Hi Devs, { Please read DC Unlocker as HCU Client)- Sorry
I resurrected my Mate 10 lite with Bootloader Relocked/FRP Lock using DC- Phoenix and went back from OREO to Nougat.
C185 meafnaf was my original and i flashed a C432 ROM using HuRUpdater earlier and ended with a bricked phone with Bootloader Relocked and FRP locked.
The phone was resurrected then using DC Phoenix.
However, after successfull flash to Nougat, i installed TWRP for Nougat and rebranded from C432 to C185 to revert to my factory firmware (either nougat or Oreo).
(Downloaded OEMInfo from this post https://forum.xda-developers.com/ma...other-development/oeminfo-collection-t3762385)
I connected DC Phoenix, used the EU version Nougat ROM from DC Phoenix website. (Downloaded both the Data Apps)
During the flash, after booting to upgrade mode, DC-Phoenix displayed error message saying it cannot write to VERLIST partition (partiotion 4 of 23....) and exited.
In this case, it was meant to change the customization parameters to the file being flashed which i tried, but the phones COM ports were not detected by DC unlocker.
I also tried using board software, but the same error in upgrade mode is displayed.
Now this is the only issue preventing me from flashing the firmware.
I cannot install TWRP to flash C432 meafnaf OEMInfo to flash this ROM also.
Please let me know if there is a work around to detect the COM ports for Mate 10 lite in HCU Client.
fix ???
Can you share for boardsoftware for rne-l21? [email protected] THANKS!
Related
Hello. I'm done with my phone, I can't find help on this forum anymore.
I was on Nougat, then I tried to flash Lineage OS, it didn't boot, so I started to look for problem. Ended with bricked phone. Today I finally flashed it and it was okay, but that ROM was buggy, so I decided to go back to stock firmware. I uploaded B130 OEMInfo with custom.bin, got a B130 FW and flashed it through dload. Now my phone is dead, it got black screen. I can't turn it off or go to recovery. No vibrations, no sounds, only black screen. When I connect USB my PC recognizes it and fastboot is working. Tried to flash Nougat firmware again, but it didn't work.
Phone: P9 Lite VNS-L21 (Europe)
My theory - because I didn't used rollback package and just flashed MM OEMInfo, custom.bin and MM firmware through dload it just crashed. Don't really know any reason for it, because before dload it was working.
Found Phone : HUAWEI VNS-L21
Model : Huawei phone in fastboot mode
IMEI : ***
Serial NR. : ***
Firmware : VNS-L21C432B130
IMEI:***
FB LockState: LOCKED
USER LockState: UNLOCKED
unlocked
Battery state: 0
MrDomas said:
Hello. I'm done with my phone, I can't find help on this forum anymore.
I was on Nougat, then I tried to flash Lineage OS, it didn't boot, so I started to look for problem. Ended with bricked phone. Today I finally flashed it and it was okay, but that ROM was buggy, so I decided to go back to stock firmware. I uploaded B130 OEMInfo with custom.bin, got a B130 FW and flashed it through dload. Now my phone is dead, it got black screen. I can't turn it off or go to recovery. No vibrations, no sounds, only black screen. When I connect USB my PC recognizes it and fastboot is working. Tried to flash Nougat firmware again, but it didn't work.
Phone: P9 Lite VNS-L21 (Europe)
My theory - because I didn't used rollback package and just flashed MM OEMInfo, custom.bin and MM firmware through dload it just crashed. Don't really know any reason for it, because before dload it was working.
Found Phone : HUAWEI VNS-L21
Model : Huawei phone in fastboot mode
IMEI : ***
Serial NR. : ***
Firmware : VNS-L21C432B130
IMEI:***
FB LockState: LOCKED
USER LockState: UNLOCKED
unlocked
Battery state: 0
Click to expand...
Click to collapse
Try to charge battery - press a hold Volume+ and connect phone to PC or charger ,hold Volume+ until your phone will turn on ( it may take 5 - 7 minutes ). With a little bit luck your phone will boot into eRecovery , in eRecovery mode you can charge the battery.
I flashed my Huawei p9 lite VNS-L21 DUALSIM with vns l21c150b360 rom with bootloader unlocked and frp unlocked.
Now my build number is generic_a15 and build number NRD90M test keys.
I made factory reset and the phone stay in the same condition with bootloader unlocked and frp unlocked.
I can't install any rom official or custom with dload folder.
I can't install any rom official or custom with TWRP also.
In addition i receive that ''data partition has damaged seriously you need to reset your device to factory defaults.this will erase all your date''.I proccced to factory reset but the promblem exist.
Also i cant make roll back,i cant install oeminfo, I can't install twrp.
My phone boot properly but i have no sound and missing some apps.Can you help me in order to istall TWRP and the correct rom?
i have p9lite vns-l31
i had an official nougat then i unlocked the bootloader and flashed twrp
then i tried to flash elite rom but i did something wrong and now my phone is bricked
cant enter fastboot or twrp or doing anything it only enter the erecovery
i tried to rollback to mm i downloaded the rollback file and i flashed it successfully then i tried to flash mm but it always stops at 50%
is there anyhelp please
mohamed.hmdy33 said:
i have p9lite vns-l31
i had an official nougat then i unlocked the bootloader and flashed twrp
then i tried to flash elite rom but i did something wrong and now my phone is bricked
cant enter fastboot or twrp or doing anything it only enter the erecovery
i tried to rollback to mm i downloaded the rollback file and i flashed it successfully then i tried to flash mm but it always stops at 50%
is there anyhelp please
Click to expand...
Click to collapse
"it always stops at 50%" - unplug your phone from PC
Hello,
My honor 8 lite was bricked recently and I tried almost every method to unlock but unfortunately nothing worked. I have my bootloader key also and dc phoenix for 72 hours but nothing working my way. Tried almost every update file available for my build and nothing worked. Help required from genius developers of XDA. My region is Pakistan.
Please anyone suggest me the correct firmware link and the whole procedure otherwise my money will be wasted.. bootloader is unlocked and frp locked..
I'm on it via PM, we'll post result once repaired with method used.
He's not replying now.. anyone else can help?
I replied 10 minutes ago..
Sorry I got it now
So, while your downloading firmwares, i'll post what I told you on PM.
"
Ok, so I think you did not rebrand your phone:
-You installed wrong region with FF (in fact right region but for huawei variant not honor variant). So your phone does not boot to normal mode anymore, it's normal.
-You then flashed different firmware via DC-Phoenix.
These steps alone does not rebrand your phone...
I think your honor 8 lite c185 honor variant is LA1 or L21HN (and not the huawei gr3 2017 variant).
1) Download this oreo service repair firmware 8.0.0.363(C185)*:
http://androidhost.ru/9dg
To install, you will have to boot in 'firmware mode' aka dload mode, and used an exfat formatted SDcard or USB-OTG. There is 3 flashes to do ; instructions are inside.
2)If working with this oreo service repair firmware, we'll then unlock Bootloader and bootloader's FRP, then we'll use Normal ota or twrp+HuRUpdater to update to 8.0.0.382(C185) with these 3 files:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2312/g1699/v172010/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...10/f1/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/..._meafnaf/update_full_PRA-L21HN_hw_meafnaf.zip[/QUOTE]
3)OREO service repair may not work if you are still with nougat partition scheme,
if so you'll have to download a NOUGAT service repair : https://support.halabtech.com/index.php?a=downloads&b=file&c=download&id=53498
Done doing 1)
First, big .app flash via dload
Second, small . app flash via dc-phoenix as device won't boot to firmware mode
Third, big .app flash via dload
Device restored !
Honor 8 lite back alive again with oreo..
But I am going warn everyone who's new to all of this.. Don't try to update by yourself.. Get guidence from someone here and then try to update your phone only if you have bootloader unlocked and frp too..
oslo83 said:
Done doing 1)
First, big .app flash via dload
Second, small . app flash via dc-phoenix as device won't boot to firmware mode
Third, big .app flash via dload
Device restored !
Click to expand...
Click to collapse
Thank you very much for all your support..
Hi everyone
I hope someone can help me with this:
I'm trying to root my huawei p9 lite vns-l31 C185 B397
1- FRP and bootloader unlocked
2- I tried flashing and booting into TWRP recovery in fastboot mode using (twrp-3.5.2_9-0-a5y17lte.img) latest version but the phone always gets back to (erecovery)
and i wasn't able to validate the link for the specific device model
download twrp-3.1.1-0-venus.img
3- I tried rooting using Magisk by patching and flashing the (boot.img) file from (UPDATE.APP) file from this ROM (Huawei_P9_Lite_VNS-L31_C636B170_Asia_6.0) which is in different region than my original firmware
eventually I got stuck at ("Your device is booting now")
does anyone have an idea how to fix the problem?
aramous said:
Hi everyone
I hope someone can help me with this:
I'm trying to root my huawei p9 lite vns-l31 C185 B397
1- FRP and bootloader unlocked
2- I tried flashing and booting into TWRP recovery in fastboot mode using (twrp-3.5.2_9-0-a5y17lte.img) latest version but the phone always gets back to (erecovery)
and i wasn't able to validate the link for the specific device model
download twrp-3.1.1-0-venus.img
3- I tried rooting using Magisk by patching and flashing the (boot.img) file from (UPDATE.APP) file from this ROM (Huawei_P9_Lite_VNS-L31_C636B170_Asia_6.0) which is in different region than my original firmware
eventually I got stuck at ("Your device is booting now")
does anyone have an idea how to fix the problem?
Click to expand...
Click to collapse
- Install TWRP 3.1.0.2
Link
- Download Magisk.zip file
https://androidfilehost.com/?fid=673791459329054316
- Download and install Magisk manager 5.4.0
- Enter TWRP and flash Magísk.zip
- Reboot
Or, you can root your phone by installing SuperSu 2.8.2.zip in TWRP.
Awesome ! all done ! thanks a lot for your help !