Database Users

how to reset honor 4x from cm13 to emui4 and soft bricked

your pc should have install adb and fast boot drivers imp . and pda net driver just search on google . and install it . after that follow the steps:good::good:
very simple for honor4x Che1-L04 indian
1.your phone shoud be unlock boot loader imp
2.reboot your phone in to fast boot mod
3.just use HuaweiUpdateExtractor.
just go to this link
http://www.mediafire.com/file/z8436c56ccy69fb/HuaweiUpdateExtractor_0.9.9.3_Setup(2).zip
and download it .
4.in update extractor
select your firmware file . *Honor 4X_Firmware_Che1-L04_Android 6.0.1_EMUI 4.0_C675B511_India_Flipkart * from your pc where you have save it
Select all files and right click. Choose Extract selected from the context menu.
Choose the ouput folder and press OK. Or just right click on the list and select Extract all, choose the output folder again and press OK.
5.download flash all tool from below link
http://www.mediafire.com/file/rcw8tojyhlh6wqk/FLASH_ALL.zip
6. extract the flash all tool and Paste all the extracted flash file from the huwei updateextractor in the same folder
just reboot your phone in to bootloader mode and just click flash all option . thats it .
after when your phone is rebooted . thats it :good::good::good::laugh:

Reflashing xiaomi a1 - question

I am noob at this, I need to reflash my current version 8.0 Oreo but i never done it, can someone explain me step by step what I must do.

Loco56 said:
I am noob at this, I need to reflash my current version 8.0 Oreo but i never done it, can someone explain me step by step what I must do.
Click to expand...
Click to collapse
I'm assuming you're talking about the original stock rom?
Download the Android SDK Platform-Tools; (I'm assuming you're using Windows)
1. Click -- SDK Platform-Tools for Windows
2. Unzip and put the SDK Platform-Tools for Windows anywhere you like.
https://developer.android.com/studio/releases/platform-tools.html
On the Mi Community forum link below you'll download the Oreo ROM;
Click the link below: Fastboot ROM | 1407M |8ea503201bb0b594e02e5ed2bf6dea09
http://c.mi.com/forum.php?mod=viewthread&tid=657275&extra=page=1
You need an Archive Tool like 7-Zip to extract the rom. Make sure in the 7-Zip options you have tar and tgz checked, so you can extract it.
https://www.7-zip.org/
.tgz is a tar archive with gzip compression added to it. When you click to extract it the first time, you'll now end up with a .tar archive, click to extract it again, and you'll finally have the contents of your rom, in two directories called;
tissot_images_8.1.10_20180110.0000.00_8.0_8ea503201b
tissot_images_8.1.10_8.0
Copy the contents of tissot_images_8.1.10_8.0 to your C: drive. Make sure you copy the contents, not the directory itself to C:
On MIUI forum read the Steps 1, 3, 4, 5 SKIP STEP 2! Be sure to download the Mi Flash Tool, Step 1.
http://en.miui.com/thread-807252-1-1.html
Step 3 on the MIUI forum, place the phone in Fastboot Mode.
Next go to the directory you extracted the Android SDK Platform-Tools, in that window hold down the Shift-key and Right-Click, when the menu pops up, click on Open command window here. Now you have a command prompt open.
1. Type in the command prompt - fastboot.exe devices
If successful you'll see a number displayed in the prompt for your phone.
2. Next you need to unlock the bootloader so type - fastboot.exe oem unlock
Now you're ready to flash it.
Open the Mi Flash Tool, make sure to the right of where it says select you put the path, which is C:\
Now click refresh and it should show the device like the screen shot on the MIUI forum, and then make sure clean all and lock is checked on the bottom right of the Mi Flash Tool.
Now click flash and wait...
Enjoy

Is this rom same
http://en.miui.com/getrom-333.html?m=yes&mobile=2

A Myth said:
http://en.miui.com/getrom-333.html?m=yes&mobile=2
Click to expand...
Click to collapse
Go to both URLs, copy the download links, paste them in Notepad and compare them...
http://c.mi.com/forum.php?mod=viewthread&tid=657275&extra=page=1

[guide]working downgrade method (emui 8 to emui 5.1) for honor 8 pro

Hi,
So many of us are not happy with the oreo rom of Honor 8 Pro (C675). Those who looking forward to downgrade from Oreo to nougat just follow the steps. (This method is tested and is working. I just finished downgrading and is working perfectly fine. I just want to share this method with you guys. Also this i my first post in the forum. Some steps have been copied from a previous post by xfact)
Things you might need :-
>>A computer
>>At least 8GB memory card.
>>An unlocked bootloader. (you can relock it later)
>>Download the necessary files here :- [The Dload file was previously shared in this forum by xfact, but the link is not working now. Fortunately, I downloaded the file while it was available and I am providing the link to the google drive backup.]
REMOVE THE *** IN BETWEEN THE URL'S
(a) Dload File --- https***://***drive.google.com/open?id=1ZpOoPZ3dEn86lEh0PwlZP0W2LShM-BnT
(b) Recovery File --- https***://***drive.google.com/file/d/1qiP4k5HtJ3VR5l9ac8FnpxrwryIxu-pV/view?usp=sharing
(c) ADB platform tools --- https***://***drive.google.com/open?id=1vu-awRNjH3B9os5MuHGSlu-ca6zNv10V
>>Unzip the above-mentioned Dload file, then go to the folder, then software>dload folder and unzip the 'SDupdate_Package.tar.gz' with 7-Zip. It will extract another archived file called 'SDupdate_Package.tar'. Now unzip that too with 7-Zip and you will get a folder called 'dload' again.
>>Now take an SD card with at least 8 Gb of space, format it to exFAT. Paste the last 'dload' folder and all its contents at the root directory of that SD card. Put it into your phone.
>>To unlock the bootloader, just log into---- https***://***bit.ly/2uEEvdj
This is their chinese website, use translator in chrome to read in english.
Fill up the necessary details and you will get an unlock code for your device.
>>Follow the necessary steps to unlock your bootloader from here :- https***://***bit.ly/2uEM1F8
>>After unlocking the bootloader, your phone will be factory reset. When the phone boots up again, go to settings and enable USB Debugging from devoloper options.
>>Unzip the platform tools zip file and copy the Recovery file into that folder.( you have to unzip the platform tools file while unlocking the bootloader. Just copy the recovery image to that folder)
>>Holding the SHIFT key, right click any empty spaces in the folder and from the menu that appears, select "Open command window here"
>>Connect your handset. Ensure USB debugging prompt appeared as seen in the bootloader unlocking tutorial.
>>In the command window type the following commands :-
1. adb devices
(this is to make sure your device is connected properly)
2.adb reboot bootloader
(to put your device into fastboot mode)
3.fastboot flash recovery_ramdisk DUK-RECOVERY_RAMDISK_NoCheck.img
(to flash the recovery image)
4. fastboot reboot
>>When the device boots up, go to the dialer, type *#*#2846579#*#*
->Click on Software Upgrade -> SDcard upgrade->confirm.
Your phone will recognise the memory card with dload file in it. It will flash the rom. It will get stuck at 99% and shows error. Dont worry, just select reboot system option that appears on the screen.
You will be on the Nougat Rom
To relock the bootloader--
>>Again you have to enable USB debugging from devoloper options>>open command window from the platform tools folder>> execute the commands 1 and 2.
Then type the following command :-
fastboot oem relock *unlock key*
(replace *unlock key* with your unlock key used for bootloader unlock)
YOUR DEVICE WILL BE ON NOUGAT ROM WITH LOCKED BOOTLOADER
As this is my first post, kindly ignore the errors. Sorry if this lengthy post made any confusion. Hope this is helpful to all of you.

akhilbs94 said:
Hi,
So many of us are not happy with the oreo rom of Honor 8 Pro (C675). Those who looking forward to downgrade from Oreo to nougat just follow the steps. (This method is tested and is working. I just finished downgrading and is working perfectly fine. I just want to share this method with you guys. Also this i my first post in the forum. Some steps have been copied from a previous post by xfact)
Things you might need :-
>>A computer
>>At least 8GB memory card.
>>An unlocked bootloader. (you can relock it later)
>>Download the necessary files here :- [The Dload file was previously shared in this forum by xfact, but the link is not working now. Fortunately, I downloaded the file while it was available and I am providing the link to the google drive backup.]
REMOVE THE *** IN BETWEEN THE URL'S
(a) Dload File --- https***://***drive.google.com/open?id=1ZpOoPZ3dEn86lEh0PwlZP0W2LShM-BnT
(b) Recovery File --- https***://***drive.google.com/file/d/1qiP4k5HtJ3VR5l9ac8FnpxrwryIxu-pV/view?usp=sharing
(c) ADB platform tools --- https***://***drive.google.com/open?id=1vu-awRNjH3B9os5MuHGSlu-ca6zNv10V
>>Unzip the above-mentioned Dload file, then go to the folder, then software>dload folder and unzip the 'SDupdate_Package.tar.gz' with 7-Zip. It will extract another archived file called 'SDupdate_Package.tar'. Now unzip that too with 7-Zip and you will get a folder called 'dload' again.
>>Now take an SD card with at least 8 Gb of space, format it to exFAT. Paste the last 'dload' folder and all its contents at the root directory of that SD card. Put it into your phone.
>>To unlock the bootloader, just log into---- https***://***bit.ly/2uEEvdj
This is their chinese website, use translator in chrome to read in english.
Fill up the necessary details and you will get an unlock code for your device.
>>Follow the necessary steps to unlock your bootloader from here :- https***://***bit.ly/2uEM1F8
>>After unlocking the bootloader, your phone will be factory reset. When the phone boots up again, go to settings and enable USB Debugging from devoloper options.
>>Unzip the platform tools zip file and copy the Recovery file into that folder.( you have to unzip the platform tools file while unlocking the bootloader. Just copy the recovery image to that folder)
>>Holding the SHIFT key, right click any empty spaces in the folder and from the menu that appears, select "Open command window here"
>>Connect your handset. Ensure USB debugging prompt appeared as seen in the bootloader unlocking tutorial.
>>In the command window type the following commands :-
1. adb devices
(this is to make sure your device is connected properly)
2.adb reboot bootloader
(to put your device into fastboot mode)
3.fastboot flash recovery_ramdisk DUK-RECOVERY_RAMDISK_NoCheck.img
(to flash the recovery image)
4. fastboot reboot
>>When the device boots up, go to the dialer, type *#*#2846579#*#*
->Click on Software Upgrade -> SDcard upgrade->confirm.
Your phone will recognise the memory card with dload file in it. It will flash the rom. It will get stuck at 99% and shows error. Dont worry, just select reboot system option that appears on the screen.
You will be on the Nougat Rom
To relock the bootloader--
>>Again you have to enable USB debugging from devoloper options>>open command window from the platform tools folder>> execute the commands 1 and 2.
Then type the following command :-
fastboot oem relock *unlock key*
(replace *unlock key* with your unlock key used for bootloader unlock)
YOUR DEVICE WILL BE ON NOUGAT ROM WITH LOCKED BOOTLOADER
As this is my first post, kindly ignore the errors. Sorry if this lengthy post made any confusion. Hope this is helpful to all of you.
Click to expand...
Click to collapse
can I get recovery image file please

[MuXCustoM][ROM]+[Kernel][Z3CTW][ SGP611][23.5.A.1.291][Magisk 20.4][TWRP]

Custom Rom Xperia Z3CTW SGP611 Build 23.5.A.1.291_1290-4947_R2D By Mux
if you have questions or need files just PM me on XDA and i will try to help where i can...
the reason i made this tut is because there is almost no roms for this device available...
(not Responsible for any damages to device or peripherals through the process since there is always a chance something happens **but i had my device in almost every state and with the tools mentioned u should be able to revive it ** )
Included in this ROM (for you to build)
- Passes Saftynet
- Rooted with Magisk 20.4 (magisk hide working)
- Custom Kernel For Booting System and TWRP (made with rootkernel_v4.51_Windows_Linux.zip)
- Sony Ric Disabled / Enabled Depends on Rootkernel Config
- Netflix working
- Kernel can be set to Permissive via Terminal command.
- TWRP 3.0.2 (from Rootkernel_4.5.1)
- Remoteplay only works with Ric enabled and magisk uninstalled (make 2 boot.img for swapping in twrp)(due to sony device)
Apps i sugest u dl on ur rooted device
- FX File explorer
- Terminal for Android
- Netflix
- Vanced Manager
- Busybox (if needed)
IMPORTANT!! This Tutorial Ignores TA Partition So if you want to save them google How to Backup TA for SGP611 Before Following this Tutorial (some functionality can be regained through DRM opt in RootKernel
A Tutorial to Reproduce (*Do not Worry the Harder You Try The easier it gets)
1. Install Drivers for Fastboot and ADB in Device Manager for your device
- Boot Device to Fastboot by pressing Vol+ while Pluging USB Cable to PC Blue led indicates Fastboot Mode
- Go to Device Manager and Install Driver for S1boot
- Verify Driver installed Correctly
2. Install Flashtool Xperifirm, Flashtool Emma from Sony, Xperia Companion, copy Platform-tools folder to C:
(if u need any files PM)
3. Unlock Your Bootloader following instruction on Sony Developer Website (not going in to Details) *read warning above
before this
4. Download FTF firmware file With Flashtool Xperifirm For Your Device in My Case SGP611_23.5.A.1.291_1290-4947_R2D
By selecting XF Button in Flashtool after Closing xperifirm Flashtool will convert the files and they will be stored to
%user%\.flashTool\firmwares
5. Extract Kernel.sin Using 7zip or winrar from SGP611_23.5.A.1.291_1290-4947_R2D.ftf for patching boot.img
6. Open Flashtool and go to Tools menu select Sin Editor search and select the Kernel.sin Previously Extracted and press Extract
Data this will Create Kernel.elf
7. Go to RootKernelv4.51 Folder and copy the Kernel.elf there open CMD in address bar to folder and enter the command
(rootkernel kernel.elf boot.img) Select the option u like by Pressing y I selected all Options because I don’t have TA Backup
this will create a file Boot.img which is your Custom Boot Image if you want Recovery make Shure to say y when asked about
TWRP
8. Open PRFcreator and select all options click on the … for ftf and load the SGP611_23.5.A.1.291_1290-4947_R2D.ftf file
downloaded in step 3 click on the … for SuperSU and select the Magisk_20.4.zip set all check marks and create Flashable Zip
Zip is found in PRFcreator folder (this is your stock firmware zip)
9. Copy all files listed into a folder on your Internal storage
- Flashable-prerooted-signed.zip (created with PRFcreator)
- Moded Boot.img (Created with Rootkernelv4.51)
- Disable_ric_file.zip (if not moded in Boot.img)
- Magisk_20.4.zip (for Flashing Magisk After Flashing Boot.img)
10. Boot Phone in to Fastboot mode, Run CMD in address bar of Platform-tools folder, and Flash twrp 2.8.7.0 (yes will be
updated after Flashing Boot.img) by entering this command in ( Fastboot flash boot twrp-2.8.7.0-scorpion_windy.img )(**this
flashed to boot because u dont have recovery befor flashing the moded boot.img and this will be changed back by flashing
the stock ftf downloaded**)
if successful Unplug and boot tab it should boot to Teamwin TWRP recovery
11. In TWRP go to WIPE, Advanced Wipe, (Wipe: Cache, Dalvik-Cache, and System,)
before Flashing the Firmware Files
12. On main screen TWRP go to INSTALL and Install files following order
- Flashable-prerooted-signed.zip
- Moded Boot.img (by selecting flash image button at the bottom in TWRP)
- Disable_ric_file.zip
- Magisk_20.4.zip
13. Reboot to System Buy yourself a beer and Enjoy

where are the files ?

[INSTRUCTION]How to unpack any firmware from a .ftf file

These instructions are for Windows and any Xperia smartphone
I only have X8 so I'm posting this on the X8 forum
We will need: unyaffs or ext2explore and of course Flashtool
Procedure:
1) open your ftf-file with an archiver
2) Take out our system.sin file.
3) Open flashtool
4) press Tools → SIN Editor
5) specify your system.sin including full path to the file
6) Click Extract Data.
7) wait
8) next to the file system.sin appears system.yaffs, system.yaffs2 or system.ext4 depending on the firmware.
If yaffs or yaffs2 file appears:
9) put next to system.yaffs 2 files from unyaffs.zip (cygwin1.dll and unyaffs.exe)
10) drag and drop system.yaffs or system.yaffs2 onto our unyaffs.exe
11) wait
12) next to our files unpacked partition system
if an ext4 file appears:
9) put next to system.ext4 file from ext2explore-2.2.71.zip
10) Run ext2explore.exe
11) Click File → Open Image and choose our ext4 file
12) Click Save button and it will unpack to whatever location you want.
I used this method to unpack ROMs for X8, X10 and Arc S and it worked

Ulumia said:
These instructions are for Windows and any Xperia smartphone
I only have X8 so I'm posting this on the X8 forum
We will need: unyaffs or ext2explore and of course Flashtool
Procedure:
1) open your ftf-file with an archiver
2) Take out our system.sin file.
3) Open flashtool
4) press Tools → SIN Editor
5) specify your system.sin including full path to the file
6) Click Extract Data.
7) wait
8) next to the file system.sin appears system.yaffs, system.yaffs2 or system.ext4 depending on the firmware.
If yaffs or yaffs2 file appears:
9) put next to system.yaffs 2 files from unyaffs.zip (cygwin1.dll and unyaffs.exe)
10) drag and drop system.yaffs or system.yaffs2 onto our unyaffs.exe
11) wait
12) next to our files unpacked partition system
if an ext4 file appears:
9) put next to system.ext4 file from ext2explore-2.2.71.zip
10) Run ext2explore.exe
11) Click File → Open Image and choose our ext4 file
12) Click Save button and it will unpack to whatever location you want.
I used this method to unpack ROMs for X8, X10 and Arc S and it worked
Click to expand...
Click to collapse