I have a TA-1033 version and a deep flash engerneering cable but im stuck of how to unbrick, my device is detected as QDLoader 9008, also if i try to flash using NOST i get "polling USB device" then a "DEVICE_NOT_CONFIGURE" its an 0x4000 error
if anyone can help me out that would be great!
Sent from my AGS_W09
I have same problem. I don't know what i do, but seems to when i charge my phone over 80 %.
Then i get it download mode and i change edl cable to regular usb cable and then fastboot reconise my phone and i can flash it succesfull.
DoggyStar said:
I have same problem. I don't know what i do, but seems to when i charge my phone over 80 %.
Then i get it download mode and i change edl cable to regular usb cable and then fastboot reconise my phone and i can flash it succesfull.
Click to expand...
Click to collapse
Its completely dead, only detected as QHSUSB BULK and like i said i got one of those deep flash cables from shenzen
When you but it on, can you see android text or just "you phone is unlocked text"?
My phone only shows that unlock text, but after I use edl cable i can get android text showing up.
DoggyStar said:
When you but it on, can you see android text or just "you phone is unlocked text"?
My phone only shows that unlock text, but after I use edl cable i can get android text showing up.
Click to expand...
Click to collapse
No mine just doesnt vibrate or anything
And you have full battery?
DoggyStar said:
And you have full battery?
Click to expand...
Click to collapse
I dont know because its dead as in it wont show any signs of life
Yes yes, but put it ac charger for 2-3 hours and see if you then see something or can you then get it fastboot mode.
My phone has low battery but when I charge it, fastboot start working magically.
DoggyStar said:
Yes yes, but put it ac charger for 2-3 hours and see if you then see something or can you then get it fastboot mode.
My phone has low battery but when I charge it, fastboot start working magically.
Click to expand...
Click to collapse
I modified my aboot.img because i thought i could downgrade but that killed my device
mattwhite7102 said:
I modified my aboot.img because i thought i could downgrade but that killed my device
Click to expand...
Click to collapse
Does qpst tool worked for you?
Emmykay223 said:
Does qpst tool worked for you?
Click to expand...
Click to collapse
Nope, i dont have the files for QPST, but i do have the qfil files and one of those deep flash cables, if you can get my phone fixed i will respect you forever!
mattwhite7102 said:
Nope, i dont have the files for QPST, but i do have the qfil files and one of those deep flash cables, if you can get my phone fixed i will respect you forever!
Click to expand...
Click to collapse
No no i don't want that , if i could help you surely i will .. download qpst tool and Qualcomm drivers on your pc or laptop , if you did all the things and nothing happened yet, so why you don't try this too? We never know which things could give us better results. Hope for the best ??
https://www.qpstflash.com
Download qpst from here
Emmykay223 said:
No no i don't want that , if i could help you surely i will .. download qpst tool and Qualcomm drivers on your pc or laptop , if you did all the things and nothing happened yet, so why you don't try this too? We never know which things could give us better results. Hope for the best ??
https://www.qpstflash.com
Download qpst from here
Click to expand...
Click to collapse
Well i downloaded the 2.7.453 of qpst and flashing with qfil gives me SAHARA_NAK_MEMORY_DEBUG_NOT_SUPPORTED though whats strange is different versions of qfil gives me different errors...
mattwhite7102 said:
Well i downloaded the 2.7.453 of qpst and flashing with qfil gives me SAHARA_NAK_MEMORY_DEBUG_NOT_SUPPORTED though whats strange is different versions of qfil gives me different errors...
Click to expand...
Click to collapse
Does it able to be detected by qpst.
And did you install Qualcomm drivers?
Just look at this .
Hope all of your problems would clear
Emmykay223 said:
Does it able to be detected by qpst.
And did you install Qualcomm drivers?
Just look at this .
Hope all of your problems would clear
Click to expand...
Click to collapse
It does get detected by qpst, might be a driver issue
Emmykay223 said:
Does it able to be detected by qpst.
And did you install Qualcomm drivers?
Just look at this .
Hope all of your problems would clear
Click to expand...
Click to collapse
Nope tried it but coming up with "unable to download flash programmer with sahara protocol"
mattwhite7102 said:
Nope tried it but coming up with "unable to download flash programmer with sahara protocol"
Click to expand...
Click to collapse
Download another android flash zip files from here, 8.0 or 9.0 directly hope it would work
Emmykay223 said:
Download another android flash zip files from here, 8.0 or 9.0 directly hope it would work
Click to expand...
Click to collapse
Can you link me for the TA-1033? its gotta be qfil because my phone doesnt show any signs of life!
mattwhite7102 said:
Can you link me for the TA-1033? its gotta be qfil because my phone doesnt show any signs of life!
Click to expand...
Click to collapse
https://www.google.com/amp/s/forum....-6/help/nokia-6-ota-update-ddls-t3721424/amp/
Emmykay223 said:
https://www.google.com/amp/s/forum....-6/help/nokia-6-ota-update-ddls-t3721424/amp/
Click to expand...
Click to collapse
I cant install these because my phone gets detcted as QHSUSB BULK
Related
Hey guys I just installed the full image of 7.1.2 beta 2 over top of beta 1 using Flashfire without the bootloader and modem selected and all went fine until I decided to use Flashfire to upgrade the bootloader and modem forgetting that we must use Fastboot as I am new to Flashfire and I was reading all through the beta thread before I did it and didn't understand we still must use Fastboot so anyways I am stuck in a hard brick now with the phone not powering on at all and can't do anything to restore it as my Windows 10 now detects the phone as unknown device (device descriptor request failed) is there anything I can do at this point as I just bought this phone used.
The error that I got in Flashfire was that the device storage is full when updating the bootloader as the modem went fine.
@rmorris003
You said the phone won't even power on. You mean no Google? Hold the power button down for a couple of minutes and see if it will reboot. If not put it on a charger, and after fully charging try the long press power button again. If you can get it to start, try to put it in fastboot mode. (ie. power+vol dn). If you can get to bootloader you can send fastboot commands and fix it. If you can get to this point, there are instructions here.
rmorris003 said:
Hey guys I just installed the full image of 7.1.2 beta 2 over top of beta 1 using Flashfire without the bootloader and modem selected and all went fine until I decided to use Flashfire to upgrade the bootloader and modem forgetting that we must use Fastboot as I am new to Flashfire and I was reading all through the beta thread before I did it and didn't understand we still must use Fastboot so anyways I am stuck in a hard brick now with the phone not powering on at all and can't do anything to restore it as my Windows 10 now detects the phone as unknown device (device descriptor request failed) is there anything I can do at this point as I just bought this phone used.
The error that I got in Flashfire was that the device storage is full when updating the bootloader as the modem went fine.
Click to expand...
Click to collapse
Hello... Well if your device is recognized as unknown, you could try to give this a shot:
https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
Try to install Qualcomm driver first check the device manager. If you see your phone recognized as:
HS-USB QDLOADER 9008
You may be lucky!
Good luck...
5.1 said:
Hello... Well if your device is recognized as unknown, you could try to give this a shot:
https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
Try to install Qualcomm driver first check the device manager. If you see your phone recognized as:
HS-USB QDLOADER 9008
You may be lucky!
Good luck...
Click to expand...
Click to collapse
I will try this when I get back from work, I just cant get my pc to see it as anything other than unknown device as it says this is the best driver for it.
rmorris003 said:
I will try this when I get back from work, I just cant get my pc to see it as anything other than unknown device as it says this is the best driver for it.
Click to expand...
Click to collapse
I see... There's a txt file in the driver folder. Follow its instructions.
Good luck...
5.1 said:
I see... There's a txt file in the driver folder. Follow its instructions.
Good luck...
Click to expand...
Click to collapse
I am stumped, I have disabled driver enforcement and can't get any drivers to see my phone so I am not sure what to do.
rmorris003 said:
I am stumped, I have disabled driver enforcement and can't get any drivers to see my phone so I am not sure what to do.
Click to expand...
Click to collapse
You disabled driver signature and rebooted your computer? Then installed Qualcomm drivers from the thread I linked you to? I think you have to reboot your computer once more...
Good luck...
I held the power and vol down and now it shows up under com ports so this is a good sign.
Ok got bootloader back and now put twrp on, I had to use qfil with nexus6p_fix_bricked but it got stuck at writing system.img but atleast the phone is on now.
Flashed the 7.1.2 beta 2 full image using the fastboot method included and all is back to normal.
Thanks so much for the help.
rmorris003 said:
Ok got bootloader back and now put twrp on, I had to use qfil with nexus6p_fix_bricked but it got stuck at writing system.img but atleast the phone is on now.
Flashed the 7.1.2 beta 2 full image using the fastboot method included and all is back to normal.
Thanks so much for the help.
Click to expand...
Click to collapse
Wow glad it worked for you... You might push the thanks button in the OP of the thread where you found the debrick tools and thanks @tenfar since he offered the solution. He already saved a few N6P devices. I only linked you to his thread which you could have found yourself anyway...
Cheers...
5.1 said:
Wow glad it worked for you... You might push the thanks button in the OP of the thread where you found the debrick tools and thanks @tenfar since he offered the solution. He already saved a few N6P devices. I only linked you to his thread which you could have found yourself anyway...
Cheers...
Click to expand...
Click to collapse
I'm pretty sure I was reading it before but I had to do some extensive reading on how to get the driver to read properly. I work night shift so I was kinda tired yesterday.
rmorris003 said:
I'm pretty sure I was reading it before but I had to do some extensive reading on how to get the driver to read properly. I work night shift so I was kinda tired yesterday.
Click to expand...
Click to collapse
You could report your experience in the other thread. Maybe it could help other users who faced the issue you had. :good:
Cheers...
rmorris003 said:
I'm pretty sure I was reading it before but I had to do some extensive reading on how to get the driver to read properly. I work night shift so I was kinda tired yesterday.
Click to expand...
Click to collapse
Hi there, I'm extremely new to Forums and the whole android scene please could you help?
I have the same issue with my Nexus 6P Hard bricked, only detected as a 9008 Port, no vibrations no power nothing!
I've tried to follow so many guides for the past three days however I've managed nothing. I've tried to do as you mentioned in the first posts, used the nexus6p_unbrick in Qfil but Sahara download fails.
Please Please Help, No Warranty just a Brick!
Clarkeofcurtis said:
Hi there, I'm extremely new to Forums and the whole android scene please could you help?
I have the same issue with my Nexus 6P Hard bricked, only detected as a 9008 Port, no vibrations no power nothing!
I've tried to follow so many guides for the past three days however I've managed nothing. I've tried to do as you mentioned in the first posts, used the nexus6p_unbrick in Qfil but Sahara download fails.
Please Please Help, No Warranty just a Brick!
Click to expand...
Click to collapse
I have the same exact problem, everytime i try to flash with qfil it says it can't connect to my COMPORT
Clarkeofcurtis said:
Hi there, I'm extremely new to Forums and the whole android scene please could you help?
I have the same issue with my Nexus 6P Hard bricked, only detected as a 9008 Port, no vibrations no power nothing!
I've tried to follow so many guides for the past three days however I've managed nothing. I've tried to do as you mentioned in the first posts, used the nexus6p_unbrick in Qfil but Sahara download fails.
Please Please Help, No Warranty just a Brick!
Click to expand...
Click to collapse
Falitheman said:
I have the same exact problem, everytime i try to flash with qfil it says it can't connect to my COMPORT
Click to expand...
Click to collapse
Hello,
Someone mentioned this in another post:
Hold volume up and plug the USB cord to.your computer and start qfil flash. Keep holding volume up until the flash ends...
Good luck...
5.1 said:
Hello,
Someone mentioned this in another post:
Hold volume up and plug the USB cord to.your computer and start qfil flash. Keep holding volume up until the flash ends...
Good luck...
Click to expand...
Click to collapse
So i have some good news...it connects now. it says start sending programmer but then it says download failed: unable to download flash programmer using sahara protocol and then it fails. Any help?:crying:
Falitheman said:
So i have some good news...it connects now. it says start sending programmer but then it says download failed: unable to download flash programmer using sahara protocol and then it fails. Any help?:crying:
Click to expand...
Click to collapse
Hey,
What version of qpst did you install?
Good luck...
5.1 said:
Hey,
What version of qpst did you install?
Good luck...
Click to expand...
Click to collapse
I am using 2.7.441
Update: It seemed to be working for a second but then it says download failed: qsahara server fail: process fail. Any idea what that means? I really need my phone back
Falitheman said:
I am using 2.7.441
Update: It seemed to be working for a second but then it says download failed: qsahara server fail: process fail. Any idea what that means? I really need my phone back
Click to expand...
Click to collapse
Hey,
Google qpst 2.7.453
It's easy to find. Scan the files on virustotal.com though.
Maybe the older versions are incompatible...
Good luck...
5.1 said:
Hey,
Google qpst 2.7.453
It's easy to find. Scan the files on virustotal.com though.
Maybe the older versions are incompatible...
Good luck...
Click to expand...
Click to collapse
I tried with the version you suggested and i got the same error i just had. Can you send me your version so i can see if that works?
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
Can you enter fastboot mode?
No
varben said:
Can you enter fastboot mode?
Click to expand...
Click to collapse
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Anantha47 said:
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Click to expand...
Click to collapse
You are in Diagnostics mode, it's pretty useless, you need to enter in EDL Mode and try a flash with MiFlashTool
Use "fastboot oem edl"
I don't know if your phone can receive fastboot commands in Diagnostics, just try...
Can you please elaborate what have you done prior to the device brick? An informative answer requires an informative question.
Alanjameson99 said:
Can you please elaborate what have you done prior to the device brick? An informative answer requires an informative question.
Click to expand...
Click to collapse
I tried to install super su from boooting twrp !
Anantha47 said:
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Click to expand...
Click to collapse
What about keeping power and volume +/- pressed together for at least 10 seconds?
Too, connect the charger, maybe the battery is drained.
At least try these simple things before moving to complicated ones.
varben said:
What about keeping power and volume +/- pressed together for at least 10 seconds?
Too, connect the charger, maybe the battery is drained.
At least try these simple things before moving to complicated ones.
Click to expand...
Click to collapse
im 100% sure battery is above 70
Anantha47 said:
im 100% sure battery is above 70
Click to expand...
Click to collapse
Another thing to try is this, connect your phone with your computer and run
adb reboot edl
You will not see anything in your phone, just black screen.
Open miflash tool and hit refresh. See if it recognizes the phone.
varben said:
Another thing to try is this, connect your phone with your computer and run
adb reboot edl
You will not see anything in your phone, just black screen.
Open miflash tool and hit refresh. See if it recognizes the phone.
Click to expand...
Click to collapse
Already tried that mate it's showing either "sahara read end error with status 9" or "object reference not set to an instance of an object" the thing is I cant go into fast boot mode adb isn't recognising my device or even fastboot
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Anantha47 said:
Already tried that mate it's showing either "sahara read end error with status 9" or "object reference not set to an instance of an object" the thing is I cant go into fast boot mode adb isn't recognising my device or even fastboot
Click to expand...
Click to collapse
At least mi flash is recognizing the phone.
You can try with a different firmware, try with android 7 firmware.
P.s. now that I see better your phone is recognized as Qualcomm HS-USB Diagnostics 900E, it should be 9008
You should try to find the correct Qualcomm drivers...
I'm sorry you have to go through this.
om_latex said:
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Click to expand...
Click to collapse
Can you please tell me or give m link for Qualcomm drivers I messed up drivers in the process
Anantha47 said:
Can you please tell me or give m link for Qualcomm drivers I messed up drivers in the process
Click to expand...
Click to collapse
Check this:
http://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
varben said:
Check this:
http://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
Click to expand...
Click to collapse
I couldn't install those drivers it says windows need 64 bit drivers
om_latex said:
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Click to expand...
Click to collapse
There is a major diff in vid and for me! he has working fastboot and i dont so i cant use EDL too but thanks for suggesting
Anantha47 said:
I couldn't install those drivers it says windows need 64 bit drivers
Click to expand...
Click to collapse
Ok, try these:
https://www.dropbox.com/s/a3i7aqkwjonkwmu/QDLoader HS-USB Driver.7z?dl=0
varben said:
Ok, try these:
https://www.dropbox.com/s/a3i7aqkwjonkwmu/QDLoader HS-USB Driver.7z?dl=0
Click to expand...
Click to collapse
Thank you for your continuous support mate but my device is not listed in either adb or fastboot commands , hence that the method suggested my on_Latex is not going to work :'(
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
connect your mobile to pc using usb cable and try pressing volume down and power button( or just press all three vol+ ,vol- and powerbutton ) untill it gets to fastboot mode
at last you will go to fastboot
i tried the same thing when i was in the same situation it worked for me
let me know is it working for you or not
SrikanthMergu said:
connect your mobile to pc using usb cable and try pressing volume down and power button( or just press all three vol+ ,vol- and powerbutton ) untill it gets to fastboot mode
at last you will go to fastboot
i tried the same thing when i was in the same situation it worked for me
let me know is it working for you or not
Click to expand...
Click to collapse
That's the thing i cant get into fast boot! the screen turns on white mi logo appears and then goes black after i press vol down + power
Hi.
My phone is bricked now.The phone can load 9008 mode.So I can use the qfil tool to unbrick it.But I need some files to rescue it. The file name like xxxx.mbn xxx.elf and rawprogram-flash0.xml.If you can provide
I was in the same situation as you. I tried reaching out to a couple forums and had no luck. I eventually ended up paying $199 to get a replacement from Essential. I believe that is the only option at this time. No one seems to have the emmc files for Essential phone yet.
rukesh18 said:
I was in the same situation as you. I tried reaching out to a couple forums and had no luck. I eventually ended up paying $199 to get a replacement from Essential. I believe that is the only option at this time. No one seems to have the emmc files for Essential phone yet.
Click to expand...
Click to collapse
you are right.
jackzhu said:
you are right.
Click to expand...
Click to collapse
So how'd you brick your phone?
jhill110 said:
So how'd you brick your phone?
Click to expand...
Click to collapse
I changed the blot to a by ADB command:laugh:
I also need QFIL image ...
me too.........
I can create an image but i'm having problems getting phone recognized by QFIL.
ZiemowitP said:
I can create one but i'm having problems getting phone recognized by QFIL.
Click to expand...
Click to collapse
Exactly the same. It's completely dead, not visible in the windows device manager or lsusb on linux either.
trantium said:
Exactly the same. It's completely dead, not visible in the windows device manager or lsusb on linux either.
Click to expand...
Click to collapse
If you turn it off. Press and hold the up volume button then plug in USB... it'll start and hang at the booting screen. Isn't that a way to enter the mode?
ZiemowitP said:
If you turn it off. Press and hold the up volume button then plug in USB... it'll start and hang at the booting screen. Isn't that a way to enter the mode?
Click to expand...
Click to collapse
Nope. When your turn it on, the backlight is dim so you can barely see the boot screen. Still no way to get it recognized on my pc
Any one have any luck with this?
Edl cable to enter in 9008 mode.
edl mode essential ph1
https://youtu.be/FSlqiVcIw34
ZiemowitP said:
I can create an image but i'm having problems getting phone recognized by QFIL.
Click to expand...
Click to collapse
help !can you give the image to me ?my PHONE has been dead to 9008
jackzhu said:
I changed the blot to a by ADB command:laugh:
Click to expand...
Click to collapse
Wait changed slot to a and it bricked your device ??? tell me more please i dont want to do something and get a brick?
stupidis said:
Wait changed slot to a and it bricked your device ??? tell me more please i dont want to do something and get a brick?
Click to expand...
Click to collapse
He probably had an empty slot....so when he switched it didn't have a bootloader on it or something ....I always flash a bts to both slots so it nvr will brick from swapping slots...
Tech_Savvy said:
He probably had an empty slot....so when he switched it didn't have a bootloader on it or something ....I always flash a bts to both slots so it nvr will brick from swapping slots...
Click to expand...
Click to collapse
How do you "flash a bts to both slots" LOL feelin Noob again what is BTS?
stupidis said:
How do you "flash a bts to both slots" LOL feelin Noob again what is BTS?
Click to expand...
Click to collapse
In the dev section there's a thread
stupidis said:
How do you "flash a bts to both slots" LOL feelin Noob again what is BTS?
Click to expand...
Click to collapse
It refers to Back To Stock and the thread is [STOCK][DUMPS][FIRMWARE] Essential stock firmware and rom dumps*.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
I was flashing my device
flash is completed
but my mobile didn't reboot
and now my mobile is not turn on
and not charging and i can't turn it on fastboot
what's wrong with my mobile?
please anyone explain??
i need help
c1w3xx said:
I was flashing my device
flash is completed
but my mobile didn't reboot
and now my mobile is not turn on
and not charging and i can't turn it on fastboot
what's wrong with my mobile?
please anyone explain??
i need help
Click to expand...
Click to collapse
very bad, care to share exactly what you did so others don't make the same mistake.
Calm down, explain this in a better way. What did you do, step by step?
I was flashing Global rom
Kafei said:
Calm down, explain this in a better way. What did you do, step by step?
Click to expand...
Click to collapse
That time i was flashing my mobile
for unroot
Now i tell you how it's brick
1. First I turn it on at fastboot
2. I downloaded Global version Rom for flash
3. Open MI flashtool For flash my mobile
4. All is completed
5. Mobile Turned Off
6. NOw it's still of not turn it on
7. Then i try to open fastboot again
8. but it's not running
I think it is bricked
Now how can i unbrick it?
(Sorry For my typeing... I'm week at English)
Did you flash the correct rom? When you plug USB to pc, does it detect anything at all? Does it had enough battery when you were flashing it?
agenius5 said:
Did you flash the correct rom? When you plug USB to pc, does it detect anything at all? Does it had enough battery when you were flashing it?
Click to expand...
Click to collapse
Yes, i did flash the correct rom
Now when i plug USB to pc, it detect Qualcomm HS-USB QDLoader 9008 at Computer Device manager.
Yes It has 50% more battery .
I think it is bricked :'(
Try test point method. I know its dangerous but it works.
mayukh2000 said:
Try test point method. I know its dangerous but it works.
Click to expand...
Click to collapse
Can i flash my mobile with test poin method??
rickyreyne said:
Youtube
Click to expand...
Click to collapse
Is that work perfectly?
c1w3xx said:
Is that work perfectly?
Click to expand...
Click to collapse
Ya that works.
c1w3xx said:
Is that work perfectly?
Click to expand...
Click to collapse
Sure
I also have a Dead phone. I woke up in the morning late because my alarm didnt go off and found my phone wouldnt turn on. I couldnt even boot to recovery. The charge light no longer comes on either. Would anyone know a fix? Is there a diode or a capacitor that can be replaced?
i flash my phone in same situation and i try with test pointe but nothing work help
Phone is probably in EDL mode, try reflashing with MiFlash again
Hi all,
So basically I was trying to install Pixelexperience to my Note 7 today and I messed it up big time. So I was having some issues with TWRP and one of the solutions (according to posts I found on Google) was to update the phone firmware. So I went to do that. Downloaded the lavander firmware for my Note 7, put it in the folder with other stuff I was downloading. One of these was firmware for Redmi A5 (which I didn't notice) and ended up flashing that. Now my phones screen is dead (I guess the rest of it also?). When I plug it in to PC the PC produces the sounds that something connected but running fastbood / adb devices doesn't return anything. I tried multiple times booting to fastboot / recovery but I have no idea when the phone is on or off. So it just produces sound on PC that it disconnected and connected like 1 second after but nothing still shows up on fastboot.
Did anyone had similiar issue and is there anything I can do? Or should I go look for a new phone?
Thank you for your time
Try to flash the whole rom again.
VD171 said:
Try to flash the whole rom again.
Click to expand...
Click to collapse
Well, I thought about that, but I don't know how to flash it since it seems I can't boot into fastboot. I've tried countless times and failed every time
vivida said:
Well, I thought about that, but I don't know how to flash it since it seems I can't boot into fastboot. I've tried countless times and failed every time
Click to expand...
Click to collapse
Try any tool:
Xiaomitool: https://www.xiaomitool.com/V2/Miflashpro: https://miflashpro.com/Miflashtool: https://xiaomiflashtool.com/
VD171 said:
Try any tool:
Xiaomitool: https://www.xiaomitool.com/V2/Miflashpro: https://miflashpro.com/Miflashtool: https://xiaomiflashtool.comI have tried but I just can't get the devices to boot into fastboot and I have no idea in what state it is since the screen doesn't show anything
Click to expand...
Click to collapse
Can you enter in recovery ?
VD171 said:
Can you enter in recovery ?
Click to expand...
Click to collapse
No, the same thing is happening. I just get the sound on PC and that's about it. It isn't recognized by the PC or any software that I tried to use
Try to get new cable and it will work
Eslamloka said:
Try to get new cable and it will work
Click to expand...
Click to collapse
After that's make your phone in edl mode then flash stock miui with miflash tool
Eslamloka said:
After that's make your phone in edl mode then flash stock miui with miflash tool
Click to expand...
Click to collapse
I receive cannot receive hello packet error message now
vivida said:
I receive cannot receive hello packet error message now
Click to expand...
Click to collapse
Sorry but i can't understand,,,is u tried to change a cable and it's working or not
Eslamloka said:
Sorry but i can't understand,,,is u tried to change a cable and it's working or not
Click to expand...
Click to collapse
I tried changing it but it doesn't work. The problem is I can't flash anything on MiFlash because it requires something like technicians account
vivida said:
I tried changing it but it doesn't work. The problem is I can't flash anything on MiFlash because it requires something like technicians account
Click to expand...
Click to collapse
before miflash firstly you must connect your phone with pc or laptop