Hello all a6020a46 users like me.
I have here a way to update the phone to S155, the official Lenovo update for Android M (6.0.1), which is only released in some countries in South America. Although I'm on Brazil, my version is not the a6020l36, but the a6020a46.
It's all pretty simple to do and you can do from any ROM, but I recommend that you be on the last available stock (I made it from AEX 4.1 and had no problems). Everything will be done from a backup made by TWRP
Tutorial:
1- Download the backup here: Android File Host
Or here: MediaFire
2- Unzip somewhere and copy to root of any storage.
p.s. If you have any saved updates, copy the TWRP folder from your mobile phone to somewhere on your PC and delete it before copying TWRP from the update.
3- Enter Recovery mode and make a Full-Wipe (Be careful not to delete the partition where the backup is saved).
4- Go Restore and select the update (1970-06-18--19-03-18 ...) and select ONLY Boot and System. Deselect all and select Boot and System only.
SELECT ONLY BOOT AND SYSTEM!!!!
5- System reboot.
p.s. If the phone takes too long to start, remove the battery for some time and try again, I had to do this.
I hope it works for everyone as it worked for me. It had few changes in the interface, but had many bugs solved. I recommend to test and see for yourself.
None of this would be possible if Aleph Scalioni had not backed up the update for us.
So, thank you very much Aleph Scalioni :highfive:
Forgive me for any mistake
The backup (twrp) work with 6020a40 il have tested but only language brazil, portugues and english.
Possible to have a version with all language ?
Sorry for my bad english i'm french
puntoflo said:
The backup (twrp) work with 6020a40 il have tested but only language brazil, portugues and english.
Possible to have a version with all language ?
Sorry for my bad english i'm french
Click to expand...
Click to collapse
Probably not. It is available only in Portuguese, Spanish and English.
Since it was only launched for countries with these languages, and English for being universal (?).
Why lenovo update only a new version for brazil ?
This version work with european models, just ad language and all is good with ...vibe k5
This update is for a6020a46 or A6020I36, in other thread So they say??
Does this work with a6020a40 720p 2gb variant ?
kykemejia said:
This update is for a6020a46 or A6020I36, in other thread So they say??
Click to expand...
Click to collapse
[email protected] said:
Does this work with a6020a40 720p 2gb variant ?
Click to expand...
Click to collapse
It works on Whirlpool refrigerators also...
nlooooo said:
It works on Whirlpool refrigerators also...
Click to expand...
Click to collapse
What does that mean...?
[email protected] said:
What does that mean...?
Click to expand...
Click to collapse
That means try and see...
nlooooo said:
It works on Whirlpool refrigerators also...
Click to expand...
Click to collapse
And also on my car, sound machine, etc.
Speaking in seriously is only a doubt, becouse into folder is this name:
1970-06-18--19-03-18_A6020l36_S155_170212_LAS
[email protected] said:
Does this work with a6020a40 720p 2gb variant ?
Click to expand...
Click to collapse
Yes yes yes it.s my phone too, but all language it's not present
When you select backup twrp, select all but firmware, reboot phone and wait, if your phone not boot ...open batterie and reboot and all is good.
Volte is available here?
Does this method works on a6020a46 3GB variant???
MaxPresi said:
Hello all a6020a46 users like me.
I have here a way to update the phone to S155, the official Lenovo update for Android M (6.0.1), which is only released in some countries in South America. Although I'm on Brazil, my version is not the a6020l36, but the a6020a46.
It's all pretty simple to do and you can do from any ROM, but I recommend that you be on the last available stock (I made it from AEX 4.1 and had no problems). Everything will be done from a backup made by TWRP
Tutorial:
1- Download the backup here: Android File Host
Or here: MediaFire
2- Unzip somewhere and copy to root of any storage.
p.s. If you have any saved updates, copy the TWRP folder from your mobile phone to somewhere on your PC and delete it before copying TWRP from the update.
3- Enter Recovery mode and make a Full-Wipe (Be careful not to delete the partition where the backup is saved).
4- Go Restore and select the update (1970-06-18--19-03-18 ...) and select ONLY Boot and System. Deselect all and select Boot and System only.
SELECT ONLY BOOT AND SYSTEM!!!!
5- System reboot.
p.s. If the phone takes too long to start, remove the battery for some time and try again, I had to do this.
I hope it works for everyone as it worked for me. It had few changes in the interface, but had many bugs solved. I recommend to test and see for yourself.
None of this would be possible if Aleph Scalioni had not backed up the update for us.
So, thank you very much Aleph Scalioni :highfive:
Forgive me for any mistake
Click to expand...
Click to collapse
I think your 2nd step is wrong we have to unzip it in the TWRP folder which is under sdcard1 (or sdcard0).....
aakashacjarjee said:
Volte is available here?
Click to expand...
Click to collapse
Dhruv7508 said:
Does this method works on a6020a46 3GB variant???
Sent from my K5 Plus using XDA Labs
Click to expand...
Click to collapse
I don't know and I have no way to test. If you want to test, tell me if it works.
I think your 2nd step is wrong we have to unzip it in the TWRP folder which is under sdcard1 (or sdcard0).....
Sent from my K5 Plus using XDA Labs
Click to expand...
Click to collapse
No, inside the compressed file is the TWRP folder. It should be placed directly on the root of internal or external storage. Putting it inside the TWRP folder you will get TWRP/TWRP/Backup/... and TWRP will not recognize it.
MaxPresi said:
No, inside the compressed file is the TWRP folder. It should be placed directly on the root of internal or external storage. Putting it inside the TWRP folder you will get TWRP/TWRP/Backup/... and TWRP will not recognize it.
Click to expand...
Click to collapse
Ok thanks...
I unzip , and copy it to sdcard and internal storage.But when go to TWRP , in tab restore , i cant see anythings. Help me!!
RealEmo said:
I unzip , and copy it to sdcard and internal storage.But when go to TWRP , in tab restore , i cant see anythings. Help me!!
Click to expand...
Click to collapse
You need to rename the folder inside the backup to match your phone "serial" (make other backup and copy the code) , so twrp can see the backup.
If this works hit that thanks button:good:
@MaxPresi I think you forgot to mention that this ROM doesn't support VoLTE..
1 . Create a minimal backup
2. Replace the files on your backup (the final folder, where the individual files are) with the files from backup you've downloaded
3. Install ONLY system and boot [installing firmware will result in error]
---------- Post added at 12:39 PM ---------- Previous post was at 12:33 PM ----------
Dhruv7508 said:
You need to rename the folder inside the backup to match your phone "serial" (make other backup and copy the code) , so twrp can see the backup
---------- Post added at 05:38 PM ---------- Previous post was at 05:36 PM ----------
@MaxPresi I think you forgot to mention that this ROM doesn't support VoLTE..
Click to expand...
Click to collapse
Yes, followed this indication and worked for me. :good::good:
Dhruv7508 said:
You need to rename the folder inside the backup to match your phone "serial" (make other backup and copy the code) , so twrp can see the backup
---------- Post added at 05:38 PM ---------- Previous post was at 05:36 PM ----------
@MaxPresi I think you forgot to mention that this ROM doesn't support VoLTE..
Click to expand...
Click to collapse
Its work!!! Thanks so much, i hope k5 devs can make this is a fully and stable rom for all k5 varians.
P/s in a6020 a40 Dolby Atmos has stopped.
Related
For all, who want to DEODEX and ROOT their SGA.
Thanks to the Russian folk-author finist1 every owner of the SGA can easily, without having any additional knowledge, without using a computer perform the procedure of DEODEX and ROOT.
Read carefully before do anything.
Step by step procedure:
0. you must have already installed the appropriate firmware version.
1. download zip-file appropriate to your firmware version.
2. copy zip-file to the root of your SD-card.
3. connect your phone to an external power source (USB, for example) because update fairly large and long established.
4. boot into recovery mode (Home + Power)
5. navigate with volume button, then select wipe data/factory reset (so before do anything - back up personal data)
5. navigate with volume button, then select apply update from sdcard
6. select your zip-file
7. navigate with volume button, then select reboot system now
Now you have completely clean system with DEODEX and ROOT.
Download update appropriate to your firmware version:
OS 2.2.1 S5830XXKC1
OS 2.3.3 S5830XXKPE
OS 2.3.4 S5830XXKPH
OS 2.3.4 S5830XXKPL
OS 2.3.4 S5830ZCKA7
OS 2.3.4 S5830DDKQ5
OS 2.3.4 S5830DXKPB
OS 2.3.4 S5830DXKPB DEODEXED+CWM+CF-ROOT b80 for flashing with ODIN (pda+modem). Mirror
OS 2.3.4 S5830DXKPD
Notes for S5830DXKPD:
This update is only inserts deodexed files, it does not erase your data and your apps and framework. But do not forget to wipe the cache!
OS 2.3.5 S5830XXKPO Thanks to INFINUM from 4pda.ru
DDKQ6 2.3.4
Thanks to this method, you can easily delete unwanted applications from update before performing the procedure. Just open your downloaded file and remove unwanted applications from system\app directory of your archive.
(You must know and understand what applications can be removed without harm to your system.)
Then, perform the procedure described above using your archive.
New versions of Samsung`s FW are very difficult to deodex&root, thats why there is new method:
This update are fully equivalent to full re-flashing!!! You will loose all your data!!!
You can apply this update to any FW`s version you want.
Localization are Russian, Ukrainian and English ONLY.
1. This update is a full FW
2. You can install it with recovery
3. This update will format your partitions to ext4
4. S5830XWKPY_S5830SEKKP6 - CF-b80 and CWM4 are included
S5830XWKS9_S5830XWKS2 - CM7 kernel and CWM4 are included
5. Full deodex and root.
6. DT will work with this.
7. !!!Do not work Scripts from a folder init.d!!!
Download:
S5830XWKPY_S5830SEKKP6
S5830XWKS9_S5830XWKS2
New full-working versions:This is an independent firmware with deodex, root, ext4 for all partitions, working scripts from init.d folder (allinone Ram Script included) and autobackup of all user data on every boot to your SD card.
Thanks to finist1.
ос 2.3.5 S5830XWKS9_S5830XWKS2
ос 2.3.3 S5830XWKPY_S530XWKP8
ос 2.3.5 S5830XXKPO_S5830XXKPO_S5830XXKPO
CF-82, CWM 5.0.2.6, DEODEX, Autobackup, languages: english, russian, ukrain.
S5830BUKS2_S5830XWKS2
S5830XXKPP_S5830XXKPP with extended power menu (thanks to INFINUM)
another version: OS 2.3.6 S5830SERKPP Deodex full
Is the factory reset really necessary?
pujitjuneja said:
Is the factory reset really necessary?
Click to expand...
Click to collapse
same thing i wanted to ask..!!
pujitjuneja said:
Is the factory reset really necessary?
Click to expand...
Click to collapse
Reset is not required, but needed just in case.
will this work if you already have root?
superples said:
will this work if you already have root?
Click to expand...
Click to collapse
Yes, this will work.
Any way, you can (if you want) unroot first with this update (do it from recovery mode):
Today I am edit update for KPH and use it, this program, which I deleted, cos I don`t use them:
Street.apk, GenieWidget.apk, Maps.apk, bookstore2_v37.apk, Forest.apk, GoogleQuickSearchBox.apk, Hangman.apk, musicodp_v15.apk, SamsungApps.apk, SamsungWidget_StockClock.apk, thinkdroid.apk, DualClock.apk, AxT9IME.apk
And all work just fine.
Question
is this possible to add Persian support to this update ? if yes i must change font and libskia.so liskiagl.so and libswebcore.so ? can i use file from official rom of galaxy s ? or 2.2.1 o galaxy ace ?
hero2003 said:
is this possible to add Persian support to this update ? if yes i must change font and libskia.so liskiagl.so and libswebcore.so ? can i use file from official rom of galaxy s ? or 2.2.1 o galaxy ace ?
Click to expand...
Click to collapse
all these updates are only for european version of firmware. For region XX. If you can, you must modify updates for you region, but you need original firmware for this. If something goes wrong you allways can flash original firmware with the help of ODIN.
Lovetz said:
Today I am edit update for KPH and use it, this program, which I deleted, cos I don`t use them:
Street.apk, GenieWidget.apk, Maps.apk, bookstore2_v37.apk, Forest.apk, GoogleQuickSearchBox.apk, Hangman.apk, musicodp_v15.apk, SamsungApps.apk, SamsungWidget_StockClock.apk, thinkdroid.apk, DualClock.apk, AxT9IME.apk
And all work just fine.
Click to expand...
Click to collapse
Hey..
How u edited those applications..
Means did u just downloaded attached deodex file..extract the same..delete not required apps from system/app and repack using winzip..??
Is this the procedure..??
Lovetz said:
all these updates are only for european version of firmware. For region XX. If you can, you must modify updates for you region, but you need original firmware for this. If something goes wrong you allways can flash original firmware with the help of ODIN.
Click to expand...
Click to collapse
thx for reply , but i dont rly know which file i must inc. in this update , i got hebfix.zip update for KPE and VR rom it work fine for em but now i need new update .
silver2706 said:
Hey..
How u edited those applications..
Means did u just downloaded attached deodex file..extract the same..delete not required apps from system/app and repack using winzip..??
Is this the procedure..??
Click to expand...
Click to collapse
Just delete these .apk from zip. I use Total Commander for this operation.
You can include your apps to update:
1. Install your app to SD
2. Copy lib and apk of installed app
3. Paste these files to the system path of update
4. Use your update from recovery mode.
But you must understand that the place in the systems is not unlimited.
You can even do separete update for your apps. For example attached update will add to you system apps Puffin Web Browser.
hero2003 said:
thx for reply , but i dont rly know which file i must inc. in this update , i got hebfix.zip update for KPE and VR rom it work fine for em but now i need new update .
Click to expand...
Click to collapse
You can try to use your hebfix.zip update for KPE. If something wrong you can flash original firmware with the help of ODIN.
hero2003 said:
thx for reply , but i dont rly know which file i must inc. in this update , i got hebfix.zip update for KPE and VR rom it work fine for em but now i need new update .
Click to expand...
Click to collapse
here r the files for that u need to replace for heb fix.
u need to dodex your framwork and replace the framework file and lib files .
i think that u can replace those files in update.zip that u have for KPE .
Hey..after i installed this update..my internal memory used 58.14 MB..???
Normally..setup used 25 MB od internal space...This update used that much of internal memory space..???
Pls tell me the benefit of this update...
silver2706 said:
Pls tell me the benefit of this update...
Click to expand...
Click to collapse
You can use the search on the forum or by Google in order to find out what is deodex and why you need it.
If you do not know why you need it, then most likely you do not need it at all.)
Before Deodex i have only 13 MB free memory in system folder when i deodexed i have 32 MB free memory in system folder. Check with root explorer.
Lovetz..I did it..but i m nt software professional..so couldnot understand..so..pl if u can tell me in brief..it will nice of u..
And it consume that much of memory..is this normal..???
Sent from my GT-S5830 using XDA App
silver2706 said:
And it consume that much of memory..is this normal..???
Click to expand...
Click to collapse
Have you do a wipe before you make update?
Any way If you just flash clean KPH you have ~150 Mb of free space.
If you wipe and then use this update, then you have ~135 Mb of free space.
And this is normal.
Lovetz said:
Have you do a wipe before you make update?
Any way If you just flash clean KPH you have ~150 Mb of free space.
If you wipe and then use this update, then you have ~135 Mb of free space.
And this is normal.
Click to expand...
Click to collapse
I did wipeout..before update..and normally after KPH free space with me was 155..buy after update..free space was 121 mb..
Sent from my GT-S5830 using XDA App
KitKat Write to ext_sd FIX
Sometimes when you edit the build.prop and restart your phone, the changes you have made in the build.prop are gone.
This zip must be flashed through recovery, custom recovery of course.
After flashing this, your apps will be able to read/write on external memory. Apps like Titanium Backup for example, or any app that needs to read/write the external memory of the device.
For example in Titanium Backup you can set your external memory as the default storage for backups, this way saving some internal memory.
INSTRUCTIONS
Put the zip on your sdcard
Go to recovery
Click Install
Choose /external_sd
Click on KitKat Write to ext_sd FIX
Swipe to confirm Flash
These instructions are for TWRP recovery, but in CWM it's pretty much the same.
Thanks to @TEKHD for making this for SAMSUNG devices.
I just ported this to HTC and modified the platform.xml
Should work on both stock and custom rooted ROM's.
NO S-OFF required.
WARNING :
I am not responsible for any damage to your device while installing this, proceed at your own risk.
This zip was tested on a HTC ONE M8 device.
Dev-Host Download link
KitKat Write to ext_sd FIX
Download link soon....what is soon ? Why open a thread without a link. Why not wait until you got an actual file to share ?
I find that so weird......and useless
Mr Hofs said:
Download link soon....what is soon ? Why open a thread without a link. Why not wait until you got an actual file to share ?
I find that so weird......and useless
Click to expand...
Click to collapse
Ok, delete it if you want. The link will be up in a few hours. Do what you want.
EDIT : The file is up for download in the first post.
Do what i want......yeah thought it was the opposite way haha
I won't delete it, but good for you that you got the link up. As you probably have read in the xda rules that so called "placeholders" are not very welcome
Cheers.
Mr Hofs said:
Do what i want......yeah thought it was the opposite way haha
I won't delete it, but good for you that you got the link up. As you probably have read in the xda rules that so called "placeholders" are not very welcome
Cheers.
Click to expand...
Click to collapse
Yes, I know the XDA rules, and I understand your point of view.
No ''placeholders'' here
GRAPHIKXS said:
KitKat Write to ext_sd FIX
Sometimes when you edit the build.prop and restart your phone, the changes you have made in the build.prop are gone.
This zip must be flashed through recovery, custom recovery of course.
After flashing this, your apps will be able to read/write on external memory. Apps like Titanium Backup for example, or any app that needs to read/write the external memory of the device.
For example in Titanium Backup you can set your external memory as the default storage for backups, this way saving some internal memory.
INSTRUCTIONS
Put the zip on your sdcard
Go to recovery
Click Install
Choose /external_sd
Click on KitKat Write to ext_sd FIX
Swipe to confirm Flash
These instructions are for TWRP recovery, but in CWM it's pretty much the same.
Thanks to @TEKHD for making this for SAMSUNG devices.
I just ported this to HTC and modified the platform.xml
Should work on both stock and custom rooted ROM's.
NO S-OFF required.
WARNING :
I am not responsible for any damage to your device while installing this, proceed at your own risk.
This zip was tested on a HTC ONE M8 device.
Dev-Host Download link
KitKat Write to ext_sd FIX
Click to expand...
Click to collapse
You should add info that You are not the one who tested it first even, xseroboy - that's what you should have in your profile. You better write step by step tutorial, as it will take less time to change the file by hand, than it will take to flash the file.... or should I say, copy it from the original?
Garrett_PL said:
You should add info that You are not the one who tested it first even, xseroboy - that's what you should have in your profile. You better write step by step tutorial, as it will take less time to change the file by hand, than it will take to flash the file.... or should I say, copy it from the original?
Click to expand...
Click to collapse
Say what?
GRAPHIKXS said:
Say what?
What step by step tutorial man, are you crazy?
I've flashed this and it's all good, the tutorial is more then enough, or you are an idiot?
Click to expand...
Click to collapse
Taking our little misunderstanding yesterday, i must say that you come in pretty strong (hostile)....calling people crazy....and an idiot. I would strongly yet kindly suggest that you consider your your words as it's not the other party here calling you any names.
You kinda did the same to me
Cheers
mateenf said:
Hello All,
Since kitkat 4.4.2 was released on the Galaxy Note 3, many users were unable to write files to the External SD Card. Below is a simple fix for rooted users on the Galaxy Note 3 N9005 ( International Snapdragon Variant).
**Please be advised that I have only tested this on my personal N9005. However, you are free to test it on your own devices at your own risk!! **
1. Using a root-enabled file manager, navigate to /system/etc/permissions
2. Edit platform.xml and find the WRITE_EXTERNAL_STORAGE permission.
3. Add an additional group definition for this permission...<group gid="media_rw" />
4. Save the changes to the file.
5. Restart.
Click to expand...
Click to collapse
Relax, and see above.
Mr Hofs said:
Taking our little misunderstanding yesterday, i must say that you come in pretty strong (hostile)....calling people crazy....and an idiot. I would strongly yet kindly suggest that you consider your your words as it's not the other party here calling you any names.
You kinda did the same to me
Cheers
Click to expand...
Click to collapse
OKI DOKI
Garrett_PL said:
Relax, and see above.
Click to expand...
Click to collapse
Ok, I don't see where it says : xseroboy.
If you show me a thread where it says that he create this, I'll thank him too.
And another thing. THE ARE ALL THE INSTRUCTION YOU/ALL NEED.
Just flash it.
No need for editing anything else, this was flashed by me on my own HTC ONE M8 by flashing it without any problems.
Thank you thank you thank you thank you thank you....
Please support this:
http://en.miui.com/thread-154009-1-1.html
We don't even have a reliable root or twrp support and you ask for porting roms?!
LOL
haasgo said:
Please support this:
http://en.miui.com/thread-154009-1-1.html
Click to expand...
Click to collapse
It's my Post Support It
---------- Post added at 01:23 PM ---------- Previous post was at 01:22 PM ----------
haasgo said:
Please support this:
http://en.miui.com/thread-154009-1-1.html
Click to expand...
Click to collapse
Piemo said:
We don't even have a reliable root or twrp support and you ask for porting roms?!
LOL
Click to expand...
Click to collapse
My Honor 7 is rooted
Piemo said:
We don't even have a reliable root or twrp support and you ask for porting roms?!
LOL
Click to expand...
Click to collapse
Root is available and twrp is available as well eventhough its in chinese
I said before, for have good TWRP, and working, for Honor 7:
1) Download this file : https://mega.nz/#!LkwWQBLa!m64TEV30Z4UiPfhv27tx5LfAo9dA2GTChHyxcQtTmZM (File is : ui.zip / 26.5 Mo )
This is one theme, in English, for, the only one working TWRP running for Honor 7.
2) On your phone, create one folder, "TWRP" inside internal memory, in the root.
3) Inside, of "TWRP" folder, create another one folder, that you call "theme", inside put it the "ui.zip" file without rename. Of Course, the theme will uncompress, during working.
!!! Use only this recovery :
https://mega.nz/#!a0wjAJ7a!wmDLq8Cz4Kfb5a01z3K-xsTrDWBO2lVv8Nxym7qHtkM for the moment is only this one working (File is : twrp_cn.img / 8Mo )
It's chinese, but with the theme, I gave you before, you don't care, because your have one TWRP working in English.
4) Flash this recovery, and only this one !!!
5) After that you will have one good recovery on your phone.
NB: Source in French is : http://www.jeuxvideo.com/forums/42-...honor-7-unlock-bootloader-root-rom-custom.htm but Google Translator can help you in this hard "Way..." Easy for me because... I'm French... LOL
If you have the time to say "Thank You" to the source, as well , Thanks for US.
If Not, Or if you don't want subscribe to the French Forum. I can say, thank you for you, and I will transmit, to the French WebSite.
But, don't forget, if this post can help you, to make more, don't forget to say thank you
Be Honor 7 And of course, more When, one new Honor will coming...
LePocketPc said:
I said before, for have good TWRP, and working, for Honor 7:
1) Download this file : https://mega.nz/#!LkwWQBLa!m64TEV30Z...GTChHyxcQtTmZM (File is : ui.zip / 26.5 Mo )
This is one theme, in English, for, the only one working TWRP running for Honor 7.
2) On your phone, create one folder, "TWRP" inside internal memory, in the root.
3) Inside, of "TWRP" folder, create another one folder, that you call "theme", inside put it the "ui.zip" file without rename. Of Course, the theme will uncompress, during working.
!!! Use only this recovery :
https://mega.nz/#!a0wjAJ7a!wmDLq8Cz4...lVv8Nxym7qHtkM for the moment is only this one working (File is : twrp_cn.img / 8Mo )
It's chinese, but with the theme, I gave you before, you don't care, because your have one TWRP working in English.
4) Flash this recovery, and only this one !!!
5) After that you will have one good recovery on your phone.
NB: Source in French is : http://www.jeuxvideo.com/forums/42-1...rom-custom.htm but Google Translator can help you in this hard "Way..." Easy for me because... I'm French... LOL
If you have the time to say "Thank You" to the source, as well , Thanks for US.
If Not, Or if you don't want subscribe to the French Forum. I can say, thank you for you, and I will transmit, to the French WebSite.
But, don't forget, if this post can help you, to make more, don't forget to say thank you
Be Honor 7 And of course, more When, one new Honor will coming...
Click to expand...
Click to collapse
ui.zip download asks for a password, source link is not correct
Anyway thanks
Piemo said:
ui.zip download asks for a password, source link is not correct
Anyway thanks
Click to expand...
Click to collapse
Oups, links corrected
[/B][/B]
LePocketPc said:
I said before, for have good TWRP, and working, for Honor 7:
1) Download this file : https://mega.nz/#!LkwWQBLa!m64TEV30Z4UiPfhv27tx5LfAo9dA2GTChHyxcQtTmZM (File is : ui.zip / 26.5 Mo )
This is one theme, in English, for, the only one working TWRP running for Honor 7.
2) On your phone, create one folder, "TWRP" inside internal memory, in the root.
3) Inside, of "TWRP" folder, create another one folder, that you call "theme", inside put it the "ui.zip" file without rename. Of Course, the theme will uncompress, during working.
!!! Use only this recovery :
https://mega.nz/#!a0wjAJ7a!wmDLq8Cz4Kfb5a01z3K-xsTrDWBO2lVv8Nxym7qHtkM for the moment is only this one working (File is : twrp_cn.img / 8Mo )
It's chinese, but with the theme, I gave you before, you don't care, because your have one TWRP working in English.
4) Flash this recovery, and only this one !!!
5) After that you will have one good recovery on your phone.
NB: Source in French is : http://www.jeuxvideo.com/forums/42-...honor-7-unlock-bootloader-root-rom-custom.htm but Google Translator can help you in this hard "Way..." Easy for me because... I'm French... LOL
If you have the time to say "Thank You" to the source, as well , Thanks for US.
If Not, Or if you don't want subscribe to the French Forum. I can say, thank you for you, and I will transmit, to the French WebSite.
But, don't forget, if this post can help you, to make more, don't forget to say thank you
Be Honor 7 And of course, more When, one new Honor will coming...
Click to expand...
Click to collapse
Merci beaucoup pour ton Travail
(Thank you for your Works)
can some1 pls attach ui.zip here cannot download the file there
evilmumi said:
can some1 pls attach ui.zip here cannot download the file there
Click to expand...
Click to collapse
Et voila
Thanks voor the UI, now have TWRP in english
the given links are broken again!!!
Please correct it!
thanks LePocketPc but i create a folder \TWRP\theme there is the zip
still got chinese version 2.8.7.0 i think
evilmumi said:
thanks LePocketPc but i create a folder \TWRP\theme there is the zip
still got chinese version 2.8.7.0 i think
Click to expand...
Click to collapse
please read here:http://forum.xda-developers.com/showpost.php?p=56224204&postcount=2
please use the internal SD to create the folder /TWRP/theme at first!
Exact, in internal memory
ui.zip must be in : storage/emulated/0/TWRP/theme
hey there
thanks for the tips, LePocketPc
phone is rooted and everything
can anybody make a twrp backup of a PLK L01 stock rom and upload it?? that would be very much welcome! and needed!!! )
Can't download twrp, link is broken ?
try the second link out from here:http://forum.xda-developers.com/showpost.php?p=62856109&postcount=5
sending 'recovery' (26726 KB)...
OKAY [ 0.691s]
writing 'recovery'...
OKAY [ 0.608s]
finished. total time: 1.299s
Click to expand...
Click to collapse
But it still boot the stock recovery. Any suggestions?
Tylonhh said:
But it still boot the stock recovery. Any suggestions?
Click to expand...
Click to collapse
Same here! I flashed the chinese TWRP, he says OKAY, but it still boots stock "Huawei eRecovery"!
Cheers,
Sebastian
---------- Post added at 19:53 ---------- Previous post was at 19:23 ----------
OK, now I got it. You need to press and hold Power & VolUp & VolDown & SpecialKey.
That brings you to TWRP. Just holding Power & VolUp, as normal, boots up "Huawei eRecovery".
astitle says, I have been trying to install this since few hours now, can any ome please make up noob freindly guide
dryspuri said:
astitle says, I have been trying to install this since few hours now, can any ome please make up noob freindly guide
Click to expand...
Click to collapse
0) You need PLK-L01 EU Phone!
1) You need stock firmware installed B121 or B140
2) You need stock recovery installed
3) You need full stock without any changes in the firmware files.
3.1) You need UNrooted phone!
4) delete all app from SD card
5) download upgrade package for you FW version
6) rename it to update.zip
7) copy update.zip to SD card in to dload folder
8) start local update from the settings menu.
Things to look out for:
it will not perform the update on a modified system
if you have never rooted it should be fine..
TWRP will no longer function until someone builds a new version
THERE IS NO WAY BACK!! Right now you cannot go back to LP, you cannot change your mind, cannot root and cannot use twrp, think before you upgrade to a BETA firmware...
Dumaxa said:
0) You need PLK-L01 EU Phone!
1) You need stock firmware installed B121 or B140
2) You need stock recovery installed
3) You need full stock without any changes in the firmware files.
3.1) You need UNrooted phone!
4) delete all app from SD card
5) download upgrade package for you FW version
6) rename it to update.zip
7) copy update.zip to SD card in to dload folder
8) start local update from the settings menu.
Things to look out for:
it will not perform the update on a modified system
if you have never rooted it should be fine..
TWRP will no longer function until someone builds a new version
THERE IS NO WAY BACK!! Right now you cannot go back to LP, you cannot change your mind, cannot root and cannot use twrp, think before you upgrade to a BETA firmware...
Click to expand...
Click to collapse
Many thanks, I can't find dload folder. I have not installed external sd is that the problem
Just make that folder
Szumy said:
Just make that folder
Click to expand...
Click to collapse
yeah i did that, then got in boot loop, i guess may have updated from 121 to mm, that was a mistake i guess
so now i am gonna go in 121-130-140-mm using sd card dload folder
dryspuri said:
yeah i did that, then got in boot loop, i guess may have updated from 121 to mm, that was a mistake i guess
so now i am gonna go in 121-130-140-mm using sd card dload folder
Click to expand...
Click to collapse
You should be able to upgrade from 121 using the 121->313 package
dryspuri said:
yeah i did that, then got in boot loop, i guess may have updated from 121 to mm, that was a mistake i guess
so now i am gonna go in 121-130-140-mm using sd card dload folder
Click to expand...
Click to collapse
I don't think so since you have package with B121 > B313 update. Did you create the folder before? And was the update package in .zip?
Dumaxa said:
Things to look out for:
it will not perform the update on a modified system
if you have never rooted it should be fine..
TWRP will no longer function until someone builds a new version
THERE IS NO WAY BACK!! Right now you cannot go back to LP, you cannot change your mind, cannot root and cannot use twrp, think before you upgrade to a BETA firmware...
Click to expand...
Click to collapse
You can change the bits you 'borrowed' from my post as there is a way back now (and at least you said thanks )
Nice guide btw.
Szumy said:
I don't think so since you have package with B121 > B313 update. Did you create the folder before? And was the update package in .zip?
Click to expand...
Click to collapse
Ha I did the most stupid thing did not read the whole post and was trying to do things without understanding. You wonder what a year of ios does to you. You become lazy don't read stuff and you think things work by there own. Anyway thanks all for all the info and I live xda
Sent from my HTC One M9 using Tapatalk
dryspuri said:
Ha I did the most stupid thing did not read the whole post and was trying to do things without understanding. You wonder what a year of ios does to you. You become lazy don't read stuff and you think things work by there own. Anyway thanks all for all the info and I live xda
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Haha, no problem sir Glad i could help
Just got G82XX support for Flashtool. use this u can flash rom.
View attachment G82XX.rar
anyway to get this for xperia xa1 (G3**) too?
how to add it to my flashtool
IcemanSu said:
Just got G82XX support for Flashtool. use this u can flash rom.
View attachment 4138911
Click to expand...
Click to collapse
Please teach me ... i dont know how add this file to my current flashtool ?
Please teach me ... i dont know how add this file to my current flashtool ?????
XuanDinh said:
Please teach me ... i dont know how add this file to my current flashtool ?
Please teach me ... i dont know how add this file to my current flashtool ?????
Click to expand...
Click to collapse
You can add folder to. C > user >username>.flashtool>device
Flashtool auto delete it
Same problem with me here! After copy to devices folder but when run flashtool delete new device automatically
Please help!
taolao.pw said:
Same problem with me here! After copy to devices folder but when run flashtool delete new device automatically
Please help!
Click to expand...
Click to collapse
Update flashtool, and put this folder into c://(username)/.Flashtool/device's
root
how do I get root with this tool?
Ice, where exactly did you get the file. I have been trying for weeks to get Androxyde to add support (reached out to him by twitter)
Is there a forum or something? or did you figure it out yourself? if so how/where? I may need to know for future reference.
AND MANY THANKS. I got my fingerprint reader back!
IcemanSu said:
Just got G82XX support for Flashtool. use this u can flash rom.
View attachment 4138911
Click to expand...
Click to collapse
inteltecra1700 said:
Ice, where exactly did you get the file. I have been trying for weeks to get Androxyde to add support (reached out to him by twitter)
Is there a forum or something? or did you figure it out yourself? if so how/where? I may need to know for future reference.
AND MANY THANKS. I got my fingerprint reader back!
Click to expand...
Click to collapse
From a chinese forum http://www.mnmingx.com/forum.php
You Sir, are a hero for finding this. and the guys who patched it are legends. Many thanks!
IcemanSu said:
From a chinese forum http://www.mnmingx.com/forum.php
Click to expand...
Click to collapse
After downloading, extract it, you will now have a “folder G82XX“.
Now open latest version of flashtol which you have downloaded. Once all scripts are loaded, you will see: Loaded 94 devices.
Now copy the “folder G82XX” to %userprofile%\.flashTool\devices (copy this to “RUN”).
Now open flashtool, click: Device – Manage – Import, you will see: Loaded 95 devices.
---------- Post added at 08:57 AM ---------- Previous post was at 08:54 AM ----------
After downloading, extract it, you will now have a “folder G82XX“.
Now open latest version of flashtol which you have downloaded. Once all scripts are loaded, you will see: Loaded 94 devices.
Now copy the “folder G82XX” to %userprofile%\.flashTool\devices (copy this to “RUN”).
Now open flashtool, click: Device – Manage – Import, you will see: Loaded 95 devices.
Anyway to add XZ premium G8142?
wow :bối rối:
I am working on new flasher which will support new sony flashing protocol, hope soon...
Edit:
As a promised I am finished it! Here you go https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426 , happy flashing!
munjeni said:
I am working on new flasher which will support new sony flashing protocol, hope soon...
Edit:
As a promised I am finished it! Here you go https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426 , happy flashing!
Click to expand...
Click to collapse
"You probably don't/didn't own a Mediatek-based Xperia device, flashing them without the FSC scripts will result in a failed flash and a hard bricked phone in 99% of cases, and the other 1% are the lucky ones where the flashing fails but the phone is left in a somewhat recoverable state..."
I wonder how you respond to this comment
carefen said:
"You probably don't/didn't own a Mediatek-based Xperia device, flashing them without the FSC scripts will result in a failed flash and a hard bricked phone in 99% of cases, and the other 1% are the lucky ones where the flashing fails but the phone is left in a somewhat recoverable state..."
I wonder how you respond to this comment
Click to expand...
Click to collapse
My respond to it https://forum.xda-developers.com/xperia-m5/help/help-comfirming-related-to-flashing-t3625133 , somebody need to confirm! On booth tools I newer used any fsc script and nobody bricked its phone with newflasher or xflasher, but allso nobody tried to flash it on mediatek based phone, so somebody need to try and confirm it. Again I continue to believe that fsc is uneeded at all! Please read all conversations between me and Androxyde to understand why I mean all this! I'm still continue to believe that flashtool had an bug which caused hard bricks on mediatek devices (again need somebody try my tools and confirm negative)
HHSM said:
After downloading, extract it, you will now have a “folder G82XX“.
Now open latest version of flashtol which you have downloaded. Once all scripts are loaded, you will see: Loaded 94 devices.
Now copy the “folder G82XX” to %userprofile%\.flashTool\devices (copy this to “RUN”).
Now open flashtool, click: Device – Manage – Import, you will see: Loaded 95 devices.
---------- Post added at 08:57 AM ---------- Previous post was at 08:54 AM ----------
After downloading, extract it, you will now have a “folder G82XX“.
Now open latest version of flashtol which you have downloaded. Once all scripts are loaded, you will see: Loaded 94 devices.
Now copy the “folder G82XX” to %userprofile%\.flashTool\devices (copy this to “RUN”).
Now open flashtool, click: Device – Manage – Import, you will see: Loaded 95 devices.
Click to expand...
Click to collapse
What do you mean by "Copy this to RUN" ?
Also, I see 99 devices (v0.9.23.2) and the folder G82XX already exists, although it has 2 files in it instead of 3...
DeNuNietNooitNiet said:
What do you mean by "Copy this to RUN" ?
Also, I see 99 devices (v0.9.23.2) and the folder G82XX already exists, although it has 2 files in it instead of 3...
Click to expand...
Click to collapse
Delete that folder add the new folder then click export and then import the new folder and tadaa worked for me
Verstuurd vanaf mijn G8231 met Tapatalk
munjeni said:
I am working on new flasher which will support new sony flashing protocol, hope soon...
Edit:
As a promised I am finished it! Here you go https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426 , happy flashing!
Click to expand...
Click to collapse
Doesnt work with XZs it seems