Hi, Im trying to reinstall Windows 10 on a laptop for a friend, a Voyo Vbook V3.
Ive tested the image and the USB stick on my laptops and it works fine, however whenever I try it on this laptop I just get the above message.
Ive disabled the Secure Boot option but Windows Boot Manager remains the only option in boot options, I cant get USB to appear.
Running Advanced Startup and telling Windows to boot from USB again just gives me the message "System Doesn't Have any USB boot Option".
Dont have a clue what to do now, any help appreciated.
Bump, anyone got any clues?
I don't think this is anything to do with Windows. You need USB boot enabled in the BIOS in most machines,
Sent from my Le Pan TC802A using Tapatalk
Related
Hello all,
A bit strange problem. I was trying to adapt MoDaCo custom rom to my Vega from 1,09 FW. Everything was ok until ticking the USB debug mode. Until that time, the device was normal APX mode, but as I switched to USB debug mode, my PC (with Win7 x64) reconized it as "NVidia Tegra 2 USB Device" under disk drivers. So, I cannot go further steps, since windows doesn't recognise device as "android phone"
Anyway, to overcome this I tried to uninstall-reinstall but it didn't work. After every re-install, win7 recognised as same. No change.
Then I tried to change the drivers to right one but this was not possible since when I attempted to do so, the msg I got "You have already the most updated driver"... Then close.
Finally I tried to erase some "tegra2" entries from regedit. Some I could, some not but this was also dead end. Everytime the tabled was recognised as "usb device"
The important thing is I cannot go back to "APX mode" again.
Any advises about this issue?
Many thanks in advance.
The usb switcher is currently not compatible with v1.09. You can try going to software tool in settings and selecting "erase all content and settings"
Hey guys, for some reason I'm unable to perform a Task29 or flash anything from MAGLDR 1.13's USB flasher mode.
Here's what happened.
I was using CMYLXGO's stock Desire HD ROM and having data problems, so I tried to change my kernel to Tytung's using CWM. After I did that, Android stopped booting - kernel load fail. I don't know how to fix that, so I figured I'd just do a clean install.
When I tried to do a Task29 from the 3 color screen, I get stuck at "Verifying information from your PDA phone..." It then tells me it can't establish a USB connection. I ran the program as administrator.
Okay, I said to myself, I'll try reflashing CWM from MAGLDR's USB Flasher. I got "Wait USB... USB." and tried, but DAF.exe also told me it couldn't establish a USB connection.
I know the USB connection is working, because I've tried it with two different cords and reformatted the SD card through MAGLDR's USB mass storage mode, which still works.
Can anybody help me out? Currently I can't boot android, don't have windows mobile and am f**ked...
Thanks,
Zuka
I think I've solved it, if anyone else is having the same problem. I believe it's because I uninstalled Windows Mobile Device Center when I moved to android full time.
EDIT: That was in fact the problem. Hint: NEVER UNINSTALL MOBILE DEVICE CENTER
zukŠ° said:
I think I've solved it, if anyone else is having the same problem. I believe it's because I uninstalled Windows Mobile Device Center when I moved to android full time.
EDIT: That was in fact the problem. Hint: NEVER UNINSTALL MOBILE DEVICE CENTER
Click to expand...
Click to collapse
Yes WMDC and ActiveSync have the USB drivers for your HD2 will it is in bootloader, hence no connection via USB as you have no USB drivers for bootloader. Glad you figured your problem out and posted it back here for others to see. Too bad I did not see your threadcearlier as I may have been able to say you a little stress.
Haha, I appreciate it, but when I tried it on my housemate's computer and I saw "Windows Mobile Device Centre installing..." I knew how I'd messed up. Thanks anyway, hopefully this can serve as a reference thread if anyone googles and comes up short.
hello i have opad p10 oem version of advent vega after some market application install first my desktop window gone then i tried to restart in recovery mode but tablet is no screen cant inter in cwm only white circle with andriod robot with in upear micro second and gone pleas help i cant connect with my pc because usb problem any method to boot or flash with sdcard i have some knowledg about linux and lablet install 3.2 9n1 thanks sorry for my bad english
As far as i am aware the only way out is to reflash the stock firmware, without usb your a bit stuck. what is the problem with the usb connection?
i am trying 3 systems xp w7-64 w7-32 all are device not recognized error in device maneger is yellow mark unknown device
You need to install the usb recovery drivers. They are on the advent/pov websites. I assume there the same as your tab.
i cant access my tablet because i have usb not recognized error i want any alternat method to flash my tablet rom like sd card or usb drive thanks
no one solved my problem any idea if i use usb to serial cable or usb to lpt cable
You need to sort the usb driver issue. That will solve your problem. As far as i am aware flashing the stock rom with any other cable is not possible.
finaly i found a pc i install a nvidia driver audi sign green but run moddedstock its showing error nvflash uid read failed what this error and some time nvflash runing but blank screen nothing hapen
every time connect to pc masseg appear this device perform faster but connect to usb 1.1 and every time flash hang betwen system.img copying last file why is connect slow speed not full usb 2 speed there is cable problem or some thing else or driver problem ihave tried vega flash and modded stock v2 any help to try with linux ubuntu pleas help me thanks
any help to flash only system.img or only flash cwm to boot into cwm and then install modded rom in to opad
Can you boot in recovery mode?
SGS2-i9100; SGS3-i9300; Archos 101 Turbo (G9/250gb/512mb)
My main issue is drivers. I ended up formating my computer with a fresh install of Win7 64-bit few weeks ago, but did this with android on my phone. So now I have a dilemma.
I cannot get drivers anywhere [online] that will let me go into any USB mode for either:
MAGLDR
or
Tr-Color Screen
So either with magldr it just sits there forever saying USB Wait...[never says usb]
And with tri-color screen it never says USB, if I try different USB ports it says Serial and never changes to anything else.
I think my problem is I need WM back, and sync it with WMDC. The problem to that? I cant even flash WM...
Anyone know of any other way to get the drivers for Win7 64? So I can use USB Flasher or tr-color screen.
Hope someone knows a solution...I have been looking for weeks to a resolution to this problem :-/
Thanks in advanced
Try reinstalling Windows Mobile Device Center.
I tried that, I installed it and it installed a Microsoft Mobile device driver, but it still does not say USB on the flasher mode or on the tri-color screen...
Can anyone find out the name of the driver/device when they plug their phone in and it enables USB (under usb flasher or tri-color screen)? Maybe from there I can search better names for the right driver...
Any ideas? Just trying to see if anyone knows any solution to this...
Thanks
UPDATE:
Ok, so I had a minor cut in my cable, with only the shielding wire coming out a little bit. I luckly had another micro usb in house that I could try. Seems if there is the slightest problem with your cable, get it replaced. MY USB WORKS FINE NOW . Try new cables if you are having serious driver issues (tried it on 2 computers, thats when I said it has to be the cable.). Could be the simple thing.
I've read through so many threads on so many forums trying to fix this, and I'm about to throw this thing through the wall.
I'm running CyanogenMod 7 nightly on 2.3.7
When I connect the phone to any PC (I've tried Win7 64/32 bit, XP SP3, XP SP2) I get a charging icon in my notification bar, but the USB Storage mode never opens to enable/disable. After about 10 seconds I see "USB Device Not Recognized." Happens the same on every PC. I can still access my internal storage via FTP, just not via USB. The device shows in my device manager as "Unknown USB Device."
Not sure if it's related, but when I boot into FastBoot it runs USB Control/USB Control init and then just freezes. Even after downloading a ROM update with ROM Manager it says "NO ROM FOUND"
This is what I've tried:
USBDeview to uninstall all Android-related drivers, reinstalled Samsung and Google SDK rev 4 drivers.
USB data wipe (for the hell of it, really.)
Multiple PC's with different OS and 3 different USB data cables, including the original.
At this point I'd like to try a factory reset. When I try to unroot with SuperOneClick the program just crashes. When I try a reset from the phone it fails to boot into recovery, and using the Factory data reset produces a "null" error.
I know just enough to be dangerous. If I'm missing something please let me know, and I appreciate any help.
--------------------------------------------------------------
Tried loading a CM9 rom from the SD card that I FTP'd over via ClockworkMod Recovery. It asks for data+cache wipe, then just boots into recovery. I get "NO IMG FOUND" and USB CONTROL INIT and USB CONTROL INIT END.
Try installing pdanet on your computer. Its what I did in order for my computer to recognize my phone. Hope it helps.
Should have mentioned earlier that I also installed PDANet after I wiped my drivers. It couldn't detect the phone being connected and did not completely install.