Database Users

[Q] Clean ROM flash

Getting ready to do the Clean ROM flash and I have a few questions:
1. The instructions say to Copy ROM to storage. When I navigate to my phone hooked to my PC, I can't find the "storage" folder. Any help with this step would be appreciated
2. How do I boot into recovery?
I have twrp installed and phone's rooted. Just need to know the button config. to go into recovery to follow the installation steps. TY

thestrangebrew said:
Getting ready to do the Clean ROM flash and I have a few questions:
1. The instructions say to Copy ROM to storage. When I navigate to my phone hooked to my PC, I can't find the "storage" folder. Any help with this step would be appreciated
2. How do I boot into recovery?
I have twrp installed and phone's rooted. Just need to know the button config. to go into recovery to follow the installation steps. TY
Click to expand...
Click to collapse
LOL! Sorry I had too. Someone needs there Coffee You copy the rom to your phones storage like where your pictures,Music, and stuff are at. They didnt say anything about a storage folder.
and 2. Download an app called reboot recovery in the market place
You should be cautious when flashing anything if you were looking for a "Storage" folder.

hyelton said:
LOL! Sorry I had too. Someone needs there Coffee You copy the rom to your phones storage like where your pictures,Music, and stuff are at. They didnt say anything about a storage folder.
and 2. Download an app called reboot recovery in the market place
You should be cautious when flashing anything if you were looking for a "Storage" folder.
Click to expand...
Click to collapse
LOL I know, I feel like a total noob for even asking. I have to have instructions literally step for step or else I lose confidence and don't follow through. I'm coming from an SGS2 that I rooted and messed with for the 1st month and never flashed anything since, so I'm pretty much starting over with this ROM stuff. Thanks for the help though!
EDIT: I'm gonna ask another noob question: Do I copy just the img file or the META & System folders too?

thestrangebrew said:
LOL I know, I feel like a total noob for even asking. I have to have instructions literally step for step or else I lose confidence and don't follow through. I'm coming from an SGS2 that I rooted and messed with for the 1st month and never flashed anything since, so I'm pretty much starting over with this ROM stuff. Thanks for the help though!
EDIT: I'm gonna ask another noob question: Do I copy just the img file or the META & System folders too?
Click to expand...
Click to collapse
:crying: what img file and meta system folders ? :crying: Don`t extract the zipped download, The ZIP is what you flash You dont have to extract it.
Ahhh S2 I had that phone when it came out it was one of my longest owned phones.

hyelton said:
:crying: what img file and meta system folders ? :crying: Don`t extract the zipped download, The ZIP is what you flash You dont have to extract it.
Click to expand...
Click to collapse
Holy smokes. I extracted it. ok i'll move the zip to storage. Thanks!

thestrangebrew said:
I'm gonna ask another noob question: Do I copy just the img file or the META & System folders too?
Click to expand...
Click to collapse
Dude! Never be afraid to ask (but if the answers are on the website and you didn't do a proper search, expect flame on!). :laugh:
Anyway, assuming you are on AT&T, you should have downloaded a file called CleanROM-1.1.zip . If you didn't get that one, go here http://www.scottsroms.com/downloads.php?do=file&id=464 and download it. Check the MD5 to ensure the file is not corrupt. Do not unzip the file! Just transfer the file onto your phone - it doesn't really matter where, just remember where you put it. Then reboot into recovery (assuming you have already installed TWRP) using whatever app you like (I prefer GooManager), click Install, navigate to the rom you just put on your phone and you're good to go.
Good luck!

AmbroseAI said:
Dude! Never be afraid to ask (but if the answers are on the website and you didn't do a proper search, expect flame on!). :laugh:
Anyway, assuming you are on AT&T, you should have downloaded a file called CleanROM-1.1.zip . If you didn't get that one, go here http://www.scottsroms.com/downloads.php?do=file&id=464 and download it. Check the MD5 to ensure the file is not corrupt. Do not unzip the file! Just transfer the file onto your phone - it doesn't really matter where, just remember where you put it. Then reboot into recovery (assuming you have already installed TWRP) using whatever app you like (I prefer GooManager), click Install, navigate to the rom you just put on your phone and you're good to go.
Good luck!
Click to expand...
Click to collapse
Thanks yea I did get teh 1.1 ROM and twrp is installed already. I just didn't want to go any further until I for sure understood the process. This feels alot easier then when I was working on the sgs2 and Odin. That and it's been at least 2 years since I've done anything like this lol. Thanks for the help, it looks like it's flashing now!

thestrangebrew said:
LOL I know, I feel like a total noob for even asking. I have to have instructions literally step for step or else I lose confidence and don't follow through. I'm coming from an SGS2 that I rooted and messed with for the 1st month and never flashed anything since, so I'm pretty much starting over with this ROM stuff. Thanks for the help though!
EDIT: I'm gonna ask another noob question: Do I copy just the img file or the META & System folders too?
Click to expand...
Click to collapse
thestrangebrew said:
Holy smokes. I extracted it. ok i'll move the zip to storage. Thanks!
Click to expand...
Click to collapse
It happens, Now you should be able to flash, Any Flashable roms you never need to extract them just flash

Success!! I've been de-virginized! Thanks for you help guys!!

KitKat Write to ext_sd FIX | DOWNLOAD NOW

KitKat Write to ext_sd FIX
Sometimes when you edit the build.prop and restart your phone, the changes you have made in the build.prop are gone.
This zip must be flashed through recovery, custom recovery of course.
After flashing this, your apps will be able to read/write on external memory. Apps like Titanium Backup for example, or any app that needs to read/write the external memory of the device.
For example in Titanium Backup you can set your external memory as the default storage for backups, this way saving some internal memory.
INSTRUCTIONS
Put the zip on your sdcard
Go to recovery
Click Install
Choose /external_sd
Click on KitKat Write to ext_sd FIX
Swipe to confirm Flash
These instructions are for TWRP recovery, but in CWM it's pretty much the same.
Thanks to @TEKHD for making this for SAMSUNG devices.
I just ported this to HTC and modified the platform.xml
Should work on both stock and custom rooted ROM's.
NO S-OFF required.
WARNING :
I am not responsible for any damage to your device while installing this, proceed at your own risk.
This zip was tested on a HTC ONE M8 device.
Dev-Host Download link
KitKat Write to ext_sd FIX

Download link soon....what is soon ? Why open a thread without a link. Why not wait until you got an actual file to share ?
I find that so weird......and useless

Mr Hofs said:
Download link soon....what is soon ? Why open a thread without a link. Why not wait until you got an actual file to share ?
I find that so weird......and useless
Click to expand...
Click to collapse
Ok, delete it if you want. The link will be up in a few hours. Do what you want.
EDIT : The file is up for download in the first post.

Do what i want......yeah thought it was the opposite way haha
I won't delete it, but good for you that you got the link up. As you probably have read in the xda rules that so called "placeholders" are not very welcome
Cheers.

Mr Hofs said:
Do what i want......yeah thought it was the opposite way haha
I won't delete it, but good for you that you got the link up. As you probably have read in the xda rules that so called "placeholders" are not very welcome
Cheers.
Click to expand...
Click to collapse
Yes, I know the XDA rules, and I understand your point of view.
No ''placeholders'' here

GRAPHIKXS said:
KitKat Write to ext_sd FIX
Sometimes when you edit the build.prop and restart your phone, the changes you have made in the build.prop are gone.
This zip must be flashed through recovery, custom recovery of course.
After flashing this, your apps will be able to read/write on external memory. Apps like Titanium Backup for example, or any app that needs to read/write the external memory of the device.
For example in Titanium Backup you can set your external memory as the default storage for backups, this way saving some internal memory.
INSTRUCTIONS
Put the zip on your sdcard
Go to recovery
Click Install
Choose /external_sd
Click on KitKat Write to ext_sd FIX
Swipe to confirm Flash
These instructions are for TWRP recovery, but in CWM it's pretty much the same.
Thanks to @TEKHD for making this for SAMSUNG devices.
I just ported this to HTC and modified the platform.xml
Should work on both stock and custom rooted ROM's.
NO S-OFF required.
WARNING :
I am not responsible for any damage to your device while installing this, proceed at your own risk.
This zip was tested on a HTC ONE M8 device.
Dev-Host Download link
KitKat Write to ext_sd FIX
Click to expand...
Click to collapse
You should add info that You are not the one who tested it first even, xseroboy - that's what you should have in your profile. You better write step by step tutorial, as it will take less time to change the file by hand, than it will take to flash the file.... or should I say, copy it from the original?

Garrett_PL said:
You should add info that You are not the one who tested it first even, xseroboy - that's what you should have in your profile. You better write step by step tutorial, as it will take less time to change the file by hand, than it will take to flash the file.... or should I say, copy it from the original?
Click to expand...
Click to collapse
Say what?

GRAPHIKXS said:
Say what?
What step by step tutorial man, are you crazy?
I've flashed this and it's all good, the tutorial is more then enough, or you are an idiot?
Click to expand...
Click to collapse
Taking our little misunderstanding yesterday, i must say that you come in pretty strong (hostile)....calling people crazy....and an idiot. I would strongly yet kindly suggest that you consider your your words as it's not the other party here calling you any names.
You kinda did the same to me
Cheers

mateenf said:
Hello All,
Since kitkat 4.4.2 was released on the Galaxy Note 3, many users were unable to write files to the External SD Card. Below is a simple fix for rooted users on the Galaxy Note 3 N9005 ( International Snapdragon Variant).
**Please be advised that I have only tested this on my personal N9005. However, you are free to test it on your own devices at your own risk!! **
1. Using a root-enabled file manager, navigate to /system/etc/permissions
2. Edit platform.xml and find the WRITE_EXTERNAL_STORAGE permission.
3. Add an additional group definition for this permission...<group gid="media_rw" />
4. Save the changes to the file.
5. Restart.
Click to expand...
Click to collapse
Relax, and see above.

Mr Hofs said:
Taking our little misunderstanding yesterday, i must say that you come in pretty strong (hostile)....calling people crazy....and an idiot. I would strongly yet kindly suggest that you consider your your words as it's not the other party here calling you any names.
You kinda did the same to me
Cheers
Click to expand...
Click to collapse
OKI DOKI

Garrett_PL said:
Relax, and see above.
Click to expand...
Click to collapse
Ok, I don't see where it says : xseroboy.
If you show me a thread where it says that he create this, I'll thank him too.
And another thing. THE ARE ALL THE INSTRUCTION YOU/ALL NEED.
Just flash it.
No need for editing anything else, this was flashed by me on my own HTC ONE M8 by flashing it without any problems.

Thank you thank you thank you thank you thank you....

Can someone extract the stock theme for Axon 7?

I've got a EU/UK version (A2017G) of Axon 7 which does not come with the stock theme that US customers are getting. I was wondering if anyone could extract the theme for us to install...

igoforthebest said:
I've got a EU/UK version (A2017G) of Axon 7 which does not come with the stock theme that US customers are getting. I was wondering if anyone could extract the theme for us to install...
Click to expand...
Click to collapse
Here you go
https://www.mediafire.com/download/fcrwy0yxpj4r97k
Edit : You mind stopping by this thread and run the command line from 2nd post? Need to see if the European variant use the same or different finger print hardware, thanks
http://forum.xda-developers.com/axon-7/how-to/a2017-cyanogenmod-development-discussion-t3447971

Thanks for that!!
Noob question... How do I install it? I thought they'd be apks but its a zip file....
Will run the command and post in that thread.
cheers
DrakenFX said:
Here you go
https://www.mediafire.com/download/fcrwy0yxpj4r97k
Edit : You mind stopping by this thread and run the command line from 2nd post?
Click to expand...
Click to collapse

igoforthebest said:
Thanks for that!!
Noob question... How do I install it? I thought they'd be apks but its a zip file....
Will run the command and post in that thread.
cheers
Click to expand...
Click to collapse
DO IT AT YOUR OWN RISK
SYSTEM BACKUP REQUIRE IF SOMETHING GOES WRONG
----------------------------------------------------------------------​- Move the THEME folder to system > media and change the THEME and THEMEINFO folder attibutes to 755 using your File Explorer (i 'm using Solid Explorer)
- Change the ZIP files attributes to 644 same for the rest of the files inside THEMEINFO folder
- REBOOT

Thanks once again...
I couldn't find the system folder. I guess I have to root it first.
Will try it once I root my phone.
DrakenFX said:
DO IT AT YOUR OWN RISK​
Click to expand...
Click to collapse

igoforthebest said:
Thanks once again...
I couldn't find the system folder. I guess I have to root it first.
Will try it once I root my phone.
Click to expand...
Click to collapse
If you are not rooted you CAN'T install the themes, so yeah need root and file explorer with root access

can someone reupload it???? please. thanks in advance

[GUIDE]a6020l36 Official Lenovo Andoid 6.0.1 (S155) for others a6020

Hello all a6020a46 users like me.
I have here a way to update the phone to S155, the official Lenovo update for Android M (6.0.1), which is only released in some countries in South America. Although I'm on Brazil, my version is not the a6020l36, but the a6020a46.
It's all pretty simple to do and you can do from any ROM, but I recommend that you be on the last available stock (I made it from AEX 4.1 and had no problems). Everything will be done from a backup made by TWRP
Tutorial:
1- Download the backup here: Android File Host
Or here: MediaFire
2- Unzip somewhere and copy to root of any storage.
p.s. If you have any saved updates, copy the TWRP folder from your mobile phone to somewhere on your PC and delete it before copying TWRP from the update.
3- Enter Recovery mode and make a Full-Wipe (Be careful not to delete the partition where the backup is saved).
4- Go Restore and select the update (1970-06-18--19-03-18 ...) and select ONLY Boot and System. Deselect all and select Boot and System only.
SELECT ONLY BOOT AND SYSTEM!!!!
5- System reboot.
p.s. If the phone takes too long to start, remove the battery for some time and try again, I had to do this.
I hope it works for everyone as it worked for me. It had few changes in the interface, but had many bugs solved. I recommend to test and see for yourself.
None of this would be possible if Aleph Scalioni had not backed up the update for us.
So, thank you very much Aleph Scalioni :highfive:
Forgive me for any mistake

The backup (twrp) work with 6020a40 il have tested but only language brazil, portugues and english.
Possible to have a version with all language ?
Sorry for my bad english i'm french

puntoflo said:
The backup (twrp) work with 6020a40 il have tested but only language brazil, portugues and english.
Possible to have a version with all language ?
Sorry for my bad english i'm french
Click to expand...
Click to collapse
Probably not. It is available only in Portuguese, Spanish and English.
Since it was only launched for countries with these languages, and English for being universal (?).

Why lenovo update only a new version for brazil ?
This version work with european models, just ad language and all is good with ...vibe k5

This update is for a6020a46 or A6020I36, in other thread So they say??

Does this work with a6020a40 720p 2gb variant ?

kykemejia said:
This update is for a6020a46 or A6020I36, in other thread So they say??
Click to expand...
Click to collapse
[email protected] said:
Does this work with a6020a40 720p 2gb variant ?
Click to expand...
Click to collapse
It works on Whirlpool refrigerators also...

nlooooo said:
It works on Whirlpool refrigerators also...
Click to expand...
Click to collapse
What does that mean...?

[email protected] said:
What does that mean...?
Click to expand...
Click to collapse
That means try and see...

nlooooo said:
It works on Whirlpool refrigerators also...
Click to expand...
Click to collapse
And also on my car, sound machine, etc.
Speaking in seriously is only a doubt, becouse into folder is this name:
1970-06-18--19-03-18_A6020l36_S155_170212_LAS

[email protected] said:
Does this work with a6020a40 720p 2gb variant ?
Click to expand...
Click to collapse
Yes yes yes it.s my phone too, but all language it's not present
When you select backup twrp, select all but firmware, reboot phone and wait, if your phone not boot ...open batterie and reboot and all is good.

Volte is available here?

Does this method works on a6020a46 3GB variant???
MaxPresi said:
Hello all a6020a46 users like me.
I have here a way to update the phone to S155, the official Lenovo update for Android M (6.0.1), which is only released in some countries in South America. Although I'm on Brazil, my version is not the a6020l36, but the a6020a46.
It's all pretty simple to do and you can do from any ROM, but I recommend that you be on the last available stock (I made it from AEX 4.1 and had no problems). Everything will be done from a backup made by TWRP
Tutorial:
1- Download the backup here: Android File Host
Or here: MediaFire
2- Unzip somewhere and copy to root of any storage.
p.s. If you have any saved updates, copy the TWRP folder from your mobile phone to somewhere on your PC and delete it before copying TWRP from the update.
3- Enter Recovery mode and make a Full-Wipe (Be careful not to delete the partition where the backup is saved).
4- Go Restore and select the update (1970-06-18--19-03-18 ...) and select ONLY Boot and System. Deselect all and select Boot and System only.
SELECT ONLY BOOT AND SYSTEM!!!!
5- System reboot.
p.s. If the phone takes too long to start, remove the battery for some time and try again, I had to do this.
I hope it works for everyone as it worked for me. It had few changes in the interface, but had many bugs solved. I recommend to test and see for yourself.
None of this would be possible if Aleph Scalioni had not backed up the update for us.
So, thank you very much Aleph Scalioni :highfive:
Forgive me for any mistake
Click to expand...
Click to collapse
I think your 2nd step is wrong we have to unzip it in the TWRP folder which is under sdcard1 (or sdcard0).....

aakashacjarjee said:
Volte is available here?
Click to expand...
Click to collapse
Dhruv7508 said:
Does this method works on a6020a46 3GB variant???
Sent from my K5 Plus using XDA Labs
Click to expand...
Click to collapse
I don't know and I have no way to test. If you want to test, tell me if it works.
I think your 2nd step is wrong we have to unzip it in the TWRP folder which is under sdcard1 (or sdcard0).....
Sent from my K5 Plus using XDA Labs
Click to expand...
Click to collapse
No, inside the compressed file is the TWRP folder. It should be placed directly on the root of internal or external storage. Putting it inside the TWRP folder you will get TWRP/TWRP/Backup/... and TWRP will not recognize it.

MaxPresi said:
No, inside the compressed file is the TWRP folder. It should be placed directly on the root of internal or external storage. Putting it inside the TWRP folder you will get TWRP/TWRP/Backup/... and TWRP will not recognize it.
Click to expand...
Click to collapse
Ok thanks...

I unzip , and copy it to sdcard and internal storage.But when go to TWRP , in tab restore , i cant see anythings. Help me!!

RealEmo said:
I unzip , and copy it to sdcard and internal storage.But when go to TWRP , in tab restore , i cant see anythings. Help me!!
Click to expand...
Click to collapse
You need to rename the folder inside the backup to match your phone "serial" (make other backup and copy the code) , so twrp can see the backup.
If this works hit that thanks button:good:
@MaxPresi I think you forgot to mention that this ROM doesn't support VoLTE..

1 . Create a minimal backup
2. Replace the files on your backup (the final folder, where the individual files are) with the files from backup you've downloaded
3. Install ONLY system and boot [installing firmware will result in error]

---------- Post added at 12:39 PM ---------- Previous post was at 12:33 PM ----------
Dhruv7508 said:
You need to rename the folder inside the backup to match your phone "serial" (make other backup and copy the code) , so twrp can see the backup
---------- Post added at 05:38 PM ---------- Previous post was at 05:36 PM ----------
@MaxPresi I think you forgot to mention that this ROM doesn't support VoLTE..
Click to expand...
Click to collapse
Yes, followed this indication and worked for me. :good::good:

Dhruv7508 said:
You need to rename the folder inside the backup to match your phone "serial" (make other backup and copy the code) , so twrp can see the backup
---------- Post added at 05:38 PM ---------- Previous post was at 05:36 PM ----------
@MaxPresi I think you forgot to mention that this ROM doesn't support VoLTE..
Click to expand...
Click to collapse
Its work!!! Thanks so much, i hope k5 devs can make this is a fully and stable rom for all k5 varians.
P/s in a6020 a40 Dolby Atmos has stopped.

FlashTool Devices Update

Just got G82XX support for Flashtool. use this u can flash rom.
View attachment G82XX.rar

anyway to get this for xperia xa1 (G3**) too?

how to add it to my flashtool
IcemanSu said:
Just got G82XX support for Flashtool. use this u can flash rom.
View attachment 4138911
Click to expand...
Click to collapse
Please teach me ... i dont know how add this file to my current flashtool ?
Please teach me ... i dont know how add this file to my current flashtool ?????

XuanDinh said:
Please teach me ... i dont know how add this file to my current flashtool ?
Please teach me ... i dont know how add this file to my current flashtool ?????
Click to expand...
Click to collapse
You can add folder to. C > user >username>.flashtool>device

Flashtool auto delete it
Same problem with me here! After copy to devices folder but when run flashtool delete new device automatically
Please help!

taolao.pw said:
Same problem with me here! After copy to devices folder but when run flashtool delete new device automatically
Please help!
Click to expand...
Click to collapse
Update flashtool, and put this folder into c://(username)/.Flashtool/device's

root
how do I get root with this tool?

Ice, where exactly did you get the file. I have been trying for weeks to get Androxyde to add support (reached out to him by twitter)
Is there a forum or something? or did you figure it out yourself? if so how/where? I may need to know for future reference.
AND MANY THANKS. I got my fingerprint reader back!
IcemanSu said:
Just got G82XX support for Flashtool. use this u can flash rom.
View attachment 4138911
Click to expand...
Click to collapse

inteltecra1700 said:
Ice, where exactly did you get the file. I have been trying for weeks to get Androxyde to add support (reached out to him by twitter)
Is there a forum or something? or did you figure it out yourself? if so how/where? I may need to know for future reference.
AND MANY THANKS. I got my fingerprint reader back!
Click to expand...
Click to collapse
From a chinese forum http://www.mnmingx.com/forum.php

You Sir, are a hero for finding this. and the guys who patched it are legends. Many thanks!
IcemanSu said:
From a chinese forum http://www.mnmingx.com/forum.php
Click to expand...
Click to collapse

After downloading, extract it, you will now have a “folder G82XX“.
Now open latest version of flashtol which you have downloaded. Once all scripts are loaded, you will see: Loaded 94 devices.
Now copy the “folder G82XX” to %userprofile%\.flashTool\devices (copy this to “RUN”).
Now open flashtool, click: Device – Manage – Import, you will see: Loaded 95 devices.
---------- Post added at 08:57 AM ---------- Previous post was at 08:54 AM ----------
After downloading, extract it, you will now have a “folder G82XX“.
Now open latest version of flashtol which you have downloaded. Once all scripts are loaded, you will see: Loaded 94 devices.
Now copy the “folder G82XX” to %userprofile%\.flashTool\devices (copy this to “RUN”).
Now open flashtool, click: Device – Manage – Import, you will see: Loaded 95 devices.

Anyway to add XZ premium G8142?

wow :bối rối:

I am working on new flasher which will support new sony flashing protocol, hope soon...
Edit:
As a promised I am finished it! Here you go https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426 , happy flashing!

munjeni said:
I am working on new flasher which will support new sony flashing protocol, hope soon...
Edit:
As a promised I am finished it! Here you go https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426 , happy flashing!
Click to expand...
Click to collapse
"You probably don't/didn't own a Mediatek-based Xperia device, flashing them without the FSC scripts will result in a failed flash and a hard bricked phone in 99% of cases, and the other 1% are the lucky ones where the flashing fails but the phone is left in a somewhat recoverable state..."
I wonder how you respond to this comment

carefen said:
"You probably don't/didn't own a Mediatek-based Xperia device, flashing them without the FSC scripts will result in a failed flash and a hard bricked phone in 99% of cases, and the other 1% are the lucky ones where the flashing fails but the phone is left in a somewhat recoverable state..."
I wonder how you respond to this comment
Click to expand...
Click to collapse
My respond to it https://forum.xda-developers.com/xperia-m5/help/help-comfirming-related-to-flashing-t3625133 , somebody need to confirm! On booth tools I newer used any fsc script and nobody bricked its phone with newflasher or xflasher, but allso nobody tried to flash it on mediatek based phone, so somebody need to try and confirm it. Again I continue to believe that fsc is uneeded at all! Please read all conversations between me and Androxyde to understand why I mean all this! I'm still continue to believe that flashtool had an bug which caused hard bricks on mediatek devices (again need somebody try my tools and confirm negative)

HHSM said:
After downloading, extract it, you will now have a “folder G82XX“.
Now open latest version of flashtol which you have downloaded. Once all scripts are loaded, you will see: Loaded 94 devices.
Now copy the “folder G82XX” to %userprofile%\.flashTool\devices (copy this to “RUN”).
Now open flashtool, click: Device – Manage – Import, you will see: Loaded 95 devices.
---------- Post added at 08:57 AM ---------- Previous post was at 08:54 AM ----------
After downloading, extract it, you will now have a “folder G82XX“.
Now open latest version of flashtol which you have downloaded. Once all scripts are loaded, you will see: Loaded 94 devices.
Now copy the “folder G82XX” to %userprofile%\.flashTool\devices (copy this to “RUN”).
Now open flashtool, click: Device – Manage – Import, you will see: Loaded 95 devices.
Click to expand...
Click to collapse
What do you mean by "Copy this to RUN" ?
Also, I see 99 devices (v0.9.23.2) and the folder G82XX already exists, although it has 2 files in it instead of 3...

DeNuNietNooitNiet said:
What do you mean by "Copy this to RUN" ?
Also, I see 99 devices (v0.9.23.2) and the folder G82XX already exists, although it has 2 files in it instead of 3...
Click to expand...
Click to collapse
Delete that folder add the new folder then click export and then import the new folder and tadaa worked for me
Verstuurd vanaf mijn G8231 met Tapatalk

munjeni said:
I am working on new flasher which will support new sony flashing protocol, hope soon...
Edit:
As a promised I am finished it! Here you go https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426 , happy flashing!
Click to expand...
Click to collapse
Doesnt work with XZs it seems