Has anyone recieved the security update for June?
No still on May myself
Go into firmware finder and there is three or four june updates, but not for the FIG-LX1
What is the firmware number you are on?
I'm on 8.0.0.142, i do see 143-146 in firmware finder for my phone.
But I can't seem to update, both dns or proxy method are failing.
Does anyone know the prerequisites to update? I'm running on stock recovery, stock rom, unlocked bootloader, root by Magisk.
I am on 131 as had issues with the phone in softbrick/bootloop and eventually got it going again with this version
I find it VERY hard to work out what version to use or not
I am afraid to mess too much as it is not as simple as the G7 I had, flash custom rom or forced back to stock with 3 buttons
I see updates in firmware finder but check if for phone and if not I wait, better to have working phone than try and force latest update
I know this thread is old, but someone can install the "gpu turbo" update ? I only have the security patch of august. If someone know any thing pls tell me
I use hurupdater and i have september firmware..
I tried to force update with hurupdater and ended up with no update option in menu and some missing apps, so again I would not recommend it
Erecovery is great if anything goes wrong, soon after I done it I got an update to 134, Aug patches so a month behind
redultra82 said:
I tried to force update with hurupdater and ended up with no update option in menu and some missing apps, so again I would not recommend it
Erecovery is great if anything goes wrong, soon after I done it I got an update to 134, Aug patches so a month behind
Click to expand...
Click to collapse
No problem here!
leap_ahead said:
No problem here!
Click to expand...
Click to collapse
So you force update and don't lose apps or update option in menu?
redultra82 said:
I tried to force update with hurupdater and ended up with no update option in menu and some missing apps, so again I would not recommend it
Erecovery is great if anything goes wrong, soon after I done it I got an update to 134, Aug patches so a month behind
Click to expand...
Click to collapse
I think you flash wrong firmware, i update from 134 to 135,135 to 136 and all ok! C02
leap_ahead said:
I think you flash wrong firmware, i update from 134 to 135,135 to 136 and all ok! C02
Click to expand...
Click to collapse
I use firmware finder and check if OK for this firmware
I find it very hard to pick the right firmware myself
redultra82 said:
So you force update and don't lose apps or update option in menu?
Click to expand...
Click to collapse
Nothing wrong!
---------- Post added at 06:25 PM ---------- Previous post was at 06:24 PM ----------
redultra82 said:
I use firmware finder and check if OK for this firmware
I find it very hard to pick the right firmware myself
Click to expand...
Click to collapse
U must uae the correct for your model, mine is Fig-lx1 L11 C02
Followel this instruction, without format Data
https://forum.xda-developers.com/showpost.php?p=77418076&postcount=78
https://forum.xda-developers.com/mate-10/how-to/beware-bla-l29c432b147-t3817241
be carefull with xloader2 to 1
leap_ahead said:
Nothing wrong!
---------- Post added at 06:25 PM ---------- Previous post was at 06:24 PM ----------
U must uae the correct for your model, mine is Fig-lx1 L11 C02
Followel this instruction, without format Data
https://forum.xda-developers.com/showpost.php?p=77418076&postcount=78
Click to expand...
Click to collapse
When I check latest is 134 and that is what I have, Vodafone Ireland phone
Related
New build certified on 27 October 2011 for LT15i.
http://www.ptcrb.com/vendor/complete/view_complete_request_guest.cfm?modelid=18648
Any guesses as to when it will be pushed out via OTA or SEUS?
pandaball said:
New build certified on 27 October 2011 for LT15i.
http://www.ptcrb.com/vendor/complete/view_complete_request_guest.cfm?modelid=18648
Any guesses as to when it will be pushed out via OTA or SEUS?
Click to expand...
Click to collapse
Hopefully it comes with different radio that fixes the existing cell coverage issue! It's getting worse and worse day by day.
I still see no update from my rooted *.283 (up from *.181 world generic) to *.42, not to mention to *.58
@aero125,
Why don't you just flash the .ftf and get the latest update? Moreover, we now have the ZergRush method for rooting.
aero125 said:
I still see no update from my rooted *.283 (up from *.181 world generic) to *.42, not to mention to *.58
Click to expand...
Click to collapse
Weird, my Singapore Generic version of .283 asked me to update via SEUS to .42 when I checked using my phone. What version are you using?
Please wait, I think SE Arc new firmware will have something new.
aero125 said:
I still see no update from my rooted *.283 (up from *.181 world generic) to *.42, not to mention to *.58
Click to expand...
Click to collapse
It has only been certified and hasn't been released.
pandaball said:
Weird, my Singapore Generic version of .283 asked me to update via SEUS to .42 when I checked using my phone. What version are you using?
Click to expand...
Click to collapse
Singapore didn't have .283 version after all. We jumped from .145 to .42 directly .
prathaban said:
Singapore didn't have .283 version after all. We jumped from .145 to .42 directly .
Click to expand...
Click to collapse
Oops, I should have said .145
I finally got an update message for OTA to *.42 yesterday night (9Nov). I downloaded the firmware and followed the whole installation process but failed repeatedly to install the update for some strange unknown reasons on my rooted *.283 (World Generic). I tried disabling 3rd party password delay and QQ phone mgr apk but still no luck.
Given up, I finally proceeded to backup all data and flashed the *.42 ftf plus re-rooting using flashtool 0.4.2. This was a more troublesome process as some settings and apks gotten haywire after restoring from titanium backup. But i got my *.42
I'm still wondering why can't the rooted *.283 OTA to *.42 directly. Anyone kind enough to advise if i have missed anything during the OTA process ?
---------- Post added at 05:06 PM ---------- Previous post was at 04:56 PM ----------
pandaball said:
Weird, my Singapore Generic version of .283 asked me to update via SEUS to .42 when I checked using my phone. What version are you using?
Click to expand...
Click to collapse
*.283 world generic, I got the update message finally on 9 Nov. Did u succeed in OTA to *.42 ? I failed repeatedly for unknown reasons ...
aero125 said:
I finally got an update message for OTA to *.42 yesterday night (9Nov). I downloaded the firmware and followed the whole installation process but failed repeatedly to install the update for some strange unknown reasons on my rooted *.283 (World Generic). I tried disabling 3rd party password delay and QQ phone mgr apk but still no luck.
Given up, I finally proceeded to backup all data and flashed the *.42 ftf plus re-rooting using flashtool 0.4.2. This was a more troublesome process as some settings and apks gotten haywire after restoring from titanium backup. But i got my *.42
I'm still wondering why can't the rooted *.283 OTA to *.42 directly. Anyone kind enough to advise if i have missed anything during the OTA process ?
---------- Post added at 05:06 PM ---------- Previous post was at 04:56 PM ----------
*.283 world generic, I got the update message finally on 9 Nov. Did u succeed in OTA to *.42 ? I failed repeatedly for unknown reasons ...
Click to expand...
Click to collapse
that happened to me aswell i just had to put the stock framework-res.apk and SystemUI.apk back and OTA worked
tatit1011 said:
that happened to me aswell i just had to put the stock framework-res.apk and SystemUI.apk back and OTA worked
Click to expand...
Click to collapse
I have got the same problem, can you kindly post your stock framework-res.apk and SystemUI.apk and describe the procedure you follow to replace them and update via OTA???
Thanks a lot!!
aero125 said:
I'm still wondering why can't the rooted *.283 OTA to *.42 directly. Anyone kind enough to advise if i have missed anything during the OTA process ?
Click to expand...
Click to collapse
If youve modded anything or changed anything then the OTA update will fail. I had a modded dock and had the panorama beta installed and mine failed. Even after restoring the original Home.apk and removing panorama (oh, and appwidgetpicker) it still wouldnt work (guess i must have missed something).
You should still be able to update via SEUS (though it will probably want to repair the phone first). When i did this i was expecting everything to be wiped but surprisingly it left all my apps installed.
Updating via SEUS will leave all your apps and data intact, unless it wants to repair your phone in which case everything will be erased.
Thank u all for the advise, but i'm still kind of confused.
I only rooted the Arc, the bootloader was still locked, and i have made no changes to the *.283 framework-res.apk and sytemUI.apk, meaning both these files were original stocks. So I'm not sure what restoring these 2 files exactly means
I was using Go launcher Ex instead of the SE stock launcher, so has it got anything to do with the *.283 framework-res.apk and sytemUI.apk being changed unknowingly to me ?
I hope to clarify this OTA issue otherwise i would have to go thru the more tedious process again to update the *.42 later on.
---------- Post added at 02:30 PM ---------- Previous post was at 02:18 PM ----------
pandaball said:
Updating via SEUS will leave all your apps and data intact, unless it wants to repair your phone in which case everything will be erased.
Click to expand...
Click to collapse
Is SEUS the same as OTA ? I did the failed *.283 to *.42 update from the "phone setting-about phone-software update" , which i took it as OTA (over the air) and which will retain the root. I updated in the past once via the PC companion but lost the root.
for you guys worried with .42 root access loss, .42 can be easily rooted back anyways with the new flashtool so even if OTA from .283 fails, just use SEUS or even flash a .42 FTF directly, then root.
cryogenix said:
for you guys worried with .42 root access loss, .42 can be easily rooted back anyways with the new flashtool so even if OTA from .283 fails, just use SEUS or even flash a .42 FTF directly, then root.
Click to expand...
Click to collapse
Got it, Thk u.
I was still using the earlier 0.3 flashtool method which requires going back to *.181/184 to gain root before OTA up again to update. Yes, I just found that the 0.4 flashtool can install root directly. Development from XDA is really fast. Stupid Me
Hi ,
I have the HK 4.0.A.2.368 (rooted) , I have checked today and I got the message that there is an update: 4.0.2.A.0.42 , but cannot update OTA and wants me to use PC Companion.
I understand that in this case I will lose root. How can I root the .42 ? Do you have a link for the new flashtool ?
Thanks
refer this:
http://forum.xda-developers.com/showthread.php?t=1320350
I cant update neither. And i dont want to backup all my things, help pls
So..i buy for my wife brand new Samsung galaxy tab 2 10" and after 2 weeks of use problems shows up
1. my home button stop working ...i said i can leave with that i tap more often back back button !
2. my lock screen disappear .... when i press power button my last page comes up ....i restart 2-3 times nothing ....i check if lock-screen it's enable and the slide option it's on.
i have the stock ICS 4.0.4 i didn't do any upgrade or something similar.
i see a loot of peoples talk about JB 4.2.2 why my tablet don't find any updates ?
i read about update to some rom....but there so many things to do : new soft like odin, superuser, su, clock ...etc i'am afraid not to damage the device..but most off all my wife will kill me !
and the big question it's can i do something to fix it?
It's 2 weeks old man, take it back under warranty
Sent from my GT-I9505 using Tapatalk 4
MAdbUSU said:
So..i buy for my wife brand new Samsung galaxy tab 2 10" and after 2 weeks of use problems shows up
1. my home button stop working ...i said i can leave with that i tap more often back back button !
2. my lock screen disappear .... when i press power button my last page comes up ....i restart 2-3 times nothing ....i check if lock-screen it's enable and the slide option it's on.
i have the stock ICS 4.0.4 i didn't do any upgrade or something similar.
i see a loot of peoples talk about JB 4.2.2 why my tablet don't find any updates ?
i read about update to some rom....but there so many things to do : new soft like odin, superuser, su, clock ...etc i'am afraid not to damage the device..but most off all my wife will kill me !
and the big question it's can i do something to fix it?
Click to expand...
Click to collapse
It seems that your device's firmware has bugs so try to update it to official 4.1.2 , it will solve your problem and also note that there is no official 4.2.2 fw released or leaked for 51xx
openmatrix said:
It seems that your device's firmware has bugs so try to update it to official 4.1.2 , it will solve your problem and also note that there is no official 4.2.2 fw released or leaked for 51xx
Click to expand...
Click to collapse
can i make update to 4.1.2 official stock realese without losing warranty?
MAdbUSU said:
can i make update to 4.1.2 official stock realese without losing warranty?
Click to expand...
Click to collapse
Surely(if your device has an update in your region or country),update through OTA in update options found in settings--->about device---->software update or otherwise download a rom from sammobile and flash through Odin
---------- Post added at 11:04 PM ---------- Previous post was at 11:03 PM ----------
MAdbUSU said:
can i make update to 4.1.2 official stock realese without losing warranty?
Click to expand...
Click to collapse
Surely(if your device has an update in your region or country),update through OTA in update options found in settings--->about device---->software update or otherwise download a rom from sammobile and flash through Odin
openmatrix said:
Surely(if your device has an update in your region or country),update through OTA in update options found in settings--->about device---->software update or otherwise download a rom from sammobile and flash through Odin
---------- Post added at 11:04 PM ---------- Previous post was at 11:03 PM ----------
Surely(if your device has an update in your region or country),update through OTA in update options found in settings--->about device---->software update or otherwise download a rom from sammobile and flash through Odin
Click to expand...
Click to collapse
can u provide some link's
i wanna get last version for odin
and sammobile
?
can some1 translate this specially last line ?
Samsung Galaxy Tab 2 10.1
Model: GT-P5110
Android-version: 4.0.4
Kernelversion: 3.0.8-1060237, [email protected] #1, SMP PREEMPT Fri Aug 24 01:37:19 KST 2012
Click to expand...
Click to collapse
MAdbUSU said:
can u provide some link's
i wanna get last version for odin
and sammobile
?
Click to expand...
Click to collapse
Look here for the roms for your device
http://forum.xda-developers.com/showthread.php?t=2203309
And Go here for getting odin
http://forum.xda-developers.com/showthread.php?t=2189539
---------- Post added at 11:07 PM ---------- Previous post was at 10:58 PM ----------
MAdbUSU said:
can some1 translate this specially last line ?
Click to expand...
Click to collapse
The first line is saying your device is tab 2 10.1
second is explaining which variant your device is
Third is saying the android version which your device is running(it's ICS)
Amd the last line is saying about the kernal version,kernal build date , kernal build time etc...
which one?
so ...i go to sammobile and look for new firmware for my gt-p5110...the problem is there are like 7 country which one to use?
i will try to use kies after i solve my MTP driver problem !
No don't, there is a odin flash counter which if shows unofficial with flash count avoids your warranty
MrAndroid12 said:
No don't, there is a odin flash counter which if shows unofficial with flash count avoids your warranty
Click to expand...
Click to collapse
so i must stay on ics buggy 4.0.4 version?
MAdbUSU said:
so i must stay on ics buggy 4.0.4 version?
Click to expand...
Click to collapse
Just do a hard reset in settings. Backup and and recovery or something like tjat.
My tab was ok with ICS. But as told before have you tried to update via settings over the air?
rk73 said:
Just do a hard reset in settings. Backup and and recovery or something like tjat.
My tab was ok with ICS. But as told before have you tried to update via settings over the air?
Click to expand...
Click to collapse
Its not that... its the odin counter ****e
rk73 said:
Just do a hard reset in settings. Backup and and recovery or something like tjat.
My tab was ok with ICS. But as told before have you tried to update via settings over the air?
Click to expand...
Click to collapse
yes man ...that's was my 1st thing to do after i set up my google account to check for updates over air ....i still check every day still nothing yet.
i think i will do factory reset not before doing some backup.
You can use triangle away to wipe binary count on downloadmode a reclaim the warranty
Sent from my GT-P3100 using xda premium
Hi guys,
I was with 21.11.14 and many of You know that there is no update for this version yet. So what i did was simply update my phone to 21.11.23 and then Lollipop update was available.
This is tested on retEU, so i don't know if it will work on other versions!
If someone test with other versions (retin, retde, redgb) i will put the result here.
21.11.14.titan_retde.retdeall.en.DE retde - tested and not working
1. Download the update from here and save it to the internal phone memory
2. Delete everything in file name after ".zip"
3. Turn off your phone
4. Press Power button + Volume Down and hold it for 5 seconds
5. In the menu go to "Recovery" by pressing Volume Down
6. Press Volume up
7. When you see Android robot on the screen hold Volume Up for 5 seconds and then press Power button
8. Choose "apply update from sdcard" and choose the update
9. After the update check for the Lollipop update manually via Settings and if you still don't get it just update it manually with the same method or whatever method you want...
Thank you,
unfortunately with my German version and your instructions I wasn't able to update to 21.14.23
(21.11.14.titan_retde.retdeall.en.DE retde).
...so I guess Lollipop has to wait :crying:
untitled_tom said:
Thank you,
unfortunately with my German version and your instructions I wasn't able to update to 21.14.23
(21.11.14.titan_retde.retdeall.en.DE retde).
...so I guess Lollipop has to wait :crying:
Click to expand...
Click to collapse
Very sorry to hear that :/ What message do you get when you try to update?
Same problem in Finland version xt1068. Reteu 21.11.14. Il get to recovery and safe mode but cant install the update.
I got all stock (locked BL and no su).
Verifying update package...
Installing update...
Package expects build fingerprint of motorola/titan_retalidsds/titan_umtsds:4.4.4/KXB21.85-14/9:user/release-keys or motorola/titan_retaildsds/titan_umtsds:4.4.4/KXB21.85-23/19:user/release-keys; this device has motorola/titan_retde/titan_umtsds:4.4.4/KXB
Instalation aborted
Successful update on my xt1068 21.11.14 reteu (Italy)
the file ''delta-ota-Blur_Version.21.11.14-21.11.23.titan_retaildsds.retaildsdsall.en.03.zip.b31f6760-1d35-482b-b0d6-e59b673d049c'' doesn't show up in the recovery. My phone is not rooted, locked bootloader and stock recovery.
bokilz said:
the file ''delta-ota-Blur_Version.21.11.14-21.11.23.titan_retaildsds.retaildsdsall.en.03.zip.b31f6760-1d35-482b-b0d6-e59b673d049c'' doesn't show up in the recovery. My phone is not rooted, locked bootloader and stock recovery.
Click to expand...
Click to collapse
Youe have to delete everything in the file name after the ".zip" -> ''delta-ota-Blur_Version.21.11.14-21.11.23.titan_retaildsds.retaildsdsall.en.03.zip"
BTW, after rebooting I captured the OTA! :fingers-crossed: it's taking forever to download though... 318minutes to complete
I updated the first post to let people know that this metod it's not working with retde sadly...
stebenwulf said:
Same problem in Finland version xt1068. Reteu 21.11.14. Il get to recovery and safe mode but cant install the update.
I got all stock (locked BL and no su).
Click to expand...
Click to collapse
Did you delete everything in the file name after .zip?
Bonehead81 said:
Youe have to delete everything in the file name after the ".zip" -> ''delta-ota-Blur_Version.21.11.14-21.11.23.titan_retaildsds.retaildsdsall.en.03.zip"
BTW, after rebooting I captured the OTA! :fingers-crossed: it's taking forever to download though... 318minutes to complete
Click to expand...
Click to collapse
Thanks man it worked It's optimizing my apps right now after i rebooted it . :good:
I updated the post with this tip.
And i immediatly received a lollipop update after i flashed that ota ! Many thanks OP
untitled_tom said:
Thank you,
unfortunately with my German version and your instructions I wasn't able to update to 21.14.23
(21.11.14.titan_retde.retdeall.en.DE retde).
...so I guess Lollipop has to wait :crying:
Click to expand...
Click to collapse
if you have a XT1068 just use my firmware and installer in signature to convert to global 5.0.2 no OTA needed
---------- Post added at 08:28 PM ---------- Previous post was at 08:17 PM ----------
Sorry to say this way is much easier....
http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-5-0-2-lxb22-46-t3019612
reefuge said:
if you have a XT1068 just use my firmware and installer in signature to convert to global 5.0.2 no OTA needed
---------- Post added at 08:28 PM ---------- Previous post was at 08:17 PM ----------
Sorry to say this way is much easier....
http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-5-0-2-lxb22-46-t3019612
Click to expand...
Click to collapse
I don't know if I get it right. But does your firmware support future OTA updates?
untitled_tom said:
I don't know if I get it right. But does your firmware support future OTA updates?
Click to expand...
Click to collapse
yes its the firmware that is currently taking AGES to arrive OTA,
it's untouched stock motorola firmware
SO FUTURE OTA WILL WORK
just using fastboot to install without any fingerprint check
its only for xt1068 dual sim dual standby
and you will lose any regionalism and be converted to the Global firmware
WORKING ON
Retgb
Reteu
Retin
should work on Retde
DOES NOT work on Brazilian XT1068 ( due to modem difference)
thank u very much! im finally on lollipop hehe (reteu)
@Lenks
There was one . mark that I didn't remove =D
Now updating over 30 mins :S
it takes time
21.11.14.titan_retde.retdeall.en.DE retde - still not working even after deleting everything in the file name after ".zip" (I already done that from the beginning, but i've double checked).
However, Norwich's suggested firmware worked for me, so Thanx! :victory:
Unlike every other Android device i've had this one does not seem to update through OTA. At least not that i can seem to figure out. It is currently running Android 5.0.1 and from what i can read it should be able to get Android 6.0. But if i go to About and search for updates, nothing is found.
It seems that i need to download the update on my PC first somehow, and then transfer it to the phone.
Where can i find some official guide about this? And why isn't the update available over OTA when it seems like the phone should support OTA? Im asking because i cannot figure out if the reason for them not to do OTA, is because 6.0 for P8lite is in beta or something like that.
Furthermore if i look at huawei's own download tab on their support page for the P8lite, the Marshmellow update is not listed there.
http://consumer.huawei.com/my/mobile-phones/support/downloads/p8lite-my.htm
Hi there
Huawei didn't release ota for Huawei p8 lite however you can manually update (Stable one) it via sdcard in this process you may lose your data. Can you tell me in which country do you live and exact model of your phone?
Suleiman01 said:
Hi there
Huawei didn't release ota for Huawei p8 lite however you can manually update (Stable one) it via sdcard in this process you may lose your data. Can you tell me in which country do you live and exact model of your phone?
Click to expand...
Click to collapse
Denmark and the model info i can find is ALE-L21
Da9L said:
Denmark and the model info i can find is ALE-L21
Click to expand...
Click to collapse
Download firmware from here
http://www.carbontesla.com/2016/05/download-huawei-p8-lite-b560-marshmallow-firmware-europe/
---------- Post added at 10:43 PM ---------- Previous post was at 10:38 PM ----------
Suleiman01 said:
Download firmware from here
http://www.carbontesla.com/2016/05/download-huawei-p8-lite-b560-marshmallow-firmware-europe/
Click to expand...
Click to collapse
Extract the file. There should be a dload folder in it. Paste dload folder in root directory of sdcard. Now to to settings --->updater----> press menu button---->local update.
If you can't find it somehow this is the easiest way
Power off your phone. Turn it on by pressing all buttons. The update well start automatically.
Suleiman01 said:
Download firmware from here
http://www.carbontesla.com/2016/05/download-huawei-p8-lite-b560-marshmallow-firmware-europe/
---------- Post added at 10:43 PM ---------- Previous post was at 10:38 PM ----------
Extract the file. There should be a dload folder in it. Paste dload folder in root directory of sdcard. Now to to settings --->updater----> press menu button---->local update.
If you can't find it somehow this is the easiest way
Power off your phone. Turn it on by pressing all buttons. The update well start automatically.
Click to expand...
Click to collapse
Thanks for this ! Device is now updated.. Right after i got the firmware on the device with your link it came with a OTA update..
Da9L said:
Thanks for this ! Device is now updated.. Right after i got the firmware on the device with your link it came with a OTA update..
Click to expand...
Click to collapse
Just press thank you button.
Greetings!...
Im facing the same exact problem
Im from
Sudan and my model number is
ALE-L02
THANKS
Ahegamer said:
Greetings!...
Im facing the same exact problem
Im from
Sudan and my model number is
ALE-L02
THANKS
Click to expand...
Click to collapse
Use DNS setting on the firmware update app on playstore went from 5.0 to 8.0 in one update
https://www.sammobile.com/firmwares/database/SM-G925F/
Android 7.0 for S6 Edge
Can we flash this rom for 925i?
Can I flash it on 925i?
If we flash it on g925i can we root by chainfire's cf autoroot?
Can i flash it directly over the existing 6.0.1 fw? Will the knoxx flag trigger in this case?
Dirrtydog said:
Can i flash it directly over the existing 6.0.1 fw? Will the knoxx flag trigger in this case?
Click to expand...
Click to collapse
No guarantees it will flash properly. It depends on the size of the hidden partition. I would wait for a debranded firmware like BTU or XEU.
Rom S6 Edge deodexed nougat 7.0
https://forum.xda-developers.com/galaxy-s6-edge/development/rom-s6-edge-nougat-7-0-t3570218
Dirrtydog said:
Can i flash it directly over the existing 6.0.1 fw? Will the knoxx flag trigger in this case?
Click to expand...
Click to collapse
not safe just wait it will get messy and you wont be able to update correctly.
Can anyone please some screenshots, if you have already updated your device?
ImAnurag said:
Can anyone please some screenshots, if you have already updated your device?
Click to expand...
Click to collapse
please i am still waithing too.BTU.
Any Faster download links?
Anyone confirm it works with cf auto root? If not im stayin on 6.0.1
Live for most G925F's, none listed yet for G925I, but i haven't had a problem on my G925I running it, very smooth, very fast, new keyboard is ugly af tho
source: http://updato.com/firmware-archive-select-model?q=g925f&v=Nougat(Android+7.0)&exact=1
boltron said:
Live for most G925F's, none listed yet for G925I, but i haven't had a problem on my G925I running it, very smooth, very fast, new keyboard is ugly af tho
source: http://updato.com/firmware-archive-select-model?q=g925f&v=Nougat(Android+7.0)&exact=1
Click to expand...
Click to collapse
Bro did u flash complete firmware or skipped CSC??
Can the firmware be flashed over 925I model?? Since the hardware is same I guess it shouldn't be a problem??
Thanks for your input @ joecool666 and @lynxblaine.
This morning I just received the 7 OTA on my device and is installing as we speak. It's aprox 200MB smaller than on the S7e (i'm on S6e).
For anyone interested.. I flashed this last night.. but it FAILED on hidden partition... had to emergency repair it. I'm using g925f in the UK on Vodafone..
Edit...
I flashed the UK Vodafone from sammobile
can i flash it with odin or i must install twrp recovery first?
has anyone tried secure folder app ?
I've installed it from Sammobile but it does not run saying "unauthorised"
I made a video of all the new features and the whole new design with nougat
if anybody is interested here you go
i know its the flat version but the firmwares are quite similar
https://www.youtube.com/watch?v=X3EnwrwvFmY
TimurAlaskara_TR said:
I made a video of all the new features and the whole new design with nougat
if anybody is interested here you go
i know its the flat version but the firmwares are quite similar
Click to expand...
Click to collapse
I saw it before yo write thus comment hahaha great vid
mrmrmrmr said:
has anyone tried secure folder app ?
I've installed it from Sammobile but it does not run saying "unauthorised"
Click to expand...
Click to collapse
Yes, I did try it but was unsuccessful to run the app.
Of course, because knox was tripped.
---------- Post added at 06:06 AM ---------- Previous post was at 06:00 AM ----------
JAMIE1000UK said:
For anyone interested.. I flashed this last night.. but it FAILED on hidden partition... had to emergency repair it. I'm using g925f in the UK on Vodafone..
Edit...
I flashed the UK Vodafone from sammobile
Click to expand...
Click to collapse
Maybe you need to remove hidden.img.
---------- Post added at 06:11 AM ---------- Previous post was at 06:06 AM ----------
[/COLOR]
xRaska said:
can i flash it with odin or i must install twrp recovery first?
Click to expand...
Click to collapse
Flash it with Odin. Why would you install TWRP for the purpose of updating to Nougat Official?
Does not make sense. Hence, good luck and happy flashing official OS 7.
:laugh:
---------- Post added at 06:12 AM ---------- Previous post was at 06:11 AM ----------
adie1234 said:
Anyone confirm it works with cf auto root? If not im stayin on 6.0.1
Click to expand...
Click to collapse
No one can confirm for the moment.
But there are already reports saying that they flash TWRP and Magisk for root then installed Magisk Manager from Play Store.