Hello , dear Moto Z users , just few days ago I have released twrp of Moto Z with too much problems , so I just post it's device tree here：https://github.com/kaneawk/android_device_moto_griffin.git .
Now I public a Moto Z XT1650-03_GRIFFIN_RETEU-EMEA_6.0.1_MPL24.246-17 rooted stock rom for you
HTML:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
Removed some unnecessary Google apps and stock apps
Rooted by xbin mode
Replaced unlocked warning logo
Allow any rotations
Change battery saver mode color to #000000
Changelog :
2016.9.24 1.0
Issues:
none
REQUIREMENT:
Unlocked bootloader
Download
https://mega.nz/#F!OtI0nDDC!cNpd9pz_hcqZ8goH-1rD1w
INSTALLATION:
Boot your phone to Fastboot,open ADB stuffs in your computer
1. Flash it under fastboot or flash with RSD
Snapshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CREDITS
[email protected] MotoBootLogoMaker
@Chainfire SuperSU
@tal.aloni SparseConverter
Am I missing something? I don't see the TWRP Beta file download
Will this work for Moto z force, xt-1650
I flashed manually with mfastboot command, many thanks And root works fine. Now i have a issue, when i try to flash boot.img and recovery.img command promp says boot.img and recovery.img are not signed or corrupted, i don't know if thaT matters when i try unlock my phone to use it with other carriers. Cause when i insert a other carrier sim, the phone ask me for a pin of unlock of sim.
nesgcmx said:
Now i have a issue, when i try to flash boot.img and recovery.img command promp says boot.img and recovery.img are not signed or corrupted
Click to expand...
Click to collapse
Does not matter. It just a prompt.
Thanks for the answer. I know this off topic but, you know how I can use my phone with sim of any company without the phone ask me unlock pin? I remember in my previous moto x, was enough unlocking the bootloader but, now is not working.
nesgcmx said:
Thanks for the answer. I know this off topic but, you know how I can use my phone with sim of any company without the phone ask me unlock pin? I remember in my previous moto x, was enough unlocking the bootloader but, now is not working.
Click to expand...
Click to collapse
Yeah, I don't know about the GSM lock on moto z.
Will this work on the verizon moto z play?
drocny87 said:
Will this work on the verizon moto z play?
Click to expand...
Click to collapse
Not at all... for minimum two good reasons:
1) Moto Z Play is a different smartphone from this one (Griffin... Moto Z!)
2) All Verizon versions have unlockable bootloader I think...
So since I have verizon, I'm guessing this wont work for me?
dragonrazorz said:
So since I have verizon, I'm guessing this wont work for me?
Click to expand...
Click to collapse
it did not work for me, Verizon Moto Z.
I think we need the bootloader unlocked to flash a custom recovery
:fingers-crossed:
TwoBuells said:
it did not work for me, Verizon Moto Z.
I think we need the bootloader unlocked to flash a custom recovery
:fingers-crossed:
Click to expand...
Click to collapse
I figured that. Maybe we'll get it later.
TwoBuells said:
it did not work for me, Verizon Moto Z.
I think we need the bootloader unlocked to flash a custom recovery
:fingers-crossed:
Click to expand...
Click to collapse
What do you mean it won't work for you? This is for Moto Z (Griffin).. which is the Moto Z phone on Verizon. So it should work!.. It probably won't work for the Moto Z Force... or am I missing something? Sorry I'm a bit new to Moto Z.
androidbuff123 said:
What do you mean it won't work for you? This is for Moto Z (Griffin).. which is the Moto Z phone on Verizon. So it should work!.. It probably won't work for the Moto Z Force... or am I missing something? Sorry I'm a bit new to Moto Z.
Click to expand...
Click to collapse
I have a Moto Z XT1650 from Best Buy on the Verizon network
I tried AP Fastboot and the file said it didn't match or could not be verified.
On my AP Fastboot Screen it says under
Product/Variant: sheridan XT1650-01
did I maybe get a bad download of the TWRP.img file?
TwoBuells said:
I have a Moto Z XT1650 from Best Buy on the Verizon network
I tried AP Fastboot and the file said it didn't match or could not be verified.
On my AP Fastboot Screen it says under
Product/Variant: sheridan XT1650-01
did I maybe get a bad download of the TWRP.img file?
Click to expand...
Click to collapse
Sheridan is Moto Z Force, not Moto Z which is Griffin, so the official TWRP is not compatible since it has been released for Griffin only.
More, Verizon versions, to date, can't be rooted or use TWRP since the not unlockable bootloader...
My Moto Z is not the force model
TwoBuells said:
My Moto Z is not the force model
Click to expand...
Click to collapse
So... it isn't a Sheridan... :fingers-crossed:
enetec said:
So... it isn't a Sheridan... :fingers-crossed:
Click to expand...
Click to collapse
When I received the OTA updates the files names had Griffin in them.
I was just saying in the above post that on my Fastboot Flash Mode screen it says
Battery OK
oem_locked
connect usb cable, etc
it also has a line that says
Product/Variant: sheridan XT1650-01
go to your AP Fastboot Flash Mode screen and tell me what it says under Product/Vatiant
Just saying......
I could be wrong... I understood that vanilla Moto Z was named Griffin and Force one Sheridan... BUT after that I've found some sites that use the codename Sheridan for both models...
Only one thing is sure at the moment... Play version is Vertex!
I still don't have a Moto Z... I'm waiting for the 64GB Rose Gold one...
What boot.img is used in this rom? Stock or modified? the modified one that have no forceencrypt.
Related
NOTE***********There is a working method for rooting AT&T and Verizon variant. So here is the method http://forum.xda-developers.com/showthread.php?t=2442584,
Justin's method
***************
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.
Hello Everyone this is the tutorial on "How to Root Your Moto X"
.
Before You Begin:
**This method is tested & working on Motorola Moto X Only.**
Windows Based PC or Laptop
Unlock Bootloader of Moto X : See here https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Download & Install Motorola Moto X USB Drivers in your PC , then connect you device to PC with USB cable and let him finish the USB drivers installation..
Enable USB Debugging of your device. From settings.
Make a backup of your device’s data for safety.
Make sure your device is charged 70% minimum.
Download Required Files:
***http://d-h.st/cFB Rogers Moto X Pre-rooted Kernel(For Rogers)"
***http://d-h.st/1XIAT&T Moto X Pre-rooted Kernel(For AT&T)"][/URL]
***http://editandroid.com/wp-content/uploads/2013/08/Fastboot+ADB20926.zipFastboot+ADB(20926)
How To Root Motorola Moto X:
Unlock Bootloader of Motorola Moto X : Click Here
Download and Extract fastboot folder from Fastboot+ADB zip file.
Download the correct kernel for your device.
Copy and paste the downloaded kernel boot img in Fastboot>Win32 folder.(Win32 folder is in the extracted fastboot folder).
Now rename the ghost-boot-new.img (Rogers) or ghost-boot-att.img (AT&T))to kernel.img.
Now boot your device in fastboot mode with your device turn on.Press and hold the Volume Down & Power Button , when the screen turn off leave the power button only and keep hold the Volume Down button.and wait for reboot.Check out this video : Click Here.
Once your device enter in fastboot mode , Connect your moto x to PC with USB cable.
Now open the Fastboot>Win32 folder and press & hold shift key and press right click of mouse while holding shift key.Now you see a new option in right click bar “Open command window here” click on it.
A CMD window will appear on your desktop screen.
Now type fastboot flash boot kernel.img in the cmd window to flash the kernel in your device.
Press & hold power button to turn off your Motorola Moto X.
It's only for advanced users and I am not responsible if your X gets bricked or transforms into a monster and eats up your cat
- CyanogenMod
I LOVE FEEDBACK AND Q&A
If my guide helped you please press thanks.
reserved
am I dreaming or does it really say Root for AT&T??
basedboii said:
am I dreaming or does it really say Root for AT&T??
Click to expand...
Click to collapse
It says it but it still needs a bootloader unlock so doesn't actually work for ATT
Works on rogers, afraik it won't work on at&t & verizon , you're unable to unlock the BOOTLOADER, Hope I'm wrong
Sent on my Moto X
flashallthetime said:
Works on rogers, afraik it won't work on at&t & verizon , you're unable to unlock the BOOTLOADER, Hope I'm wrong
Sent on my Moto X
Click to expand...
Click to collapse
You aren't :crying:
This method doesn't work on AT&T?:what:
Sent from my GT-I9103 using xda app-developers app
Nope. AT&T does not allow bootloader to be unlocked. Please edit your thread title.
need an exploit to work someone delete this thread or edit it!
Sent from my XT1058 using XDA Premium 4 mobile app
Tha TechnoCrat said:
This method doesn't work on AT&T?:what:
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
Unlocking boot loader on ATT variants is not possible yet which is prerequisite to 'how to achieve root' process you posted
kancherlapraneeth said:
Unlocking boot loader on ATT variants is not possible yet which is prerequisite to 'how to achieve root' process you posted
Click to expand...
Click to collapse
What's up Praneeth. Let's hope this happens soon. We need to start bugging Motorola and AT&T about this on public social sites. I've posted on Motorola G+ about it already.
If I were to root using this method, would I be able to receive OTAs?
Sent from my Moto X
Probably you can depending on what you have altered in the system, the ota will erase root , chances are someone will have a rooted version if any ota releases
Sent on my Moto X
bootloopz said:
If I were to root using this method, would I be able to receive OTAs?
Sent from my Moto X
Click to expand...
Click to collapse
most likely.
housry23 said:
What's up Praneeth. Let's hope this happens soon. We need to start bugging Motorola and AT&T about this on public social sites. I've posted on Motorola G+ about it already.
Click to expand...
Click to collapse
let's hope motorola says something about this.
A question, why us Canadians are allowed to unlock our bootloaders ? Our carriers are normal very bad at allowing any alteration, normally our phones have more bloatware than stock Google apps. The only thing which makes sense to me is the Rogers moto x is the developer edition, seems a last minute decision was made but this is all speculation on my part
Sent on my Moto X
flashallthetime said:
A question, why us Canadians are allowed to unlock our bootloaders ? Our carriers are normal very bad at allowing any alteration, normally our phones have more bloatware than stock Google apps. The only thing which makes sense to me is the Rogers moto x is the developer edition, seems a last minute decision was made but this is all speculation on my part
Sent on my Moto X
Click to expand...
Click to collapse
Maybe rogers people are better than those of AT&T
Sent from my GT-I9103 using xda app-developers app
No way rogers is as bad as you can get, for that matter any Canadian carrier. They bend us over and give it to us.
look at it this way at least you still have a warranty
I'm almost positive this was a last minute decision or the initial stock sent our way was just a filler and the Rogers branded bloatware infested moto x is on the next shipment from china
Sent on my Moto X
I have a Rogers Moto X. When I try to unlock the bootloader it says that my device does not qualify for bootloader unlocking. So confused
Sent from my Moto X
Make sure you put all the letters in correct , without spaces also, I had the same issue, just a question, does your moto have a Rogers logo on the back cover?
Sent on my UNLOCKED BOOTLOADER ROOTED Moto X
Just posting my experience of getting a fresh Moto G 16GB that was Tesco purchased - unlocked and to Stock.
I linked to the XDA thread by t-bon3 - which is a great guide.
Here is how it went for me.
First issue that the device is locked to tesco sim cards.
Note: you are not unlocking the bootloader or adding root to the system.
The phone will be exactly as if you bought it from retail, just you got it subsided by Tesco.
I choose these guys to get an unlock code - they seemed professional - I avoid ebay & paypal.
http://www.unlockunit.com/unlock-motorola-moto-g?var=tel
Form filling.......
Phone Model : *Moto G*
Country & Network : *United Kingdom - Tesco Mobile*
IMEI: *XXXXXXXXXXXXXXX*
E-mail: *YourEmail*
I then got 3 Emails.
1: Confirm Order
2: Confirm Payment
3: Unlock code (came 11 minutes after I paid)
There were 2 unlock codes - I put a non-tesco SIM in and was greeted with the prompt - the first code worked.
Then after that I followed this guide to Install the UK Retail firmware
http://forum.xda-developers.com/showthread.php?p=47820707
Files From here
http://sbf.droid-developers.org/phone.php?device=14
I used this one
Android 4.3
Blur_Version.14.71.8.falcon_umts.Retail.en.GB
*Retail UK*
407.3 MiB
40FD34F930D9ADD3AB3F65B5A23FCD00
Simple task, enable USB debugging, reboot into fastboot, run script, reboot.
Now just to wait for the Over The Air 4.4.2 update that is due any day for the UK phones.
http://motorola-blog.blogspot.co.uk/2013/12/the-download-moto-g-gets-android-442.html
$13 dollars, Lol i paid £2.04 for my code got in within in 15minutes
fma965 said:
$13 dollars, Lol i paid £2.04 for my code got in within in 15minutes
Click to expand...
Click to collapse
I am extremely happy for you, why not post where you got it from, so others can benefit.
It's tricky to trust some sites, ebay is a minefield.
sorry my bad forgot to post the link here you go,
http://www.hotukdeals.com/deals/unl...ay-smgreen1969-99-9-positive-feedback-1723545
and the ebay link
http://www.ebay.co.uk/itm/111223239973
please note if it says he is away its due to the backlog and he will be avaliable within a few hours again, additionaly there is another guy who is trustworthy here
http://www.ebay.co.uk/itm/221326995328
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UK Kitkat is coming January according to Cnet btw
King p1n said:
UK Kitkat is coming January according to Cnet btw
Click to expand...
Click to collapse
It was supposed to be January for USA too, but they pushed it early - CNet may not be 100% up-to-date on this.
Edit: The article http://crave.cnet.co.uk/mobiles/motorola-moto-g-android-4-4-2-kitkat-update-begins-50013071/ does say they contacted moto
ARTICLE; said:
I've contacted Motorola to find out if the update is coming to the UK. Update: British phone fans will enjoy KitKat on the Moto G in January.
Click to expand...
Click to collapse
StevenHarperUK said:
It was supposed to be January for USA too, but they pushed it early - CNet may not be 100% up-to-date on this.
Click to expand...
Click to collapse
They edited their article I assume they got the info direct from Motorola
Sorry, but bit of an epic fail all round here. Payed far too much for the unlock and this flash to stock guide is far quicker and easier...
http://www.modaco.com/topic/366786-how-to-flash-to-the-standard-uk-rom/
b1g1an said:
Sorry, but bit of an epic fail all round here. Payed far too much for the unlock and this flash to stock guide is far quicker and easier...
http://www.modaco.com/topic/366786-how-to-flash-to-the-standard-uk-rom/
Click to expand...
Click to collapse
I agree I paid too much.. no going back now.
However I disagree that using a Pseudo Stock Rom is superior to flashing an actual stock ROM
I've repacked the UK ROM with the necessary tools to convert a branded device (e.g. Tesco) to a generic device.
Click to expand...
Click to collapse
Yes I understand it may be very close to the stock ROM, but it still isn't.
StevenHarperUK said:
I choose these guys to get an unlock code - they seemed professional - I avoid ebay & paypal.
http://www.unlockunit.com/unlock-motorola-moto-g?var=tel
Click to expand...
Click to collapse
HOW MUCH!!
Lollingtons!!
StevenHarperUK said:
Yes I understand it may be very close to the stock ROM, but it still isn't.
Click to expand...
Click to collapse
Wrong.
It is a full stock UK ROM. It wouldn't install if it wasn't.
In this case, repacked means adding the proper Moto fastboot tool, and a .bat file to automate the commands.
Appreciate the post, Tesco phone now on stock and unlocked via ebay..... cheers all.
Rusty! said:
Wrong.
It is a full stock UK ROM. It wouldn't install if it wasn't.
In this case, repacked means adding the proper Moto fastboot tool, and a .bat file to automate the commands.
Click to expand...
Click to collapse
Exactly, just does the long winded way from one simple command.
Actually, there is one error in the simple way, if you can call it that, he doesn't say you need to enable usb debugging before you start which might be confusing for noobs.
You don't need to enable it.
Put phone in fastboot, run .bat
Do you guys know if I can flash the US retail rom on my Canadian Koodo Moto g with the bootloader locked?
Try it and see, worst case scenario is it falls to install.
Rusty! said:
Try it and see, worst case scenario is it falls to install.
Click to expand...
Click to collapse
But then would I have to unlock the bootloader?
Not necessarily
My stock rom is not available yet so I would have to unlock the bootloader if it doesn't work. I want to keep my warranty. I will wait it out if I have to.
how to get my old XT1033
hi, i am from india i tried to get standard uk rom on y moto g from the following site
it is successfull and it is showing as XT1032 but now i had many problems so i want to get my mobile to XT1033 how i can do that
please help me if possible please upload sceen shots urgent!!
Hi Guys this a universal method to root all the variants of moto g without messing up the recovery or using superboot.This works on any AOSP rom or Stock Firmwares.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Warning:Unlocking Voids your warranty. You should have an unlocked bootloader to proceed further
Steps
1) Go to fastboot (Vol down+Power)
2) Flash this recovery via fastboot
3) Now go to the recovery (press vol down and then select via vol up)
4) Touch reboot system. It will prompt that su permissions are missing. Tap yes install(xbin/su).
5) Now go to playstore and install supersu app.
6) Congratulations your phone should be successfully rooted
My Special Thanks to
@Phil3759 for his @wesome recovery
XDA:DevDB Information
Root Moto G (1st Gen), ROM for the Moto G
Contributors
Falcon G
ROM OS Version: 4.4.x KitKat
Version Information
Status: Testing
Created 2014-11-13
Last Updated 2014-11-13
Q1:Will this Work on the XT1028?
Ans:yes it will
Q1:Will this Work on the 4G MOTO G?
Ans:No, as we don't have philz recovery for it.
anyone tried this yet
recovery
thanks a lot.
the method worked and liked the recovery a lot
thanks
-AK
akshay.ku said:
thanks a lot.
the method worked and liked the recovery a lot
thanks
-AK
Click to expand...
Click to collapse
Thanks For testing
Falcon G said:
Hi Guys this a universal method to root all the variants of moto g without messing up the recovery or using superboot.This works on any AOSP rom or Stock Firmwares.
Warning:Unlocking Voids your warranty. You should have an unlocked bootloader to proceed further
Steps
1) Go to fastboot (Vol down+Power)
2) Flash this recovery via fastboot
3) Now go to the recovery (press vol down and then select via vol up)
4) Touch reboot system. It will prompt that su permissions are missing. Tap yes install(xbin/su).
5) Now go to playstore and install supersu app.
6) Congratulations your phone should be successfully rooted
My Special Thanks to
@Phil3759 for his @wesome recovery
Click to expand...
Click to collapse
Sent from my XT1032 using XDA Free mobile app
Will this work on the XT1028?
Kwipper said:
Will this work on the XT1028?
Click to expand...
Click to collapse
No it has a locked bootloader
Falcon G said:
No it has a locked bootloader
Click to expand...
Click to collapse
Hehe. The OP may want to change his thing to say "All variants of the Moto G (EXCEPT THE XT1028 because it has a locked bootloader)" just to eliminate confusion.
Kwipper said:
Hehe. The OP may want to change his thing to say "All variants of the Moto G (EXCEPT THE XT1028 because it has a locked bootloader)" just to eliminate confusion.
Click to expand...
Click to collapse
Read the OP
Warning:Unlocking Voids your warranty. You should have an unlocked bootloader to proceed further
Click to expand...
Click to collapse
Also added this in the FAQ
OTA effects
Will this method affect any OTA updates?
Falcon G said:
Hi Guys this a universal method to root all the variants of moto g without messing up the recovery or using superboot.This works on any AOSP rom or Stock Firmwares.
Warning:Unlocking Voids your warranty. You should have an unlocked bootloader to proceed further
Steps
1) Go to fastboot (Vol down+Power)
2) Flash this recovery via fastboot
3) Now go to the recovery (press vol down and then select via vol up)
4) Touch reboot system. It will prompt that su permissions are missing. Tap yes install(xbin/su).
5) Now go to playstore and install supersu app.
6) Congratulations your phone should be successfully rooted
My Special Thanks to
@Phil3759 for his @wesome recovery
Click to expand...
Click to collapse
This should be more clear, for the new ones, it's confusing..the bootloader MUST be unlocked, which does not mean all models/variants..it works with (bootloader unlocked) devices ONLY..
The word "all" is misleading..
Sent from my 4.4.3_21.23.4
(Unlocked) XT1045 Moto G 4G LTE
http://waynekent.com/page6.html
---------- Post added at 10:45 PM ---------- Previous post was at 10:38 PM ----------
Krix876 said:
Will this method affect any OTA updates?
Click to expand...
Click to collapse
Any modification such as a recovery change, or a Root exploit ABSOLUTELY does effect an OTA..a boot loop can be expected..most OS modifications that are not compliant with the OTA will MOST likely create a boot loop..this is a well known fact..and the device will (most likely) be rendered useless as a cell phone..
Sent from my 4.4.3_21.23.4
(Unlocked) XT1045 Moto G 4G LTE
http://waynekent.com/page6.html
I'm gonna update this thread soon. Please wait I am rectifying some other problems
Hey buddy, can you provide me a proper tutorial link to root the phone?? Its x1033..how to check if bootloader is locked or unlocked??
Sent from my Samsung Galaxy S4 Mini GT-I9505 using XDA Free mobile app
All variants? then why isn't my XT1039 listed in the compatibility support of that recovery?
"xt1028, xt1031, xt1032, xt1033, xt1034"
Triggeh said:
All variants? then why isn't my XT1039 listed in the compatibility support of that recovery?
"xt1028, xt1031, xt1032, xt1033, xt1034"
Click to expand...
Click to collapse
Is yours one of the new 4G LTE variations? If so it's because this thread was originally created before that variant came out and it hasn't been tested with your XT1039.
Sent from my Moto G, XT1034, using Tapatalk
alfick3 said:
Is yours one of the new 4G LTE variations? If so it's because this thread was originally created before that variant came out and it hasn't been tested with your XT1039.
Sent from my Moto G, XT1034, using Tapatalk
Click to expand...
Click to collapse
Yes it is a 4g version but the thread is titled "All variants of the moto g" it should be changed because this is the general moto g section which applies to both the 4g and original models.
I apolize in advance if this question has already been covered but I have an unlocked verizion g will this work? Ive googled and all the root and recovery methods dont seem to apply.
dobbs69 said:
I apolize in advance if this question has already been covered but I have an unlocked verizion g will this work? Ive googled and all the root and recovery methods dont seem to apply.
Click to expand...
Click to collapse
If you have an unlocked XT1028, then Root is obtained thru a custom recovery, (example) TWRP or the other one..there is a specific TWRP version for the "falcon".. which the XT1028 is a "falcon" device..
You would no longer use the "stock" recovery..
Sent from my:
(Jaocagomex debloated)
4.4_19.6.3 (Unlocked)
XT1080M Droid Maxx #2
http://waynekent.com/page6.html
anyone have tried for XT1033 asian retail and rooted succesfully?
i want to root my xt1033
Remove Unlocked Bootloader Warning - Moto G (2nd Gen)
Device Logo: Moto G (2nd Gen) "titan" - (Stock from XT1069)
Same as stock logo, from original firmware, Lollipop 5.0.2.
For those who have unlocked the bootloader from their Moto G (2nd Gen), and want to remove that awkward warning.
This is not the same as fix logo provided by MotoTools. This logo is extracted from Moto G (2nd Gen) stock firmware.
Stock Unlocked Bootloader Warning:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After flashing this file, your new boot logo will be like:
Instructions:
1. Download .bin file from link provided below.
2. Put in same folder as mfastboot files. (Download mfastboot from here.)
2. Flash logo.bin with fastboot.
Code:
mfastboot.exe flash logo logo.bin
DOWNLOAD LINK: Mega - logo.bin File
It works.
Thanks
alvarezpja said:
It works.
Thanks
Click to expand...
Click to collapse
So, please, hit THANKS button, above! :good:
im guessing there is no way of getting rid of the "warning unlock bootloader" sign? before i relocked my bootloader i flashed the remove unlock bootloader warning.zip file and it worked,but after i relocked my bootloader the warning sign popped up again..
Try with Moto Tool AIO V3 (under Tools choose Fix boot logo)
Because, when you relocked, you probably flashed stock logo again... Try reflashing the custom logo.
I have updated the phone, now the bootloader warning is red.... can I install this fix?
RastaFATian said:
I have updated the phone, now the bootloader warning is red.... can I install this fix?
Click to expand...
Click to collapse
Yes you can. Working fine here.
Notice: Improvements to 10 Post Rule
A New Q & A thread has been created in the Q&A, Help & Troubleshooting Sub-Forum, for This Topic.
New Discussion and Q & A Tabs have also been created, located just under threads Title when viewing in a Browser.
Posts from members with less than 10 posts will automatically be posted in the new Q & A thread.
Please check it out, and see if you can help out someone with a question about this Topic.
For more about this new feature see: Improvements to 10 Post Rule
Quick question: What if my "bootloader unlock" warning is blue, not red? I remember it being red on my Moto X 2013, but on the Moto G 2014 it's blue. Does it symbolize something?
lesiki said:
Quick question: What if my "bootloader unlock" warning is blue, not red? I remember it being red on my Moto X 2013, but on the Moto G 2014 it's blue. Does it symbolize something?
Click to expand...
Click to collapse
Nope... AFAIK it means nothing!
On my Moto G 2014, before OTA update logo was blue...
After OTA update, it became red.
Good night,
Just a quick question,
Does it works on XT1063 ?,
Thanks
psycho1200 said:
Good night,
Just a quick question,
Does it works on XT1063 ?,
Thanks
Click to expand...
Click to collapse
Most probably it should. It isnt device specific. Just for moto g 2014. Any region. It should work on all variants of moto g 2014
koradiavatsal said:
Most probably it should. It isnt device specific. Just for moto g 2014. Any region. It should work on all variants of moto g 2014
Click to expand...
Click to collapse
Thanks for your quick answer, o just flashed and it worked,
Worked great. Thanks!
@rafaelbrunner Did you tweak the bootlogo or did you simply extract the original non-unlocked bootlogo? If you tweaked the files yourself, what about doing a darker version? Rebooting in the night is a pain.
lesiki said:
@rafaelbrunner Did you tweak the bootlogo or did you simply extract the original non-unlocked bootlogo? If you tweaked the files yourself, what about doing a darker version? Rebooting in the night is a pain.
Click to expand...
Click to collapse
I only removed the Unlocked Warning from the default logo.
In fact, you can use any logo you want...
Below, I made you the M boot logo with a black background... Give it a try:
http://www.tusfiles.net/lrc2jmasje2y - .bin (flash with fastboot)
http://www.tusfiles.net/ko07eaarchb6 - .zip (flash with TWRP/CWM)
rafaelbrunner said:
Below, I made you the M boot logo with a black background.
Click to expand...
Click to collapse
Thanks! I'd love to try it, but unfortunately the website keeps trying to download an .exe file.
Not that I'm concerned, that virus won't run on my Linux machine anyways. But could you upload the file somewhere else, like MEGA or Google Drive?
---------- Post added at 04:11 PM ---------- Previous post was at 04:06 PM ----------
Edit: Managed to download the file now, nevertheless I'd recommend using a better file hoster next time. We don't want to spread malware on XDA, do we?
Edit: Thanks, nice boot logo! There's a small red border around the M, do you think you can fix that?
Also, include the logo into your OP, I am sure many people would prefer a dark one over a white one.
Glad I found this thread. Worked perfectly on XT1063 after Lollipop 22.21.16 upgrade!
Hello everyone. o/
So I bought this phone recently, the model number is 1650-04, It's a dual-sim 32GB/3GB variant, I couldn't find anything about it online. When I try software update, it says the device is up to date, while it's on marshmallow. So how can I upgrade this to nougat? Can I just use another version's ROM? say 1650-05?
Thanks in advance.
It is Moto Z but not Z force. You are searching wrong forum.
Sent from my XT1650 using XDA-Developers Legacy app
robdevil said:
It is Moto Z but not Z force. You are searching wrong forum.
Sent from my XT1650 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Well, no. It's definitely a z force in all ways no doubt
Musketeer7 said:
Well, no. It's definitely a z force in all ways no doubt
Click to expand...
Click to collapse
Moto Z force is exclusive to Verizon and not sold by anyone else under any other variant.
here some screetshots for proof
https://ibb.co/mqmR1Q
https://ibb.co/d9R4o5
Can you upload pictures? Can you unlock bootloader? And where you got this phone from?
robdevil said:
Can you upload pictures? Can you unlock bootloader? And where you got this phone from?
Click to expand...
Click to collapse
I bought it from downtown market. what kind of picture? btw i can't see the bootloader status, when I dial the *#*# thing, it just wipes and nothing shows up also holding power+vol down while turned off didn't take me to the recovery mode, i tried it only once tho.
forgot to mention I'm from Iran xD
It is 100% fake. Motorola Z Force is sold only as single sim by Verizon and there is no point to downgrade to 3GB ram for dual sim. What CPU it has got? Try CPU Z app.
Sent from my Nexus 6 using XDA-Developers Legacy app
robdevil said:
It is 100% fake. Motorola Z Force is sold only as single sim by Verizon and there is no point to downgrade to 3GB ram for dual sim. What CPU it has got? Try CPU Z app.
Sent from my Nexus 6 using XDA-Developers Legacy app
Click to expand...
Click to collapse
https://ibb.co/i87vBQ
https://ibb.co/fHp8WQ
https://ibb.co/ndzWkk
other than fake, is there any way to upgrade to nogaut?
Musketeer7 said:
https://ibb.co/i87vBQ
https://ibb.co/fHp8WQ
https://ibb.co/ndzWkk
other than fake, is there any way to upgrade to nogaut?
Click to expand...
Click to collapse
If you can not boot to fast-boot like any other Motorola then no.
It looks legit from screenshots but all that can be managed by buildprop modification.
Go to developer settings switch OEM unlock on and USB debugging on.
Type in ADB console: adb reboot bootloader
Phone should reboot to fastboot.
Try to flash dual sim model firmware via fastboot commands( search on XDA).
It could be Chinese version ( announced some time ago to go live in Sept) that would explain dual sim availability.
Can you register it on Motorola website and check warranty? Did you check imei? Try imei.info
robdevil said:
If you can not boot to fast-boot like any other Motorola then no.
It looks legit from screenshots but all that can be managed by buildprop modification.
Go to developer settings switch OEM unlock on and USB debugging on.
Type in ADB console: adb reboot bootloader
Phone should reboot to fastboot.
Try to flash dual sim model firmware via fastboot commands( search on XDA).
It could be Chinese version ( announced some time ago to go live in Sept) that would explain dual sim availability.
Can you register it on Motorola website and check warranty? Did you check imei? Try imei.info
Click to expand...
Click to collapse
ty very much, the adb command worked and it goes into fastboot menu. but i couldn't get the unlock data string, because apparently it doesn't recognize the phone as fastboot. any fastboot command says "waiting for any device"
Check device drivers if fastboot is installed correctly.
Sent from my SM-G950F using XDA-Developers Legacy app
I have same phone 1650-04 dual sim already update on 7.0 March security update as well
Send from my Moto Z Force
Where you got this phone from?
Sent from my LG-H840 using XDA-Developers Legacy app
Adil01 said:
I have same phone 1650-04 dual sim already update on 7.0 March security update as well
Send from my Moto Z Force
Click to expand...
Click to collapse
did u update it or it was already on 7 when u got it?
Yes I update 6.0 to 7.0 ..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Send from my Moto Z Force
Adil01 said:
Yes I update 6.0 to 7.0 ..
View attachment 4133395View attachment 4133396
Send from my Moto Z Force
Click to expand...
Click to collapse
That's fantastic could u give me a hint where to look for it?
Flash any dual sim ROM and it should be ok. XT1650-04 is not retail version. It is motorola test phone, dual sim Z Force is not officially supported or sold.
Sent from my XT1650 using XDA-Developers Legacy app
robdevil said:
Flash any dual sim ROM and it should be ok. XT1650-04 is not retail version. It is motorola test phone, dual sim Z Force is not officially supported or sold.
Sent from my XT1650 using XDA-Developers Legacy app
Click to expand...
Click to collapse
ok thanks, but with any dual sim rom, u mean any other phone's rom? like moto z dual sim? because i couldnt find any dmoto z force dual sim rom
Yes. Try retail euro ROM or any other whichever is better for your region. Or try to use update shortcut in settings. Can you unlock bootloader or is it unlocked already in engineering mode?
Sent from my XT1650 using XDA-Developers Legacy app