Reflash Nougat 7.1.1 - Droid Maxx 2 Q&A, Help & Troubleshooting

I am having some problems that I think are software related due to the recent update to Nougat 7.1.1.
Shortly after updating on 2/15/2018, my Maxx 2 will no longer charge while powered on and when I charge it while powered off it will only charge to around 80%, give or take a couple of percentages. Before I give up on this phone (since from what I am reading, no one has been able to root this phone), I would like to try a reinstall of the software. I have posted on the Lenovo and Verizon forums and I can only find 1 other person that has had this problem, although I don't know if this problem occurred before or after the update.
Can someone on here walk me through the process of doing a reinstall? I am assuming that the installation software is still on my phone somewhere, along with the install command, isn't it?
Thanks in advance!!
RL

Same Issue
I have the same issue on the same phone, issues started after the 7.1.1 update. I am going to try to the Verizon Software Update - Software Upgrade / Repair Assistant (Motorola) and use the repair option and see if that works. You can find the link to it through some searching on an engine. This sounds like it would be the was to reflash the software on the phone.

Used the tool to repair the installation, seems to have reflashed the phone, even went through the bootloader. Also, just finished charging the phone to 100%, with it powered on
Let us hope this works for the long term.

Thanks XD - I'll try the fix and see if I get the same results!!

Well - I tried the software fix 3 times and it didn't work for me. No change at all.
1st attempt I did the suggested re-install.
On the 2nd, I went ahead and did a factory reset install.
3rd try was the suggested install like the first try, but on a factory reset phone.
Thanks for trying!!

Ok

Related

[Q] eLocity just quit...won't boot up

I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
My a7 was running well for about a week since it quit...but today when I booted up device, it failed to recognize sd card...same card used for updating to mod 1.4...same card I've been using to listen to my music, etc...but now won't recognize...I've tried two different micro sdhc cards..formatted, reformatted, but device continues to display mount sd card...all else works fine! Does anyone have any new ideas? I can't even reinstall mod since a7 can't read my cards. Thanks for any input that would be helpful. I understand these issues are ongoing for many out there...what to do?
deepmagic said:
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
Click to expand...
Click to collapse
Mine has hung on a black screen on me. Seemed that it didn't fully come out of sleep mode.
I was able to recover by holding the power button for 15 seconds to hard power down. No data loss.
deepmagic said:
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
Click to expand...
Click to collapse
Exact same thing happened to me this morning. Tried to reset - not happening. Hard powered down. Don't have time to try anything else right now. I'm new to the forums and new to android. Wish me luck! I've been loving my A7, and much appreciation to Dexter and all the other knowledgeable hackers/modders/posters.
hey the same thing happened 2 me twice. Once the first day after i got it, since i had only had it for 1 day i wiped it reinstalled dexter's mod 1.41 and it worked. First app i installed was backup root. Now, a week later the exact same thing is happening. This time i dont want to wipe it because of all of the apps i have installed, games ive played etc. Any ideas? Could we just try reinstalling dexter's md without wiping? Or wiping reinstalling and recover from a backup?
Also have you installed busybox? I had just installed it both times before it failed to turn on. Maybe its just coincidence but you never know..
-D
Thanks to anyone who can help! and also thanks Dexter for all your hard work as well as everyone else that has contributed to the elocity, im lovin it! (when it works )
success!!!!
I got it to work! I don't have a permanent fix but if it happens again just boot into recovery and reinstall the dexter's mod update 1.41 and it works again! No wiping required. This isn't a permanent fix but it will work until we find one
-Dylan
Hasn't happened to me (yet) but I didn't upgrade to the newest ROM. I'm still using 1.3and it has been very stable. Only issue I've had was when I tried to use Killswitch to go to sleep mode when the cover is shut (great idea) but it didn't work and froze all except the live wallpaper. Weird.
Good luck, guys.
in the event it does happen to you, you might want to check out my apx thread for reflashing the factory firmware if you can't get your tablet unstuck. theres alternatives if you don't want to get stuck again.
The method you outline seems so complex...way above my abilities, but makes me wish I had followed though on some early programming training opportunities. That was the road not travelled.
okantomi; while i wouldn't encourage others to follow thru with procedures they fear would cause more harm, i would mention that if you google up my nick you'll find i've been able to do much w/ android software and devices while not knowing anything about programming. if i can do it, anyone can. i just wanted some themes for my phone.
i'm just an android hobbyist by night (and when i get a chance during the day), and a computer tech by day. no programming expertise, but i can reasonably reverse engineer and port software and components using simple file managers like ztreewin(trialware).
don't be mistaken that the folks out there providing you solutions necessarily know anything about programming or software development. just how to chef up files at different levels. i understand this doesn't go for everybody.
Thanks for the encouragement. I'm impressed with what you've been able to do. It is also nice to read upbeat comments about the A7. There is something sort of special about a device that you really almost have to build yourself... putting so much into it... biting your fingernails to nubs with each ROM flashing. You don't get as attached to any device that is 100 percent complete right out of the box, though of course there would be a lot less aggravation.

[Q] N7 4.4 update issues?

Not sure if I'm the only one, and if I am that really sucks, but I got tired of waiting for the OTA and decided to install the update via the fastboot method, unlocked my bootloader installed without a problem.
However the issue now seems to stem from transferring media files to my tablet, which I never had a problem doing, a pop up window will tell me that android.media.storage has stopped, giving me an option to report and to simply tap okay.
Not sure reporting ever does anything, and if it does I've never seen it change a single thing at all, but after I tap okay or send the report, any files transferring will just exit out, then if I unplug my usb and plug it back in, it doesn't seem to recognize the tablet at all.
I've so far remedied this, not sure if it's a permanent fix or temporary, by going into settings>apps>all, then from there tapping the app, clearing data and cache, restarting my tablet with a hard reset and it seems to be working for the moment.
However transferring files since the update are sluggish at best, and taking a 356MB folder of images used to take maybe a few minutes, 5 or 7 at the most, now it's hanging there at times with the transfer time increasing.
As a matter of fact I'm transferring said 356MB folder right now and it's stuck at 10 minutes to finish and hasn't moved for about 10 minutes.
If anybody else is having these problems, can you suggest ways you've fixed it? Or do I simply need to either do a factory reset or straight up flash it again to fix the problem?
Also, I made another article detailing my problems with updating, which I've since fixed obviously, but Recovery Mode isn't anywhere to be found, I do the regular method and before it showed the android with the red triangle and below him it would say no command, now it just shows the android with the same triangle with no wording underneath at all.
I've also re-downloaded the official factory image 4.4 from google's developer site and tried to manually flash recovery onto it, and it says that it succeeded but then when it goes back to fastboot and I choose recovery it loads then shows me the android with the red triangle.
I've even tried downgrading back to 4.3 but it tells me during the rewrite of the bootloader that there's a signature mismatch.
In addition, this should be the last revision to my issue, I've even tried re-flashing 4.4 and now that's kicking back an error saying there's a signature mismatch, so I can't go into recovery, I can't downgrade, I can't flash a recovery image to my tablet, I think I screwed up in ever updating to 4.4.
Im having the same problem with Media Storage when transferring pictures via Android File Transfer on Mac, tried it on Windows also, same problem.
It happens with my Nexus 4 on KitKat also!!
I still havent found a way to fix it, did you (OP) ever find a fix?
Cheers
Stewart
StuMcBill said:
Im having the same problem with Media Storage when transferring pictures via Android File Transfer on Mac, tried it on Windows also, same problem.
It happens with my Nexus 4 on KitKat also!!
I still havent found a way to fix it, did you (OP) ever find a fix?
Cheers
Stewart
Click to expand...
Click to collapse
Nope no fix yet, I haven't tried transferring a large number of files since, oddly enough, I finally did get the OTA update and it installed 4.4 again.
It didn't take long and the file size was puny, only about 32MB, I assume it installed what was missing, but I haven't noticed anything out of the ordinary since the official updated kicked in.
Yeah I have the latest OTA also, but I am still having the same issue!!
StuMcBill said:
Yeah I have the latest OTA also, but I am still having the same issue!!
Click to expand...
Click to collapse
Not really sure why it's different for you, like I said I got tired of waiting for the OTA and manually flashed the factory image, that's when the problems started, but after a few days I got a notification that the new update was ready which really confused me.
But I installed the downloaded update without a hitch, booted like normal and I just finished transferring a 100MB folder of images to my N7 without an error popping up on my tablet saying something crashed, so I can only assume for the moment until I transfer a larger folder, that the DL'd update fixed the problem.
I've also heard people flashing it again, or side loading it, or even a factory reset would fix the problem, but there weren't many replies as to this actually fixing the data transfer problem.
Problem with downloading ota update kitkat 4.4
I have stock rom and waited for the ota update. It came this morning and while downloading twice the verification failed.i rebooted and the screen came up download failed and had a retry button which i tried to activate and does nothing, The screen has been stuck on the return download for over 12 hours. My wifi connection is strong. Any ideas?
manow91 said:
I have stock rom and waited for the ota update. It came this morning and while downloading twice the verification failed.i rebooted and the screen came up download failed and had a retry button which i tried to activate and does nothing, The screen has been stuck on the return download for over 12 hours. My wifi connection is strong. Any ideas?
Click to expand...
Click to collapse
Take anything I say with a grain of salt as I'm not the greatest guy to ask for help, I only really ask questions here and I'm just going to suggest what to do, if you do it is up to you and I take no responsibility for your device having further issues.
1. Hard reset your device and upon it rebooting, check for the update again and try downloading it again
2. If that doesn't work then back up your data
3. After backing up your data do a factory reset on your device and once you've booted back up to Android, check for the update again and install
4. If that doesn't work, I'm not sure what else to suggest, this is what I would do to try and fix the problem, but for my situation it was unique in that I tried fixing it various ways that seemed to make it worse before it got somehow better.
I hope issuing a factory reset works for you, if not then that hard reset does when you try to redownload the update.
JohnathanKatz said:
Take anything I say with a grain of salt as I'm not the greatest guy to ask for help, I only really ask questions here and I'm just going to suggest what to do, if you do it is up to you and I take no responsibility for your device having further issues.
1. Hard reset your device and upon it rebooting, check for the update again and try downloading it again
2. If that doesn't work then back up your data
3. After backing up your data do a factory reset on your device and once you've booted back up to Android, check for the update again and install
4. If that doesn't work, I'm not sure what else to suggest, this is what I would do to try and fix the problem, but for my situation it was unique in that I tried fixing it various ways that seemed to make it worse before it got somehow better.
I hope issuing a factory reset works for you, if not then that hard reset does when you try to redownload the update.
Click to expand...
Click to collapse
Thanks for your reply back. Yep i also thought of the same 4 step solution as yourself but i also heard from 2 people that had the same thing happen to them and they thought it could be a goggle server problem, So i am going to wait to see if it sorts itself out over the next few days
manow91 said:
Thanks for your reply back. Yep i also thought of the same 4 step solution as yourself but i also heard from 2 people that had the same thing happen to them and they thought it could be a goggle server problem, So i am going to wait to see if it sorts itself out over the next few days
Click to expand...
Click to collapse
That could be too, just thought I'd take a shot, hope it works out for you.:good:

[Q] Spontaneous bootloop on certain stock roms

Hello all,
This is yet another bootloop story, although I haven't found anything quite like it yet, hence the idea to post it here for reference and in case some of you have interesting ideas to explore...
This is gonna be a bit long, but TL;DR: After my phone got "spontaneously" stuck into a bootloop, I find that only the stock 4.2.2 rom works, and no other.
So, tuesday I get back home with an empty battery and a Nexus 4 (running latest OTA) that has switched itself of after a day of somehow intense usage. No worries, I plug the AC adapter, let it charge for a bit and switch it back on. Booting seems a bit long, but I have to take care of a few home chores so I let it do its thing before coming back to it a few hours later. Only to find it still displaying the animated nexus logo. After a few switch off/switch on cycles, I understand its pretty stuck and I need to be more radical about it. So I enter the bootloader menu, and OEM unlock the phone (I had never needed to do that) hoping the full wipe associated with that will clear things up.
Well, it didn't. So I guess I'll need to flash a stock rom, and so I do. Since 4.4 is available on Google's stock roms page I try that, the animated logo changes but the end result is the same. So I try again with the latest JB (4.3) and still the same result. I get more than a bit frustrated but it's late and I need some sleep.
The next day, I call Google's warranty desk in France. They tell me that since the phone fell a few month ago, they cannot take it under the warranty program, and so I have to ask LG. Knowing there's no reasoning that will get me past the clerk that answered the phone I hang up after saying I'll get back to them via snail mail. Which I'll probably do soon, because I'm very disappointed with the way that warranty desk works.
Once at work, everytime I have a few spare minutes, I try to reflash with a new tool just in case it does more than automate what I did manually (nexus root toolkit being the one I tried most). It doesn't change a thing and my phone is still a nice animated paperweight.
I don't know why I ended up trying that, but I finally tried flashing the original 4.2.2 rom, and lo and behold, my phone finally got to the SIM code screen ! Everything worked nice after that, so once back at home, I go for the offered OTA upgrade to 4.3. Well, guess what, back to paperweight. Before reflashing 4.2.2, I took the time to flash CWM and activate adb by modifying /system/build.prop in the 4.3 image. This showed a recurrent problem with "system_server" segfaulting at launch (and it might have been caused by hal_sensors_get_list not returning anything, I have no clue). Trying the same on 4.4 yielded the same result.
Back to 4.2.2 and everything works fine, but I get nagged by the OTA notification, and more than that I'm wondering if there's any hope I might understand and fix the problem with my phone.
So, ladies and gentlemen, any clue that would help me is very welcome !
I plan to try a CM rom this week-end to see if it has the same problems as the stock one, but I have little confidence it doesn't. My guess is I have a hardware problem that's non-critical except it triggers a bug in 4.3+...
Thanks for reading !
--
Alain Perry
Same case, mi phone is totally stock and stuck on logo
KRT16S: no luck
I only had the time to try KRT16S this week-end, and this latest update doesn't change a thing. Same symptoms. So I guess I'm stuck on JB 4.2 for the coming week...

[Q] Reboots after Lollipop

Verizon Note 3 here, I received the Lollipop ota today and thought no harm in taking it as I was already stuck without root on 4.4.4.
It worked ok for the first couple minutes, then a reboot, then same thing, about 5 minutes and a reboot. Sometimes ~2 minutes, seems using it in any situation made the reboots happen. I did a factory reset thinking that would clear things up. Unfortunately now it is even worse, as it's rebooting anywhere from the first touch to the screen, to about 15 seconds of activity, literally dozens of reboots.
I downloaded the update on my pc and installed via Odin hoping that the ota was just corrupted or some bad luck like that. Nothing changed at all.
It will idle after booting just fine, I just can't do much of anything, every touch of the screen feels like a roll of the dice. Every few reboots or so I can make it to settings maybe but haven't been able to actually change much of anything, not that it would seem to matter here.
I've flashed via Odin twice, cleared the cashe many times, factory reset 3 or 4 times. Am I screwed here? What else to try?
*UPDATE* I flashed back to 4.4.4 with Odin and no more issues. It appears that my device alone is completely incompatible with the new firmware.
I should also note that I tried airplane mode, safe mode, and removing the sd card with no improvements.
After hours of messing with this thing and nearly giving up, not half an hour after I post here for help, I seem to have found a solution, although hopefully not a permanent one. The problem was happening when I would touch the screen, not scrolling ever, but making selections. On a whim I turned off sound and bam, no crashes.
I would still love it if someone had some insight about this problem, or better yet a solution.
I'm not sure yet if it is just the keypress sound that is killing it, or all sounds. I never did have any issues with the stock keyboard clicks now that I think of it, only the menu press sound. In any case it's not every time it made the sound, just half the time or so. Anything anybody could add to this would be appreciated.
*Edit* Not a solution, but it did help.
Well it's not as stable as I'd hoped. More like before the first factory reset now, but still not good at all. The various sounds definitely trigger crashes quickly(menu options, volume pings, mp3 songs from sd card), but regular silenced menu presses do sometimes as well still. Phone also bootloops several times often before it can get booted stable and 100% always crashes immediately if I try to unlock the screen in the first 5-10 seconds after booting up. Not sure if I'll be able to call or text as it's too late to test that atm. I'll update tomorrow, any insight appreciated.
I would say a bad download but I don't remember if ODIN checks MD5 sums (pretty sure it does). I would do a full wipe and reflash the stock image with odin
I am 100% stock not rooted never been rooted 5.0 vzw and I have had a couple of reboots. Never ever had one on this phone before. My old note 3 was rooted but I got this replacement after the root exploits had all been closed.
ehh not all have been closed
What is the root exploit for Verizon Note 3 with 5.0?
recDNA said:
What is the root exploit for Verizon Note 3 with 5.0?
Click to expand...
Click to collapse
None at the current time but CVE-2014-8609 seems like it could be some use
I spoke too soon when I said the phone was usable now. At best 5 minutes of light use as anything seems to crash it now. I did get a fresh image and used it with Odin with exactly the same result which makes me think its my phones hardware or something. Just seems crazy that it was working just fine before the update. The reason I pushed to 4.4.4 and lost root is because my phone suddenly started an issue where it would crash when making or receiving calls. It wasn't caused by any new apps or anything, just out of nowhere. I tried everything then updated as a last resort, carelessly I went to 4.4.4 instead of staying at 4.4.2 and lost chance of root, but it solved the problem I was having. I wonder if the issue is related somehow.
I was able to odin back to 4.4.4 and it's working fine so far, I assumed that you would not be able to revert back like the last ota and just tried it as a nothing to lose last effort. This is very important news to anybody that is having major issues with 5.0. Maybe, just maybe I'll try it again if they make an update patch for reported issues.
But for now, 4.4.4 it is for me.
VZW Note 3 update to Lollipop
I just finished the Lollipop update and my phone is working great for the past 30 minutes. Seems a little slower then usual but have had no issues besides my phone locking up after downloading the update, may have been due to my phone running down to 14%, but after removing the battery for 20 secs and putting it back on, phone came back on, I plugged into charger and started the update. Will post later if I have any issues.
I have been trying unsuccessfully through odin to downgrade but it keeps failing in odin, I downloaded the official firmware from sammobile.
Just curious if u r tried reinstalling newer odin? Try different USB port and cable. At this point maybe even try different pc if u have access to 1

N910F stock crash and bootloop after 6.0.1 update

Hello people of the world,
after reading a lot of posts here I still can't fix my phone's issues, so I need to post. Bear with me...
I have an N910F which was entirely stock and functioning without problems. Two days ago I accepted the official update. After that, the phone regularly lost connection to the mobile net, froze, and restarted. It would work for a short while until it froze and restarted again and again. When I tried to use the camera, the live picture was completely distorted. The phone crashed and has then gone into a bootloop.
I pulled the battery, did a recovery start and wiped the cache. No difference. Factory recovery next, no difference.
I have since tried several stock and custom firmwares, always taking care to follow instructions and use the correct bootloaders, modems, etc. TWRP is working.
When I flash a stock firmware, it will go into a bootloop. With any custom ROM, it will crash during startup (logo) and switch off.
Any help would be greatly appreciated!
Protect the eMMC?
So, after more reading I began to suspect that the eMMC had moved on to the valhalla of electronics. Sent my phone to service where my suspicion was confirmed. Luckily, they were able to replace the chip without having to put in a new board.
Is there any way to prevent this kind of failure again, or at least make it less likely?
Yes this is a known issue after latest update you could you install only one application called wakelock so that your phone doesn't reboot and CPU keeps awake
nicholes said:
Yes this is a known issue after latest update you could you install only one application called wakelock so that your phone doesn't reboot and CPU keeps awake
Click to expand...
Click to collapse
Thanks! I had read about that.
Got my phone back from service today, they had flashed stock 5.0.1. After checking that it worked I flashed RR 5.8.4 and installed Wake Lock Powermanager. I searched for a comprehensive tutorial on what the settings do and which to use. Right now I set it to PARTIAL_WAKE_LOCK (4) but I'd like to read more about it. Any tips on that?
tullian said:
Thanks! I had read about that.
Got my phone back from service today, they had flashed stock 5.0.1. After checking that it worked I flashed RR 5.8.4 and installed Wake Lock Powermanager. I searched for a comprehensive tutorial on what the settings do and which to use. Right now I set it to PARTIAL_WAKE_LOCK (4) but I'd like to read more about it. Any tips on that?
Click to expand...
Click to collapse
installing power wakelock and setting up on partial wake lock is enough.if you get trouble in starting your phone remove its battery and put your phone in refrigerator for five min.and try to start your phone.this problem also related and happens after the latest update

Categories

Resources