Related
Hey guys whats going on, Well Looking for a new case for my galaxy s5.
What do you guys recommend?????
Right now I have a OtterBox Defender case, it is a lil Big and already Broke on me, and the Silicone also has ripped.
Trying to see what everyone is using and what has the best protection. Im a construction worker so I like sumthing really durable. Thanks guys
UAG.
i also have the otterbox but i think it's horrible.. makes the phone twice as thick and much bigger.
now i ordered the ringke slim case, i also had a ringke on my nexus 4 and that one was fantastic.
Might want to check out thewirecutter's guide (no link because I'm new )
thewirecutter.com/reviews/best-samsung-galaxy-s5-cases/
Spigen
Slim Armor
Spigen
Yeah I was looking at the spigen tough armor. Looks good. But I also want something to protect the Glass of the phone.
Why would you 50$ for a phone case? On chinese webshops you can get cases like those for around 3-7$. They may not be of the same quality but in combination with a tempered glass protector you will get protection of around the same level!
Just purchased the Pursuit for the s9+ and I've used it for about a day. I tried both the defender and the pursuit before going with the pursuit.
The reasons on why I chose the pursuit are the size, durabilty and tempered glass fitment.
The pursuit is slightly thinner thickness wise and width wise but slightly taller height wise. Thickness we're talking a couple(2-3) millimeters. Width wise it was much more noticeable because I had an easier time holding the phone with one hand.
I've used the defender series before for my s4, s5 and s7 edge. The defender comes in 3 separate pieces(excluding holster) and the pursuit is 2 pieces but no holster. The two pieces for the pursuit are a back piece with the 4 walls and a thin plastic "outer" piece that holds the phone around the outer edges to the bottom piece. The back piece is made of hard plastic on the back with the 4 walls(top bottom sides) made of hard rubber. The rubber is the slippery kind of rubber and the plastic is extra slippery.
The defender is slightly different. It has 2 inner plastic pieces that secure the phone and a thick rubber outer shell that goes around the plastic shell. The defenders I've used for previous galaxies the rubber would always start loosening up after you put on/remove the case several times. You won't have that issue with the pursuit.
Both cases have similar coverage over the edges so size wise any glass screen protector that fits either one should fit the other. But I feel the pursuit will be able to fit larger glass screen protectors by tucking them under the plastic outer cover. The defender has small latches on the the plastic inner shell that needs to be latched.
I'll be buying a glass screen protector this week for my s9+ this week so I'll know for sure if it fits on the pursuit.
I'll upload pics of the pursuit when I get home.
You can Google galaxy s9 pursuit and there should be a 1 min video from otterbox themselves to get the jist of the case.
The defender is $60 and the pursuit is $80.
Screen Protector
rlatjs17 said:
Just purchased the Pursuit for the s9+ and I've used it for about a day. I tried both the defender and the pursuit before going with the pursuit.
The reasons on why I chose the pursuit are the size, durabilty and tempered glass fitment.
The pursuit is slightly thinner thickness wise and width wise but slightly taller height wise. Thickness we're talking a couple(2-3) millimeters. Width wise it was much more noticeable because I had an easier time holding the phone with one hand.
I've used the defender series before for my s4, s5 and s7 edge. The defender comes in 3 separate pieces(excluding holster) and the pursuit is 2 pieces but no holster. The two pieces for the pursuit are a back piece with the 4 walls and a thin plastic "outer" piece that holds the phone around the outer edges to the bottom piece. The back piece is made of hard plastic on the back with the 4 walls(top bottom sides) made of hard rubber. The rubber is the slippery kind of rubber and the plastic is extra slippery.
The defender is slightly different. It has 2 inner plastic pieces that secure the phone and a thick rubber outer shell that goes around the plastic shell. The defenders I've used for previous galaxies the rubber would always start loosening up after you put on/remove the case several times. You won't have that issue with the pursuit.
Both cases have similar coverage over the edges so size wise any glass screen protector that fits either one should fit the other. But I feel the pursuit will be able to fit larger glass screen protectors by tucking them under the plastic outer cover. The defender has small latches on the the plastic inner shell that needs to be latched.
I'll be buying a glass screen protector this week for my s9+ this week so I'll know for sure if it fits on the pursuit.
I'll upload pics of the pursuit when I get home.
You can Google galaxy s9 pursuit and there should be a 1 min video from otterbox themselves to get the jist of the case.
The defender is $60 and the pursuit is $80.
Click to expand...
Click to collapse
I just upgraded from the Galaxy S6 Active to the S9+. I found your post right after I received my new phone and have been waiting for your update. I'm trying to decide on a screen protector that is compatible with the pursuit. I'm very particular on screen protectors and don't want to waste money on one I'm not happy with.
My only concern with the pursuit is the compatibility of screen protectors. Otterbox advertises the alpha glass as it is made to work with their cases and with some research I've done reading in other forums it seems that some screen protectors will break when putting the pursuit case on. I'm not sure if I want the alpha glass because it has been reviewed poorly and there is no mention that alpha glass has an oleophobic coating.
Just curious on what screen protector you go with and how it fits with your pursuit case.
Also thanks for your first post! It helped me decide on getting the pursuit myself. I was worried it wasn't worth the steep price but I'm very happy with it.
millertyme1990 said:
I just upgraded from the Galaxy S6 Active to the S9+. I found your post right after I received my new phone and have been waiting for your update. I'm trying to decide on a screen protector that is compatible with the pursuit. I'm very particular on screen protectors and don't want to waste money on one I'm not happy with.
My only concern with the pursuit is the compatibility of screen protectors. Otterbox advertises the alpha glass as it is made to work with their cases and with some research I've done reading in other forums it seems that some screen protectors will break when putting the pursuit case on. I'm not sure if I want the alpha glass because it has been reviewed poorly and there is no mention that alpha glass has an oleophobic coating.
Just curious on what screen protector you go with and how it fits with your pursuit case.
Also thanks for your first post! It helped me decide on getting the pursuit myself. I was worried it wasn't worth the steep price but I'm very happy with it.
Click to expand...
Click to collapse
I'm waiting for a $20 generic whitestone clone to come in the mail. As of right now I just have a plastic screen protector i bought from Ebay for $10 for a pack of 4.
I was hoping for a full coverage glass screen protector so i can tuck it under the plastic lip since I can fit my finger nail under around the whole phone.
I wish otterbox made the defender with the plastic screen. I took out the plastic screen protector on the s7 edge defender and was able to fit a full coverage glass protector under it without any issue.
rlatjs17 said:
I'm waiting for a $20 generic whitestone clone to come in the mail. As of right now I just have a plastic screen protector i bought from Ebay for $10 for a pack of 4.
I was hoping for a full coverage glass screen protector so i can tuck it under the plastic lip since I can fit my finger nail under around the whole phone.
I wish otterbox made the defender with the plastic screen. I took out the plastic screen protector on the s7 edge defender and was able to fit a full coverage glass protector under it without any issue.
Click to expand...
Click to collapse
I just swapped my defender out for the clear pursuit. Defender was too bulky. It was annoying.
$80 case seems just a bit to steep for me.
Sent from my SM-G965U using Tapatalk
I too bought the clear pursuit case.
Pros:
works with Whitestone dome.
The clear back allows your skin to show.
great protection, not too bulky, good grip.
The bottom speaker is directed forward with the built in Port.
The flaps that cover the charging port are not stiff like my past experience with these types of cases.
Cons:
Price, it's too steep imo but it's a quality case.
Tough to put on and take off very often.
neither con or pro:
buttons are stiffer than I like but there won't be any accidental presses.
With this case and the whitestone dome I really feel like I can drop this phone and not worry. Piece of mind is worth the price of the screen protector and case as I don't carry insurance on my phone's.
My 70 year old mom just got this case for her S9+. LOL.
I found this master list of cases that work and do not work with the whitestone dome glass on Reddit. I thought it would be helpful for those here as well! There seems to be a submission form for other cases that people have tested out and whether or not they fit, so it is continually updated.
Hope this helps others as it really stinks to spend so much on that screen protector only to have a case screw it up because it doesn't fit
mod edit - affiliate links list removed
Thanks,
I submitted a couple models that work using the link.
Spigen skin air works perfect with my dome protector ?
Nice! Looks like they were already added.
I pre-ordered the Moment case... it's a gamble.
Did the Moment wind up fitting? I was thinking of getting that with the Dome Glass screen protector as well. Haven't seen it on any of these lists.
I have the Spigen Neo hybrid. I noticed that the corners of the screen have a little gap between the screenprotector and the case. On the sides , the gap isnt noticable.
Is the Samsung Alcantara case definitely compatible? Anyone have this case with the whitestone dome?
redeus said:
Is the Samsung Alcantara case definitely compatible? Anyone have this case with the whitestone dome?
Click to expand...
Click to collapse
Yes I have that case for my S9+ and whitestone dome glass.
Sent from my Samsung SM-G965U1 using XDA Labs
Warning about the Moment case. The bottom 2 lips of the case touch the glass (the sides and top are fine). I don't know if I want to keep it on long enough to see if the bottom of the glass lifts....
Edit: The Moment case is not compatible with the Whitestone.
Your list says the OtterBox Pursuit series does not fit, this is false. I would say it is an exact fit with only a few millimeters of "wiggle room" but it does fit with no glass touching or conflicts with the case.
Anyone tried the Youmaker? https://www.amazon.com/gp/product/B07BMSMFC8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Looks similar to the Unicorn Beetle and was wondering if it worked. I just ordered that and The Unicorn Beetle Hybrid: https://www.amazon.com/gp/product/B079BSJH8M/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Figured Ive never really had a problem except when I had my S7 Edge that the screen shattered twice. Hoping cause its not as curved that itll be less likely to break as long as I have a decent case on it. But still want a screen protector.
Anyone have Vena vArmor case?
https://www.ebay.com/itm/Vena-vArmo...er-Shockproof-Stand-Case-/312153941342?_ul=HR
Poslano sa mog SM-T555 koristeći Tapatalk
https://forum.xda-developers.com/ga...innest-minimalist-case-kevlar-aramid-t3780879
pitaka case also works well
xbmoyx said:
Your list says the OtterBox Pursuit series does not fit, this is false. I would say it is an exact fit with only a few millimeters of "wiggle room" but it does fit with no glass touching or conflicts with the case.
Click to expand...
Click to collapse
It fits with pursuit? Mind sharing pics with it?
Whitestone Dome glass fits Galaxy S9+ perfectly with Incipio Dual Pro case ?
Sent from my Galaxy S9+ using XDA Labs
infamousvincci said:
It fits with pursuit? Mind sharing pics with it?
Click to expand...
Click to collapse
No problem, here ya go. Been installed for almost a month now with no issues, definitely the best combo for overall protection IMO.
xbmoyx said:
No problem, here ya go. Been installed for almost a month now with no issues, definitely the best combo for overall protection IMO.
Click to expand...
Click to collapse
I just went with this combo as well. Whitestone said that they haven't had any problems so far with this case so I got it. Now that both are in my hands, it seems initially that it might cause problems... However I don't think the case bezel actually sits fully flush with the glass. There's a soft, flexible barrier used to keep dust out, and I think this is what keeps the comparability. I can try posting a picture if needed but from what I'm reading around I haven't seen anybody claiming incompatibility with the Pursuit so far.
Of course, I just installed my Dome today so I'll let you guys know how the pursuit goes for me.
EDIT: Fits perfectly fine. No part of the case is really touching the glass. Just be careful when putting the case on is all.
Radboy16 said:
I just went with this combo as well. Whitestone said that they haven't had any problems so far with this case so I got it. Now that both are in my hands, it seems initially that it might cause problems... However I don't think the case bezel actually sits fully flush with the glass. There's a soft, flexible barrier used to keep dust out, and I think this is what keeps the comparability. I can try posting a picture if needed but from what I'm reading around I haven't seen anybody claiming incompatibility with the Pursuit so far.
Of course, I just installed my Dome today so I'll let you guys know how the pursuit goes for me.
Click to expand...
Click to collapse
Yes it seems like the case come close to the screen, but there is a gap with a barrier which is raised off the glass letting the WhiteStone dome fit.
I have Spigen Liquid Armor, Slim Armor, Ultra Hybrid Clear, and Air Skin.
I'm very sure Air Skin can fit, and also Slim Armor cannot fit.
I need to verify Liquid Armor and Ultra Hybrid can fit. Anyone also using the same type?
Master list indicate Liquid Armor cannot fit, and Ultra Hybrid can fit. But I need a review from the users direct if there's any.
Looking to order a compatible case with Whitestone dome glass. Looking for something that doesn’t sit right on top of the glass, just in case it pushes it up when in and out of the pocket and bag
Spigen. Using it with Whitestone. No issues.
Serpentinefire76 said:
Spigen. Using it with Whitestone. No issues.
Click to expand...
Click to collapse
Which spigen case?
I would hazard a guess that all. Except of course the ones that come with screen protector
Sent from my SM-G965F using Tapatalk
Serpentinefire76 said:
I would hazard a guess that all. Except of course the ones that come with screen protector
Sent from my SM-G965F using Tapatalk
Click to expand...
Click to collapse
Not at all true. There are threads here with lists in them
Sent from my SM-G965U1 using Tapatalk
The rugged armor supposedly doesn't fit, which is a shame as i was using that one on each and every one of my smartphones. The tough armor fits perfectly though, and i am quite happy with it. The kickstand might be useful but doesn't seem to be that robust. Time will tell.
Another favorite of mine was the ringke onyx case. That one does not fit.
I've used the Spigen Neo Hybrid in the past and currently the UAG Monarch with the Whitestone and have had zero issues.
Ati75 said:
The rugged armor supposedly doesn't fit, which is a shame as i was using that one on each and every one of my smartphones. The tough armor fits perfectly though, and i am quite happy with it. The kickstand might be useful but doesn't seem to be that robust. Time will tell.
Another favorite of mine was the ringke onyx case. That one does not fit.
Click to expand...
Click to collapse
That's weird. The ringke onyx fit my s9+ perfectly.
tsuchiro said:
That's weird. The ringke onyx fit my s9+ perfectly.
Click to expand...
Click to collapse
I meant in combination with the whitestone dome glass. The upper lipp was just sitting too tight. I didn't want to risk the glass to peel up, so i deemed it as unfit.
You should have a look at this list, made for S9/S9+: https://docs.google.com/spreadsheets/d/11upU3Lh5bIZl3rPAoN23gCxBDU6MwkNZyEzY01HLUeE
Unfortunately, even if one case from company works, it doesn't mean that the rest are compatible. There are even cases of the same lineup (Spigen Ultra Hybrid) which are compatible and others aren't. In my opinion, if you want an ultra-thin case, then the Torras is the best bet. The Spigen Neo Hybrid is great (got one) for slim ---but adequate- protection. If you want the best protection possible, you should be looking at the UAG Monarch (expensive) or Otterbox Symmetry & Strada
Personally, I gave up on the Whitestone and now got myself an Otterbox Strada. Partly due to VR compatibility (I do AI research and now working on a VR project) and partly due to installation problems; once with the phone sitting tool was weirdly tight (compare to the 2nd kit I got) for the phone and the other it was my fault. Also, I got tired to looking for cases that are compatible. VR
I used that list posted above and this has been my experience so far.
I can confirm that UAG Plasma will push on the Whitestone.
The Spigen Neo Hybrid does work with Whitestone, but there's very little separation between case and Whitestone. The case does extend past the added thickness of the glass, so it will protect the Whitestone if placed face down.
Samsung Alcantara case doesn't seem to push the Whitestone despite seemingly touching. Perhaps the alcantara fibers makes it look worse than it actually is, but I didn't want to take the risk.
I'm currently using a Tech21 Evo Tactical and it gives the largest space to the Whitestone than any of the previous covers above. It's also a very thin case, yet has great drop protection. Lastly, this case provides more face down protection than the Neo Hybrid.
I went with the tech21 evo tactical due to @coiledwire post above
coiledwire said:
I used that list posted above and this has been my experience so far.
I can confirm that UAG Plasma will push on the Whitestone.
The Spigen Neo Hybrid does work with Whitestone, but there's very little separation between case and Whitestone. The case does extend past the added thickness of the glass, so it will protect the Whitestone if placed face down.
Samsung Alcantara case doesn't seem to push the Whitestone despite seemingly touching. Perhaps the alcantara fibers makes it look worse than it actually is, but I didn't want to take the risk.
I'm currently using a Tech21 Evo Tactical and it gives the largest space to the Whitestone than any of the previous covers above. It's also a very thin case, yet has great drop protection. Lastly, this case provides more face down protection than the Neo Hybrid.
Click to expand...
Click to collapse
Did you try the tough armor?
mys3 said:
Did you try the tough armor?
Click to expand...
Click to collapse
No, I haven't tried it yet. I'm usually a minimal case user, so UAG Plasma is just about as big as I'd want to go.
coiledwire said:
No, I haven't tried it yet. I'm usually a minimal case user, so UAG Plasma is just about as big as I'd want to go.
Click to expand...
Click to collapse
I've got the whitestone on perfect so in a aged to try other cases in case they disturb it!
mys3 said:
I've got the whitestone on perfect so in a aged to try other cases in case they disturb it!
Click to expand...
Click to collapse
Agreed. My Whitestone install is 99.9% perfect and I don't want a case to mess with it. I'm loving this tech21 case. Its pricy for what it is, but it works really well with the Whitestone, looks nice, and feels solid.
UAG monarch fits really well, plenty of space like the tech21 tactical
Has anyone tried the Griffin Survivor Strong Clear?
I can confirm the Whitestone Dome is compatible with the Griffin Survivor Strong Clear case.
Does anyone know if the mous cases are compatible?
I haven't seen any reviews on the included case with T-Mobile's McLaren edition. Waiting on my McLaren to ship, and I was wondering if I should order a heavier duty case for it. I work in fire/EMS and construction, and I also tend to drop my phone a lot. I currently have a a cheap 2 piece Incipio case on my V30, the one with the soft rubber covered with a hard plastic shell, and I've beat the tar out of it. I've even forgotten it on the bumper of one of our trucks (apx. 2.5ft high), and it fell off in an area we'd have been doing about 45mph through. When we found it using Google's "Find My Phone" thing a couple hours later, it had tread marks across the case and the TGSP was totally shattered. However, my V30 still looks brand new inside the case. I suspect I got incredibly lucky with that though, and wouldn't bet on any case to reliably hold up to something like that. So, barring something catastrophic like that event, will the included case stand up to my rough lifestyle, or should I get a more "rugged" case? Also, semi-related, I've ordered one of the Alinsea almost-full-coverage TGSPs from Amazon. Has anyone tried that one with the included case, and if so, do they play nice together?
The quality of the included case is very good. I work in EMS as well but rarely drop my phone. With the way you describe your work day I would probably get a tougher case. I'm sure the included case would withstand normal falls but I doubt it would do well with significant falls. Hope this helps.
The case is nice, but made for show not toughness. And I've read a post where the user claims the metal from the McLaren logo started to come off and punctured his hand. I think it only offers minimal drop protection.
Got my McLaren, and I'll definitely be getting a different case. It's a shame, considering how slick this included one looks. Also, for anyone interested in the Alinsea TGSP, it's a perfect fit with this case if you line it up perfectly. It's almost entirely invisible, have to look closely to realize there's a screen protector at all. Feels like the unprotected screen too. Any recommendations for a rugged case that looks as nice as the included one?
I'm using the stock case until I find something worth buying on Amazon. Id like a good kickstand case that's 360 protected. The wifeproof case on my pixel XL was awesome.
But even with the stock case, I threw a plate behind it on the back, and I have no issues with the magnetic mount in my car.
Correction, the plate is sitting between the phone and case, with just a piece of tape holding it in place, nothing is seen from the outside.
mmarcz said:
I'm using the stock case until I find something worth buying on Amazon. Id like a good kickstand case that's 360 protected. The wifeproof case on my pixel XL was awesome.
But even with the stock case, I threw a plate behind it on the back, and I have no issues with the magnetic mount in my car.
Correction, the plate is sitting between the phone and case, with just a piece of tape holding it in place, nothing is seen from the outside.
Click to expand...
Click to collapse
Poetic is the closest thing to 360 protection
I have a poetic gaurdian case that does not have a kick stand
Poetic Guardian Series Designed for OnePlus 7T Pro/OnePlus 7 Pro Case, Full-Body Hybrid Shockproof Bumper Cover with Built-in-Screen Protector, Black/Clear https://www.amazon.com/dp/B07ZCBM39X/ref=cm_sw_r_sms_apa_i_Y64fEb3DQ0116
The have another one that has a kick stand poetic revolution
Poetic Revolution Series Designed for OnePlus 7T Pro/OnePlus 7 Pro, Full-Body Rugged Dual-Layer Shockproof Protective Cover with Kickstand and Built-in-Screen Protector, Black https://www.amazon.com/dp/B07ZCC6DZ4/ref=cm_sw_r_sms_apa_i_U74fEb4C5SPSS
toolhas4degrees said:
Poetic is the closest thing to 360 protection
I have a poetic gaurdian case that does not have a kick stand
Poetic Guardian Series Designed for OnePlus 7T Pro/OnePlus 7 Pro Case, Full-Body Hybrid Shockproof Bumper Cover with Built-in-Screen Protector, Black/Clear https://www.amazon.com/dp/B07ZCBM39X/ref=cm_sw_r_sms_apa_i_Y64fEb3DQ0116
The have another one that has a kick stand poetic revolution
Poetic Revolution Series Designed for OnePlus 7T Pro/OnePlus 7 Pro, Full-Body Rugged Dual-Layer Shockproof Protective Cover with Kickstand and Built-in-Screen Protector, Black https://www.amazon.com/dp/B07ZCC6DZ4/ref=cm_sw_r_sms_apa_i_U74fEb4C5SPSS
Click to expand...
Click to collapse
Thank you for the suggestions, I will check them out!
NickWhit1992 said:
Got my McLaren, and I'll definitely be getting a different case. It's a shame, considering how slick this included one looks. Also, for anyone interested in the Alinsea TGSP, it's a perfect fit with this case if you line it up perfectly. It's almost entirely invisible, have to look closely to realize there's a screen protector at all. Feels like the unprotected screen too. Any recommendations for a rugged case that looks as nice as the included one?
Click to expand...
Click to collapse
What brand is your magnetic mount? I tried the same thing with mine, but it barely sticks. Looking for something stronger so I don't have to worry about potholes knocking it off.
Sent from my HD1925 using XDA Labs