Set radio band to USA in the testing menu (*#*#4636#*#*) and I can't 2G/3G signal! - X Play Q&A, Help & Troubleshooting

I was just trying to get a good signal on 4G and carelessly tapped on the USA band option in "change radio band" in the testing menu as mentioned above. Please help me with this as I don't have a good 4G signal where I live (India, if that's relevant), and calls keep dropping.

Solve
thealonso said:
I was just trying to get a good signal on 4G and carelessly tapped on the USA band option in "change radio band" in the testing menu as mentioned above. Please help me with this as I don't have a good 4G signal where I live (India, if that's relevant), and calls keep dropping.
Click to expand...
Click to collapse
I have the same problem. You have flashing stock again. It's only way.

QZmichal said:
I have the same problem. You have flashing stock again. It's only way.
Click to expand...
Click to collapse
Did you get the issue resolved?

Solve
thealonso said:
Did you get the issue resolved?
Click to expand...
Click to collapse
Yes, this is a solution to the problem.
Remember never set radio band to USA.

Is it possible to fix this by flashing only the modem file?

QZmichal said:
Yes, this is a solution to the problem.
Remember never set radio band to USA.
Click to expand...
Click to collapse
Could you please tell me in detail how you did it? I really need some help with this issue.

Mayby
pijes said:
Is it possible to fix this by flashing only the modem file?
Click to expand...
Click to collapse
Maybe, but with access to the root. Flashing the original software does not require unlocked bootloader.

QZmichal said:
Yes, this is a solution to the problem.
Remember never set radio band to USA.
Click to expand...
Click to collapse
Could I just the take the phone to the service centre? They can fix it without any hassle I suppose?

Answer
thealonso said:
Could I just the take the phone to the service centre? They can fix it without any hassle I suppose?
Click to expand...
Click to collapse
They may provide such services. You can fix it yourself (It takes me than 10 minutes), but if you have concerns it's better to do it for someone with experience.
Regards.

QZmichal said:
They may provide such services. You can fix it yourself (It takes me than 10 minutes), but if you have concerns it's better to do it for someone with experience.
Regards.
Click to expand...
Click to collapse
I'll visit the service centre first and check if they can fix it. If they can't I'll PM you, because I'll need some help through the process. I couldn't even find how to download the image from Github LOL.

QZmichal said:
Maybe, but with access to the root. Flashing the original software does not require unlocked bootloader.
Click to expand...
Click to collapse
I did flash the modem on my old droid maxx without root. It was done using fastboot commands.
If you don't mind losing all your files, I recommend flashing the stock 6.0 completely. Sometimes service center does this too and they don't care about your data assuming you already backed up everything.

Moto X pure edition XT1575 model has same issue
pijes said:
I did flash the modem on my old droid maxx without root. It was done using fastboot commands.
If you don't mind losing all your files, I recommend flashing the stock 6.0 completely. Sometimes service center does this too and they don't care about your data assuming you already backed up everything.
Click to expand...
Click to collapse
Hi
I recently bought MOTO X pure edition XT1575 from US and i changed the radio band to USA accidental.
Now in India its not showing up any network. Its not detecting any cellular network. Could you please help me to fix the issue.

vickyy2 said:
Hi
I recently bought MOTO X pure edition XT1575 from US and i changed the radio band to USA accidental.
Now in India its not showing up any network. Its not detecting any cellular network. Could you please help me to fix the issue.
Click to expand...
Click to collapse
Take out sim
Code:
fastboot erase modemst1
Fastboot erase modemst2
Fastboot erase cache
Insert sim

bablu048 said:
Take out sim
Code:
fastboot erase modemst1
Fastboot erase modemst2
Fastboot erase cache
Insert sim
Click to expand...
Click to collapse
Hi
Thanks for the reply. Could you please elaborate more on what needs to be done. where to execute those commands. I am not familiar with andriod configs. moreover what are the softwares we need to use to do this fastboot

vickyy2 said:
Hi
Thanks for the reply. Could you please elaborate more on what needs to be done. where to execute those commands. I am not familiar with andriod configs. moreover what are the softwares we need to use to do this fastboot
Click to expand...
Click to collapse
1- install this http://forum.xda-developers.com/showthread.php?t=2317790 on your pc
2- phone-settings-[tap on build no 7 times to enable developer settings]- go bacck to settings---you'll see developer settings
3- enable ''''adb debugging''' in developer settings
4- connect phone to pc and run 'minimal fastboot that you installed'
Code:
adb devices
accept the prompt on your device to allow adb, now you should be able to see your device
5-take out sim
6- switch off phone. press '''''''vol[down]+power'''''' to boot into bootloader--connect to PC
7- now run those commands and reboot

bablu048 said:
1- install this http://forum.xda-developers.com/showthread.php?t=2317790 on your pc
2- phone-settings-[tap on build no 7 times to enable developer settings]- go bacck to settings---you'll see developer settings
3- enable ''''adb debugging''' in developer settings
4- connect phone to pc and run 'minimal fastboot that you installed'
Code:
adb devices
accept the prompt on your device to allow adb, now you should be able to see your device
5-take out sim
6- switch off phone. press '''''''vol[down]+power'''''' to boot into bootloader--connect to PC
7- now run those commands and reboot
Click to expand...
Click to collapse
I couldn't locate the adb settings in my phone. after enabling the developer options.
My phone uses Andriod 6.0 mashmellow

vickyy2 said:
I couldn't locate the adb settings in my phone. after enabling the developer options.
My phone uses Andriod 6.0 mashmellow
Click to expand...
Click to collapse
its in developer options

bablu048 said:
its in developer options
Click to expand...
Click to collapse
Hi I did the same way you mentioned and it worked for me , thanks for your guidance and timely help

bablu048 said:
1- install this http://forum.xda-developers.com/showthread.php?t=2317790 on your pc
2- phone-settings-[tap on build no 7 times to enable developer settings]- go bacck to settings---you'll see developer settings
3- enable ''''adb debugging''' in developer settings
4- connect phone to pc and run 'minimal fastboot that you installed' accept the prompt on your device to allow adb, now you should be able to see your device
5-take out sim
6- switch off phone. press '''''''vol[down]+power'''''' to boot into bootloader--connect to PC
7- now run those commands and reboot
Click to expand...
Click to collapse
will this work on moto x force? I did the same thing and am not getting any network. regretting the mistake for almost a month. HELP.

I recovered 2G/3G in Moto G5, here are revised recovery instructions step-by-step for dummies
Original posts by bablu048: post#13 & post#15
Big Thanks to bablu048 !!!
read here
Recovering 2G/3G after Set Radio band to USA in the hidden Testing menu (*#*#INFO#*#*)

Related

[Q] Nexus 4 Lollipop 5.1 How do I enable LTE 4G

I updated to stock 5.1 from 5.0.2 yesterday. Prior to this I had LTE 4G on T-Mobile. Now I'm back to 3G . Does anyone else have this experience? and are ther any solutions out there I could use?
I'd value any input or advice on this issue.
Thanks
I tried too to revert 4g on my 5.1 n4 but after i wiped everything ( excepting system ... ) i got a lovely bsod ( blank screen of death ) i don't think is a sollution yet , if i done something wrong someone please explain us how to get it properly back w/o probs , wait for some ideas thanks .
You'll obviously need to be sure the hybrid modem is installed. Beyond that as I recall, I had to "force" it to see the LTE network by dialing *#*#4636#*#* and selecting "LTE only" for the connection. After that I was able to set it to "LTE/GSM auto" and it has worked correctly since.
jherbold said:
You'll obviously need to be sure the hybrid modem is installed. Beyond that as I recall, I had to "force" it to see the LTE network by dialing *#*#4636#*#* and selecting "LTE only" for the connection. After that I was able to set it to "LTE/GSM auto" and it has worked correctly since.
Click to expand...
Click to collapse
I tried that but it did not offer the ability to make that change. I could on 5.0.2. I'm not sure where to get the hybrid modem? any Ideas would be helpful. also does anyone know which hybrid modem to use for T-mobile? Thanks
Go to settings -> About Phone
The Android software version number and baseband (modem) version will be listed. If the last 2 digits of the baseband version is greater than 33, you will not have LTE capability.
https://play.google.com/store/apps/details?id=me.bpear.makomodem
jherbold said:
Go to settings -> About Phone
The Android software version number and baseband (modem) version will be listed. If the last 2 digits of the baseband version is greater than 33, you will not have LTE capability.
https://play.google.com/store/apps/details?id=me.bpear.makomodem
Click to expand...
Click to collapse
Thanks for the reply and info.
I did check that, but I'm not clear what you mean when you refer the Baseband Version last 2 digits
I also have that App installed and it does how seem to work with 5.1 It does not look like its been updated recently
any Ideas?
jherbold said:
You'll obviously need to be sure the hybrid modem is installed. Beyond that as I recall, I had to "force" it to see the LTE network by dialing *#*#4636#*#* and selecting "LTE only" for the connection. After that I was able to set it to "LTE/GSM auto" and it has worked correctly since.
Click to expand...
Click to collapse
Thank you man , you are the best , i followed your instructions , flashed the latest modem from the app (1.03 + 0.33 LTE Hybrid Modem) then enabled LTE Only in test menu , that was , thanks againd , already pressed the button , next time i give a beer
Are there instructions on how to apply the appropriate modem type and such?
marioc89 said:
Are there instructions on how to apply the appropriate modem type and such?
Click to expand...
Click to collapse
Download: https://drive.google.com/file/d/0B77BTW0zStYCS2JPNG1kNnNIamM/view?usp=sharing (LTE Enabler 2.13)
Reboot to Recovery and flash above LTE .zip
Reboot
Done
I'm sorry for being a little slow on this, but when you say reboot to recovery, what do you mean exactly? I have the file downloaded though. Is this a hack or is this something that was made for this phone by Google? I guess what I'm asking is, could I screw up my phone from doing this and if I do, can I revert back to where I had it prior to this if it doesn't work or don't like it?
marioc89 said:
I'm sorry for being a little slow on this, but when you say reboot to recovery, what do you mean exactly? I have the file downloaded though. Is this a hack or is this something that was made for this phone by Google? I guess what I'm asking is, could I screw up my phone from doing this and if I do, can I revert back to where I had it prior to this if it doesn't work or don't like it?
Click to expand...
Click to collapse
I guess you are asking the same questions in 2 threads. Download the enabler listed above to your pc.
Start up the Nexus Root Tool Kit
Connect your phone via usb
Then use the advance options and flash the filefrom your pc to your phone
I hope this helps Let meknow how it goes
marioc89 said:
I'm sorry for being a little slow on this, but when you say reboot to recovery, what do you mean exactly? I have the file downloaded though. Is this a hack or is this something that was made for this phone by Google? I guess what I'm asking is, could I screw up my phone from doing this and if I do, can I revert back to where I had it prior to this if it doesn't work or don't like it?
Click to expand...
Click to collapse
To help your self out It might be useful if you read the post from the following link http://forum.xda-developers.com/showpost.php?p=60115195&postcount=771
It will help you understand the whole process and how to do it. It will also give you lots of background on the issue.
To perform the "Flash" I use the Nexus Root Toolkit. which can be found here.
I hope this helps you. Let us know how it goes
This is perfect! Thank you!
I'm noticing that the settings done keep after a reboot. I don't have to reflash the modem, but I do have to go back into the 4636 settings to re-enable LTE. I've heard this might be fixable in the build.prop? Any thoughts?
ariesgodofwar said:
Download: https://drive.google.com/file/d/0B77BTW0zStYCS2JPNG1kNnNIamM/view?usp=sharing (LTE Enabler 2.13)
Reboot to Recovery and flash above LTE .zip
Reboot
Done
Click to expand...
Click to collapse
Can I do this straight from the phone or from a laptop? And what zip app do I open it with?
marioc89 said:
Can I do this straight from the phone or from a laptop? And what zip app do I open it with?
Click to expand...
Click to collapse
You do it straight from your phone. Download the file, boot into your Recovery, go to the folder you saved the file in (likely in your "Downloads" folder, and just flash the .zip file from your Phone's recovery, and it will do all the necessaries.
It worked flawlessly when I flashed that zip from recovery. All relevant settings changed from 3G to 4G and HSPA to LTE. Speed went from 10 to 36mbps (Telus Canada). ROM is 5.1.1 LMY48T
Hjicons said:
It worked flawlessly when I flashed that zip from recovery. All relevant settings changed from 3G to 4G and HSPA to LTE. Speed went from 10 to 36mbps (Telus Canada). ROM is 5.1.1 LMY48T
Click to expand...
Click to collapse
Did you flash from a custom recovery, twrp or cwm, or stock recovery ?
Sent from my Nexus 6 using Tapatalk
trent999 said:
Did you flash from a custom recovery, twrp or cwm, or stock recovery ?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
TWRP. BTW I tried different hybrid modems with "Nexus 4 Modem Flasher" app without any success.
ariesgodofwar said:
Download: https://drive.google.com/file/d/0B77BTW0zStYCS2JPNG1kNnNIamM/view?usp=sharing (LTE Enabler 2.13)
Reboot to Recovery and flash above LTE .zip
Reboot
Done
Click to expand...
Click to collapse
Thanks that got almost work for me but it says its for android 5.1+ and I am on android 6.0.1 aosp ROM.
But after that I flashed this and bingoo. I can use LTE only in Android 6.
Used this http://www.mediafire.com/?2thymqa7fiiyrqy
Now I can able to click on 'only LTE' from phone info
And it stays at LTE only.
Before this when I goto phone info and it got gsm or wcdma even I click on LTE now its working for me.
I found that zip file from anywhere else I don't know where so I had uploaded and shared here.
Here is what I found about version check. Give it a try if you wish
a) expand nexus-4-lte-enabler-v2.13.zip
b) edit META-INF\com\google\android\updater-script
c) replace 5.1 with 6.0.1 in this line
( is_substring("5.1", file_getprop("/system/build.prop","ro.build.version.release")) )
d) update zip with new file
e) flash zip
Sent from my Nexus 6 using Tapatalk

Nexus 6P(Stock) - 6.0 - Verizon Data Roaming not Working

Hello,
I am in South Africa and I can not get data to work. I have validated all settings:
Data Roaming is on.
Cellular Data is on
Preferred Network Type is Global (I have also changed to LTE / GSM / UMTS with no success)
I have removed SIM card / placed back in.
I have reset all network settings
I have placed into Safe Mode
I have called Verizon Global Support and they have validated all settings.
All without success
Android Version - 6.0
Security Patch level - November 1, 2015
Is there anything I am missing? This is frustrating.
on your phone dialer type *#*#4636#*#* then from the top menu select change band and select USA band and restart your phone.
chichu_9 said:
on your phone dialer type *#*#4636#*#* then from the top menu select change band and select USA band and restart your phone.
Click to expand...
Click to collapse
Thanks - I forget to mention I did in fact try that previously without success as well.
chichu_9 said:
on your phone dialer type *#*#4636#*#* then from the top menu select change band and select USA band and restart your phone.
Click to expand...
Click to collapse
Sorry, I did not previously perform the step you out-lined. I thought you were referring to restarting the band.
I just did as you instructed and now the phone is not connecting to the South African networks(previously phone and SMS worked.
Now in the Cellular Network Settings, there is a new option 'System Select' which is selected to 'Automatic' with the other option 'Home only.'
Ideas?
smripley said:
Thanks - I forget to mention I did in fact try that previously without success as well.
Click to expand...
Click to collapse
Did you check you have all the APN's setup in your device? you should see 6 in that list. Verizon Internet APN should be selected.
chichu_9 said:
Did you check you have all the APN's setup in your device? you should see 6 in that list. Verizon Internet APN should be selected.
Click to expand...
Click to collapse
With regards to the APN, I only have four:
EHRPD - VZW Roaming CBS
EHRPD - VZW Roaming IMS
LTE - VZW Roaming FOTA
LTE - VZW Roaming Internet
And nothing is selected.
@chichu_9
Can you help? After selecting USA band, phone is no longer connecting to the cellular network...
smripley said:
@chichu_9
Can you help? After selecting USA band, phone is no longer connecting to the cellular network...
Click to expand...
Click to collapse
Change your band to Band 6. turn off your phone and restart.
As for System select, it should be set to Change CDMA roaming Mode. Preferred network type, set it to Global.
For APN, if nothing is selected then select the one that says, Roaming Internet.
chichu_9 said:
Change your band to Band 6. turn off your phone and restart.
As for System select, it should be set to Change CDMA roaming Mode. Preferred network type, set it to Global.
Click to expand...
Click to collapse
Tried that and it does not work.
smripley said:
Tried that and it does not work.
Click to expand...
Click to collapse
Sorry added more comments take a look at it. I had a similar issue in Mexico, I made the following changes to make it work. Once you get your network connected, then you can go back and change it to USA band if you want.
chichu_9 said:
Sorry added more comments take a look at it. I had a similar issue in Mexico, I made the following changes to make it work. Once you get your network connected, then you can go back and change it to USA band if you want.
Click to expand...
Click to collapse
System Select should be 'Automatic?' I tried both 'Automatic and 'Home Only' and the other settings you specified and it is still not connecting.
I also did a factory reset and still not working??
Please help/
smripley said:
System Select should be 'Automatic?' I tried both 'Automatic and 'Home Only' and the other settings you specified and it is still not connecting.
I also did a factory reset and still not working??
Please help/
Click to expand...
Click to collapse
OK, if none of those are working. Then your best bet is to reflash a radio. You will have to unlock your bootloader, Go to fastboot mode and use the flash all script, to reflash a factory image to your device.
There is a thread in the General help section, that can guide you thru the process. Remember unlocking bootloader will wipe your phone clean.
chichu_9 said:
OK, if none of those are working. Then your best bet is to reflash a radio. You will have to unlock your bootloader, Go to fastboot mode and use the flash all script, to reflash a factory image to your device.
There is a thread in the General help section, that can guide you thru the process. Remember unlocking bootloader will wipe your phone clean.
Click to expand...
Click to collapse
So, I'm going down that path, downloaded the 'angler' image for the Nexus 6P, unlocked the bootloader, issue ./flash-all.sh and it comes back(using terminal on mac) and says:
--------------------------------------------
Bootloader Version...: angler-02.01
Baseband Version.....: angler-02.15
Serial Number........: xxxxxxx
--------------------------------------------
checking product...
FAILED
Device product is 'angler'.
Update requires 'bullhead'.
__
I need to download 'bullhead' then - although it says that is for the Nexus 5x? Feel like something is jacked.
smripley said:
So, I'm going down that path, downloaded the 'angler' image for the Nexus 6P, unlocked the bootloader, issue ./flash-all.sh and it comes back(using terminal on mac) and says:
--------------------------------------------
Bootloader Version...: angler-02.01
Baseband Version.....: angler-02.15
Serial Number........: xxxxxxx
--------------------------------------------
checking product...
FAILED
Device product is 'angler'.
Update requires 'bullhead'.
__
I need to download 'bullhead' then - although it says that is for the Nexus 5x? Feel like something is jacked.
Click to expand...
Click to collapse
Something is not right. It should ask you to download Angler not Bullhead. Dont install Bullhead on your device. Do you have the right version of ADB fastboot?
chichu_9 said:
Something is not right. It should ask you to download Angler not Bullhead. Dont install Bullhead on your device. Do you have the right version of ADB fastboot?
Click to expand...
Click to collapse
Yes, I believe I do.
Can you link me to the files just in case?
smripley said:
Yes, I believe I do.
Can you link me to the files just in case?
Click to expand...
Click to collapse
I downloaded the new files from here:
http://forum.xda-developers.com/nex...stboot-mac-t3234755/post63519142#post63519142
smripley said:
I downloaded the new files from here:
http://forum.xda-developers.com/nex...stboot-mac-t3234755/post63519142#post63519142
Click to expand...
Click to collapse
Here you go https://dl.google.com/dl/android/aosp/angler-mmb29m-factory-8c31db3f.tgz
chichu_9 said:
Here you go https://dl.google.com/dl/android/aosp/angler-mmb29m-factory-8c31db3f.tgz
Click to expand...
Click to collapse
I'm an idiot. I downloaded 'bullhead' instead of 'angler' from the beginning. Flash is going through now - hopefully this will fix the radio problem. Will report back shortly.
smripley said:
I'm an idiot. I downloaded 'bullhead' instead of 'angler' from the beginning. Flash is going through now - hopefully this will fix the radio problem. Will report back shortly.
Click to expand...
Click to collapse
Restored factory image and still not working. Not connecting.
What should I do?
smripley said:
Restored factory image and still not working. Not connecting.
What should I do?
Click to expand...
Click to collapse
What is not working? What is not connecting now? if its only the Data part, then did you go back and re-enable data roaming?

[Request]Stock firmware with June security update

Hi there,
Can anyone please upload the full firmware with the June security update?
I'm having problem while flashing this firmware.
Facing error something like this in fastboot,
(bootloader) Downgrade Security update.
Previously I had installed AOSPEX. And forgot to turn on the USB Debugging before flashing the stock firmware.
Please help.
Hello
Hi ,
I am also facing the same problem.Is your phone bricked?
keyur1131 said:
Please help.
Click to expand...
Click to collapse
Don't try to update the bootloader or the partition table (GPT). Skip those commands. The flash will work fine.
zeomal said:
Don't try to update the bootloader or the partition table (GPT). Skip those commands. The flash will work fine.
Click to expand...
Click to collapse
Yes flash worked but,
Problems I'm facing,
1. Whenever I restart device, It starts in bootloader and then I have to press start.
2. Because of the above issue, System Updates are are not being installed.(14-4 build is installing again and again)
3. Wifi and Hotspot is not working.(cannot connect to any WiFi network and others cannot see my hotspot)
Supersteam said:
Hi ,
I am also facing the same problem.Is your phone bricked?
Click to expand...
Click to collapse
Nope. It's working. But facing above issues.
Hi
keyur1131 said:
Nope. It's working. But facing above issues.
Click to expand...
Click to collapse
Try this:
https://forum.xda-developers.com/showpost.php?p=72980135&postcount=55
keyur1131 said:
Yes flash worked but,
Problems I'm facing,
1. Whenever I restart device, It starts in bootloader and then I have to press start.
2. Because of the above issue, System Updates are are not being installed.(14-4 build is installing again and again)
3. Wifi and Hotspot is not working.(cannot connect to any WiFi network and others cannot see my hotspot)
Click to expand...
Click to collapse
For 1) you could try:
Boot your device into the bootloader.
Connect your device to your computer
In the adb terminal, type 'fastboot oem fb_mode_clear' without the quotes. This should clear the booting to fastboot.
Reboot and test.
As for a stock June firmware, we'll have to wait for Motorola to build the firmware (and then for a way to 'acquire' it)
echo92 said:
For 1) you could try:
Boot your device into the bootloader.
Connect your device to your computer
In the adb terminal, type 'fastboot oem fb_mode_clear' without the quotes. This should clear the booting to fastboot.
Reboot and test.
As for a stock June firmware, we'll have to wait for Motorola to build the firmware (and then for a way to 'acquire' it)
Click to expand...
Click to collapse
+1 - Thanks, 'fastboot oem fb_mode_clear' worked.
Do you know the reason behind my WiFi and hotspot issue?
Try this command to flash the Stock Rom
keyur1131 said:
+1 - Thanks, 'fastboot oem fb_mode_clear' worked.
Do you know the reason behind my WiFi and hotspot issue?
Click to expand...
Click to collapse
*Download and extract it to your Stock Rom folder.
*Run this bat file
*wait till it finishes
*I hope this will fix the bugs
Supersteam said:
*Download and extract it to your Stock Rom folder.
*Run this bat file
*wait till it finishes
*I hope this will fix the bugs
Click to expand...
Click to collapse
+1 - Worked like a charm. Thank You. :good:
keyur1131 said:
+1 - Worked like a charm. Thank You. :good:
Click to expand...
Click to collapse
You're welcome:victory::victory:

Moto X style XT1575 WiFi don't work

Hello everyone, I'm new to the forum, I'm looking for help with a Moto X style XT1575. I tell you the problem: I bought a Moto X Style used on the internet and it turns out that WiFi does not work, the phone is with MM 6.0.1. Entering Configuration, WiFi, you see a line with movement, as if the phone is still searching for networks with the switch turned off and when you try to activate it, it immediately goes back on by itself. I was reading a bit about this error and it seems quite repeated, not only in this model but also in other Motorola. I saw cases in which besides the WiFi also does not work the Bluetooth, in my case the problem is only in the Wifi. The phone is not rooted or anything, it is factory and reset, I am not sure if it is free but apparently yes, because I accepted sims from two different companies.
Could you help me solve this? From already thank you very much
(I'm using the Google translator, sorry if something I say is not understood)
NamelessGhoulx said:
Hello everyone, I'm new to the forum, I'm looking for help with a Moto X style XT1575. I tell you the problem: I bought a Moto X Style used on the internet and it turns out that WiFi does not work, the phone is with MM 6.0.1. Entering Configuration, WiFi, you see a line with movement, as if the phone is still searching for networks with the switch turned off and when you try to activate it, it immediately goes back on by itself. I was reading a bit about this error and it seems quite repeated, not only in this model but also in other Motorola. I saw cases in which besides the WiFi also does not work the Bluetooth, in my case the problem is only in the Wifi. The phone is not rooted or anything, it is factory and reset, I am not sure if it is free but apparently yes, because I accepted sims from two different companies.
Could you help me solve this? From already thank you very much
(I'm using the Google translator, sorry if something I say is not understood)
Click to expand...
Click to collapse
Is the bootloader unlocked?
No, I think it was officially updated to MM and was left with this problem.
NamelessGhoulx said:
No, I think it was officially updated to MM and was left with this problem.
Click to expand...
Click to collapse
If the bootloader is locked the solution i can think of is to flash the latest firmware (if available).
If there any hardware fault then flashing firmware won't fix this.
Reflash MM? Would that fix the WiFi? I have read cases where the official update itself generates the problem, and they flash the modem and it works, without having to reload the whole system. I do not really know what to do
NamelessGhoulx said:
Reflash MM? Would that fix the WiFi? I have read cases where the official update itself generates the problem, and they flash the modem and it works, without having to reload the whole system. I do not really know what to do
Click to expand...
Click to collapse
Go here
https://forum.xda-developers.com/moto-x-style/general/xt1575-stock-mphs24-49-18-16-files-t3641863
And flash non-hlos.bin and fsg.bin (at your own risk)
This may fix it.
And don't forget to see if the build version matches.
It looks like the versions match. To do this I have to unlock the bootloader and root the phone, is that correct? I'm a rookie, you'll see
NamelessGhoulx said:
It looks like the versions match. To do this I have to unlock the bootloader and root the phone, is that correct? I'm a rookie, you'll see
Click to expand...
Click to collapse
Those are stock images so i don't think you need to unlock bootloader. Just flash via fastboot.
Only flash non-hlos.bin and fsg and also Bluetooth if Bluetooth isn't working.
You can flash via fastboot?
In that post says it's for Pure and my phone is Style. I know they are the same but that clarification made me doubt.
I have not tried because I do not understand how to do it, I see many posts about this and I do not know where to start
NamelessGhoulx said:
In that post says it's for Pure and my phone is Style. I know they are the same but that clarification made me doubt.
I have not tried because I do not understand how to do it, I see many posts about this and I do not know where to start
Click to expand...
Click to collapse
Read carefully the first and second line of the screenshot you have given. It show moto x pure edition.
Update to Nougat would solve this or would it be better to try to flash only those files as it is now in MM?
I could only update using my operator's internet
NamelessGhoulx said:
Update to Nougat would solve this or would it be better to try to flash only those files as it is now in MM?
I could only update using my operator's internet
Click to expand...
Click to collapse
You can't update using mobile data you have to use wifi.
Marshmallow doesn't allow updates via mobile data.
But u can use other mobile and creat wifi hotspot to update.
U can try updating. But in cause some thing break you may have to unlock your bootloader.
And is nougut available for xt1575?
Yes, Nougat is now available for some regions. How can i create a hotspot if te phone does not have WiFi? Can not connect to any network
NamelessGhoulx said:
Yes, Nougat is now available for some regions. How can i create a hotspot if te phone does not have WiFi? Can not connect to any network
Click to expand...
Click to collapse
Oh,right forgot about that.
You can use nougut update zip for xt1575 (if available i couldn't find any)
Or flash is the last option.(i don't know any other fix).
Do you have adb and fastboot in your pc?
No. I'm totally new, I do not understand practically anything
NamelessGhoulx said:
No. I'm totally new, I do not understand practically anything
Click to expand...
Click to collapse
Alright, you are going to want to download minimal fastboot and adb drivers for PC (assuming you are on windows?) https://forum.xda-developers.com/showthread.php?t=2317790&page=70 You do not need an unlocked bootloader or need to be rooted to be able to flash stock. @yk1999 provided the correct file, and so just Google how to flash the commands @yk1999 said. Or follow this guide of how to relock bootloader.
https://forum.xda-developers.com/mo...rn-to-stock-relock-bootloader-t3489110/page33
Edit : the commands are fastboot flash...and then the file names that @yk1999 posted. This should be enough. Download the file I linked you for fastboot and adb, turn on us debugging in settings, and then flash away!
NamelessGhoulx said:
No. I'm totally new, I do not understand practically anything
Click to expand...
Click to collapse
Install adb
Goto bootloader
Connect your usb cable to pc
Press enter after writing each line
fastboot flash modem non-hlos.bin(path to non-hlos.bin)
fastboot flash fsg fsg(path to fsg)
fastboot erase modemst1
fastboot erase modemst2
fastboot erase cache
fastboot reboot
Thanks to both of you. I do not need the drivers of the phone?
NamelessGhoulx said:
Thanks to both of you. I do not need the drivers of the phone?
Click to expand...
Click to collapse
Drivers are included with adb but you can install Motorola device manager it will also install drivers. Search it on Google.
Many thanks to both, I could solve it. They really saved me, I do not know how to thank them

Service Disabled

So after a while now and a lot of struggle trying to root my h910 I managed it a few weeks back, but I have service disabled and I've tried flashing different roms on the device with no success at gaining service. Can anyone help me out here?
CaseyS said:
So after a while now and a lot of struggle trying to root my h910 I managed it a few weeks back, but I have service disabled and I've tried flashing different roms on the device with no success at gaining service. Can anyone help me out here?
Click to expand...
Click to collapse
I think you may need to flash your radios backups that you saved in step one
modem0 and modem1
You can flash them with fastboot if I remember correctly
Sent from my LG-H910 using Tapatalk
clsA said:
I think you may need to flash your radios backups that you saved in step one
modem0 and modem1
You can flash them with fastboot if I remember correctly
Click to expand...
Click to collapse
Where are they located?
CaseyS said:
Where are they located?
Click to expand...
Click to collapse
in my backup they are listed as
modem_COM3
modemst1_COM3
modemst2_COM3
@runningnak3d
Hopefully you backed up your phone like the root procedure said
If you have modemst1 and st2 -- flash those. You can flash them from fastboot:
fastboot flash modemst1 modemst1.img
fastboot flash modemst2 modemst2.img
Click to expand...
Click to collapse
Pleaze i need your help
My v20 h990 ds shows no service i cant make call or connect to intrrnet
I tried every thing such as hard reset, different roms, different sims but the no service is here
The phone read the sim card but it says radio off and not roming
When i try to make call it ask me to turn off airplane mode which already off.
I even rooted the phone, flash modem... but no hope.
Im stuck heeeeeelp
Lg v20 services disabled
Hello guys, i have the same problem after hard resetting and bypassing google verifcation, did you find a solution for your problem
I have the same problem with H910. I am yet to root the phone. Phone is unlocked but it keeps saying service disabled. Only wifi works.

Categories

Resources