hi i want to flash my htc touch dimond 2 but when in tri colour mode i conect it to pc . pc giving error usb device not recognised what shoud i do for it becous whithout contecd phone to pc i not able to flash it.
262068 said:
hi i want to flash my htc touch dimond 2 but when in tri colour mode i conect it to pc . pc giving error usb device not recognised what shoud i do for it becous whithout contecd phone to pc i not able to flash it.
Click to expand...
Click to collapse
to resolve it, try installing the ms ActiveSync (for Win XP) or WMDC (Vista and Win 7) on your computer !
ActiveSync ~ http://www.microsoft.com/en-us/download/details.aspx?id=15
WMDC ~ http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=14
i am using windows 7 and i install your given link driver but problem still same any other solution thanks for help dear
to flash the rom does not need to bring the device into botloader, simply connect your phone to your computer and wait until activesync /Windows Mobile Device Center admit and then run instead of .exe file (CustomRUU) at the rom
first thanks for help bro and in this phone when we switch it on its show htc window then restart so tell me how i flash it its not conected to pc in this condition . i do soft and hard reset on this phone already .give me full prosses link .
262068 said:
first thanks for help bro and in this phone when we switch it on its show htc window then restart so tell me how i flash it its not conected to pc in this condition . i do soft and hard reset on this phone already .give me full prosses link .
Click to expand...
Click to collapse
I think, you still can Flash ROM at your device using the Storage Card ! follow the guide at here ~ http://forum.xda-developers.com/showpost.php?p=7033683&postcount=3
thanks bro i understand all way to flash i download file and put it in blank mmc root dir with change name after that i press down volume key + power key phone start in tri color screen but after that its showing Loading... on screen and nothing more i wait one hour in this condition but nothing happen only loading showing .so what is problem or mistak i do in flashing tell me
262068 said:
thanks bro i understand all way to flash i download file and put it in blank mmc root dir with change name after that i press down volume key + power key phone start in tri color screen but after that its showing Loading... on screen and nothing more i wait one hour in this condition but nothing happen only loading showing .so what is problem or mistak i do in flashing tell me
Click to expand...
Click to collapse
previously make sure your MicroSD has formatted to Fat32! to format a memory card you can use the SD Formatter
open your file rom with winrar, Drag and drop ruu_signed.nbh file to a folder on computer then rename ruu_signed nbh. file to TOPAIMG.nbh and copy to memory card
plese bro give me a working rom link for this htc touch dimond 2 T5353 phone and thanks for all this help. i tried in this fourm but not able to find which is working perfect or not .
and i use 2gb card is thair any probem with card capacity
262068 said:
plese bro give me a working rom link for this htc touch dimond 2 T5353 phone and thanks for all this help. i tried in this fourm but not able to find which is working perfect or not .
and i use 2gb card is thair any probem with card capacity
Click to expand...
Click to collapse
no problem with capacity Card
Maybe you could try with the official rom http://shipped-roms.com/index.php?category=windows%20mobile&model=Topaz
bro in your link all file in exe extention how can i use that and when run in exe mode give some error in setup error message written in other language so i not understand any suggestion thanks bro
262068 said:
bro in your link all file in exe extention how can i use that and when run in exe mode give some error in setup error message written in other language so i not understand any suggestion thanks bro
Click to expand...
Click to collapse
You can view the contents of the file and extract it using WINRAR
I Download 5 rom files when i format card using fat in this condition its showning after tri screen looding then no image found and return to tri screen . and when i format card using fat32 its showing loading then chacking then not allow then return to tri screen whats happen bro tell me thanks.
hi bro whats happen . give me any idea
bro my problem still not solve i not able to flash my htc diamon2
262068 said:
bro my problem still not solve i not able to flash my htc diamon2
Click to expand...
Click to collapse
Can attach screenshot your device at the time of the bootloader mode ??
hear is video bro i format mmc with fat32 and fat (same result in both) then put rom file in root dir with change name as you given in this video after tri colour say loding then no image fond then return to tri colout screen back
say somthig bro
have you tried using another memory card ??
Is not clear what SPL you have.
Loading then not allow means that ROM is for other country.
Also means that you don't have Hard SPL.
You can recover only with ROM for what country ID have your device.
HTML:
You can recover only with ROM for what country ID have your device
how can i find country id in my set. in back panel of set i found made in tiwan is thair any solution now
tell me something my problem not solve
If your device the last time before brick still using the embedded operating system (ROM) default from the manufacturer, then you get to know country ID via specifications Shipped ROMs / official ROM at W I K I
Related
Hello
I just did the following :
download the files from www.carrierdevices.com.au for Qtek 101 update
"Qtek 1010 Upgrade
(22102003-190723)-RSUv1.15_(GPRS_T32500_ENG).exe
File Contents
• CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
• Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
"
When the process began there was an error asking to press OK for restart.
After restarting device in the boot sequence ( when logo is diplayed) there are no informations about the ROM. Just Radion version is diplayed and that is the new version one (3.25)
Also on the display there is no start icon and I cannot use the display because it seems to be decalibrated completly.
Very Important : When I try to connect to Activesync after a while it telling me that the device is not a smartphone or a pocket PC and cannot be connected. So I cant use any program to try to upgrade again.
What to do ?
Please try to give examples and link to download files in order to fix my device.
Thanks in advance
Silviu C.
Hi ...
If you still can get to the boot loader screen (power button + soft reset) and it displays "GSM OK", that means there is a good chance that the flash ROM is not damaged.
You can either put the ROM and RSU files on SD card through a card reader (.nbf files) or to get a valid SD backup for CE + Radio from any working XDA and use the boot loader screen to flash your device again.
Good luck ...
thanks, where I can get some files?
Thank you for your replay,
It seems to be ok cause i can upload a new CE in SD format to the device. ROM was build in the kithcenROM from yorch.net.
It still not working cause perhaps I need the file containing Radio and CE as well in SD format.
Do you know where I can get it ?
I dont think I can get another device to read the files on the SD.
Many thanks,
Silviu C.
I 'm not sure which stage you are stuck with now ... if you can put CE image on SD card and flash it using the boot loader, that means you can boot your XDA and flash the RSU through a normal EXE file from yorch.net .... if this is not the case then you most propably have the wrong file format on the SD card.
Give more details plz
present situation
I am at the edge of disperation.
Steps of what I did :
1. Back up Boot and CE to SD and save them to HDD.
2. Build a CE from Yorch.net in nb1 format and write it to SD with an adaptor.
3. Flash the device with that specific file ( was just CE , not including bootloader)
Now, my pocket is like that:
It cannot been powered from the power button
It start when plug in the charger
I cannot go in bootstrap mode ( when procedure for activating is made I just got a small red flash from the LED)
I have to mention that I choose from the yorch options :" lock butons except power when the device is turned off "
So, now I cannot use the SD for try another flash image.
I cannot use activesync because it cannot recognize the device. Somthing is wrong in the header of the authorising string or something like that.
When I plug the USB cable, activesync is starting but after 10 secs a pop up telling me that the device cannot be recognize, it is not a smartphone or pocket pc.
I am stack.
Thank you
Silviu C.
another question
I have another question:
Is there anywhere - in situation that the problem with boostrap will be solved somehow - full flash containing both radio and CE ?
Thank you,
Silviu C.
some little success
I have suceded by entering in bootrap mode !!
It telling me that I have GSM ERROR
What to do?
IS there any way I can get a full flash for Qtek with radio and OS as well?
Thanks,
Silviu C.
In the boot loader screen, try to press the calendar button ... it should give you the GSM menu. Select "Reset" or "Turn off" and do a soft reset
Plz do NOT try band switching or "Calib/debug"!
It sounds like a failed radio stack upgrade, you can try copying the RSUpgrade.sa.CAB file to your SD card then run it from there.
You can get the RSUpgrade.sa.CAB file by using WinZip to extract it from the RSUv1.15_(GPRS_T32500_ENG)[1].exe file.
HTH
dear all friends
i have qtek pw10a1 it hange in blue screen qtek ise under screen
g32s54
a3.25.01
3.18.04
and wheni press power and rest isee wallby boot loader v5.22
gsm ok
so how can islove this problem and please tell me how can i do hard rest .
and can i upgrade it with 3.20.06_ENG.exe if yes please tell me steps .
first tell me how can i do hard rest.
where is help iam waiting .
please how can i do hard rest
Hard Reset can be done by unscrewing your pen and sticking twice in the little hole near the earphone connector. But entering bootloader (power button and soft reset) ha teh same effect.
You can not use the exe file for flashing directly, because flashing via exe file requires a ActiveSync connection between PC an Phone...
For flashing read this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
where is help iam waiting .
Click to expand...
Click to collapse
There are just a few hours between your postings. This is not a chat and all useres here are doing their job as good as they can and without getting money for it. So be thankful that you get any help here....
Stefan
thanks for your replay and iam sorry for two post which i wrote i do as you tell me now iwant to flash it but i dont know how can i put it in flash mode i put it in gsm ok but computer cannot see it do inedd any driver so please replay soon
his link describe how you put a rom on a sd card which automaticly
update the device when it's in bootloader mode (the thing you call gsm ok mode)
friend when i put it in gsm ok my computer cant see itit see )unkwon so how can i put it in flash mode please help me in his link there is no way to put it in flash mode
If the file is writtten in correct format on the SD Card and you enter the bootloader with the insert SD-Card, it will go automaticly in Flashmode.
If that happend not on your device, the ROM is not written correctly on the SD Card.
Stefan
at no point in the linked page do your phone have to be detected or comm in any way with the computer
when i press copy it saye please connect your xda to active syinc
how can i connect it to active syice and its hange in qtek. my pc cannot see it
please if any one can tell me how can i do Hard Reset becuase i dont understand (Hard Reset can be done by unscrewing your pen and sticking twice in the little hole near the earphone connector) i think its soft rest and i want hard rest
there is two hole near ear phone connectre do you want me topress it in the same time for secondes i pressed it but same problem
The way to do a hard reset is to remove the power of the battery. This is done by the small hole on the side of the earphone connector, marked with a battery sign.
But this will not help you. You require a SD-Card and an SD-Card writer to flash a new ROM on your device. All have already said on the first postings.
Stefan
friend tell me how can i copy rom update to sd card with boot
Already done. See the link to wiki.....
Stefan
it aske me for nbi files and i dont have it so from where i can download it .
itry rest+power button then i go to flash tools and i select ce os+boot to sd and i copy it completed then i do rest i go to sd download and i download it but same problem .
so from where i can nb1 files
You can use either nb1 or nbf files. You can extract tgat file from any existing ROM in EXE-Format (using winzip) or download the nbf format from the Romkitchen for example....
Stefan
LumpiStefan thanks 10000 you are agood friend phone now back to live thanks
for all your help .
please where can i found ararbic rom thanks
You´re welcome....
As much as ii know there is no Arabic ROM available. Just english, french, spanish, iatlian, german and one chinese version.....
If you take a look at the wiki page, there can you find all available ROMs that are known to me....
Stefan
Hi, I tried to install the Artemis Touch 4.02 Full with 4 sided cube ROM on my HTC 3301 (same that 3300) but when I try to install the mobile has restarted when the bar progress stay on 3% and don't work... please help me, my mobile don't work more, and I don't know what to do!
Thanks
3% is a classic... did you use uspl first? In this case it means that you have to perform step1.bat first, then step2.bat. Make sure step 1 went well, then try step2 again.
Gwystyl said:
3% is a classic... did you use uspl first? In this case it means that you have to perform step1.bat first, then step2.bat. Make sure step 1 went well, then try step2 again.
Click to expand...
Click to collapse
But when I execute STEP 1 I see this message:
"No Device Connected" -> "Would you like to try copying again?"
And don't work... My mobile only enter in bootload (Red, Green and Blue Screen).
The Active Sync don't connect in mobile on bootload screen =(
What I do?
Do you have a SD Card >2GB in your Slot?
Then removed it and try it again ... There is a known problem with flashing while a sd card >2GB is connected (you have to install the sdhc driver after install in order to use your sd card ... maybe its included in the rom)
Uncle_CM said:
Do you have a SD Card >2GB in your Slot?
Then removed it and try it again ... There is a known problem with flashing while a sd card >2GB is connected (you have to install the sdhc driver after install in order to use your sd card ... maybe its included in the rom)
Click to expand...
Click to collapse
No, I removed the memory card before install... I trying to use the mtty, but I don't have successfull too =(
I read on web that I can put a ELF0IMG.nbh file on memory card and power up on bootload with the card to install the ROM... it works?
Thanks
hmm, i dont know ... but if theres a tutorial give it a try
which USPL Version is shown when you try to start your phone?
Uncle_CM said:
hmm, i dont know ... but if theres a tutorial give it a try
which USPL Version is shown when you try to start your phone?
Click to expand...
Click to collapse
IPL 3.16.0001
SLP 3.16.0000
GSM 03.06.90
OS 10.0.0.10
Okay, than you could try this "by hand":
http://forum.xda-developers.com/showthread.php?t=311403
This worked for my O2 XDA Orbit (HTC Artemis) ... it could be, that youre device isnt supported ... it could be different as a P3300?!
Uncle_CM said:
Okay, than you could try this "by hand":
http://forum.xda-developers.com/showthread.php?t=311403
This worked for my O2 XDA Orbit (HTC Artemis) ... it could be, that youre device isnt supported ... it could be different as a P3300?!
Click to expand...
Click to collapse
Thanks, but I can't sync my phone because I can only enter in bootload mode =/
I tried puting the ARTEIMG.nbh file into memory card, but only give the message: "Invalid Certificate".
Thank you for try to help me, but I don't know what I can to do! I think that my mobile is dead forever =/
So, you can't turn on your device anymore?
Did you tried a Hardreset?
Uncle_CM said:
So, you can't turn on your device anymore?
Did you tried a Hardreset?
Click to expand...
Click to collapse
Yes, I can turn on the device, but don't start the OS, stay on SPL/IPL... screen, and I can enter in BootLoad screen too (Red/Green/Blue screen).
This sounds bad .... the last thing i know is to do a hardreset:
when device is switched on
1. press left and right softkey together and hold ... then stick the stylus in the RESET hole and remove it (but still press the keys)
2. after a short reboot you should see a message with further instruction ... now you can release the softkeys and follow the instructions ...
So, thats the last thing i get in mind ... sorry ...
people!
read wiki sometimes...
I put the file ARTEIMG.nbh to SD Card (FAT32), the ROM that I'm using is "Artemis 4.02", but on manual (http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing) says that I need to extract the NBH, but when I try to extract I have a error, then I've copied the file to SD Card, but when I enter on bootload in screen show me "Invalid Certificate" and I don't know what I do! Please help me... my mobile is dead
exact same problem..... has any one got any solution for this ?
Same problem also for me... have anyone found a solution for that???
Thank you all
Same problem with a number of ROM's. The only ROM I have been able to flash is an old wm5 (ART_HTCDAN_11240301_026790_DAN_SHIP). And I think it is an older version than the one installed when I bourght the device
My p3300 refuses to do any flash from win7, sometimes it can't see the device and sometimnes it reaches 2-3% of the transfer before it stops.
mortuis said:
Same problem with a number of ROM's. The only ROM I have been able to flash is an old wm5 (ART_HTCDAN_11240301_026790_DAN_SHIP). And I think it is an older version than the one installed when I bourght the device
My p3300 refuses to do any flash from win7, sometimes it can't see the device and sometimnes it reaches 2-3% of the transfer before it stops.
Click to expand...
Click to collapse
Hi!
Flash USPL first,after that you can flash any ROM into your device.
BR
Szig
probably error 260
mortuis said:
Same problem with a number of ROM's. The only ROM I have been able to flash is an old wm5 (ART_HTCDAN_11240301_026790_DAN_SHIP). And I think it is an older version than the one installed when I bourght the device
My p3300 refuses to do any flash from win7, sometimes it can't see the device and sometimnes it reaches 2-3% of the transfer before it stops.
Click to expand...
Click to collapse
type error 260 in search you will be directed to pages where the sollution is, you must change something in your pc in windows mobile center
show invalid certificate me on
SPL 1.25.0001
I have a HTC ELF 0300 it is stucking in the tri colour screen with the following
IPL: 2.26.0002
SPL:2.28.0000
i have followed the advice i found on this forum of flashing the ROM but when i try the rom update utility it comes up with error 270 about the image also i tried the mtty process but it wont open the usb port
i tried flashing the SD Card but it then says "Invalid Certificate"
i'm a total loss and totally stuck..
any help appricated
Have you really read this sticky thread http://forum.xda-developers.com/showthread.php?t=406721 before flashing ?
Have you used "search" function with f.e. "stuck in bootloader" before posting ?
If not, please do and you'll find very useful solutions
i have read the theads over and over again and finally worked out mtty and worked out my phone is
elf0300
tmob050
it's still in tri colour mode yet i cant find a rom for it...
i tried the nbh file flashing to the memory card
but no luck....
heelllp
Do you know if you have Elf or Elfin?
It is essential for flashing original Rom Elf: http://forum.xda-developers.com/showpost.php?p=2045325&postcount=2
Elfin: http://forum.xda-developers.com/showpost.php?p=2045051&postcount=1
i haave an elf (p3450) well thats what it says on my box
i cant find the orginal rom for this and i'm totally stuck
any help is greatrully recived
also i have tried CID unlocking it so i can put custom roms on it but my computer wont active sync when the phone is connected through the USB port...
Also, what did you do to get your phone stuck in bootloader in the first place?
my brother did it to my phone before i'd even had chance to use it , and i don't know what he did.....sorry x
Try this and follow the instructions exactly http://forum.xda-developers.com/showthread.php?t=347700 and report pls
i tried this yesterday at first when i pressed enter i didnt get >cmd (which is what happening now)
then when i do get it eventually after many tries it sasys
cmd55 or something failed
and stays on 0% on a gray screen
sorry if i sound stupiud.
Ok
First you connect your device, then right click on active sync icon on your computer, chose connection settings and change according to the instructions then continue with mtty.exe
i have done this
when i press enter i dont get anything come up....
yesterday i managed to get it up though and just stayed gray screen at 0%
Try again a few times making sure you didn't overlook any detail.
I just found this http://forum.xda-developers.com/showpost.php?p=3395787&postcount=155 possibly mtty version doesn't work
2- Another possibility is unbricker rom http://forum.xda-developers.com/showthread.php?t=446242
3- gold card method (the links are dead so you should pm Dsixda)
Flash from the SD card:
ELF0IMG.nbh on a FAT32 filesystem, complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
1. Format microSD card from your computer.
2. Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
3. Rename the .NBH file to ELF0IMG.nbh and copy it to the root folder of your microSD card.
4. With microSD card inserted in the phone, start the bootloader (the bootloader is invoked by hold down the camera button and reset device with the stylus).
5. Confirm flashing on screen by pressing the power button (or the volume slider down).
6. Flashing might hang after some time but this is normal. Just wait.
Will try now and keep u updated
manny thanks x
Follow the instructions until you get cmd only, then return to the tutorial to continue
Good luck
Just an update
i downloaded the nbh file you sugested and tried both
1) flashing from the SD card by renaming file - when i do this is says checking sd contents then goes back to my bootlooder screen
2) running the romupdateutility.exe with the nbh file in the same folder it goes through then i get error 294 incorrect vender
i am unable to pm Dsixda about the gold card
i have no idea what else to try
ps: when running mtty i still get a gray screen then the bootloader screen.
Sorry to hear this, I'm out of ideas. Just some details not to miss:
try a hard reset
writing "ELF0IMG.nbh" (elf zero img and not elf o img)
google for mtty and download a few versions
Wait for an answer from Dsixda for gold card if you can't find your original rom
Creating your GoldCard
I don't remember well the procedure but you can try the following:
If you have access to a working pda or a working GPS device - PNA which is powered by WM (even modified) then you have to follow these steps:
Download this package and save it in your C:\ drive.
Run it.
(it will extract all the necessary files in C:\itsutilsbin (folder) and it will start the setup of Perl)
When the Perl - installation is finished run Perl Package Manager from Windows Start Menu.
Add repositories.
Name: itsme
Location: http://www.xs4all.nl/~itsme/projects/perl/ppm
Name: theoryx
Location: http://theoryx5.uwinnipeg.ca/ppms/package.xml
(HowTo: run Preferences from the Perl Package Manager menu and switch to the repository tab)
After database synchronization install these packages:
Crypt-DES
XdaDevelopers-NbfUtils
(HowTo: at the main window of Perl Package manager find those packages, mark them for install (the icon with green plus, next to the search bar) and run marked action(green arrow icon))
Format the sd card(FAT32) and insert it in a working pda.
Connect the working pda to the pc , wait to sync and run psdread.bat from C:\itsutilsbin.
Find an official rom from here with a ModelID which matches your device's one
Example: If your pda is an Elfin and you have ModelID ELF030000 then get the below rom from that thread.
RUU_Elfin_TMO_NL_2.26.114.52_4.1.13.52_03.08.90_BL UE_Ship.exe (T-MOBILE)
Device: ELF030000
CID: T-MOB003
Version: 2.26.114.3
Language: NLD
Click to expand...
Click to collapse
Extract the RUU_Signed.nbh, rename it to ELF0IMG.nbh and copy it to the sd card.
Fully charge your battery, insert the sd card to your pda, enter bootloader and flash from memory card
(Confirm flashing on screen by pressing the power button (or the volume down button)).
If everything went ok then you can use a HardSPL or a USPL to CID Unlock your phone and update the rom with one of your choice.
If you don't have a working pda use a card reader - Ubuntu (even from a LiveCD) and QMAT are required
Regards!
i don't have a working pda to use :-( the only pda i have is my bricked one :-(
buncie2010 said:
i don't have a working pda to use :-( the only pda i have is my bricked one :-(
Click to expand...
Click to collapse
There is a way to use a card reader instead.
Using Ubuntu LiveCD and QMAT
ps:I wonder how did the wiki entry got erased?
Dsixda and all the members who worked on this had done a great job and it's really annoying that all their work was lost.