Related
LG D801 (T-Mobile) Bricked[/U][/B]
The device has been bricked and is in this condition:
Download mode shows as dots and is not recognized by Windows (only occasionally as "Unknown Device")
No custom recovery (it has been wiped in fastboot)
No ROM (system was wiped)
It makes a nice paperweight
Click to expand...
Click to collapse
This device does not allow fastboot, unless there is a software issue (which I cannot purposely cause without ADB in a custom recovery).
I have tried every set of drivers on Windows 7 Ultimate (64 bit) and am unable to change the COM port to 41 because the device isn't recognized at all (it was being recognized last night, but the version of Windows I have didn't have ANY options to change the COM serial port).
No, a rooting method will not work (I'm a Recognized Developer, so trust me).
I have Linux and Windows 7 dual-booting.
I have used everything [URL="http://storagecow.eu/index.php?dir=Xda%2FLG+G2%2FStock%2F"]HERE
Click to expand...
Click to collapse
.
I have also tried THIS driver method (when the device was actually visible on Windows, but the driver never successfully installed).
I manually repartitioned the device using this method on Ubuntu, but accidentally used the stock recovery image.
I am trying to use this method, for Windows, with no luck (because of the phone not being recognized on Windows).
I have tried a friend's desktop with no luck. I have used different USB ports and cables, as well.
Any help at all would be greatly appreciated. Especially if I could somehow trigger fastboot.
Click to expand...
Click to collapse
Thanks in advance,
Mike Criggs
So you flashed LG's stock recovery, can you actually boot into that?
savoca said:
So you flashed LG's stock recovery, can you actually boot into that?
Click to expand...
Click to collapse
It just sticks at the "Processing factory reset..." message.
I need a miracle here, haha.
Your download mode works if there are no blue circles when you start it.
Try installing ubuntu, knoppix etc under vmware and see if it gives you any errors.
also under windows watch the devices under device manager.
bender_007 said:
Your download mode works if there are no blue circles when you start it.
Try installing ubuntu, knoppix etc under vmware and see if it gives you any errors.
also under windows watch the devices under device manager.
Click to expand...
Click to collapse
Oh if his download mode is just hanging at the loading screen but never gets to the loading circle it's most definitely a goner, considering his recovery hangs that probably confirms he dd'ed the wrong bootstack.
@MikeCriggs Check if you have fastboot mode when you try loading recovery or download mode (as the bootloader's fallback) - if not you need to RMA. No big deal I've killed 2 so far via bootloadery mischief.
Is there a JTAG like device out there that can fix this phone's hard bricks?
tiguy99 said:
Is there a JTAG like device out there that can fix this phone's hard bricks?
Click to expand...
Click to collapse
JTAG is disabled for G2.
savoca said:
JTAG is disabled for G2.
Click to expand...
Click to collapse
Has the op tried this method?
MikeCriggs said:
LG D801 (T-Mobile) Bricked
Thanks in advance,
Mike Criggs[/SIZE]
Click to expand...
Click to collapse
Did you make sure that when you put your device in download mode that you changed the port to COM41 in device manager?
tiguy99 said:
Has the op tried this method?
Click to expand...
Click to collapse
Thank god I'm good with hardware! I'll give this a try tomorrow, thank you!!!
Updated!
Thank you all for your help so far!
Updated!
Thank you all for your help so far!
MikeCriggs said:
Thank god I'm good with hardware! I'll give this a try tomorrow, thank you!!!
Click to expand...
Click to collapse
No worries!
Keep us posted on how it goes.
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
I was chasing for E9+ information and reviews and found this page that looks like a way to unbrick Mediatek based HTC phones (M9+, E9+...)
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://www.muzisoft.com/shuaji/100236.html&prev=search
vegetaleb said:
I was chasing for E9+ information and reviews and found this page that looks like a way to unbrick Mediatek based HTC phones (M9+, E9+...)
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://www.muzisoft.com/shuaji/100236.html&prev=search
Click to expand...
Click to collapse
thanx alot for ur reply.. but this is tutorial for flashing M9+.. i really checked before...
What exactly did you do to it?
When you plug it into your PC, what do you see in Device Manager?
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
What exactly steps did you do to brick?
iElvis said:
What exactly did you do to it?
When you plug it into your PC, what do you see in Device Manager?
Click to expand...
Click to collapse
simonbigwave said:
What exactly steps did you do to brick?
Click to expand...
Click to collapse
i used the partial flash file via SPFlashTool.. (device was rebooting on the bootloader mode) after successfully flashing device is not power on.. only vibrating.. pc detects the device Preloader USB Device..
t-mobile_mda said:
i used the partial flash file via SPFlashTool.. (device was rebooting on the bootloader mode) after successfully flashing device is not power on.. only vibrating.. pc detects the device Preloader USB Device..
Click to expand...
Click to collapse
device is not restarting the driver second time as Preloader Device...
You will probably have better luck posting in the M9+ forum. I have never heard of this flash tool, but the dedicated xda thread for it seems to be full of bricks.
From the sound of it, you either flashed the wrong file or flashed the right file to the wrong place.
Just curious if the pc detects the device will an RUU detect it?
bigp951 said:
Just curious if the pc detects the device will an RUU detect it?
Click to expand...
Click to collapse
Usually something like "USB Preloader Device" means a low-level brick because the PC can't tell what it is. For a RUU to work, it has to be detectable by ADB, not just Device Manager.
Would putting the RUU on the sdcard make any difference? I am still new to htc.
On my samsung I hard bricked once and recovered by putting a bin file on my sd card. There is an app called partition backup on play store that allows someone to make such file. Would that work? I think someone could make a backup and then post it.
https://play.google.com/store/apps/details?id=ma.wanam.partitions&hl=en
bigp951 said:
Would putting the RUU on the sdcard make any difference? I am still new to htc.
On my samsung I hard bricked once and recovered by putting a bin file on my sd card. There is an app called partition backup on play store that allows someone to make such file. Would that work? I think someone could make a backup and then post it.
https://play.google.com/store/apps/details?id=ma.wanam.partitions&hl=en
Click to expand...
Click to collapse
Not knowing what state he put it in, it's hard to say. Worth a try.
But if the bootloader is corrupted, the phone will never get to the point of reading the sdcard.
That flash tool seems scary to me... Sorry for not adding any advice!
TwinAdk said:
That flash tool seems scary to me...
Click to expand...
Click to collapse
I had the same thought, especially given the number of bricks reported in the thread.
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
A hardware un bricking tool (sure there used to be a tool for htc devices xtc was it? Could be wrong?) or RMA seems to be your only options now.
Obviously try the holding all buttons and waiting for the vibrate method then try to get to bootloader mode. If that fails I'd be aiming to get it replaced, good news is if it is totally bricked, chances are HTC will just think the bootloader went on you.
bigp951 said:
Just curious if the pc detects the device will an RUU detect it?
Click to expand...
Click to collapse
hi..
as i say above pc detects the device..preloader or mtk usbvcom... and only SDcard flashing possible.. not exist RUU..
0PK7IMG.zip
iElvis said:
Not knowing what state he put it in, it's hard to say. Worth a try.
But if the bootloader is corrupted, the phone will never get to the point of reading the sdcard.
Click to expand...
Click to collapse
really i tried all methods while it has rebooting the bootlaoder screen..i flashed the device with this tool finally..and totally dead..
TwinAdk said:
That flash tool seems scary to me... Sorry for not adding any advice!
Click to expand...
Click to collapse
iElvis said:
I had the same thought, especially given the number of bricks reported in the thread.
Click to expand...
Click to collapse
this flash tool is for MTK 6795 devices which HTC M9+ is one of them.. only these flashloaders accept it's scatter file.. (MT6795_Android_scatter.txt)
SP_Flash_Tool_exe_Windows_v5.1504.00.000
SP_Flash_Tool_exe_Windows_v5.1512.00.000
SP_Flash_Tool_exe_Windows_v5.1516.00.000
SP_Flash_Tool_exe_Windows_v5.1520.00.000
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
Hello, do you wonder if the device is for me the m9 plus vibration was just a brick in any com port
özkan72 said:
Hello, do you wonder if the device is for me the m9 plus vibration was just a brick in any com port
Click to expand...
Click to collapse
hi..
u mean u r on the same condition.? only vibrates and detects com port as Preloader..?
Hi.
My phone is bricked now.The phone can load 9008 mode.So I can use the qfil tool to unbrick it.But I need some files to rescue it. The file name like xxxx.mbn xxx.elf and rawprogram-flash0.xml.If you can provide
I was in the same situation as you. I tried reaching out to a couple forums and had no luck. I eventually ended up paying $199 to get a replacement from Essential. I believe that is the only option at this time. No one seems to have the emmc files for Essential phone yet.
rukesh18 said:
I was in the same situation as you. I tried reaching out to a couple forums and had no luck. I eventually ended up paying $199 to get a replacement from Essential. I believe that is the only option at this time. No one seems to have the emmc files for Essential phone yet.
Click to expand...
Click to collapse
you are right.
jackzhu said:
you are right.
Click to expand...
Click to collapse
So how'd you brick your phone?
jhill110 said:
So how'd you brick your phone?
Click to expand...
Click to collapse
I changed the blot to a by ADB command:laugh:
I also need QFIL image ...
me too.........
I can create an image but i'm having problems getting phone recognized by QFIL.
ZiemowitP said:
I can create one but i'm having problems getting phone recognized by QFIL.
Click to expand...
Click to collapse
Exactly the same. It's completely dead, not visible in the windows device manager or lsusb on linux either.
trantium said:
Exactly the same. It's completely dead, not visible in the windows device manager or lsusb on linux either.
Click to expand...
Click to collapse
If you turn it off. Press and hold the up volume button then plug in USB... it'll start and hang at the booting screen. Isn't that a way to enter the mode?
ZiemowitP said:
If you turn it off. Press and hold the up volume button then plug in USB... it'll start and hang at the booting screen. Isn't that a way to enter the mode?
Click to expand...
Click to collapse
Nope. When your turn it on, the backlight is dim so you can barely see the boot screen. Still no way to get it recognized on my pc
Any one have any luck with this?
Edl cable to enter in 9008 mode.
edl mode essential ph1
https://youtu.be/FSlqiVcIw34
ZiemowitP said:
I can create an image but i'm having problems getting phone recognized by QFIL.
Click to expand...
Click to collapse
help !can you give the image to me ?my PHONE has been dead to 9008
jackzhu said:
I changed the blot to a by ADB command:laugh:
Click to expand...
Click to collapse
Wait changed slot to a and it bricked your device ??? tell me more please i dont want to do something and get a brick?
stupidis said:
Wait changed slot to a and it bricked your device ??? tell me more please i dont want to do something and get a brick?
Click to expand...
Click to collapse
He probably had an empty slot....so when he switched it didn't have a bootloader on it or something ....I always flash a bts to both slots so it nvr will brick from swapping slots...
Tech_Savvy said:
He probably had an empty slot....so when he switched it didn't have a bootloader on it or something ....I always flash a bts to both slots so it nvr will brick from swapping slots...
Click to expand...
Click to collapse
How do you "flash a bts to both slots" LOL feelin Noob again what is BTS?
stupidis said:
How do you "flash a bts to both slots" LOL feelin Noob again what is BTS?
Click to expand...
Click to collapse
In the dev section there's a thread
stupidis said:
How do you "flash a bts to both slots" LOL feelin Noob again what is BTS?
Click to expand...
Click to collapse
It refers to Back To Stock and the thread is [STOCK][DUMPS][FIRMWARE] Essential stock firmware and rom dumps*.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
I have a TA-1033 version and a deep flash engerneering cable but im stuck of how to unbrick, my device is detected as QDLoader 9008, also if i try to flash using NOST i get "polling USB device" then a "DEVICE_NOT_CONFIGURE" its an 0x4000 error
if anyone can help me out that would be great!
Sent from my AGS_W09
I have same problem. I don't know what i do, but seems to when i charge my phone over 80 %.
Then i get it download mode and i change edl cable to regular usb cable and then fastboot reconise my phone and i can flash it succesfull.
DoggyStar said:
I have same problem. I don't know what i do, but seems to when i charge my phone over 80 %.
Then i get it download mode and i change edl cable to regular usb cable and then fastboot reconise my phone and i can flash it succesfull.
Click to expand...
Click to collapse
Its completely dead, only detected as QHSUSB BULK and like i said i got one of those deep flash cables from shenzen
When you but it on, can you see android text or just "you phone is unlocked text"?
My phone only shows that unlock text, but after I use edl cable i can get android text showing up.
DoggyStar said:
When you but it on, can you see android text or just "you phone is unlocked text"?
My phone only shows that unlock text, but after I use edl cable i can get android text showing up.
Click to expand...
Click to collapse
No mine just doesnt vibrate or anything
And you have full battery?
DoggyStar said:
And you have full battery?
Click to expand...
Click to collapse
I dont know because its dead as in it wont show any signs of life
Yes yes, but put it ac charger for 2-3 hours and see if you then see something or can you then get it fastboot mode.
My phone has low battery but when I charge it, fastboot start working magically.
DoggyStar said:
Yes yes, but put it ac charger for 2-3 hours and see if you then see something or can you then get it fastboot mode.
My phone has low battery but when I charge it, fastboot start working magically.
Click to expand...
Click to collapse
I modified my aboot.img because i thought i could downgrade but that killed my device
mattwhite7102 said:
I modified my aboot.img because i thought i could downgrade but that killed my device
Click to expand...
Click to collapse
Does qpst tool worked for you?
Emmykay223 said:
Does qpst tool worked for you?
Click to expand...
Click to collapse
Nope, i dont have the files for QPST, but i do have the qfil files and one of those deep flash cables, if you can get my phone fixed i will respect you forever!
mattwhite7102 said:
Nope, i dont have the files for QPST, but i do have the qfil files and one of those deep flash cables, if you can get my phone fixed i will respect you forever!
Click to expand...
Click to collapse
No no i don't want that , if i could help you surely i will .. download qpst tool and Qualcomm drivers on your pc or laptop , if you did all the things and nothing happened yet, so why you don't try this too? We never know which things could give us better results. Hope for the best ??
https://www.qpstflash.com
Download qpst from here
Emmykay223 said:
No no i don't want that , if i could help you surely i will .. download qpst tool and Qualcomm drivers on your pc or laptop , if you did all the things and nothing happened yet, so why you don't try this too? We never know which things could give us better results. Hope for the best ??
https://www.qpstflash.com
Download qpst from here
Click to expand...
Click to collapse
Well i downloaded the 2.7.453 of qpst and flashing with qfil gives me SAHARA_NAK_MEMORY_DEBUG_NOT_SUPPORTED though whats strange is different versions of qfil gives me different errors...
mattwhite7102 said:
Well i downloaded the 2.7.453 of qpst and flashing with qfil gives me SAHARA_NAK_MEMORY_DEBUG_NOT_SUPPORTED though whats strange is different versions of qfil gives me different errors...
Click to expand...
Click to collapse
Does it able to be detected by qpst.
And did you install Qualcomm drivers?
Just look at this .
Hope all of your problems would clear
Emmykay223 said:
Does it able to be detected by qpst.
And did you install Qualcomm drivers?
Just look at this .
Hope all of your problems would clear
Click to expand...
Click to collapse
It does get detected by qpst, might be a driver issue
Emmykay223 said:
Does it able to be detected by qpst.
And did you install Qualcomm drivers?
Just look at this .
Hope all of your problems would clear
Click to expand...
Click to collapse
Nope tried it but coming up with "unable to download flash programmer with sahara protocol"
mattwhite7102 said:
Nope tried it but coming up with "unable to download flash programmer with sahara protocol"
Click to expand...
Click to collapse
Download another android flash zip files from here, 8.0 or 9.0 directly hope it would work
Emmykay223 said:
Download another android flash zip files from here, 8.0 or 9.0 directly hope it would work
Click to expand...
Click to collapse
Can you link me for the TA-1033? its gotta be qfil because my phone doesnt show any signs of life!
mattwhite7102 said:
Can you link me for the TA-1033? its gotta be qfil because my phone doesnt show any signs of life!
Click to expand...
Click to collapse
https://www.google.com/amp/s/forum....-6/help/nokia-6-ota-update-ddls-t3721424/amp/
Emmykay223 said:
https://www.google.com/amp/s/forum....-6/help/nokia-6-ota-update-ddls-t3721424/amp/
Click to expand...
Click to collapse
I cant install these because my phone gets detcted as QHSUSB BULK
Hi all,
So basically I was trying to install Pixelexperience to my Note 7 today and I messed it up big time. So I was having some issues with TWRP and one of the solutions (according to posts I found on Google) was to update the phone firmware. So I went to do that. Downloaded the lavander firmware for my Note 7, put it in the folder with other stuff I was downloading. One of these was firmware for Redmi A5 (which I didn't notice) and ended up flashing that. Now my phones screen is dead (I guess the rest of it also?). When I plug it in to PC the PC produces the sounds that something connected but running fastbood / adb devices doesn't return anything. I tried multiple times booting to fastboot / recovery but I have no idea when the phone is on or off. So it just produces sound on PC that it disconnected and connected like 1 second after but nothing still shows up on fastboot.
Did anyone had similiar issue and is there anything I can do? Or should I go look for a new phone?
Thank you for your time
Try to flash the whole rom again.
VD171 said:
Try to flash the whole rom again.
Click to expand...
Click to collapse
Well, I thought about that, but I don't know how to flash it since it seems I can't boot into fastboot. I've tried countless times and failed every time
vivida said:
Well, I thought about that, but I don't know how to flash it since it seems I can't boot into fastboot. I've tried countless times and failed every time
Click to expand...
Click to collapse
Try any tool:
Xiaomitool: https://www.xiaomitool.com/V2/Miflashpro: https://miflashpro.com/Miflashtool: https://xiaomiflashtool.com/
VD171 said:
Try any tool:
Xiaomitool: https://www.xiaomitool.com/V2/Miflashpro: https://miflashpro.com/Miflashtool: https://xiaomiflashtool.comI have tried but I just can't get the devices to boot into fastboot and I have no idea in what state it is since the screen doesn't show anything
Click to expand...
Click to collapse
Can you enter in recovery ?
VD171 said:
Can you enter in recovery ?
Click to expand...
Click to collapse
No, the same thing is happening. I just get the sound on PC and that's about it. It isn't recognized by the PC or any software that I tried to use
Try to get new cable and it will work
Eslamloka said:
Try to get new cable and it will work
Click to expand...
Click to collapse
After that's make your phone in edl mode then flash stock miui with miflash tool
Eslamloka said:
After that's make your phone in edl mode then flash stock miui with miflash tool
Click to expand...
Click to collapse
I receive cannot receive hello packet error message now
vivida said:
I receive cannot receive hello packet error message now
Click to expand...
Click to collapse
Sorry but i can't understand,,,is u tried to change a cable and it's working or not
Eslamloka said:
Sorry but i can't understand,,,is u tried to change a cable and it's working or not
Click to expand...
Click to collapse
I tried changing it but it doesn't work. The problem is I can't flash anything on MiFlash because it requires something like technicians account
vivida said:
I tried changing it but it doesn't work. The problem is I can't flash anything on MiFlash because it requires something like technicians account
Click to expand...
Click to collapse
before miflash firstly you must connect your phone with pc or laptop