[7.1.2][p600][LOS-based][ROM][OMS]Mackay ROM - Galaxy Note 10.1 (2014 Edition) General

A few years ago, I have been building Mackay ROM, based on CyanogenMod for a number of devices. Due to being busy at work, I have stopped with that. I recently picked it up with again with a Mackay ROM based on LineageOS.
It is actually LineageOS, with a few extras that I always miss:
-SU build into the ROM
-No hash sign when using SU
-Network traffic speed option for statusbar
-OMS Substratum theming
-OmniClock in stead of Lineage Desk Clock
The bootanimation is made by my brother. It is the family coat of arms of the Scottish Mackay clan to which my family is linked.
I try to build this ROM on a weekly basis, but it mainly depends on when interesting features are available/merged
Download:
AndroidFileHost
Installation:
-Make sure you have recent TWRP installed
-Make sure you have LL bootloader
-gapps can only be flashed on clean installs (I use pico 7.1 arm64 opengapps myself - opengapps.org)
-clean install (factory reset) if coming from another ROM, dirty flash if updating
I am open to suggestions for additions, but I prefer a clean ROM, just some basic extras over stock LineageOS has always been my approach for Mackay ROMs.
Credits:
This ROM would never have been possible without the hard work of the exynos5420 team and ZakooZ in particular for bringing LineageOS to the p600/n1awifi and the other LineageOS developers.
XDA:DevDB Information
Mackay ROM, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
kasper_h
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Firmware Required: LL bootloader
Based On: LineageOS
Version Information
Status: Testing
Created 2017-05-05
Last Updated 2017-05-05

Reserved

Hey, thanks for the development. I've been using this for the past several days, and encounter no major problems so far, it's based on Lineage afterall. Substratum theming works too, I've installed several.
I have a question though: since this is 7.1.2, are you sure you're using pico 7.1 arm64 opengapps? From the Lineage thread, it seems that opengapps (at least on several days ago) cannot be flashed on 7.1.2, as per this post: https://forum.xda-developers.com/ga...ial-builds-t3457898/post71984181#post71984181
Basically due to changes in 7.1.2, Gapps for 7.1.1 or 7.0 doesn't work on 7.1.2 so a modded version needs to be used. Of course this is the one I flashed so all works fine.
Probably the only thing I'd request is that instead of using SuperSU, it's better to use Magisk, if only because it can hide itself from apps that don't like root.

Thanks for the reply. Indeed, there some to be an issue for latest opengapps. I guess/hope they'll fix this soon.
I've not tried Magisk myself and use the buildin su. I don't use apps that have a problem with root, but I'll add the recommendation

Thanks for the new rom, but you put your thraed in the wrong category. Can you move it to android development, please?

Related

UNOFFICIAL CM 12.1 ROM FOR ALL US VARIANTS

Download Link - CM 12.1/Android 5.1.1:
Update CM 12..1 05/01 -
AndroidFileHost
Instructions:
Flash ROM(Link above)
BaNkS GAPPS - GAPPS
Donations
Please donate to keep this project alive!! It costs to maintain the hardware, Internet for the frequent updates and various fixes
Change log for 04/22 Build:
Android 5.1.1_r1
Stable Camera
USB OTG Update - This will make OTG super stable - This will be part of next release
Reboot Fix
CM Code Catch-up
Bluetooth updates
Memory optimisation
New CM SMart Dialer
Return of Silent mode
Silent mode toggle
CM File Manager update - I am not sure if anyone uses this
MMS Updates
Time to switch back to nuplayer
Things which are broken:
You tell me
*NewCM team have introduced couple of new apps which are included in this build. Check the build for the surprise
Ignore the titles of the download files, I have to fix those
XDA:DevDB Information
Lolli POP, ROM for the LG G4
Contributors
supy99, matrixzone
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-05-07
Last Updated 2015-05-07
Reserved
Also Reserved
What is this rom based off of? Since the U.S. Variants aren't released yet, is this a port from the G3? Or from a Korean variant?
How do you flash when you can't root or install twrp?
No kernel source and placeholders are not allowed.
Provide GPL-compliant kernel source and something to actually download and flash, and the thread will be opened.

CM14.1 Unofficial alpha for Bullhead

Hi guys, I want to share cm14.1 for our Nexus 5X. I've compiled from CyanogenMod source. Factory Reset needed.
Bugs:​Radio not working
AudioFX crash
Problem while typing(Reboot to fix has worked for me)​
XDA:DevDB Information
CM14.1 Unofficial for the LG Nexus 5X
Contributors
mario4693
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Alpha
Created 2016-11-04
Last Updated 2016-11-04
Thanks for the work!
What's the point of this, the phone is equal to a brick with radio not working.
Radio is most important, but its just to see cm14 progress idk! I dont just randomly flash whatever rom to my phone. I need wofkjng phone that reliable. Cm has never done that for me
It's your Build or not ??? : CM 14.1 Unofficial last build Mr Yuuki 0823 : https://www.androidfilehost.com/?fid=385035244224394856
I don't think, you can try it.
mario4693 said:
I don't think, you can try it.
Click to expand...
Click to collapse
i boot at this moment oh great job SIM Card detected
yeah i'm the first guy on CyanogenMod 14.1 Bro I have flash this Rom without Gapps because Dynamic Banks 7.0xx gapps sdk 25 won't work properly but i can flash it without issue flash it after first boot
theme engine not now ??
What's work got to see here with screenshots : http://forum.xda-developers.com/nexus-5x/help/whats-favorite-rom-nougat-t3472228/page4

[7.1.2][Unofficial] Slim 7 for Lenovo P2

SlimRoms is a custom android operating system. Our main goal is to offer users a slimmed down yet feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by our public Gerrit to submit patches of any type.
Slim6 is the project name for SlimRoms based on Android 6.0.1 Marshmallow and offers the following original features:
Slim6 is still in its early stages of development so if your favourite feature is not back yet, don’t worry more will be added with later releases.
SlimLauncher
An Open source, feature filled launcher! -More fun than you can shake a stick at.
Important links:
slimroms.org - Our official website and your source for anything SlimRoms related.
Downloads - Slimify your device!
Installation instructions - Follow these steps if you want SlimRoms on your device.
FAQ - Have a question? Consider reading our FAQ first, you might find your answer there!.
Report-bugs - Found a bug? Send it our way!
Get in touch!
- You can contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Disclaimer: We are not responsible for any damages to your device.
Flashing instructions:
Coming from another ROM, OR if a CLEAN FLASH is required
1) Download the Slim7 zip file
2) Download a 7.1.2 GApps package
3) Boot into recovery (TWRP)
4) Full wipe (Dalvik Cache, Cache, System, Factory Data Reset)
5) Flash the Slim7 zip file
6) Flash GApps
7) Reboot
Download:
Mega Slim 7.1.2
Gapps
IMPORTANT - PROBLEMS/ISSUES:
If you have issues, I need logs from you (logcat, last_kmsg, dmesg) linked to on pastebin.com or hasteb.in, showing the failure, along with a clear description of the steps that I need to take to exactly reproduce the problem. Please DO NOT complain about problems and offer nothing to help fix it. You will most likely be ignored...
NO ETA REQUESTS!
XDA:DevDB Information
slimroms, ROM for the Lenovo P2
Contributors
Wzedlare
Source Code: [url]https://github.com/SlimRoms[/URL]
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Linux 3.18.31
Based On: aosp/caf
Version Information
Status: Beta
Created 2017-04-15
Last Updated 2017-04-16
# Friendly Notes:
- Which gapps should I install on this rom?
You should flash this one: https://www.androidfilehost.com/?fid=529152257862716774
- How to root?
Check Post #3
- Can I install this rom on P2c72 variant?
I think this rom can also work P2c72, I didn't try it by myself but I think it works.
- Bugs?
Same as LineageOS 14.1; Notification LED and Dev Option
You can use led with this method : https://forum.xda-developers.com/lenovo-p2/themes/lenovo-p2-rooted-custom-led-t3589859
Thanks for the great rom! Please update RR to 7.1.2 also.

[ROM][8.1.0][UNOFFICIAL] AICP-13.1[Kuntao]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LAOS) we are now LAOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or the LAOS team will if it concerns their code base. This rom isn't LAOS supported, so no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough Overview)
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
 @maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 13.1
Download link: Gdrive
Full Changelog link: http://dwnld.aicp-rom.com/
Google Apps:
(link the best one for your device, there are several variants out there right now, pico/nano gapps from opengapps.org is almost always a good choice though)
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.
Q. Does this ROM support custom kernels?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm/whatever for SDK 27.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash, and then reboot.
Using the ROM:
Q. How do I enable software buttons?
A. Go to Aicp Extras/Navigation bar, and enable it.
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I keep losing root with Magisk, how do I fix it?
A. Check this out. If that doesn't work for you, ask for help in this thread, read or ask in the Magisk thread on XDA or just re-flash Magisk!
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Oreo. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash:
(Again: Don't do it if you don't know it!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, Data and ART/Dalvik cache.
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Flash the root solution of your choice (optional).
7. Reboot your device.
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update)
Currently Supported Root Solutions:
Magisk stable
Magisk versions higher than 14.0 doesn't require flash on every dirty flash depending on the device, some devices need you to flash it every time, unless your maintainer says otherwise it should be fine
KERNEL:
The kernel in this ROM follows LAOS source with custom additions.
If you want to contribute to the AICP or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
KERNEL
ROM & Additional links:
AICP Gerrit Code Review
AICP on Github
AICP G+ community
Contributors:
subham
FireLord
Arghyac35
XDA:DevDB Information
AICP, ROM for the Lenovo P2
Contributors
saikiran001, @subham, arghyac35, FireLord
ROM OS Version: 8.1.x Oreo
Kernel: Linux 3.18.x
Version Information
Status: Stable
Current Stable Version: 13.1
Based On: LineageOS
Stable Release Date: 2018-09-13
Created 2018-09-13
Last Updated 2018-09-13​
Reserved
some screenshots
Changelog:14-09-2018 (Initial Build)
-Merge september security patch
-Kernel upstreamed to 3.18.122
-Added swipe gestures and more...
saikiran001 said:
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LAOS) we are now LAOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or the LAOS team will if it concerns their code base. This rom isn't LAOS supported, so no need to report errors/bugs to them!!
Feature list (rough Overview)
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 13.1
Download link: Gdrive
Full Changelog link: http://dwnld.aicp-rom.com/
Google Apps:
(link the best one for your device, there are several variants out there right now, pico/nano gapps from opengapps.org is almost always a good choice though)
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.
Q. Does this ROM support custom kernels?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm/whatever for SDK 27.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash, and then reboot.
Using the ROM:
Q. How do I enable software buttons?
A. Go to Aicp Extras/Navigation bar, and enable it.
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I keep losing root with Magisk, how do I fix it?
A. Check this out. If that doesn't work for you, ask for help in this thread, read or ask in the Magisk thread on XDA or just re-flash Magisk!
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Oreo. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash:
(Again: Don't do it if you don't know it!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, Data and ART/Dalvik cache.
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Flash the root solution of your choice (optional).
7. Reboot your device.
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update)
Currently Supported Root Solutions:
Magisk stable
Magisk versions higher than 14.0 doesn't require flash on every dirty flash depending on the device, some devices need you to flash it every time, unless your maintainer says otherwise it should be fine
KERNEL:
The kernel in this ROM follows LAOS source with custom additions.
If you want to contribute to the AICP or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
KERNEL
ROM & Additional links:
AICP Gerrit Code Review
AICP on Github
AICP G+ community
Contributors:
subham
FireLord
Arghyac35
ROM OS Version: 8.1.x Oreo
Kernel: Linux 3.18.x
Version Information:
Status: NIGHTLY
Release Date: 09-13-2018
XDA:DevDB Information
AICP, ROM for the Lenovo P2
Contributors
saikiran001, @subham, arghyac35, FireLord
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: stock_S251 firmware
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 13.1
Stable Release Date: 2018-09-13
Created 2018-09-13
Last Updated 2018-09-13​
Click to expand...
Click to collapse
​
Good work. Some SS please​
prahlad36 said:
Good work. Some SS please
Click to expand...
Click to collapse
Posted
Thanks for awesome rom!
Does this Rom support fp gestures?
Yeah it does...,
Bro I had flashed aosp extended and now I'm on havoc but on both Roms finger print unlock and gestures are not working. Before flashing these 2 ROMS I had accidentally wiped internal storage too and now I'm having these problem.
Before wiped my internal storage all ROMs were working fine .if I flash your ROM bro will it be okay? Or you can help me to get back these features again.
razatthakur said:
Bro I had flashed aosp extended and now I'm on havoc but on both Roms finger print unlock and gestures are not working. Before flashing these 2 ROMS I had accidentally wiped internal storage too and now I'm having these problem.
Before wiped my internal storage all ROMs were working fine .if I flash your ROM bro will it be okay? Or you can help me to get back these features again.
Click to expand...
Click to collapse
Fingerprint unlock and features are working fine in these ROMs. You simply have to encrypt your phone...via settings. Then it will work again. It's a common thing
Becoming official soon ??
suvam69 said:
Becoming official soon ??
Click to expand...
Click to collapse
After few updates, sure I'll make it official if you guys are interested to use it
Is gcam working on this one. Anyone tested it yet please post your review and version used.
anilyarki said:
Is gcam working on this one. Anyone tested it yet please post your review and version used.
Click to expand...
Click to collapse
it will work obviously
After using this rom for some time... Here's my verdict
Pros....
1. Top notch performance (smoother than aex)
2. Battery performance is also great.
3. Awesome customisation option.
4. Live display option is present here.
5. Ambient works like charm.
6. First rom to implement one plus like swipe gesture (back gesture work from bottom)
7. Android p like volume slider
Cons....
1. Face unlock is the worst u will find.
2. Missed some more lock screen clock and date style.
3. No list view animation.
4. There should be an option to change volume slider at bottom.
Rest is good, I will keep this list updated each time I discover new pros or cons.
The legendary rom is back ?
saikiran001 said:
After few updates, sure I'll make it official if you guys are interested to use it
Click to expand...
Click to collapse
yeah bro please make this ROM official that would be fantastic, I'm already using this rom thanks
Nice ROM :good: back gesture from left + right side isn't working for me only from center work.

[ROM][SANTONI][10]LuisROM Android 10 based on crDroid V6.x

My LuisROM based on cdDroid V6.x for Xiaomi Redmi 4x (santoni)​
Code:
*** Disclamer
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This is my personal custom rom. LuisROM based on the crDroid, LineageOS and other...
This is a ROM that works on Xiaomi Redmi 4x (santoni) snapdrgon only! This ROM comes with a highly-customized kernel, as well as some other very custom modifications.
I will NOT provide support if you install a custom kernel!
Changelogs: http://luis-builds.de/downloads/lineageos/cr/Xiaomi_Redmi_4X_(santoni)/changelog_santoni.txt
Introduction
Hello Friends!
I had troubles to find current builds for my devices so I decided to make regular builds for my devices. When my friends told me about similar problems, I extended the builds to include their devices as well. So these builds were and are mainly for my friends and me, but I finally decided to provide them also for public download.
My ROMs
My LuisROM an awesome combination of performance, customization, power and the most new features, brought directly to your device. The LuisROM build server generates automaticly every 2nd days new builds directly from the sources.
Notice
Sometimes I get a lot of help or feature requests from users of my LuisROMs. My dog Luis and I try to fulfill most of the wishes, but that is not always possible. I do that as a little hobby and Luis does not always want to build ROMs . Please understand if I can not always answer directly.
ROM features:
Based on the latest cdDroid V6.x (Android 10), LineageOS and AOSP sources
Latest security patches and sources
OTA Updater
Compatible with EX Kernel Manager
Many other misc. performance and stability improvements under the hood
Kernel: Linux 3.18.x Kernel with many mods other devs and me (thanks for your incredible work!)
Removed lots of excessive bloat (improves security and performance)
Improved stability (several bugs not listed here have been fixed)
Boeffla Wakelock blocker driver V1.1.0
More I/O-Schedulers (fiops, sio, zen, maple)
Optimized for performance and battery life
Compatible with systemless root (recommend Magisk 20.x !!!)
Many other misc. improvements not listed here
Installation instructions:
Pre-installation:
OrangeFox Recovery of course (download here)
Tested with "V11.0.2.0.NAMMIXM" firmware. (download here)
Magisk 20.x and above (Link) can also be used just make sure you flash it after a first successful boot (after passed setup screen)
First time installation:
Unlock your bootloader
Install lates MIUI firmware (tested V11.0.2.0.NAMMIXM)
Flash recovery zip (TWRP)
Flash my latest LuisROM (download here)
Optional: Flash Open GApps and Magisk 20.x and above
Reboot and enjoy
OTA App update installation (auto):
Go to crDroid > About cdDroid > Updates
Press reload button (right corner)
Select download on the new build list
After download select update/flash new build
Optional: Installed gapps and magisk will be moved into new system automaticaly !
TWRP update installation (manual):
Download latest LuisROM build (download here)
Boot into Recovery TWRP
Flash my updated LuisROM (download here)
Reboot and enjoy
Download
Latest builds: (http://luis-builds.de/downloads/lineageos/cr/Xiaomi_Redmi_4X_(santoni)/)
Latest MIUI firmware: (download)
My other devices/ROMs: (http://luis-builds.de/downloads/lineageos/)
Download OpenGapps: (http://opengapps.org)
Flash latest OrangeFox Recovery: (download here)
Donate for my dog Luis, he is looking forward to an extra bone:
https://bw2.link/LuisDonation
Changelog
Developer: http://luis-builds.de/downloads/lineageos/cr/Xiaomi_Redmi_4X_(santoni)/changelog_santoni.txt
Known Issus
..
Telegram group:
https://t.me/rr_luisrom
Thanks To/Credits
Special thanks to Teams:
LineageOS team: https://www.lineageos.org
crDroid Team: https://crdroid.net/
OMNI team https://omnirom.org/about/
SLIMROMS https://slimroms.org/#/about
topjohnwu (Magisk) https://forum.xda-developers.com/apps/magisk
Thanks to the best devs on earth:
LuK1337 (https://forum.xda-developers.com/member.php?u=5075128)
PeterCxy (https://forum.xda-developers.com/member.php?u=5351691)
francokernel (https://forum.xda-developers.com/member.php?u=3292224)
sultanxda (https://forum.xda-developers.com/member.php?u=4800121)
flar2 (https://forum.xda-developers.com/member.php?u=4684315)
nathanchance (https://forum.xda-developers.com/member.php?u=6842057)
zx2c4 for the wireguard vpn ROM Integration (https://forum.xda-developers.com/android/development/wireguard-rom-integration-t3711635)
phhusson for some blobs (https://github.com/phhusson)
and of course to all the supporters.
Thanks for the Sources/Blobs/Tweaks
ProtoDump (https://github.com/LineageOS)
Omnirom (https://github.com/omnirom)
TheMuppets (https://github.com/TheMuppets)
ryan-andri (https://github.com/ryan-andri)
AliHasan7671 (https://github.com/AliHasan7671)
zeelog (https://github.com/zeelog)
My Sources/Blobs/Tweaks
DEVICE (https://github.com/FraEgg/android_device_xiaomi_santoni_ra)
KERNEL (https://github.com/FraEgg/android_kernel_xiaomi_msm8937)
XDA:DevDB Information
[ROM][SANTONI][10]LuisROM Android 10 based on crDroid V6.x, ROM for the Xiaomi Redmi 4X
Contributors
8224Freak
Source Code: https://github.com/FraEgg
ROM OS Version: Android 10
ROM Firmware Required: V11.0.2.0.NAMMIXM
Based On: LineageOS, crDroid, AOSP
Version Information
Status: Beta
Beta Release Date: 2020-03-24
Created 2020-03-24
Last Updated 2020-03-24
Reserved
Great rom. Only one bug, the speaker is silence unless the headphone is plugged.
crDroidAndroid-10.0-20200321-santoni-v6.4-LuisROM
is normal.
Stuck at fastboot...
Hello,
I've a little problem. I've used LuisROM RR for a long time. Now I want to switch to LuisROM CR.
I did a clean install with the newest crDroidAndroid-10.0-20200331-santoni-v6.4-LuisROM.zip, the newest FW and newest OrangeFox.
During the installation of the ROM, there was a message "Cannot mount the storage".
Now it reboots only into fastboot.
An installation with the old LuisROM RR works without a problem.
Any ideas?
Thx,
wayne
---------- Post added at 12:50 PM ---------- Previous post was at 12:38 PM ----------
OK.
The old version crDroidAndroid-10.0-20200215-santoni-v6.3-LuisROM-ota.zip works...
An the Upgrade from crDroidAndroid-10.0-20200215-santoni-v6.3-LuisROM-ota.zip to
crDroidAndroid-10.0-20200331-santoni-v6.4-LuisROM.zip didn't work, same problem, stuck at fastboot...
:crying:
Maybe you should clear the internal storge.
However, the newer roms have bugs.
@wayne5de try to install magisk after installing rom. The phone will start, but there will be no sound from the main speaker. The last working version is probably 20200319.
doopek said:
@wayne5de try to install magisk after installing rom. The phone will start, but there will be no sound from the main speaker. The last working version is probably 20200319.
Click to expand...
Click to collapse
What do you mean with "no sound". My phone rings, I can talk and hear the other person.
At the moment 20200215-santoni-v6.3-LuisROM is installed with magisk.
There have been some bug since a few versions, which results in the lack of sound from the main speaker. You don't hear ringtones or music. Calls are working correctly. If this speaker works for you, I will have to try the latest version again. This morning I tried dirty flashing and the sounds didn't work.
I also can verify that sounds does not come from the main speaker on a fresh install. Just tried it and work's from the main speaker only if headphones are plugged
In this latest version, the phone's sound does not work
@8224Freak there has been a problem with your builds for several versions.
After a dirty flash, the system boots up but there is no sound from the main speaker. The talk speaker works.
After clean flash the phone starts in fastboot mode. Installing magisk fixes startups but no sounds yet.
Logs attached after installation with recovery and already running system.
The last good is probably 20200319 or the first next.
Stuck on fastboot
When I flash and reboot my phone the phone got stuck in fastboot mode.
Please fix this issue
Thanks for rom,
crDroidAndroid-10.0-20200319-santoni-v6.4-LuisROM
but is slowly and I' reporting what doesn't work:
- for a dark colour scheme backround of phone calls is not dark
- why on upper belt is max 6 icon/shortcuts ? rest of roms usually has 8
- why system (990+149+121 +101+85 MB !) uses up 1446 MB of memory ?
- why system has up 31 aplications ? Roms has usually 22-26
- level of corrections to producer protection is very old, but from 01.10.2018 !?!?!
- system doesn't has advanced restart
When could You reparing ? I saw new version but could You cofirmed that is free of those bugs ?
Speaker not working.!?
(drive.google.com/file/d/1-svW-RFpG8YzFsan3U9iOuF0zbpHYW6E/view?usp=drivesdk) - remove brackets
(drive.google.com/file/d/1-sfP88RdHSvjs-3dx2QnLrz-WAxErQ8C/view?usp=drivesdk) also remove brackets (new member stuff, sorry)
I can't download it rom,gps does not catch well,only 3-5 satellites
Fixed: stuck on fastboot and no sound...
FYI:
These two problems are fixed: stuck on fastboot and no sound...:good:
I did a dirty flash from the old crDroidAndroid-10.0-20200215 to the newest crDroidAndroid-10.0-20200427.
Thx for your good work! :highfive:
No camera works...
With the newest update crDroidAndroid-10.0-20200504 no camera works... :crying:
wayne5de said:
With the newest update crDroidAndroid-10.0-20200504 no camera works... :crying:
Click to expand...
Click to collapse
But does the phone work well ?
Are there any other bugs?
Do you have the sound good now?
For the camera, I recommend 2 apk that I use:
https://play.google.com/store/apps/details?id=net.sourceforge.opencamera
https://play.google.com/store/apps/details?id=com.caddish_hedgehog.hedgecam2
As I said before: These two problems are fixed: stuck on fastboot and no sound...
I also use open camera, but this, the standard camera, HD-camera, ... didn't work!
After dirty flash (from build 20200429 to 20200501) my phone stuck on cr logo but after clean install everything is ok.
Same situation after dirty flash from build 20200501 to 20200504.
On 20200504 build ...... no camera (open camera, gcam) is working. Back to 20200501.

Categories

Resources