Basically i rooted systemlesly and changed my emojis to the IOS ones with an app on the playstore. Then i reset my phone because of reasons. Now i want to remove my root and get magisk and xposed. To do this i need to remove my SU root and flash magisk, however magisk will only flash with an unmodified system.
This is where my problem occurs. When i reset my phone my original emojis were removed, leaving me with the IOS emojis. I made no backup of my original emojis. When i click restore emojis on the app no emojis change, and when i install the nougat emojis from the app my system is still considered "modified"
Therefore, im asking if anyone has a boot.img of my Moto x style, as i think flashing that would fix it. I also think that if anyone has the original NotoColorEmoji.ttf file, i can replace it with mine and it could fix it aswell. If anyone has any of these 2 files it would be much appreciated ??
Supersu can restore boot - unroot & clean option.
Tts you can extract from stock latam:
https://forum.xda-developers.com/moto-x-style/general/xt1575-72-nougat-7-0-stock-official-t3671995
Or
Somewhere in general was twrp backup of reteu:
https://forum.xda-developers.com/moto-x-style/general
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
@XxperexX
dzidexx said:
Supersu can restore boot - unroot & clean option.
Tts you can extract from stock latam:
https://forum.xda-developers.com/moto-x-style/general/xt1575-72-nougat-7-0-stock-official-t3671995
Or
Somewhere in general was twrp backup of reteu:
https://forum.xda-developers.com/moto-x-style/general
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
@XxperexX
Click to expand...
Click to collapse
Trying to restore boot from SuperSU resulted in it saying uninstallation failed. I also tried looking through the general section and none that ive found have a boot.img file i can just flash.
Very funny
https://forum.xda-developers.com/moto-x-style/general/backup-image-moto-x-style-android-7-0-t3637111
---------- Post added at 08:56 PM ---------- Previous post was at 08:54 PM ----------
@XxperexX
dzidexx said:
Very funny
https://forum.xda-developers.com/moto-x-style/general/backup-image-moto-x-style-android-7-0-t3637111
---------- Post added at 08:56 PM ---------- Previous post was at 08:54 PM ----------
@XxperexX
Click to expand...
Click to collapse
Funny indeed ? That image doesn't have a -3 at the end, and mine does, so idk if it will work and i wanna be sure
For sure you should have your own backup.
Why don't?
I'm not sure but boot(kernel) should work. @XxperexX
Do full backup first.
In supersu thread shoul be su uninstaler.zip.
dzidexx said:
For sure you should have your own backup.
Why don't?
I'm not sure but boot(kernel) should work. @XxperexX
Do full backup first.
In supersu thread shoul be su uninstaler.zip.
Click to expand...
Click to collapse
Ive already uninstalled supersu, i just said no when it asked to restore ti stock boot because when i chose yes it said failed. The only backups i have are of marshmallow 18-8 and nougat, but with the changed emojis (pretty stupid on my part)
I also have no idea what u mean by boot(kernel)
Sypersu(magisk too) modify boot partition(kernel), both are systemless.
If you want change susu to magisk you need uninstall susu and restore stock boot.
I haven't now supersu but I know it is backing up stock boot and can restore it when uninstalling.
This option is in supersu app.
/Supersu on MM needed to make folder .su if I good remember, maybe you didn't do it/
You can stay at what you have or restore boot + system(linked) and format/wipe data, cache, dalvik. @XxperexX
You can't downgrade now - bootloader is Nougat, you will not get ota.
Sorry for my english.
dzidexx said:
Sypersu(magisk too) modify boot partition(kernel), both are systemless.
If you want change susu to magisk you need uninstall susu and restore stock boot.
I haven't now supersu but I know it is backing up stock boot and can restore it when uninstalling.
This option is in supersu app.
/Supersu on MM needed to make folder .su if I good remember, maybe you didn't do it/
You can stay at what you have or restore boot + system(linked) and format/wipe data, cache, dalvik. @XxperexX
You can't downgrade now - bootloader is Nougat, you will not get ota.
Sorry for my english.
Click to expand...
Click to collapse
Lol its fine. Well eventually i managed to install magisk. I downloaded the boot/sys backup from https://forum.xda-developers.com/mo...gust-2017-security-patch-nph25-t3673373/page3 and restored it via twrp, then flashed magisk and it worked
Related
This might be a standard question, if so please delete.
I have found some posts on flashing stock with fastboot but sadly I can't due to a fastboot issue on my phone (fastboot secure, no baseband) but I can flash a rom using twrp.
If the answer is no, is there a rom similar to stock? I just want the stability of stock now and the stock apps.
What is your model, xt1575 or 72?
Somewhere was backups, you need boot+system. @Walgeon
I have 72. I can only flash a rom due to some odd issue I have that I can't fix. @dzidexx
I don't understand - you can flash rom.zip but cannot restore backup? @Walgeon
---------- Post added at 09:14 PM ---------- Previous post was at 09:01 PM ----------
Here you can download my backup:
https://forum.xda-developers.com/mo...ock-backup-reteu-xt1572-6-0-1-twrp-3-t3630568
Do your own any backup(to usb, sd card, memory) and replace files, restore.
Here are flashable modems:
https://forum.xda-developers.com/mo...odem-flashable-modem-files-eu-single-t3297051
Flash for your region and reboot.
Good Morning everybody,
so yesterday was a rough day and when it eventually end i recive the october security update on the phone, without thinking i installed it and the phone does not boot up , instead i face my recovery (TWRP 3.1.1-0).
Of course i've made a mess because i was on stock rooted 7.0 on my retEU XT1572 phone with unlocked bootloader and status 3
i've tryed to restore a previous nandroid backup wihtout success, so today i downloaded the new RESURRECTION REMIX v5.8.4 (4 december wich is based on stock android 7) but i have no luck even with that...
Do i miss something?is there any rom to try with now? or i have to make a downgrade of my firmware to make it work again?
thanks in advice!
UPDATE:
phone boot now but always in recovery and after rebooting in bootloader i can reboot system from there.. it seems that if you download an update and the install process doesen't go in place every time you restart the device it always try to re-flash it, that's why i'm always in recovery.. i foun a similar post with this solution but i think it need some changes before it will work on our device (but i don't have the knowledge to set it right :S )
LAST UPDATE:
boot fixed by using this command in twrp recovery
dd if=/dev/zero of=/dev/block/platform/f9824900.sdhci/by-name/misc
misc file running at the startup redirecting the boot in the recovery, put blank in the file let the system boot up normally
You missed very much.
Here is stock RetEu, before october update:
https://forum.xda-developers.com/moto-x-style/general/stock-xt-1572-reteu-7-0-ddumped-files-t3712521
Wipe all with twrp and flash all. After it you can get OTA's.
---------- Post added at 10:59 AM ---------- Previous post was at 10:57 AM ----------
Here is RR 5.8.5 working on N modem:
https://forum.xda-developers.com/mo...ial-resurrection-remix-v5-8-3-t3637204/page40 post #397
Wipe all with twrp, update twrp to 3.2 and you can flash it right now.
@
---------- Post added at 11:03 AM ---------- Previous post was at 10:59 AM ----------
@Husky34
oh thanx man! i've already seen that post but i wasn't sure that it can work for me. i have some question befor starting:
1) i need the new twrp 3.2 to flash resurrection-remix? because as i mention before i've already tried to flash it with twrp 3.1 and it doesen't work (the rom is the same that you linked page40 post #397 )
2) do i have to flash stock-xt-1572-reteu-7-0-ddumped-files before point 1)?
dzidexx said:
You missed very much.
Here is stock RetEu, before october update:
https://forum.xda-developers.com/moto-x-style/general/stock-xt-1572-reteu-7-0-ddumped-files-t3712521
Wipe all with twrp and flash all. After it you can get OTA's.
---------- Post added at 10:59 AM ---------- Previous post was at 10:57 AM ----------
Here is RR 5.8.5 working on N modem:
https://forum.xda-developers.com/mo...ial-resurrection-remix-v5-8-3-t3637204/page40 post #397
Wipe all with twrp, update twrp to 3.2 and you can flash it right now.
@
---------- Post added at 11:03 AM ---------- Previous post was at 10:59 AM ----------
@Husky34
Click to expand...
Click to collapse
Husky34 said:
oh thanx man! i've already seen that post but i wasn't sure that it can work for me. i have some question befor starting:
1) i need the new twrp 3.2 to flash resurrection-remix? because as i mention before i've already tried to flash it with twrp 3.1 and it doesen't work
2) do i have to flash stock-xt-1572-reteu-7-0-ddumped-files before point 1)?
Click to expand...
Click to collapse
1. I think so. 3.2.x will be needed for future builds.
1a. You flashed RR for MM modem.
2. No, but this is only way to get ota update.
"swearing in italian" it was a twrp bug.. after a backup restore if you hit restart the phone restart in recovery, you need to boot into bootloader and reboot system from there -.-
thanks to all of you guys!!
strange fact, now if i turn off the phone and again on i'm still on recovery, i have to reboot bootloader and system from there.
i think something is pointing at the recovery instead system..
edit: it seems that if you download an update and the install process doesen't go in place every time you restart the device it always try to re-flash it, that's why i'm always in recovery.. i foun a similar post with this solution but i think it need some changes before it will work on our device (but i don't have the knowledge to set it right :S )
Ota update didn't end.
I think you can try clear data & cache otaupdate app and disable it. Link2sd can help with it. @Husky34
dzidexx said:
Ota update didn't end.
I think you can try clear data & cache otaupdate app and disable it. Link2sd can help with it. @Husky34
Click to expand...
Click to collapse
just tried but wihout luck.. maybe i can wait someone make the flashable update but i don't think this fix the issue
Flash uploaded stock.
dzidexx said:
Flash uploaded stock.
Click to expand...
Click to collapse
actually i fixed the issue using this command
dd if=/dev/zero of=/dev/block/platform/f9824900.sdhci/by-name/misc
misc file running at the startup redirecting the boot in the recovery, put blank in the file let the system boot up normally
Husky34 said:
actually i fixed the issue using this command
dd if=/dev/zero of=/dev/block/platform/f9824900.sdhci/by-name/misc
misc file running at the startup redirecting the boot in the recovery, put blank in the file let the system boot up normally
Click to expand...
Click to collapse
thanks, this command just saved me. but misc file in my XT1575 is under
/dev/block/platform/0/f9824900.sdhci/by-name/misc
but now I can't check system update in the OS anymore, I think flash back factory recovery mine help. Do you know where to download stock 7.0 recovery for 1575?
Edit: found it for 1575 here.
pshadoww said:
thanks, this command just saved me. but misc file in my XT1575 is under
/dev/block/platform/0/f9824900.sdhci/by-name/misc
but now I can't check system update in the OS anymore, I think flash back factory recovery mine help. Do you know where to download stock 7.0 recovery for 1575?
Edit: found it for 1575 here.
Click to expand...
Click to collapse
you can also use link2sd to disable the update app so it doesn't bother you,
or wait untill someone create a zip of the update and flash it into recovery.
thanks, that worked for me as well.
File was located at /dev/block/platform/soc.0/f9824900.sdhci/by-name/misc
Hi, I have nougat with magisk December update, and I'm trying since 2 days to update it to the latest version (can't install the 60 MB update, probably cause magisk) so I'm looking for a clean boot.img in order to flash it in recovery (my magisk boot.img backup is screwed)
Thanks
http://en.miui.com/download-333.html
Should I really extract 3gb just for a boot.img?
Can't download the while update right now, if anyone got it please upload and send us a link! It'll be much appreciated
---------- Post added at 04:37 PM ---------- Previous post was at 04:36 PM ----------
albi7894 said:
Should I really extract 3gb just for a boot.img?
Click to expand...
Click to collapse
Well, not exactly. You can browse through the zip. It should be there inside some folder. Send me a link to it, I too need it!
But yes you have to download the whole update to get the boot.img
Ok, extracted the boot.img, flashed using twrp image flash (selected boot) and bootloop. Gotta lose some data now...
Use MiFlash tool to flash the update!
You'll not lose your data!
---------- Post added at 05:01 PM ---------- Previous post was at 05:00 PM ----------
albi7894 said:
Ok, extracted the boot.img, flashed using twrp image flash (selected boot) and bootloop. Gotta lose some data now...
Click to expand...
Click to collapse
Use MiFlash! Check out the tutorial for it, it's not that hard. Plus, you get to keep your data!
I cant seem to find the update anywhere..
Dude you just downloaded it, didn't you?
Yeah but its the full rom, will it reset my data?
Not if you use the MiFlash tool. It's for windows. Download it, install it to your windows machine. Search for its guide, its not that hard to follow!
Thanks a lot guys, I flashed system with mi flash and I did not lost data, I'm also finally installing the update. One last question: Now that system is reflashed, does that mean that it is completely stock? I mean, are boot.img from slots a and b totally stock?
Flash stock rom whith MI tool flash
Sent from my tissot_sprout using XDA Labs
I am rooting my Lenovo A6000+, running Kitkat 4.4.4, for the first time and needed some help.
1)Which version of magisk is compatible with this device?
2)Where do I Store the Magisk/SuperSu zip file in order to flash it from TWRP?
3)Except my personal data,which files should I make a backup of(i.e, system files)?
4) What data loss can I expect even if everything goes fine?
5)In some guides it was mentioned that I need to wipe many types of cache after installing TWRP,is it necessary?If yes,what are the names of those caches?
I am a complete noob when it comes to rooting so any help will be deeply appreciated.
Using kingrooy
---------- Post added at 12:03 PM ---------- Previous post was at 12:00 PM ----------
Or flash twrp, maybe the SuperSU will work
If can't, just use KingRoot.
You can find twrp for KitKat on the net.
I was trying to patch my tablet's boot.img so i could root it and put a better Android OS without the bloatware, and now my tablet is bricked, it gets to the "ONN, powered by Android" logo and goes blank, does anyone have the stock firmware for it?
Stock images in this thread: https://forum.xda-developers.com/wa...eral/stock-stock-backups-images-otas-t3998227
---------- Post added 5th May 2020 at 12:08 AM ---------- Previous post was 4th May 2020 at 11:35 PM ----------
BTW, I had the same issue when trying to use Magisk Manager to patch the boot image. I ended up installing TWRP (after restoring stock boot) and then using that to add Magisk from the ZIP.
N6ML said:
Stock images in this thread: https://forum.xda-developers.com/wa...eral/stock-stock-backups-images-otas-t3998227
---------- Post added 5th May 2020 at 12:08 AM ---------- Previous post was 4th May 2020 at 11:35 PM ----------
BTW, I had the same issue when trying to use Magisk Manager to patch the boot image. I ended up installing TWRP (after restoring stock boot) and then using that to add Magisk from the ZIP.
Click to expand...
Click to collapse
Where can i find the TWRP image, also how do i flash the firmware back to the tablet? fastboot keeps telling me the system image doesn't exist.
matthew65536 said:
Where can i find the TWRP image, also how do i flash the firmware back to the tablet? fastboot keeps telling me the system image doesn't exist.
Click to expand...
Click to collapse
TWRP images linked from this thread - I used installation method 1.
Does this actually work for 100003562