437.64mb software update?? - Galaxy S 4 Q&A, Help & Troubleshooting

I received updates on both of my S4s, size is 437.64mb, in fact i am on lollipop 5.0.1 did anybody else receive this update yet?

Is the phone running the latest ROM? The stock ROMs are at sammobile.com and you can compare the installed ROM to sammobile.com's ROM files..

gorandroid said:
I received updates on both of my S4s, size is 437.64mb, in fact i am on lollipop 5.0.1 did anybody else receive this update yet?
Click to expand...
Click to collapse
Yes, I also got this update recently by updating your device your security patch will be updated and performance improved......
Sent from my GT-I9505 using Tapatalk

AshTechsoft said:
Yes, I also got this update recently by updating your device your security patch will be updated and performance improved......
Click to expand...
Click to collapse
Ah nice, where can i see the changelog? I googled but there is nothing about it.

audit13 said:
Is the phone running the latest ROM? The stock ROMs are at sammobile.com and you can compare the installed ROM to sammobile.com's ROM files..
Click to expand...
Click to collapse
I am running Android 5.0.1 official by Samsung, phone is not rooted. Sammobiles provides stock sammy firmwares

gorandroid said:
Ah nice, where can i see the changelog? I googled but there is nothing about it.
Click to expand...
Click to collapse
When you are going to download the updates.
It will show the changelogs.....
[There is no any major changes in this update like UI changes etc.....]

AshTechsoft said:
When you are going to download the updates.
It will show the changelogs.....
[There is no any major changes in this update like UI changes etc.....]
Click to expand...
Click to collapse
Hmm then i missed that b4 installation...

Related

[Q] Latest firmware?

Is this the latest firmware on my S5? As shown in the pic below just curious because i got it and went to updates and it says latest updates alredy installed
Thanks
If it tells you it has the latest, then it has the latest for your device and region.
But the absolute latest is ANG7 for the 900F.
Hellscythe said:
If it tells you it has the latest, then it has the latest for your device and region.
But the absolute latest is ANG7 for the 900F.
Click to expand...
Click to collapse
ANG9 for the Netherlands (PHN) seems to be newer in build date.
gee2012 said:
ANG9 for the Netherlands (PHN) seems to be newer in build date.
Click to expand...
Click to collapse
But ANG7 has a way newer change list which has been confirmed by the ROM builders here on XDA.
johan81 said:
But ANG7 has a way newer change list which has been confirmed by the ROM builders here on XDA.
Click to expand...
Click to collapse
Oké, i`ll take your word for it
gee2012 said:
Oké, i`ll take your word for it
Click to expand...
Click to collapse
Edgarf28 is the dev of the ROM I run and he has confirmed it, it is a bit strange of course, but that is Samsung for ya

new firmware for lg D85520E_00

Looks like there is a update from LG .. new lollipop version D85520E_00
http://t.co/tousOtW8ir
Any big changes? Did you install already?
pit5bul said:
Looks like there is a update from LG .. new lollipop version D85520E_00
http://t.co/tousOtW8ir
Click to expand...
Click to collapse
Wow that was quick.. I only just flashed 20D!
Im on android now 6.2... Not going back to stock... Just letting people know about it... Maybe @Seven will build the next 6.3 based on 20E
Yes....
Can I flash from a V20D without loosing anything?
Sent from my LG-D855 using XDA Free mobile app
thanks
working with her:good:
TheSkyline35 said:
Can I flash from a V20D without loosing anything?
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, just do a normal flash (I did it a few minutes ago).
Fredouye said:
Yes, just do a normal flash (I did it a few minutes ago).
Click to expand...
Click to collapse
Something new?
Haven't noticed anything, coming from V20d
It's first update I get via OTA, says 1. Google patch 2. App Updates are changes.
It seems lollipop roms regarded stable, as it's available via OTA
btw changes are over 20c.
pit5bul said:
Looks like there is a update from LG .. new lollipop version D85520E_00
http://t.co/tousOtW8ir
Click to expand...
Click to collapse
it is for the 32 gb version lg g3?
thank you
its for both 16 and 32 gb... its a lg full firmware
Google maps opens device GPS now in 20e.
batuhanb85 said:
It seems lollipop roms regarded stable, as it's available via OTA
Click to expand...
Click to collapse
No way, my ota is still 10L :crying:
what is the build number? still lrx21r?
behnann said:
what is the build number? still lrx21r?
Click to expand...
Click to collapse
Yes, LRX21R.
I load 20e version
pit5bul said:
Looks like there is a update from LG .. new lollipop version D85520E_00
http://t.co/tousOtW8ir
Click to expand...
Click to collapse
How to Flash From LG G3 Stock Firmware to Here I have The 32G Version d855
This is my first time so if possible with a lot of explanations
Thank you
AVIMPEG said:
How to Flash From LG G3 Stock Firmware to Here I have The 32G Version d855
This is my first time so if possible with a lot of explanations
Thank you
Click to expand...
Click to collapse
After you download kdz file, follow the instructions here: http://forum.xda-developers.com/showthread.php?t=2785089

New firmware KOT49H.P600UEUCOB1

Any information on it?
For U.S.?
pierrekid said:
Any information on it?
Click to expand...
Click to collapse
Software and stability updates, is all it said.
radpp16 said:
For U.S.?
Click to expand...
Click to collapse
I'm in US and downloaded it OTA. Installing now.
Are you able to stock root?
Updated to ART Compiler
pierrekid said:
Any information on it?
Click to expand...
Click to collapse
I updated it last night. When it was finished updating I noticed it was optimizing apps after it restarted. I got excited and thought "Lollipop" for a second but it appears they simply changed compilers ( JIT to ART ). This is still a welcome change as the ART compiler is known to be faster and more efficient for a lot of apps. A lot of apps did install again after the update but everything was seamless, no loss of data as far as I know. Also the Android Version is still 4.4.3.
4.4.3? Shouldn't it be 4.4.2?
Gesendet mit Tapatalk
Powered by Android
I installed via odin from sammobile. Cf-autoroot works. Need to install superuser by chainfire separately. Works great.
Mine OTA update fails to install at 24%. I'm rooted with stock ROM and recovery. I even unrooted and tried it again, and the same thing happens. SamMobile doesn't have any firmware (of any version) for this tablet (SM-P600) for the USA??? Seriously?
internetpilot said:
Mine OTA update fails to install at 24%. I'm rooted with stock ROM and recovery. I even unrooted and tried it again, and the same thing happens. SamMobile doesn't have any firmware (of any version) for this tablet (SM-P600) for the USA??? Seriously?
Click to expand...
Click to collapse
They do. The region you're looking for is Cellular South (XAR)
blindmanpb said:
They do. The region you're looking for is Cellular South (XAR)
Click to expand...
Click to collapse
Thank you! I couldn't remember what the region code was. I guess I could've just looked at the current firmware to figure it out, though... Doh!
And "Cellular South" is the USA region code (expecially for a WiFi tablet) because...? Haha
Edit
Laggy
pierrekid said:
Any information on it?
Click to expand...
Click to collapse
I've been running it for a bit and it's laggy as hell.
radpp16 said:
I installed via odin from sammobile. Cf-autoroot works. Need to install superuser by chainfire separately. Works great.
Click to expand...
Click to collapse
Weird I couldn't get root after I installed, anything special ?
louvass said:
Weird I couldn't get root after I installed, anything special ?
Click to expand...
Click to collapse
Im assuming you installed cellular south latest from sammobile. flash cf autoroot and let it do its thing. After reboot, goto playstore and download/install superuser chainfire. it asks you to disable knox,etc. Reboot and use rootchecker. I am stock rooted without custom recovery.
radpp16 said:
Im assuming you installed cellular south latest from sammobile. Then flash cf autoroot and let it do its thing. After reboot, goto playstore and download/installe superuser chainfire. it asks you to disable knox,etc. Reboot and use rootchecker. I am stock rooted without customy recovery.
Click to expand...
Click to collapse
Thanks Ill try it again
guitarabuser said:
I've been running it for a bit and it's laggy as hell.
Click to expand...
Click to collapse
I'm not noticing any lag. In fact, it seems battery life is also slightly better.
louvass said:
Thanks Ill try it again
Click to expand...
Click to collapse
Did auto root work on the new firmware
LiquidSmooth d2usc/d2vzw maintainer
Orion116 said:
Did auto root work on the new firmware
LiquidSmooth d2usc/d2vzw maintainer
Click to expand...
Click to collapse
Yes worked well I'm on newest firmware rooted
JTH182 said:
I'm not noticing any lag. In fact, it seems battery life is also slightly better.
Click to expand...
Click to collapse
Is it worth to flash this new rom??
edit: anyone running on new firmware, can I have your opinion??
louvass said:
Yes worked well I'm on newest firmware rooted
Click to expand...
Click to collapse
Thanks then I will update and then root.
LiquidSmooth d2usc/d2vzw maintainer

G935F Firmwares question

Hey, I just have a quick question about the firmwares for this phone. I'm in the us and mainly I just want quick updates and android pay. What's the best region/firmware I should get, in your opinions?
Brookspeffer said:
Hey, I just have a quick question about the firmwares for this phone. I'm in the us and mainly I just want quick updates and android pay. What's the best region/firmware I should get, in your opinions?
Click to expand...
Click to collapse
BTU works for me, right now with October security update and Nougat 7.0 beta inminent (probably). It also have Android Pay installed once you flash the ROM.
luismedina said:
BTU works for me, right now with October security update and Nougat 7.0 beta inminent (probably). It also have Android Pay installed once you flash the ROM.
Click to expand...
Click to collapse
Nougat 7.0 beta?
Jose0726 said:
Nougat 7.0 beta?
Click to expand...
Click to collapse
http://www.sammobile.com/2016/11/04/samsung-starts-android-nougat-beta-test-galaxy-s7-edge-uk/
I recommend XEF i think it receives updatez the most frequently and the newest ones.
luismedina said:
http://www.sammobile.com/2016/11/04/samsung-starts-android-nougat-beta-test-galaxy-s7-edge-uk/
Click to expand...
Click to collapse
Dont know why i get server error
Jose0726 said:
Dont know why i get server error
Click to expand...
Click to collapse
Yeah, everyone is getting this error at least for now
Sent from my SM-G935F using Tapatalk
....

Can I install this ROM?

So I found this on the XDA home page. It says SM-935A is required (I have SM-935U) BUT I thought that model number mostly applies to which carrier you're using...So if I flash the lates AT&T version via Odin can I then update to this Oreo build? Here's the article:
https://www.xda-developers.com/how-to-install-pre-release-android-oreo-on-the-att-samsung-galaxy-s7-s7-edge/
Thanks
KLit75 said:
So I found this on the XDA home page. It says SM-935A is required (I have SM-935U) BUT I thought that model number mostly applies to which carrier you're using...So if I flash the lates AT&T version via Odin can I then update to this Oreo build? Here's the article:
https://www.xda-developers.com/how-to-install-pre-release-android-oreo-on-the-att-samsung-galaxy-s7-s7-edge/
Thanks
Click to expand...
Click to collapse
On what firmware build are you now?
norbarb said:
On what firmware build are you now?
Click to expand...
Click to collapse
Im running the latest update on U firmware from January (ending in BRA1)
My carrier IS AT&T so I just thought I might be able to flash AT&T firmware then get the update.
KLit75 said:
Im running the latest update on U firmware from January (ending in BRA1)
My carrier IS AT&T so I just thought I might be able to flash AT&T firmware then get the update.
Click to expand...
Click to collapse
I asked the same question . I'm running the same firmware but I wont risk it.
Now im flashing the sm-g935a firmware
mhdsweidan said:
I asked the same question . I'm running the same firmware but I wont risk it.
Now im flashing the sm-g935a firmware
Click to expand...
Click to collapse
Cool. Let me know how you make out.
KLit75 said:
Im running the latest update on U firmware from January (ending in BRA1)
My carrier IS AT&T so I just thought I might be able to flash AT&T firmware then get the update.
Click to expand...
Click to collapse
You need to get to AT&T firmware first , and then flash this update.
norbarb said:
You need to get to AT&T firmware first , and then flash this update.
Click to expand...
Click to collapse
Thanks. I might hold off till there's a more stable build. If I didn't need to wipe everything I might give it a try.
But in case I change my mind, you extract the update.zip and apply update from sdcard, right?
KLit75 said:
Thanks. I might hold off till there's a more stable build. If I didn't need to wipe everything I might give it a try.
But in case I change my mind, you extract the update.zip and apply update from sdcard, right?
Click to expand...
Click to collapse
Yes, you are correct on sdcard but do not extract , just apply from sdcard
Sent from my SM-N950U using XDA Premium HD app
So I currently have it installed. The only issue I'm having so far is that the light on my heart beat sensor is lighting up whenever anything gets extremely close to it.
Dr_Liquid said:
So I currently have it installed. The only issue I'm having so far is that the light on my heart beat sensor is lighting up whenever anything gets extremely close to it.
Click to expand...
Click to collapse
Look in the oreo ota thread under guide, etc. section there is a fix posted their as well as some other fixes.
https://forum.xda-developers.com/showthread.php?t=3749891

Categories

Resources