Database Users

UNOFFICIAL CM 12.1 ROM FOR ALL US VARIANTS

Download Link - CM 12.1/Android 5.1.1:
Update CM 12..1 05/01 -
AndroidFileHost
Instructions:
Flash ROM(Link above)
BaNkS GAPPS - GAPPS
Donations
Please donate to keep this project alive!! It costs to maintain the hardware, Internet for the frequent updates and various fixes
Change log for 04/22 Build:
Android 5.1.1_r1
Stable Camera
USB OTG Update - This will make OTG super stable - This will be part of next release
Reboot Fix
CM Code Catch-up
Bluetooth updates
Memory optimisation
New CM SMart Dialer
Return of Silent mode
Silent mode toggle
CM File Manager update - I am not sure if anyone uses this
MMS Updates
Time to switch back to nuplayer
Things which are broken:
You tell me
*NewCM team have introduced couple of new apps which are included in this build. Check the build for the surprise
Ignore the titles of the download files, I have to fix those
XDA:DevDB Information
Lolli POP, ROM for the LG G4
Contributors
supy99, matrixzone
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-05-07
Last Updated 2015-05-07

Reserved

Also Reserved

What is this rom based off of? Since the U.S. Variants aren't released yet, is this a port from the G3? Or from a Korean variant?

How do you flash when you can't root or install twrp?

No kernel source and placeholders are not allowed.
Provide GPL-compliant kernel source and something to actually download and flash, and the thread will be opened.

[Port] [AICP] [Stable] [5.1] SM-T800

This ROM is based on Nightly version AICP but its Stable for daily use.
FEATURES:
All AICP features
Lollipop features (customized by AICP)
BUGS:
Unresized BootAnimation [on the center] (I did this on purpose, if you want you can change.)
Sees there is a sim card in tablet but there isn't. [Says "NO SERVICE"] (You can disable with " Permanent GSM solution down below)
Little bugs [does not affects daily use]
Can't install GAAPS because system partition is small (FIXED IN VERSION 2 ! - FIXED IN V2 !)
_-----------------------------------------------_
Permanent GSM solution:
1) not avaliable instructions
2) when way to disable cellular its entered ti here
INSTALLATION:
1. Install TWRP Recovery [if you haven't]
2. Boot into recovery mode
3. Wipe "System,Data,Cache,Dalvik Cache"
4. Flash ROM file from install zip section
Note: If you will flash GAAPS don't reboot after flashing system, flash GAAPS before rebooting.
Note2: Download v2 if you need flashing GAAPS.
XDA:DevDB Information
AICP SM-T800, ROM for the Samsung Galaxy Tab S
Contributors
romngenie
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: TWRP
Based On: AICP
Version Information
Status: Stable
Created 2016-06-25
Last Updated 2016-06-25​

hello, after searching I've found out that AICP stand for Android Ice Cold Project. May I ask if it look like Cyanogenmod or the AOSP ? first time I hear about it...
and just to know, why isn't it on the list of : http://dwnld.aicp-rom.com/?device=all&type=all ? for the chagallwifi T-800 ?

zigonneux said:
hello, after searching I've found out that AICP stand for Android Ice Cold Project. May I ask if it look like Cyanogenmod or the AOSP ? first time I hear about it...
and just to know, why isn't it on the list of : http://dwnld.aicp-rom.com/?device=all&type=all ? for the chagallwifi T-800 ?
Click to expand...
Click to collapse
Because i just created a XDA project. I cant contacted to AICP
Sent from my Asus ZenFone 2 Laser (ZE550KL) using XDA Labs

nice rom but some errors: can't check for update. Can't install any gapps because lack of space in the system file. Very fast rom , but can't test anything else.

zigonneux said:
nice rom but some errors: can't check for update. Can't install any gapps because lack of space in the system file. Very fast rom , but can't test anything else.
Click to expand...
Click to collapse
System partition is 300-450 MB i dont know why you can't install GAAPS (Fixed in V2 of ROM)
Can't check for update because its unofficial and no more updated . (except bug fixes)
Thanks for installing.

zigonneux said:
nice rom but some errors: can't check for update. Can't install any gapps because lack of space in the system file. Very fast rom , but can't test anything else.
Click to expand...
Click to collapse
YOU CAN INSTALL GAAPS LIKE THIS: (GAAPS FIXED IN V2 - TRY V2 WITHOUT ANY "occupation")
1. Download and install V2 of the ROM.
2. Install Gaaps.zip (install pico)

download says: Uploaded: 2016-Jul-19 , so I guess that the Fixed file is not there yet. I'll wait for the Fix and test for the fun of it... post the link when the fixed file is ready. I'm too lazy to deal with the Solution : decompress and recompress etc.

zigonneux said:
download says: Uploaded: 2016-Jul-19 , so I guess that the Fixed file is not there yet. I'll wait for the Fix and test for the fun of it... post the link when the fixed file is ready. I'm too lazy to deal with the Solution : decompress and recompress etc.
Click to expand...
Click to collapse
GAAPS is fixed in V2 version.
http://forum.xda-developers.com/devdb/project/dl/?id=19411
there is V2 Link.
You dont need uncompress and other techniques for this. Just download V2 and your GAAPS will fixed.
And i know i dont update this ROM except bug fixes.
SM-T800 cihazımdan Tapatalk kullanılarak gönderildi

[ROM][OFFICIAL] NucleaRom+Radioactive kernel [ROOTLESS OMS7] Android 7.1_r25

/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM/KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point your finger at me for messing up your device, I will laugh at you.
* BOOM! goes the dynamite
*/
Hi XDA community, we are proud to present our vision of LineageOS with features that we think are useful. Hope you enjoy our builds as much as we do.
The main goal of Nuclear Team is to provide a clean and fast ROM with nice and useful features.
[ ROM / KERNEL ] [ NOUGAT ] >< [ 7.1.1_r25] NucleaRom >< [ V3.2.5]
//2017-03-25//
By ® NuclearTeam ®
# Features:
• Unified for both devices OP3 and OP3T in the same zip
• Based on LineageOs 14.1
• Android version 7.1.1_r25
• Custom kernel included (Radioactive kernel)
• Nuclear Settings
• Customizable status bar (clock position, date, network indicators, battery style...)
• Gestures Anywhere
• Switch To Hide SuperSu from Status Bar
• Network traffic indicator
• Three finger swipe to screenshot
• Show cpu info
• Dt2s everywhere on lockscreen
• Options to modify dash board (number of columns... Etc)
• Option to disable warning color on low battery
• Full oms7 support (use substratum to theme the rom)
• Omniswitch
• Enhanced dialer with smart call feature
• All LineageOS goodies
•
HOW TO BUG REPORT:
-If you have a major bug to report that has not been reported already, and is not a known issue with CM,
please take the following steps to report it to us. It will save you time, as well as us.
-Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
-After downloading the Catlog app, go to the app settings, and change the log level to Debug.
-Clear all previous logs and take the exact steps to produce the error you are receiving.
-As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
-Copy and paste the entire log either to Hastebin or Pastebin
-Save the log, and copy and paste the link into the forum with a brief description of the error.
-You can also open trouble tickets on our website for bugs.
THINGS THAT ARE NOT SUPPORTED:
if you flash any mod or whatever besides supersu please don't subbmit any bug report
# How to install:
First install: If you come from another rom or another Android version
× Make a nandroid backup (optional but always recommended)
× Download rom
× Download 7.1 arm64 Gapps
× Wipe system,data,cache,dalvik
× Flash ROM
× Flash GApps (optional)
× Flash SuperSU or LineageOS su addon for root(optional)
× Reboot
Updating:
× Flash ROM
× Reboot
Have fun....
Enjoy!
CHANGELOG
3.0.4
Initial release
3.0.6
Synced with LineageOS source
Added various options for customize dash board
Compiled with snapdragon clang and ubernaro toolchain.
3.0.7
Synced with LineageOS source
Kernel updated with oos n source
Switch to LineageOS official device tree and vendor
3.0.8
Synced with LineageOS source
Kernel updated with latest LineageOS commits
3.0.9
Synced with LineageOS source
Kernel updated with latest LineageOS commits
Added enhanced dialer and omniswitch
3.1.0
Synced with LineageOS source
Kernel updated to latest version
3.1.1
Synced with LineageOS source
Kernel updated to latest version
Reorganized Nuclear tweaks
3.1.5
Synced with LineageOS source
Kernel updated to latest version
Reorganization of Nuclear tweaks again lol
3.1.6
Synced with LineageOS source
Kernel updated to latest version
3.1.8
Synced with LineageOS source
March security patch, 7.1.1 blobs and more
Kernel updated to latest version
3.2.0
Synced with LineageOS source
Kernel updated to latest version
Added Rootless Oms7 support
3.2.3
Synced with LineageOS source
Kernel updated to latest version
Rom and kernel compiled with UberTC 4.9.4 and snapdragon llvm clang
Fixed uncompatibility with multirom
3.2.5
Synced with LineageOS source
Kernel updated to latest version
Tweaked for better battery life without losing performance
Special thanks to:
LineageOS
Lord Boeffla
Temasek
Ak
OrdenKrieger
ResurrectionRemix
XDA
Flar2
Grarak
Koenkk
nvertigo
Nuclear Team & testers
And a very special thanks to TugaPower
Anyone I might have forgotten (please let me know)
Who are NuclearTeam??
Main devs are @Moludo, @lozo2010, @Ordenkrieger and @acuicultor is the kernel Dev.
If you want to buy us a beer/coffee you can donate Here all donations will serve to improve the rom.
Thanks to all donors!!!!
Please when do a donation tell your xda nickname in paypal message so i can give you proper credits here. Thanks.
XDA:DevDB Information
NucleaRom, ROM for the OnePlus 3
Contributors
acuicultor, Acuicultor, moludo, Nuclear Team
Source Code: http://github.com/OneRomOne-N
ROM OS Version: 7.x Nougat
ROM Firmware Required: OOS 4.1 Nougat firmware
Based On: LineageOS 14.1
Version Information
Status: Stable
Current Stable Version: 3.2.3
Created 2017-02-25
Last Updated 2017-03-25

New build up!!
Download link and changelog in op.
Enjoy!!!
Sent from my Nuclear OnePlus3T

Hey nice to see this....I was a big fan of NucleaRom back in the long ago days of M.....All the best man.
Suerte!

This is one smooooooth ROM.
Sent from my ONEPLUS A3003 using XDA-Developers Legacy app

Awesome rom thanks a lot man

New build up!!
Download link and changelog in op.
Enjoy!!!!
Sent from my Nuclear OnePlus3T

hi, I happen to someone who you can not see the memory stick via OTG?

Rai73 said:
hi, I happen to someone who you can not see the memory stick via OTG?
Click to expand...
Click to collapse
Sorry but can't test i don't have otg stick yet.
Sent from my Nuclear OnePlus3T

I got error 7 on TWRP. Which fw should I be on?

Hakim Farouk said:
I got error 7 on TWRP. Which fw should I be on?
Click to expand...
Click to collapse
4.0.3 or OB12

New build up!!
Download link and changelog in op.
Note that you need open beta 7.1.1 firmware to flash the rom.
Enjoy!!!!
Sent from my Nuclear OnePlus3T

@acuicultor whether the choice of color SIM cards has been fixed?

Rapoooo said:
@acuicultor whether the choice of color SIM cards has been fixed?
Click to expand...
Click to collapse
Yes its fixed time ago.
Sent from my Nuclear OnePlus3T

Error 7 with latest update v3.1.8 beta 1634

@loyn007 to install on a purely because it works with ob12

What does it mean? I have to put back the original ROM and redo everything from 'start?

@loyn007 I mean that the latest version works with the https://www.androidfilehost.com/?fid=817550096634750069

All right!!! Thank you

@acuicultor or you can have a different kernel than the one that is in the system? I used to install another was bootlop

Rapoooo said:
@acuicultor or you can have a different kernel than the one that is in the system? I used to install another was bootlop
Click to expand...
Click to collapse
You can flash what you want as long is compatible with LOS base but if you flash mods or other kernels you will not have support from me.
Sent from my Nuclear OnePlus3T

[7.1.2][p600][LOS-based][ROM][OMS]Mackay ROM

A few years ago, I have been building Mackay ROM, based on CyanogenMod for a number of devices. Due to being busy at work, I have stopped with that. I recently picked it up with again with a Mackay ROM based on LineageOS.
It is actually LineageOS, with a few extras that I always miss:
-SU build into the ROM
-No hash sign when using SU
-Network traffic speed option for statusbar
-OMS Substratum theming
-OmniClock in stead of Lineage Desk Clock
The bootanimation is made by my brother. It is the family coat of arms of the Scottish Mackay clan to which my family is linked.
I try to build this ROM on a weekly basis, but it mainly depends on when interesting features are available/merged
Download:
AndroidFileHost
Installation:
-Make sure you have recent TWRP installed
-Make sure you have LL bootloader
-gapps can only be flashed on clean installs (I use pico 7.1 arm64 opengapps myself - opengapps.org)
-clean install (factory reset) if coming from another ROM, dirty flash if updating
I am open to suggestions for additions, but I prefer a clean ROM, just some basic extras over stock LineageOS has always been my approach for Mackay ROMs.
Credits:
This ROM would never have been possible without the hard work of the exynos5420 team and ZakooZ in particular for bringing LineageOS to the p600/n1awifi and the other LineageOS developers.
XDA:DevDB Information
Mackay ROM, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
kasper_h
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Firmware Required: LL bootloader
Based On: LineageOS
Version Information
Status: Testing
Created 2017-05-05
Last Updated 2017-05-05

Reserved

Hey, thanks for the development. I've been using this for the past several days, and encounter no major problems so far, it's based on Lineage afterall. Substratum theming works too, I've installed several.
I have a question though: since this is 7.1.2, are you sure you're using pico 7.1 arm64 opengapps? From the Lineage thread, it seems that opengapps (at least on several days ago) cannot be flashed on 7.1.2, as per this post: https://forum.xda-developers.com/ga...ial-builds-t3457898/post71984181#post71984181
Basically due to changes in 7.1.2, Gapps for 7.1.1 or 7.0 doesn't work on 7.1.2 so a modded version needs to be used. Of course this is the one I flashed so all works fine.
Probably the only thing I'd request is that instead of using SuperSU, it's better to use Magisk, if only because it can hide itself from apps that don't like root.

Thanks for the reply. Indeed, there some to be an issue for latest opengapps. I guess/hope they'll fix this soon.
I've not tried Magisk myself and use the buildin su. I don't use apps that have a problem with root, but I'll add the recommendation

Thanks for the new rom, but you put your thraed in the wrong category. Can you move it to android development, please?

[ROM][SANTONI][10]LuisROM Android 10 based on crDroid V6.x

My LuisROM based on cdDroid V6.x for Xiaomi Redmi 4x (santoni)​
Code:
*** Disclamer
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This is my personal custom rom. LuisROM based on the crDroid, LineageOS and other...
This is a ROM that works on Xiaomi Redmi 4x (santoni) snapdrgon only! This ROM comes with a highly-customized kernel, as well as some other very custom modifications.
I will NOT provide support if you install a custom kernel!
Changelogs: http://luis-builds.de/downloads/lineageos/cr/Xiaomi_Redmi_4X_(santoni)/changelog_santoni.txt
Introduction
Hello Friends!
I had troubles to find current builds for my devices so I decided to make regular builds for my devices. When my friends told me about similar problems, I extended the builds to include their devices as well. So these builds were and are mainly for my friends and me, but I finally decided to provide them also for public download.
My ROMs
My LuisROM an awesome combination of performance, customization, power and the most new features, brought directly to your device. The LuisROM build server generates automaticly every 2nd days new builds directly from the sources.
Notice
Sometimes I get a lot of help or feature requests from users of my LuisROMs. My dog Luis and I try to fulfill most of the wishes, but that is not always possible. I do that as a little hobby and Luis does not always want to build ROMs . Please understand if I can not always answer directly.
ROM features:
Based on the latest cdDroid V6.x (Android 10), LineageOS and AOSP sources
Latest security patches and sources
OTA Updater
Compatible with EX Kernel Manager
Many other misc. performance and stability improvements under the hood
Kernel: Linux 3.18.x Kernel with many mods other devs and me (thanks for your incredible work!)
Removed lots of excessive bloat (improves security and performance)
Improved stability (several bugs not listed here have been fixed)
Boeffla Wakelock blocker driver V1.1.0
More I/O-Schedulers (fiops, sio, zen, maple)
Optimized for performance and battery life
Compatible with systemless root (recommend Magisk 20.x !!!)
Many other misc. improvements not listed here
Installation instructions:
Pre-installation:
OrangeFox Recovery of course (download here)
Tested with "V11.0.2.0.NAMMIXM" firmware. (download here)
Magisk 20.x and above (Link) can also be used just make sure you flash it after a first successful boot (after passed setup screen)
First time installation:
Unlock your bootloader
Install lates MIUI firmware (tested V11.0.2.0.NAMMIXM)
Flash recovery zip (TWRP)
Flash my latest LuisROM (download here)
Optional: Flash Open GApps and Magisk 20.x and above
Reboot and enjoy
OTA App update installation (auto):
Go to crDroid > About cdDroid > Updates
Press reload button (right corner)
Select download on the new build list
After download select update/flash new build
Optional: Installed gapps and magisk will be moved into new system automaticaly !
TWRP update installation (manual):
Download latest LuisROM build (download here)
Boot into Recovery TWRP
Flash my updated LuisROM (download here)
Reboot and enjoy
Download
Latest builds: (http://luis-builds.de/downloads/lineageos/cr/Xiaomi_Redmi_4X_(santoni)/)
Latest MIUI firmware: (download)
My other devices/ROMs: (http://luis-builds.de/downloads/lineageos/)
Download OpenGapps: (http://opengapps.org)
Flash latest OrangeFox Recovery: (download here)
Donate for my dog Luis, he is looking forward to an extra bone:
https://bw2.link/LuisDonation
Changelog
Developer: http://luis-builds.de/downloads/lineageos/cr/Xiaomi_Redmi_4X_(santoni)/changelog_santoni.txt
Known Issus
..
Telegram group:
https://t.me/rr_luisrom
Thanks To/Credits
Special thanks to Teams:
LineageOS team: https://www.lineageos.org
crDroid Team: https://crdroid.net/
OMNI team https://omnirom.org/about/
SLIMROMS https://slimroms.org/#/about
topjohnwu (Magisk) https://forum.xda-developers.com/apps/magisk
Thanks to the best devs on earth:
LuK1337 (https://forum.xda-developers.com/member.php?u=5075128)
PeterCxy (https://forum.xda-developers.com/member.php?u=5351691)
francokernel (https://forum.xda-developers.com/member.php?u=3292224)
sultanxda (https://forum.xda-developers.com/member.php?u=4800121)
flar2 (https://forum.xda-developers.com/member.php?u=4684315)
nathanchance (https://forum.xda-developers.com/member.php?u=6842057)
zx2c4 for the wireguard vpn ROM Integration (https://forum.xda-developers.com/android/development/wireguard-rom-integration-t3711635)
phhusson for some blobs (https://github.com/phhusson)
and of course to all the supporters.
Thanks for the Sources/Blobs/Tweaks
ProtoDump (https://github.com/LineageOS)
Omnirom (https://github.com/omnirom)
TheMuppets (https://github.com/TheMuppets)
ryan-andri (https://github.com/ryan-andri)
AliHasan7671 (https://github.com/AliHasan7671)
zeelog (https://github.com/zeelog)
My Sources/Blobs/Tweaks
DEVICE (https://github.com/FraEgg/android_device_xiaomi_santoni_ra)
KERNEL (https://github.com/FraEgg/android_kernel_xiaomi_msm8937)
XDA:DevDB Information
[ROM][SANTONI][10]LuisROM Android 10 based on crDroid V6.x, ROM for the Xiaomi Redmi 4X
Contributors
8224Freak
Source Code: https://github.com/FraEgg
ROM OS Version: Android 10
ROM Firmware Required: V11.0.2.0.NAMMIXM
Based On: LineageOS, crDroid, AOSP
Version Information
Status: Beta
Beta Release Date: 2020-03-24
Created 2020-03-24
Last Updated 2020-03-24

Reserved

Great rom. Only one bug, the speaker is silence unless the headphone is plugged.
crDroidAndroid-10.0-20200321-santoni-v6.4-LuisROM
is normal.

Stuck at fastboot...
Hello,
I've a little problem. I've used LuisROM RR for a long time. Now I want to switch to LuisROM CR.
I did a clean install with the newest crDroidAndroid-10.0-20200331-santoni-v6.4-LuisROM.zip, the newest FW and newest OrangeFox.
During the installation of the ROM, there was a message "Cannot mount the storage".
Now it reboots only into fastboot.
An installation with the old LuisROM RR works without a problem.
Any ideas?
Thx,
wayne
---------- Post added at 12:50 PM ---------- Previous post was at 12:38 PM ----------
OK.
The old version crDroidAndroid-10.0-20200215-santoni-v6.3-LuisROM-ota.zip works...
An the Upgrade from crDroidAndroid-10.0-20200215-santoni-v6.3-LuisROM-ota.zip to
crDroidAndroid-10.0-20200331-santoni-v6.4-LuisROM.zip didn't work, same problem, stuck at fastboot...
:crying:

Maybe you should clear the internal storge.
However, the newer roms have bugs.

@wayne5de try to install magisk after installing rom. The phone will start, but there will be no sound from the main speaker. The last working version is probably 20200319.

doopek said:
@wayne5de try to install magisk after installing rom. The phone will start, but there will be no sound from the main speaker. The last working version is probably 20200319.
Click to expand...
Click to collapse
What do you mean with "no sound". My phone rings, I can talk and hear the other person.
At the moment 20200215-santoni-v6.3-LuisROM is installed with magisk.

There have been some bug since a few versions, which results in the lack of sound from the main speaker. You don't hear ringtones or music. Calls are working correctly. If this speaker works for you, I will have to try the latest version again. This morning I tried dirty flashing and the sounds didn't work.

I also can verify that sounds does not come from the main speaker on a fresh install. Just tried it and work's from the main speaker only if headphones are plugged

In this latest version, the phone's sound does not work

@8224Freak there has been a problem with your builds for several versions.
After a dirty flash, the system boots up but there is no sound from the main speaker. The talk speaker works.
After clean flash the phone starts in fastboot mode. Installing magisk fixes startups but no sounds yet.
Logs attached after installation with recovery and already running system.
The last good is probably 20200319 or the first next.

Stuck on fastboot
When I flash and reboot my phone the phone got stuck in fastboot mode.
Please fix this issue

Thanks for rom,
crDroidAndroid-10.0-20200319-santoni-v6.4-LuisROM
but is slowly and I' reporting what doesn't work:
- for a dark colour scheme backround of phone calls is not dark
- why on upper belt is max 6 icon/shortcuts ? rest of roms usually has 8
- why system (990+149+121 +101+85 MB !) uses up 1446 MB of memory ?
- why system has up 31 aplications ? Roms has usually 22-26
- level of corrections to producer protection is very old, but from 01.10.2018 !?!?!
- system doesn't has advanced restart
When could You reparing ? I saw new version but could You cofirmed that is free of those bugs ?

Speaker not working.!?
(drive.google.com/file/d/1-svW-RFpG8YzFsan3U9iOuF0zbpHYW6E/view?usp=drivesdk) - remove brackets
(drive.google.com/file/d/1-sfP88RdHSvjs-3dx2QnLrz-WAxErQ8C/view?usp=drivesdk) also remove brackets (new member stuff, sorry)

I can't download it rom,gps does not catch well,only 3-5 satellites

Fixed: stuck on fastboot and no sound...
FYI:
These two problems are fixed: stuck on fastboot and no sound...:good:
I did a dirty flash from the old crDroidAndroid-10.0-20200215 to the newest crDroidAndroid-10.0-20200427.
Thx for your good work! :highfive:

No camera works...
With the newest update crDroidAndroid-10.0-20200504 no camera works... :crying:

wayne5de said:
With the newest update crDroidAndroid-10.0-20200504 no camera works... :crying:
Click to expand...
Click to collapse
But does the phone work well ?
Are there any other bugs?
Do you have the sound good now?
For the camera, I recommend 2 apk that I use:
https://play.google.com/store/apps/details?id=net.sourceforge.opencamera
https://play.google.com/store/apps/details?id=com.caddish_hedgehog.hedgecam2

As I said before: These two problems are fixed: stuck on fastboot and no sound...
I also use open camera, but this, the standard camera, HD-camera, ... didn't work!

After dirty flash (from build 20200429 to 20200501) my phone stuck on cr logo but after clean install everything is ok.
Same situation after dirty flash from build 20200501 to 20200504.
On 20200504 build ...... no camera (open camera, gcam) is working. Back to 20200501.