Sensei [Enjoy the ZenExperience][UberTC][Kernel] - OnePlus 3 ROMs, Kernels, Recoveries, & Other Devel

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
What Is Sensei?​
Sensei is a kernel for the Mi4i (ferrari) ported to the Oneplus3 that is derived from the original sources. Built with UberTC to ensure the best performance and stability with a highly optimized system. Cherry-picked features & fixes from AOSP, CM and other repos to provide useful and well-tested features that make your phone better. It does not have useless kernel patches or make dangerous or experimental changes to your phone that cause weird or inexplicable problems.
Features​
Nothing special for now.
Compability​
Sensei is compatible with any rom derived from the CyanogenMod source (CM12.1, CM13, Resurrection Remix) & Stock Rom
DONATIONS​
Sensei is built on open-source software which doesn't allow me to charge it for anything. If you like the kernel and want to donate, here's my paypal email "[email protected]"
Where to download?
Downloads are in the changelog on the 2nd post​
How to install?
Download the kernel
Move it to your phone if downloaded from PC
Reboot into recovery
Locate the kernel and install. You don't have to wipe cache/dalvik.
XDA:DevDB Information
Sensei for Oneplus3, Kernel for the OnePlus 3
Contributors
haikalizz
Source Code: https://gitlab.com/webhaikal/SenseiOneplus3
Kernel Special Features:
Version Information
Status: Testing
Created 2016-06-15
Last Updated 2016-06-15

Changelog & Downloads
Sensei 1.0-dev (15/06/2016)
Initial Release
Download: https://www.androidfilehost.com/?fid=24572369242686502
MD5: 5be48348e7d53dfc89373e56a3f8ad56
Sensei 1.1-dev (18/06/2016)
Added frandom
Toggleable software crc for faster performance
New optimizations into the Makefile
Changeable throttle temperature
Download: https://www.androidfilehost.com/?fid=24572369242686696
MD5: a37c5ff9fc93a0268cfa1850fc50b3d6

Reserved

Is "warranty now void" since OnePlus actively encourage development of the phone???

white43 said:
Is "warranty now void" since OnePlus actively encourage development of the phone???
Click to expand...
Click to collapse
Good point
so this is tested on?

i have been using sensei on my Mi 4i and i am glad to see one for my brand new oneplus 3, thanks dev

wont install in twrp, says its not for the oneplus3.

#Ferrariplz Log

Does this force encryption?

fix-this! said:
wont install in twrp, says its not for the oneplus3.
Click to expand...
Click to collapse
I forgot, the updater script is from ferrari. I added a check in it, forgot to change. You can remove it manually or you could wait for the next update tonight...

Here's the update: https://www.androidfilehost.com/?fid=24572369242686696
Plus if anybody can get me the original boot.img, please do. I wanted to keep a backup of it, don't have the device yet to take it from.

haikalizz said:
Here's the update: https://www.androidfilehost.com/?fid=24572369242686696
Plus if anybody can get me the original boot.img, please do. I wanted to keep a backup of it, don't have the device yet to take it from.
Click to expand...
Click to collapse
Still wont flash in twrp. Seems the update script is wrong and has to be specific for the device. Says it needs to be named OnePlus3 not oneplus3.

haikalizz said:
Here's the update: https://www.androidfilehost.com/?fid=24572369242686696
Plus if anybody can get me the original boot.img, please do. I wanted to keep a backup of it, don't have the device yet to take it from.
Click to expand...
Click to collapse
Stock boot.img From 3.1.3

Stock 3.1.2 boot.img here : http://forum.xda-developers.com/oneplus-3/help/boot-img-stock-rom-required-t3400130

i changed the update script and it flashed finally but the phone doesn't boot at all. had to go back to the stock kernel.

Does the OP even have this phone to test the kernel?

fix-this! said:
Does the OP even have this phone to test the kernel?
Click to expand...
Click to collapse
Still haven't received it... Need to wait 2-3 weeks because I bought it from outside of the country and the shipping takes time...

haikalizz said:
Still haven't received it... Need to wait 2-3 weeks because I bought it from outside of the country and the shipping takes time...
Click to expand...
Click to collapse
Well ill test for you if you keep building.

https://www.androidfilehost.com/?fid=24591023225176581 Let's try this one out... Thanks to @DespairFactor for helping out with stuff...

haikalizz said:
https://www.androidfilehost.com/?fid=24591023225176581 Let's try this one out... Thanks to @DespairFactor for helping out with stuff...
Click to expand...
Click to collapse
Build flashed but reboots to bootloader when you reboot the device

Related

[ROM] [NS4G] CyanogenMod 10 Android v4.1.1 CM Night builds

This is the works of burnsra, kalim, and mostly, the entire CyanogenMod Team. None of this is my original work, I am merely
sharing this so CM10 information can be consolidated in one thread for that specific purpose, instead of the many scattered and mislabeled threads we currently have. Again, this is none of my original work, I am just sharing CM10 for crespo4g with the community.
Links to those who have contributed-
http://forum.xda-developers.com/showthread.php?t=1403247, http://forum.xda-developers.com/showthread.php?t=1399035, http://www.cyanogenmod.com/
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 10 to the Nexus S 4G, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 10?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Night Builds can be found here: http://get.cm/?device=crespo4g
ChangeLog: http://cm10log.appspot.com/?device=crespo4g
REMEMBER TO INSTALL GAPPS ALWAYS AFTER INSTALL AND UPDATED ROM.
For those who want to install faceunlock read this: https://plus.google.com/u/0/111722836277981844223/posts/2LthtkGD8aY
TO MAKE A CLEAN INSTALL. LOOK HERE
REPORT ISSUES ONLY IF:
You made a clean intall
You use the default kernel
You have not installed new framework
You have confirmed the issue is there with default CPU speed
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Runs nice, any chance of a link to Burns' gapps the ones that give up camera options for photo syncing ?
Excellent work.Thank you very much.
Moved to general, if you didn't build it, it doesn't belong in development
This came fast. I never tried CM much, how does it work when switching to a new nightly (or future RC/Final)? Does that work without wiping?
veyka said:
Moved to general, if you didn't build it, it doesn't belong in development
Click to expand...
Click to collapse
But now there are two threads in general about the CM10 nightly builds :/
almizilero said:
This came fast. I never tried CM much, how does it work when switching to a new nightly (or future RC/Final)? Does that work without wiping?
Click to expand...
Click to collapse
This has been around for a month. I usually just wipe cache & dalvic, then flash rom & gapps between updates, unless told to do more, or if I run into major issues.
ehiggins said:
Runs nice, any chance of a link to Burns' gapps the ones that give up camera options for photo syncing ?
Click to expand...
Click to collapse
Check the original thread for this rom.
Sent from my Nexus S 4G using Tapatalk 2
Let me get this straight. The OP made a thread to link us to another thread?
Should we use the new GAPPS, even thought they say they are for 4.2.1?
blu8503 said:
Should we use the new GAPPS, even thought they say they are for 4.2.1?
Click to expand...
Click to collapse
If you want a faulty behaviour, sure.
Sent from my Nexus S using Tapatalk 2
Nice work my friend . . . :good:

[ROM][UNOFFICIAL] CM 13.0 [h901] [TEST BUILDS][07-13-16]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Works:
Data, Wifi, GPS, modded screen hack
Still needs work:
Bluetooth music skips
Camera
Unofficial v10 h901 device tree: https://github.com/aclegg2011/android_device_lge_h901
Unofficial v10 h901 vendor tree: https://github.com/aclegg2011/https://github.com/aclegg2011/proprietary_vendor_lge_h901
Unofficial v10 h901 MM Kernel(caf): https://github.com/Nebula-Mirror/android_kernel_lge_pplus
Download Links
CyanogenMod:
Unofficial Test Build: https://www.androidfilehost.com/?fid=24572369242688627
Google apps addon:
OpenGapps: http://opengapps.org/ ARM64, 6.0, pico
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
For getting a working v10 mm kernel together and asking me to help:
Eliminater74
The base of the device trees I used were based of the g4 repos, thanks to these guys for it:
genesixxbf3
codeworkx
XDA:DevDB Information
[ROM][UNOFFICIAL] CM 13.0 [h901] , ROM for the T-Mobile LG V10
Contributors
aclegg2011
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CM, AOSP
Version Information
Status: Testing
Created 2016-03-28
Last Updated 2016-07-13
Reserved
Thanks for all the testers that helped me get this project this far!
Reserved
Screenshots
SWEET!!
Very good sir!
OMG.... Thanks download now... Woooho... ? ? ?
Thanks for doing what the companies are taking forever to do lol
I finally get my v10 tomorrow. So I'm hoping I can get more bug fixes done soon.
FYI: Remember peepz, This IS TESTING STAGE only......... Camera does not work.. The chances that you can make a decent phone call is very slim..
Bluetooth works. but music skips........
We are working hard on this Project.......... CM13 Kernel is The Stock V10 H901 MM Kernel Merged with Caf/msm8992 ..............
We are keeping the unofficial cm13 kernel As close to stock as possible so that peepz can do what they want with mods................
If you want custom kernel.. Check out my Nebula3e when I release it for the V10.............
But dont expect everything here to work.............................. But it will soon................
Officially hyped. Can't wait for the bugs to be worked out.
Just quick question, screenshots don't show it but what does the second screen look like? Is it enabled/active. This is asked to the current testers. I'm probably going to wait til most of the bugs are ironed out before installing. This phone is my daily driver so I need to make sure it works consistently.
amoot329 said:
Just quick question, screenshots don't show it but what does the second screen look like? Is it enabled/active. This is asked to the current testers. I'm probably going to wait til most of the bugs are ironed out before installing. This phone is my daily driver so I need to make sure it works consistently.
Click to expand...
Click to collapse
I was told it's disabled and you get a full screen. I'm going to try my best to see if I can get it added in. No promises though.
No worries, I know you have the v10 on the way. Fingers crossed, you'll do magic with it. B
Sent from my debloated rooted LG V10 using Tapatalk
Will the hifi DAC work?
frunkisOnA said:
Will the hifi DAC work?
Click to expand...
Click to collapse
The DAC, Capture+, and nearly every other LG/device specific feature are currently not working and will probably not work with CyanogenMod for some time. This is CM, so it's very unlikely we'll be getting any of the camera-specific features from the stock ROM for a while either.
If you value those features, you should stick with a stock-based ROM for the foreseeable future.
soltheman said:
The DAC, Capture+, and nearly every other LG/device specific feature are currently not working and will probably not work with CyanogenMod for some time. This is CM, so it's very unlikely we'll be getting any of the camera-specific features from the stock ROM for a while either.
If you value those features, you should stick with a stock-based ROM for the foreseeable future.
Click to expand...
Click to collapse
OK thank you
soltheman said:
The DAC, Capture+, and nearly every other LG/device specific feature are currently not working and will probably not work with CyanogenMod for some time. This is CM, so it's very unlikely we'll be getting any of the camera-specific features from the stock ROM for a while either.
If you value those features, you should stick with a stock-based ROM for the foreseeable future.
Click to expand...
Click to collapse
You never know. Maybe if the right coders come around and try a little harder amazing things could get done. Not promising nothing, but you just never know.
Nice work. Couldn't test it for a long period cause Google play services force closes constantly. Nice start tho
supergear said:
Nice work. Couldn't test it for a long period cause Google play services force closes constantly. Nice start tho
Click to expand...
Click to collapse
I wanted to wait a little longer till I got more bugs out, but some kiddie rom guy said it was vaporware. So now it's here. Bugs and all.
aclegg2011 said:
I wanted to wait a little longer till I got more bugs out, but some kiddie rom guy said it was vaporware. So now it's here. Bugs and all.
Click to expand...
Click to collapse
Who cares what people think. You know it wasn't vaporware that is all that matters. If kiddie Rom guy thought it was fake he could have made it himself. Anyways good work so far, at least it boots!
---------- Post added at 05:24 AM ---------- Previous post was at 05:21 AM ----------
Don't let Impatient people rush you or make you quit! Just ignore people who expect you to do stuff you do as a hobby. Now if they want to pay you then that is another story

[ROM][Unofficial][6.0][oneplus3]CyanogenMod 13.0 for OnePlus 3

Deprecated, move to http://forum.xda-developers.com/oneplus-3/development/rom-unofficial-cyanogenmod-13-t3399089
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Official CyanogenMod Wiki:http://wiki.cyanogenmod.org/w/Main_Page
Important information:
This thread is for CyanogenMod 13.0 builds for OnePlus 3. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Features:
Now the device is mainly maintained by Grarak, Steve Kondik, Altaf Patel and me
Merged latest f2fs stable branch for linux 3.18.y, F2FS is supprted
Update kernel to linux 3.18.36
Support CDMA
Support call recording
Camera HDR mode works well
SELinux set to enforcing
Enabled cpusets
Known bugs:
No VOOC/DASH support
To be discovered
TODO:
Add kernel level color calibration support
Perf related enhancement
Installation:
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery, my TWRP is highly recommended because it supports both decryption and F2FS: http://forum.xda-developers.com/oneplus-3/development/recovery-twrp-3-0-2-0-touch-recovery-t3402999
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Optional: Install the Google Apps addon package
Reboot
Source code:
https://github.com/cyanogenmod
https://github.com/cyanogenmod/android_device_oneplus_oneplus3
https://github.com/cyanogenmod/android_kernel_oneplus_msm8996
https://github.com/TheMuppets/proprietary_vendor_oneplus
Changelog:
16/6/21:
First release with latest CM source
16/7/3:
Sync latest CM source
Update proprietary blobs
Steve pulled lots of telephony patches from CAF, he says telephony now works fine for him
Miscellaneous bug fixes and tweaks
Download:
https://s.basketbuild.com/devs/dianlujitao/oneplus3/cm13
Credits:
CyanogenMod Team
Code Aurora Forum
OnePlusOSS
ivan19871002 (graphics and camera HDR mode)
Grarak
Steve Kondik
Altaf Patel
Other CyanogenMod developers
XDA:DevDB Information
CyanogenMod, ROM for the OnePlus 3
Contributors
dianlujitao
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 2
Beta Release Date: 2016-07-03
Created 2016-06-21
Last Updated 2016-07-03
been fan of your work on honor 4x and z9 max...good to see you here...
good job! Wonder whether the camera could be as good as the stock one
I get com.andorid.phone FC during setup stage. Cannot complete setup.
--deleted--
Volte is broke FYI.
EggZenBeanz said:
I get com.andorid.phone FC during setup stage. Cannot complete setup.
Click to expand...
Click to collapse
Maybe you have 2 sim cards, right. Remove one and try...
Good job done bro
..keep up
Sent from my TECNO W4 using Tapatalk
EggZenBeanz said:
I get com.andorid.phone FC during setup stage. Cannot complete setup.
Click to expand...
Click to collapse
Had the same problem restarted to twrp re-wiped everything and re-flashed and been smooth sailing ever since.
Are you going to add sRGB mode?
I've an issue with .mp4 files.
All work fine except .mp4 files ... mu OP3 cannot read them, all of them !
Someother with this strange issue ?
No VoLTE. Here's a logcat.
stupid ?, does the fingerprint sensor work with cm13 or just stock?
Bradl79 said:
stupid ?, does the fingerprint sensor work with cm13 or just stock?
Click to expand...
Click to collapse
Works with CM
itsLewin said:
Works with CM
Click to expand...
Click to collapse
thank you, do u know how easy it is to go back to stock OxygenOS from a nandroid backup, do u know if i need to do anything special like reflash firmware or something, since our TWRP does not back those up, thank u
Bradl79 said:
thank you, do u know how easy it is to go back to stock OxygenOS from a nandroid backup, do u know if i need to do anything special like reflash firmware or something, since our TWRP does not back those up, thank u
Click to expand...
Click to collapse
Remember to set your screen unlock to swipe before making the backup as your unock pattern wont be valid after a restore. I had this situation already twice.
Planet X said:
Remember to set your screen unlock to swipe before making the backup as your unock pattern wont be valid after a restore. I had this situation already twice.
Click to expand...
Click to collapse
Yeah I have done that too lol, other than that anything else I need to do
@dianlujitao thanks for your hard work, following it on the cmxlog Mind sharing a new build with the new kernel stuff etc?
matssa said:
@dianlujitao thanks for your hard work, following it on the cmxlog Mind sharing a new build with the new kernel stuff etc?
Click to expand...
Click to collapse
Still WIP in many fields
dianlujitao said:
Still WIP in many fields
Click to expand...
Click to collapse
Yeah I thought so ^^ But since Grarak isn't sharing any new builds (mostly because there is WIP), I though that maybe you could share yours Anyhow, I hope CM13 will sort out official builds sonn

[ROM][7.0.0][UNOFFICIAL][WIP] Cyanogenmod 14.0 - SM-T705

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.0 (Nougat), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial CyanogenMod 14.0 builds for klimtlte (SM-T705). The following will not be supported here:
Custom kernels
Mods
Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Installation
First time flashing CyanogenMod 14.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Make sure you are on the latest modem (Download below)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Install the Google Apps addon package (Optional)
Reboot
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog&hl=en
Downloads
CyanogenMod:
9/15 build
Google Apps:
http://opengapps.org/- thanks to the OpenGapps team!
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Source:
Kernel: https://github.com/CM-Tab-S/android_kernel_samsung_klimtwifi
Device Tree: https://github.com/CM-Tab-S/android_device_samsung_klimtlte
Credits:
@Barracuda77777 (For helping in the past)
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits - the base @Barracuda77777 and @nvertigo67 started of from)
@eousphoros (for his device git)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
@ZakooZ (For his work on N for n1awifi)
Working:
It boots!
Display
Wifi
GPS
Audio
Netflix
Youtube (Only up to 360P)
Not Working/Bugs:
Graphical glitches on rotation
No telephony (Calling, texting, Data)
Fingerprint
Bluetooth
Google Play Movies
Please do not use this as a DD i just pushed it so people can see what the progress was.
You will get a few fc's during the setupwizard just ignore them.
I have not had this tested on the other T705 variants so i can not confirm it works on them.
Great I will test the rom in my t705
I'm using Schischus Android Nougat version where some of the issues you noted are fixed. Why not team up?
Nice to see more android n based roms are coming
Thank u deadman
achmetinternet said:
I'm using Schischus Android Nougat version where some of the issues you noted are fixed. Why not team up?
Click to expand...
Click to collapse
Is this rom you use is for t705 ?
aumast said:
Is this rom you use is for t705 ?
Click to expand...
Click to collapse
Yes.
T700
Any possibility to have a T700 build as well ? I am willing to test if feedback needed.
Thanks
achmetinternet said:
Yes.
Click to expand...
Click to collapse
Please link me to it?
Read the thread first :
http://forum.xda-developers.com/galaxy-tab-s/development/rom-android-7-nougat-t3449078
Nice and thanks... Need it for 805
deadman can this be flashed on the T700? also do you plan on releasing for the T700?
achmetinternet said:
I'm using Schischus Android Nougat version where some of the issues you noted are fixed. Why not team up?
Click to expand...
Click to collapse
Because Schischu literally doesn't share his work
great work thx!
achmetinternet said:
I'm using Schischus Android Nougat version where some of the issues you noted are fixed. Why not team up?
Click to expand...
Click to collapse
The only problem of Schischu's work only on
1. Graphical glitch
2. Mobile data not working but telephony and text works
3. Video camera, still pictures camera works good.
M.3.S said:
great work thx!
Click to expand...
Click to collapse
mariusing said:
The only problem of Schischu's work only on
1. Graphical glitch
2. Mobile data not working but telephony and text works
3. Video camera, still pictures camera works good.
Click to expand...
Click to collapse
You obviously didn't read the thread from Schischu. It is closed because there are problems with the kernel that need to be solved causing problems for many users. Example: I can't open streaming video in Chrome without it crashing frequently.
achmetinternet said:
You obviously didn't read the thread from Schischu. It is closed because there are problems with the kernel that need to be solved causing problems for many users. Example: I can't open streaming video in Chrome without it crashing frequently.
Click to expand...
Click to collapse
It is closed because he didn't push the kernel anywhere public. Meaning he broke GPL, XDA has a strong stand on that subject.
http://www.xda-developers.com/xda-developers-and-the-gpl/
good! and Thank you
when fixed RIL?
Nice to see other N7 Rom! Thumbs up for T800

[TREBLE] Project treble for natrium

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in it
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
What is Project Treble
Project Treble basically partitions your device into two separate partitions, a system and a vendor: system contains your generic system image, while vendor partition has your device specific files required for booting and running your phone. This way we can easily change the system image and be able to run our device on different system images with the same kernel and vendor partition.
About
Weijianism did not build any verdor image of new version because he does not own this device. Although I am not familiar with android source and android build, I am very happy to learn it so that we natrium owners can use project treble.
So I message to Weijianism to know how to do it and have learnt it for a few weeks. Now I am trying to build vendors. Cause I still know a few about it, It is really very hard for me to solve problems in myself. So if you have any advice, please tell me or push you code in github. THANK YOU!
What is NOT WORKING
Camera
Let's test it together.
Download
ALPHA 0815 (boot.img + vendor.img)
How to
1. wipe everything using TWRP
2. flash boot.img + vendor.img
3. flash system.img
4. reboot to system
Sources
Kernel for msm8996 (lineage-15.1)
Configuration for natrium (lineage-15.1)
Configuration for msm8996 (lineage-15.1) (Minor patches)
Proprietary vendor (lineage-15.1) (Minor patches, forked from Weijianism , credits MZO)
XDA: DevDB Information
Project Treble for Mi 5s Plus
Contributors
Justin_hill
Weijianism
Thanks to
LineageOS
Mi 5s Plus devs
@Weijianism
ROM OS Version: 8.x Oreo
Rom Kernel: Linux 3.x
Version Information
Status: Testing
Created: 2018-08-13
Last Updated: 2018-08-16
Anyone try ?
Well, Bluetooth & Camera won't work on any gsi. Bluetooth service has been stopped. Can't connect to camera.
:c
Bluetooth working, but wifi is always dropping. did you take the drivers from los? also very laggy compared to old treble.
1. bootloop problem solved when using rr gsi. (code from hacker1024)
2. bluetooth service stoped problem solved.
QuiseShampe said:
Well, Bluetooth & Camera won't work on any gsi. Bluetooth service has been stopped. Can't connect to camera.
:c
Click to expand...
Click to collapse
The camera's problem seems very hard, I will try to use GCam later. Now I do have no idea about how to solve it.
You may help me solve it if you like!
pote2639 said:
Bluetooth working, but wifi is always dropping. did you take the drivers from los? also very laggy compared to old treble.
Click to expand...
Click to collapse
Yes, I used code and drivers from los totally.
And I really don't know what happened on your device cause you didn't tell me any useful information (such as what gsi and which version). I only find this kind of problem when using gsi of Android P Developer Preview.
justin_hill said:
Yes, I used code and drivers from los totally.
And I really don't know what happened on your device cause you didn't tell me any useful information (such as what gsi and which version). I only find this kind of problem when using gsi of Android P Developer Preview.
Click to expand...
Click to collapse
I used this version sgsi ones. Build PR1.
https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
pote2639 said:
I used this version sgsi ones. Build PR1.
https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
Click to expand...
Click to collapse
emm, maybe you should not use version of developer preview there is an experimental build of Android pie.
And I am so sorry that I would not like to spend time on version of developer preview.
justin_hill said:
emm, maybe you should not use version of developer preview there is an experimental build of Android pie.
And I am so sorry that I would not like to spend time on version of developer preview.
Click to expand...
Click to collapse
I guess I'll wait for android p stable sgsi build then.
Good day sir!
Is there any chance that this rom will be available to Mi 5s (Capricorn) soon?
rhp_engcoy said:
Good day sir!
Is there any chance that this rom will be available to Mi 5s (Capricorn) soon?
Click to expand...
Click to collapse
Hope for me get a new natrium and I'll do for capricorn and natrium too.
Ofc, as justin did for natrium already, I'm gonna just ship it on my custom ROMs projects, not separated things like capricorn should get it too.
@justin_hill
This is interesting, thanks for taking this up!
I'd like to mention that my last RR build has more recent vendor files than @Weijianism's treble builds.
I'm not sure why bluetooth only works with an RR GSI... That's weird. We need logs, of course.
I've never ported Project Treble to a device before, but I'm happy to help.
With the camera - I think this old branch of the kernel may work. I have no idea why, though.
P.S. I'm hacker1024 on GitHub.
theOriginalSuperl2 said:
@justin_hill
This is interesting, thanks for taking this up!
I'd like to mention that my last RR build has more recent vendor files than @Weijianism's treble builds.
I'm not sure why bluetooth only works with an RR GSI... That's weird. We need logs, of course.
I've never ported Project Treble to a device before, but I'm happy to help.
With the camera - I think this old branch of the kernel may work. I have no idea why, though.
P.S. I'm hacker1024 on GitHub.
Click to expand...
Click to collapse
Yeah, your code have inspired me a lot when I saw your repositories.
Maybe I fixed the bluetooth problem when I add back the libbtnv.so to /vendor/lib/ since it was deleted in this commit.
For the camera problem, I don't know how vendor module relates to kernel. But I will try it afterwards.
Actually I almost know nothing about lineage source code, system build skills and things like this. If you can help, it will be grateful!
any news on the development?
Crescendo Xenomorph said:
any news on the development?
Click to expand...
Click to collapse
About treble support I can tell that I'm gonna include in my ROMs, and maybe I'll give some vendor zips too, if @justin_hill doesn't care about that.
Crescendo Xenomorph said:
any news on the development?
Click to expand...
Click to collapse
Sorry, I am trying to do something about Treble for Android Pie, But there are still several problems unsolved. Cause I'm not familiar with those code, so maybe I can't solve it by myself. It will be so grateful if anyone can contribute to it.
So we will expect @Hlcpereira WORK, Thank you so much!
Hey, is the camera problem solved?
It can't be booting on any sgsi so what should i
do

Categories

Resources