This ROM is based on Nightly version AICP but its Stable for daily use.
FEATURES:
All AICP features
Lollipop features (customized by AICP)
BUGS:
Unresized BootAnimation [on the center] (I did this on purpose, if you want you can change.)
Sees there is a sim card in tablet but there isn't. [Says "NO SERVICE"] (You can disable with " Permanent GSM solution down below)
Little bugs [does not affects daily use]
Can't install GAAPS because system partition is small (FIXED IN VERSION 2 ! - FIXED IN V2 !)
_-----------------------------------------------_
Permanent GSM solution:
1) not avaliable instructions
2) when way to disable cellular its entered ti here
INSTALLATION:
1. Install TWRP Recovery [if you haven't]
2. Boot into recovery mode
3. Wipe "System,Data,Cache,Dalvik Cache"
4. Flash ROM file from install zip section
Note: If you will flash GAAPS don't reboot after flashing system, flash GAAPS before rebooting.
Note2: Download v2 if you need flashing GAAPS.
XDA:DevDB Information
AICP SM-T800, ROM for the Samsung Galaxy Tab S
Contributors
romngenie
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: TWRP
Based On: AICP
Version Information
Status: Stable
Created 2016-06-25
Last Updated 2016-06-25
hello, after searching I've found out that AICP stand for Android Ice Cold Project. May I ask if it look like Cyanogenmod or the AOSP ? first time I hear about it...
and just to know, why isn't it on the list of : http://dwnld.aicp-rom.com/?device=all&type=all ? for the chagallwifi T-800 ?
zigonneux said:
hello, after searching I've found out that AICP stand for Android Ice Cold Project. May I ask if it look like Cyanogenmod or the AOSP ? first time I hear about it...
and just to know, why isn't it on the list of : http://dwnld.aicp-rom.com/?device=all&type=all ? for the chagallwifi T-800 ?
Click to expand...
Click to collapse
Because i just created a XDA project. I cant contacted to AICP
Sent from my Asus ZenFone 2 Laser (ZE550KL) using XDA Labs
nice rom but some errors: can't check for update. Can't install any gapps because lack of space in the system file. Very fast rom , but can't test anything else.
zigonneux said:
nice rom but some errors: can't check for update. Can't install any gapps because lack of space in the system file. Very fast rom , but can't test anything else.
Click to expand...
Click to collapse
System partition is 300-450 MB i dont know why you can't install GAAPS (Fixed in V2 of ROM)
Can't check for update because its unofficial and no more updated . (except bug fixes)
Thanks for installing.
zigonneux said:
nice rom but some errors: can't check for update. Can't install any gapps because lack of space in the system file. Very fast rom , but can't test anything else.
Click to expand...
Click to collapse
YOU CAN INSTALL GAAPS LIKE THIS: (GAAPS FIXED IN V2 - TRY V2 WITHOUT ANY "occupation")
1. Download and install V2 of the ROM.
2. Install Gaaps.zip (install pico)
download says: Uploaded: 2016-Jul-19 , so I guess that the Fixed file is not there yet. I'll wait for the Fix and test for the fun of it... post the link when the fixed file is ready. I'm too lazy to deal with the Solution : decompress and recompress etc.
zigonneux said:
download says: Uploaded: 2016-Jul-19 , so I guess that the Fixed file is not there yet. I'll wait for the Fix and test for the fun of it... post the link when the fixed file is ready. I'm too lazy to deal with the Solution : decompress and recompress etc.
Click to expand...
Click to collapse
GAAPS is fixed in V2 version.
http://forum.xda-developers.com/devdb/project/dl/?id=19411
there is V2 Link.
You dont need uncompress and other techniques for this. Just download V2 and your GAAPS will fixed.
And i know i dont update this ROM except bug fixes.
SM-T800 cihazımdan Tapatalk kullanılarak gönderildi
Related
I got a great response with my previous ROM , Kryo-AICP , but there were some rough edges , which had to be smoothened up .
I have made this ROM on the basis of no compromises , in the field of customisability , performance , battery life , and smoothness !
I have taken Resurrection Remix as a base , as it offers the most customisability , while still retaining the smoothness of stock , sometimes even more !
Features :
All RR features !
GCC & Clang O3 (Optimized for speed ) !
Enabled Graphite and its identity transformation !
ODEXED for faster boot times and better performance !
More Optimizations and features coming soon !
INSTALLATION :
Download the latest build
Download Gapps
Take a nandroid backup
Recommended - Full wipe and factory reset
Flash ROM using latest TWRP Recovery
Flash Gapps
Reboot.
Enjoy!
UPDATE :
Download the latest build of Resurrection Remix ROM
Flash ROM
Wipe cache
Wipe dalvik cache
Reboot
Enjoy!
Download Stable ROM
Downloads :
ROM : https://mega.nz/#!uwVG1LTQ!W4VPw-swOdhRcWjAIV_wIfpLj_duFOTRh_pGFpn6EZg
Recommended GAPPS : http://opengapps.org
Credits :
@Eliminater for being of great help in fixing the setup wizard FC @Joshua_B. for the bootanimation (coming soon)
@Taker18
@Naman Bhalla
Source
https://github.com/RR-OnePlus3/rr_de...eplus_oneplus3
https://github.com/RR-OnePlus3/kernel_oneplus_msm8996
https://github.com/RR-OnePlus3/rr_pa..._apps_Settings
https://github.com/RR-OnePlus3/device_oppo_common
https://github.com/CyanogenMod/andro...e_qcom_display
https://github.com/CyanogenMod/propr...vendor_oneplus
https://github.com/CyanogenMod/andro...opensource_Nfc
https://github.com/CyanogenMod/andro...rce_frameworks
https://github.com/CyanogenMod/andro...rce_libnfc-nci
XDAevDB Information
Resurrection ROM, ROM for the OnePlus 3
Source Code: https://github.com/ResurrectionRemix
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod 13
Version Information
Status: Stable
Current Stable Version: 5.7.3
Stable Release Date: 2016-08-16
Reserved
Reserved another just in case
Going for it! Will report!
Is this stable enough to take the number one spot in multirom?
@Manav Bhagia could you implement an option to modify the alert slider with Sound / Vibrate / Silent ? That would be fantastic!
Here we go
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Working like a dream Thanks for all your hard work @Manav Bhagia. I will run for a day and post BetterBatteryStats asap there after. Peace
ohw damnit will try it will report in some minutes D:
Hello ROM installed and removed because some lack tweak compared to your Kryo-AICP is who you pity
Otherwise you can integrate your tab transparency Rom? if your rom es can be the best
@Manav Bhagia, can you also provide androidfilehost links for your ROM
@Manav Bhagia the only feature we miss from OOS is locking recent apps in while clearing. pls consider adding this feature in upcomming builds
EDIT: pocket mode too if possible
Let me know Manav if you need a mirror somewhere.. I can try and help.. Cheers..
1. Can i dirty flash this over official rr or blackjubel rr??
2. will it work with arter's kernel?
3. Does it support f2fs on data and cache?
Thanks in advance
All good here, no overclocking or anything, stock kernel. Battery life is very good for me.
Oh, alert slider isn't working for me
Issue report:
Skype not working.
Install instructions are vague... download newest RR and enjoy? Or do you mean after installing newest RR.
wipe Cache and Davlik cache
Then dirty flash flash this build over RR?
Sent from my OnePlus3 using XDA Labs
DonJuan89 said:
Oh, alert slider isn't working for me
Click to expand...
Click to collapse
I second this... it doesn't work.
garz said:
I second this... it doesn't work.
Click to expand...
Click to collapse
confirm, alert not working
also device is shown "unknown" within the about phone information
Cheers
Mike
As the name suggests , this ROM carries forward the Legacy of Kryo due to the fact that it continues to be dedicated to optimize the ROM as much as possible and giving the best combination of performance and smoothness , with no loss on battery life !
Features :
All Cm14.1 features
GCC & CLANG O3
FORCE O3 ON ART IN ALL BUILDS (PERFORMANCE MODE)
ODEXED FOR FASTER BOOT TIMES AND APP OPENING SPEED
SPEEDED UP BINARIES
LOTS MORE TO COME !
Download : https://mega.nz/#!C9c1jZxC!XxEBwEooigPvrxgr1xNC1U7xndKiIfwbQs8XXDfYvTA
Recommended GAPPS : opengapps.org
Recommended recovery : Official TWRP 3.0.2-0 and above
Recommended firmware : OOS 3.2.6 and above
BUGS : Same as official CM14.1
INSTALLATION :
Download the latest build
Download Gapps
Take a nandroid backup
Recommended - Full wipe and factory reset
Flash ROM using latest TWRP Recovery
Flash Gapps
Reboot.
Enjoy!
Credits :
Cyanogenmod
AOSP
AOSPA
@Joshua_B. for the bootanimation , wallpapers (coming soon) and inspiring me to continue when my builds failed !
The Beta Testing Group
telegram.me/KryoLegacyPublic
ROM OS Version: 7.1.x Nougat
Based On: CyanogenMod 14.1
Source : https://github.com/CyanogenMod
For further insider info , and updates on the next build ,(maybe even some secret stuff) feel free to join the Telegram group which was previously used for the Beta Testing Team :
telegram.me/KryoLegacyPublic
Reserved one more just in case !
Modified recovery or official?
And what about substratum?
619 MB..? Firmware included
ivicakc said:
Modified recovery or official?
And what about substratum?
Click to expand...
Click to collapse
Official twrp . Partial substratum support is present . Full coming soon .
shafi31 said:
619 MB..? Firmware included
Click to expand...
Click to collapse
You need to flash OOS 3.2.6 or above firmware . ROM is ODEXED , and lots of improvements , hence the large filesize !
When you have more time, can you please post some screenshots?
ivicakc said:
When you have more time, can you please post some screenshots?
Click to expand...
Click to collapse
I'm gonna update the thread soon with more info and screenshots
does the echo issue there ?
Battery icon fixed ?
Thanks man awesome rom
souravddr285 said:
Battery icon fixed ?
Click to expand...
Click to collapse
Did u read it says same bugs as cm14.1?
Please when you update the thread add the list of bugs known to you, so we dont have to report those...
ach3fck said:
Please when you update the thread add the list of bugs known to you, so we dont have to report those...
Click to expand...
Click to collapse
CM bugs only report those to CM not here
geekynoob said:
Did u read it says same bugs as cm14.1?
Click to expand...
Click to collapse
I was asking because it was fixed momentarily in both official and unofficial 14.1. Anyways I hope it is fixed soon.
Where I can find the firmware 3.2.6?
Which base do you use, cm 14.1 nightlies or some other unofficial version?
Can I flash pixelfy on top of this?
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
PinoF75 said:
Where I can find the firmware 3.2.6?
Click to expand...
Click to collapse
[FIRMWARE/MODEM] [31.10.2016] Collection - Flashable Zips!
ANOTHER LINK
About 20,900 results (0.45 seconds)
For those who wants to try out the new MIUI 9 Beta/ Alpha rom.
Expect bugs.
No gapps(install yourself)
some Chinese bloatware installed.
Alpha will get faster updates with more bugs.
Beta will get slower updates with lesser bugs.
-----------------------------------------------------------------------
Installation:
1. after flashing from Fastboot you'll have to install TWRP recovery again.
2. before booting into rom, flash SuperSU zip from TWRP (Download from official super su site) and reboot.
3. download http://www.mediafire.com/file/7ryryrgxp1v05bd/Google+Installer_2.0.apk this and install.
4. go to recovery and flash gapps.
5. reboot.
BUILD 26/07/17
Link Beta: (Fastboot Rom)
http://bigota.d.miui.com/7.7.26/sagit_images_7.7.26_20170725.0000.00_7.1_cn_9059b7e4c4.tgz
Link Alpha: (Fastboot Rom)
http://bigota.d.miui.com/7.7.26/sagit_alpha_images_7.7.26_20170726.0000.00_7.1_cn_daf8d3de21.tgz
I'll keep updating the links as soon as new builds come up till official release.
(I didn't build this rom, I'm just sharing the goodness)
Nice...
But I waiting for version flashable twrp.
N1ldo said:
Nice...
But I waiting for version flashable twrp.
Click to expand...
Click to collapse
try the MS MIUI version
https://yadi.sk/d/K8bT4vmD3LZKH5
or miui pro Version 7.8.3
Gesendet von meinem MI 6 mit Tapatalk
I don't get ota of miui 9 anyone has link?
I need ota files...
Flash on Mi6
tom_riddler said:
For those who wants to try out the new MIUI 9 Beta/ Alpha rom.
Expect bugs.
No gapps(install yourself)
some Chinese bloatware installed.
Alpha will get faster updates with more bugs.
Beta will get slower updates with lesser bugs.
-----------------------------------------------------------------------
Installation:
1. after flashing from Fastboot you'll have to install TWRP recovery again.
2. before booting into rom, flash SuperSU zip from TWRP (Download from official super su site) and reboot.
3. download http://www.mediafire.com/file/7ryryrgxp1v05bd/Google+Installer_2.0.apk this and install.
4. go to recovery and flash gapps.
5. reboot.
BUILD 26/07/17
Link Beta: (Fastboot Rom)
http://bigota.d.miui.com/7.7.26/sagit_images_7.7.26_20170725.0000.00_7.1_cn_9059b7e4c4.tgz
Link Alpha: (Fastboot Rom)
http://bigota.d.miui.com/7.7.26/sagit_alpha_images_7.7.26_20170726.0000.00_7.1_cn_daf8d3de21.tgz
I'll keep updating the links as soon as new builds come up till official release.
(I didn't build this rom, I'm just sharing the goodness)
Click to expand...
Click to collapse
Hello,
Currently I use Mi6 with Miui 8 7.7.20 (Xiaomi.eu).
Do you know if is needed wipe data and has there been a partition layout change?
Thanks!
Some information you should know..
This is a full Stock ROM with android version 8.0
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
You are not allowed to use this base, if you want to make rom, "DIY"
Any sort of File Kanging will be reported without hesitation, we know our codes.
If you like this rom and appreciate my efforts, Hit the Thanks button, and consider a donation
This is the first Oreo Custom ROM for this device.
RULES OF POSTING : READ everything before commenting, And especially the install steps, the rom has been tested throughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
Android 8.0
Deodexed
Heavily debloated
Zipaligned
Very Optimised
Battery and performance better than stock
Full Samsung experience 9.0 without missing vital apps
And many more
Extra Features :-
All the original features are present (Wifi,Bluetooth etc)
Many prop and feature tweaks
DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
Official status in settings
Many prop tweaks
Many feature tweaks
Check the changelogs for the FULL feature set
Kernel :-
OxygenKernel V1
- Basic Kernel to Boot Oreo on exy7570
- Support for deodexed Oreo systems
- Samsung Security Disabled
- Disabled more knox and logging
- Knox 0X0
- Bootstate Green for safteynet
- Patched some props for safteynet
- Init.D Support
- Other minor improvments
and many more goodies
ensure you have LATEST TWRP
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the recovery.img from downloads section
Reboot to recovery
Flash the ROM.ZIP
Flash Magisk
Reboot system
@asysh
@BlackMesa123 for RMM switch
@samsung
@topjohnwu for for magisk
Testers :
ME
Downloads. Changelogs , F.A.Qs below
XDAevDB Information
Extreme, ROM for the Samsung Galaxy J3
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest bootloader and modem
Based On: TouchWiz
Version Information
Status: Testing
Current Stable Version: V1
Stable Release Date: 05.06.2019
Created 05.06.2019
Last Updated 05.06.2019
DOWNLOADS
DOWNLOADS:
Extreme ROM V1 Based on Stock ROM [LATEST]
J330F:https://mega.nz/#!jHhViSjA!pR3IQrguIVwA9JBb3UiXEsR1brfpAORmU26Ue272KUo
J330FN:https://mega.nz/#!LLIX2SSK!8iXjkjJiqahydPO40kLAugdPJpX_pdiDmoFp1nsLpM8
recovery.img:https://mega.nz/#!neRhVS4B!UH_4VeBm_OMyjPTKRQKvRtwODiz7n8MTBXprQrXpni8
reserved2
reserved2
reserved3
reserved3
I will try it when I get home
I do not understand. Yesterday I downloaded V2 version. Today, there are no versions of V2. What's the last one?
regards,
zlihtar
zlihtar2 said:
I do not understand. Yesterday I downloaded V2 version. Today, there are no versions of V2. What's the last one?
regards,
zlihtar
Click to expand...
Click to collapse
Did you get it to boot?
Because I can't
zlihtar2 said:
I do not understand. Yesterday I downloaded V2 version. Today, there are no versions of V2. What's the last one?
regards,
zlihtar
Click to expand...
Click to collapse
This would be the V3 but I remade it from scratch and I put V1.This is the latest one.
Benfatica said:
Did you get it to boot?
Because I can't
Click to expand...
Click to collapse
Did yo u install the modded recovery? And why arent u responding on Tele?
victorAndrie said:
Did yo u install the modded recovery? And why arent u responding on Tele?
Click to expand...
Click to collapse
I had to reset my phone and I forgot to install Tele
Benfatica said:
I had to reset my phone and I forgot to install Tele
Click to expand...
Click to collapse
Ok
victorAndrie said:
Ok
Click to expand...
Click to collapse
I will install it when I get home
---------- Post added at 08:39 AM ---------- Previous post was at 08:08 AM ----------
victorAndrie said:
Ok
Click to expand...
Click to collapse
I just tried it but got a black screen again
Has anyone tried yet? Benfatica, what is your version J330F or J330FN?
Thanks,
regards
zlihtar2 said:
Has anyone tried yet? Benfatica, what is your version J330F or J330FN?
Thanks,
regards
Click to expand...
Click to collapse
it's the FN version
hello , after instalation my phone don't boot
Edit : the bootlogo don't boot
ExtremeGrief said:
Did yo u install the modded recovery? And why arent u responding on Tele?
Click to expand...
Click to collapse
same cant boot just black screen
how to instal moded twrp ? I used normal twrp
I tried install moded recovery with adb but phone wont boot up into recovery mode
All the links are dead
Hello developer! Please help fix link download rom.
nil2009 said:
Hello developer! Please help fix link download rom.
Click to expand...
Click to collapse
This rom has been abandoned. The chances of the download link being fixed are very low.
Will there be a version for j327p???
Hello everyone!
This is a dotOS port from the Galaxy J3 2016 (made by @lucas000br) to the J2 2016.
Working:
My (basic) testings all seemed to work quite well
Added features and patched bugs:
Patched lock button in boot.img
Pre-rooted the ROM
Added FM-Radio from ViperOS (microG variant only)
Optimized features
Signature spoofing patched on microG variant
[See post #2 for further information]
Known problems:
Gapps variant is laggy (nothing I can do - Google sucks)
Your J2 shows up as a J3 (it's a port that's why)
Download links and installation instructions can be found in post #2
Credits:
Nanolx for Signature Spoofing
PixelBoot for base
lucas000br for modified base
Me for everything else
Obligatory Links:
Kernel Source: Github
Original Build (Abandoned by PixelBoot): XDA Developers (No source code)
Port of Port (by lucas000br): Thread seems to have disappeared?
Variant information (Which one is which?)
GAPPS: This one has most of the stock Google apps (Drive, YouTube, etc) + GSF present. Recommend for most users. RAM usage 640mb on idle
microG: All Google apps have been replaced with FOSS software. Google Services Framework has been replaced with microG. Signature spoofing is also present. RAM usage 560mb on idle
DIY: Want to build your own ROM? This one's for you! Everything except the bare minimum has been stripped out, so that you can decide what to pick for your ROM. (For power users only).
Stock dotOS: The stock dotOS compiled by PixelBoot for J3 2016; with Wi-Fi, Bluetooth, Signature spoofing and Power Button patched. Most stable out of all. You will need to flash additional GAPPS to get Google Services. RAM Usage 500mb.
Download Links:Stock dotOS (Recommended): MEGA
GAPPS: Oreo-Themed dotOS
microG: Oreo-Themed dotOS
DIY: Oreo-Themed dotOS
Installation Instructions:[If you don't have TWRP, get an image and install it from here]
GAPPS:
Boot to TWRP
[Do make sure to backup your data]
Wipe Dalvik, Data, System, Cache
Flash the ROM
Reboot. Done!
microG:
Boot to TWRP
[Do make sure to backup your data]
Wipe Dalvik, Data, System, Cache
Flash the ROM
After rebooting, open microG settings.
Go to self-check and tick the check boxes that are unticked (that will initialize microG)
Go back, and enable Device Registration, Cloud Messaging and Device Attestation
Then go to Location backends, and configure the DejaVu and Nominatim backends.
Done!
DIY and Stock dotOS will be the same as GAPPS variant
Changelog:
v1.2: Initial release06/05/2021: After lucas' comment, I realized that this wasn't the stock dotOS. So I have ported the stock dotOS created by PixelBoot. Try it out!
lucas000br said:
well done!
Also, PixelBoot did the DotOs base rom, i just modified it to be more like Android Oreo
(dont worry because i credited PixelBoot in the original j3 thread)
Click to expand...
Click to collapse
oops I need to credit him
Thanks for informing!
good soon try it out
i have flashed stock rom provided by u of dot os but my phone stuck at samsung logo pls look into it .....i am sure i have flashed it n follow all steps correctly
Uniqueshiva said:
i have flashed stock rom provided by u of dot os but my phone stuck at samsung logo pls look into it .....i am sure i have flashed it n follow all steps correctly
Click to expand...
Click to collapse
okay I'll try flashing it again. wait
NullCode said:
okay I'll try flashing it again. wait
Click to expand...
Click to collapse
btw i don't have stock rom installed before i flash it......I am on viper os....then i boot to twrp wipe sytem cache data n flash your provided dot os stock rom then i reboot but stuck at Samsung logo
@Uniqueshiva thank you for the information. I had made a typo in the updater script that caused the boot image to fail.
Please download the new ROM and flash it. I've confirmed it to work
NullCode said:
@Uniqueshiva thank you for the information. I had made a typo in the updater script that caused the boot image to fail.
Please download the new ROM and flash it. I've confirmed it to work
Click to expand...
Click to collapse
thx for responding so fast btw i will try it tomorrow as my data got finished today sorry for it...i will surely give feedback
edit- I tried stock dos os rom n flash arm 7.1 Pico gapps...boot animation appears but after sometimes black-brown screen appears after 5 min phone started but its written setup wizard failed i am not able to go ahead as setup wizard failed written every time so i turn off the phone maybe it can be the gapps problem now i will try dot os magisk gapps version provided by u btw i am curious that what is DIY dot os u give is all bugs fixed in it just asking..
Uniqueshiva said:
thx for responding so fast btw i will try it tomorrow as my data got finished today sorry for it...i will surely give feedback
edit- I tried stock dos os rom n flash arm 7.1 Pico gapps...boot animation appears but after sometimes black-brown screen appears after 5 min phone started but its written setup wizard failed i am not able to go ahead as setup wizard failed written every time so i turn off the phone maybe it can be the gapps problem now i will try dot os magisk gapps version provided by u btw i am curious that what is DIY dot os u give is all bugs fixed in it just asking..
Click to expand...
Click to collapse
hmm it could be flashing gapps causes problem with the rom...
yes try the gapps version i provided
the diy one is mainly for rom porters. it has many features removed so that rom porters can think about what features to add in the rom
only basic feature available in rom is phone and messaging support
I can't access internal storage after flashing. Stock file manager crashes if i open it. Stock browser says "no sd card, usb storage is required to download the file". There's no internal storage even after connecting the phone to pc. It only shows memory card.
Edit: Just wiped the internal storage and re-flashed it. Works fine now
Thanks for porting this amazing rom
@NullCode, thanks for your work for device j210f...I like the ui of dot os..but i must say your previous build i.e viper os was more stable n amazing atleast for me....btw thanks a lot for keeping this device alive...
Dark theme not working in settings and other apps.Any help?
shayara said:
Dark theme not working in settings and other apps.Any help?
Click to expand...
Click to collapse
there's a theming option in settings > display > scroll to the end
from there figure out what to do (I've confirmed its working)
Uniqueshiva said:
@NullCode, thanks for your work for device j210f...I like the ui of dot os..but i must say your previous build i.e viper os was more stable n amazing atleast for me....btw thanks a lot for keeping this device alive...
Click to expand...
Click to collapse
I know, viperOS was much more stable because I took 1 entire year to port and test the rom (i started testing January 2020 )
however, dotOS was ported in only 1 month
so it is not as polished
but im glad you liked it
NullCode said:
Hello everyone!
This is a dotOS port from the Galaxy J3 2016 (made by @lucas000br) to the J2 2016.
Working:
My (basic) testings all seemed to work quite well
Added features and patched bugs:
Patched lock button in boot.img
Pre-rooted the ROM
Added FM-Radio from ViperOS (microG variant only)
Optimized features
Signature spoofing patched on microG variant
[New] 2 more ROM options to choose from (with varying features)
[See post #2 for further information]
Known problems:
Gapps variant is laggy (nothing I can do - Google sucks)
Your J2 shows up as a J3 (it's a port that's why)
Download links and installation instructions can be found in post #2
Credits:
Nanolx for Signature Spoofing
PixelBoot for base
lucas000br for modified base
Me for everything else
Note: You might've noticed how I didn't put [PORT] in the thread title. It is mainly because this ROM varies from J3's dotOS so much, I don't think it is fair to call this one a port.
Click to expand...
Click to collapse
Hey.
I am using this ROM since 6th May (stock variant) and it is very great but has lots of bugs.
1. Bluetooth Audio stutters really bad (problem in every Android N rom for this phone)
2. Google Meet doesn't work (just shows the logo and then crashes) I am using Open GAPPS
3. Many system app crash randomly (sometimes even the launcher and system ui) requiring me to take out the battery and restarting the phone.
4. Camera quality is significantly bad compared to stock 6.0
But still a great project.
Thank you for keeping this phone updated.
NullCode said:
there's a theming option in settings > display > scroll to the end
from there figure out what to do (I've confirmed its working)
Click to expand...
Click to collapse
Okay.Thnx.
NullCode said:
I know, viperOS was much more stable because I took 1 entire year to port and test the rom (i started testing January 2020 )
however, dotOS was ported in only 1 month
so it is not as polished
but im glad you liked it
Click to expand...
Click to collapse
Omg 1 year......that's y it feels so smooth in viper os i get nearly 900 mb free ram with gapps again thanks for your hardwork.....I know that u may be bored now for working on j210f that is old device but still hoping for more
Uniqueshiva said:
Omg 1 year......that's y it feels so smooth in viper os i get nearly 900 mb free ram with gapps again thanks for your hardwork.....I know that u may be bored now for working on j210f that is old device but still hoping for more
Click to expand...
Click to collapse
My build has more free ram and battery btw.