Related
Hello community.
I'am having too many issues with muy OnePlus 2 (A2005).
On oxygenos doesn't work sensors (gyro,accel,proximity) and after a time lf use touch became unusable
On hydrogen OS doesn't work fingerprint unlock (lets me add fingerprint but cant unlock) anyway this os doesn't like me.
Actually i install cm13 and im having same issues than oxygen , touch sometimes became unusable (for some seconds) , sensors doesn't works , camera open but i cant see anything , gyroscope doesn't works.
If its possible, i want to stay con cm13
Sorry for my english and thank you so much.
Regards from Argentina
Flash latest OOS 3.1 using the Qualcomm tool, that should restore the persistent partition needed to get the sensors running again and maybe fix the fingerprint reader unless yours is broken hardware wise like many others.
Regards from Sweden
pitrus- said:
Flash latest OOS 3.1 using the Qualcomm tool, that should restore the persistent partition needed to get the sensors running again and maybe fix the fingerprint reader unless yours is broken hardware wise like many others.
Regards from Sweden
Click to expand...
Click to collapse
Which tool? QFIL?
Use the search function young Skywalker.
Pride, thank you so much for the answer. I install SkyDragon and all works perfectly except touch, firsts moments it works fine, but after a few minutes it comes to have issues half (and more) of the taps cannot be readed. I think your answer gonna be usefull for that too. Im going to try, maybe it's because my device was hardbricked and i restore it. Gonna try your method, any specific name of the tool? there's a few of tools by qualcomm. Anyway, im going to keep searching. Thanks again
PD: Curiously, touch works good in Hydrogen.
Okey , if i do the process for hardbrick and install Oxygen 2.x the touch works great. The problem is when im doing upgrade to android 6, because i need to install a patch https://www.androidfilehost.com/?fid=24421527759880815 . otherway , it doesn't let me upgrade. After that patch comes the issue. For the moment, im going to keep on 2.x and install OTA.
EDIT: Upgrade OTA and keep having the same issue.
Edit2: after updating ota i installed google now launcher and works okey. I think the problema is with OnePlus Launcher
Hi there, as can you see here https://forum.xda-developers.com/p8lite/development/xepeleato-s-lineageos-14-1-t3542120, from @XePeleato, he did a LineageOS ROM for P8 lite but he want to help us too, so read the post slowly and if you want to test it, go ahead
In Which phones works?
Che2-L03,Che2-L11, Che2-L12, Che2-L23, Che2-UL00, Che2-TL00, G735-L03, G735-L23
Downloads (Always thanks to Xepeleato for helping us, Really)
Experimental Build 1: http://hisiliconroms.pw:8080/4x-1.zip (it doesn't boot)
Experimental Build 2: http://hisiliconroms.pw:8080/4x-2.zip
Installation Instructions (PD: it is hard)
First of all, you need or XePeleato TWRP for P8 lite here http://error404software.com/android/recovery.zip, or TWRP 3.1.0.0 (custom) from Roman Horulsky here https://mega.nz/#!FxwWjJxA!KrLvc85QD9w97ECX3kNRHM5LLWdGLVQix524JnPk5Og
Go here and get the appflasher https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
On http://hwmt.ru/oth/HWFF/info/view.php?find_model=ale-l21 download any rom that is says FULL, and add it to appflasher with the instructions in the post above
On TWRP Mount everything and install the P8 lite ROM (install ZIP)
Then on TWRP. reboot on Bootloader and Install TWRP again
On TWRP, go to Wipe, but before anything, FORMAT DATA (NO WIPE), why would you say? because when you install a p8 lite rom the phone encryptis itself and you can't use/wipe data, and emui data IT IS NOT COMPATIBLE with LineageOS Data
Wipe Cache, Dalvik, Data, Internal and System
Then install the zip posted above
Bugs ATM
Doesn't work:
No RIL on Single SIM Phones (on Double Sims RIL Works)
No Sound
No Bt
It seems it detects the sd card (you can enter to install things and everything, but only from the notification), in short words it isn't visible in media apps
When i connect the headphones the phone doesn't detect it
Record and see videos (.mp4 files)
Can't confirm, but maybe OTG (all of us the testers don't use it)
What works
Wifi (perfectly)
Camera
it seems GPS works
Install apps from explorer
Play store (it shows all the apps)
Dev Options
No problems with root (it needs to be flashed)
Many thins more
You maybe are wondering, why it doesn't boot on G Play/4X, or it has some sort of Wifi Bugs on G Play Mini/4C? because the net card, P8 lite (and probably 4C too but with different model) have a Siliscon Net card, and we 4X users have a Broadcom Netcard, so the romitself it is trying to load a module for a hardware that we don't have, so it doesn't boot
I did this post here, so we don't inundate the P8 Lite topic
if you have questions about this, it is your time to ask! (and if you are a dev, your help is appreciated)
EDIT: first experimental builds are up, see the 3rd page on comments (added pics)
Alright, so later on I'll build a special zip with a compatible kernel. This is going.to be the workflow.
1) You are interested and send me a PM
2) I send you the zip
3) You answer with your device model and whatever you think it's important like:'wifi didn't work, here's a logcat when I try to enable it's
4) I send another zip...
Sent from my FRD-L04 using Tapatalk
@XePeleato Thanks man! anyways so we don't spam your messages, it is better to comment here when you have the build done? or in any time
panchovix said:
@XePeleato Thanks man! anyways so we don't spam your messages, it is better to comment here when you have the build done? or in any time
Click to expand...
Click to collapse
You can comment whenever you want, if you want to post here instead of sending a PM that's fine!
Sent from my FRD-L04 using Tapatalk
I see! well, then as myself, i want to test it when it is avaible haha
@MarcoPLs @Zizo17 if you want a chance, go here lol
Downloading it right now !!
Hope that everything go alright
@Zizo17 XePeleato did send you the rom already? or are you downloading the p8 lite one
panchovix said:
@Zizo17 XePeleato did send you the rom already? or are you downloading the p8 lite one
Click to expand...
Click to collapse
Till now he doesn't , iam downloading p8lite version
IT'S NOT POSSIBLE TO FLASH ON CHE2-L11
I have followed all the instructions (slow method), but flashing is not possible on my Huawei Honor 4x Che2-L11. It stops in the flashing process.
When doing adb sideload, it fails with the error message:
Code:
"E:unknown command [log]
Updater process ended with ERROR: 7"
(this is error message in TWRP, not on laptop)
I have never succeeded in installing CM before, so not surprising that I can't install LineageOS. Nobody has taken care of Che2-L11 so it's total uncertain situation while some claim it works but don't show how. I have followed all the advice, tried all the different TWRP versions, but it always got stuck on "patching system image unconditionally" (with CM 12.1 - P8Lite version). Probably reason might be that they are not wiping everything, but keep some partition but forget to tell me about it. I wipe everything.
We need some common effort to make Che2-L11 versions, work together. I can do my part if we cooperate.
Bob1900 said:
IT'S NOT POSSIBLE TO FLASH ON CHE2-L11
I have followed all the instructions (slow method), but flashing is not possible on my Huawei Honor 4x Che2-L11. It stops in the flashing process.
When doing adb sideload, it fails with the error message:
Code:
"E:unknown command [log]
Updater process ended with ERROR: 7"
(this is error message in TWRP, not on laptop)
I have never succeeded in installing CM before, so not surprising that I can't install LineageOS. Nobody has taken care of Che2-L11 so it's total uncertain situation while some claim it works but don't show how. I have followed all the advice, tried all the different TWRP versions, but it always got stuck on "patching system image unconditionally" (with CM 12.1 - P8Lite version). Probably reason might be that they are not wiping everything, but keep some partition but forget to tell me about it. I wipe everything.
We need some common effort to make Che2-L11 versions, work together. I can do my part if we cooperate.
Click to expand...
Click to collapse
As I said, this is a discussion and not the ROM itself, the ROM for 4X isn't available yet, anyways I put these instructions so you can test it, and your error isn't normal
If you want to try, get the boot.img and flash it, the phone won't boot
I made this discussion for people that are interested on lineage OS and want to try the experimental ROM that will be here soon
And it is weird that cm12.1 failed to you too, me with other users already installed other roms, like this one or cm12.1 and it flashed well
All from us for Honor 4X Che understand your frustration too, since even the other devs here of the 4X (che1) ignore us, but at least now someone want to help us,so we need to support him
And yes it is sad that even a dev from other phone is helping us, the only dev we had sold his phone
Thank you for the answer. Can you tell me what you wiped before flashing the CM 12.1? How did you perform the wipe? With format? I think there must be something remaining when you flash CM 12.1, which I am wiping.
Maybe I am flashing the wrong rom. I don't know that there exists any rom of CM for Che2-L11. The one I am flashing, I had to change the update-script to remove first line. Where is the CM12.1 for Che2-L11? I don't think any exists.
I fully understand the situation with lack of devs. I think it can be improved with some better documentation, for example we can make a separate thread here.
Bob1900 said:
Thank you for the answer. Can you tell me what you wiped before flashing the CM 12.1? How did you perform the wipe? With format? I think there must be something remaining when you flash CM 12.1, which I am wiping.
Maybe I am flashing the wrong rom. I don't know that there exists any rom of CM for Che2-L11. The one I am flashing, I had to change the update-script to remove first line. Where is the CM12.1 for Che2-L11? I don't think any exists.
I fully understand the situation with lack of devs. I think it can be improved with some better documentation, for example we can make a separate thread here.
Click to expand...
Click to collapse
When I install custom Roms, first I install any p8 lite ROM (emui) then flash it, and then I have no problems
Sent from my Che2-UL00
So I should download the rom zip from p8lite thread and pm XePeleato for a compatible kernel for it to boot? Sorry but there's too many instruction. I can't follow btw I'm on b515. Should I use a p8lite rom for it to work?
@ericotena for now he want to test that we users with 4x, all of them doesn't work to see rare things, for example an 4X working
i mean yes download atleast the zip now, and try with those steps, personally i tested using 4X and @MarcoPLs with P8 lite rom, and we made it to test
Xepeleato said it is enought that if you quote him in 1 comment, so he will pm you then with a rom
@XePeleato I want to test it too when it is available haha. Thanks for your efforts on this rom!!!!
@XePeleato I really appreciate your great job and I wish you can help us , our poor Huawei honor 4x users :laugh:
Don't worry, I couldn't PM you yesterday because the build didn't finish (nothing I can do about it). As far as I know, the ROM has to be compatible with Che2-L11, but if there's other more 'compatible' model I'd like to know it, like the ALE-L21 for the P8 lite.
Sent from my FRD-L04 using Tapatalk
XePeleato said:
Don't worry, I couldn't PM you yesterday because the build didn't finish (nothing I can do about it). As far as I know, the ROM has to be compatible with Che2-L11, but if there's other more 'compatible' model I'd like to know it, like the ALE-L21 for the P8 lite.
Click to expand...
Click to collapse
You mean that's the 22/1/2017 realse must be compitable with my model of 4x , if this I can try it , and give you a feedbacj
Zizo17 said:
You mean that's the 22/1/2017 realse must be compitable with my model of 4x , if this I can try it , and give you a feedbacj
Click to expand...
Click to collapse
No, it isn't uploaded yet, but I will upload it as soon as I can
Sent from my FRD-L04 using Tapatalk
XePeleato said:
No, it isn't uploaded yet, but I will upload it as soon as I can
Click to expand...
Click to collapse
Ok .. take your time
You're doing great job my friend
Thanks
Bought a cheap Chinese smartwatch over the Internet, seemed a Y1 but now I think it's a fake.
Used code *#8375# to get some info, which look as follows:
[VERSION]: K13-COB-Y1- IPS7789BOE-BDYD-ZH-V06.563- 20180507 [BRANCH]: 11CUMEOX_61D_BT_11C
I think it has the Mediatek MTK6261D chip.
The pedometer seems fake as well and counts 7 steps every 7 seconds. The screen waking gesture doesn't work.
Inserted a 16G spare microSD card I had, and confirmed the watch is able to read it.
Tried to install some other watch face with the Mediatek SmartDevice Android app. The app recognizes the watch as a Y1 but I can't install any watch face.
Any help available? Thanks
debernardis said:
Bought a cheap Chinese smartwatch over the Internet, seemed a Y1 but now I think it's a fake.
Used code *#8375# to get some info, which look as follows:
[VERSION]: K13-COB-Y1- IPS7789BOE-BDYD-ZH-V06.563- 20180507 [BRANCH]: 11CUMEOX_61D_BT_11C
I think it has the Mediatek MTK6261D chip.
The pedometer seems fake as well and counts 7 steps every 7 seconds. The screen waking gesture doesn't work.
Inserted a 16G spare microSD card I had, and confirmed the watch is able to read it.
Tried to install some other watch face with the Mediatek SmartDevice Android app. The app recognizes the watch as a Y1 but I can't install any watch face.
Any help available? Thanks
Click to expand...
Click to collapse
Can you upload FULL_FLASH Backup please?
I have to get comfortable before with all these tools to download and upload watch firmwares, plus, I don't have a Windows computer (just virtualized Windows XP and Linux Mint on a MacBook).
I had this same question
[VERSION] K13-COB-Y1-IPS7789HSD-QCY-KS-V.1429-20180522[BRANCH]:11CUMEOX61D_BT_11CBUILD:_NO SERIAL#:[BUILD TIME]2018/05/22 12:25[MRE VERSION]3100HAL_VERNO:
Thank you.
If everything goes well, I receive a Y1 watch today.
Is it difficult to make a backup of the firmware?
Cause if it is not too difficult, I would try to make it and share the rom with you. It would be nice to install additional faces to this watch.
OK I got
1) FlashTool_v5.1516.00
2) mtk drivers v1.1032.1
3) Readback Extractor mtk 2.4
I'll try to run them on a XP virtualbox istance in my Mac.
Could anybody please point me to a guide to backup the original firmware, so that I can upload it here?
Thanks.
debernardis said:
OK I got
1) FlashTool_v5.1516.00
2) mtk drivers v1.1032.1
3) Readback Extractor mtk 2.4
I'll try to run them on a XP virtualbox istance in my Mac.
Could anybody please point me to a guide to backup the original firmware, so that I can upload it here?
Thanks.
Click to expand...
Click to collapse
Her comes your Download:
Flashtools and Flash Guide inside
https://drive.google.com/open?id=1xd3HyHitBzW0x1fufchU5aFkAoY9slV4
any update yet on y1 smartwatch?
i need assistance too to install watch face on y1, some one or some guide specifically for this watch?
hi there is a pc software call "smart china res", this can change your watch face easily,but i guess is paid software.need to google it.
Hello board... first time poster but LONG TIME user. This board has helped me for years with my last 4-5 smartphones and several tablets... The least I can do is pay back. I went to the other "round" site with my issue, due to the fact that I could find an answer here. To be honest..... I wasn't real pleased with the moderator's tone and responses to me... when I was simply trying to help others. So here I am after erasing all this info at the other site...ha!
So I was playing around with my Zeblaze Thor Pro 3g and trying to flash different firmware. I actually bricked my watch flashing it as a Thor S and had to wait 4 days for the battery to run out to re-flash it again. I searched and searched and searched for the stock rom... to no avail. I reached out to Zeblaze directly and after a few days got results.... YES!!!
Ok now so I've had success installing the original Thor Pro 3G rom.... yes!
It is easy to do using SP Flash Tool and following the PowerPoint Instructions.
Dropbox folder with all Zeblaze Pro 3G files:
www.dropbox.com/sh/iz6lcrgewwcorhp/AABGV6ii6PM66KmspateRXgva?dl=0
Here you will find:
* PowerPoint with Instruction on flashing
* Drivers for Windows
* SP Flash Tool Version v5.1652
* Stock Zeblaze Pro 3G ZIP file (with scatter file)
I have flashed it now, it is working great and this is what my watch says:
Model Number: Thor Pro
Android Version: 5.1
Kernel Version: 3.10.72 Sat May 12 12:55:06
Build Number: XY_C5_X300_KY16_V1.4_20180512
On another note: I have turned off auto wrist wake up, wifi and the Play Store auto update. I am using Wiiwatch and BT calling. I am now getting great battery life. It has been over 30 hours and I am still at 69%. I haven't spent much time on it though... mainly checking time and messages.
BEST OF LUCK EVERYONE!
#2
See below
#3
See below
Dropbox folder with all Zeblaze Pro 3G files:
www.dropbox.com/sh/iz6lcrgewwcorhp/AABGV6ii6PM66KmspateRXgva?dl=0
Here you will find:
* PowerPoint with Instruction on flashing
* Drivers for Windows
* SP Flash Tool Version v5.1652
* Stock Zeblaze Pro 3G ZIP file (with scatter file)
I have flashed it and this is what my watch says:
Model Number: Thor Pro
Android Version: 5.1
Kernel Version: 3.10.72 Sat May 12 12:55:06
Build Number: XY_C5_X300_KY16_V1.4_20180512
BEST OF LUCK EVERYONE!
sidjones1 said:
See below
Click to expand...
Click to collapse
PM the link and i will post here for you.
Thanks Beackman... it think I may have let me after 24hours. Here is the link:
www.dropbox.com/sh/iz6lcrgewwcorhp/AABGV6ii6PM66KmspateRXgva?dl=0
sidjones1 said:
Thanks Beackman... it think I may have let me after 24hours. Here is the link:
www.dropbox.com/sh/iz6lcrgewwcorhp/AABGV6ii6PM66KmspateRXgva?dl=0
Click to expand...
Click to collapse
Great man.... and thx for helping people here.
Do you guys manage to sync gmail with this watch independently? it always forced closed using sync function on the current firmware
Is This for THOR S ?? Does´n work on my Thor Pro..
jebbs said:
Is This for THOR S ?? Does´n work on my Thor Pro..
Click to expand...
Click to collapse
Jebbs, This is for the Zeblaze Thor Pro....... not the S version.
What did not work? Did you follow the instructions in the Powerpoint exactly?
Did you make sure your watch was turned off prior to plugging it in to your PC?
It worked fine on mine...
sidjones1 said:
Jebbs, This is for the Zeblaze Thor Pro....... not the S version.
What did not work? Did you follow the instructions in the Powerpoint exactly?
Did you make sure your watch was turned off prior to plugging it in to your PC?
It worked fine on mine...
Click to expand...
Click to collapse
Hello..
Yep, doesn't work. The display still in a real black darkness. I think that, the problem is on the "video" configuration, because the smartwatch started, but withou any image in the display. Thats the problem..
Hmmm... that is weird. I had bricked mine with a black screen too. I was trying to flash a Thor S on my Thor Pro.... didn't work. It acted just like yours. I could connect it to my PC and it would show up, just had a black screen. I figured it must be because the Thor s wasn't compatible with my Thor Pro. I had to wait 4 days for the battery to run completely down to re-flash with the one I provided above. Like I said, it worked fine for me but I had to wait 4 days until the battery completely ran down. I would check it each day by holding down both buttons and feeling a vibration. If I felt the vibration, I knew it still had battery life in it and was still "on". I even tried to remove the back to disable the battery to no avail. Just wait a few days and try it again after the battery goes dead.
In my Dropbox there are the windows drivers, the SP flash tool (version v5.1652), the instruction PowerPoint and the ZIP file. I just realized that when I did mine, used the SP flash tool version v5.1744. I wonder if that would make a difference for you. I uploaded a newer version of the SP Flash Tool V5.1744 to the same link above. Just in case you want to try that one too. Hope this helps
you dont need to wait for battery just opened the watch,its easy just carefull,you maybe install something wrong,i did have too black with a grey in the middle, your PC recognize the watch,if it is ok you are good to go, get the stock firmware V1.4, its weird,it says the thor S,but is the one,use SP flash tool,format and download everything again and see what happen. good luck,you can even use the TWRP recovery,expanse for the OpenWatch project for the thor pro,go and read it.
Hey their... In my watch,the language turns chinese in the default keyboard after sometime...initially its english but I think the default keyboard shows stuff in english but the suggestion panel is in chinese...besides this on gboard, the enter button is hidden in the watch curve so can't be pressed...which other keyboard could be used???help!!!
Here is the photo of the same...
Here is the pic for help..
[email protected] said:
Hey their... In my watch,the language turns chinese in the default keyboard after sometime...initially its english but I think the default keyboard shows stuff in english but the suggestion panel is in chinese...besides this on gboard, the enter button is hidden in the watch curve so can't be pressed...which other keyboard could be used???help!!!
Click to expand...
Click to collapse
Hold in your top button for a few secs.... you will get a screen that says power off-reboot-power save-recent task. look above that line and you will see your watch (probably says full- screen). Tap that and it will change to a squared screen. Then you can access the full screen in squared mode. Just hit the button on the keyboard for non Chinese (CN/EN). Good luck!
Thanks maaaan....that helped alot...btw..how to use gboard???
Where to find latest FW for this watch?
Also, is it good for running?
Hello, everyone! I'm about to buy the zeblaze thor 4 pro. I'm reading in a site that BT calling is not supported in android 7.0 smartwatces. So my question is, is it true? Have anybody here this model and is using BT calling? (My phone have android 6.0)
Hi,
a week ago I bought the following MK809IV TV stick and I bricked it without making a backup.
I need your help to find the right firmware for it.
External packaging is labeled MK809IV with a red slider.
Board version: H122V1.4 0422 without a NAND chip.
Label on the back: RK29_809_V1.0 221 # - HXB_19060601
Processor: RK3229
Board: rk30board
GPU: Mali 400 MP
RAM: 2Gb
ROM: 8Gb
WiFi: RTL8723bs
Original firmware was based on:
Version: Android 7.1.2
Build: hx322x_box-userdebug...
kernel version: 3.10.104
I tried to flash dozens of firmware, and the only one that actually works is:
rk3229_7.1_box_MX4VB_SSV6051p_SpecTek_flash-update_20171209
but it shows only 1Gb of RAM and does not have the WiFi.
Any help is appreciated!
Thanks and regards.
Ok guys, finally I found a working solution for this TV Stick.
Let me share my solution:
Basically, as mentioned in the first post, I found a working firmware with no wifi and just 1Gb of ram: rk3229_7.1_box_MX4VB_SSV6051p_SpecTek_flash-update_20171209
So I continued to search for a different firmware and I found this one:
G809_3229_L_2G_8723_20180517_1451_2018070601
Unfortunately also this last one is not able to boot, but what I though is why don't try to flash this last firmware anyway and using the bootloader from the previous one?!!
So I have extracted the Loader, uboot and trust images from the first one (rk3229_7.1_box_MX4VB_SSV6051p_SpecTek_flash-update_20171209) and flashed over the already flashed second one (G809_3229_L_2G_8723_20180517_1451_2018070601) using RK_Android_Tool v.2.3.9.
Steps are:
1. Flash G809_3229_L_2G_8723_20180517_1451_2018070601 image using BatchTool and selecting "Restore".
2. Make a short with a paper clip to the pins 6-7 and plut the USB in the OTG port
3. Load the Working images: Loader, uboot, trust and parameter files to RK_Android_Tool v.2.3.9
4. Start the flashing
First boot required about 10 minutes.
The archive includes all the needed software for flashing, the firmware and the extracted working images for the bootloader.
Hope it can help others!
Enjoy!
Download link: https://drive.google.com/open?id=1rLtdJlHnHmrie0goBUlD5LAqCi5Dvfrw
MK809IV
Hi, I have the same device and I want to ask, shorting 6-7. What do you mean. Where and how to find these pins. How do I start flashing. I can ask you for a more detailed procedure. well thank you. when i held the reset button and connected via usb to pc so nothing happened. Thank you.
wow and cheers Found my "piece of crap^^" in a cupboard and just recognized, that google-login not been working anymore - so i decided to look for some "updates" .... theres really not only one ROM for it after 1 day of searching :/ ... tried out ARMBIAN - only 1GB ram recognized and only 1,2Ghz and nice to see Linux on it but Wifi too unstable and even with ethernet hard to use .... tried out Librelec - most plugins not working here in germany ... last but not least i tried out your courious method - and it works ... but had an 7.1 preinstalled and now dowgraded ... but working
Isn't it possible to match that two parts together in one ROM ? and maybe with a newer Kernel ?
If somebody finds a other working ROM for a RK3229 MK809IV 2+8 pls post here :/ - i'll have a look in some years again i guess
Nearly 4 years passed i'm still the only one, who has to thank you very much dear Goolpone ?!
K - n good morning^^ ... spent my night by seeing Programs not really loading and crashing ... rejoiced too early :/ Seeker (Soulssek client for Android) seems to be the only usefully working App :/ .. and the laggiest lags i've ever seen on a computing device the whole night long .... reflashing ARMBIAN now as the final state of my poor stick ... you can nicely watch the lags in system monitor graphs there and afterall it's not too bad .... but only for museum purposes^^ anyways regards to everyone stomping over here
... maybe last comment - Telegram working nice at ARMBIAN ... at least you can read your papers with it ... anyways armbian seems to be the only usefull thing you can do with that poor device ...