****PEOPLE WHO ARE THINKING ITS SPAMMING POST THEN BE ASIDE FROM THIS THREAD****
I am using mmx a120 (4.4.2,8gb) And when i was not om custom rom then it was locking locking my 2G network in 5-6s and 3G in 4-5s and also 3G only working fine but afterwards i try to install wiko 5.0 Rom then on sp tool its shows i have to use "format all+download" So i do that and i forget to take a backup and after rom flashed then 2G is locking in 30-50s and 3G in 2-4min and no network in 3G only and when choosing 3G only then also 2nd sim getting no network and i have to restart the phone to get back 2G again !
I have searched on xda and i got a solution also but that is for micromax a210 (And mine is a120) so, if anybody have faced this issue before and now solved then reply here !
***IT WILL BE HELPFULL FOR ME TOO MUCH***
Exactly the same issue with me
I am suffering from the exact same problem. I recently flashed my mmx A120 with stock ram and just like you, I didn't make a backup of any sorts. Now I have rooted my phone and I have 2gb for app installation. Everything is good except now when I choose 3g only, the network signals instantly vanishes. It's becoming a huge problem for me as no body likes to use 2g. I mean Nobody ! If you come across a solution please do help me as well by letting me know. I will be grateful to you.
Solved Canvas A120 3G work perfect
Sushant.420 said:
I am suffering from the exact same problem. I recently flashed my mmx A120 with stock ram and just like you, I didn't make a backup of any sorts. Now I have rooted my phone and I have 2gb for app installation. Everything is good except now when I choose 3g only, the network signals instantly vanishes. It's becoming a huge problem for me as no body likes to use 2g. I mean Nobody ! If you come across a solution please do help me as well by letting me know. I will be grateful to you.
Click to expand...
Click to collapse
Hi,
Update parameters via maui 3g meta tool,
1. Open mauimeta 3g tool (run as administrator)
2. From options select connect smartphone in meta mode
3. Press reconnect
4. Switch off your phone and connect it to usb. the phone will boot up and stuck on boot logo(dont panic its normal). After sometime in the tool u will see the phone's parameters like gsm850,it means that it is successfully detected by the tool
5. Now select update parameter from the drop down menu,a popup will appear
6. click on change nvram database and select the given modem file
7. click on load from file and select the ini file
8. wait for sometime the barcode check box on below will be automatically checked and will display a message load from file completed
If you want ini configuration file of canvas a120
Suggest how to upload
rahulramavat5 said:
Hi,
Update parameters via maui 3g meta tool,
1. Open mauimeta 3g tool (run as administrator)
2. From options select connect smartphone in meta mode
3. Press reconnect
4. Switch off your phone and connect it to usb. the phone will boot up and stuck on boot logo(dont panic its normal). After sometime in the tool u will see the phone's parameters like gsm850,it means that it is successfully detected by the tool
5. Now select update parameter from the drop down menu,a popup will appear
6. click on change nvram database and select the given modem file
7. click on load from file and select the ini file
8. wait for sometime the barcode check box on below will be automatically checked and will display a message load from file completed
If you want ini configuration file of canvas a120
Suggest how to upload
Click to expand...
Click to collapse
Link
https://drive.google.com/drive/folders/1jsHzdo3_kM14N-LwjK0uk9gyIbqXKkVw
---------- Post added at 03:57 PM ---------- Previous post was at 03:54 PM ----------
rahulramavat5 said:
Hi,
Update parameters via maui 3g meta tool,
1. Open mauimeta 3g tool (run as administrator)
2. From options select connect smartphone in meta mode
3. Press reconnect
4. Switch off your phone and connect it to usb. the phone will boot up and stuck on boot logo(dont panic its normal). After sometime in the tool u will see the phone's parameters like gsm850,it means that it is successfully detected by the tool
5. Now select update parameter from the drop down menu,a popup will appear
6. click on change nvram database and select the given modem file
7. click on load from file and select the ini file
8. wait for sometime the barcode check box on below will be automatically checked and will display a message load from file completed
If you want ini configuration file of canvas a120
Suggest how to upload
Click to expand...
Click to collapse
https://drive.google.com/drive/folders/1jsHzdo3_kM14N-LwjK0uk9gyIbqXKkVw
Related
Hi guys,
Just connected the HD to a new Columbus radio system using rSAP.
First of all, I am not the one who made the .cab file needed, I simply followed the instructions on this site, and fiddled around a bit:
http://briskoda.net/superb-ii/howto...us-rns510-using-non-compatible-mobile/131709/
Here's what I did to get it working:
1) Download the .cab files from the above mentioned thread
2) Install .net compact framework 3.5
3) Install the BT_sap.cab file, it will say installation failed, but just ignore that..
4) Using file explorer, find "SAP settings" in the windows folder and click it.
5) Go to start => settings => connections => bluetooth and turn on bluetooth and make your device visible.
6) Uncheck the authentication or password box, then check the box that says "remote sim acces"
7) Connect to the radio.
That's all folks
Hope it works for you, please write your findings here.
??
hermman said:
Hi guys,
Just connected the HD to a new Columbus radio system using rSAP.
First of all, I am not the one who made the .cab file needed, I simply followed the instructions on this site, and fiddled around a bit:
http://briskoda.net/superb-ii/howto...us-rns510-using-non-compatible-mobile/131709/
Here's what I did to get it working:
1) Download the .cab files from the above mentioned thread
2) Install .net compact framework 3.5
3) Install the BT_sap.cab file, it will say installation failed, but just ignore that..
4) Using file explorer, find "SAP settings" in the windows folder and click it.
5) Go to start => settings => connections => bluetooth and turn on bluetooth and make your device visible.
6) Uncheck the authentication or password box, then check the box that says "remote sim acces"
7) Connect to the radio.
That's all folks
Hope it works for you, please write your findings here.
Click to expand...
Click to collapse
Question :
What happens to your phone after you leave your car ?
With my diamond, the phone does not login to any network after SAP disconnects , I have to reset the device or turn off/on the phone from the communication manager :-(
Otherwise , it's working fine though
Claude
Garfield1970 said:
Question :
What happens to your phone after you leave your car ?
With my diamond, the phone does not login to any network after SAP disconnects , I have to reset the device or turn off/on the phone from the communication manager :-(
Otherwise , it's working fine though
Claude
Click to expand...
Click to collapse
I've got the same problem. It went away for a while and my phone reconnected normally. But recently I had to soft reset my phone and the trouble has started all over again.
Has anyone resolved this issue? I did manage to get it working earlier (but I don't know how), so there must be a resolution to it.
hermman said:
Hi guys,
Just connected the HD to a new Columbus radio system using rSAP.
First of all, I am not the one who made the .cab file needed, I simply followed the instructions on this site, and fiddled around a bit:
Here's what I did to get it working:
1) Download the .cab files from the above mentioned thread
2) Install .net compact framework 3.5
3) Install the BT_sap.cab file, it will say installation failed, but just ignore that..
4) Using file explorer, find "SAP settings" in the windows folder and click it.
5) Go to start => settings => connections => bluetooth and turn on bluetooth and make your device visible.
6) Uncheck the authentication or password box, then check the box that says "remote sim acces"
7) Connect to the radio.
That's all folks
Hope it works for you, please write your findings here.
Click to expand...
Click to collapse
Link doesnt work for me?
nljuggler said:
I've got the same problem. It went away for a while and my phone reconnected normally. But recently I had to soft reset my phone and the trouble has started all over again.
Has anyone resolved this issue? I did manage to get it working earlier (but I don't know how), so there must be a resolution to it.
Click to expand...
Click to collapse
Same here.I installed an Energy rom and connected the phone to car, after i leave the car, the phone doesnt turns on, just need to soft reset it.
On my Touch Dual, i had installed a BT_SAP.cab file, and worked perfectly, everytime i left the car, the phone turned the network on.
Still no solution to Blackstone ?
regards
How to "attach" USB Tool and activate "Internet Sharing" automatically at startup ?
I "liberated" my XP downgraded HTC Shift and succesfully tested 3G connectivity.
The problem is that every time I restart the device, I have to:
1) enter WM
2) Attach device via USB Tool
3) Enable Internet sharing
As WM is an operating system, I guess how to do this automatically. Can I write a "bat" file to do these steps or do you have any advice to achieve this ?
Any help MUCh appreciated.
Regards.
joker197cinque said:
I "liberated" my XP downgraded HTC Shift and succesfully tested 3G connectivity.
The problem is that every time I restart the device, I have to:
1) enter WM
2) Attach device via USB Tool
3) Enable Internet sharing
As WM is an operating system, I guess how to do this automatically. Can I write a "bat" file to do these steps or do you have any advice to achieve this ?
Any help MUCh appreciated.
Regards.
Click to expand...
Click to collapse
go to wm -win start menu --settings--connection--ub to pc--enable advance network connectivity.
this should fix the problem, cheers
Unfortunately, it does not solve the problem.
I noticed that the only thing I have to do is to activate Internet Sharing.
How to do this at startup, automatically ? Has WinMo some autoexec file or startup folder ?
Thanks.
Up, please. I'm so near to surf only starting up my shift
Up. Up. Up. Up.
Yes I'm sure you can do all of that with Mort Script,
Good luck!
And don't forget to post your final results so other users would enjoy of that!
unapproachable2kx,
can you support me ?
Maybe you can just drop the shortcut for the application on the startup folder or maybe DotFred's TaskManager can help(http://www.dotfred.net/TaskMgr.htm).
wovens said:
Maybe you can just drop the shortcut for the application on the startup folder or maybe DotFred's TaskManager can help(http://www.dotfred.net/TaskMgr.htm).
Click to expand...
Click to collapse
WinMo has a startup folder (\windows\startup\) that you can create a shortcut for "Internet Sharing" inside, the problem is that you need a parameter with the shortcut to run the "Activate" conmmand in "Internet Sharing"; 'cause a normal shortcut will just run the app, then you'll have to press Activate manually (we want to automate that too); same thing for "USBTool". Unfortunaltely, I don't know the set of parameters for the shortcuts.
Or try looking for some advanced shortcut creation tools for WinMo, like in this list
http://en.handybyte.com/search/shortcut-mode/
This tool is designed in order to support our Galaxy S.
I just introduced some few features in this version; I hope to add more in the future. If you have some idea you're welcome.
INSTRUCTIONS:
-----------------------------------------------------------------------------
- Open the tool and connect your phone; You can launch the tool also if your phone is already connected.
- Supported connection is Kies one (MTP).
- Once connected tool will show you the Phone informations reading them from the phone directly (this tool doesn't use registry to retrieve data).
- Using menu "Mode > Change to Download" is possible to send your phone in download mode.
NOTE:
-----------------------------------------------------------------------------
If you would like to test the download mode without using it to upgrade, the only way to return back to Normal mode is to put battery out and insert it again.
Nodial said:
This tool is designed in order to support our Galaxy S.
I just introduced some few features in this version; I hope to add more in the future. If you have some idea you're welcome.
INSTRUCTIONS:
-----------------------------------------------------------------------------
- Open the tool and connect your phone; You can launch the tool also if your phone is already connected.
- Supported connection is Kies one (MTP).
- Once connected tool will show you the Phone informations reading them from the phone directly (this tool doesn't use registry to retrieve data).
- Using menu "Mode > Change to Download" is possible to send your phone in download mode.
NOTE:
-----------------------------------------------------------------------------
If you would like to test the download mode without using it to upgrade, the only way to return back to Normal mode is to put battery out and insert it again.
Click to expand...
Click to collapse
Great idea, going to test it
what is in there?
What's this do better than what MyPhoneExplorer does perfectly already?
Well,
You can check informations like product code without to install SGS toolbox.
By the way this was most like an exercise for me
hi i want to flash my htc touch dimond 2 but when in tri colour mode i conect it to pc . pc giving error usb device not recognised what shoud i do for it becous whithout contecd phone to pc i not able to flash it.
262068 said:
hi i want to flash my htc touch dimond 2 but when in tri colour mode i conect it to pc . pc giving error usb device not recognised what shoud i do for it becous whithout contecd phone to pc i not able to flash it.
Click to expand...
Click to collapse
to resolve it, try installing the ms ActiveSync (for Win XP) or WMDC (Vista and Win 7) on your computer !
ActiveSync ~ http://www.microsoft.com/en-us/download/details.aspx?id=15
WMDC ~ http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=14
i am using windows 7 and i install your given link driver but problem still same any other solution thanks for help dear
to flash the rom does not need to bring the device into botloader, simply connect your phone to your computer and wait until activesync /Windows Mobile Device Center admit and then run instead of .exe file (CustomRUU) at the rom
first thanks for help bro and in this phone when we switch it on its show htc window then restart so tell me how i flash it its not conected to pc in this condition . i do soft and hard reset on this phone already .give me full prosses link .
262068 said:
first thanks for help bro and in this phone when we switch it on its show htc window then restart so tell me how i flash it its not conected to pc in this condition . i do soft and hard reset on this phone already .give me full prosses link .
Click to expand...
Click to collapse
I think, you still can Flash ROM at your device using the Storage Card ! follow the guide at here ~ http://forum.xda-developers.com/showpost.php?p=7033683&postcount=3
thanks bro i understand all way to flash i download file and put it in blank mmc root dir with change name after that i press down volume key + power key phone start in tri color screen but after that its showing Loading... on screen and nothing more i wait one hour in this condition but nothing happen only loading showing .so what is problem or mistak i do in flashing tell me
262068 said:
thanks bro i understand all way to flash i download file and put it in blank mmc root dir with change name after that i press down volume key + power key phone start in tri color screen but after that its showing Loading... on screen and nothing more i wait one hour in this condition but nothing happen only loading showing .so what is problem or mistak i do in flashing tell me
Click to expand...
Click to collapse
previously make sure your MicroSD has formatted to Fat32! to format a memory card you can use the SD Formatter
open your file rom with winrar, Drag and drop ruu_signed.nbh file to a folder on computer then rename ruu_signed nbh. file to TOPAIMG.nbh and copy to memory card
plese bro give me a working rom link for this htc touch dimond 2 T5353 phone and thanks for all this help. i tried in this fourm but not able to find which is working perfect or not .
and i use 2gb card is thair any probem with card capacity
262068 said:
plese bro give me a working rom link for this htc touch dimond 2 T5353 phone and thanks for all this help. i tried in this fourm but not able to find which is working perfect or not .
and i use 2gb card is thair any probem with card capacity
Click to expand...
Click to collapse
no problem with capacity Card
Maybe you could try with the official rom http://shipped-roms.com/index.php?category=windows%20mobile&model=Topaz
bro in your link all file in exe extention how can i use that and when run in exe mode give some error in setup error message written in other language so i not understand any suggestion thanks bro
262068 said:
bro in your link all file in exe extention how can i use that and when run in exe mode give some error in setup error message written in other language so i not understand any suggestion thanks bro
Click to expand...
Click to collapse
You can view the contents of the file and extract it using WINRAR
I Download 5 rom files when i format card using fat in this condition its showning after tri screen looding then no image found and return to tri screen . and when i format card using fat32 its showing loading then chacking then not allow then return to tri screen whats happen bro tell me thanks.
hi bro whats happen . give me any idea
bro my problem still not solve i not able to flash my htc diamon2
262068 said:
bro my problem still not solve i not able to flash my htc diamon2
Click to expand...
Click to collapse
Can attach screenshot your device at the time of the bootloader mode ??
hear is video bro i format mmc with fat32 and fat (same result in both) then put rom file in root dir with change name as you given in this video after tri colour say loding then no image fond then return to tri colout screen back
say somthig bro
have you tried using another memory card ??
Is not clear what SPL you have.
Loading then not allow means that ROM is for other country.
Also means that you don't have Hard SPL.
You can recover only with ROM for what country ID have your device.
HTML:
You can recover only with ROM for what country ID have your device
how can i find country id in my set. in back panel of set i found made in tiwan is thair any solution now
tell me something my problem not solve
If your device the last time before brick still using the embedded operating system (ROM) default from the manufacturer, then you get to know country ID via specifications Shipped ROMs / official ROM at W I K I
Hi Everyone!!!!
So you have a honor 3c that works as a paper weight cuz you were experimenting around and got it hard bricked and now you dont see a way to get your phone back... right? well no need to worry
GETTING SPFT TO BUILD A CONNECTION WITH YOUR PHONE
Now here are the prerequisites that u guys need :
your honor 3c
a laptop or computer with nessecary drivers installed
patience
a brain
ok so now that you have all that lets get into it
first you need to download this : mega .nz/#F!4HhnAJhY (remove the space between mega and nz for the link to work xda was not letting me put a url cuz am new here )
now :
1. open sp flash tool u find inside this folder
2. load the scatter file
3. and recovery will be loaded into the spft
4. now press download button and connect the phone without the battery inserted
5. wait for green circle and after that disconnect your phone
voila now ur phone wont disconnect again n again but dont jump now we still have alot to do
UNLOCKING FOR REFLASHING
Now we need to unlock your bootloader so that we can reflash the firmware
so first u need to download this: mega .nz/#F!QGBgQTBR (remove the space between mega and nz for the link to work xda was not letting me put a url cuz am new here )
now u will open the spft from the previous folder again
now :
1. Click “Scatter-loading” and select “MT6582_Android_scatter” file placed inside “Honor3CBootUnlock” folder.
2. After that, click Window menu and check “Write Memory”. A new tab named Write Memory should appear.
3. In Write Memory tab, click Open Raw Data and select “preloader_huawei82_wet_jb5.bin”.
4. Set Memory Setting to “EMMC”, Beginning Address to “0x800” and Container Length to “0x1B0EC”. Finally click Write Memory button,SP FlashTool is waiting for connection, now connect your phone to computer using USB cable, WITHOUT the battery inserted.
5. GREEN circle will be displayed if the download succeeded.
6. Now DISCONNECT the USB cable from your phone.
Nearly done
ok so now that we have done all that you can flash your desired firmware
i can upload the one i flashed lemme know if you want that ................. hit that thanks button if i helped :good: :good: :good: :good:
Decrpty Key of File?
Asalam-U-Alaikum , bro the mega file needs a decrypt key. Kindly tell me what is it.