Hello everyone, I'm new to the forum, I'm looking for help with a Moto X style XT1575. I tell you the problem: I bought a Moto X Style used on the internet and it turns out that WiFi does not work, the phone is with MM 6.0.1. Entering Configuration, WiFi, you see a line with movement, as if the phone is still searching for networks with the switch turned off and when you try to activate it, it immediately goes back on by itself. I was reading a bit about this error and it seems quite repeated, not only in this model but also in other Motorola. I saw cases in which besides the WiFi also does not work the Bluetooth, in my case the problem is only in the Wifi. The phone is not rooted or anything, it is factory and reset, I am not sure if it is free but apparently yes, because I accepted sims from two different companies.
Could you help me solve this? From already thank you very much
(I'm using the Google translator, sorry if something I say is not understood)
NamelessGhoulx said:
Hello everyone, I'm new to the forum, I'm looking for help with a Moto X style XT1575. I tell you the problem: I bought a Moto X Style used on the internet and it turns out that WiFi does not work, the phone is with MM 6.0.1. Entering Configuration, WiFi, you see a line with movement, as if the phone is still searching for networks with the switch turned off and when you try to activate it, it immediately goes back on by itself. I was reading a bit about this error and it seems quite repeated, not only in this model but also in other Motorola. I saw cases in which besides the WiFi also does not work the Bluetooth, in my case the problem is only in the Wifi. The phone is not rooted or anything, it is factory and reset, I am not sure if it is free but apparently yes, because I accepted sims from two different companies.
Could you help me solve this? From already thank you very much
(I'm using the Google translator, sorry if something I say is not understood)
Click to expand...
Click to collapse
Is the bootloader unlocked?
No, I think it was officially updated to MM and was left with this problem.
NamelessGhoulx said:
No, I think it was officially updated to MM and was left with this problem.
Click to expand...
Click to collapse
If the bootloader is locked the solution i can think of is to flash the latest firmware (if available).
If there any hardware fault then flashing firmware won't fix this.
Reflash MM? Would that fix the WiFi? I have read cases where the official update itself generates the problem, and they flash the modem and it works, without having to reload the whole system. I do not really know what to do
NamelessGhoulx said:
Reflash MM? Would that fix the WiFi? I have read cases where the official update itself generates the problem, and they flash the modem and it works, without having to reload the whole system. I do not really know what to do
Click to expand...
Click to collapse
Go here
https://forum.xda-developers.com/moto-x-style/general/xt1575-stock-mphs24-49-18-16-files-t3641863
And flash non-hlos.bin and fsg.bin (at your own risk)
This may fix it.
And don't forget to see if the build version matches.
It looks like the versions match. To do this I have to unlock the bootloader and root the phone, is that correct? I'm a rookie, you'll see
NamelessGhoulx said:
It looks like the versions match. To do this I have to unlock the bootloader and root the phone, is that correct? I'm a rookie, you'll see
Click to expand...
Click to collapse
Those are stock images so i don't think you need to unlock bootloader. Just flash via fastboot.
Only flash non-hlos.bin and fsg and also Bluetooth if Bluetooth isn't working.
You can flash via fastboot?
In that post says it's for Pure and my phone is Style. I know they are the same but that clarification made me doubt.
I have not tried because I do not understand how to do it, I see many posts about this and I do not know where to start
NamelessGhoulx said:
In that post says it's for Pure and my phone is Style. I know they are the same but that clarification made me doubt.
I have not tried because I do not understand how to do it, I see many posts about this and I do not know where to start
Click to expand...
Click to collapse
Read carefully the first and second line of the screenshot you have given. It show moto x pure edition.
Update to Nougat would solve this or would it be better to try to flash only those files as it is now in MM?
I could only update using my operator's internet
NamelessGhoulx said:
Update to Nougat would solve this or would it be better to try to flash only those files as it is now in MM?
I could only update using my operator's internet
Click to expand...
Click to collapse
You can't update using mobile data you have to use wifi.
Marshmallow doesn't allow updates via mobile data.
But u can use other mobile and creat wifi hotspot to update.
U can try updating. But in cause some thing break you may have to unlock your bootloader.
And is nougut available for xt1575?
Yes, Nougat is now available for some regions. How can i create a hotspot if te phone does not have WiFi? Can not connect to any network
NamelessGhoulx said:
Yes, Nougat is now available for some regions. How can i create a hotspot if te phone does not have WiFi? Can not connect to any network
Click to expand...
Click to collapse
Oh,right forgot about that.
You can use nougut update zip for xt1575 (if available i couldn't find any)
Or flash is the last option.(i don't know any other fix).
Do you have adb and fastboot in your pc?
No. I'm totally new, I do not understand practically anything
NamelessGhoulx said:
No. I'm totally new, I do not understand practically anything
Click to expand...
Click to collapse
Alright, you are going to want to download minimal fastboot and adb drivers for PC (assuming you are on windows?) https://forum.xda-developers.com/showthread.php?t=2317790&page=70 You do not need an unlocked bootloader or need to be rooted to be able to flash stock. @yk1999 provided the correct file, and so just Google how to flash the commands @yk1999 said. Or follow this guide of how to relock bootloader.
https://forum.xda-developers.com/mo...rn-to-stock-relock-bootloader-t3489110/page33
Edit : the commands are fastboot flash...and then the file names that @yk1999 posted. This should be enough. Download the file I linked you for fastboot and adb, turn on us debugging in settings, and then flash away!
NamelessGhoulx said:
No. I'm totally new, I do not understand practically anything
Click to expand...
Click to collapse
Install adb
Goto bootloader
Connect your usb cable to pc
Press enter after writing each line
fastboot flash modem non-hlos.bin(path to non-hlos.bin)
fastboot flash fsg fsg(path to fsg)
fastboot erase modemst1
fastboot erase modemst2
fastboot erase cache
fastboot reboot
Thanks to both of you. I do not need the drivers of the phone?
NamelessGhoulx said:
Thanks to both of you. I do not need the drivers of the phone?
Click to expand...
Click to collapse
Drivers are included with adb but you can install Motorola device manager it will also install drivers. Search it on Google.
Many thanks to both, I could solve it. They really saved me, I do not know how to thank them
Related
Hi.
I work in China ow and then and i bought my self a Lenovo K920 yesterday. A GREAT phone but sadly the it does not have any Google programs/system but just a similar Chinese system which i know nothing about. I have found some ROMs out there but on some forum people warns about flashing the Chinese K920pro as it will brick.
Any one here who could tell me how to proceed.... Thanks
__ZOOM__ said:
Hi.
I work in China ow and then and i bought my self a Lenovo K920 yesterday. A GREAT phone but sadly the it does not have any Google programs/system but just a similar Chinese system which i know nothing about. I have found some ROMs out there but on some forum people warns about flashing the Chinese K920pro as it will brick.
Any one here who could tell me how to proceed.... Thanks
Click to expand...
Click to collapse
There's a video showing how to unlock the developer option in settings and the switch to Google UI is inside the Developer Option. Looks quite awesome, im gonna own this phone later.
AyieStyx said:
There's a video showing how to unlock the developer option in settings and the switch to Google UI is inside the Developer Option. Looks quite awesome, im gonna own this phone later.
Click to expand...
Click to collapse
Yes, i read about this too..... I have the Developer Option available already (a few taps on the version number) but no Google UI option there, just 3 options to chose from. Or do you know how to get more options?
I did a try a russian "2014-10-14--10-16-45 K920_ROW_S126_140825.7z" with their "twrp_2.8.0.1_recovery_K920Pro.7z" file but it "killed" my phone....
I can still access the Lenovo Re ovey and the root menu though.. But the operating system just hangs at the Chinese 4G logo.....
Im not able to restart the TWRP again. I start to dislike this odd phone now after spending 30-40 hours to try to get google play, gmail etc to work.. I should have bought a HTC or Samsung instead..
__ZOOM__ said:
I did a try a russian "2014-10-14--10-16-45 K920_ROW_S126_140825.7z" with their "twrp_2.8.0.1_recovery_K920Pro.7z" file but it "killed" my phone....
I can still access the Lenovo Re ovey and the root menu though.. But the operating system just hangs at the Chinese 4G logo.....
Im not able to restart the TWRP again. I start to dislike this odd phone now after spending 30-40 hours to try to get google play, gmail etc to work.. I should have bought a HTC or Samsung instead..
Click to expand...
Click to collapse
You shouldn't do that at the early release of the phone. Even any phone. You need to wait for the official rom release. How about you try fastboot and flash the twrp/cwm recovery. From the recovery use sideload to reflash the stock rom. Keep in mind that you should wait for a review or someone who actually successfully flash the custom roms/non-official rom. Except root, theres a number of successful root.
AyieStyx said:
You shouldn't do that at the early release of the phone. Even any phone. You need to wait for the official rom release. How about you try fastboot and flash the twrp/cwm recovery. From the recovery use sideload to reflash the stock rom. Keep in mind that you should wait for a review or someone who actually successfully flash the custom roms/non-official rom. Except root, theres a number of successful root.
Click to expand...
Click to collapse
I know but i was desperate to get Google to work... Bricked or Chines system is same same for me...
Fastboot and TWRP cant find any device. Factory reset or wipe did not help either. Can access boot menu and Lenovo recovery, but need a recovery file first, and then we have problem with that i cant access the phones internal storage.... And this crap has no SD-memory either...
$700 down the drain for sure... Still have to buy a new phone though, and im still in China... Have to fly to HK to get a new phone... This is going to be expensive.
Thats what happen when you flash the unofficial rom. You know the risk. Make sure you have installed fastboot driver and adb driver. Im sure you can reflash the rom after you able to enter fastboot
AyieStyx said:
Thats what happen when you flash the unofficial rom. You know the risk. Make sure you have installed fastboot driver and adb driver. Im sure you can reflash the rom after you able to enter fastboot
Click to expand...
Click to collapse
Drivers are okay and have worked before. But now when running ABD Devices command, it show "? unautorized" so i get stuck there.
I SOLVED IT....... Except that the both SIM-card shows a red X.. but everything else seems, camera, GPS, WiFi to work AND it has GOODLE PLAY etc now.. Anyone know how to make the phone to work again?
I have tried ABD, Fastboot, TWRP, MiFlash, QPST, QMSCT_DL_EMMC_TOOL but nothing worked except following this instruction
I used the files in the Bin-folder of K920_ROW_S126_140825_user_1408251128 rom
https://forums.lenovo.com/t5/Lenovo-Phones/Lenovo-K910-Vibe-Z-bricked/m-p/1611710#M6838
Flashed back to the Chinese version and the SIM-cards works again... Any idea why the SIM-cards stops to work on the ROW rom?????
__ZOOM__ said:
Flashed back to the Chinese version and the SIM-cards works again... Any idea why the SIM-cards stops to work on the ROW rom?????
Click to expand...
Click to collapse
Slightly different hardware and radio modules.
On lenovo forum there is something about radio calibration.
Hi guys,
Im getting PMs about this...
Yes, I have resolved it. It works to 100% with all i have tested. I will share it with you as soon im back from my business trip in a week or two.
Z
__ZOOM__ said:
Hi guys,
Im getting PMs about this...
Yes, I have resolved it. It works to 100% with all i have tested. I will share it with you as soon im back from my business trip in a week or two.
Z
Click to expand...
Click to collapse
Hi,
can you share with us the method you used to flash row rom on a Chinese K920?
thanks
row rom on china k920
i have chinese version of k920 and i hate the chinese rom on it!Is it possible to explain how can i have the row version working on my phone and have the radio fixed and have the two sim working!I tested row rom and my sims didnt work (no signal).Any help will be appreciated!
lenovo K920 how to active sim card
Hello good friend merry christmas.I have lenovo k920 Chinese version and I flashed the rom k920_ROW_S126_140825, only sim that do not work, how did you solved this? rom the Chinese version was not able to install google play.Can you help me solve this problem ? thank you
flash row rom to china k920pro
-Download ROW firmware in needrom.com and download CN rom modem file.
-Copy the downloaded "NON-HLOS.bin" file.
-Paste "NON-HLOS.bin" to ROW Rom bin folder.
-Flash Row rom the phone (QPST)
Finaly simple and basicly solution.
CN rom Modem file: https://mega.co.nz/#!mMIilAzZ!9DB3fn-69ewVKzdwWFdeTeKL7Si7zf9gims6Cl7OTMk
soulfreem said:
-Download ROW firmware in needrom.com and download CN rom modem file.
-Copy the downloaded "NON-HLOS.bin" file.
-Paste "NON-HLOS.bin" to ROW Rom bin folder.
-Flash Row rom the phone (QPST)
Finaly simple and basicly solution.
CN rom Modem file: https://mega.co.nz/#!mMIilAzZ!9DB3fn-69ewVKzdwWFdeTeKL7Si7zf9gims6Cl7OTMk
Click to expand...
Click to collapse
Did you try it? Is it work?
vgiazitzis said:
Did you try it? Is it work?
Click to expand...
Click to collapse
of course it works otherwise i wouldnt post the solution.After you flash the rom everything works flawlessly but dont update ota to the latest version because you will lose the radio again.
Thank you very much. I will try it right now.
soulfreem said:
of course it works otherwise i wouldnt post the solution.After you flash the rom everything works flawlessly but dont update ota to the latest version because you will lose the radio again.
Click to expand...
Click to collapse
2 sims works? Could you explain me the what I do? The qualcomm program is in chinese. Please. Thank you
Does anyone know any other way to get marshmallow on my rooted device? I have TWRP on there and am trying to side-load, but everytime i click on adb sideload on my phone, the phone disappears from my computer. I have tried many things to no avail. I apologize if this has already been asked elsewhere. TIA!
yandawg said:
Does anyone know any other way to get marshmallow on my rooted device? I have TWRP on there and am trying to side-load, but everytime i click on adb sideload on my phone, the phone disappears from my computer. I have tried many things to no avail. I apologize if this has already been asked elsewhere. TIA!
Click to expand...
Click to collapse
You could use the return to stock tool in the development section and just take the OTA. Then you can just reflash TWRP.
Thanks for the quick response, but I have done that a couple of times and i have received the OTA, but the install always fails. I am using the RTS program that has the file that starts out with CLARK_RETUS_5.1.1_LPH23.116-18.......... Is there another that i should be using? BTW, I am on the European 1572 variant if that matters. Thanks again for the reply!
I've got the same problem, I'm on the 1572 instead of the 1575 and not sure on what to do with the return to stock tool
I just went through this yesterday. I tried the twrp but got no WiFi even with flashing the modem. I tried return to stick and failed the first time. I tried return to stick the second time but flashed the modem file by itself again and then the MM upgrade worked. That is the only thing I did differently.
watmartin said:
I've got the same problem, I'm on the 1572 instead of the 1575 and not sure on what to do with the return to stock tool
Click to expand...
Click to collapse
dont use the return to stock tool for the xt1575 on the xt1572, you need to get the xt1572 firmware from here: http://forum.xda-developers.com/moto-x-style/development/pure-firmware-tuff-wip-t3224833 get it, and unzip it, then get this: https://drive.google.com/file/d/0BzsA17IjC5k2Y203VklsVDhseDQ/view?usp=sharing and put it in the same directory, make sure you have fastboot installed system wide, otherwise put the files in the same directory as the images, boot the phone into fastboot mode (power + vol down), plug into computer, and run the flash-all batch script, once done, the phone should reboot into stock 5.1.1
nitros12 said:
dont use the return to stock tool for the xt1575 on the xt1572, you need to get the xt1572 firmware from here: http://forum.xda-developers.com/moto-x-style/development/pure-firmware-tuff-wip-t3224833 get it, and unzip it, then get this: https://drive.google.com/file/d/0BzsA17IjC5k2Y203VklsVDhseDQ/view?usp=sharing and put it in the same directory, make sure you have fastboot installed system wide, otherwise put the files in the same directory as the images, boot the phone into fastboot mode (power + vol down), plug into computer, and run the flash-all batch script, once done, the phone should reboot into stock 5.1.1
Click to expand...
Click to collapse
Could I message you on Skype or something about this? I'm kinda lost... My Skype is ________ if you can. Sorry man...
My apologies. I didn't catch you were on 1572. Was on my way out of the house and answered quickly.
Oaklands said:
My apologies. I didn't catch you were on 1572. Was on my way out of the house and answered quickly.
Click to expand...
Click to collapse
no problem oaklands! Thanks for trying to help out! I believe I have flashed to 5.1.1 alright, but for some reason I can't update. It don't seem like my modem wants to work or something. I flashed a new one and everything. Any thoughts? TIA
I am interesting also,
I have rooted EU version 1572, and cant wait for Marshmallow. Is there a solution to update from Lollipop to Marshamallow right now?
yandawg said:
no problem oaklands! Thanks for trying to help out! I believe I have flashed to 5.1.1 alright, but for some reason I can't update. It don't seem like my modem wants to work or something. I flashed a new one and everything. Any thoughts? TIA
Click to expand...
Click to collapse
I can only tell you the only thing I did differently after returning to stock was to flash the non-hlos.bin file in fastboot a second time. I believe that is the correct file name. I am not at home to verify. That is all it took for me. I would try again. I have seen others that have repeated steps that did not work the first time to have it work the next time.
Keep in mind I am on US 1575 version but I don't see why it wouldn't work for you as long as you have the proper files. I would initially get to 15 or 20% and it would just fail with no error code.
I was just trying to get a good signal on 4G and carelessly tapped on the USA band option in "change radio band" in the testing menu as mentioned above. Please help me with this as I don't have a good 4G signal where I live (India, if that's relevant), and calls keep dropping.
Solve
thealonso said:
I was just trying to get a good signal on 4G and carelessly tapped on the USA band option in "change radio band" in the testing menu as mentioned above. Please help me with this as I don't have a good 4G signal where I live (India, if that's relevant), and calls keep dropping.
Click to expand...
Click to collapse
I have the same problem. You have flashing stock again. It's only way.
QZmichal said:
I have the same problem. You have flashing stock again. It's only way.
Click to expand...
Click to collapse
Did you get the issue resolved?
Solve
thealonso said:
Did you get the issue resolved?
Click to expand...
Click to collapse
Yes, this is a solution to the problem.
Remember never set radio band to USA.
Is it possible to fix this by flashing only the modem file?
QZmichal said:
Yes, this is a solution to the problem.
Remember never set radio band to USA.
Click to expand...
Click to collapse
Could you please tell me in detail how you did it? I really need some help with this issue.
Mayby
pijes said:
Is it possible to fix this by flashing only the modem file?
Click to expand...
Click to collapse
Maybe, but with access to the root. Flashing the original software does not require unlocked bootloader.
QZmichal said:
Yes, this is a solution to the problem.
Remember never set radio band to USA.
Click to expand...
Click to collapse
Could I just the take the phone to the service centre? They can fix it without any hassle I suppose?
Answer
thealonso said:
Could I just the take the phone to the service centre? They can fix it without any hassle I suppose?
Click to expand...
Click to collapse
They may provide such services. You can fix it yourself (It takes me than 10 minutes), but if you have concerns it's better to do it for someone with experience.
Regards.
QZmichal said:
They may provide such services. You can fix it yourself (It takes me than 10 minutes), but if you have concerns it's better to do it for someone with experience.
Regards.
Click to expand...
Click to collapse
I'll visit the service centre first and check if they can fix it. If they can't I'll PM you, because I'll need some help through the process. I couldn't even find how to download the image from Github LOL.
QZmichal said:
Maybe, but with access to the root. Flashing the original software does not require unlocked bootloader.
Click to expand...
Click to collapse
I did flash the modem on my old droid maxx without root. It was done using fastboot commands.
If you don't mind losing all your files, I recommend flashing the stock 6.0 completely. Sometimes service center does this too and they don't care about your data assuming you already backed up everything.
Moto X pure edition XT1575 model has same issue
pijes said:
I did flash the modem on my old droid maxx without root. It was done using fastboot commands.
If you don't mind losing all your files, I recommend flashing the stock 6.0 completely. Sometimes service center does this too and they don't care about your data assuming you already backed up everything.
Click to expand...
Click to collapse
Hi
I recently bought MOTO X pure edition XT1575 from US and i changed the radio band to USA accidental.
Now in India its not showing up any network. Its not detecting any cellular network. Could you please help me to fix the issue.
vickyy2 said:
Hi
I recently bought MOTO X pure edition XT1575 from US and i changed the radio band to USA accidental.
Now in India its not showing up any network. Its not detecting any cellular network. Could you please help me to fix the issue.
Click to expand...
Click to collapse
Take out sim
Code:
fastboot erase modemst1
Fastboot erase modemst2
Fastboot erase cache
Insert sim
bablu048 said:
Take out sim
Code:
fastboot erase modemst1
Fastboot erase modemst2
Fastboot erase cache
Insert sim
Click to expand...
Click to collapse
Hi
Thanks for the reply. Could you please elaborate more on what needs to be done. where to execute those commands. I am not familiar with andriod configs. moreover what are the softwares we need to use to do this fastboot
vickyy2 said:
Hi
Thanks for the reply. Could you please elaborate more on what needs to be done. where to execute those commands. I am not familiar with andriod configs. moreover what are the softwares we need to use to do this fastboot
Click to expand...
Click to collapse
1- install this http://forum.xda-developers.com/showthread.php?t=2317790 on your pc
2- phone-settings-[tap on build no 7 times to enable developer settings]- go bacck to settings---you'll see developer settings
3- enable ''''adb debugging''' in developer settings
4- connect phone to pc and run 'minimal fastboot that you installed'
Code:
adb devices
accept the prompt on your device to allow adb, now you should be able to see your device
5-take out sim
6- switch off phone. press '''''''vol[down]+power'''''' to boot into bootloader--connect to PC
7- now run those commands and reboot
bablu048 said:
1- install this http://forum.xda-developers.com/showthread.php?t=2317790 on your pc
2- phone-settings-[tap on build no 7 times to enable developer settings]- go bacck to settings---you'll see developer settings
3- enable ''''adb debugging''' in developer settings
4- connect phone to pc and run 'minimal fastboot that you installed'
Code:
adb devices
accept the prompt on your device to allow adb, now you should be able to see your device
5-take out sim
6- switch off phone. press '''''''vol[down]+power'''''' to boot into bootloader--connect to PC
7- now run those commands and reboot
Click to expand...
Click to collapse
I couldn't locate the adb settings in my phone. after enabling the developer options.
My phone uses Andriod 6.0 mashmellow
vickyy2 said:
I couldn't locate the adb settings in my phone. after enabling the developer options.
My phone uses Andriod 6.0 mashmellow
Click to expand...
Click to collapse
its in developer options
bablu048 said:
its in developer options
Click to expand...
Click to collapse
Hi I did the same way you mentioned and it worked for me , thanks for your guidance and timely help
bablu048 said:
1- install this http://forum.xda-developers.com/showthread.php?t=2317790 on your pc
2- phone-settings-[tap on build no 7 times to enable developer settings]- go bacck to settings---you'll see developer settings
3- enable ''''adb debugging''' in developer settings
4- connect phone to pc and run 'minimal fastboot that you installed' accept the prompt on your device to allow adb, now you should be able to see your device
5-take out sim
6- switch off phone. press '''''''vol[down]+power'''''' to boot into bootloader--connect to PC
7- now run those commands and reboot
Click to expand...
Click to collapse
will this work on moto x force? I did the same thing and am not getting any network. regretting the mistake for almost a month. HELP.
I recovered 2G/3G in Moto G5, here are revised recovery instructions step-by-step for dummies
Original posts by bablu048: post#13 & post#15
Big Thanks to bablu048 !!!
read here
Recovering 2G/3G after Set Radio band to USA in the hidden Testing menu (*#*#INFO#*#*)
1 - Download This File and extract
https://drive.google.com/file/d/0ByH4eje3nMs-dl91VGk2SjRvdDg/view?usp=sharing
2 - Inside folder and double-click the bat file and a command window will be shown up.
------------------------------------------------------------------------------------------------------------
Flash orginal Firmware = Relock_and_format.bat
Relock Bootloader = Relock_and_format.bat
Unbrick = Relock_and_format.bat
Unroot = Relock_and_format.bat
Logo fix = OnlyLogo.bat
Repair Modem = OnlyModem.bat
Firmware version : Android 6.0 - XT1575_CLARK_RETUS_6.0_MPHS24.49-18-3 (Latest version) (24.201.3.clark_retus_en_US)
How is this different from the other recovery scripts/threads?
What specific version of firmware is included?
gpz1100 said:
How is this different from the other recovery scripts/threads?
What specific version of firmware is included?
Click to expand...
Click to collapse
this best. because, i test all other method but my phone did not relock.
When I tried this method, phone is relocked and everything work without error.
Thank you, thank you, thank you!
You are a life saver! This is the only method that worked for me after struggling for a couple of days trying to overcome errors wen I tried to flash stock and re-lock the bootloader. :good::good::good: Will this allow the OTA update and receive Motorola updates?
relock bl returns te warranty?
no. there is no reason to ever relock this phone.
So,if you want to receive Motorola OTA Updates, you only need to unroot and return to stock recovery?
Rotondo said:
relock bl returns te warranty?
Click to expand...
Click to collapse
No
You have to use motorola's website to get the unlock code. They know you unlocked, warranty still void.
I can't thank you enough for this thread!!! I've run through several of these and yours has been the only one to include the most recent security patch!!! You are a STAR!
Thank you for making this easy!
Awesome!
This worked beautifully, I can't thank you enough.
Update** Since using this to un soft brick my device, My bootloader seems to be in a weird place, It says "Device unlocked Status code 3". I followed directions from Motorollas site to relock boot loader nothing in ADB or Fastboot flashes. I tried re unlocking it fails. im not sure what happened. any suggestions would be great though! thanks.
THANK U!!!!
so I tried like 3 other methods to restore my xt1575 after I soft bricked it like an idiot... This was the easiest, quickest method by a long shot.... I wish I could shake ur hand sir! Thank u soooo much....
Edit : Now...it seems...my Bluetooth wont turn on....I've tried resetting network settings, clearing data under BT sharing in App Manager settings, and doing a full factory reset. Ive rebooted numerous times as well. I cannot, for the life of me , get BT to turn on! I'm about to flash TWRP, wipe, and install AICP... IDK..... has this ever happened to anyone? anyone got any idea's?
svensudels said:
so I tried like 3 other methods to restore my xt1575 after I soft bricked it like an idiot... This was the easiest, quickest method by a long shot.... I wish I could shake ur hand sir! Thank u soooo much....
Edit : Now...it seems...my Bluetooth wont turn on....I've tried resetting network settings, clearing data under BT sharing in App Manager settings, and doing a full factory reset. Ive rebooted numerous times as well. I cannot, for the life of me , get BT to turn on! I'm about to flash TWRP, wipe, and install AICP... IDK..... has this ever happened to anyone? anyone got any idea's?
Click to expand...
Click to collapse
The firmware and procedure in the OP are outdated, doing any flashing via a batch file is highly frowned upon as you cannot see if any piece fails and judging from the date of the OP the firmware is out of date.
Aside from that, if just the BT isn't working, you likely need to reflash the BT firmware... it should be included in the firmware you downloaded, go to that directory and execute "fastboot flash bluetooth BTFM.bin" to reflash the BT firmware partition. I am not sure what fastboot is included in this firmware archive, so it that fails try it as "mfastboot fastboot bluetooth BTFM.bin".
If BTFM.bin does not exist in this firmware archive, try over from scratch, look in my signature for a more up to date method of restoring stock and (optionally) relocking the bootloader.
acejavelin said:
The firmware and procedure in the OP are outdated, doing any flashing via a batch file is highly frowned upon as you cannot see if any piece fails and judging from the date of the OP the firmware is out of date.
Aside from that, if just the BT isn't working, you likely need to reflash the BT firmware... it should be included in the firmware you downloaded, go to that directory and execute "fastboot flash bluetooth BTFM.bin" to reflash the BT firmware partition. I am not sure what fastboot is included in this firmware archive, so it that fails try it as "mfastboot fastboot bluetooth BTFM.bin".
If BTFM.bin does not exist in this firmware archive, try over from scratch, look in my signature for a more up to date method of restoring stock and (optionally) relocking the bootloader.
Click to expand...
Click to collapse
THANK U! this worked 1st try! u sir, are a gentleman & a scholar!
svensudels said:
THANK U! this worked 1st try! u sir, are a gentleman & a scholar!
Click to expand...
Click to collapse
Glad you got it resolved.
Hello there! The link seems to be corrupted not available anymore . Where can I find the link?
Thank you for your excellent work
osk4rin said:
Hello there! The link seems to be corrupted not available anymore . Where can I find the link?
Thank you for your excellent work
Click to expand...
Click to collapse
This guide and it's files are outdated, and seems to be abandoned... look at one of the more current tutorials like the one in my signature maybe.
So I updated to G900VVRU2DPF4 and my phone was working fine until when I rebooted one of these times. Now I am getting 'Unfortunatly Sytem UI has stopped.' so I hit ok then the sreen goes blank with my homescreen wallpaper (and starts blinking from black to the wallpaper Except when I hit the lock button then It locks) and I can't do a thing. I recently turned off ADB on the phone so I can't do nothing there and I tried clear cache that did not work. I read that I need to erase the data on the system ui under setting, apps... but I can't even get into setting. I DO NOT WANT TO FACTORY RESET THE PHONE and erase all my files. There must be a way to fix it. I tried remote controlling via wifi (like with google's device manger and Samsung findmyphone) but now the phone won't connect to wifi for some reason it won't turn on. I am trying to sideload Samsung Good Lock because that might fix it also but I can't. I need help big time. When I connect it the the computer it kinda read it but I can't get files off the phone but it shows up and Unassuming Kies/Smart Switch does not work either. There must be a fix without loosing data. Help Please? :'-(
P.S. I tried adb sideload the PF4 updated in recovery and that did not fix it.
jakeh9777 said:
So I updated to G900VVRU2DPF4 and my phone was working fine until when I rebooted one of these times. Now I am getting 'Unfortunatly Sytem UI has stopped.' so I hit ok then the sreen goes blank with my homescreen wallpaper (and starts blinking from black to the wallpaper Except when I hit the lock button then It locks) and I can't do a thing. I recently turned off ADB on the phone so I can't do nothing there and I tried clear cache that did not work. I read that I need to erase the data on the system ui under setting, apps... but I can't even get into setting. I DO NOT WANT TO FACTORY RESET THE PHONE and erase all my files. There must be a way to fix it. I tried remote controlling via wifi (like with google's device manger and Samsung findmyphone) but now the phone won't connect to wifi for some reason it won't turn on. I am trying to sideload Samsung Good Lock because that might fix it also but I can't. I need help big time. When I connect it the the computer it kinda read it but I can't get files off the phone but it shows up and Unassuming Kies/Smart Switch does not work either. There must be a fix without loosing data. Help Please? :'-(
P.S. I tried adb sideload the PF4 updated in recovery and that did not fix it.
Click to expand...
Click to collapse
What is your setup? Are you rooted?
Nandr0idC0nsumer said:
What is your setup? Are you rooted?
Click to expand...
Click to collapse
No I am not. Fully stocked. I had good lock installed before but I turned on finger unlock and good lock did not support finger unlock so it uninstalled.
I am kinda waiting also on sammobile to post the latest firmware. Since I heard you can update &/or reinstall the firmware without loading files like apps and stuff. (excpet if you are not on official stock) But I still would like some help.
jakeh9777 said:
No I am not. Fully stocked. I had good lock installed before but I turned on finger unlock and good lock did not support finger unlock so it uninstalled.
I am kinda waiting also on sammobile to post the latest firmware. Since I heard you can update &/or reinstall the firmware without loading files like apps and stuff. (excpet if you are not on official stock) But I still would like some help.
Click to expand...
Click to collapse
Try downgrading to PD1 via Odin? Maybe that will allow you to recover your data...
Nandr0idC0nsumer said:
Try downgrading to PD1 via Odin? Maybe that will allow you to recover your data...
Click to expand...
Click to collapse
Even though it's an update before? Or should I wait for PF4. But I do in w they both are 6.0.1 and also I do have it downloaded but I used Sam Firm tool (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647) or should I get the one from Sammobile?
jakeh9777 said:
Even though it's an update before? Or should I wait for PF4. But I do in w they both are 6.0.1 and also I do have it downloaded but I used Sam Firm tool (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647) or should I get the one from Sammobile?
Click to expand...
Click to collapse
Get PD1 from SamMobile, and flash it thru Odin. I'm hoping this won't make anything worse but it should let us recover your data (that's the hope)
Nandr0idC0nsumer said:
Get PD1 from SamMobile, and flash it thru Odin. I'm hoping this won't make anything worse but it should let us recover your data (that's the hope)
Click to expand...
Click to collapse
Ok! Yeah my friend had a brick issue like a soft brick. And he was on stock also so he downloaded his firmware and installed it... It did not wipe his. I hope it doesn't wipe mine. My only problem is that I have fast internet but since I don't have a premium account on sammobile it will take 2 hours that why I was asking about SamFirm tool.
jakeh9777 said:
Ok! Yeah my friend had a brick issue like a soft brick. And he was on stock also so he downloaded his firmware and installed it... It did not wipe his. I hope it doesn't wipe mine. My only problem is that I have fast internet but since I don't have a premium account on sammobile it will take 2 hours that why I was asking about SamFirm tool.
Click to expand...
Click to collapse
SamFirm ONLY allows to download the latest firmware (which is PF4), and we need PD1 :good:
If you were rooted we could have just done an "adb shell" into your phone and gotten all the data off, or simply use the built-in File Manager of Safestrap or TWRP.
Nandr0idC0nsumer said:
SamFirm ONLY allows to download the latest firmware (which is PF4), and we need PD1 :good:
If you were rooted we could have just done an "adb shell" into your phone and gotten all the data off, or simply use the built-in File Manager of Safestrap or TWRP.
Click to expand...
Click to collapse
I have PD1 I was trying to get PF4 with SamFirm but it downloaded PD1 so I was confused. That's all. I know about that was rooted while back once before but I messed things up so I unrooted.
So can use that one?
Nandr0idC0nsumer said:
SamFirm ONLY allows to download the latest firmware (which is PF4), and we need PD1 :good:
If you were rooted we could have just done an "adb shell" into your phone and gotten all the data off, or simply use the built-in File Manager of Safestrap or TWRP.
Click to expand...
Click to collapse
Thanks for the help... it's Fixed!
jakeh9777 said:
Thanks for the help... it's Fixed!
Click to expand...
Click to collapse
Great!