift button and simultaneously press Right mouse button. In the dropdown menu, select Open Command Window here.
Switch to the Command Prompt window and type:
Code:
fastboot flash boot stock_boot_mm.img
Open SuperSU app and click on "Full Unroot" in Settings.
Your device is now unrooted.
Q. Why not just click the 'Unroot" option in SuperSU app?
Although that would work as it does the same the same thing described above i.e. replace patched ramdisk with stock backup, if the backup isn't present (such as you made a Factory Reset), your ramdisk will remain patched even though unrooted. It's good idea to revert to Stock boot.img if you ever need to root again.
Step 4 : Flashing Stock Recovery
It has been literally mentioned a thousand times that you can't flash official ROMs and OTAs through a custom recovery (such as TWRP). You have to be on Stock Recovery.
Before you follow make sure you have installed Huawei HiSuite and ADB/Fastboot Tools. If not see the links below:
Huawei HiSuite: http://consumer.huawei.com/minisite/HiSuite_en/
ADB and Fastboot: https://drive.google.com/open?id=0B0LG0AQ4V9FpcXRmV1BmRk1Ta1k
Extract the ADB and Fastboot zip to any preferred location.
Instructions
Download the Marshmallow Stock EMUI Recovery from here: https://drive.google.com/open?id=0B0LG0AQ4V9FpbldwYWExOGNTUTQ Copy the recovery to the location where you have extracted ADB and Fastboot tools.
Power off your device.
Now while holding Volume Down button attach your device to computer via USB cable. Your device will now automatically switch to Fastboot mode.
In the folder where Recovery and Fastboot tools are present; hold down left shift button and simultaneously press Right mouse button. In the dropdown menu, select Open Command Window here.
Switch to the Command Prompt window and type:
Code:
fastboot flash recovery stock_recovery_mm.img
You have successfully installed Stock Recovery :victory:
Step 5 : Updating to B521
Download the B521 OTA zip from here: https://drive.google.com/file/d/0BxgU9yQssu83NTJ6eFBseS1ET3c/view?pref=2&pli=1 (Credits goes to vit755 at 4pda.ru)
Rename the downloaded zip to update.zip and copy it to dload folder in the root of your external SD card.
In your device, open Settings and tap on Update.
Tap the Menu button and then Local Update
Tap the Incremental Update option.
Your device will now reboot to install the update.
Tada! You're done! (Hit thanks if you found this guide useful)
It worked. Now on B521.
Thanks bro
Can anyone provide the changelog for this? is it worth installing over b510?
Help pls.. After installing the update using Huawei updater, the installation got stuck at around 92% so I had to reboot my phone, but now it's stuck in boot loop... I tried flashing the stock Marshmallow rom but I keep on getting install error on forced SD upgrade... My phone version is balong right now..
Edit: I flashed the stock Malaysian Lollipop using forced upgrade and my phone is working again
SU and TWRP after upgrade
Can i revert to SU and TWRP after upgrade to b521?
Boot problem
After install stock_boot_mm.img the phone doesn´t boot. Someone with same problem? I can restore the system with TWRP but i can´t install B521.
Help please.
You need stock boot and stock recovery.
Try this
rauloraulon said:
After install stock_boot_mm.img the phone doesn´t boot. Someone with same problem? I can restore the system with TWRP but i can´t install B521.
Help please.
Click to expand...
Click to collapse
Are you sure you're on B510. The boot image has been extracted from B510 Update.APP so it should work on all CHM-U01.
I'm on BalongC52B311, CHC—U01, Android 6.0. I suposed equal to B510. Isn´t it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rauloraulon said:
I'm on BalongC52B311, CHC—U01, Android 6.0. I suposed equal to B510. Isn´t it?
View attachment 3750465
Click to expand...
Click to collapse
The CHC-U01 will not work. You have to manually upgrade to B510 first.
The most easiest method is to downgrade to C636B330 and upgrade to B510.
Finally, B521
rauloraulon said:
I'm on BalongC52B311, CHC—U01, Android 6.0. I suposed equal to B510. Isn´t it?
View attachment 3750465
Click to expand...
Click to collapse
I get it. B521 installed and running.
I must to do a clean installation of B510, patch with TWRP for activate local updates, install the stock recovery and update to B521. :victory:
My phone didn´t enter in fastboot mode, so i enter with " adb reboot-bootloader".
TWRP 3.0 didn´t work for me. I used TWRP 2.8..7.0 hw4c (recoveryt.img) form Here
Stuck with worst version
Hello guys, I am here in Pakistan. Few months ago I tried to update my honor 4c to MM but as you know MM is not available for Pakistan officially.
Someone at xda gave me a version of Honor 4c Marshmallow which was build B502.
I installed and it had so many flaws, now I am unable to downgrade or even upgrade it to any other version.
My build number is CHM-U01C185B502
I need help to downgrade this to KitKat or upgrade it to MM B521 or latest.
I am so disappointed that even I want to throw this phone away or sell it anytime.
Please help me!
Its too long this post is made
But it is one of the best guide available when it was made.
Yes my frn it is best now too
Related
:fingers-crossed:How to get root Moto G 2015 With Stock Android Marshmallow 6.0 (XT1541)
Hi guys. Now I have a Moto G 2015 XT1541 with previously unlocked bootloader (following Motorola Guide described here, be careful unlocking bootloader wipes everything!) with recently installed Europe Retail Stock ROM MM 6.0, but i was having some issues trying to install TWRP 3.0 and SuperSU 2.65....until now.
With latest SuperSU you will get bootloop, and probably you need to reinstall the stock rom completely.........but... ....This method works fine!
Try it yourself on XT1540, XT1542, XT1543, XT1544 and XT14548 variants
So, I have used TWRP twrp-osprey-2.8.7-r7.img for the recovery and Super SU Beta 2.62 (BETA-SuperSU-v2.62-3-20151211162651.zip) to get root on my device.
Get TWRP recovery and ROOT
Step 0: enter to developer options (tap 7 times the build number) and select Allowing USB debubbing and Allow OEM unlock options
Step 1: install TWRP 2.8.7-r7 entering to bootloader mode
Turn off the device, press power and volume down and wait for two seconds. device will show bootloader mode in black screen, connect it to the pc through usb cable
Step 2: Paste twrp2.8.7-r7.img file into folder \Android\sdk\platform-tools and rename it to recovery.img (this requires previously installed Android SDK Tools, but you can do the same with MinimalADB
open cmd in windows, navigate to the platform-tools folder location and write this line:
Code:
fastboot boot recovery.img
Wait until ok message appears in cmd
TWRP will appear, and press reboot System. Enter bootloader mode again and type in CMD the following:
Code:
fastboot flash recovery recovery.img
Wait until ok message appears in cmd. After that, press in bootloader mode the recovery option, you will enter to twrp and now new recovery becomes permanent, press Reboot system.
Step 3: copy BETA-SuperSU-v2.62-3-20151211162651.zip file into the device and after that, disconnect it from usb
Step 4: turn off the device, enter bootloader mode as stated in step 1, and select the recovery option with the volume up and down , press power button to enter to recovery and twrp will appear instead of original recovery.
Step 5: in twrp press install, select location of the Beta SuperSu File, select beta Super SU zip file and allow installation swipping to the right side and wait until it finish.
Step 5.1: after flash Super SU, wipe dalvik and cache through twrp, pressing the wipe dalvik/cache button located in left side.
Step 6: in twrp press button reboot now.
Wait a little while android rebuild the cache.
The device will enter to the home screen. check that super su app is installed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: if twrp offers to you install SuperSu dont let it. That causes a bug.
Step 7: Install Root checker and check if you are root.
Thats all folks!!
-------------------------------------------------------------------------------------------
Plus 1 - If something goes wrong you can reinstall Stock as described in this repair guides. Check here the firmware and here the reinstall instructions
Plus 2 - How to delete the Motorola annoying unlock bootloader message:
Step 0: connect the device to the pc, copy unlocked_logo.zip file into the device and after that, disconnect from usb
Step 1:
Turn off the device, press power and volume down and wait for two seconds. device will show bootloader mode in black screen
Step 2: In bootloader mode select with the volume up and down the recovery option, press power button to enter and twrp will appear
Step 3: in twrp press install, select location of the unlocked_logo.zip File, select that file and allow installation swipping to the right
Step 4: in twrp press reboot now. The device will boot without nagging window.
Excellent instructions. First time I saw detail to flash TWRP in a manner that does not revert back to stock recovery.
One recommendation, after the first boot to recovery, make a clean (pre-root, pre-cutom recovery) TWRP back up to your SD Card. If anything goes wrong, just flash this backup.
MrTooPhone said:
Excellent instructions. First time I saw detail to flash TWRP in a manner that does not revert back to stock recovery.
One recommendation, after the first boot to recovery, make a clean (pre-root, pre-cutom recovery) TWRP back up to your SD Card. If anything goes wrong, just flash this backup.
Click to expand...
Click to collapse
Thank you so much! you appreciate my work after several soft bricks and some bootloops something good result! :silly:
MrTooPhone said:
One recommendation, after the first boot to recovery, make a clean (pre-root, pre-cutom recovery) TWRP back up to your SD Card. If anything goes wrong, just flash this backup.
Click to expand...
Click to collapse
Man I wish read your advice last night before I used one of those automated programs to root (installed latest super su) and bootloop city. I figured I would make a backup right after rooting.
I recovered by installing a close to stock 5.11 rom with twrp but would like to get back to MM without starting from scratch.
Does anyone know of a Stock MM rom (not ASOP) that can be installed with twrp?
If you get that The phone is not allowed to unlocked The bootloader when i try, how can i unlocked it then
Skickat från min MotoG3 via Tapatalk
Hi can i use same method to root my moto g xt1550 6.0 2Gb version?
Pls reply.
And i there CWM recovery available instead of TWRP Recovery...
I like CWM.
moto g 3rd gen
did everything in tor says no such file or dorectory software status says modified does that have anything to do with it? I'm lost
Amirphp said:
Hi can i use same method to root my moto g xt1550 6.0 2Gb version?
Pls reply.
And i there CWM recovery available instead of TWRP Recovery...
I like CWM.
Click to expand...
Click to collapse
I have same question
Amirphp said:
Hi can i use same method to root my moto g xt1550 6.0 2Gb version?
Pls reply.
And i there CWM recovery available instead of TWRP Recovery...
I like CWM.
Click to expand...
Click to collapse
AniketDhoke said:
I have same question
Click to expand...
Click to collapse
yes you can use this method for xt1550
there is no CWM recovery for Osprey
how much time will it take to rebuild the cache..?? please tell me...after the process 40 mins has passed and still now my moto g3 has not turned on...it still on the boot screen .......
hkr008 said:
how much time will it take to rebuild the cache..?? please tell me...after the process 40 mins has passed and still now my moto g3 has not turned on...it still on the boot screen .......
Click to expand...
Click to collapse
I've had it do that on a new flash and I just held the power down until it shut off and when I turned it back on it boots normally.
Thanks, did not understand why the latest version not started, I see that you can not install a more current than version 2.65.
Enviado desde mi MotoG3 mediante Tapatalk
veloz46 said:
Thanks, did not understand why the latest version not started, I see that you can not install a more current than version 2.65.
Enviado desde mi MotoG3 mediante Tapatalk
Click to expand...
Click to collapse
Yes the tutorial is very clear versión 2.62-3 is the only one that works
Sent from my MotoG3 using Tapatalk
One tap root
Is any one tap root system available for moto g version 3 (2015) xt1550 running android 6.0 with build number mpi24.65-25 . need it desperately !
in STEP 2, if i use adb minimal i've not this folder \Android\sdk\platform-tools, where i put recovery.img? on minimal folder?
MrTooPhone said:
Excellent instructions. First time I saw detail to flash TWRP in a manner that does not revert back to stock recovery.
One recommendation, after the first boot to recovery, make a clean (pre-root, pre-cutom recovery) TWRP back up to your SD Card. If anything goes wrong, just flash this backup.
Click to expand...
Click to collapse
how i can do that?
thanks
sethgreen said:
" after the first boot to recovery, make a clean (pre-root, pre-cutom recovery)"
how i can do that?
Click to expand...
Click to collapse
Make sure you have a portable SD Card installed. Then simply boot TWRP, set back up location to SD Card, and make back up. If you never used TWRP, you may want to Google it and learn a little before your first attempt.
roouted my device, everything ok
Just to report, it worked on my XT1543 (dual sim, 1GB)
Enviado de meu MotoG3 usando Tapatalk
Couldn't get this to work on XT1541 with 24.44.1.osprey_reteu_reteu.en.EU reteu with the instructions mentioned in the first post.
I got things to work by using the latest SuperSU and forced it to install in system-less mode. This worked quite well.
1. First go to bootloader using power+volumedown or from PC:
Code:
adb reboot bootloader
2. Then boot TWRP (3.0.0-r2 in my case worked fine):
Code:
fastboot boot twrp-osprey-3.0.0-r2.img
3. Now copy SuperSU to the phone:
Code:
adb push BETA-SuperSU-v2.68-20160228150503.zip /sdcard/
4. Next make sure SuperSU will install in system-less mode:
Code:
adb shell
echo SYSTEMLESS=true > /data/.supersu
5. Install SuperSU by pressing "Install" in TWRP, select BETA-SuperSU-v2.68-20160228150503.zip and swipe. After installing you should see in the log that it used system-less mode. Now you can "Clear Cache/Dalvik" as well.
6. Now reboot. It should show the "Warning Bootloader Unlocked" screen once, then reboot, then show it again and this time it should continue booting into Android.
Hi guys, for me I had NO problem flashing "BETA-SuperSU-v2.62-3-20151211162651.zip" using "twrp-osprey-3.0.0-r2.img" on MPI24.65-33.1 Build number XT1541 (+ Allow OEM unlock options)
Hi all,
I just recently upgraded my US Version of the M3 32Gb to the new factory nougat EMUI 5.0 version. This was the OTA from huawei since hadn't rooted my tablet. I now want to get the 5Ghz WiFi band to turn on, and from what I get, you have to root the device and update a couple of files. Can someone guide me to the steps of how to perform the root. I got the steps to unlock my bootloader. I am just not sure what the steps are to root.
Thanks in advance!
If you have to ask you probably shouldn't be messing with root...
https://forum.xda-developers.com/p9/development/tool-srk-tool-huawei-bootloader-root-t3374068
pritesh0381 said:
Hi all,
I just recently upgraded my US Version of the M3 32Gb to the new factory nougat EMUI 5.0 version. This was the OTA from huawei since hadn't rooted my tablet. I now want to get the 5Ghz WiFi band to turn on, and from what I get, you have to root the device and update a couple of files. Can someone guide me to the steps of how to perform the root. I got the steps to unlock my bootloader. I am just not sure what the steps are to root.
Thanks in advance!
Click to expand...
Click to collapse
Take it from someone who has been rooting phone by Samsung,Motorola,Htc, among others for years,it IS possible to brick this tablet into an unrecoverable state.
I speak from experience lol.
Sent from my HTC6545LVW using XDA-Developers Legacy app
pritesh0381 said:
Hi all,
I just recently upgraded my US Version of the M3 32Gb to the new factory nougat EMUI 5.0 version. This was the OTA from huawei since hadn't rooted my tablet. I now want to get the 5Ghz WiFi band to turn on, and from what I get, you have to root the device and update a couple of files. Can someone guide me to the steps of how to perform the root. I got the steps to unlock my bootloader. I am just not sure what the steps are to root.
Thanks in advance!
Click to expand...
Click to collapse
Compared to unlocking the bootloader and upgrading EMUI 5 it's much easier. I did it and it works.
You will need to have TWRP installed and then flash SuperSU-v2.79-EMUI5.0.zip
Google How to Root Huawei MediaPad M3 EMUI5 Android 7
1. create a new folder and extract the adb file and twrp & supersu in that folder
ADB :
https://www.androidfilehost.com/?fid=529152257862726185
SuperSU-v2.82-EMUI5 (dont extract the zip file)
https://www.androidfilehost.com/?fid=673368273298961353
TWRP (greatslon mod) (download the right version for your device!!!!)
https://androidfilehost.com/?w=files&flid=125388
--------------------------------------------
now run this commands:
adb reboot bootloader (need to enable usb debugging)
fastboot flash recovery twrp.img
fastboot reboot (wait till your device booted )
adb reboot recovery (need to enable usb debugging)
adb sideload su.zip (rename SuperSU-v2.82-EMUI5 to su so you dont need to type that much)
https://www.youtube.com/watch?v=CivvxcM1PCY
from TWRP reboot system
Thank you guys, I will keep you posted.
lukanz said:
1. create a new folder and extract the adb file and twrp & supersu in that folder
ADB :
https://www.androidfilehost.com/?fid=529152257862726185
SuperSU-v2.82-EMUI5 (dont extract the zip file)
https://www.androidfilehost.com/?fid=673368273298961353
TWRP (greatslon mod) (download the right version for your device!!!!)
https://androidfilehost.com/?w=files&flid=125388
--------------------------------------------
now run this commands:
adb reboot bootloader (need to enable usb debugging)
fastboot flash recovery twrp.img
fastboot reboot (wait till your device booted )
adb reboot recovery (need to enable usb debugging)
adb sideload su.zip (rename SuperSU-v2.82-EMUI5 to su so you dont need to type that much)
https://www.youtube.com/watch?v=CivvxcM1PCY
from TWRP reboot system
Click to expand...
Click to collapse
Thanks for the help. Looking through your steps, they are straight forward. I just have one question about twrp. My assumption is I need to use twrp_BTV-W09_5_greatslon.img since I am on nougat, is that correct? I tried searching the forums, I think I found one post that stated the _5 is for nougat, but just wanted to confirm.
Thanks!
BTV-W09 (WiFi) => twrp.zip
BTV-DL09 (LTE) => twrp_us.zip
check your version info in settings......mine is the BTV-W09 (wifi version) so i flashed the twrp.zip
ps: you can check this threat for more info too
https://forum.xda-developers.com/me...ootinsecurem3fix-adbdm-verity-v2-img-t3636210
lukanz said:
BTV-W09 (WiFi) => twrp.zip
BTV-DL09 (LTE) => twrp_us.zip
check your version info in settings......mine is the BTV-W09 (wifi version) so i flashed the twrp.zip
ps: you can check this threat for more info too
https://forum.xda-developers.com/me...ootinsecurem3fix-adbdm-verity-v2-img-t3636210
Click to expand...
Click to collapse
Thanks, I understand that the BTV-DL09 is for LTE and the BTV-W09 is for wifi. However, on Twrp's page, there are two versions of the BTV-W09 image, one is the twrp_BTV-W09_5_greatslon.img and the other is twrp_BTV-W09_greatslon.img. I was trying to understand the difference.
lukanz said:
1. create a new folder and extract the adb file and twrp & supersu in that folder
ADB :
https://www.androidfilehost.com/?fid=529152257862726185
...........
adb sideload su.zip (rename SuperSU-v2.82-EMUI5 to su so you dont need to type that much)
https://www.youtube.com/watch?v=CivvxcM1PCY
Click to expand...
Click to collapse
I had lost root when I used the firmware updater to go to nougat and couldn't get back into twrp to flash magisk again no matter what I did. This worked and I was also able to get the first successful full nandroid backup I've ever had with this device afterwards. Thanks.
BTW - you don't need to rename anything, just type the first two letters of the file and hit tab for autocomplete.
thecdn said:
I had lost root when I used the firmware updater to go to nougat and couldn't get back into twrp to flash magisk again no matter what I did. This worked and I was also able to get the first successful full nandroid backup I've ever had with this device afterwards. Thanks.
BTW - you don't need to rename anything, just type the first two letters of the file and hit tab for autocomplete.
Click to expand...
Click to collapse
Awesome, that is great news. Quick question, which version of the TWRP did you end up using, the twrp_BTV-W09_5_greatslon.img or twrp_BTV-W09_greatslon.img.?
pritesh0381 said:
Awesome, that is great news. Quick question, which version of the TWRP did you end up using, the twrp_BTV-W09_5_greatslon.img or twrp_BTV-W09_greatslon.img.?
Click to expand...
Click to collapse
The _5 version as that was the latest.
Is anyone else having trouble getting the boot loader unlock code from the web site? I just bought a new wi-fi (no IMEI) BTV-W09 and I validated the serial and product id like 10 times, but I'm getting "Please make sure the verification code and model number are correct. If your device has multiple IMEIs or MEIDs, please try another IMEI or MEID." on the website. I emailed customer support and they told me that they could not give me the unlock code...
I just want to unlock my 5g Wi-Fi...
thecdn said:
I had lost root when I used the firmware updater to go to nougat and couldn't get back into twrp to flash magisk again no matter what I did. This worked and I was also able to get the first successful full nandroid backup I've ever had with this device afterwards. Thanks.
BTW - you don't need to rename anything, just type the first two letters of the file and hit tab for autocomplete.
Click to expand...
Click to collapse
I just downloaded the twrp.zip from androidhost file...not sure wich version from the thread is the right one....
lukanz said:
1. create a new folder and extract the adb file and twrp & supersu in that folder
ADB :
https://www.androidfilehost.com/?fid=529152257862726185
SuperSU-v2.82-EMUI5 (dont extract the zip file)
https://www.androidfilehost.com/?fid=673368273298961353
TWRP (greatslon mod) (download the right version for your device!!!!)
https://androidfilehost.com/?w=files&flid=125388
--------------------------------------------
now run this commands:
adb reboot bootloader (need to enable usb debugging)
fastboot flash recovery twrp.img
fastboot reboot (wait till your device booted )
adb reboot recovery (need to enable usb debugging)
adb sideload su.zip (rename SuperSU-v2.82-EMUI5 to su so you dont need to type that much)
https://www.youtube.com/watch?v=CivvxcM1PCY
from TWRP reboot system
Click to expand...
Click to collapse
I have finished all above, my tablet is BTV-DL09 with emui5.0 in android 7.0 B350 rom, however, SuperSU can't be found after reboot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I open the app requires root, it shows "Asking for root rights".
Should I flash the superSU once again? flash the zip in the recovery?
Thanks for the solution in advice.
lukanz said:
1. create a new folder and extract the adb file and twrp & supersu in that folder
ADB :
https://www.androidfilehost.com/?fid=529152257862726185
SuperSU-v2.82-EMUI5 (dont extract the zip file)
https://www.androidfilehost.com/?fid=673368273298961353
TWRP (greatslon mod) (download the right version for your device!!!!)
https:
//androidfilehost.com/?w=files&flid=125388
Dear friend you say above
--------------------------------------------
now run this commands:
adb reboot bootloader (need to enable usb debugging)
fastboot flash recovery twrp.img
fastboot reboot (wait till your device booted )
adb reboot recovery (need to enable usb debugging)
adb sideload su.zip (rename SuperSU-v2.82-EMUI5 to su so you dont need to type that much)
https://www.youtube.com/watch?v=CivvxcM1PCY
Dear friend,you say this <<create a new folder and extract the adb file and twrp & supersu in that folder>>
In a few lines below you say: << SuperSU-v2.82-EMUI5 (dont extract the zip file)>> So what is the right action,to extract or not the SuperSu...in the folder that we created before?
Thanks in advance
Click to expand...
Click to collapse
Warning
Before Proceeding backup your data
TRY at OWN risk I'm NOT Responsibe if you BRICK YOUR DEVICE
Update- This method is tested & working with latest ota update NMB26.54-74
[/CENTER][/B][/SIZE][/COLOR]
IF ANYTHING GOES WRONG Download & Flash Stock ROM
Stock ROM link
SPFlashTool link
Updated Stock ROM 54-74 GDrive - here
New Oreo 27.43-20 Link
Old version Stock ROM Google Drive Link Stock Rom
nvram backup file by @peacelover94 - here
Solution For
>Tool img DL fail
Just check/tick these option in spflashtool settings & Flash stock rom again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Video Guide For Stock Rom Flashing - Youtube
How to Flash Stock Rom via Fastboot Method -
1. Open CMD by Shift + Right Click in Folder where your stock firmware .img files are.
2. Reboot to Fastboot Mode by using cmd command
adb fastboot rebootOr
Switch off then Press & Hold Vol Up + Power button for while once menu appeared Select fastboot by using Vol Up key & confirm by pressing Vol Down Key
3. In fastboot type following command in CMD Window
For checking devices is connected in fastboot enter
fastboot devicesIf Connected then proceed following commands
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash system system.img flashing system takes 10+ mins
fastboot flash data userdata.img
fastboot reboot
Download & Install ADB from here
First Unlock your bootloader
1. First of all, enable the Developer Option
To Enable the Developer Option, Go to your Settings -> About -> Software Information -> More -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled"
2. Go back to settings -> Now you need to enable the OEM Unlock by going to Settings -> Developer Option and Enable OEM Unlock and USB Debugging
3. Now connect your phone to Computer using USB Cable.
4. When you connect your Phone to Computer, please wait until all the drivers get installed.
5. Open a command prompt window by pressing Shift Key + Right Mouse Click.
6. Now type the command below to reboot your phone to bootloader
adb reboot bootloader7. If you see a pop up to allow USB Debugging on your phone, Click OK.
8. proceed to unlock the bootloader with the following command:
Remember that this step will wipe EVERYTHING off the phone
fastboot oem unlockSay Yes to unlock bootloader and then it will some time format your data
9. Reboot Your Device , You will see Orange Status bla bla bla Don't panic Its normal thing now setup your device but do not restore backup yet
Flashing TWRP and ROOT
Updated Black Screen Fix TWRP - Download
Old Download TWRP
Download latest Magisk zip from here
Or
SuperSu zip from here
Flahed & Tested SuperSU v2.82 works fine but SafetyNet Fails
Sock Recovery if needed Link
1. Connect your device to PC
2. Open CMD by Shift+Right click open cmd where your TWRP_3.1.1.0.img is downloaded.
3. Reboot to Bootloader by
adb reboot bootloader4. Now enter following command in fastboot
fastboot flash recovery TWRP_3.1.1.0.img5. DO NOT USE fastboot reboot
Use "vol up + down + power button" to manually switch off you k8 note, otherwise twrp will restore to stock if you use fastboot reboot command.
6. After Switch Off Press & hold vol up + power button then select recovery by vol up & press vol down key to enter in recovery.
7. Now Wait for 30 Sec/ till phone vibrates, Then press power button + vol up simultaneously until you see twrp lock screen.
8. Just Cancel if It asks for Enter password to decrypt and Allow modification by swipe.
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
10. GoTo install browse and select Magisk.zip or SuperSU.zip & flash.(optional if needed install Busybox for Android NDK by osm0sis magisk module for busybox)
11. Reboot Enjoy.
Known bug in TWRP-
Battery always shows 50% in TWRP
Video Guide https://youtu.be/HrbppEWlOhs
Join Lenovo K8 Note Development Group on Telegram for direct Conversation Link
WhatsApp Group Link
Enable Wireless Display/MiraCast Magisk Module - Video
Thanks to:
@andy_zhang - for stock rom post link
and me @ysalunke007 for TWRP
NEXT CUSTOM ROM
Big Thanks for the Tutorial. If anything happens wrong while rooting like boot loop or something worse, is there stock rom or firmware to flash or push through adb ?
Yes
peacelover94 said:
Big Thanks for the Tutorial. If anything happens wrong while rooting like boot loop or something worse, is there stock rom or firmware to flash or push through adb ?
Click to expand...
Click to collapse
yes, there is stock ROM
link also provided in this post end.
btw here's direct link Stock ROM
FlashTool link
ysalunke007 said:
yes, there is stock ROM
link also provided in this post end.
btw here's direct link Stock ROM
FlashTool link
Click to expand...
Click to collapse
Thank you very much. The flash tool link does not seems to work. Hope its SP flash tool you are talking about.
flash via adb fastboot methoad i have succesfully flash adb method
peacelover94 said:
Big Thanks for the Tutorial. If anything happens wrong while rooting like boot loop or something worse, is there stock rom or firmware to flash or push through adb ?
Click to expand...
Click to collapse
Nice Job
Finally rooting tutorial for Lenovo K8 Note has become available.
Does SuperSu work fine?
Anas Rahman said:
Does SuperSu work fine?
Click to expand...
Click to collapse
Not tested by me but some user says in original rom post that he flashed superSU from old twrp also works fine.
peacelover94 said:
Thank you very much. The flash tool link does not seems to work. Hope its SP flash tool you are talking about.
Click to expand...
Click to collapse
Yes it's SP flash tool but you can use adb fastboot also
ysalunke007 said:
Not tested by me but some user says in original rom post that he flashed superSU from old twrp also works fine.
Click to expand...
Click to collapse
I'll confirm it tomorrow
ysalunke007 said:
Yes it's SP flash tool but you can use adb fastboot also
Click to expand...
Click to collapse
Please tell me how to flash firmware.Im new to this device firmware flashing
lenrussel said:
Please tell me how to flash firmware.Im new to this device firmware flashing
Click to expand...
Click to collapse
It's easy bro check this guide
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Fastboot Guide
http://www.stupdroid.com/2016/08/flash-stock-rom-via-fastboot-on-android.html?m=1
Does the rom link given here unzips perfectly?
Because i saw in another thread of Lenovo K8note titled firmware, users unable to unzip due to error in system img. Also downloading from baidu needs a user id. If its possible could you or anyone else reading this upload it in some other online storage drive. Im little bit worried about getting a worse situation while rooting. Even if it goes wrong i can use the stock firmware to make it back.
peacelover94 said:
Does the rom link given here unzips perfectly?
Because i saw in another thread of Lenovo K8note titled firmware, users unable to unzip due to error in system img. Also downloading from baidu needs a user id. If its possible could you or anyone else reading this upload it in some other online storage drive. Im little bit worried about getting a worse situation while rooting. Even if it goes wrong i can use the stock firmware to make it back.
Click to expand...
Click to collapse
There is mega download link available too
https://forum.xda-developers.com/an...8note-original-firmware-t3679499/post73946000
lenrussel said:
There is mega download link available too
https://forum.xda-developers.com/an...8note-original-firmware-t3679499/post73946000
Click to expand...
Click to collapse
Thanks for the reply. Anyhow got a work around for downloading from baidu using chrome extension, without account. Just wanted to confirm whether the firmware zip is working fine. If some one used it and been successful, please do tell me.
ysalunke007 said:
It's easy bro check this guide
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Fastboot Guide
http://www.stupdroid.com/2016/08/flash-stock-rom-via-fastboot-on-android.html?m=1
Click to expand...
Click to collapse
Do i have to unlock bootloader again after flashing the firmware in order to root the device?
lenrussel said:
Do i have to unlock bootloader again after flashing the firmware in order to root the device?
Click to expand...
Click to collapse
Yes, I think so. Anyhow there is no need to unlock oem again if you are flashing the rom via TWRP. Anyhow let someone confirm about it.
peacelover94 said:
Yes, I think so. Anyhow there is no need to unlock oem again if you are flashing the rom via TWRP. Anyhow let someone confirm about it.
Click to expand...
Click to collapse
There is a error while extracting zip file of the firmware .just checked, I downloaded it from mega.i want to confirm if its the same for baidu also
lenrussel said:
Do i have to unlock bootloader again after flashing the firmware in order to root the device?
Click to expand...
Click to collapse
No need to unlock bootloader again if you use fastboot method to flash stock firmware , & for spflashtool I'm not sure but I think it remains unlocked
lenrussel said:
There is a error while extracting zip file of the firmware .just checked, I downloaded it from mega.i want to confirm if its the same for baidu also
Click to expand...
Click to collapse
No error while extracting firmware downloaded from baidu
Before doing this, carefully read the material and read the instructions. If you do everything point by point, then you will succeed.
1. Setup
Donwload the following utilities:
Partitions Flashing Tool - Universal partition tools for qualcomm snapdragon 435
http://4pda.ru/forum/index.php?s=&showtopic=952274&view=findpost&p=85383238
Custom Recovever - TWRP-3.3.1.0-V9Vita.img
https://drive.google.com/file/d/1diPzJ_qcZRvzVFPRdE139ggCk9vgzG72/view?usp=sharing
Disable encryption - Disable_Dm-Verity_ForceEncrypt_08.02.2019[1].zip (attached in theme)
2. Install
When you download all utillites, unpack Partition Flasting Tool in any folder and open batch file - PFT_V1.5_EN.bat, connect you're smartphone to PC, and press in utillites number 2 (ADB to Reboot EDL mode changer). You're phone go to EDL mode 9008. Tape number 4 (Backup One Partition), Enter COM Port, Enter target partition name: recovery. Next step is flash custom recovery - twrp.
Put file - TWRP-3.3.1.0-V9Vita.img in files folder, rename him in twrp.img. When is done, press number 5 (Flash one partition),
Enter COM Port:
Enter Target partition name: - recovery
Enter Flashing file name: - twrp (or your recovery file name)
After the installation of the process, turn on phone in recovery mode (VolumeUP+Power). In TWRP use swipe and go to Wipe, press right button Format Data, tape YES and OK. Done?! Go to EDL mode, use number 2 (ADB to Reboot EDL mode changer) in utillites PFT 1.5. Now need flash stock recovery (that you're backup). Use number 5 (Flash one partition),
Enter COM Port:
Enter Target partition name: - recovery
Enter Flashing file name: - recovery (or your recovery file name)
How it complete, turn on phone in recovery mode, now we are in stock recovery, press wipe data \ factory reset. Next go to EDL, use number 2 (ADB to Reboot EDL mode changer). Flash TWRP again as we as we did before. In EDL mode use press number 5 (Flash one partition):
Enter COM Port:
Enter Target partition name: - recovery
Enter Flashing file name: - twrp (or your recovery file name)
At the end of the installation, turn on phone in recovery mode (VolumeUp+Power), put zip file Disable_Dm-Verity_ForceEncrypt_08.02.2019[1].zip in any folder, flash him (this disable encryption (Otherwise you get an error - encryption failed)). When zip flash is done, reboot phone as system, now you have Working TWRP and correct Stock\Custom Roms install without error.
3. Install Custom Roms
Download any TREBLE Rom, example LineageOS 16.0:
https://forum.xda-developers.com/project-treble/trebleenabled-device-development/gsi-lineageos-16-0-gsi-arm64-ab-how-to-t3908029
Copy to phone and flash as img in system image, reboot to system, and wait for the installation process to complete. Use for your own purposes.
4. Install Custom Roms
Go to https://opengapps.org, Download any pack (pico), copy on the phone folder, reboot to recovery mode, go to Wipe, press left button - advanced wipe, tap on system (set checkbox on system), Tap on Repair or Change File System, next Change File System. Now you will not have error 70.
For root use magisk 16.0 or 16.7
Source link http://4pda.ru/forum/index.php?s=&showtopic=952274&view=findpost&p=88816929
Download Files
Hi! Thanks for sharing the information. I was trying to get the "PFT_V1.5.zip" file but on the site appears to be unavailable. Do you have it available? Thanks again for sharing!
It's been like 5 years since the last time I rooted an Android device, so I'm a noob in this new methods, can anyone please tell me how to use the PFT? I can't even find my phone on any COM port, I'm stuck
lgrodriguez1987 said:
Hi! Thanks for sharing the information. I was trying to get the "PFT_V1.5.zip" file but on the site appears to be unavailable. Do you have it available? Thanks again for sharing!
Click to expand...
Click to collapse
BTW, I found this one online, I think it should work too: https://zalexanninev15.github.io/PFT2/
PFT2 works, I checked it myself. You just need to download not the latest version from the releases, there are problems with the flash!
MuchelTy6 said:
PFT2 works, I checked it myself. You just need to download not the latest version from the releases, there are problems with the flash!
Click to expand...
Click to collapse
The author has fixed all the problems in the recent update of version 1.20. I checked for past errors, there are none, so it is worth using PFT2 instead of PFT (I suppose PFT2 is a further development of the utility without the "2" in the name )
Is there an app for rooting zte blade vita v9
Is there an app for rooting zte blade vita v9 can you make an easier tutorial for rooting zte blade vita v9 and explained step by step can you reupload the files are broken links here now what other alternatives you know for rooting this cellphone??????
Incomplete root rights
neagoelaur said:
Is there an app for rooting zte blade vita v9 can you make an easier tutorial for rooting zte blade vita v9 and explained step by step can you reupload the files are broken links here now what other alternatives you know for rooting this cellphone??????
Click to expand...
Click to collapse
You can't get full root rights on your smartphone without unlocking the bootloader. The loader can't be unlocked without the factory (test) MBN file. ZTE really steamed over this.
To get incomplete root rights you need to:
1. Download the archive from this link (I'm new, you can't leave links, so take the QR code)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Extract ZIP archive, flash "bootmagisk160.fdf" to "boot" partition (or flash "bootmagisk167.fdf" [Beta])
3. Through device recovery mode, erase (wipe) all data
4. Install the file "magisk583.apk" (or "magisk591.apk" [Beta] for "bootmagisk167.fdf") on Android and check for root rights
hi, is there a video on this or something? i really cant understand the steps (at least in the PFT2 i just cant seen to make it work)
Hello, Possessing two tablets of this brand, I was wondering if a custom recovery existed for this one, I can look everywhere on all the forums, Russian, English, etc ... But, I do not find.
If anyone can create one with this SOURCE CODE from the tablet that would be super nice.
I succeded to install twrp on my lenovo x606F.
1) extract recovery.img from a downloaded full firmware
2) download "Mediatek (MTK) Auto TWRP recovery porter by Team Hovatek" v. 1.6 and use it to create a twrp.img from your recovery
3) flash your twrp image by adb:
fastboot flash recovery twrp.img
4) then flash an empty vbmeta.img that you find on team hovatek site by this command (Method 3 - Flashing vbmeta https://forum.hovatek.com/thread-32719.html ):
fastboot --disable-verity flash vbmeta vbmeta.img
5) reboot in recovery. You will receive a message that your partition is encrypted. tap "cancel" and follow the steps indicated on this page (Method 3 - Patching fstab in /vendor partition using TWRP + Text editor https://forum.hovatek.com/thread-30160.html ). You have to backup on your microsd your two fstab.* files in /vendor/etc folder and then modify as indicated. Then, by twrp, overwite them on your original files.
6) reboot in android and flash your original recovery
7) reboot in your stock recovery and make a full data erase. YOU LOST ALL YOUR PERSONAL DATA.
8) reboot in android and reinstall twrp recovery
9) reboot in your full working twrp recovery and check if it is all ok.
When you boot in your twrp, your screen is black, so you have to push power button to light your screen. You can fix it
by checking all three option in magisk manager (keep encryption, keep verity and recovey mode) and reinstall magisk root.
I'm not responsable for any damage on your device. Sorry for my english
zeldoox said:
3) flash your twrp image by adb:
4) then flash an empty vbmeta.img
Click to expand...
Click to collapse
Are you sure? TWRP Recovery Porter says that vbmeta.img must be flashed BEFORE twrp image.
I made several attempts to install twrp. When I succeeded, I installed vbmeta.img after twrp. But, during my previous attempts, I had already installed vbmeta. So, it is possible that the right steps are to install it first.
So, did anyone else succeed with these steps?
Shijune said:
So, did anyone else succeed with these steps?
Click to expand...
Click to collapse
I haven't tried, I'm afraid a bricked my tablets
Shijune said:
So, did anyone else succeed with these steps?
Click to expand...
Click to collapse
Nope. I tried 3-4 times, no way. The only result is that my tab's clock becomes late 11k seconds after each reboot
Guys someone has a working twrp image for android 10?
maks44 said:
Nope. I tried 3-4 times, no way. The only result is that my tab's clock becomes late 11k seconds after each reboot
Click to expand...
Click to collapse
I just rooted Lenovo M8 FHD TB-8705F (Android 9) using the Hovatek Method 3 guide:
flashed empty vbmeta
flashed boot.img created by Magisk
I tried the steps above with the TB-X606F on Android 10 (I used the lenovo recovery tool to rescue os and ended up with android 10) and I am unable to get it working. If I flash the generated twrp image and the vbmeta one (doesn't matter which order) and reboot recovery I get a black screen and no amount of pushing the power button gets the screen to turn on. I have not tried the boot.img file generated by Magisk yet. Anyone have any thoughts on this?
dpn982 said:
I tried the steps above with the TB-X606F on Android 10 (I used the lenovo recovery tool to rescue os and ended up with android 10) and I am unable to get it working. If I flash the generated twrp image and the vbmeta one (doesn't matter which order) and reboot recovery I get a black screen and no amount of pushing the power button gets the screen to turn on. I have not tried the boot.img file generated by Magisk yet. Anyone have any thoughts on this?
Click to expand...
Click to collapse
Can you share the download link for Lenovo recovery tool? Thanks
MisterVik said:
Can you share the download link for Lenovo recovery tool? Thanks
Click to expand...
Click to collapse
https://download.lenovo.com/consumer/mobiles/rescue_and_smart_assistant_v5.3.0.21_signed_setup.exe
Hi all,
I got my TB-X606F today and I'm having a hard time getting fastboot to work. I installed the official MTK driver from google and in my device manager its visible as Android ADB Interface
on my tablet I see the fastboot mode in the lower left corner.
fastboot devices shows nothing on cmd.
Any ideas?
OS Windows 10
MOD EDIT: See here- https://forum.xda-developers.com/t/...sb-driver-installer-tool-for-windows.3999445/
Смотрите здесь-https://forum.xda-developers.com/t/tool-latest-adb-fastboot-and-usb-driver-installer-tool-for-windows.3999445/
acocalypso said:
Hi all,
I got my TB-X606F today and I'm having a hard time getting fastboot to work. I installed the official MTK driver from google and in my device manager its visible as Android ADB Interface
on my tablet I see the fastboot mode in the lower left corner.
fastboot devices shows nothing on cmd.
Any ideas?
OS Windows 10
Click to expand...
Click to collapse
I have the same problem and can't proceed rooting for this reason.
adb works fine. Device is shown, commands like reboot into fastboot mode works fine. But "fastboot devices" does not show an entry.
I've tried to (re-) install the drivers CDC, VCOM, ... several times. I'v tried the "Latest ADB Fastboot and USB Driver installer tool for Windows". Doesn't work.
In device manager, Android Bootloader Interface is shown with an error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any ideas?
To fix this update your driver to Samsung's adb interfrance and it will work.
I got my TB-X606F rooted but struggle to install TWRP. I believe I'm on Android 10, the latest? I used [Hovatek] Mediatek Auto TWRP Recovery Porter V1.7a by Team Hovatek because I couldn't find version 1.6. I got the recovery.img directly from TB-X606F_S300007_200923_BMP.zip. I select Android 10 in the Android Version and output the TWRP recovery. Then I flashed and flashed the vbmeta (both the version from my zip file and the version from Hovatek. Then I flashed using multiple instructions. When I boot to recovery, it just gives the orange box screen then eventually fully boots to OS. Anything I'm forgetting?
I upgraded to Android 10. I installed again twrp by "Mediatek Auto TWRP Recovery Porter V1.7a". Android 10 version don't work well. "Pie Kernel 4.9.117" version works perfectly. The steps I follow are similar to my previous post. Insted of "forceencrypt" there is "forcefdeorfbe" in fstab.mt6765 file.
zeldoox said:
I upgraded to Android 10. I installed again twrp by "Mediatek Auto TWRP Recovery Porter V1.7a". Android 10 version don't work well. "Pie Kernel 4.9.117" version works perfectly. The steps I follow are similar to my previous post. Insted of "forceencrypt" there is "forcefdeorfbe" in fstab.mt6765 file.
Click to expand...
Click to collapse
How did you get twrp installed plz help
zeldoox said:
I upgraded to Android 10. I installed again twrp by "Mediatek Auto TWRP Recovery Porter V1.7a". Android 10 version don't work well. "Pie Kernel 4.9.117" version works perfectly. The steps I follow are similar to my previous post. Insted of "forceencrypt" there is "forcefdeorfbe" in fstab.mt6765 file.
Click to expand...
Click to collapse
Can you plz make a video of your steps?