How to unlock any Huawei Bootloader after removal of unlock page including Mate SE - Honor 7X Guides, News, & Discussion

Hello All!
I was disappointed when I received my Huawei Mate SE BND-L34 (USA) 2 days ago that I could not unlock the bootloader because Huawei removed the unlock page from their website. Even after talking to support via live chat and email I could not get any help from them. So I decided to do my own research.
DISCLAIMER: THIS WILL WIPE YOUR DEVICE! THIS INCLUDES INTERNAL STORAGE! I am not responsible for any lost data or bricked devices!
Getting your Unlock Code:
1. First you need to go to https://www.dc-unlocker.com/ and register for an account. Do not download their software!
2. Instead download the software at https://hcu-client.com/
3. Install drivers via HiSuite if you have not.
4. View the supported devices page. Now the Mate SE is not listed as a supported device but it did work for my device (Mate SE).
5. Make sure your drivers are installed via HiSuite.
6. Now go into https://www.dc-unlocker.com/buy and buy 4 credits. This is needed for the software. Cost is 4 EUR ($5)
7. Launch HCU-Client and connect your phone.
8. Open the dialer on your phone and enter *#*#2846579#*#* select “Background settings”, “USB ports settings”, “Manufacture mode”.
9. Now in HCU Client log into your account (Check your Email for info) click Read Phone Info.
10. Go to Unlock tab and choose Read Bootloader code. It says it will wipe your device but mine did not get wiped until I unlocked my phone. This will take a couple of minutes. Watch the right terminal window. It should spit out your code.
Using your Unlock Code:
1. Turn off your phone, Boot your device into Fastboot mode with Vol down and power button.
2. CD to where you downloaded ADB/Fastboot Tools
Run these commands when inside ADB tools directory
a) fastboot devices. (your device should bee listed. If not reinstall drivers/reboot)
b) fastboot oem get-bootinfo (just to confirm everything is detected correctly
c) fastboot oem unlock <your_unlock_code>
3. Acknowledge the prompt on your phone. Device will be WIPED!
4. Once the wipe finishes it will take several minutes for phone to boot up. Do not panic. Once you See Huawei logo you are OK!
To root your Mate SE and Install TWRP follow this guide: http://www.desinerd.co.in/how-to-huawei-mate-se-root-twrp-recovery/
Do not use the Magisk Zip in that post. Instead grab it from here: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445

Reserved

dude thanks so much it worked!!! on the honor 7x!!

EDIT: To my surprise it actually worked

Anyone else having antivirus flagging the HCU exe as having a virus?

foltz61 said:
Anyone else having antivirus flagging the HCU exe as having a virus?
Click to expand...
Click to collapse
The tool is safe. It's a false positive. If you are unsure Go read the HCU-Client forums.
Its your decision but I haven't noticed any ill effects. You can always run it in a VM.

Ok. Thanks
Sent from my BND-L34 using Tapatalk

Stupid program won't run on my computer. Saw someone else on the dc-unlocker forums with the same problem. They linked a version to download but the link is dead now. I think this phone really wants to be returned.
Sent from my BND-L34 using Tapatalk

foltz61 said:
Stupid program won't run on my computer. Saw someone else on the dc-unlocker forums with the same problem. They linked a version to download but the link is dead now. I think this phone really wants to be returned.
Click to expand...
Click to collapse
You can try DC-locker instead of HCU-Client. I just find HCU easier to use.
Are u on Windows 10? If not make sure you have latest. NET Framework installed. Try running in compatibility mode.

Sandman-007 said:
You can try DC-locker instead of HCU-Client. I just find HCU easier to use.
Are u on Windows 10? If not make sure you have latest. NET Framework installed. Try running in compatibility mode.
Click to expand...
Click to collapse
Yes, Win 10. DC-unlocker link in the Android app shows 7x BND-L34 as compatible but it's not in the drop-down box of the Windows app and doesn't get autodetected .
Sent from my Ascend Mate 2 using Tapatalk

foltz61 said:
Yes, Win 10. DC-unlocker link in the Android app shows 7x BND-L34 as compatible but it's not in the drop-down box of the Windows app and doesn't get autodetected .
Click to expand...
Click to collapse
Yea only thing I can think of is make sure latest .Net framework is installed and latest Visual C. Maybe try compatibility mode

The DC-unlocker problems were my fault. After getting the drivers right, it detected my phone and pulled the unlock code.
Sent from my Ascend Mate 2 using Tapatalk

Logged into this account for the first time in YEARS just to say thanks a lot for this. I was pretty gutted when I found that Huawei removed their Unlock link and refused to give codes to anyone even via support emails.
I was super hesitant to try this though, I'll admit. Spending money on what (to me) looked like a shady site was the biggest red flag. But decided to bite the bullet and do it.
The only issue I had was that my phone DID get shut down after the bootloader code was read, which caused ADB not to be able to read my phone (adb devices) for some reason. So I had to turn it on, reboot fastboot via adb and then proceed from there. But that was the only issue I had.
So again, thanks a ton for this. :good:

Got problems making this work. Hope you don't mind helping an Android newbie.
Step 7 is to "start client". On Windows 10 I had to disable the virus scan just to see the HCU.exe from the extract. When I click on it I get "This application was unable to start correctly 0xc150002". Ideas? A previous step is to install drivers. I downloaded HiSuite and and made sure I could connect to my device. Does "installing drivers" mean something more ? Thanks.

Vevima said:
Got problems making this work. Hope you don't mind helping an Android newbie.
Step 7 is to "start client". On Windows 10 I had to disable the virus scan just to see the HCU.exe from the extract. When I click on it I get "This application was unable to start correctly 0xc150002". Ideas? A previous step is to install drivers. I downloaded HiSuite and and made sure I could connect to my device. Does "installing drivers" mean something more ? Thanks.
Click to expand...
Click to collapse
Nope you are good on the drivers. Nothing else to be done.
As for the error code I recommend disable your Anti-virus and the built in Windows Defender and then re-downloading the program. If it still doesn't work you can try the DC-unlocker program instead of HCU-Client. It should work I just have only used HCU-CLIENT.

Vevima said:
Got problems making this work. Hope you don't mind helping an Android newbie.
Step 7 is to "start client". On Windows 10 I had to disable the virus scan just to see the HCU.exe from the extract. When I click on it I get "This application was unable to start correctly 0xc150002". Ideas? A previous step is to install drivers. I downloaded HiSuite and and made sure I could connect to my device. Does "installing drivers" mean something more ? Thanks.
Click to expand...
Click to collapse
I had the same problem. I used dc-unlocker instead.
Sent from my BND-L34 using Tapatalk

Finally got my unlock code! Many thanks to Sandman-007 and foltz61 for their help.
Following instructions from #1 of this thread, I could not (like others here) get the hcu client working on my PC. So here are my instructions on using DC-unlocker instead:
1. Go to consumer.huawei.com / minisite / HiSuite_en/
Download HiSuite. Install it on PC. Connect Phone to PC. In HiSuite click connect to my device.
(May have to enter Developper Mode on Phone: Settings>About Phone>Tap 7 times on your Build number. Enable USB debugging.)
2. Go to www .dc-unlocker .com / buy
Item : New user account, User name you want, Your email, Credits: 4
They will send you a email with a username and password you will need later ...
3. Go to www .dc-unlocker .com / downloads
Download DC-unlocker client to PC. Install it.
4. With Phone still connect to PC, use phone dialer enter *#*#2846579#*#*
Select “Background settings”, “USB ports settings”, “Manufacture mode”.
5. Now start the dc-unlocker client on the PC.
Enter: Huawei Phones (not modems) + Auto Detect + Click Search Icon. You will then see some on your phone info.
6. Click on "Server" and enter your username and password from the email you got at step 2.
7. Click on "Unlocking" + Read Boodloading code. Voila! Copy paste your code somewhere safe!
After giving me my code, my phone shut down. I just re-started it and all was fine.
(To get a better idea, the youtube video v=Lgph755EbKEcovers steps 4 to 7.)

I just did some searching, in my backup images. And I found the unlock code inside the "splash2.img"
/dev/block/mmcblk0p19
Still looking into possible ways to read this from inside the phone, and from locked phone too.
NVM, I think splash2.img is just some type of log file

Is there any other way to get the bootloader unlock code? I tried to buy credits and they refunded me because my paypal is not verified.
Or does anybody out there have a license and would be willing to run my IMEI to get my code? I am at a loss of what else to do.

SimpleRick said:
Is there any other way to get the bootloader unlock code? I tried to buy credits and they refunded me because my paypal is not verified.
Or does anybody out there have a license and would be willing to run my IMEI to get my code? I am at a loss of what else to do.
Click to expand...
Click to collapse
Why don't you just verify your PayPal or use a credit card?
Someone can't just run your IMEI to get an unlock code. Only way is if they reprogram their device to use your IMEI. That's illegal.
You should NEVER under any circumstances just hand it out. Especially with this tool. Someone with this tool could steal your IMEI and knock you offline.

Related

Unlocking Omnia 7 after update

Hi all
I dont know if this is already around but i thought i would share with everyone.
So recently i updated my First Gen Omnia 7 to the latest update which then included the KK2 by samsung which blocked interop unlock.
Some people have had results restoring back and trying windowsbreak again, and some people have had no luck with this way.
I have had a result doing this way
1) Restore back as far as possible.
2) Developer unlock your phone. Search google as you can do this for free (it takes about 30-40 minutes).
3) Download and Install Windows Phone Device Manager & Windows Phone SDK 7.1
4) Using "Windows Phone Developer Registration" that comes with Windows Phone SDK 7.1, plug your phone in and sign into your windows live account that you registered with AppHub. Click Register and your phone is now registered
5) Now open Windows Phone Device Manager with your phone plugged in, this will now install "touchxperience" and you can now browse certain files, install apps etc.
6) Download http://www.wp7roottools.com/index.php/downloads/doc_download/2-samsung-1st-generation-interop-unlock. If you click Open when this has finshed downloading it will ask if you want to install. Click install and hopefully this will now install on your phone.
7) Once this has done, on your phone, go to dial a number and input "##634#" then on the next screen input " *#9908# ". This should bring up GPRS Manager , scroll down and it should say "Heathcliff73 Interop Unlock" click on this and click Save.
8) Reboot phone and You are now Interop Unlocked. Install Window root tools and what ever you want now.
If your 3G settings are messed up download and install this http://www.wp7roottools.com/index.php/downloads/doc_download/3-repair-3g-for-samsung
Enjoy
If this guide is already out there or has already been mentioned then sorry i havent come across it but i thought i would share my experience
Big Thanks to HeathCliff for his tools
I take no responsibilty in what might happen to your phone.

✪✪✪ [ROOT] [Restore] [OneClick OR Manual] [PC] [MAC] Kwongger's FLO Noob Root Kit ✪✪✪

✪✪✪ [ROOT] [Restore] [OneClick OR Manual] [PC] [MAC] Kwongger's FLO Noob Root Kit ✪✪✪
EVERYBODY!
WE ARE BACK DUE TO POPULAR DEMAND!!!​
Kwongger's All-In-One FLO Noob Root/Restore Kit FOR PC and Mac
YES! We are ADB FREE!!!​
Why we are back:
I really feel accomplished when I acutally do the commands myself! Apparently so do others, we are back B****ES!
I felt that I didn't get the help I needed/wanted as a n00b on XDA, this is a new account FYI, so I like to make n00b kits with AWESOME instructions, ENJOY!!!
FYI: I want to provide the best possible support that I can (even though this is free)
DOWNLOAD v3 ​
Hey! The ONE-CLICK/Restore update is currently uploading!
Instructions in post #2, Change-log in post #3.
DISCLAIMER:
By downloading the files, you accept the fact that I am NOT in anyway responsible for what YOU do to YOUR device, unless it starts shooting lasers at iOS devices, then all the credit is mine . Really,in all seriousness, this procedure is a BEGINNER procedure, I am simply providing instructions and TOOLS! I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE!!!​
Manual ROOT Instructions!
(If you want One-Click, then Just double-click either the Flo ROOT by Kwongger.bat (to root) or the Flo RESTORE.bat for a out-of-box restoration!
I’ll make a video soonish.​
Driver Installation!
To Install The Drivers Fresh
Connect your Android-powered device to your computer's USB port.
Right-click on Computer from your desktop or Windows Explorer, and select Manage.
Select Devices in the left pane.
Locate and expand Other device in the right pane.
Right-click the device name (such as Nexus S) and select Update Driver Software. This will launch the Hardware Update Wizard.
Select Browse my computer for driver software and click Next.
Click Browse and locate the USB driver folder. (The Google USB Driver is located in<sdk>\extras\google\usb_driver\.)
Click Next to install the driver.
Follow the Instructions!
Upgrade Existing Drivers
Or, to upgrade an existing Android USB driver on Windows 7 with the new driver:
Connect your Android-powered device to your computer's USB port.
Right-click on Computer from your desktop or Windows Explorer, and select Manage.
Select Device Manager in the left pane of the Computer Management window.
Locate and expand Android Phone in the right pane.
Right-click Android Composite ADB Interface and select Update Driver. This will launch the Hardware Update Wizard.
Select Install from a list or specific location and click Next.
Select Search for the best driver in these locations; un-check Search removable media; and check Include this location in the search.
Click Browse and locate the USB driver folder. (The Google USB Driver is located in<sdk>\extras\google\usb_driver\.)
Click Next to upgrade the driver
Follow the Instructions!
Click to expand...
Click to collapse
Unlocking The Boot Loader!
1. Enable USB Debugging on your Nexus 7 in Development Settings
2. Open yourself a Command Prompt (or Terminal for MAC) in the Kwongger Nexus 7 folder!
a. Hold down shift
b. Right Click in the folder
c. Click Open Command Window/Prompt here
3. Boot into the bootloader using:
Code:
adb reboot bootloader
!!!!!!!!!!!NOTICE!!!!!!!!!!!!!!!
The next step will FACTORY RESET your device!!!
4. Once it is in the bootloader, enter this:
Code:
fastboot oem unlock
5. It will now ask you if you do, in fact, want to unlock your bootloader. Use Volume up/down to select YES and hit power to Confirm.
6. Your Nexus 7 FHD now has an Unlocked Bootloader.
7. IMPORTANT:
Reboot the device!
Click to expand...
Click to collapse
Choose either TWRP or CWM!
Installing TWRP!!!
1. Get into Your bootloader Again. (Above)
2. Type the following to flash the Team Win Recovery Project version 2.6:
Code:
fastboot flash recovery nexus7twrp.img
note: if you change the name use that in the .img part
3. Done!!!
Installing Clockwork Mod Recovery!!!
1. Get into Your bootloader Again. (Above)
2. Type the following to flash the Team Win Recovery Project version 2.6:
Code:
fastboot flash recovery nexus7CWM.img
note: if you change the name use that in the .img part
3. Done!!!
Click to expand...
Click to collapse
Rooting on Android 4.3!!!
.01 Copy The SuperSU.zip to the internal storage of your device.
1. Boot in to your bootloader and use the volume keys to select Recovery and use the Power button to confirm.
1a. RECOMMENDED: Tap BACKUP and Swype to confirm to make a backup of your current, UNROOTED n7.
2. Tap INSTALL.
3. Navigate to where you put the SuperSU.zip
4. Tap the zip.
5. Swype to confirm the flash!
6. If all goes well (no reason that I know that it shouldn’t) YOUR NEXUS 7 IS ROOTED!!!!
Click to expand...
Click to collapse
CONGRATS!!!!!!!!!!!!!
v1
Nothing New! This is 1.0
Click to expand...
Click to collapse
v2
I updated the Fastboot and ADB because some people were having some issues, it seems to have fixed the issues.
Click to expand...
Click to collapse
v3
I added the ever popular Mac Support! AND Clockwork Mod Recover, I don't know it is touch or not XD, could someone check? Just type
Code:
fastboot boot recovery nexus7CWM.img
and let me know! Thanks in advance.
Click to expand...
Click to collapse
I'm on windows 8 and have all the drivers installed but when I try and use the command "adb reboot bootloader" I get "error: device offline"
---------- Post added at 08:30 AM ---------- Previous post was at 08:12 AM ----------
I got it to work using the normal android sdk download. I couldn't get it to work using just the files I downloaded from you.
Gabik123 said:
I'm on windows 8 and have all the drivers installed but when I try and use the command "adb reboot bootloader" I get "error: device offline"
---------- Post added at 08:30 AM ---------- Previous post was at 08:12 AM ----------
I got it to work using the normal android sdk download. I couldn't get it to work using just the files I downloaded from you.
Click to expand...
Click to collapse
That's weird. I will update it.
Sent from my HTCONE using XDA Premium HD app
Actually!
Are you on 32bit? I included 64bit.
I like that you moved it to General!!!
I always thought that the DEVELOPMENT threads should be only used for KERNELS/ROMS
THANK YOU
Hey man, thanks for the instructions but could you clarify that you have to restart/boot up completely after unlocking the bootloader? I was still in fastboot after unlocking it when I flashed TWRP, and now TWRP is asking for a password, failing on all operations and I'm stuck in a bootloop.
EvanVanVan said:
Hey man, thanks for the instructions but could you clarify that you have to restart/boot up completely after unlocking the bootloader? I was still in fastboot after unlocking it when I flashed TWRP, and now TWRP is asking for a password, failing on all operations and I'm stuck in a bootloop.
Click to expand...
Click to collapse
Dang Dude, I am sorry. I just went ahead and put that in. :/
I want to help you with this.
Can you get into the boot loader or anything? Maybe if you can get TWRP working, I can send you a Nandroid of a stock, one (Once I get mine )
Kwongger said:
Dang Dude, I am sorry. I just went ahead and put that in. :/
I want to help you with this.
Can you get into the boot loader or anything? Maybe if you can get TWRP working, I can send you a Nandroid of a stock, one (Once I get mine )
Click to expand...
Click to collapse
Just found the solution in another thread: Open TWRP, Format Data first, then Factory Reset, finally reboot. I knew it wasn't a long term problem but I'm glad I didn't have to wait for Google to release Factory Images lol.
Gabik123 said:
I'm on windows 8 and have all the drivers installed but when I try and use the command "adb reboot bootloader" I get "error: device offline"
---------- Post added at 08:30 AM ---------- Previous post was at 08:12 AM ----------
I got it to work using the normal android sdk download. I couldn't get it to work using just the files I downloaded from you.
Click to expand...
Click to collapse
I am having this issue in windows 8 also, "offline" but I am getting the same thing using android sdk. Can someone provide some assistance please. Not sure why having such an issue.
EvanVanVan said:
Just found the solution in another thread: Open TWRP, Format Data first, then Factory Reset, finally reboot. I knew it wasn't a long term problem but I'm glad I didn't have to wait for Google to release Factory Images lol.
Click to expand...
Click to collapse
AWESOME!!!!!!!!!!
I feel better now XD
jmill75 said:
I am having this issue in windows 8 also, "offline" but I am getting the same thing using android sdk. Can someone provide some assistance please. Not sure why having such an issue.
Click to expand...
Click to collapse
I don't know... I have Windows 7. I also have NO IDEA why this would happen... Try using a port on the back of the PC (desktop) . If that doesn't do it, try USB 3.0 (if you have it). Also, if you are using the Stock cord, try other cords. That is all I can think of... :/
Kwongger said:
I don't know... I have Windows 7. I also have NO IDEA why this would happen... Try using a port on the back of the PC (desktop) . If that doesn't do it, try USB 3.0 (if you have it). Also, if you are using the Stock cord, try other cords. That is all I can think of... :/
Click to expand...
Click to collapse
There is a way to disable driver verification after rebooting in windows 8. I had to do this with my SGSIII and Win 8 x64, just google around for it, bet that's the problem.
RubenRybnik said:
There is a way to disable driver verification after rebooting in windows 8. I had to do this with my SGSIII and Win 8 x64, just google around for it, bet that's the problem.
Click to expand...
Click to collapse
Thanks! I will find it and add it to the instructions with credit.
Sent from my HTCONE using XDA Premium HD app
I see the pack includes the tools for MAC. I am on 10.8.4. Has anyone tried this on a MAC yet? I will be doing so later.
androidfr33k said:
I see the pack includes the tools for MAC. I am on 10.8.4. Has anyone tried this on a MAC yet? I will be doing so later.
Click to expand...
Click to collapse
Wait how would you do this on mac? Does the same .zip file work or would I need a different one? If you get it working please post a tutorial!
Looks like SuperSU came with the TWRP image(no need to copy it over separately). I tried to reboot from TWRP after updating the recovery and it forced me to flash SuperSU to root.
Nxxx said:
Wait how would you do this on mac? Does the same .zip file work or would I need a different one? If you get it working please post a tutorial!
Click to expand...
Click to collapse
I included Mac ADB... But not fastboot, you would need Fastboot as well, i'll get a Mac pack up tonight.
disregard....
working great! thanks OP

MTP Solution!

Hi!
I've been having some problems with MTP and I've been searching for days and finally found a solution!
My problem was that MTP was showing a yellow exclamation in device manager and an error "Code 31"
After installing, uninstalling and re-installing dozens of drivers I found this solution:
1. With phone unplugged open cmd (Run as Administrator)
2.Type this command:
Code:
net localgroup Administrators "local service" /add
3. Plug phone
4. ???
5. Profit!
Check this thread for more info - all credits here: http://forum.xda-developers.com/showthread.php?t=1115366
It looks dangerous for your computer security.
Regards
Magissia said:
It looks dangerous for your computer security.
Regards
Click to expand...
Click to collapse
Well maybe it is a bit dangerous..however, it does not add your local account to the administrator group. just the "Local Service" account.
This is the only solution I've found for my MTP problem and I thought it would be good to share cause I've spent days trying to fix it.
Anyway, I believe there are many things we do in these forums here(generally, at xda forums. not m8 specific), that make our phones less secure, but we still do it because we love to control our devices in any way we want.
:highfive:
Easiest way is just to swich off device (yes off ?) plug to Pc and wait for Windows to install correct drivers
Works for me ?
pawslo1984 said:
Easiest way is just to swich off device (yes off ?) plug to Pc and wait for Windows to install correct drivers
Works for me ?
Click to expand...
Click to collapse
This for didn't work on my PC. But what did work (similar) is to manually select the device in Device Manager, and pick the option to pick the drivers, then selected the generic Android MTP device.
andreasyeah said:
Hi!
I've been having some problems with MTP and I've been searching for days and finally found a solution!
My problem was that MTP was showing a yellow exclamation in device manager and an error "Code 31"
After installing, uninstalling and re-installing dozens of drivers I found this solution:
1. With phone unplugged open cmd (Run as Administrator)
2.Type this command:
Code:
net localgroup Administrators "local service" /add
3. Plug phone
4. ???
5. Profit!
Check this thread for more info - all credits here: http://forum.xda-developers.com/showthread.php?t=1115366
Click to expand...
Click to collapse
OMG...I just want to thank you so much! I know you may not be the original credit, but thank you so much for reposting this! I have had my Galaxy Tab Pro 8.4 for months now with its damned MTP Device was unsuccessful and have not been able to enact a solution til now! I am truly appreciative...
simplepinoi177 said:
OMG...I just want to thank you so much! I know you may not be the original credit, but thank you so much for reposting this! I have had my Galaxy Tab Pro 8.4 for months now with its damned MTP Device was unsuccessful and have not been able to enact a solution til now! I am truly appreciative...
Click to expand...
Click to collapse
Glad you finally found a solution!

Please help (need working unlock and root instructions)

I've been up and down the forums for two days trying every method and app and whatever else is recommended.
asus zenfone 2 laser
Z00TD (ZE551KL)
-i cannot unlock bootloader (Asus unlock tool does not work for any variant)
- cannot root with any one click app (assuming because bootloader is locked)
- cannot manually install drivers via any instructional method online. (They all seem to be 64 bit when I have a 32 bit machine) and there is no actual exe file to install anywhere that i can locate.
- cannot use windroid as it requires twrp (basically root) ....useless.
-cannot adb command unlock or root, does not recognize device (assuming because proper drivers are not installed)
I'm on the updated software version 1.16.40.763-20151201
Someone please give me a hint or some lead as to what I'm missing or where I'm going wrong.
Thanks in advance.
Download the adb-fastboot tool from here...:- Moderator EDIT PPC links are not allowed
Install it.. it will ask you for installing drivers also.. install them... Visit Asus.com and download the drivers for your device. . Now search for Device manager in Windows start menu. Click on Device Manager and then you will see a device named as Android or something like that... Right click on it.. then select update drivers... Then you will see two options 1). Check online 2. Browse my Pc for updated drivers.. select the 2nd one now browse the downloaded file of drivers and select it.. select the folder of files .(After unzipping the folder)...
Click on update.. now drivers will get installed.. now
Use Ctrl+shift+right click..(in adb folder mainly located in local disk c) and select open command Windows here. Enable the USB debugging option in developer options of your device.. At first it will ask for permissions. Alow it.. Now you can flash anything.. for further information ,if needed you can contact me..
Njishi said:
Now you can flash anything.. for further information ,if needed you can contact me..
Click to expand...
Click to collapse
LOL
Njishi said:
Download the adb-fastboot tool from here...:- Moderator EDIT PPC links are not allowed
Install it.. it will ask you for installing drivers also.. install them... Visit Asus.com and download the drivers for your device. . Now search for Device manager in Windows start menu. Click on Device Manager and then you will see a device named as Android or something like that... Right click on it.. then select update drivers... Then you will see two options 1). Check online 2. Browse my Pc for updated drivers.. select the 2nd one now browse the downloaded file of drivers and select it.. select the folder of files .(After unzipping the folder)...
Click on update.. now drivers will get installed.. now
Use Ctrl+shift+right click..(in adb folder mainly located in local disk c) and select open command Windows here. Enable the USB debugging option in developer options of your device.. At first it will ask for permissions. Alow it.. Now you can flash anything.. for further information ,if needed you can contact me..
Click to expand...
Click to collapse
When uninstall those drivers I get the yellow triangle on them. They aren't functioning.
Sent from my A1R using XDA-Developers mobile app
nujaxx said:
When uninstall those drivers I get the yellow triangle on them. They aren't functioning.
Sent from my A1R using XDA-Developers mobile app
Click to expand...
Click to collapse
You don't need to uninstall them.. just update them..
Typo.... install
Sent from my A1R using XDA-Developers mobile app
I must be doing something wrong. Because I've done all of that. And the drivers don't install properly. I can get into fast boot and that's where it stops for me. The bootloader 20007.img code keeps failing.
I don't know. Something isn't right. I can't even unlock it with the Asus unlock tool. I've tried every one for every variant.
Sent from my A1R using XDA-Developers mobile app
this might sound stupid, but try a different, better, usb cable.
I had a similar issue years ago, trying to flash my first android phone, windows would also give me device manager error. i beat my head on the wall for two days using the motorola supplied data cable, until on a whim i tried a different USB cable and everything worked.

[HOW TO] Recover HARD BRICKED Nokia X2 : DOESN'T TURN ON, NO VIBRATION, NO LIGHT

So, Guys. Myself thought of writing this thread so that you can prevent yourselves from entering into danger as well as get rid of it even if you enter by mistake.
As you all know that, we are currently facing an issue of SIM offline, myself got into the trouble (as per me, when i insert a sim in sim 1, device recognizes the network provider but there is no signal. sim 2 is fine) and inorder to rectify that issue, i tried all possible ways like deleting IMEI and rewriting it, changing modem etc.
But nothing worked and so thought of using NOKIA CARE SUIT (NCS) >> Product Support Tool For Store 5
& change the firmware to Nokia X2DS RM-1013 059V782 v2.1.0.13 which was the biggest mistake which i ever committed and it resulted in hard brick.
I suggest everyone not to flash 2.1.0.13 version please
In my case, i was not even able to use the volume buttons and power button inorder to get to bootloader or custom recovery. Trust me, i'm not a noob but i do know the situation in which i'm and searched everywhere and took help of lots of guys and finally found the solution to it.
Just follow these steps:
A. Requirements:
1. Nokia Firmware - Thanks to Firmware27
2. QPST_2.7.422
3. QDLoader HS-USB Driver
B. Procedure:
1. Extract Requirement - 1, 2, 3 separately.
2. Now Install requirement - 2 & in Requirement - 3, just install Setup
3. Now connect USB to NOKIA X2 & Laptop/PC
4. Click on the start menu and type QFIL in search box and open it.
5. Under "SELECT PROGRAMMER", click on the browse button and
select "rm1013_2.1.0.13_user_prog_emmc_firehose_8x10. mbn" from the Requirement - 1
6. Under "DOWLOAD", you will find "LOAD XML" and now click on that and a window will appear infront you :silly:
7. Now in the window, type *.xml in the file name so that the xml files will show up.
8. Now select "rm1013_2.1.0.12_059V787_001_rawprogram_unsparse_ui"
9. Soon another window will show up automatically and now type *.xml in the file name so that the xml files will show up.
10. Now select "P12026702dpi600_label_layout"
11. Now Click on the "DOWNLOAD" just button below the Load XML button.
- Make sure your device is connected to the PC/lappy through cable :silly:
Everything is done. Now sit back and Relax.
Your NOKIA X2 will bootup and it looks exactly like device when you purchased except the scratches and all
Note:
I'm not responsible if your device is bricked. Ofcourse if you are doing this, it means that your device might have already been bricked and i guess there is no other way except this to make it right
This works with all the snapdragon chipset devices.
my phone just showing QHSUSB_BULK but it get warning mode, after i install that files it get qloader 9008
but when i download with qspt it get on sahara cannot working
frnsl3 said:
my phone just showing QHSUSB_BULK but it get warning mode, after i install that files it get qloader 9008
but when i download with qspt it get on sahara cannot working
Click to expand...
Click to collapse
The only prob is OS which you are using and Drivers..
Thx, its helped me
Dear,
I am also having the same issue and tried ur method . But I am not able to install the last set up u provided under 2. QPST_2.7.422. it says as "The following package files could not be found:
C:\Users\AMR\Downloads\BallardAppCraftery.CraftyFileViewer_epyrqhfctk40t!App\2. QPST_2.7.422\vcredist_x86\vcredist_x86."exe subsequently the QFIL is not downloading the .xml content. A help would be greatly appreciated.
Kuttappan555 said:
Dear,
I am also having the same issue and tried ur method . But I am not able to install the last set up u provided under 2. QPST_2.7.422. it says as "The following package files could not be found:
C:\Users\AMR\Downloads\BallardAppCraftery.CraftyFileViewer_epyrqhfctk40t!App\2. QPST_2.7.422\vcredist_x86\vcredist_x86."exe subsequently the QFIL is not downloading the .xml content. A help would be greatly appreciated.
Click to expand...
Click to collapse
if you are saying that you cannot download from the link i provided.....i just checked it. Itz working fine. i saved it in my g-drive and shared the link
Hi, I tried this and everything worked fine but phone didn't boot up. I mean the flashing worked but phone did not reboot. Screenshot attached. Do you know what is missing?
Is this method still working?
Hard Bricked
Still Working??
Can someone re-upload these files or point to the right direction?

Categories

Resources