Related
Hi...
I have p3400 gene .... I really want my phone to upgrade to WM6.1proffesional
So, I tried the the guide available here at xda-develpors [GUIDE] Step by Step Guide for Upgrading P3400 and P3400i ROM + FAQs
Now, My phone is dead ... when I press the power button ... the red and green button blink once and nothing else happen
I tried the Power+camera and a screen with 3colors appear (red,green,blue) with these writing on it ...
ONLP 1.10.0000
SPL 1.10.olip
my S/N is HT8xxxxxx.
I have widows 7 on my computer so I tried :
I did [Step 2: Preparing your phone] successfully
then in step 3
You need to take these steps :
1. Go to desktop, right click Computer, and select Manage. Go to Device Manager. Now under the section Mobile Devices, Double Click : Smartphone USB Sync.
2. On the Drivers tab, click "Update Driver..." button. On next screen click : "Browse my computer for driver software".
3. Click : "Let me pick from a list of device drivers on my computers". Click "Have Disk.." on next screen. Click "Browse..." and go to the folder extracted in step 1. There, go to USBDriverforActiveSyncVista folder. Here select the file "wceusbsh.inf" and click OK.
4. Click Next and finish the wizard.
Click to expand...
Click to collapse
but when I select "wceusbush.inf" ... I get this error
HTML:
the folder you specified doesn't contain a copatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for x64-based systems
I don't know how to solve it
and when I try the ROMUpdateUtility program ... I get [ERROR 300
when I tried Step 5: Use the Orefkov Unlocker
after opening the Mtty1_42.exe ... here are the problems
- I don't find the usb button
and when I click okay ... on the next screen ,,, the keyboard just doesn't work
only [delete] and [ctrl+v] nothing else works ...
P.S. I use the windows mobile device center on my computer to sync my info to my p3400
need help to solve the problem
I really want the WM6.1proffecional
and could any one give the best rom for it??? and will I have a touch flo problem afterwords ????
Please help A.S.A.P
come on guys ... The site of the best develepors and till now .... no answere
just so you get this solved as fast and smoothly as possible...lets just go through this step by step...
(i don't mean to sound rude but there's something you need to know before you start expecting miracles here, let me tell you...this site does indeed have an amazing lot of people who have spent countless amount of time working on and with their phones...but not everyone has the time to log in everyday and keep a track of the infinite number threads they might be following...and even when they do log in and read your problem, they might not necessarily have a solution for you at that time...
patience is the key...wait for someone to read, understand and then provide a solution for your problem, if it exists...this is a phone developers site...not one for magical cures
and most importantly...post your problems in the appropriate threads...like this one should've been in the Q&A thread in the ROM development section...or in the upgrading thread itself...you'd get more replies that way...you don't have to start new threads)
now...i read through your post where you've described your problem very nicely...and i couldn't see where you've tried running the olipro patch...
but since you can see SPL as 1.10.olip in bootloader mode i'm assuming you tried that...
now if the phone is bricked then it probably means you phone is the new gene...
all you have to do is run mtty exactly as it is explained in the thread...you just have to get the driver given in the tools zip file...
as you mentioned that you've tried setting the driver and it didn't work...
you can try 2 things...
1> try running the same procedure from step 3 onwards on someone else's computer/laptop...(this is somethings others have mentioned working for them)
2> uninstall and reinstall windows mobile device center to get the default drivers for your phone on your comp...start your phone in bootloader mode by holding down the camera button while restarting the phone...now when you have the tricolour screen on, connect it to your comp via usb...
after your comp detects the device, open device manager and try updating the driver (download the tools zip file again just to be sure)...
after updating driver, the mtty should run perfectly...make sure you do everything in step 5 100% correctly...read the instructions over and over again just to be sure...(this is the method that worked for me...but again, as you will read everywhere here, be sure to do it correctly...no one on this site is responsible for any problems you'll have with your device)
if you have any doubts or problems in getting it to work...post it up in detail like you've done here
Sorry .. my bad
BUT like I said ... I am a complete newbie here
I wanted to ask ... should I repost my problem in the Q&A or will the moderator move it
I will try it on other computer ....
thanx for your help
yes, I actually used Step 4: Use the Olipro method first.
thats why bootloader mode is on ...
but after that comes the problem
since the drivers seem to be buggy with the x64 windows 7 just try running everything from step 5 onwards carefully...AFTER you have changed the appropriate drivers first as mentioned in step 3...
do these things on someone else's computer/laptop with a 32-bit os (x86)
i'm running the 32-bit windows 7 and i can assure you it works for both newgene and oldgene perfectly...
so next few things for you to do-
1> borrow someone's comp
2> install windows mobile device center (active sync for xp users)
3> start phone in bootloader mode and connect it via usb
4> locate it in device manager
5> change drivers for the device
6> continue from step 5 in the upgrading thread
hope it works...good luck
Problem solved .... thanx man ... thanx
forum.xda-developers.com/showthread.php?p=8519520#post8519520
Hello,
I want to install the 2.2 rom, but I dont know how, I've searched here, but I couldnt understand much, the link I've tried are dead or in russian (which confuses me a lot).
So I'd really love if someone could make a step by step tutorial to help me out.
Please, include links.
Thanks
And please, if you can, plz help me understand what is the recovery mode, and how to do so...
Thank again
Follow this thread: http://forum.xda-developers.com/showthread.php?t=857213
If you can't understand...I'll post another guide.
This is a guide I followed from another forum, and posted elsewhere with some minor additions in case anyone had problems.
The guide is from a forum post at the android forums,it is NOT my work, the added bits are mostly what I have found from browsing here and from asking questions. While I can't be held liable if you mess your phone up having done so myself I thought this could helpa few people and save them searching various threads for answers so hope it helps
The guide
To install this ROM you need to have fastboot enabled on your phone. If you have Android 1.6/2.1 installed from LG, then fastboot is not enabled. I will explain how to enable fastboot on your phone (this involves re-flashing/replacing your currently installed firmware):
I am unable to post links yet so you will have to copy and paste the appropriate link into your browser replacing the ** with tt
KDZ Updater Carphone Warehouse Unlocked.zip can be downloaded at h**p://goo.gl/7aRTc - A link to a zip archive with all the files needed to flash to Android version 2.1 with fastboot (Carphone Warehouse Unlocked)
KDZ Updater Europe Open.zip can be downloaded at h**p://goo.gl/BOcYT - A link to a zip archive with all the files needed to flash toAndroid version 2.1 with fastboot (Europe Open)
Download the version that best applies to you, if you live in the UK, I'd recommend you download the Carphone Warehouse Unlocked version, whereas if you live in Europe, I'd recommend the Europe Open version (simple right? )
I live in the UK and used the open rom from Europe as the Carphone Warehouse rom would not install
Now, how to flash these versions; I'll explain in detail how to flash the ROM's from starting with backing up.
Instructions to install ROM with Fastboot:
1. Before you start, make sure you backup all your data by installing the z4root.1.3.0.apk file onto your phone, then open it and choose 'Permanent Root'. Your phone will root and reboot. Then go to the Market and install 'MyBackup Root', open it and do a backup of your apps and personal data (contacts, sms, call log etc.) Once this is done, go to Settings>SD Card and Phone Storage>Unmount SD Card, a notification in the notification bar should appear saying 'SD Card safe to remove'. Remove the battery cover and remove the SD card and store it in a safe place. Then continue to step 2.
2. Extract the .zip file you downloaded to your computer (e.g. your desktop). Open the folder and install MSXML 4.0 SP3 Parser (msxml.msi).
3. Once that has finished, install LGAndroidDriver_WHQL_ML_Ver1.0_All_Win7.exe which are the drivers so your computer will recognize your phone.
4. Next, open KDZ_FW_UPD.exe
(i) Change 'Type' to '3GQCT' *THIS IS A MUST, THE UPDATE WILL NOT WORK OTHERWISE AND YOU MAY BRICK YOUR PHONE*
(ii) Make sure 'PhoneMode' is set to 'DIAG'
(iii) Browse for the 'V20B_00+Fastboot.kdz' file.
5. Prepare the phone by enabling USB Debugging by going to Settings>Applications>Development>Enable USB Debugging and connect the phone to the computer via USB cable and wait for the drivers to install for the phone.
6. Click 'Launch software update' and do not use your computer until the update is complete. The update will take roughly 10-20 mins to complete.
If you have a problem with this try a different rom, this guide offers two to choose from.
Instructions to install CyanogenMod:
Once the update is complete, your phone will reboot, what you need to do is power off the phone and whilst the phone is off, press and hold the 'Camera' button all the way ANDpower on the phone, make sure you hold the 'Camera' button. The phone will display the LG logo and disappear, then display a blank screen. The phone is now in fastboot mode!
Now you want to download this file: Flashing CyanogenMod.zip and extract it to a folder called 'Android' (without the quotes '') on the C: drive (you'll probably need to make this folder yourself.
1. Now open CMD with administrator privileges (Search for CMD in the start menu and right click on 'cmd' and click 'Run as Administrator' )
2. Connect the phone to your computer via USB cable and wait for the necessary drivers to install.
If when connected with a usb cable the computer says "waiting for device" and nothing else happens try installing the fastboot drivers. You can do this by going to the control panel of your pc, from the Windows start menu, opening the list of devices and where you see the one representing your phone (likely, as was the case with me, it will say android and have a yellow exclamation mark over it). Different versions of Windows do things slightly different but what you need to do is simply update the driver by choosing the icons properties box choosing UPDATE or INSTALL DRIVER and when asked pointing it to the folder where you unzipped the drivers.
3. Then go back to the cmd window and type:
Code:
cd C:\Android
(i) Then type:
Code:
fastboot.exe -w
(ii) Once that's completed, type:
Code:
fastboot.exe erase system
(iii) Once that's completed, type:
Code:
fastboot.exe flash system system.img
(iv) Once that's completed, type:
Code:
fastboot.exe flash boot boot.img
(v) Once that's completed, type:
Code:
fastboot.exe reboot
4. Your phone will now reboot with CyanogenMod 6.1.1 (Android 2.2.1). The first boot might take longer than a normal boot.
If your phone stays at a blank screen you simply forgot to do one of the above steps, in which case simply repeat them. It is likely if that happens that you simply forgot the flash boot image instruction.
5. You can now re-insert your SD card and go to Settings>SD Card and Phone Storage>Mount SD Card
Enjoy!
The instructions for flashing both the firmware with fastboot and flashing CyanogenMod are included in the zip archives called 'Readme'. I'll update the links so that you'll always have the most up to date version of CyanogenMod available for download, note that if you choose to update your phone you will loose all your data including apps etc. so backup before you update
And that, with a few comments added by myself, is the guide.
Once you have set your phone up the way you want power off your phone. Hold the HOME and POWER buttons down while the LG logo appears and you will see a menu appear on screen.
Using the volume down key to navigate the different menu choices, and the camera button to select an option choose the BACKUP OR RESTORE option and from the sub menu that it will give you choose BACKUP.
This will make a backup of your phone AND all your data, if you ever mess up an update or think you have damaged your phone in the future simply holdthe POWER and HOME buttons down and when the menu appears choose the RESTORE option
Click to expand...
Click to collapse
You also need fastboot drivers.
http://forum.xda-developers.com/attachment.php?attachmentid=495093&d=1295551234
guide to install openswift
please, anybody who has rights to edit first post of openswift thread,
add this link, is very good guide
http://android.modaco.com/content/lg-gt540-optimus-gt540-modaco-com/329916/a-full-guide-to-getting-android-2-2-on-your-phone-for-total-newbs-like-me/
somoant said:
please, anybody who has rights to edit first post of openswift thread,
add this link, is very good guide
http://android.modaco.com/content/lg-gt540-optimus-gt540-modaco-com/329916/a-full-guide-to-getting-android-2-2-on-your-phone-for-total-newbs-like-me/
Click to expand...
Click to collapse
Oh...there's the link. Been trying to find it! Thx =)
MegaBubbletea said:
Oh...there's the link. Been trying to find it! Thx =)
Click to expand...
Click to collapse
you're welcome
Another question, which one should I donwload?
KDZ Updater Carphone Warehouse Unlocked.zip
KDZ Updater Europe Open.zip
My phone is from US, so both would work?
brunouvn said:
Another question, which one should I donwload?
KDZ Updater Carphone Warehouse Unlocked.zip
KDZ Updater Europe Open.zip
My phone is from US, so both would work?
Click to expand...
Click to collapse
Either one will be fine. Those are just for temporary Rom because they have fastboot. You wont be keeping them.
Sent from my GT540 by MBt
little question... how long does it takes to complete the process? my phone is on download mode for like 30 minutes.. kinda nervous here, its stuck at:
3GQCT : wParam = 205, IParam = 0
btw, internet should be on?
What!? You sure u followed the instructions very carefully? Using the KDZ updater tool and correct settings?
yes, followed step by step
What happens if I cancel the process?
Well...which step are you on at the moment?
Step Complete : C Drive Erase
Wo wo wo...so it's done? Finish flashing v2.1 on ur android with fastboot?
dont understand, its done?
Well...what's happening on screen in the updater? Does your phone reboot now? No more safe mode?
If it is rebooting then it's done. Now all you have to do is get into fastboot mode which means holding CAMERA + POWER when turning on your phone.
on the phone is still download mode and the last line on the updater is:
3GQCT : wParam = 205, IParam = 0
Did you uncheck "Mass Storage Only" in the phone before you flashed? That may be ur problem....or try unmounting the SD.
yea, I think mass storage only was off, and sd card isnt in
What about USB debugging mode? That needs to be checked.
THIS GUIDE WILL HELP YOU ROOT ANY WILDFIRE WITH HBOOT VERSION 1.01.0001/1.01.0002
This guide is in fact a combination of two other guides:
http://forum.xda-developers.com/showthread.php?t=1145035
http://forum.xda-developers.com/showthread.php?t=1130044
I take no responsibility for whatever may happen to your phone.
To root, you first need to gain S-OFF, this part is taken from the first thread.
So here we go,
- Before doing anything, make sure you have the latest HTC SYNC on your PC (get it from here).
- Connect your phone to PC and sync all your data (contacts, media, docs...etc.)
- Disconnect your phone, then uninstall HTC SYNC, but you must leave the drivers on your PC.
(i.e. Uninstall the htc sync program only, not the drivers)
S-OFFing the Device
Downgrade to HTC Froyo WWE for AlphaRevX "now named: Revolutionary" (HBOOT 1.01.0001)
It has been confirmed that AlphaRevX "Revolutionary" tool is not S-OFFing wildfire (buzz) 2.2.1, with HBOOT 1.01.0002!
Therefore, downgrading the HBOOT to 1.01.0001 is must for the meantime, to get an efficient S-OFF.
Lots of people seem to be having issues when trying to downgrade their Wildfire from a carrier-branded version (HBOOT 1.01.0002) to unbranded WWE (HBOOT 1.01.0001).
So, here’s a small package to help you do this.
click here.
If you have HBOOT 1.01.0001, you can skip to the step entitled Revolutionary
Extract this package somewhere you can find it, like your “Desktop” for example.
Step 1: run step1.bat from the package. This will downgrade your MISC partition to allow for the RUU downgrade.
At the end, GoldCardTool will start up, to allow you to create a goldcard which you will need before starting Step 2.
How to deal with Gold-Card Tool:
1. Switch off your phone, remove your microSD card.
2. Insert the microSD card into your card reader, connect it to your computer and format the card to FAT32 file system.
3. Insert the card into your HTC Wildfire and power it on.
4. Make sure USB Debugging is enabled on your phone in Menu > Settings > Applications > Development.
5. Connect the phone to your computer via USB and set the mode to charge only.
6. Launch Gold-Card Tool on your computer and click ‘GetCID’.
7. Copy the CID code from the text box and click the link shown below that text box to open it in your browser window.
8. In the browser window, enter all the details required and submit that form.
9. You should now get an email from PSAS. Open it and download the ‘GoldCard.img’ attachment.
10. Now set your phone’s USB mode to Mass Storage.
11. In Gold-Card Tool, click ‘Refresh’.
12. Select your mounted SD card from the drop-down menu saying “HTC MMC:”
13. Click ‘Load Goldcard.img’ and select the file downloaded in Step 11.
14. Click ‘Patch MMC’ and your Gold Card will be created. You may exit Gold Card Tool once done.
After you've made the goldcard, and patched it, continue with step 2.
• Step 2: run step2.bat from the package. This will downgrade your ROM version to HTC WWE Froyo for Wildfire (unbranded).
If you get a Customer ID error while doing this, your goldcard is not working!
Create a new goldcard and re-run step2.
Revolutionary
* Steps:
1st You need to get to: http://revolutionary.io/ to download the tool, and to get your “beta key” which you’ll get in a pop-up window in the same download page after you click the download link for (windows version).
The “beta key” is a must; the tool won’t work without it!
You’ll be asked to provide your phone “serial no.”, typically it should be something like HTXXETDXXXXX, and you can get it from:
Settings --> about phone --> phone identity.
Now, do the following:
1. Run latest version of HTC Sync on your PC and connect phone in HTC Sync mode and sync all your files. Remove HTC Sync and not the drivers.
2. Reboot phone.
3. Settings->Applications->Development->Check “USB Debugging”.
4. Run Revolutionary and connect phone to PC in “Charge Only mode”.
5. Revolutionary should recognize your phone and show your Device Serial number.
7. Type out the “key” in the Revolutionary tool software, keeping in mind the upper and lower case letters and press enter (you can copy / paste the key).
8. Revolutionary should start doing its job and you’ll get S-OFF in less than 90 seconds.
9. If it takes longer, just wait for the 15 minutes mark, if nothing, then reboot phone and retry.
(Some members got S-OFF after multiple tries)
Now, to get to actually rooting the phone by installing clockworkmod and subsequently, the superuser app.
1. Ensure that your SD Card is FAT32 then copy this to the root of your SD card: http://forum.xda-developers.com/attachment.php?attachmentid=548407&d=1300751790
2. Go into HBOOT(switch off phone and switch on while holding down the volume down button) and click yes when it asks you to update
3. Remove the img file from your sd card and add this file: http://bit.ly/su2361ef
4. Go into HBOOT and click Recovery!
5. Click install zip from sdcard (or some thing like that) (Protip: Navigate in the recovery with the trackpad, not the power button!)
6. Click choose zip from sdcard
7. Locate your zip and let it update
8. Boot into your now rooted phone and install ROM Manager from the market.
9. Open ROM manager and Install Clockword Mod recovery (or sth like that) twice in a row (this is important to ensure proper installation)
YOU ARE NOW ROOT!!!!
Optional: Use ROM manager to install CyanogenMod or another ROM of your choosing
this dont work for me i tried many times.... when i try step 2.bat , cmd pops up does a **** load of codes then closes instantly?
gagan313 said:
this dont work for me i tried many times.... when i try step 2.bat , cmd pops up does a **** load of codes then closes instantly?
Click to expand...
Click to collapse
Firstly, were you even on HBOOT version 1.01.0002?
If you were, check if the downgrade was successful after running step2.bat
If it wasn't make sure HTC Sync has been uninstalled but the drivers have not
If the drivers are in place, I suggest looking for a solution at the orginal guide found at http://forum.xda-developers.com/showthread.php?t=1145035
nope i have 1.01.0002 and step 1 does its stuff no problem then goldcard automatically starts up no problem with that and i patched it and everything then step2.bat comes up and starts downgrade but like its doing a bit and just closes instantly back to hboot still showing s-on 1.01.0002????
i h ave windows 7 ultimate 64 bit../??? any help?
gagan313 said:
nope i have 1.01.0002 and step 1 does its stuff no problem then goldcard automatically starts up no problem with that and i patched it and everything then step2.bat comes up and starts downgrade but like its doing a bit and just closes instantly back to hboot still showing s-on 1.01.0002????
i h ave windows 7 ultimate 64 bit../??? any help?
Click to expand...
Click to collapse
Try making a new goldcard and try again.
And are you sure USB debugging is on?
i did.... but i just need to know..
does it work on windows vista 32 bit or windows 7 64 bit or like linux 64 bit.??
please watch this and please tell me if im doing anything wrong......
http://www.youtube.com/watch?feature=player_embedded&v=e7N1XIkdG2M
p.s sorry for poor quality...;(
gagan313 said:
please watch this and please tell me if im doing anything wrong......
http://www.youtube.com/watch?feature=player_embedded&v=e7N1XIkdG2M
p.s sorry for poor quality...;(
Click to expand...
Click to collapse
The first instruction tells you to switch off the phone before removing the SD card.
Try it again.
If it doesnt work, run everything as administrator, else, go to the orginal thread and post your problems there
im running it on windows 7 ultimate 64 bit??? does that make any difference??/
gagan313 said:
im running it on windows 7 ultimate 64 bit??? does that make any difference??/
Click to expand...
Click to collapse
Shouldn't.... but I did it on a XP 32 bit so maybe you could try running in compatibility mode...
i tried that but no luck..... i also tried on my windows vista 32bit with no luck
Finally got this process to work for me after numerous unsuccessful attempt. Main problem was I was using Win7. Switched to Win 3.1 and things worked.
Also in the guide the step
7. Copy the CID code from the text box
Need to me clarified to ... "Copy the reversed CID code from the text box "
After that all good and am now back on Hboot 1.01.0001.
Thanks for the guide.
Like a charm. Thanks.
Thanks for the information
CWM Issue
Hi,
I need help regarding clock work mod recovery.....
I have rooted my phone successfully bt I am facing issue with CWM ie whenever I am trying to go to recovery-> install zip from sd card, my card contents doesn't pop up, instead only the symbol of CWM is displayed...
please help..
Rahul2929 said:
Hi,
I need help regarding clock work mod recovery.....
I have rooted my phone successfully bt I am facing issue with CWM ie whenever I am trying to go to recovery-> install zip from sd card, my card contents doesn't pop up, instead only the symbol of CWM is displayed...
please help..
Click to expand...
Click to collapse
make sure that you're using the proper controls...:
After boot you select items by vol keys and choose by hitting the power button.
In CWM you also select by vol keys but choose by hitting trackball
Have you done so?
thank u very much it did work....
bt I am stuck with a new issue....I was installing a custom rom and my phone is stuck in the htc window and is not booting up.
can u recommend any solution for it..
Rahul2929 said:
thank u very much it did work....
bt I am stuck with a new issue....I was installing a custom rom and my phone is stuck in the htc window and is not booting up.
can u recommend any solution for it..
Click to expand...
Click to collapse
At first boot it might take a while to boot up. If it remains stuck on the logo I'd suggest to reinstall but do a "full wipe/factory reset" from inside ClockworkMod (even better format system and data before).
BTW Which ROM are you trying to install?
Thank u very much for ur help....I appreciate u people very much....
Bt actually that rom was not good that's y I was facing that issue
Sent from my HTC Wildfire S A510e using xda premium
IF YOU HAVE PROBLEMS WITH CMD and are on Windows 7 (or similar), make sure you start CMD in admin mode.
Otherwise it doesn't work.
1- Make sure the files are stored in a folder in C:\ (or somewhere very short unless you know command line). For example: C:\goldcard
Copy the files from the folder they came in and throw them in there.
2- Go to start and write CMD. Now DO NOT single click the program or type enter. Instead do CONTROL+SHIFT+ENTER
This opens it in Admin mode. (some pop up confirmation may appear).
3- Navigate to the folder by writing "cd C:\goldcard". (Without the quotation marks of course. Use the name of the folder you created in step number one.)
4- write step1.bat
That should do it. The same applies to step2.
Hi guys, I saw that so much people have problem with SmartQ Z1 Lite. However, after few days watch becomes slow and it just have bootloop. I had same problem for weeks, until I found a way to fix it.
Notice! This tutorial is for LITE verrsion only, full version have it's own unbrick tool.
- Download the tools from attachment (end of thread)
- Make new folder on desktop and extract the downloaded .zip to that folder
1. STEP Entering the nexus
- Turn off the watch, make sure that is completely off (plug in the usb cable and check if your machine detects it)
- After that plug in usb cable and press the Power and Back button on watch together for few seconds, your PC will detect it as USB boot device or something
- Go to device manager and right click on that device and update driver software, browse computer and then Let me pick the button..
Click on All devices and then Have disk, browse to the tool folder and 32/64 bit usb driver and choose ini file
Install that driver.
- Unplug usb cable
2. STEP Preparing the savior
- Open TabControl.exe and right click on anywhere on tool, and then click Config
- Click on Import config and find the folder you extracted tool, then folder "ini" and choose the Jz4775--Nand-FINAL.ini
- Then click Manual config and where is uboot on the right "..." browse for the x-boot-nand.bin
- For uimage choose recovery.img
- And then click OK, and don't save the config
3. STEP Let the battle begins
- Plug in USB cable and the tool should start flashing new recovery
- Wait few minutes and it should write Successfull
- After that watch should turn off, unplug and plug in cable again
- Hold the power button for few seconds until you get a charging interface, press back button and hold, and then power button and hold untill it vibrates
- You should see factory upgrade interface and new removable disc should be in computer
- Copy the update.zip from required_flash_files/ folder to new removable disc.
- Now press the back button, and then again where is "Upgrade", your watch should get upgraded
Aaand voilaa!
DOWNLOAD
https://mega.co.nz/#!YBhzyJoY!yfIpdySc_NQDaBHEBPB0kY1yn81IxpKQzARO3B2U1OQ
i need a mirror link
Somebody do this?
is it working?
csonti02 said:
Somebody do this?
is it working?
Click to expand...
Click to collapse
I've sent you the mirror, as soon as i get more posts, i'll edit the thread with mirror.
link
https: //mega.co.nz/#!YBhzyJoY!yfIpdy...pKQzARO3B2U1OQ
HarisDev said:
I've sent you the mirror, as soon as i get more posts, i'll edit the thread with mirror.
Click to expand...
Click to collapse
---------- Post added at 10:26 PM ---------- Previous post was at 10:08 PM ----------
it is working. I try many times (3) but after working (write sacesfull) after i updated 1.5 and work.
many thanks.
csonti02 said:
https: //mega.co.nz/#!YBhzyJoY!yfIpdy...pKQzARO3B2U1OQ
Click to expand...
Click to collapse
Please send me a mirror I have had my watch shelved since March. You've just given me new hope.
siakgayyem said:
Please send me a mirror I have had my watch shelved since March. You've just given me new hope.
Click to expand...
Click to collapse
https://mega.co.nz/#!YBhzyJoY!yfIpdy...pKQzARO3B2U1OQ
Wow this method works. thank you very much. My watch has successfully booted at last since it started to bootloop last march. Harisdev you are a miracle worker. Csonti02 thanks for the link. Both you guys saved me a lot of money (which I dont have much) I was already contemplating on returning the watch to china for repairs. I can not thank you enough.
siakgayyem said:
Wow this method works. thank you very much. My watch has successfully booted at last since it started to bootloop last march. Harisdev you are a miracle worker. Csonti02 thanks for the link. Both you guys saved me a lot of money (which I dont have much) I was already contemplating on returning the watch to china for repairs. I can not thank you enough.
Click to expand...
Click to collapse
the wizard is harisdev ))))) thanks.
Yay.. glad to see that this helped to you guys.
If anyone needs help, feel free to post reply.
Perfect work! Now hold still trying to get to work with the latest update.
Any help for that i cannot get bluetooth on in lite ?
Tohelo said:
Perfect work! Now hold still trying to get to work with the latest update.
Any help for that i cannot get bluetooth on in lite ?
Click to expand...
Click to collapse
Hi Tohelo, thanks.
Try to download update.zip version 1.3 from official site (Click here!) and update by system upgrade. If u don't know how to, please tell me so I can write tutorial.
HarisDev said:
Hi Tohelo, thanks.
Try to download update.zip version 1.3 from official site (Click here!) and update by system upgrade. If u don't know how to, please tell me so I can write tutorial.
Click to expand...
Click to collapse
Yeah I've done that and the installation is successful but now I have a problem that I can not get bluetooth turned on
Tohelo said:
Yeah I've done that and the installation is successful but now I have a problem that I can not get bluetooth turned on
Click to expand...
Click to collapse
I will see tomorrow, i have some tasks to do..
really need help
HarisDev said:
Hi guys, I saw that so much people have problem with SmartQ Z1 Lite. However, after few days watch becomes slow and it just have bootloop. I had same problem for weeks, until I found a way to fix it.
Notice! This tutorial is for LITE verrsion only, full version have it's own unbrick tool.
- Download the tools from attachment (end of thread)
- Make new folder on desktop and extract the downloaded .zip to that folder
1. STEP Entering the nexus
- Turn off the watch, make sure that is completely off (plug in the usb cable and check if your machine detects it)
- After that plug in usb cable and press the Power and Back button on watch together for few seconds, your PC will detect it as USB boot device or something
- Go to device manager and right click on that device and update driver software, browse computer and then Let me pick the button..
Click on All devices and then Have disk, browse to the tool folder and 32/64 bit usb driver and choose ini file
Install that driver.
- Unplug usb cable
2. STEP Preparing the savior
- Open TabControl.exe and right click on anywhere on tool, and then click Config
- Click on Import config and find the folder you extracted tool, then folder "ini" and choose the Jz4775--Nand-FINAL.ini
- Then click Manual config and where is uboot on the right "..." browse for the x-boot-nand.bin
- For uimage choose recovery.img
- And then click OK, and don't save the config
3. STEP Let the battle begins
- Plug in USB cable and the tool should start flashing new recovery
- Wait few minutes and it should write Successfull
- After that watch should turn off, unplug and plug in cable again
- Hold the power button for few seconds until you get a charging interface, press back button and hold, and then power button and hold untill it vibrates
- You should see factory upgrade interface and new removable disc should be in computer
- Copy the update.zip from required_flash_files/ folder to new removable disc.
- Now press the back button, and then again where is "Upgrade", your watch should get upgraded
Aaand voilaa!
My watch is working and everynotification works but theres a problem where it says the application smartwatchlauncher stopped workig so i cant do anything including accessing settings but i get notifications and i cannot upgrade how will i fix this
Click to expand...
Click to collapse
http://www.smartdevices.com.cn/support/download/Zwatchqc/FirmWare/z1litev1.5.html
Download this and flash update.zip
its asking for a decryption key what is it also my computer wont dowload the other one because it says it a virus
Hi,
I'm having trouble in the last point of the first step.
I can only choose inf files, not ini files.
I am pretty sure i am following the steps right but i get stuck on that part.
HarisDev said:
Yay.. glad to see that this helped to you guys.
If anyone needs help, feel free to post reply.
Click to expand...
Click to collapse
Hi,
I'm having trouble in the last point of the first step.
I can only choose inf files, not ini files.
I am pretty sure i am following the steps right but i get stuck on that part.
Greetings everyone,
Two days ago my Leeco x727 was bricked, The phone is in a bootloop, can't enter recovery and only fastboot is working.
I successfully did all the steps on this thread and still can't boot the phone or enter recovery :
https://forum.xda-developers.com/le-pro3/how-to/guide-unbrick-le-pro3-tested-t3622340
In the latest version of Qfil, under the tools menu there's an option called "get flash information", I put the phone in EDL mode and click that option and in the output I can see these messages :
11:27:20: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke '
11:27:20: INFO: TARGET SAID: 'GetStorageInfo Failed - Hotplug's storage_device_get_info() returned FALSE'
11:27:20: INFO: TARGET SAID: 'ERROR 14: Line 1271: HANDLE_STORAGE_INFO_FAILURE'
This means that the phone storage is damaged?
First, what steps did you take to get into the situation?
Second, if you followed the OP of the QFIL MODE]Unbrick your Le Pro3, tested and working page, its out of date. Always go to the end of the thread and read back a few pages. That First page has not been updated and its hosting a corrupt Qfil. If you were bricked you would want to use : le_zl1_qfil_ufs_fix.zip Which I posted on that that thread along with several extensive post with all of the instructions you would ever need to repair a brick.
However, you are do not have a bricked phone. You loaded the wrong version of Twrp and do not have a recovery...right? Whas the full name of the Twrp file that you flashed?
The fact that you can get to fastboot means that you are not bricked, you need to flash the correct Twrp and Root ( Try installing these first, then see if you can boot to recovery before doing anything else.
TWRP: https://dl.twrp.me/zl1/twrp-3.2.3-0-zl1.img.html
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Still having trouble, Try the All in One tool, to flash Twrp and Root, you can use it to fully restore phone.
TOOL ALL IN ONE
If your device not recognized is a usb driver issue, and You will need to reinstall the Google USB driver, and while you are at it check to make sure adb is up to date.
Easy Way to do this with one tool
You have encrypted you drive. The best way to resolve this is to start over.
@mauronofrio built an excellent tool for keeping your drivers and adb up to date. Plus it will give ADB system wide privileges.
Mauronofrio's tool is called: "TOOL ALL IN ONE"" and it's great and will unencrypt your drive.
After you install it, make sure to check for AIT updates.
Get it here:*https://toolaio.tk**
XDA page for Le pro 3 : https://forum.xda-developers.com/le...auronofrio-t3580611/post71627491#post71627491
XDA Main Page:*https://forum.xda-developers.com/le-pro3/development/tool-tool-one-mauronofrio-t3580611
* The all is one tool is excellent and you can use it to install everything you want.
* You can use it to unlock the bootloader.
* Remove Encryption
* Install TWRP,
* Install your Rom, Gapps and Magisk etc.
* The tool will also update your existing installation of ADB, Android Drivers, and provide system wide ADB privileges.
___________________ ___________________ ___________________ ___________________
TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)
* If the issue is related to drivers or software on the windows side, this should resolve it.
* Make your that you give it Firewall privileges, so you can ensure its up to date.
* Try another USB C cable if you still have an issue
Worst Case : You are actually Bricked: ( Highly Unlikely)
Use this Qfil: https://androidfilehost.com/?w=files&flid=244213
I was playing a game on the phone, then it froze up and after a few seconds it rebooted itself and entered in a bootloop, adb and twrp
didn't work and I was using official lineage 15.1 and the phone was rooted.
I did read all the thread until the end and I used the file le_zl1_qfil_ufs_fix.zip that you referenced, also after the procedure I flashed the latest twrp that I downloaded from this page https://dl.twrp.me/zl1/ but still can't enter TWRP.
I followed your instructions and used the option "erase all data/decrypt internal storage" in tool all in one and after that I repeated the QFIL process successfully but still the same situation.
What else can I do?
tsongming said:
First, what steps did you take to get into the situation?
Second, if you followed the OP of the QFIL MODE]Unbrick your Le Pro3, tested and working page, its out of date. Always go to the end of the thread and read back a few pages. That First page has not been updated and its hosting a corrupt Qfil. If you were bricked you would want to use : le_zl1_qfil_ufs_fix.zip Which I posted on that that thread along with several extensive post with all of the instructions you would ever need to repair a brick.
However, you are do not have a bricked phone. You loaded the wrong version of Twrp and do not have a recovery...right? Whas the full name of the Twrp file that you flashed?
The fact that you can get to fastboot means that you are not bricked, you need to flash the correct Twrp and Root ( Try installing these first, then see if you can boot to recovery before doing anything else.
TWRP: https://dl.twrp.me/zl1/twrp-3.2.3-0-zl1.img.html
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Still having trouble, Try the All in One tool, to flash Twrp and Root, you can use it to fully restore phone.
TOOL ALL IN ONE
If your device not recognized is a usb driver issue, and You will need to reinstall the Google USB driver, and while you are at it check to make sure adb is up to date.
Easy Way to do this with one tool
You have encrypted you drive. The best way to resolve this is to start over.
@mauronofrio built an excellent tool for keeping your drivers and adb up to date. Plus it will give ADB system wide privileges.
Mauronofrio's tool is called: "TOOL ALL IN ONE"" and it's great and will unencrypt your drive.
After you install it, make sure to check for AIT updates.
Get it here:*https://toolaio.tk**
XDA page for Le pro 3 : https://forum.xda-developers.com/le...auronofrio-t3580611/post71627491#post71627491
XDA Main Page:*https://forum.xda-developers.com/le-pro3/development/tool-tool-one-mauronofrio-t3580611
* The all is one tool is excellent and you can use it to install everything you want.
* You can use it to unlock the bootloader.
* Remove Encryption
* Install TWRP,
* Install your Rom, Gapps and Magisk etc.
* The tool will also update your existing installation of ADB, Android Drivers, and provide system wide ADB privileges.
___________________ ___________________ ___________________ ___________________
TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)
* If the issue is related to drivers or software on the windows side, this should resolve it.
* Make your that you give it Firewall privileges, so you can ensure its up to date.
* Try another USB C cable if you still have an issue
Worst Case : You are actually Bricked: ( Highly Unlikely)
Use this Qfil: https://androidfilehost.com/?w=files&flid=244213
Click to expand...
Click to collapse
antarusch said:
I was playing a game on the phone, then it froze up and after a few seconds it rebooted itself and entered in a bootloop, adb and twrp
didn't work and I was using official lineage 15.1 and the phone was rooted.
I did read all the thread until the end and I used the file le_zl1_qfil_ufs_fix.zip that you referenced, also after the procedure I flashed the latest twrp that I downloaded from this page https://dl.twrp.me/zl1/ but still can't enter TWRP.
I followed your instructions and used the option "erase all data/decrypt internal storage" in tool all in one and after that I repeated the QFIL process successfully but still the same situation.
What else can I do?
Click to expand...
Click to collapse
This is an issue probably being caused by Windows - Try turning off signed driver enforcement, then start completely over.
https://ph.answers.acer.com/app/ans...windows-10:-disable-signed-driver-enforcement
I copied pasted my previous instructions to some else that had a similar issue.
If you are on Windows 10,*
you may need to turn off antivirus, and all the block-ware that Microsoft has installed within Defender which may delete files or neuter files by removing some files.
Go through your settings and make sure under apps >>apps and features>> the dropdown box installing apps and turn off installing apps from store only.
Go to Apps & features in Settings.
Under “Installing apps,” there is a drop-down menu with three options: make sure “Allow apps from anywhere” is on.
Although the Qfil tool is used universally to repair all Qualcomm boards. Windows 10 may cause issue and disable functions that allow root level changes to your attached device. Yes, this will flag Windows Defender
Defender
* Open Windows Defender Security Center from your Start menu, desktop, or task-bar.
* Click on the App and browser control button on the left side of the window.
* Check Off in the Check apps and files section.
* Make sure that Defender and any other antivirus or malware blocker is turned off.
* Unfortunately, from now on you will always need to turn these things off if you are installing drivers or programs that did not come from Windows store.
* Make sure all defender settings are toggled off.
* Turn off the controlled folder access .
Worst case: Other potential ways to resolve
Enable developer mode :*https://docs.microsoft.com/en-us/win...or-development
You can return everything back to normal after you unbrick your phone.
The link below explains how to resolve additional potential issues caused by the Microsoft OS,
https://flashfiletool.com
The full setup option, on this page will download all drivers ( download only if needed) its a list of software for all supported Leeco phones, with alternate repair tools. Ensure that any software downloaded matches the specs of your device.
Hopefully, this finally resolve it for you. I created a comprehensive list of instructions for every scenario Please let me know what works for you so we can post a set of instructions to help others with the same issue.
Ok, I disabled signed driver enforcement, turned off windows defender and repeated the Qfil procedure.
The Qfil completed successfully without errors but still the same issue,
I read somewhere that some people had success with Qualcomm devices using the Miflash tool, I tried to use this tool but it ask for a file called "provision_hynix.xml", that file is inside the file le_zl1_qfil_ufs_fix.zip but when I opened it there's a disclaimer that says "WARNING: PROVISIONING UFS IS A IRRECOVERABLE ONE TIME OPERATION SO EXTREME CARE MUST BE TAKEN TO ENSURE THE PARAMETERS IN THIS CONFIGURATION FILE MEETS THE END PRODUCT" so I got afraid and didn't proceed further.
tsongming said:
This is an issue probably being caused by Windows - Try turning off signed driver enforcement, then start completely over.
https://ph.answers.acer.com/app/ans...windows-10:-disable-signed-driver-enforcement
I copied pasted my previous instructions to some else that had a similar issue.
If you are on Windows 10,*
you may need to turn off antivirus, and all the block-ware that Microsoft has installed within Defender which may delete files or neuter files by removing some files.
Go through your settings and make sure under apps >>apps and features>> the dropdown box installing apps and turn off installing apps from store only.
Go to Apps & features in Settings.
Under “Installing apps,” there is a drop-down menu with three options: make sure “Allow apps from anywhere” is on.
Although the Qfil tool is used universally to repair all Qualcomm boards. Windows 10 may cause issue and disable functions that allow root level changes to your attached device. Yes, this will flag Windows Defender
Defender
* Open Windows Defender Security Center from your Start menu, desktop, or task-bar.
* Click on the App and browser control button on the left side of the window.
* Check Off in the Check apps and files section.
* Make sure that Defender and any other antivirus or malware blocker is turned off.
* Unfortunately, from now on you will always need to turn these things off if you are installing drivers or programs that did not come from Windows store.
* Make sure all defender settings are toggled off.
* Turn off the controlled folder access .
Worst case: Other potential ways to resolve
Enable developer mode :*https://docs.microsoft.com/en-us/win...or-development
You can return everything back to normal after you unbrick your phone.
The link below explains how to resolve additional potential issues caused by the Microsoft OS,
https://flashfiletool.com
The full setup option, on this page will download all drivers ( download only if needed) its a list of software for all supported Leeco phones, with alternate repair tools. Ensure that any software downloaded matches the specs of your device.
Hopefully, this finally resolve it for you. I created a comprehensive list of instructions for every scenario Please let me know what works for you so we can post a set of instructions to help others with the same issue.
Click to expand...
Click to collapse
antarusch said:
Ok, I disabled signed driver enforcement, turned off windows defender and repeated the Qfil procedure.
The Qfil completed successfully without errors but still the same issue,
I read somewhere that some people had success with Qualcomm devices using the Miflash tool, I tried to use this tool but it ask for a file called "provision_hynix.xml", that file is inside the file le_zl1_qfil_ufs_fix.zip but when I opened it there's a disclaimer that says "WARNING: PROVISIONING UFS IS A IRRECOVERABLE ONE TIME OPERATION SO EXTREME CARE MUST BE TAKEN TO ENSURE THE PARAMETERS IN THIS CONFIGURATION FILE MEETS THE END PRODUCT" so I got afraid and didn't proceed further.
Click to expand...
Click to collapse
I haven't used it, and I a not sure how USF memory is configured on the Le Pro 3. You could try using the QPST tool. I have not used it either but I have read that its great for difficult to repair bricks..
You did try the QPST
https://mytabletguru.com/how-to-flash-qualcomm-cpu/
Using this version for Snapdragon
https://www.androidbrick.com/download/download-latest-qualcomm-flasher-qfil-qpst-2-7-460/
Try one one thing first, before QPST:
Try using using the Flash 2.0 program to the official stock rom preferable Leeco 5.8.26s get it here: https://drive.google.com/file/d/0BwRnZl5YW8NmbEtjX2dOSUExWlk/view
If all else fails :
Here is a general guide from the 4PDA website: https://4pda.ru/forum/index.php?showtopic=643084&st=275
Use will need to use Google Chrome with the Translate program installed.
The 4PDA link has a section that covers the general repair of UFS corruption.
Again, something that I haven't dealt with. I would use this a worst case scenario.
Have you tried switching usb c cables?
Have you tried an edl cable?
You can find them on Amazon for cheap.