Database Users

Cm11 For Tegra Note 7

Firstly i apolozise everyone for the delay :crying:
sorry
DISCLAIMER
Code:
Quote:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Note : The rom is beaan uploaded into different cloud storages , so please be patient the rom will be posted.
-This rom is for tegra note 7 and mightwork for hp slate extreme 7
-Tested On Xolo PLay Tegra Note 7
-This is an Unofficial Build.
Important
Do NOT expect daily builds. I'll build when I'm free.
Do NOT ask for support in this thread.
Do NOT use this unofficial build and ask for support at the official threads.
Do NOT be rude.
Respect all users
If u see a NOOB question and u don't feel like replying, DON'T, just ignore that post. If u do reply, good for u.....and be nice in your reply
Downloads :
http://d-h.st/pFbl :good:
Get Them Here
Installation
Download the zip
Download Gapps
WIPE DATA/FACTORY RESET
Install the zip from recovery
Install gapps
Reboot
Post #2
Changelogs , Screenshots , Bug listings , user reviews
Hit on the Thanks Button if helped!
Rom Version : 4.4.4
Kernel Version : 3.x.x
Required Device Configs : Bootloader Unlocked , CWM/TWRP installed

Screenshot & Changelog
Please upload screenshot and changelog...

Doesn't work
I tried to flash it but gives error as follows
Error executing updater binary in zip '/emmc/cm-11-20150201-UNOFFICIAL-tegratab.zip'
I use XOLO TN7

Thread closed. No kernel source code.

ROM 5.1.1_r9 sprout OctOS MT6582 EVERCOSS A7V <plus>

Hello guys had long I do not share cyanogen rom base here I'll share one that may not be familiar rom among device qualcome​
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Click to expand...
Click to collapse
Team OctOs presents Oct-L.
We maintain a current release record and change-log on our website: http://www.teamoctos.com
- Please Do Not Mirror our files without talking to us. We can do that ourselves should we desire to. -​
Frequently Asked Questions
Q: Is this Android 5 (Lollipop)?
A: Yes, this is Android 5.1.1
Q: What code is Oct-L based on?
A: Starting with Oct-L, we've rebased OctOs on the CyanogenMod 12 code.
Q: What happened to AOSP?
A: All Android code is based on the Android Open Source Project (AOSP). Under previous releases, we tried very hard to limit the number of "Not from Google directly" repositories that we used. Unfortunately, issues with devices, the need for Code Aurora Foundation (CAF) repositories for Qualcomm devices, and compatibility issues meant fighting code more often than not. We decided that since the code-base for many repositories were the same across most ROMs, picking a starting point to build the user experience on outweighed the desire to craft code from scratch, or fix broken code to make it work with other changes we already had.
Q: Why isn't there XXXXXXX feature.
A: Shoot us a Suggestion if you want to see something added. While we are not going to promise to implement, we will always look into it
WORKING:good:
RIL (Calls, Dual SIM, Data only SIM1)
Wifi
GPS/A-GPS
Sound
Camera (Only Photos)
Bluetooth
Sensors
1080p Video Playback
Notification Led
Fix Apps 3rd party instlled drwer reeboot
KNOW BUGS
Sound Recorder Can not access to microphone (Set format to "WAV")
USSD (Is only working for some carriers)
Please don't spam.
Bugs can't be reported in thread posts.
For bug reporting go to "Bug Reports" and don't report same bug.
One time is enought​
Basic Instructions:
Download ROM .zip file and MD5 file, and grab your favourite Android 5 based GApps package
Reboot to Recovery (Note: Use Reboot to Recovery from Power Menu, Hardware-based boot to recovery, or adb reboot recovery - ROM
use Philz recovery
Clean new OS installed
Flash ROM and GApps .ZIP files
Reboot
LINK ROM
https://drive.google.com/open?id=0BzqtrJ97wb8uYlJMQmtKVW1BZGc
ROOT
http://www.datafilehost.com/d/47551904
GAPPS
https://www.androidfilehost.com/?w=files&flid=31528
PLEASE NOT TO LEAVE IF YOU WANT CRDITS ported to ANOTHER DEVICE​:good:
XDA:DevDB Information
ROM 5.1.1_r9 sprout OctOS MT6582 , ROM for all devices (see above for details)
Contributors
ricky_adhitya,
Equinox Team Mediatek ujwal.p, moonrotation
Source Code: http://www.github.com/Team-OctOs
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: cyanogenMOD
Version Information
Status: Beta
Created 2015-09-09
Last Updated 2015-09-09

Is this having emulated storage??
I want to port for mt6592 can i port?
How can i change emulated storage? Imean have made changes in ramdisk for previous verison of lolipop i.e cm12.1 v4 but do u have any idea about recompiling framework-res.apk? Am getting error in recompiling

Hotspot bug?????
U did not mention any hotspot bug in the thread! Is it fixed now?
---------- Post added at 02:41 PM ---------- Previous post was at 02:40 PM ----------
ashudb70 said:
Is this having emulated storage??
I want to port for mt6592 can i port?
How can i change emulated storage? Imean have made changes in ramdisk for previous verison of lolipop i.e cm12.1 v4 but do u have any idea about recompiling framework-res.apk? Am getting error in recompiling
Click to expand...
Click to collapse
Decompile using ADVANCED APK TOOL! And the open framework-res-apk of port ROM using winrar. And replace using drag and drop method! Works 100% . .Easy. Press thanks if i helped!

Im no use beta4 but beta3

I didnt get u ! Can u be more clear?
Sent from my SM-G360H using XDA Free mobile app

I made changes in fstab replaced lines with beta3 v also in init.mt6592.rc also then changed the storage list in framework to remove emulated storage the rom on booting gets stucked at starting apps please help

mj-anand said:
U did not mention any hotspot bug in the thread! Is it fixed now?
---------- Post added at 02:41 PM ---------- Previous post was at 02:40 PM ----------
Decompile using ADVANCED APK TOOL! And the open framework-res-apk of port ROM using winrar. And replace using drag and drop method! Works 100% . .Easy. Press thanks if i helped!
Click to expand...
Click to collapse
hey bro can u tell me how to solve this bug emulated storage what i have to replace and edit in boot img and frameworkres.apk

Hi..Can you please check the supersu link?Also,can this rom be ported to mtk 6582 running on lollipop 5.0.1?Thanks

Sensei [Enjoy the ZenExperience][UberTC][Kernel]

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
What Is Sensei?​
Sensei is a kernel for the Mi4i (ferrari) ported to the Oneplus3 that is derived from the original sources. Built with UberTC to ensure the best performance and stability with a highly optimized system. Cherry-picked features & fixes from AOSP, CM and other repos to provide useful and well-tested features that make your phone better. It does not have useless kernel patches or make dangerous or experimental changes to your phone that cause weird or inexplicable problems.
Features​
Nothing special for now.
Compability​
Sensei is compatible with any rom derived from the CyanogenMod source (CM12.1, CM13, Resurrection Remix) & Stock Rom
DONATIONS​
Sensei is built on open-source software which doesn't allow me to charge it for anything. If you like the kernel and want to donate, here's my paypal email "[email protected]"
Where to download?
Downloads are in the changelog on the 2nd post​
How to install?
Download the kernel
Move it to your phone if downloaded from PC
Reboot into recovery
Locate the kernel and install. You don't have to wipe cache/dalvik.
XDA:DevDB Information
Sensei for Oneplus3, Kernel for the OnePlus 3
Contributors
haikalizz
Source Code: https://gitlab.com/webhaikal/SenseiOneplus3
Kernel Special Features:
Version Information
Status: Testing
Created 2016-06-15
Last Updated 2016-06-15

Changelog & Downloads
Sensei 1.0-dev (15/06/2016)
Initial Release
Download: https://www.androidfilehost.com/?fid=24572369242686502
MD5: 5be48348e7d53dfc89373e56a3f8ad56
Sensei 1.1-dev (18/06/2016)
Added frandom
Toggleable software crc for faster performance
New optimizations into the Makefile
Changeable throttle temperature
Download: https://www.androidfilehost.com/?fid=24572369242686696
MD5: a37c5ff9fc93a0268cfa1850fc50b3d6

Reserved

Is "warranty now void" since OnePlus actively encourage development of the phone???

white43 said:
Is "warranty now void" since OnePlus actively encourage development of the phone???
Click to expand...
Click to collapse
Good point
so this is tested on?

i have been using sensei on my Mi 4i and i am glad to see one for my brand new oneplus 3, thanks dev

wont install in twrp, says its not for the oneplus3.

#Ferrariplz Log

Does this force encryption?

fix-this! said:
wont install in twrp, says its not for the oneplus3.
Click to expand...
Click to collapse
I forgot, the updater script is from ferrari. I added a check in it, forgot to change. You can remove it manually or you could wait for the next update tonight...

Here's the update: https://www.androidfilehost.com/?fid=24572369242686696
Plus if anybody can get me the original boot.img, please do. I wanted to keep a backup of it, don't have the device yet to take it from.

haikalizz said:
Here's the update: https://www.androidfilehost.com/?fid=24572369242686696
Plus if anybody can get me the original boot.img, please do. I wanted to keep a backup of it, don't have the device yet to take it from.
Click to expand...
Click to collapse
Still wont flash in twrp. Seems the update script is wrong and has to be specific for the device. Says it needs to be named OnePlus3 not oneplus3.

haikalizz said:
Here's the update: https://www.androidfilehost.com/?fid=24572369242686696
Plus if anybody can get me the original boot.img, please do. I wanted to keep a backup of it, don't have the device yet to take it from.
Click to expand...
Click to collapse
Stock boot.img From 3.1.3

Stock 3.1.2 boot.img here : http://forum.xda-developers.com/oneplus-3/help/boot-img-stock-rom-required-t3400130

i changed the update script and it flashed finally but the phone doesn't boot at all. had to go back to the stock kernel.

Does the OP even have this phone to test the kernel?

fix-this! said:
Does the OP even have this phone to test the kernel?
Click to expand...
Click to collapse
Still haven't received it... Need to wait 2-3 weeks because I bought it from outside of the country and the shipping takes time...

haikalizz said:
Still haven't received it... Need to wait 2-3 weeks because I bought it from outside of the country and the shipping takes time...
Click to expand...
Click to collapse
Well ill test for you if you keep building.

https://www.androidfilehost.com/?fid=24591023225176581 Let's try this one out... Thanks to @DespairFactor for helping out with stuff...

haikalizz said:
https://www.androidfilehost.com/?fid=24591023225176581 Let's try this one out... Thanks to @DespairFactor for helping out with stuff...
Click to expand...
Click to collapse
Build flashed but reboots to bootloader when you reboot the device

[ROM][UNOFFICIAL] CM 13 [6.0.1] Hexxa Atenea [MT6572] and Clones [SMARTWATCH]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Hi Guys!
!!!! This is the first smartwatch with an Android 6 !!!! (not wear)
Here you will find my CyanogenMod 13 (Android 6) Rom for the Hexxa Atenea (Mediatek MT6572 SoC), and clones.
Please be sure to read (and re-read) carefully, to avoid unnecessary questions.
This is an Unofficial Source Build, so it will NOT be supported by the CyanogenMod Team
THIS IS ONLY FOR EXPERIENCED USERS THAT KNOW HOW TO FLASH A MEDIATEK DEVICE USING FLASH TOOLS. I WILL NOT ANSWER ANY QUESTION REGARDING HOW TO FLASH, HOW TO INSTALL DRIVERS, OR ANYTHING NOT RELATED WITH INTERNAL ROM USAGE!!! I prefer spend my few spare time fixing things that answering things that are already answered in XDA or Google.
This rom is based in Hexxa Atenea official ROM, but with some modifications:
Data size is now 2.4Gb and sdcard is emulated inside data partition. Now you have +2Gb to install apps. But if you do wipe, the "sdcard" is deleted too, so be careful of what do you store there.
The Launcher is the ClockSkin (thanks @riktop) app modified with an app list, so it's a fully working skin manager with an app launcher.
Thanks also to @blerfont because it takes the clockskin app and convert it to a full launcher for round watches.
It also work without any issues on the clones (mt6572):
- No1 D5
- Other clones
CyanogenMod 13 Status:
Working:
- All
Not Working / Needs Improvements :
-Nothing I found.
Flash Instructions:
Backup, Backup, Backup ... Use MtkDroidTools for backup (http://forum.xda-developers.com/showthread.php?t=2730031)
Flash the image with Flashtools (http://forum.xda-developers.com/showthread.php?t=2730031)
To enter flashtool mode, shutdown the device before put it in the base. Search Internet for more info.
To flash select Firmware Upgrade or your data partition will not change. If you finish and data has +- 630Mb, reflash using Firmware Upgrade.
Recovery instructions:
Use your stock flastool image to restore the smartwatch.
This rom doesn't have Google Apps. If you want to add them, search for Open Gapps and install pico version.
Mirror download link: https://mega.nz/#!8dRRiThQ!cEATH8peK2VYvdn0bWtcDaOYo1iT3f1dtp2BPRSq2yw
GPL Compliance:
Device: https://github.com/corvusmod/device_hexxa_atenea
Vendor : https://github.com/corvusmod/vendor_hexxa_atenea
Credits:
CyanogenMod Team
MediatekAndroidDevelopers (fire855, ferhung and the rest of the team)
Moyster
BlueFlame4
People at CM for Mediatek thread (http://forum.xda-developers.com/showthread.php?t=2274332)
XDA:DevDB Information
[ROM][UNOFFICIAL] CM 13 [6.0.1] Hexxa Atenea [MT6572] and Clones [SMARTWATCH], ROM for the Smart Watches
Contributors
corvus, blerfont
ROM OS Version: 6.0.x Marshmallow
Based On: CM13
Version Information
Status: Stable
Created 2016-10-27
Last Updated 2016-10-27

Reserved
Some images of the watch: https://photos.google.com/share/AF1QipPoATO0k-sE9VJpF8RQbAtramTGXkc6ftOyt14cVlHt6rPPk2uVjnPeTgTrPB2I5A?key=ZFpqbEhLd3Boa1dOYVBNOVpWMGFybjE4YTRrOWdB
And test the new clockskin launcher with gestures:
Swipe right = Weather app
Swipe left = Health app
Swipe up = Control Bar

Thanks.
The CM 13 for the No.1 D5+ (w612), MT6580, would be really great.

seppen said:
Thanks.
The CM 13 for the No.1 D5+ (w612), MT6580, would be really great.
Click to expand...
Click to collapse
He doesn't have one of those watches so it is unlikely
@corvus great effort mate. Didn't take you long to move up from 5.1
I'll dig out my old d5 again and give it a test run.
Thanks again mate

pablo11 said:
He doesn't have one of those watches so it is unlikely
@corvus great effort mate. Didn't take you long to move up from 5.1
I'll dig out my old d5 again and give it a test run.
Thanks again mate
Click to expand...
Click to collapse
@corvus
If you need some help.
I would test a CM 13 for w612, MT6580 on my D5+.

Woow!! very nice work!! but how go back in menu?? Thank corvus!

Steve Giordano said:
Woow!! very nice work!! but how go back in menu?? Thank corvus!
Click to expand...
Click to collapse
You can use power button:
1 short press = sleep
1 long press = power menu
2 short presses = back button
3 short presses = menu button

Hi, watch helper work?? This firmware with notification bluetooth would be the best!
ps: in recovery not found sdcard partition.

corvus said:
You can use power button:
1 short press = sleep
1 long press = power menu
2 short presses = back button
3 short presses = menu button
Click to expand...
Click to collapse
Hey Corvus - and others - Just a warning here.
My hardware button has broken after using it so much for these menu operations.
Luckily I have spare watches but for some this could be a real issue.
A way to go "back" is really really important here.....
---------- Post added at 09:24 PM ---------- Previous post was at 09:21 PM ----------
Steve Giordano said:
Hi, watch helper work?? This firmware with notification bluetooth would be the best!
ps: in recovery not found sdcard partition.
Click to expand...
Click to collapse
Steve - use M2D - Pascal has developed it especially for these watches now.
It works really well. See here: http://roundandroidwatches.proboards.com/thread/182/apps-sender-bluetooth-manager-receiver
PS - SD card is now the data partition as he said in the OP.... So won't show in recovery

pablo11 said:
Hey Corvus - and others - Just a warning here.
My hardware button has broken after using it so much for these menu operations.
Luckily I have spare watches but for some this could be a real issue.
A way to go "back" is really really important here.....
---------- Post added at 09:24 PM ---------- Previous post was at 09:21 PM ----------
Steve - use M2D - Pascal has developed it especially for these watches now.
It works really well. See here: http://roundandroidwatches.proboards.com/thread/182/apps-sender-bluetooth-manager-receiver
PS - SD card is now the data partition as he said in the OP.... So won't show in recovery
Click to expand...
Click to collapse
Hi, How configure M2d?!

Go check out the link I posted and ask for help if needed ?
Sent from my HTC 2PS6200 using Tapatalk

pablo11 said:
Go check out the link I posted and ask for help if needed
Sent from my HTC 2PS6200 using Tapatalk
Click to expand...
Click to collapse
Woow thank pablo11 work very well!! Corvus can you add M2d applications on stock app? and Swipe right open M2d receiver ?? It would be wonderful!!

I'm thinking about some ways to add a soft back button or some kind of gesture that works system-wide. Will be in next version. Also seems that is some kind of problem with mic.
We are trying to add notifications to the launcher, but I don't know if it will be ready for next version.
I try to add M2D to the rom, and talked with the developer, but it launch at boot and is pretty intrusive, so I choose not to add it to the rom. Install it at hand. Also I can't add the notifications, because if some users don't use M2D what will happen with this swipe move?.

corvus said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Hi Guys!
!!!! This is the first smartwatch with an Android 6 !!!! (not wear)
Here you will find my CyanogenMod 13 (Android 6) Rom for the Hexxa Atenea (Mediatek MT6572 SoC), and clones.
Please be sure to read (and re-read) carefully, to avoid unnecessary questions.
This is an Unofficial Source Build, so it will NOT be supported by the CyanogenMod Team
THIS IS ONLY FOR EXPERIENCED USERS THAT KNOW HOW TO FLASH A MEDIATEK DEVICE USING FLASH TOOLS. I WILL NOT ANSWER ANY QUESTION REGARDING HOW TO FLASH, HOW TO INSTALL DRIVERS, OR ANYTHING NOT RELATED WITH INTERNAL ROM USAGE!!! I prefer spend my few spare time fixing things that answering things that are already answered in XDA or Google.
This rom is based in Hexxa Atenea official ROM, but with some modifications:
Data size is now 2.4Gb and sdcard is emulated inside data partition. Now you have +2Gb to install apps. But if you do wipe, the "sdcard" is deleted too, so be careful of what do you store there.
The Launcher is the ClockSkin (thanks @riktop) app modified with an app list, so it's a fully working skin manager with an app launcher.
Thanks also to @blerfont because it takes the clockskin app and convert it to a full launcher for round watches.
It also work without any issues on the clones (mt6572):
- No1 D5
- Other clones
CyanogenMod 13 Status:
Working:
- All
Not Working / Needs Improvements :
-Nothing I found.
Flash Instructions:
Backup, Backup, Backup ... Use MtkDroidTools for backup (http://forum.xda-developers.com/showthread.php?t=2730031)
Flash the image with Flashtools (http://forum.xda-developers.com/showthread.php?t=2730031)
To enter flashtool mode, shutdown the device before put it in the base. Search Internet for more info.
To flash select Firmware Upgrade or your data partition will not change. If you finish and data has +- 630Mb, reflash using Firmware Upgrade.
Recovery instructions:
Use your stock flastool image to restore the smartwatch.
This rom doesn't have Google Apps. If you want to add them, search for Open Gapps and install pico version.
Mirror download link: https://mega.nz/#!8dRRiThQ!cEATH8peK2VYvdn0bWtcDaOYo1iT3f1dtp2BPRSq2yw
GPL Compliance:
Device: https://github.com/corvusmod/device_hexxa_atenea
Vendor : https://github.com/corvusmod/vendor_hexxa_atenea
Credits:
CyanogenMod Team
MediatekAndroidDevelopers (fire855, ferhung and the rest of the team)
Moyster
BlueFlame4
People at CM for Mediatek thread (http://forum.xda-developers.com/showthread.php?t=2274332)
XDA:DevDB Information
[ROM][UNOFFICIAL] CM 13 [6.0.1] Hexxa Atenea [MT6572] and Clones [SMARTWATCH], ROM for the Smart Watches
Contributors
corvus, blerfont
ROM OS Version: 6.0.x Marshmallow
Based On: CM13
Version Information
Status: Stable
Created 2016-10-27
Last Updated 2016-10-27
Click to expand...
Click to collapse
does this work for the k8/k18 round watch? it is MTK6572 too.
tried flashing your firmware but bricked it ... you think its the wrong preloader.bin only? i'm back on stock firmware now but would love to have this.
thanks

roufster said:
does this work for the k8/k18 round watch? it is MTK6572 too.
tried flashing your firmware but bricked it ... you think its the wrong preloader.bin only? i'm back on stock firmware now but would love to have this.
thanks
Click to expand...
Click to collapse
Try taking MBR, EBR1, system, recovery, boot and userdata files from my image and copy them to the stock flashtools image for k18. I haven't tested it, so I can't say that this will work. And more important, I don't know if this will brick your device, so do it at your own risk.

corvus said:
Try taking MBR, EBR1, system, recovery, boot and userdata files from my image and copy them to the stock flashtools image for k18. I haven't tested it, so I can't say that this will work. And more important, I don't know if this will brick your device, so do it at your own risk.
Click to expand...
Click to collapse
thanks. I tried it, didn't work. I can see the world logo for second on startup and then nothing ... its step-up because if I flash your full rom, I cant even see the world logo.

Wow, thank you!

Hi,
is there a wake up function in your rom when i raise up my wrist???
thank you

dax32 said:
Hi,
is there a wake up function in your rom when i raise up my wrist???
thank you
Click to expand...
Click to collapse
No by now and I don't know if it will ever be, because it's a battery eater.

Could you please implement LMT or something like that instead of pressing the hardware button for back and menu? Of cause everyone can install it after they install the rom. But I think it will work better if it is integrated
P.S. have seen now on proboard you made it already some days ago

Unofficial LineageOS 14.1 for ZS570KL

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Instructions
Unlock bootloader
Upgrade to Android 7.0 stock ROM
Flash TWRP
Wipe data
Install ROM
Profit !
What's working ?
Screen
Touch
Hardware keys (power and volume)
Virtual keys (back / home / task)
Wifi
Camera / Camcorder / flashlight
All sensors should be working (at least app can read value)
Fingerprint
GPS
headset
NFC
Bluetooth
SIM
What's broken ?
speaker
FM
WiFi Hotspot
Download Links
Main folder
https://mega.nz/#F!k4dnDRqR!LIRfGACYK-81inqvUMNjEA
I'm not sure if I have time for future development and if anyone is interested in taking over this project, please fork (or pull request) and go ahead
XDA:DevDB Information
Unofficial LineageOS 14.1, ROM for the Asus ZenFone 3 Deluxe
Contributors
shakalaca
Source Code: https://github.com/shakalaca/android_device_asus_zs570kl/tree/cm-14.1
https://github.com/shakalaca/android_kernel_asus_zs570kl
ROM OS Version: 7.x Nougat
Based On: LineageOS
Version Information
Status: Alpha
Created 2017-04-14
Last Updated 2017-04-14

Reserved

Unfortunately it does not boot for me. Blank black screen after white Asus logo. Had to reflash stock rom as it caused soft-brick. I'm using s821/256gb so it could just be my model.
Great to see development started though and looking forward to further progress!

Huffy1 said:
Unfortunately it does not boot for me. Blank black screen after white Asus logo. Had to reflash stock rom as it caused soft-brick. I'm using s821/256gb so it could just be my model.
Great to see development started though and looking forward to further progress!
Click to expand...
Click to collapse
Flash stock recovery and flash stock ROM.

Does it work for you?

I will try it in a few hours later.
Stock on Lineage [email protected]@
Don't know how to resolve it.

Any feedback yet on this? Interested on progress.

Hii. ROM is not working, it stays on bootanimation screen.?
---------- Post added at 11:26 AM ---------- Previous post was at 11:22 AM ----------
I follow the instructions but do not open?

erbil51 said:
Hii. ROM is not working, it stays on bootanimation screen.?
---------- Post added at 11:26 AM ---------- Previous post was at 11:22 AM ----------
I follow the instructions but do not open
Click to expand...
Click to collapse
Didn't work anymore, we have to say that we(with shakalaca and some people in Asus forum)didn't know why it didn't work on our phone,but shakalaca ’s phone do.So may need more people with building ROM or might no work......

:crying:

Data image encrypted, do not wipe data, rom not loaded, please help me !

erbil51 said:
Data image encrypted, do not wipe data, rom not loaded, please help me !
Click to expand...
Click to collapse
What did you do?
This Rom doesn't work right now.
Please recovery stock Rom.
Still have question please post screenshot!

samson1357924 said:
What did you do?
This Rom doesn't work right now.
Please recovery stock Rom.
Still have question please post screenshot!
Click to expand...
Click to collapse
Tank you :crying:

Will this rom be updated ? :/

BahaStriker said:
Will this rom be updated ? :/
Click to expand...
Click to collapse
Might not,but may be rebuilt after builder buy a new phone or somebody can help to debug.(unknown reason which make it didn't work.)

OK finally solved the bootloop issue by commenting out the bluetooth partition entry in fstab.qcom. Somehow it only works on my phone and failed on others Please kindly try 20170527, and for S821 I have to build another rom and replace some firmware under /system/etc/firmware..

shakalaca said:
OK finally solved the bootloop issue by commenting out the bluetooth partition entry in fstab.qcom. Somehow it only works on my phone and failed on others Please kindly try 20170527, and for S821 I have to build another rom and replace some firmware under /system/etc/firmware..
Click to expand...
Click to collapse
Wow!!!Thank you for your hard work!!!

anyone brave enough to try it out yet? my phone is my daily driver I can't risk bricking it !

techninja311 said:
anyone brave enough to try it out yet? my phone is my daily driver I can't risk bricking it !
Click to expand...
Click to collapse
It's work.
But I got incorrect pattern after I recovery my backup of stock rom! Which make me unable to access the stock ROM.
maybe try to disable the pattern before flash.

shakalaca, if I should end up with LineageOS on my S821 thanks to you, I promise I'll somehow send you $50.
I was not prepared for the possibility to not have it on this beautiful phone
So please, boom shakalca!! (Any chance you got your nick from SNES NBA Jam?)