This might be a standard question, if so please delete.
I have found some posts on flashing stock with fastboot but sadly I can't due to a fastboot issue on my phone (fastboot secure, no baseband) but I can flash a rom using twrp.
If the answer is no, is there a rom similar to stock? I just want the stability of stock now and the stock apps.
What is your model, xt1575 or 72?
Somewhere was backups, you need boot+system. @Walgeon
I have 72. I can only flash a rom due to some odd issue I have that I can't fix. @dzidexx
I don't understand - you can flash rom.zip but cannot restore backup? @Walgeon
---------- Post added at 09:14 PM ---------- Previous post was at 09:01 PM ----------
Here you can download my backup:
https://forum.xda-developers.com/mo...ock-backup-reteu-xt1572-6-0-1-twrp-3-t3630568
Do your own any backup(to usb, sd card, memory) and replace files, restore.
Here are flashable modems:
https://forum.xda-developers.com/mo...odem-flashable-modem-files-eu-single-t3297051
Flash for your region and reboot.
Related
So yesterday I installed CM13 on my phone and I had some problems so I wanted to revert to stock rom. Thankfully I had a backup made with TWRP, so I installed it but TWRP crashed when doing so, so I tried it again but this time I wiped everything (internal storage aswell...), which was a bad idea, because it deleted my backup aswell (didn't think of that). After that I downloaded the 6.0.1 (MMB29M) Stock image from the Google Developers site, rebooted into bootloader and tried using the flash-all script to flash the stock rom (I put all the files into the plattform-tools folder). But when flashing Radio, etc. it showed that it wasn't possible because of an unknown error and then it said that boot.sig or so was missing. After that the script crashed.
Now here I am with no data on my phone and I don't know how to flash anything (trying sideload with TWRP doesn't work aswell because it says that my device is offline).
How can I get the script to work ?
The best thing to do would be to flash each fastboot-file manually; using the flash-all.bat often creates the error you have mentioned previously. Check out Heisenberg's elaborate guide on how to flash the fastboot-files properly (and thus return to stock).
---------- Post added at 01:31 PM ---------- Previous post was at 01:29 PM ----------
See point 11 for further instructions:
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
Basically i rooted systemlesly and changed my emojis to the IOS ones with an app on the playstore. Then i reset my phone because of reasons. Now i want to remove my root and get magisk and xposed. To do this i need to remove my SU root and flash magisk, however magisk will only flash with an unmodified system.
This is where my problem occurs. When i reset my phone my original emojis were removed, leaving me with the IOS emojis. I made no backup of my original emojis. When i click restore emojis on the app no emojis change, and when i install the nougat emojis from the app my system is still considered "modified"
Therefore, im asking if anyone has a boot.img of my Moto x style, as i think flashing that would fix it. I also think that if anyone has the original NotoColorEmoji.ttf file, i can replace it with mine and it could fix it aswell. If anyone has any of these 2 files it would be much appreciated ??
Supersu can restore boot - unroot & clean option.
Tts you can extract from stock latam:
https://forum.xda-developers.com/moto-x-style/general/xt1575-72-nougat-7-0-stock-official-t3671995
Or
Somewhere in general was twrp backup of reteu:
https://forum.xda-developers.com/moto-x-style/general
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
@XxperexX
dzidexx said:
Supersu can restore boot - unroot & clean option.
Tts you can extract from stock latam:
https://forum.xda-developers.com/moto-x-style/general/xt1575-72-nougat-7-0-stock-official-t3671995
Or
Somewhere in general was twrp backup of reteu:
https://forum.xda-developers.com/moto-x-style/general
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
@XxperexX
Click to expand...
Click to collapse
Trying to restore boot from SuperSU resulted in it saying uninstallation failed. I also tried looking through the general section and none that ive found have a boot.img file i can just flash.
Very funny
https://forum.xda-developers.com/moto-x-style/general/backup-image-moto-x-style-android-7-0-t3637111
---------- Post added at 08:56 PM ---------- Previous post was at 08:54 PM ----------
@XxperexX
dzidexx said:
Very funny
https://forum.xda-developers.com/moto-x-style/general/backup-image-moto-x-style-android-7-0-t3637111
---------- Post added at 08:56 PM ---------- Previous post was at 08:54 PM ----------
@XxperexX
Click to expand...
Click to collapse
Funny indeed ? That image doesn't have a -3 at the end, and mine does, so idk if it will work and i wanna be sure
For sure you should have your own backup.
Why don't?
I'm not sure but boot(kernel) should work. @XxperexX
Do full backup first.
In supersu thread shoul be su uninstaler.zip.
dzidexx said:
For sure you should have your own backup.
Why don't?
I'm not sure but boot(kernel) should work. @XxperexX
Do full backup first.
In supersu thread shoul be su uninstaler.zip.
Click to expand...
Click to collapse
Ive already uninstalled supersu, i just said no when it asked to restore ti stock boot because when i chose yes it said failed. The only backups i have are of marshmallow 18-8 and nougat, but with the changed emojis (pretty stupid on my part)
I also have no idea what u mean by boot(kernel)
Sypersu(magisk too) modify boot partition(kernel), both are systemless.
If you want change susu to magisk you need uninstall susu and restore stock boot.
I haven't now supersu but I know it is backing up stock boot and can restore it when uninstalling.
This option is in supersu app.
/Supersu on MM needed to make folder .su if I good remember, maybe you didn't do it/
You can stay at what you have or restore boot + system(linked) and format/wipe data, cache, dalvik. @XxperexX
You can't downgrade now - bootloader is Nougat, you will not get ota.
Sorry for my english.
dzidexx said:
Sypersu(magisk too) modify boot partition(kernel), both are systemless.
If you want change susu to magisk you need uninstall susu and restore stock boot.
I haven't now supersu but I know it is backing up stock boot and can restore it when uninstalling.
This option is in supersu app.
/Supersu on MM needed to make folder .su if I good remember, maybe you didn't do it/
You can stay at what you have or restore boot + system(linked) and format/wipe data, cache, dalvik. @XxperexX
You can't downgrade now - bootloader is Nougat, you will not get ota.
Sorry for my english.
Click to expand...
Click to collapse
Lol its fine. Well eventually i managed to install magisk. I downloaded the boot/sys backup from https://forum.xda-developers.com/mo...gust-2017-security-patch-nph25-t3673373/page3 and restored it via twrp, then flashed magisk and it worked
Hi, I have nougat with magisk December update, and I'm trying since 2 days to update it to the latest version (can't install the 60 MB update, probably cause magisk) so I'm looking for a clean boot.img in order to flash it in recovery (my magisk boot.img backup is screwed)
Thanks
http://en.miui.com/download-333.html
Should I really extract 3gb just for a boot.img?
Can't download the while update right now, if anyone got it please upload and send us a link! It'll be much appreciated
---------- Post added at 04:37 PM ---------- Previous post was at 04:36 PM ----------
albi7894 said:
Should I really extract 3gb just for a boot.img?
Click to expand...
Click to collapse
Well, not exactly. You can browse through the zip. It should be there inside some folder. Send me a link to it, I too need it!
But yes you have to download the whole update to get the boot.img
Ok, extracted the boot.img, flashed using twrp image flash (selected boot) and bootloop. Gotta lose some data now...
Use MiFlash tool to flash the update!
You'll not lose your data!
---------- Post added at 05:01 PM ---------- Previous post was at 05:00 PM ----------
albi7894 said:
Ok, extracted the boot.img, flashed using twrp image flash (selected boot) and bootloop. Gotta lose some data now...
Click to expand...
Click to collapse
Use MiFlash! Check out the tutorial for it, it's not that hard. Plus, you get to keep your data!
I cant seem to find the update anywhere..
Dude you just downloaded it, didn't you?
Yeah but its the full rom, will it reset my data?
Not if you use the MiFlash tool. It's for windows. Download it, install it to your windows machine. Search for its guide, its not that hard to follow!
Thanks a lot guys, I flashed system with mi flash and I did not lost data, I'm also finally installing the update. One last question: Now that system is reflashed, does that mean that it is completely stock? I mean, are boot.img from slots a and b totally stock?
Flash stock rom whith MI tool flash
Sent from my tissot_sprout using XDA Labs
I am rooting my Lenovo A6000+, running Kitkat 4.4.4, for the first time and needed some help.
1)Which version of magisk is compatible with this device?
2)Where do I Store the Magisk/SuperSu zip file in order to flash it from TWRP?
3)Except my personal data,which files should I make a backup of(i.e, system files)?
4) What data loss can I expect even if everything goes fine?
5)In some guides it was mentioned that I need to wipe many types of cache after installing TWRP,is it necessary?If yes,what are the names of those caches?
I am a complete noob when it comes to rooting so any help will be deeply appreciated.
Using kingrooy
---------- Post added at 12:03 PM ---------- Previous post was at 12:00 PM ----------
Or flash twrp, maybe the SuperSU will work
If can't, just use KingRoot.
You can find twrp for KitKat on the net.
Hello, I have been trying to fix this oddly specific issue with my Moto G7 running LineageOS. I can make and receive calls fine, but I have issues receiving texts. I can send them, but replies are delayed from a few minutes to an hour or two. I am unsure of why this has happened, but I remember trying to install LineageOS for Micro G and noticing this after. However, I didn't happen to be texting much before this, so it may not be relevant.
Anyways, I went to Verizon twice and they confirmed there was no issue with the sim card. However, when they tried replacing it, the system didn't recognize it at all and it couldn't even make a phone call.
I am honestly stuck and I do not know where to go from here. I've tried finding stock firmware but the issue persists after flashing what I THINK is the correct firmware and reinstalling. I really don't want to have to pay for a new phone (one that would likely be way more expensive than this one), so please give me anything I could work with.
Go back to stock 10, make calls and texts (including MMS), and then twrp, los17.1, gapps, root and start over
What's your phone model?
---------- Post added at 11:40 AM ---------- Previous post was at 11:39 AM ----------
Xt1962-1 from Amazon is mine
---------- Post added at 11:41 AM ---------- Previous post was at 11:40 AM ----------
https://mirrors.lolinet.com/firmware/moto/river/official/
---------- Post added at 11:49 AM ---------- Previous post was at 11:41 AM ----------
May have to erase modem partitions and then reinstall stock 10 using "adb shell" command while in fastboot mode:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/modemst1
dd if=/dev/zero of=/dev/block/bootdevice/by-name/modemst2
I have the same model, I'll try your solution now.
HueyT said:
Go back to stock 10, make calls and texts (including MMS), and then twrp, los17.1, gapps, root and start over
Click to expand...
Click to collapse
After installing the firmware, my device does not boot and stays on the unlocked bootloader warning. I can easily reinstall LineageOS, but my issue still persists.
CheeseESimp said:
After installing the firmware, my device does not boot and stays on the unlocked bootloader warning. I can easily reinstall LineageOS, but my issue still persists.
Click to expand...
Click to collapse
Do you mean that stock 10 won't boot? Any errors while installing stock 10? Which batch file did u use to automate all the fastboot commands?
Fastboot batch file
Unzip for bat file, put file in adb folder which should have all the files of stock ROM zip file that's been unzipped, and run it at dos prompt
https://forum.xda-developers.com/moto-g7/how-to/to-stock-relock-boot-loader-google-fi-t3966959
Is a guide to flashing stock rom (your rom will be different but the steps are similar except Q rom has 10 sparsechunks while PIE rom only has 9)
---------- Post added at 10:20 PM ---------- Previous post was at 10:18 PM ----------
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Is a guide to flashing via LMSA
HueyT said:
https://forum.xda-developers.com/moto-g7/how-to/to-stock-relock-boot-loader-google-fi-t3966959
Is a guide to flashing stock rom (your rom will be different but the steps are similar except Q rom has 10 sparsechunks while PIE rom only has 9)
---------- Post added at 10:20 PM ---------- Previous post was at 10:18 PM ----------
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Is a guide to flashing via LMSA
Click to expand...
Click to collapse
Okay I went back to stock and found that the issue was not present. I shall report this to the LineageOS devs or something. Is there anything else this could possibly be?
Once VZW drops CDMA and adopts GSM, this prob will be gone (1/2021)