Related
AOSP ROM for Explay Fresh/Wiko Rainbow and clones.
Code:
#ifndef DISCLAIMER_H
#define DISCLAIMER_H
#endif
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Working:
Everything
Flash Instructions:
Backup
Download fresh_l1_stable.rar
Unpack fresh_l1_stable.rar
Flash ROM with SP Flash Tool(use Firmware Upgrade mode)
WARNING! ROM doesn't contain SuperSU or custom recovery. You need your own
Enjoy
XDA:DevDB Information
[ROM][S5501]Lollipop[Wiko Rainbow][UNOFFICIAL], ROM for the Android General
Contributors
ariafan
Source Code: https://github.com/ariafan/S5501-3.10
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Wiko Rainbow or clone
Based On: AOSP
Version Information
Status: Abandoned
Current Stable Version: Stable #1
Stable Release Date: 2016-06-03
Created 2015-07-11
Last Updated 2016-06-22
Changelog:
Code:
[B][SIZE="4"]Stable:[/SIZE][/B]
Added support for Toshiba TYC0FH121597RA eMMC chip(some devices can't boot on previous version)
Added Google apps
Added experimental touchpanel features
Added Explay bootlogo and bootanimation
[B][SIZE="4"]RC1:[/SIZE][/B]
Rebase to ALPS.L1(Android 5.1)
All HW bugs fixed.
[B][SIZE="4"]Beta #5:[/SIZE][/B]
Fixed bug with flipped front camera
Changed encryption mode
Fully working TWRP 2.8.7.0(wipe, backup/restore and zip install are tested)
Waves MaxxAudio included in ROM
[B][SIZE="4"]Beta #4.5:[/SIZE][/B]
Gapps now included in ROM
Black frames fixed
Removed 3G/G icons from statusbar
Now russian letters in dialer removed from english resources
Fixed auto-brightness(now screen doesn't goes black)
Small patches from MTK
[B][SIZE="4"]Beta #4[/SIZE][/B]
Revert back internal memory
External SD-card is default memory
Small bug fixes
[B][SIZE="4"]Beta #3.5:[/SIZE][/B]
Front camera now working on all devices
Repartitioning(2Gb for Userdata partition)
Internal memory removed(now uses only SD card)
Update to 5.0.2(Google and Mediatek patches included)
All rotations allowed in apps and lockscreen(launcher not included)
Enabled Wireless display
PhilZ Touch is default recovery
Screen Record (thx to @Shahbaz23 )
Easy flash tutorial and video preview(thanks to @smokerman )
Good work!! :good:
[*]Flash GAPPS 5.0(take here http://forum.xda-developers.com/showpost.php?p=59691695&postcount=3)
which gapps we should take please provide direct downloading link.
shubham tech said:
[*]Flash GAPPS 5.0(take here http://forum.xda-developers.com/showpost.php?p=59691695&postcount=3)
which gapps we should take please provide direct downloading link.
Click to expand...
Click to collapse
You can select any GAPPS for Android 5.0.x. For example, minimal version - https://www.androidfilehost.com/?fid=95916177934550850
Hey, OP! I built the kernel 3.10.72 and it works in the recovery. I don't know what to do next?
I'm trying to run the CM12, but I see only LOGO.BIN. Please help me.
View attachment dmesg.log
View attachment logcat.txt
hyperion70 said:
Hey, OP! I built the kernel 3.10.72 and it works in the recovery. I don't know what to do next?
View attachment 3400804
I'm trying to run the CM12, but I see only LOGO.BIN. Please help me.
View attachment 3400806
View attachment 3400807
Click to expand...
Click to collapse
You should compile full rom because you need update vendor binaries and libraries(hwcomposer, gralloc etc)
How is battery-drain?
GPS working?
Is it based on Android 5.0.0 or 5.0.2?
Lecterr said:
How is battery-drain?
GPS working?
Is it based on Android 5.0.0 or 5.0.2?
Click to expand...
Click to collapse
Battery - better than cm12
GPS - working fine(for me)
It's a 5.0.2 based rom
goood work bro (Y)
ariafan said:
Battery - better than cm12
GPS - working fine(for me)
It's a 5.0.2 based rom
Click to expand...
Click to collapse
Perfect - and is there a way back to STOCK Rainbow 4.4.2?
Lecterr said:
Perfect - and is there a way back to STOCK Rainbow 4.4.2?
Click to expand...
Click to collapse
Flash wiko rom with sp flash tool(firmware upgrade mode)
Hello @ariafan, I am using My|Phone Agua Rio, and I believe that I do correctly the installation process that you've indicated in your thread, It had a problem on the camera app, Only the front cam is working and it theres no switch to main cam, its almost perfect and that's the only problem that I've encountered. How can I fix this? By changing libs from our cam to this?
sent from my My|Phone Agua Rio using XDA Free mobile app
Kyzrael said:
Hello @ariafan, I am using My|Phone Agua Rio, and I believe that I do correctly the installation process that you've indicated in your thread, It had a problem on the camera app, Only the front cam is working and it theres no switch to main cam, its almost perfect and that's the only problem that I've encountered. How can I fix this? By changing libs from our cam to this?
sent from my My|Phone Agua Rio using XDA Free mobile app
Click to expand...
Click to collapse
Pls wait some. I'm working on this problem
Lecterr said:
Perfect - and is there a way back to STOCK Rainbow 4.4.2?
Click to expand...
Click to collapse
flash kitkat using sp flash tool
choose firmware upgrade r format+download
So here is my review
Firstly i tried same method on mmx a120 (as given by op)
bt it stucked on system.img @ 30%........i understand that it was unable to write
so again tried many way bt same........then i tried with all files loaded except system,cache,data
and booted to custom recovery
as soon i started flashing....it's stuck on 50% flashing.....1/2 hrs +
so i guess something was wrong....so i again ported philz recovery from mmx a106 bt same.....then i understood ....it was not able to flash .dat file.......so for this fix.......i unpacked,packed with meta-inf just like cm 12.1 how i ported from kingzone k1 on mt6592 (second device )
finally flashed fully and i was able to boot rom
i restore imei and everything is seems working great
except proximity issue...(remains 0 value )....i tried to boot into factory mode bt since there is new uboot.bin i guess it's missing.....
Overall Grt Work Bro
hope u soon fix remaining bug and proximity issue (else my dad gonna kill me )
Awesome Work mate
@ariafan Thanks for the rom...great work man..
I already have the pa gapps 5.0 package(which works with cm 12) will that works with this rom
niyas90 said:
@ariafan Thanks for the rom...great work man..
I already have the pa gapps 5.0 package(which works with cm 12) will that works with this rom
Click to expand...
Click to collapse
I think it should work
ariafan said:
I think it should work
Click to expand...
Click to collapse
Yes is works...
Completed the flashing ..everything working smoothly as said in the OP...
Once again thanks mate...
brother ariafan i loved ur rom its awesome
thanks a lot for the rom
for me both front camera n back camera are working
focus not working
and can u pls add the feature of moving apps to sd card pls n all apps doesnt save the data in external sd card
like whatsapp ,uc browser downloads to internal sd card nif i set download path to external sd card it shows no permission
can u pls fix this bro
i loved ur rom like anythng
thanks a lot lot for ur work n amazng rom
Deprecated, move to http://forum.xda-developers.com/oneplus-3/development/rom-unofficial-cyanogenmod-13-t3399089
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Official CyanogenMod Wiki:http://wiki.cyanogenmod.org/w/Main_Page
Important information:
This thread is for CyanogenMod 13.0 builds for OnePlus 3. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Features:
Now the device is mainly maintained by Grarak, Steve Kondik, Altaf Patel and me
Merged latest f2fs stable branch for linux 3.18.y, F2FS is supprted
Update kernel to linux 3.18.36
Support CDMA
Support call recording
Camera HDR mode works well
SELinux set to enforcing
Enabled cpusets
Known bugs:
No VOOC/DASH support
To be discovered
TODO:
Add kernel level color calibration support
Perf related enhancement
Installation:
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery, my TWRP is highly recommended because it supports both decryption and F2FS: http://forum.xda-developers.com/oneplus-3/development/recovery-twrp-3-0-2-0-touch-recovery-t3402999
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Optional: Install the Google Apps addon package
Reboot
Source code:
https://github.com/cyanogenmod
https://github.com/cyanogenmod/android_device_oneplus_oneplus3
https://github.com/cyanogenmod/android_kernel_oneplus_msm8996
https://github.com/TheMuppets/proprietary_vendor_oneplus
Changelog:
16/6/21:
First release with latest CM source
16/7/3:
Sync latest CM source
Update proprietary blobs
Steve pulled lots of telephony patches from CAF, he says telephony now works fine for him
Miscellaneous bug fixes and tweaks
Download:
https://s.basketbuild.com/devs/dianlujitao/oneplus3/cm13
Credits:
CyanogenMod Team
Code Aurora Forum
OnePlusOSS
ivan19871002 (graphics and camera HDR mode)
Grarak
Steve Kondik
Altaf Patel
Other CyanogenMod developers
XDA:DevDB Information
CyanogenMod, ROM for the OnePlus 3
Contributors
dianlujitao
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 2
Beta Release Date: 2016-07-03
Created 2016-06-21
Last Updated 2016-07-03
been fan of your work on honor 4x and z9 max...good to see you here...
good job! Wonder whether the camera could be as good as the stock one
I get com.andorid.phone FC during setup stage. Cannot complete setup.
--deleted--
Volte is broke FYI.
EggZenBeanz said:
I get com.andorid.phone FC during setup stage. Cannot complete setup.
Click to expand...
Click to collapse
Maybe you have 2 sim cards, right. Remove one and try...
Good job done bro
..keep up
Sent from my TECNO W4 using Tapatalk
EggZenBeanz said:
I get com.andorid.phone FC during setup stage. Cannot complete setup.
Click to expand...
Click to collapse
Had the same problem restarted to twrp re-wiped everything and re-flashed and been smooth sailing ever since.
Are you going to add sRGB mode?
I've an issue with .mp4 files.
All work fine except .mp4 files ... mu OP3 cannot read them, all of them !
Someother with this strange issue ?
No VoLTE. Here's a logcat.
stupid ?, does the fingerprint sensor work with cm13 or just stock?
Bradl79 said:
stupid ?, does the fingerprint sensor work with cm13 or just stock?
Click to expand...
Click to collapse
Works with CM
itsLewin said:
Works with CM
Click to expand...
Click to collapse
thank you, do u know how easy it is to go back to stock OxygenOS from a nandroid backup, do u know if i need to do anything special like reflash firmware or something, since our TWRP does not back those up, thank u
Bradl79 said:
thank you, do u know how easy it is to go back to stock OxygenOS from a nandroid backup, do u know if i need to do anything special like reflash firmware or something, since our TWRP does not back those up, thank u
Click to expand...
Click to collapse
Remember to set your screen unlock to swipe before making the backup as your unock pattern wont be valid after a restore. I had this situation already twice.
Planet X said:
Remember to set your screen unlock to swipe before making the backup as your unock pattern wont be valid after a restore. I had this situation already twice.
Click to expand...
Click to collapse
Yeah I have done that too lol, other than that anything else I need to do
@dianlujitao thanks for your hard work, following it on the cmxlog Mind sharing a new build with the new kernel stuff etc?
matssa said:
@dianlujitao thanks for your hard work, following it on the cmxlog Mind sharing a new build with the new kernel stuff etc?
Click to expand...
Click to collapse
Still WIP in many fields
dianlujitao said:
Still WIP in many fields
Click to expand...
Click to collapse
Yeah I thought so ^^ But since Grarak isn't sharing any new builds (mostly because there is WIP), I though that maybe you could share yours Anyhow, I hope CM13 will sort out official builds sonn
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Hi Guys!
!!!! This is the first smartwatch with an Android 6 !!!! (not wear)
Here you will find my CyanogenMod 13 (Android 6) Rom for the Hexxa Atenea (Mediatek MT6572 SoC), and clones.
Please be sure to read (and re-read) carefully, to avoid unnecessary questions.
This is an Unofficial Source Build, so it will NOT be supported by the CyanogenMod Team
THIS IS ONLY FOR EXPERIENCED USERS THAT KNOW HOW TO FLASH A MEDIATEK DEVICE USING FLASH TOOLS. I WILL NOT ANSWER ANY QUESTION REGARDING HOW TO FLASH, HOW TO INSTALL DRIVERS, OR ANYTHING NOT RELATED WITH INTERNAL ROM USAGE!!! I prefer spend my few spare time fixing things that answering things that are already answered in XDA or Google.
This rom is based in Hexxa Atenea official ROM, but with some modifications:
Data size is now 2.4Gb and sdcard is emulated inside data partition. Now you have +2Gb to install apps. But if you do wipe, the "sdcard" is deleted too, so be careful of what do you store there.
The Launcher is the ClockSkin (thanks @riktop) app modified with an app list, so it's a fully working skin manager with an app launcher.
Thanks also to @blerfont because it takes the clockskin app and convert it to a full launcher for round watches.
It also work without any issues on the clones (mt6572):
- No1 D5
- Other clones
CyanogenMod 13 Status:
Working:
- All
Not Working / Needs Improvements :
-Nothing I found.
Flash Instructions:
Backup, Backup, Backup ... Use MtkDroidTools for backup (http://forum.xda-developers.com/showthread.php?t=2730031)
Flash the image with Flashtools (http://forum.xda-developers.com/showthread.php?t=2730031)
To enter flashtool mode, shutdown the device before put it in the base. Search Internet for more info.
To flash select Firmware Upgrade or your data partition will not change. If you finish and data has +- 630Mb, reflash using Firmware Upgrade.
Recovery instructions:
Use your stock flastool image to restore the smartwatch.
This rom doesn't have Google Apps. If you want to add them, search for Open Gapps and install pico version.
Mirror download link: https://mega.nz/#!8dRRiThQ!cEATH8peK2VYvdn0bWtcDaOYo1iT3f1dtp2BPRSq2yw
GPL Compliance:
Device: https://github.com/corvusmod/device_hexxa_atenea
Vendor : https://github.com/corvusmod/vendor_hexxa_atenea
Credits:
CyanogenMod Team
MediatekAndroidDevelopers (fire855, ferhung and the rest of the team)
Moyster
BlueFlame4
People at CM for Mediatek thread (http://forum.xda-developers.com/showthread.php?t=2274332)
XDA:DevDB Information
[ROM][UNOFFICIAL] CM 13 [6.0.1] Hexxa Atenea [MT6572] and Clones [SMARTWATCH], ROM for the Smart Watches
Contributors
corvus, blerfont
ROM OS Version: 6.0.x Marshmallow
Based On: CM13
Version Information
Status: Stable
Created 2016-10-27
Last Updated 2016-10-27
Reserved
Some images of the watch: https://photos.google.com/share/AF1QipPoATO0k-sE9VJpF8RQbAtramTGXkc6ftOyt14cVlHt6rPPk2uVjnPeTgTrPB2I5A?key=ZFpqbEhLd3Boa1dOYVBNOVpWMGFybjE4YTRrOWdB
And test the new clockskin launcher with gestures:
Swipe right = Weather app
Swipe left = Health app
Swipe up = Control Bar
Thanks.
The CM 13 for the No.1 D5+ (w612), MT6580, would be really great.
seppen said:
Thanks.
The CM 13 for the No.1 D5+ (w612), MT6580, would be really great.
Click to expand...
Click to collapse
He doesn't have one of those watches so it is unlikely
@corvus great effort mate. Didn't take you long to move up from 5.1
I'll dig out my old d5 again and give it a test run.
Thanks again mate
pablo11 said:
He doesn't have one of those watches so it is unlikely
@corvus great effort mate. Didn't take you long to move up from 5.1
I'll dig out my old d5 again and give it a test run.
Thanks again mate
Click to expand...
Click to collapse
@corvus
If you need some help.
I would test a CM 13 for w612, MT6580 on my D5+.
Woow!! very nice work!! but how go back in menu?? Thank corvus!
Steve Giordano said:
Woow!! very nice work!! but how go back in menu?? Thank corvus!
Click to expand...
Click to collapse
You can use power button:
1 short press = sleep
1 long press = power menu
2 short presses = back button
3 short presses = menu button
Hi, watch helper work?? This firmware with notification bluetooth would be the best!
ps: in recovery not found sdcard partition.
corvus said:
You can use power button:
1 short press = sleep
1 long press = power menu
2 short presses = back button
3 short presses = menu button
Click to expand...
Click to collapse
Hey Corvus - and others - Just a warning here.
My hardware button has broken after using it so much for these menu operations.
Luckily I have spare watches but for some this could be a real issue.
A way to go "back" is really really important here.....
---------- Post added at 09:24 PM ---------- Previous post was at 09:21 PM ----------
Steve Giordano said:
Hi, watch helper work?? This firmware with notification bluetooth would be the best!
ps: in recovery not found sdcard partition.
Click to expand...
Click to collapse
Steve - use M2D - Pascal has developed it especially for these watches now.
It works really well. See here: http://roundandroidwatches.proboards.com/thread/182/apps-sender-bluetooth-manager-receiver
PS - SD card is now the data partition as he said in the OP.... So won't show in recovery
pablo11 said:
Hey Corvus - and others - Just a warning here.
My hardware button has broken after using it so much for these menu operations.
Luckily I have spare watches but for some this could be a real issue.
A way to go "back" is really really important here.....
---------- Post added at 09:24 PM ---------- Previous post was at 09:21 PM ----------
Steve - use M2D - Pascal has developed it especially for these watches now.
It works really well. See here: http://roundandroidwatches.proboards.com/thread/182/apps-sender-bluetooth-manager-receiver
PS - SD card is now the data partition as he said in the OP.... So won't show in recovery
Click to expand...
Click to collapse
Hi, How configure M2d?!
Go check out the link I posted and ask for help if needed ?
Sent from my HTC 2PS6200 using Tapatalk
pablo11 said:
Go check out the link I posted and ask for help if needed
Sent from my HTC 2PS6200 using Tapatalk
Click to expand...
Click to collapse
Woow thank pablo11 work very well!! Corvus can you add M2d applications on stock app? and Swipe right open M2d receiver ?? It would be wonderful!!
I'm thinking about some ways to add a soft back button or some kind of gesture that works system-wide. Will be in next version. Also seems that is some kind of problem with mic.
We are trying to add notifications to the launcher, but I don't know if it will be ready for next version.
I try to add M2D to the rom, and talked with the developer, but it launch at boot and is pretty intrusive, so I choose not to add it to the rom. Install it at hand. Also I can't add the notifications, because if some users don't use M2D what will happen with this swipe move?.
corvus said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Hi Guys!
!!!! This is the first smartwatch with an Android 6 !!!! (not wear)
Here you will find my CyanogenMod 13 (Android 6) Rom for the Hexxa Atenea (Mediatek MT6572 SoC), and clones.
Please be sure to read (and re-read) carefully, to avoid unnecessary questions.
This is an Unofficial Source Build, so it will NOT be supported by the CyanogenMod Team
THIS IS ONLY FOR EXPERIENCED USERS THAT KNOW HOW TO FLASH A MEDIATEK DEVICE USING FLASH TOOLS. I WILL NOT ANSWER ANY QUESTION REGARDING HOW TO FLASH, HOW TO INSTALL DRIVERS, OR ANYTHING NOT RELATED WITH INTERNAL ROM USAGE!!! I prefer spend my few spare time fixing things that answering things that are already answered in XDA or Google.
This rom is based in Hexxa Atenea official ROM, but with some modifications:
Data size is now 2.4Gb and sdcard is emulated inside data partition. Now you have +2Gb to install apps. But if you do wipe, the "sdcard" is deleted too, so be careful of what do you store there.
The Launcher is the ClockSkin (thanks @riktop) app modified with an app list, so it's a fully working skin manager with an app launcher.
Thanks also to @blerfont because it takes the clockskin app and convert it to a full launcher for round watches.
It also work without any issues on the clones (mt6572):
- No1 D5
- Other clones
CyanogenMod 13 Status:
Working:
- All
Not Working / Needs Improvements :
-Nothing I found.
Flash Instructions:
Backup, Backup, Backup ... Use MtkDroidTools for backup (http://forum.xda-developers.com/showthread.php?t=2730031)
Flash the image with Flashtools (http://forum.xda-developers.com/showthread.php?t=2730031)
To enter flashtool mode, shutdown the device before put it in the base. Search Internet for more info.
To flash select Firmware Upgrade or your data partition will not change. If you finish and data has +- 630Mb, reflash using Firmware Upgrade.
Recovery instructions:
Use your stock flastool image to restore the smartwatch.
This rom doesn't have Google Apps. If you want to add them, search for Open Gapps and install pico version.
Mirror download link: https://mega.nz/#!8dRRiThQ!cEATH8peK2VYvdn0bWtcDaOYo1iT3f1dtp2BPRSq2yw
GPL Compliance:
Device: https://github.com/corvusmod/device_hexxa_atenea
Vendor : https://github.com/corvusmod/vendor_hexxa_atenea
Credits:
CyanogenMod Team
MediatekAndroidDevelopers (fire855, ferhung and the rest of the team)
Moyster
BlueFlame4
People at CM for Mediatek thread (http://forum.xda-developers.com/showthread.php?t=2274332)
XDA:DevDB Information
[ROM][UNOFFICIAL] CM 13 [6.0.1] Hexxa Atenea [MT6572] and Clones [SMARTWATCH], ROM for the Smart Watches
Contributors
corvus, blerfont
ROM OS Version: 6.0.x Marshmallow
Based On: CM13
Version Information
Status: Stable
Created 2016-10-27
Last Updated 2016-10-27
Click to expand...
Click to collapse
does this work for the k8/k18 round watch? it is MTK6572 too.
tried flashing your firmware but bricked it ... you think its the wrong preloader.bin only? i'm back on stock firmware now but would love to have this.
thanks
roufster said:
does this work for the k8/k18 round watch? it is MTK6572 too.
tried flashing your firmware but bricked it ... you think its the wrong preloader.bin only? i'm back on stock firmware now but would love to have this.
thanks
Click to expand...
Click to collapse
Try taking MBR, EBR1, system, recovery, boot and userdata files from my image and copy them to the stock flashtools image for k18. I haven't tested it, so I can't say that this will work. And more important, I don't know if this will brick your device, so do it at your own risk.
corvus said:
Try taking MBR, EBR1, system, recovery, boot and userdata files from my image and copy them to the stock flashtools image for k18. I haven't tested it, so I can't say that this will work. And more important, I don't know if this will brick your device, so do it at your own risk.
Click to expand...
Click to collapse
thanks. I tried it, didn't work. I can see the world logo for second on startup and then nothing ... its step-up because if I flash your full rom, I cant even see the world logo.
Wow, thank you!
Hi,
is there a wake up function in your rom when i raise up my wrist???
thank you
dax32 said:
Hi,
is there a wake up function in your rom when i raise up my wrist???
thank you
Click to expand...
Click to collapse
No by now and I don't know if it will ever be, because it's a battery eater.
Could you please implement LMT or something like that instead of pressing the hardware button for back and menu? Of cause everyone can install it after they install the rom. But I think it will work better if it is integrated
P.S. have seen now on proboard you made it already some days ago
AospExtended v5
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
AOSP Extended is an AOSP based rom which provides stock UI/UX with various customisations features along with the Substratum theme engine. The project has been made by cherry-picking various commits from various other projects. Being based on AOSP it provides a smooth and lag-free experience out of the box. We will constantly try to add more features and make it even better in future updates. A ROM by a user, for a user. #StayAOSP #ExtendYourDevice #BeExtended
Working
Boots
Wifi
Bluetooth
Camera
RIL (Calls, SMS, Data)
Video Playback
Audio
Camcorder
HDR
GPS
Fast charger
Fingerprint
Not Working/Bugs
CM-14.1 bugs
NFC
VoLTE
Installation
Requires Unlocked Bootloader & a custom recovery
Place ROM & Gapps in your virtual SD
Reboot in recovery Mode
Wipe Data/Factory Reset
Wipe Dalvik cache
Install the ROM zip
DO NOT REBOOT
Install the Gapps zip
Reboot
Downloads
Rom AFH
Gapps
Sources
Kernel
Donate
If you liked the work and wish to donate then here is the:
* paypal *
paypal.me/FireLord
[email protected]
* paytm *
https://goo.gl/76r53R
XDA:DevDB Information
[ROM][8.0.0][P2] Alpha Aex 5, ROM for the Lenovo P2
Contributors
FireLord, Subham, chaubeyprateek
Source Code: https://github.com/AospExtended
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: s244 stock and twrp
Based On: AOSP
Version Information
Status: Alpha
Created 2017-10-07
Last Updated 2017-10-08
Message
1. DO not report bugs.. its still in alpha, i just wanted to let you try it once.. (i use at as daily driver anyway)
2. This thread will be transferred to current aex maintainer after los thread by me.
3. Delete nfc apk from system to avoid battery drain
4. NO eta for fixes
5. N stopped? no, not yet!
I have waited for a long time for android O for P2 Firelord your are the genius thanks for bring android O to p2
Wow. Thanks a ton. You're the best
Awesome.
Sent from my Lenovo P2 using Tapatalk
Great work thanks
Sent from my Lenovo P2a42 using Tapatalk
Nice going...
Sent from my LENOVO Lenovo P2a42 using XDA Labs
Thnqqq
Some screenies.... Cheers
Btw its a subs theme.
You are the best!
Thanks for taking your time and effort to make it happen. When it's all done this phone will be unbelievable.
This "Alpha" version is more stable then Nougat "stable" version of AEX ROM. This ROM makes Nougat ROM look like a joke.
Thanks Bro A Lot .... Appreciating It
---------- Post added at 12:19 AM ---------- Previous post was at 12:18 AM ----------
PL15 said:
Some screenies.... Cheers
Btw its a subs theme.
Click to expand...
Click to collapse
Which theme is it ?
Great work @FireLord smooth ROM? haven't encountered any bugs except for fingerprint but it's mentioned. I can also confirm LED is working with Lightflow ?
Great news....
Still Waiting for bootloader unlocking time.
Try ASAP ??
PL15 said:
Some screenies.... Cheers
Btw its a subs theme.
Click to expand...
Click to collapse
theme name
AWESOME!!!!
U R like a god!
Great start:good:
Boot times are faster than nougat ..
This ROM is awesome ?
schitz786 said:
Thanks Bro A Lot .... Appreciating It
---------- Post added at 12:19 AM ---------- Previous post was at 12:18 AM ----------
Which theme is it ?
Click to expand...
Click to collapse
Aospui Black
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code review
Treble spported TWRP by ATGdroid
Download>https://androidfilehost.com/?fid=5862345805528059847
LineageOS v15.1 Unofficial TREBLE ENABLED Rom by @thestrechh
Build Date-: 28/07/2018
Changelog:
* LineageOS source update
* Fix audio in calls, BT, jack (no tested) in GSI ROMS.
Download:
https://drive.google.com/file/d/1o2OJ2d5Niu4rlQv1yVrWmhCyZkr3A4_M/view
Carlos' today treble build Vendor + Kernel only Based on LOS
Download Link-:
https://drive.google.com/file/d/17loTYfZmcPjYy9Lh9kB-CfEv5-1ogTLa/view
Note-:
=>"Vendor + kernel only" no system
Subscribe @kenzoromnews for more
How to flash. First flash trouble supported TWRP.
Flash treble supported ROM=GApps. Flash reboot enjoy.
Note: this is not my work I am just sharing this build to all credit the. @strechh Dav well done
Will try this
LineageOS v15.1 Unofficial TREBLE ENABLED Rom by @thestrechh
Build Date-: 28/07/2018
Changelog:
* LineageOS source update
* Fix audio in calls, BT, jack (no tested) in GSI ROMS.
Download:
lineage-15.1-20180728-UNOFFICIAL-kenzo.zip
Subscribe @kenzoromnews for more
arnabbandopadhyay said:
Will try this[/Q
UOTE
Ok
Click to expand...
Click to collapse
What do you mean today's treble build vendor is it new vendor build or same as alex9 build
Wait downloading links
sharan565 said:
What do you mean today's treble build vendor is it new vendor build or same as alex9 build
Click to expand...
Click to collapse
Yes
Azizbagwan said:
Yes
Click to expand...
Click to collapse
New vendors? So what are the changes?
I'm already on alex9 vendors with dot os GSI system can I flash your vendor only or do I need to flash your los rom
anybody tried resurrection remix or havoc gsi with this vendor?
is volte working?
is headphone bug solved?
share your experiences?
Will the treble builds have Mobile Network Standby battery drain issue?
First people were crying 'treble for kenzo' now there is some beta rom, they are not ready to try it out asking for bugs, if none will try, how will we know bugs ? Can't expect bugless & stable treble rom i you are not ready to test it
vatsal_chandan said:
First people were crying 'treble for kenzo' now there is some beta rom, they are not ready to try it out asking for bugs, if none will try, how will we know bugs ? Can't expect bugless & stable treble rom i you are not ready to test it
Click to expand...
Click to collapse
Wait... Downloading...
---------- Post added at 12:18 PM ---------- Previous post was at 12:17 PM ----------
Thank you for the awesome rom... Will report after testing
unable to install... error 7 every time
Azizbagwan said:
Note: this is not my work I am just sharing this build to all
Click to expand...
Click to collapse
Thread moved as sharing is not development
@Azizbagwan thanks for sharing! But could you tell us where you got that rom and vendor+boot zip. Did you extract vendor yourself? If yes, from where?
---------- Post added at 08:08 PM ---------- Previous post was at 08:06 PM ----------
harshalsingh1990 said:
unable to install... error 7 every time
Click to expand...
Click to collapse
Are you using the twrp linked here?
jame02 said:
@Azizbagwan thanks for sharing! But could you tell us where you got that rom and vendor+boot zip. Did you extract vendor yourself? If yes, from where?
---------- Post added at 08:08 PM ---------- Previous post was at 08:06 PM ----------
Are you using the twrp linked here?
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=5862345805528059847 yes this twrp I am using perfect treble twrp
jame02 said:
@Azizbagwan thanks for sharing! But could you tell us where you got that rom and vendor+boot zip. Did you extract vendor yourself? If yes, from where?
---------- Post added at 08:08 PM ---------- Previous post was at 08:06 PM ----------
Are you using the twrp linked here?
Click to expand...
Click to collapse
i did... maybe the file i downloaded got corrupted... i installed arrow gsi... when i installed vendor+kernel before gsi... on booting the device was encrypted... couldn't get to main screen... again, did all wipes, installed gsi and this time kernel+vendor after... the rom booted... said there was an error in vendor... after that the rom worked absolutely fine... only bt calls and volte not working... rest all, almost perfect
It shows me "A vendor image mismatch has been de
tected. Typically this means your vendor
image is out of date. Please ensure your
vendor image matches OPM2.171026." when I reboot my phone
Deng Baohua said:
It shows me "A vendor image mismatch has been de
tected. Typically this means your vendor
image is out of date. Please ensure your
vendor image matches OPM2.171026." when I reboot my phone
Click to expand...
Click to collapse
it will... for a while now... till all the bugs are fixed... but, rest works alright?
harshalsingh1990 said:
it will... for a while now... till all the bugs are fixed... but, rest works alright?
Click to expand...
Click to collapse
I want to flash a new gsi and then reply to you.