Hello my friends, I just made a careless action while formatting my f5122 in TWRP. I include to tick the box in 'System' (see attached)
And now, I think my f5122 is blank. It stuck at Sony boot logo. Did I softbricked it? What shall I do from scratch. Thanks alot for helping me.
Sorry moderators I'm in the wrong Forum. Please delete this thread.
If you have a backup restore it, otherwise flash a ROM
P.S: Wrong Section
THREAD CLOSED
Requested by OP.
Regards,
shadowstep
Forum Moderator
Related
Q&A for [RECOVERY][A3000-H] ClockworkMod Recovery [v6.0.5.1]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][A3000-H] ClockworkMod Recovery [v6.0.5.1]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
alexk56
It is so pity that neither CWM 6.0.4.9 nor 6.0.5.1 are not working.Both usually stop on boot creation.But-on opposite side - nice and
modern looking of theme.
alexk56 said:
It is so pity that neither CWM 6.0.4.9 nor 6.0.5.1 are not working.Both usually stop on boot creation.But-on opposite side - nice and
modern looking of theme.
Click to expand...
Click to collapse
They work.
BootImage Freeze
Hi Olivier,
I have the same problem as one already mentioned here ... when trying to make a NAndroid Backup it freezes on "Backing up boot image..."
The problem is that all the other CWM version shows some bug, like -backup /data error- or something so its a REAL problem to make NAND on this tablet...
On the other hand THX for Your work man! Sincerely, JayM
PS2MirXas: Yep, posting "they work" is really helpful...
Bug!
Hey Olivier,
I just downloaded your recovery from hubdroid.It came in a .tar folder which is quite amusing. Then I extracted the recovery.IMG from the .tar folder .I used both flashify and rashr to try flashing.It said success but when I rebooted into recovery it said no command ! I did reboot the system. But please help me onto this matter.
Need help for my lenovo Ideatab A3000 bootloop
Here's the whole story , I need to change build.prop to get apps for my tab that is not compatible . now I changed it using Es Explorer and i'm rooted I changed the Device model and brand something like that . then I read on the net that after changing build.prop reboot your device . Now i reboot my device then the whole lenovo logo goes landscape the boom I'm STUCKED! NOOO IM BOOT LOOP. Now for the most Easies way to do is to APPLY UPDATE FROM SD CARD . The question is Can someone give me the ZIP FILE like I just download it and put on my sd card then insert my sd card then Power + Volume up choose Recovery then "APPLY UPDATE FROM SD CARD" And just choose the Zip file. Please Help me Guys . THe only thing I changed is the build.prop I haven't changed the ROM . ONLY BUILD.PROP TO RECOVER!!
PLS.......
Will This work for lenovo B8000-H 4.4.2
this recovery working with lenovo a3300-hv?? tq.
Please update the download link for the recovery.
Says server not found.
Dear Experts,
as I have already complained in several topics, my N9005 didn't boot after encryption.
Now I'm on the way to try other ROMs. But now I'm starting to thing, how to even test it with other ROMs. I have a backup of the original ROM made with TWRP. BUT, if I encrypt the device and something goes wrong - then how will I restore ? Will TWRP be somehow able to read the encrypted device ? Please suggest on how to proceed ?
I'm afraid, that if I put a ROM and encrypt the phone with it, I'll be stuck with that ROM... Or if not - what to choose in TWRP in order to get rid of the encryption then ?
Many thanks in advance!
Did you use the phone with stock recovery to encrypt?
Duplicate.
Please follow your existing thread: http://forum.xda-developers.com/gal...encryption-t3478539/post69084515#post69084515
Closed
I tried already some topics here and I rooted my older Samsung phones before
But,
My J5 2016 510JN doesn't seem to be installing TWRP 3.0.2/3 by odin.
FRP lock is off and I got a succes with a reboot, but with up/home/power I still have stock recovery.
And after that offcource the supersu verification fail
Can someone tell me what i do wrong or need to check?
usb debugging is on
installing apk from unkown sources is on
OEM is onn (frp lock)
thanks in advance
For other people's search results:
untick the autoboot in odin, that seemed to be the problem...
thnx treat may be closed
This does not belong in the 2016 ROMS section. Please, for future posts, post in the Questions section.
Please, delete this TRASH anyone!
@Vatsal
Please move this thread to question and answer
?????
I tried to update to 5.1.4 of OxygenOS but I'm now stuck on boot circle animation
I have the Universal twrp codeworkx(twrp-3.2.1-0-universal-codeworkx-cheeseburger.img) from here: https://sourceforge.net/projects/cheeseburgerdumplings/files/15.1/cheeseburger/recovery/
I downloaded the image from the official Oneplus website.
Here is what i exactly did:
1. Flashed TWRP
2. Flashed the LineageOS from the TWRP
3. Wiped Dalvik/Cache
But it did not work
So i tried it again with 5.0.4 but no improvement, what should i do?
It is always stuck on the circle boot animation
Flamester said:
I tried to update to 5.1.4 of OxygenOS but I'm now stuck on boot circle animation
I have the Universal twrp codeworkx(twrp-3.2.1-0-universal-codeworkx-cheeseburger.img) from here: https://sourceforge.net/projects/cheeseburgerdumplings/files/15.1/cheeseburger/recovery/
I downloaded the image from the official Oneplus website.
Here is what i exactly did:
1. Flashed TWRP
2. Flashed the LineageOS from the TWRP
3. Wiped Dalvik/Cache
But it did not work
So i tried it again with 5.0.4 but no improvement, what should i do?
It is always stuck on the circle boot animation
Click to expand...
Click to collapse
Please post your question only once at one place, ongoing discussion here https://forum.xda-developers.com/oneplus-5/help/qa-help-thread-newbies-post-t3624656/post77294880
strongst said:
Please post your question only once at one place, ongoing discussion here https://forum.xda-developers.com/oneplus-5/help/qa-help-thread-newbies-post-t3624656/post77294880
Click to expand...
Click to collapse
Alright, I'll keep that in mind
strongst said:
Please post your question only once at one place, ongoing discussion here https://forum.xda-developers.com/oneplus-5/help/qa-help-thread-newbies-post-t3624656/post77294880
Click to expand...
Click to collapse
THREAD CLOSED as per the above.
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
Click to expand...
Click to collapse
Mod edit: Thread closed as duplicate of
samsung galaxy j5 J510fQ twrp problem
greetings, after processing the twrp file in odin, when I want to open the twrp menu of the device, first the system update is installed, then it says there is no command and then the old recovery menu comes, any idea? (device samsung galaxy j5...
forum.xda-developers.com
@sheeesh13 Please review the XDA Forum Rules with special emphasis on rule no. 5 and post only ONCE! Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
greetings, after processing the twrp file in odin, when I want to open the twrp menu of the device, first the system update is installed, then it says there is no command and then the old recovery menu comes, any idea?
Disable 'auto-reboot' in Odin first.
Then flash twrp.
When the flash in Odin is complete do not reboot your device, instead take the battery out (yes this sounds a bit weird but it's okay) and then reboot to recovery. Do not boot to system first or else the system will overwrite the custom recovery for stock recovery which happened to you and you will have to start again