Black Screen after Stock FW flashing through dload - Huawei P9 Lite Questions & Answers

Hello. I'm done with my phone, I can't find help on this forum anymore.
I was on Nougat, then I tried to flash Lineage OS, it didn't boot, so I started to look for problem. Ended with bricked phone. Today I finally flashed it and it was okay, but that ROM was buggy, so I decided to go back to stock firmware. I uploaded B130 OEMInfo with custom.bin, got a B130 FW and flashed it through dload. Now my phone is dead, it got black screen. I can't turn it off or go to recovery. No vibrations, no sounds, only black screen. When I connect USB my PC recognizes it and fastboot is working. Tried to flash Nougat firmware again, but it didn't work.
Phone: P9 Lite VNS-L21 (Europe)
My theory - because I didn't used rollback package and just flashed MM OEMInfo, custom.bin and MM firmware through dload it just crashed. Don't really know any reason for it, because before dload it was working.
Found Phone : HUAWEI VNS-L21
Model : Huawei phone in fastboot mode
IMEI : ***
Serial NR. : ***
Firmware : VNS-L21C432B130
IMEI:***
FB LockState: LOCKED
USER LockState: UNLOCKED
unlocked
Battery state: 0

MrDomas said:
Hello. I'm done with my phone, I can't find help on this forum anymore.
I was on Nougat, then I tried to flash Lineage OS, it didn't boot, so I started to look for problem. Ended with bricked phone. Today I finally flashed it and it was okay, but that ROM was buggy, so I decided to go back to stock firmware. I uploaded B130 OEMInfo with custom.bin, got a B130 FW and flashed it through dload. Now my phone is dead, it got black screen. I can't turn it off or go to recovery. No vibrations, no sounds, only black screen. When I connect USB my PC recognizes it and fastboot is working. Tried to flash Nougat firmware again, but it didn't work.
Phone: P9 Lite VNS-L21 (Europe)
My theory - because I didn't used rollback package and just flashed MM OEMInfo, custom.bin and MM firmware through dload it just crashed. Don't really know any reason for it, because before dload it was working.
Found Phone : HUAWEI VNS-L21
Model : Huawei phone in fastboot mode
IMEI : ***
Serial NR. : ***
Firmware : VNS-L21C432B130
IMEI:***
FB LockState: LOCKED
USER LockState: UNLOCKED
unlocked
Battery state: 0
Click to expand...
Click to collapse
Try to charge battery - press a hold Volume+ and connect phone to PC or charger ,hold Volume+ until your phone will turn on ( it may take 5 - 7 minutes ). With a little bit luck your phone will boot into eRecovery , in eRecovery mode you can charge the battery.

Related

P8 Lite (ALE-L21) bricked

Hi,
I have an unlocked and rooted P8 Lite (ALE-L21) with TWRP 2.8.7.0 (I think that's the version) and I had a google play problem so after trying all solutions that I found it didn't work so i used the advanced wipe function that offers TWRP but accidently i wiped system part so I don't have any OS in my phone and now I have a bootloop. I downloaded a firmware "ALE-L21 V100R001C432B052 Europe channel dual sim" but I didn't know how to flash it because i'm new at huawei phones i was an expert in samsung devices however i don't know how to flash the UPDATE.APP file that I found in the dload folder with TWRP can you help me ? (I can't boot into the bootloader mode i can only boot recovery mode (TWRP) )
Thanks for reading that post ^^
Hello,
You can unbrick your device using this method Unbrick Huawei P8 Lite Ale-L21
Simply boot into bootloader(Plug phone into PC and hold volume down+power button, when phone vibrating release the buttons) when is in bootloader run bat(FLASH-ALL.bat) file in archive
This will install Firmware version C432B052 after that you can update via OTA
Regards
Thanks for replying to this post, I searched a little bit more and I found a software called "HuaweiUpdateExtractor" I extracted 4 files from my UPDATE.APP with that software : system, cust, recovery, boot and then flashed them with fastboot but I can't acces to my bootloader with the 2 volume buttons + power it give me an error so i used TWRP I went to Reboot then Bootloader ^^

P10 plus vky-l09 briked really need Help!!!!!!

Hello And first enter the topic direct i covert vky-l09 to vtr-l29 to be dual sim with oreo and now show me bootloader unlocked and frp locked and i download like 150 giga from finder nothing done and the recovery twrp can't enter and battery 0 but when put usb and press vol - fastboot mode and anythings flashed alot of files i test nothings :crying: so now :
error 11 recovery image and error 2 boot failed in recvoeryboot mode so how can i fix it....don't says dc unlocked becuase i try this befor with p9 plus and i fix it without dc but i don't remember what i do what can i do now ????any one know with hope becuase my wife will kill me
zartof-89 said:
Hello And first enter the topic direct i covert vky-l09 to vtr-l29 to be dual sim with oreo and now show me bootloader unlocked and frp locked and i download like 150 giga from finder nothing done and the recovery twrp can't enter and battery 0 but when put usb and press vol - fastboot mode and anythings flashed alot of files i test nothings :crying: so now :
error 11 recovery image and error 2 boot failed in recvoeryboot mode so how can i fix it....don't says dc unlocked becuase i try this befor with p9 plus and i fix it without dc but i don't remember what i do what can i do now ????any one know with hope becuase my wife will kill me
Click to expand...
Click to collapse
Use this method:
https://forum.xda-developers.com/p10-plus/how-to/unbrick-upgrade-huawei-p10-plus-android-t3818725

Cannot write to VERLIST partition - DC- Phoenix / DC Unlocker -COM Ports not detected

Hi Devs, { Please read DC Unlocker as HCU Client)- Sorry
I resurrected my Mate 10 lite with Bootloader Relocked/FRP Lock using DC- Phoenix and went back from OREO to Nougat.
C185 meafnaf was my original and i flashed a C432 ROM using HuRUpdater earlier and ended with a bricked phone with Bootloader Relocked and FRP locked.
The phone was resurrected then using DC Phoenix.
However, after successfull flash to Nougat, i installed TWRP for Nougat and rebranded from C432 to C185 to revert to my factory firmware (either nougat or Oreo).
(Downloaded OEMInfo from this post https://forum.xda-developers.com/ma...other-development/oeminfo-collection-t3762385)
I connected DC Phoenix, used the EU version Nougat ROM from DC Phoenix website. (Downloaded both the Data Apps)
During the flash, after booting to upgrade mode, DC-Phoenix displayed error message saying it cannot write to VERLIST partition (partiotion 4 of 23....) and exited.
In this case, it was meant to change the customization parameters to the file being flashed which i tried, but the phones COM ports were not detected by DC unlocker.
I also tried using board software, but the same error in upgrade mode is displayed.
Now this is the only issue preventing me from flashing the firmware.
I cannot install TWRP to flash C432 meafnaf OEMInfo to flash this ROM also.
Please let me know if there is a work around to detect the COM ports for Mate 10 lite in HCU Client.
fix ???
Can you share for boardsoftware for rne-l21? [email protected] THANKS!

Need help with Getting package info failed (Huawei Nova Plus)

Hello mates, hope u r doing well,
I have a problem with my Huawei Nova Plus AL10 (chineese version), i tried to update the version from 6 toNougat 7 with Huawei firmware finder, when arrived at 100%, it reboots and stucks in Huawei eRecovery (Getting package info failed msg appears).
Than i tried to downlad the official firmware AL10 (chineese version) and flash the phone with sd card (Dload==>Update), it loads and stops in 5% or 49%, the eRecovery and factory reset has never managed to download anything for me, always failed...
NB: Fastboot is working
Any help please neeeeeeeed solution
Fastboot should work,boot into it ( press and hold Volume Down and Power key for a while. You would see a green android.) and make sure you have adb/fastboot drivers installed then try. If that works, you can flash twrp and then a rom

Honor 8 lite 2017 build no. pra-la1-c185b220 bricked..

Hello,
My honor 8 lite was bricked recently and I tried almost every method to unlock but unfortunately nothing worked. I have my bootloader key also and dc phoenix for 72 hours but nothing working my way. Tried almost every update file available for my build and nothing worked. Help required from genius developers of XDA. My region is Pakistan.
Please anyone suggest me the correct firmware link and the whole procedure otherwise my money will be wasted.. bootloader is unlocked and frp locked..
I'm on it via PM, we'll post result once repaired with method used.
He's not replying now.. anyone else can help?
I replied 10 minutes ago..
Sorry I got it now
So, while your downloading firmwares, i'll post what I told you on PM.
"
Ok, so I think you did not rebrand your phone:
-You installed wrong region with FF (in fact right region but for huawei variant not honor variant). So your phone does not boot to normal mode anymore, it's normal.
-You then flashed different firmware via DC-Phoenix.
These steps alone does not rebrand your phone...
I think your honor 8 lite c185 honor variant is LA1 or L21HN (and not the huawei gr3 2017 variant).
1) Download this oreo service repair firmware 8.0.0.363(C185)*:
http://androidhost.ru/9dg
To install, you will have to boot in 'firmware mode' aka dload mode, and used an exfat formatted SDcard or USB-OTG. There is 3 flashes to do ; instructions are inside.
2)If working with this oreo service repair firmware, we'll then unlock Bootloader and bootloader's FRP, then we'll use Normal ota or twrp+HuRUpdater to update to 8.0.0.382(C185) with these 3 files:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2312/g1699/v172010/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...10/f1/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/..._meafnaf/update_full_PRA-L21HN_hw_meafnaf.zip[/QUOTE]
3)OREO service repair may not work if you are still with nougat partition scheme,
if so you'll have to download a NOUGAT service repair : https://support.halabtech.com/index.php?a=downloads&b=file&c=download&id=53498
Done doing 1)
First, big .app flash via dload
Second, small . app flash via dc-phoenix as device won't boot to firmware mode
Third, big .app flash via dload
Device restored !
Honor 8 lite back alive again with oreo..
But I am going warn everyone who's new to all of this.. Don't try to update by yourself.. Get guidence from someone here and then try to update your phone only if you have bootloader unlocked and frp too..
oslo83 said:
Done doing 1)
First, big .app flash via dload
Second, small . app flash via dc-phoenix as device won't boot to firmware mode
Third, big .app flash via dload
Device restored !
Click to expand...
Click to collapse
Thank you very much for all your support..

Categories

Resources