Related
Hey guys,
I was hoping someone could point me in the right direction.
Problem:
No installed OS
I tried to get connection to via USB but i might be doing it wrong.
Using bootloader version: MANTALJ12, and it's unloocked with TWRP.
Is there someway i can put an OS onto the device?
I Tried:
Using the old Nexus 10 Root Tool Kit
and the Wug Nexus Root kit,
but they dont seems to be able to connect to transfer - or i might be doing it completely wrong.
Thanks,
toggich
should fix
Toggich said:
Hey guys,
I was hoping someone could point me in the right direction.
Problem:
No installed OS
I tried to get connection to via USB but i might be doing it wrong.
Using bootloader version: MANTALJ12, and it's unloocked with TWRP.
Is there someway i can put an OS onto the device?
I Tried:
Using the old Nexus 10 Root Tool Kit
and the Wug Nexus Root kit,
but they dont seems to be able to connect to transfer - or i might be doing it completely wrong.
Thanks,
toggich
Click to expand...
Click to collapse
First install the android SDK. (Just look it up I can't post links)
Get your factory image. (Just search nexus factory images)
Extract the image and place in the platform tools within the android SDK folder.
While in platform tools hold shift then right click and open command prompt.
Plug in your N10 while in fastboot and type (fastboot devices)
If a number comes up saying its connected you are good to go for the next step.
If its stuck in a bootloop before on the "X" symbol power it off then like your going to boot into boot loader hold power and keep pressing volume up and down in till it bring reset menu up reset it the boot back to boot loade
Then type these commands in order
1. fastboot erase boot
2. fastboot erase cache
3. fastboot erase recovery
4. fastboot erase system
5. fastboot erase user data
6. fastboot flash bootloader bootloader-manta-mantamd03.IMG
7. fastboot reboot-bootloader
8. fastboot -w update image-mantaray-jwr66V.zip
Let it finish and your done
AustinB16 said:
First install the android SDK. (Just look it up I can't post links)
Get your factory image. (Just search nexus factory images)
Extract the image and place in the platform tools within the android SDK folder.
While in platform tools hold shift then right click and open command prompt.
Plug in your N10 while in fastboot and type (fastboot devices)
If a number comes up saying its connected you are good to go for the next step.
If its stuck in a bootloop before on the "X" symbol power it off then like your going to boot into boot loader hold power and keep pressing volume up and down in till it bring reset menu up reset it the boot back to boot loade
Then type these commands in order
1. fastboot erase boot
2. fastboot erase cache
3. fastboot erase recovery
4. fastboot erase system
5. fastboot erase user data
6. fastboot flash bootloader bootloader-manta-mantamd03.IMG
7. fastboot reboot-bootloader
8. fastboot -w update image-mantaray-jwr66V.zip
Let it finish and your done
Click to expand...
Click to collapse
Thanks a for the replay, glad to say it's running again, better then ever :good:
Good day!
Hi Guys
I've followed the advice step by step but it get an error FAILED <remote: signature verification failed!>
any ideas how i can fix this.
thanks
Glenn
search it up
Glennfoot said:
Hi Guys
I've followed the advice step by step but it get an error FAILED <remote: signature verification failed!>
any ideas how i can fix this.
thanks
Glenn
Click to expand...
Click to collapse
Is your boot loader unlocked?
unlocked and twrp installed
Help
I am guessing these instructions are for Linux users? Any help for a windows user?
nope
JohnBlount said:
I am guessing these instructions are for Linux users? Any help for a windows user?
Click to expand...
Click to collapse
These are for windows
SOLVED!
Hi all i just bricked my phone : P9-lite VNS-L31
I managed to unlock bootloader, install twrp and get root permission. Phone worked great. Then i tried to flash xposed and the operation fails due to not enough memory space (!! i have 6gb) and get stuck in bootloop. I made all the possible things i knowed. Tried to use xposed-unistaller.zip (getting other errors like: "no such file o direcory") , wipe cache,dalvik and data and i try also to reflash stock recovery, and to relock bootloader (i can't do that.. why? i get FAILED <remote: command not allowed>) because erecovery and HiSuite can't restore my phone. What can i do?? It's a simple bootloop but i cant restore it. Please help me i have just bought the phone and now i'm very desperate.
I really hope some can help,
Thank you
Can you flash the stock rom through SD card?
Copy the stock rom file to this path: sd card\dload\UPDATE.APP,
Then, presss Volume + , Volume -, and the power keys to force upgrade your phone.
Hi, i solved my problem flashing system.img extracted by an official firmware. Everything ok. If someone need it i can write a little guide now to restore bricked p9-lite with custom recovery and unlocked bootloader (the normal procedure does not work)
Zeph1990 said:
Hi, i solved my problem flashing system.img extracted by an official firmware. Everything ok. If someone need it i can write a little guide now to restore bricked p9-lite with custom recovery and unlocked bootloader (the normal procedure does not work)
Click to expand...
Click to collapse
would you be so kind pls , and could you do the guide for me ? i somehow managed to ruin my phone , i can enter recovery , i can enter erecovery (wont download anything)
but what ever i tried didnt work :/ im getting kinda tilted , cus im trying to solve it for like 7hrs .. and im starting to be alot upset about it .. its like first time i cant repair it my self .. it hurts man (
so thanks for any help
So, i think i can help you to fix your phone.
First of all you need fastboot. So check fastboot drivers on your pc and make sure they work
Now download the stock firmware for VNS-L31 here : http://www.androidvillaz.com/2016/0...vns-l31-to-marshmallow-6.0-b100-firmware.html - It's the only version ready to download and an asian version but flashing only system you'll not notice it. All languages available, no differences at all.
Download and install this tool : http://forum.xda-developers.com/attachment.php?attachmentid=3262545
So using something like 7zip extract the UPDATE.APP file in your desktop for example.
Launch HuaweiUpdateExtractor and select the update.app.
You need to extract SYSTEM.IMG so right click on it and select extract selected.
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Wait about 3 minutes.
When flash finalize, boot in recovery. Wipe cache and dalvik and reboot your smartphone. It should boot now.
If not, perform a full wipe. (cache,dalvik and data).
Hope this can help.
Zeph1990 said:
So, i think i can help you to fix your phone.
First of all you need fastboot. So check fastboot drivers on your pc and make sure they work
Now download the stock firmware for VNS-L31 here : http://www.androidvillaz.com/2016/0...vns-l31-to-marshmallow-6.0-b100-firmware.html - It's the only version ready to download and an asian version but flashing only system you'll not notice it. All languages available, no differences at all.
Download and install this tool : http://forum.xda-developers.com/attachment.php?attachmentid=3262545
So using something like 7zip extract the UPDATE.APP file in your desktop for example.
Launch HuaweiUpdateExtractor and select the update.app.
You need to extract SYSTEM.IMG so right click on it and select extract selected.
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Wait about 3 minutes.
When flash finalize, boot in recovery. Wipe cache and dalvik and reboot your smartphone. It should boot now.
If not, perform a full wipe. (cache,dalvik and data).
Hope this can help.
Click to expand...
Click to collapse
with pressing volume - and power i enter into erecovery from there i should use fastboot to flash system.img ? sorry for being dum
edit: when in erecovery (volume- and power) typing fastboot flash system with full path , does nothing .. only saying waiting for device
edit2: no matter what i do , i cant fastboot flash system .. waiting for device .. only thing i can do is enter TWRP (also got root) , enter Erecovery and thats it .. phone only boots to huawei animation along wiht sound and thats it .. i tried adb sideload from TWRP but no help also .. guess there is nothing i can do right ?
Edit3: so i booted via TWRP to bootloader , used that fastboot command , flashed system , wiped cache , and now it is looking that phone is booting up !
thanks bro , any way i can pay you back ? cus you da MVP here !
EDIT4: well phone booted , rebooted , and now i cant enter recovery it boots into erecovery and i cant do nothing else
EDIT5: got into fastboot menu in phone , it says update system again , Error Func NO : 10 (boot image) Error NO : 2 (load failed)
EDIT6: somehow made it into fastboot , somehow flashed recovery , managed to restore my phone from back up , but sadly enough i cant restore it via google , since when i try to log in it says waiting .. dam this phone . i had galaxy S .. got this huawei just for pokemon go (which is pretty ****ty without gyro) FML right
EDIT7: lost most of my hairs .. some of them were ripped out in some anger explosions .. chewed of some of my nails .. but somehow i made it ! now if i only could unroot and relock bootloader xD think im gonna take a break for now and when my nerves will calm down i may try it again . Rly wanna thank you from all of my heart for help , thanks !! your the best man , thanks again
Sorry, can you normally boot and use your phone now?
Edit: It seems you can boot. Now you have restored your twrp recovery. I don't know why you have problems with google log in, but hey now it boots!
Zeph1990 said:
Sorry, can you normally boot and use your phone now?
Edit: It seems you can boot. Now you have restored your twrp recovery. I don't know why you have problems with google log in, but hey now it boots!
Click to expand...
Click to collapse
i cant thank you enough , without you i couldnt achieve this so thanks again !!
finaly did everything .. and only thing left is get bootloader locked and unroot it hope i will somehow find the way
So happy to hear it! =)
I tried also to relock bootloader during my attempts to unbrick the phone but i fail.. i don't know why, but i think someone was able to do it.
Zeph1990 said:
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Hope this can help.
Click to expand...
Click to collapse
Where did you launch the command? I can't do it in the huawei update extractor... Please help!!
Thank you.
ElPinguShow said:
Where did you launch the command? I can't do it in the huawei update extractor... Please help!!
Thank you.
Click to expand...
Click to collapse
Hi, if you don't know what is fastboot maybe you can approach it the easy way.
Download and install this for the correct drivers : http://consumer.huawei.com/minisite/HiSuite_en/index.html
Download and extract to a folder this : https://mega.nz/#!B4tATA5D!-TseQ9A-TPEQhzNQRXsT_cV2i4T7qYYLadceW0fM8k0
Put your phone in fastboot mode : Turn it off. Connect it to your pc . Long press vol - and power until it boots in fastboot mode (white screen with a green android and other stuff). If you want you can boot in fastboot from TWRP recovery : restart -> bootloader.
Copy your extracted SYSTEM.IMG in the root path of the tool (we can assume its name is system.img).
Now launch the tool and press 000 and enter.
If you have done all right now you can give this : fastboot flash system system.img
Wait about 3 minutes. Perform a cache and dalvik cache wipe. Boot your phone.
Zeph1990 said:
So, i think i can help you to fix your phone.
First of all you need fastboot. So check fastboot drivers on your pc and make sure they work
Now download the stock firmware for VNS-L31 here : http://www.androidvillaz.com/2016/0...vns-l31-to-marshmallow-6.0-b100-firmware.html - It's the only version ready to download and an asian version but flashing only system you'll not notice it. All languages available, no differences at all.
Download and install this tool : http://forum.xda-developers.com/attachment.php?attachmentid=3262545
So using something like 7zip extract the UPDATE.APP file in your desktop for example.
Launch HuaweiUpdateExtractor and select the update.app.
You need to extract SYSTEM.IMG so right click on it and select extract selected.
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Wait about 3 minutes.
When flash finalize, boot in recovery. Wipe cache and dalvik and reboot your smartphone. It should boot now.
If not, perform a full wipe. (cache,dalvik and data).
Hope this can help.
Click to expand...
Click to collapse
Hi,
I am using the standard P9, and getting the Boot Loop also.
I attempted your instructions, and appeared to work - I got the first EMUI initialization screen - and now its gone back to how it was.
Any suggestions?
I think it should work on every phone assuming you are using the right firmware. Do you use the right firmware for the huawei P9 ?? (needless to say it's not the version i posted)).
So if you flashed the right firmware (and i'm pretty sure of this) my advice is to perform a full wipe : Cache, dalvik and data.
If you are still facing the same error consider flashing other frimware parts like boot.img ecc.
I believe so - I am pretty clueless with this stuff.
By firmware, do you mean the stock version? Because I used P9-EVAL09-EVA-B136. Don't suppose you would know the right firmware I require?
I think it's the right version. I am a p9lite user so i don't know specifically the right version of the firmware but i think it's ok. Do you tried a full wipe?
Zeph1990 said:
I think it's the right version. I am a p9lite user so i don't know specifically the right version of the firmware but i think it's ok. Do you tried a full wipe?
Click to expand...
Click to collapse
How can I perform a full wipe? Thanks for replying by the way
So, do you have unlocked bootloader and custom recovery (TWRP) ?
Zeph1990 said:
So, do you have unlocked bootloader and custom recovery (TWRP) ?
Click to expand...
Click to collapse
I do yes
So, go in twrp recovery (turn off phone, long press vol up and power for at least 3 seconds). When you are in you will see 'WIPE' press it then do the swipe to Factory Reset. You will lost your installed apps and the relative settings but you will not lost your personal stuff such photo,music documents ecc. Let me know if you perform it and if it works =)
It appears that TWRP no longer appears. I get thr EMUI options to wipe data/factory reset. But once I do this I just get a red exclamation mark.
Does the phone need to be plugged in via USB?
Hello guys, my zenfone has the image "ASUS in search of incredible" on the center and upward has the written ""Fastboot Mode!!! long press power key to restart system""" in light blue!! i readed other similiar threads but i'm unable to resolve, i tried to download the official rom on the asus site and i follow threads of other models of zenfone 2 hardbricked in the Fastboot mode!
like this! ----((Type fastboot devices and hit Enter. Your device should appear.
13. Type fastboot flash fastboot droidboot.img (be very careful in writting this line). Hit Enter. Wait till it's done.
14. Type fastboot flash recovery recovery.img and hit Enter. Wait till it's done.
15. Type fastboot flash boot boot.img and hitEnter.))
I don't find those files (and files like system.img) in the zenfone 2 laser rom zip(UL-ASUS_Z00E-WW-13.10.7.1-user.zip) but only Boot.img ,system.new.dat... nothing useful.
I dowloaded a official recovery and twrp, i tried to flash the recovery.img and the boot.img and i try to reboot in bootloader mode but nothing, than i tried to flash the trwp.img but the process failed!
I've a Raw file image of the rom but i don't know if it possible to install it in fastboot and what is the right Command on fastboot!
This is all, i hope that someone can help me
Download stock recovery from here and flash with fastboot flash recovery name_of_recovery.img and download official firmware from official site.
Go in to recovery and wipe cache and data,after select update from adb,open adb and write this command:adb sideload name_of_firmware.zip or put firmware.zip in to sd and rename update.zip go in to recovery wipe cache and data and select update from sdcard and select update.zip
thank you for the response, after the flash of the original recovery, i tried to go in recovery with "volume - and power botton" but nothing only asus image, than i tried with fastboot command --->"fastboot boot recovery.img" and Failed( remote dtb not found)
Marlin92 said:
thank you for the response, after the flash of the original recovery, i tried to go in recovery with "volume - and power botton" but nothing only asus image, than i tried with fastboot command --->"fastboot boot recovery.img" and Failed( remote dtb not found)
Click to expand...
Click to collapse
Go in to fastboot,from adb flash stock recovery recovery (mm 16) and reboot in to recovery
Gabbro16Hz said:
Go in to fastboot,from adb flash stock recovery recovery (mm 16) and reboot in to recovery[/QUO
ok i did it, but the phone don't reboot in to recovery... this is the problem....
Click to expand...
Click to collapse
Marlin92 said:
Gabbro16Hz said:
Go in to fastboot,from adb flash stock recovery recovery (mm 16) and reboot in to recovery[/QUO
ok i did it, but the phone don't reboot in to recovery... this is the problem....
Click to expand...
Click to collapse
It's impossible,you nave unlocked bootloader?
Click to expand...
Click to collapse
Gabbro16Hz said:
Marlin92 said:
It's impossible,you nave unlocked bootloader?
Click to expand...
Click to collapse
i think no mate, because the phone it's not mine , i'm trying to help my friend that tried to root the phone but failed ahahahah ...
You know if is possible to unlock the bootloader now in fastboot mode and what is the command to write? thank you for the patience
Click to expand...
Click to collapse
Marlin92 said:
Gabbro16Hz said:
i think no mate, because the phone it's not mine , i'm trying to help my friend that tried to root the phone but failed ahahahah ...
You know if is possible to unlock the bootloader now in fastboot mode and what is the command to write? thank you for the patience
Click to expand...
Click to collapse
This is the solutionowload official Recovery and flash,go in to recovery and select adb sideload go in adb from pc and write:adb sideload Name_Of_Firmware.zip
Click to expand...
Click to collapse
Gabbro16Hz said:
Marlin92 said:
This is the solutionowload official Recovery and flash,go in to recovery and select adb sideload go in adb from pc and write:adb sideload Name_Of_Firmware.zip
Click to expand...
Click to collapse
nothing! My friend doesn't remember if he unlocked the bootloader, the phone doesn't go in recovery... So the problem is the unlocked bootloader or a locked bootloader?!
from your answer I understand that if it is unlocked i can go in recovery, so i assume that the bootloader it's locked and for this i can't go in recovery...
Click to expand...
Click to collapse
I'm with a similar problem, I did not do the unlock bootloader but I can install TWRP with no problems. But my biggest problem is the time of system.img where it appears the following error: error: file too large
i'm stuck in asus screen to :crying:
Sorry for my bad english
pudiim1 said:
I'm with a similar problem, I did not do the unlock bootloader but I can install TWRP with no problems. But my biggest problem is the time of system.img where it appears the following error: error: file too large
i'm stuck in asus screen to :crying:
Sorry for my bad english
Click to expand...
Click to collapse
same here! i converted the system.new.dat file in system.img and tried to flash it, but it appears the same error" file too large...
One question your phone after the flash of TWRP doesn't go in recovery right?
Marlin92 said:
same here! i converted the system.new.dat file in system.img and tried to flash it, but it appears the same error" file too large...
One question your phone after the flash of TWRP doesn't go in recovery right?
Click to expand...
Click to collapse
Recovery mode work's fine for my, but I can not install or via adb or via fastboot
pudiim1 said:
I'm with a similar problem, I did not do the unlock bootloader but I can install TWRP with no problems. But my biggest problem is the time of system.img where it appears the following error: error: file too large
i'm stuck in asus screen to :crying:
Sorry for my bad english
Click to expand...
Click to collapse
but if you can install the TWRP and you can go in to recovery, you can install with adb sideload the all file stock rom zip
Marlin92 said:
but if you can install the TWRP and you can go in to recovery, you can install with adb sideload the all file stock rom zip
Click to expand...
Click to collapse
I tried many, many zip files and i had different errors , the more I got the most was the following : Could not find ' meta- inf / com / google / android / update -binary ' in the zip file .
pudiim1 said:
I tried many, many zip files and i had different errors , the more I got the most was the following : Could not find ' meta- inf / com / google / android / update -binary ' in the zip file .
Click to expand...
Click to collapse
you've tried to clean all with the command " fastboot erase" boot,cache,system and userdata? i'm not sure if this work but in almost all guides recommended to erase old boot, cache, system & userdata partitions
I tried but no sucess
i try instaling cortex 7.00( 7.1.2) after al is ok after the phone reboot evry time when i using i try wipe data with twrp
after reboot the phon don t rebot just bootloop i try unstaling stock image with toolkit evry think is ok but the same brob just bootloop i can enter in fastboot mode but not in stock recovery
samone know the solution ?or my fhone is dead
leroilion02 said:
i try instaling cortex 7.00( 7.1.2) after al is ok after the phone reboot evry time when i using i try wipe data with twrp
after reboot the phon don t rebot just bootloop i try unstaling stock image with toolkit evry think is ok but the same brob just bootloop i can enter in fastboot mode but not in stock recovery
samone know the solution ?or my fhone is dead
Click to expand...
Click to collapse
Since your phone is unlocked, I would try to flash a full Google image using the included flash-all.bat (instructions are on the same page as the image downloads). Not being able to access recovery mode may indicate a more serious problem.
v12xke said:
Since your phone is unlocked, I would try to flash a full Google image using the included flash-all.bat (instructions are on the same page as the image downloads). Not being able to access recovery mode may indicate a more serious problem.
Click to expand...
Click to collapse
do you think my phone still alive
leroilion02 said:
do you think my phone still alive
Click to expand...
Click to collapse
Too early to tell. Google intended the image files to be a foolproof way to "reset" the phone to factory stock. This is the first thing you have to try. Set up ADB/Fastboot on your PC and use it to communicate with, and send commands to your phone.
I've gotten myself into the same situation a few times and flashing the full stock image with flash-all.bat command has always gotten me out of it so far. After I'm back on stock I just start from scratch again and flash recovery, custom rom and root.
jhs39 said:
I've gotten myself into the same situation a few times and flashing the full stock image with flash-all.bat command has always gotten me out of it so far. After I'm back on stock I just start from scratch again and flash recovery, custom rom and root.
Click to expand...
Click to collapse
i flash the full factory image with fastboot all is ok after fishing just bootloop i don t know what is the probleme
leroilion02 said:
i flash the full factory image with fastboot all is ok after fishing just bootloop i don t know what is the probleme
Click to expand...
Click to collapse
fastboot FORMAT (not erase or wipe) userdata, cache and system capturing the screen (or text from each command). Try flash-all.bat again. Which image are you flashing?
v12xke said:
fastboot FORMAT (not erase or wipe) userdata, cache and system capturing the screen (or text from each command). Try flash-all.bat again. Which image are you flashing?
Click to expand...
Click to collapse
the last android 7.1.1
when i flash with flash-all.bat the note progresse he stop with message fichier not fond
leroilion02 said:
the last android 7.1.1
when i flash with flash-all.bat the note progresse he stop with message fichier not fond
Click to expand...
Click to collapse
do you think my phone can reboot
leroilion02 said:
do you think my phone can reboot
Click to expand...
Click to collapse
Can you enter recovery mode after all you have tried? Or do you only have access to fastboot in broader?
Sent from my Nexus 6P using XDA-Developers Legacy app
CyberpodS2 said:
Can you enter recovery mode after all you have tried? Or do you only have access to fastboot in broader?
Sent from my Nexus 6P using XDA-Developers Legacy app
Click to expand...
Click to collapse
just fastboot
leroilion02 said:
do you think my phone can reboot
Click to expand...
Click to collapse
I don't know, you're providing conflicting information. What happened when you fastboot formatted each of the 3 partitions?
v12xke said:
I don't know, you're providing conflicting information. What happened when you fastboot formatted each of the 3 partitions?
Click to expand...
Click to collapse
when i flash the phon on fastboot al is ok the bootloader after the radio after the system after vendor all ok the phon just bootloop
when i try flash with flash-all.bat the procedur don t progress just the radio and bootlaoder after just error message files don t exist
leroilion02 said:
when i flash the phon on fastboot al is ok the bootloader after the radio after the system after vendor all ok the phon just bootloop
when i try flash with flash-all.bat the procedur don t progress just the radio and bootlaoder after just error message files don t exist
Click to expand...
Click to collapse
No. Fastboot FORMAT the 3 partitions (for the 3rd time). Capture the response from each of these commands:
fastboot format userdata
fastboot format cache
fastboot format system
v12xke said:
No. Fastboot FORMAT the 3 partitions (for the 3rd time). Capture the response from each of these commands:
fastboot format userdata
fastboot format cache
fastboot format system
Click to expand...
Click to collapse
ok i try tomorow and i tell you the Result
I have the wt86047(HM2014813,HM2XTDPro) and I have dead emmc on my phone. The internal /data /system and /cache partitions are unmountable. So I decided that I try to boot from sdcard.
I have used this tutorial Dual boot to partition my sdcard and modify the recovery and the rom(Lineage 14.1) to look for the system, data and cache partitions on sdcard.
But when I try to boot up the phone is stuck at the MI logo and I see my device in fastboot. To be able to boot to my device I need in fastboot to execute fastboot boot modifiedboot.img. This is not too much convenient as I need pc to turn my phone on. I also can only boot recovery and not to get to the recovery mode. I can however flash the image to the /recovery partition. I suspect that my /boot partition is also corrupted. I tried to manualy flash boot also with no succes. Any ideas how to boot the phone without need to use fastboot?
I have the exact same issue with the same phone.
You have modified only the fstab file ?
nings008 said:
I have the exact same issue with the same phone.
You have modified only the fstab file ?
Click to expand...
Click to collapse
In boot.img yes(fstab.qcom), in TWRP the etc/recovery.fstab and in the updater script any mention of /system and /data.
The phone boots with the fastboot boot, but it is quite slow as I have quite cheap sd card in it. I would buy a better one If I would be able to boot the phone without computer.
EDIT: Camera is also not working for some reason
Try folding the fastboot ROM.
Same thing happened to me. I tried and flashed the fastboot image. It worked. This happened to me a long time ago. Don't worry about bootloader if you can see the fastboot screen with the mi man on your phone .
http://bigota.d.miui.com/V8.0.1.0.K...DG_20160805.0000.29_4.4_global_daca6227c0.tgz
This is the link for the fastboot file for Redmi 2 aka wt88047 or any other version of the Redmi 2.
Just use the following method to flash using ADB and should be successful.
Steps to Flash MIUI Fasboot ROM Without Using Mi Flash Tool {Using Command Prompt}
We would like to suggest that Please use the Official Flashing method through Mi Flash Tool if that method didn’t work for you then try this method.
Below is the overall method to Flash MIUI 8/9 Using Command Prompt. The commands use in this method are pretty common. For most of the users are familiar with this Commands.
Quick Requirments:
Download Fastboot ROM of your device.
Xiaomi USB Driver & ADB Driver of your device.
Try Mi PC Suite if above USB Driver doesn’t work for you.
Flash MIUI Fastboot ROM Using Command Prompt
1. Download the Fastboot ROM you want to flash from the above download link. Extract the Downloaded Fastboot ROM in your Windows PC.
2. Enter into Download Folder. You will see some Files & Folder out there. Again go to Images Folder.
3. Boot your device into Fastboot Mode. To do this Switch off your phone. Now, Press Power Button + Volume Down button to boot your device into Fastboot Mode.
4.In that folder “Open Command Window” by Holding Shift Button + Right Click button of the mouse. You will see Command Prompt will open there.
5.Type following Command to check whether your device is connected or not.
fastboot devices
6. Below the command, If it shows the device then you are ready to flash. Now, Execute following commands one by one to flash the whole ROM.
fastboot flash system system.img
Press Enter to Continue
fastboot flash boot boot.img
Press Enter to Continue
fastboot flash recovery recovery.img
Press Enter to Continue
fastboot flash cache cache.img
Press Enter to Continue
Want Complete erase of data? All Data will be deleted it will be like new device. Then type this following commands.
fastboot erase userdata
Press Enter to Continue
fastboot flash userdata userdata.img
Press Enter to Continue
All Flashing process in complete. Now, Type the following code & hit enter button to Reboot your device normally.
fastboot reboot
That’s it! Congratulation! You have successfully Installed Latest MIUI Fastboot ROM. Your device bootloader is locked now & You device is unrooted. Please let me know if it helped.
d2211basu said:
Same thing happened to me. I tried and flashed the fastboot image. It worked. This happened to me a long time ago. Don't worry about bootloader if you can see the fastboot screen with the mi man on your phone .
Click to expand...
Click to collapse
This won't help. This is the hardware issue. The storage chip on the motherboard is dead. You can not write anything to it. It is possible to replace that chip but it is a quite difficult operation.
tulen_kobi said:
Any ideas how to boot the phone without need to use fastboot?
Click to expand...
Click to collapse
Looking for the same.
https://forum.xda-developers.com/android/help/how-to-boot-sd-card-qmobile-z8-bricked-t3712171
Redmi 2 Hard Bricked or Boot Dead Repair
tulen_kobi said:
I have the wt86047(HM2014813,HM2XTDPro) and I have dead emmc on my phone. The internal /data /system and /cache partitions are unmountable. So I decided that I try to boot from sdcard.
I have used this tutorial Dual boot to partition my sdcard and modify the recovery and the rom(Lineage 14.1) to look for the system, data and cache partitions on sdcard.
But when I try to boot up the phone is stuck at the MI logo and I see my device in fastboot. To be able to boot to my device I need in fastboot to execute fastboot boot modifiedboot.img. This is not too much convenient as I need pc to turn my phone on. I also can only boot recovery and not to get to the recovery mode. I can however flash the image to the /recovery partition. I suspect that my /boot partition is also corrupted. I tried to manualy flash boot also with no succes. Any ideas how to boot the phone without need to use fastboot?
Click to expand...
Click to collapse
Follow This Link
https://globaltech2u.com/how-to-bring-a-boot-dead-or-hard-bricked-redmi-2-back-to-life